Convert PXA2xx GPIOs and SCOOP GPIOs to a qemu_irq based api (similar to omap, max731...

Convert spitz and gumstix boards to use new api.
Remove now obsolete gpio_handler_t definition.

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3670 c046a42c-6fe2-441c-8c8c-71466251a162

diff --git a/hw/gumstix.c b/hw/gumstix.c
index a8f8a2f..235bd2e 100644 (file)
--- a/hw/gumstix.c
+++ b/hw/gumstix.c
@@ -10,13 +10,6 @@
 
 #include "vl.h"
 
-static void connex_smc_irq(void *opaque, int line, int level)
-{
-    /* Interrupt line of NIC is connected to GPIO line 36 */
-    struct pxa2xx_state_s *cpu = (struct pxa2xx_state_s *) opaque;
-    pxa2xx_gpio_set(cpu->gpio, 36, level);
-}
-
 /* Board init. */
 enum gumstix_model_e { connex };
 
@@ -52,8 +45,9 @@ static void gumstix_common_init(int ram_size, int vga_ram_size,
 
     cpu->env->regs[15] = 0x00000000;
 
-    qemu_irq *irq = qemu_allocate_irqs(connex_smc_irq, cpu, 1);
-    smc91c111_init(&nd_table[0], 0x04000300, *irq);
+    /* Interrupt line of NIC is connected to GPIO line 36 */
+    smc91c111_init(&nd_table[0], 0x04000300,
+                    pxa2xx_gpio_in_get(cpu->gpio)[36]);
 }
 
 static void connex_init(int ram_size, int vga_ram_size,

diff --git a/hw/pxa.h b/hw/pxa.h
index 5eb6a59..da8da5d 100644 (file)
--- a/hw/pxa.h
+++ b/hw/pxa.h
@@ -72,11 +72,10 @@ void pxa27x_timer_init(target_phys_addr_t base, qemu_irq *irqs, qemu_irq irq4);
 struct pxa2xx_gpio_info_s;
 struct pxa2xx_gpio_info_s *pxa2xx_gpio_init(target_phys_addr_t base,
                 CPUState *env, qemu_irq *pic, int lines);
-void pxa2xx_gpio_set(struct pxa2xx_gpio_info_s *s, int line, int level);
-void pxa2xx_gpio_handler_set(struct pxa2xx_gpio_info_s *s, int line,
-                gpio_handler_t handler, void *opaque);
-void pxa2xx_gpio_read_notifier(struct pxa2xx_gpio_info_s *s,
-                void (*handler)(void *opaque), void *opaque);
+qemu_irq *pxa2xx_gpio_in_get(struct pxa2xx_gpio_info_s *s);
+void pxa2xx_gpio_out_set(struct pxa2xx_gpio_info_s *s,
+                int line, qemu_irq handler);
+void pxa2xx_gpio_read_notifier(struct pxa2xx_gpio_info_s *s, qemu_irq handler);
 
 /* pxa2xx_dma.c */
 struct pxa2xx_dma_state_s;
@@ -90,8 +89,7 @@ void pxa2xx_dma_request(struct pxa2xx_dma_state_s *s, int req_num, int on);
 struct pxa2xx_lcdc_s;
 struct pxa2xx_lcdc_s *pxa2xx_lcdc_init(target_phys_addr_t base,
                 qemu_irq irq, DisplayState *ds);
-void pxa2xx_lcd_vsync_cb(struct pxa2xx_lcdc_s *s,
-                void (*cb)(void *opaque), void *opaque);
+void pxa2xx_lcd_vsync_notifier(struct pxa2xx_lcdc_s *s, qemu_irq handler);
 void pxa2xx_lcdc_oritentation(void *opaque, int angle);
 
 /* pxa2xx_mmci.c */
@@ -126,6 +124,7 @@ struct pxa2xx_fir_s;
 struct pxa2xx_state_s {
     CPUState *env;
     qemu_irq *pic;
+    qemu_irq reset;
     struct pxa2xx_dma_state_s *dma;
     struct pxa2xx_gpio_info_s *gpio;
     struct pxa2xx_lcdc_s *lcd;
@@ -209,6 +208,4 @@ struct pxa2xx_state_s *pxa270_init(unsigned int sdram_size, DisplayState *ds,
                 const char *revision);
 struct pxa2xx_state_s *pxa255_init(unsigned int sdram_size, DisplayState *ds);
 
-void pxa2xx_reset(int line, int level, void *opaque);
-
 #endif /* PXA_H */

diff --git a/hw/pxa2xx.c b/hw/pxa2xx.c
index 62c396c..9f7771f 100644 (file)
--- a/hw/pxa2xx.c
+++ b/hw/pxa2xx.c
@@ -2013,9 +2013,10 @@ static struct pxa2xx_fir_s *pxa2xx_fir_init(target_phys_addr_t base,
     return s;
 }
 
-void pxa2xx_reset(int line, int level, void *opaque)
+static void pxa2xx_reset(void *opaque, int line, int level)
 {
     struct pxa2xx_state_s *s = (struct pxa2xx_state_s *) opaque;
+
     if (level && (s->pm_regs[PCFR >> 2] & 0x10)) {     /* GPR_EN */
         cpu_reset(s->env);
         /* TODO: reset peripherals */
@@ -2046,6 +2047,8 @@ struct pxa2xx_state_s *pxa270_init(unsigned int sdram_size,
     register_savevm("cpu", 0, ARM_CPU_SAVE_VERSION, cpu_save, cpu_load,
                     s->env);
 
+    s->reset = qemu_allocate_irqs(pxa2xx_reset, s, 1)[0];
+
     /* SDRAM & Internal Memory Storage */
     cpu_register_physical_memory(PXA2XX_SDRAM_BASE,
                     sdram_size, qemu_ram_alloc(sdram_size) | IO_MEM_RAM);
@@ -2139,7 +2142,7 @@ struct pxa2xx_state_s *pxa270_init(unsigned int sdram_size,
 
     /* GPIO1 resets the processor */
     /* The handler can be overridden by board-specific code */
-    pxa2xx_gpio_handler_set(s->gpio, 1, pxa2xx_reset, s);
+    pxa2xx_gpio_out_set(s->gpio, 1, s->reset);
     return s;
 }
 
@@ -2161,6 +2164,8 @@ struct pxa2xx_state_s *pxa255_init(unsigned int sdram_size,
     register_savevm("cpu", 0, ARM_CPU_SAVE_VERSION, cpu_save, cpu_load,
                     s->env);
 
+    s->reset = qemu_allocate_irqs(pxa2xx_reset, s, 1)[0];
+
     /* SDRAM & Internal Memory Storage */
     cpu_register_physical_memory(PXA2XX_SDRAM_BASE, sdram_size,
                     qemu_ram_alloc(sdram_size) | IO_MEM_RAM);
@@ -2253,6 +2258,6 @@ struct pxa2xx_state_s *pxa255_init(unsigned int sdram_size,
 
     /* GPIO1 resets the processor */
     /* The handler can be overridden by board-specific code */
-    pxa2xx_gpio_handler_set(s->gpio, 1, pxa2xx_reset, s);
+    pxa2xx_gpio_out_set(s->gpio, 1, s->reset);
     return s;
 }

diff --git a/hw/pxa2xx_gpio.c b/hw/pxa2xx_gpio.c
index 723b1c1..b6e598a 100644 (file)
--- a/hw/pxa2xx_gpio.c
+++ b/hw/pxa2xx_gpio.c
@@ -16,6 +16,7 @@ struct pxa2xx_gpio_info_s {
     qemu_irq *pic;
     int lines;
     CPUState *cpu_env;
+    qemu_irq *in;
 
     /* XXX: GNU C vectors are more suitable */
     uint32_t ilevel[PXA2XX_GPIO_BANKS];
@@ -28,13 +29,8 @@ struct pxa2xx_gpio_info_s {
     uint32_t gafr[PXA2XX_GPIO_BANKS * 2];
 
     uint32_t prev_level[PXA2XX_GPIO_BANKS];
-    struct {
-        gpio_handler_t fn;
-        void *opaque;
-    } handler[PXA2XX_GPIO_BANKS * 32];
-
-    void (*read_notify)(void *opaque);
-    void *opaque;
+    qemu_irq handler[PXA2XX_GPIO_BANKS * 32];
+    qemu_irq read_notify;
 };
 
 static struct {
@@ -86,12 +82,13 @@ static void pxa2xx_gpio_irq_update(struct pxa2xx_gpio_info_s *s)
 }
 
 /* Bitmap of pins used as standby and sleep wake-up sources.  */
-const int pxa2xx_gpio_wake[PXA2XX_GPIO_BANKS] = {
+static const int pxa2xx_gpio_wake[PXA2XX_GPIO_BANKS] = {
     0x8003fe1b, 0x002001fc, 0xec080000, 0x0012007f,
 };
 
-void pxa2xx_gpio_set(struct pxa2xx_gpio_info_s *s, int line, int level)
+static void pxa2xx_gpio_set(void *opaque, int line, int level)
 {
+    struct pxa2xx_gpio_info_s *s = (struct pxa2xx_gpio_info_s *) opaque;
     int bank;
     uint32_t mask;
 
@@ -130,9 +127,7 @@ static void pxa2xx_gpio_handler_update(struct pxa2xx_gpio_info_s *s) {
         for (diff = s->prev_level[i] ^ level; diff; diff ^= 1 << bit) {
             bit = ffs(diff) - 1;
             line = bit + 32 * i;
-            if (s->handler[line].fn)
-                s->handler[line].fn(line, (level >> bit) & 1,
-                                s->handler[line].opaque);
+            qemu_set_irq(s->handler[line], (level >> bit) & 1);
         }
 
         s->prev_level[i] = level;
@@ -173,8 +168,7 @@ static uint32_t pxa2xx_gpio_read(void *opaque, target_phys_addr_t offset)
     case GPLR:         /* GPIO Pin-Level registers */
         ret = (s->olevel[bank] & s->dir[bank]) |
                 (s->ilevel[bank] & ~s->dir[bank]);
-        if (s->read_notify)
-            s->read_notify(s->opaque);
+        qemu_irq_raise(s->read_notify);
         return ret;
 
     case GEDR:         /* GPIO Edge Detect Status registers */
@@ -312,6 +306,7 @@ struct pxa2xx_gpio_info_s *pxa2xx_gpio_init(target_phys_addr_t base,
     s->pic = pic;
     s->lines = lines;
     s->cpu_env = env;
+    s->in = qemu_allocate_irqs(pxa2xx_gpio_set, s, lines);
 
     iomemtype = cpu_register_io_memory(0, pxa2xx_gpio_readfn,
                     pxa2xx_gpio_writefn, s);
@@ -323,23 +318,27 @@ struct pxa2xx_gpio_info_s *pxa2xx_gpio_init(target_phys_addr_t base,
     return s;
 }
 
-void pxa2xx_gpio_handler_set(struct pxa2xx_gpio_info_s *s, int line,
-                gpio_handler_t handler, void *opaque) {
+qemu_irq *pxa2xx_gpio_in_get(struct pxa2xx_gpio_info_s *s)
+{
+    return s->in;
+}
+
+void pxa2xx_gpio_out_set(struct pxa2xx_gpio_info_s *s,
+                int line, qemu_irq handler)
+{
     if (line >= s->lines) {
         printf("%s: No GPIO pin %i\n", __FUNCTION__, line);
         return;
     }
 
-    s->handler[line].fn = handler;
-    s->handler[line].opaque = opaque;
+    s->handler[line] = handler;
 }
 
 /*
  * Registers a callback to notify on GPLR reads.  This normally
  * shouldn't be needed but it is used for the hack on Spitz machines.
  */
-void pxa2xx_gpio_read_notifier(struct pxa2xx_gpio_info_s *s,
-                void (*handler)(void *opaque), void *opaque) {
+void pxa2xx_gpio_read_notifier(struct pxa2xx_gpio_info_s *s, qemu_irq handler)
+{
     s->read_notify = handler;
-    s->opaque = opaque;
 }

diff --git a/hw/pxa2xx_lcd.c b/hw/pxa2xx_lcd.c
index 2c10963..7ae9ba6 100644 (file)
--- a/hw/pxa2xx_lcd.c
+++ b/hw/pxa2xx_lcd.c
@@ -62,8 +62,7 @@ struct pxa2xx_lcdc_s {
         uint32_t command;
     } dma_ch[7];
 
-    void (*vsync_cb)(void *opaque);
-    void *opaque;
+    qemu_irq vsync_cb;
     int orientation;
 };
 
@@ -865,8 +864,7 @@ static void pxa2xx_update_display(void *opaque)
         dpy_update(s->ds, 0, miny, s->xres, maxy);
     pxa2xx_lcdc_int_update(s);
 
-    if (s->vsync_cb)
-        s->vsync_cb(s->opaque);
+    qemu_irq_raise(s->vsync_cb);
 }
 
 static void pxa2xx_invalidate_display(void *opaque)
@@ -1042,8 +1040,7 @@ struct pxa2xx_lcdc_s *pxa2xx_lcdc_init(target_phys_addr_t base, qemu_irq irq,
     return s;
 }
 
-void pxa2xx_lcd_vsync_cb(struct pxa2xx_lcdc_s *s,
-                void (*cb)(void *opaque), void *opaque) {
-    s->vsync_cb = cb;
-    s->opaque = opaque;
+void pxa2xx_lcd_vsync_notifier(struct pxa2xx_lcdc_s *s, qemu_irq handler)
+{
+    s->vsync_cb = handler;
 }

diff --git a/hw/spitz.c b/hw/spitz.c
index 764b694..73dccc9 100644 (file)
--- a/hw/spitz.c
+++ b/hw/spitz.c
@@ -217,7 +217,9 @@ static const int spitz_gpiomap[5] = {
 static int spitz_gpio_invert[5] = { 0, 0, 0, 0, 0, };
 
 struct spitz_keyboard_s {
-    struct pxa2xx_state_s *cpu;
+    qemu_irq sense[SPITZ_KEY_SENSE_NUM];
+    qemu_irq *strobe;
+    qemu_irq gpiomap[5];
     int keymap[0x80];
     uint16_t keyrow[SPITZ_KEY_SENSE_NUM];
     uint16_t strobe_state;
@@ -240,28 +242,23 @@ static void spitz_keyboard_sense_update(struct spitz_keyboard_s *s)
         if (strobe) {
             sense |= 1 << i;
             if (!(s->sense_state & (1 << i)))
-                pxa2xx_gpio_set(s->cpu->gpio, spitz_gpio_key_sense[i], 1);
+                qemu_irq_raise(s->sense[i]);
         } else if (s->sense_state & (1 << i))
-            pxa2xx_gpio_set(s->cpu->gpio, spitz_gpio_key_sense[i], 0);
+            qemu_irq_lower(s->sense[i]);
     }
 
     s->sense_state = sense;
 }
 
-static void spitz_keyboard_strobe(int line, int level,
-                struct spitz_keyboard_s *s)
+static void spitz_keyboard_strobe(void *opaque, int line, int level)
 {
-    int i;
-    for (i = 0; i < SPITZ_KEY_STROBE_NUM; i ++)
-        if (spitz_gpio_key_strobe[i] == line) {
-            if (level)
-                s->strobe_state |= 1 << i;
-            else
-                s->strobe_state &= ~(1 << i);
-
-            spitz_keyboard_sense_update(s);
-            break;
-        }
+    struct spitz_keyboard_s *s = (struct spitz_keyboard_s *) opaque;
+
+    if (level)
+        s->strobe_state |= 1 << line;
+    else
+        s->strobe_state &= ~(1 << line);
+    spitz_keyboard_sense_update(s);
 }
 
 static void spitz_keyboard_keydown(struct spitz_keyboard_s *s, int keycode)
@@ -272,8 +269,7 @@ static void spitz_keyboard_keydown(struct spitz_keyboard_s *s, int keycode)
 
     /* Handle the additional keys */
     if ((spitz_keycode >> 4) == SPITZ_KEY_SENSE_NUM) {
-        pxa2xx_gpio_set(s->cpu->gpio, spitz_gpiomap[spitz_keycode & 0xf],
-                        (keycode < 0x80) ^
+        qemu_set_irq(s->gpiomap[spitz_keycode & 0xf], (keycode < 0x80) ^
                         spitz_gpio_invert[spitz_keycode & 0xf]);
         return;
     }
@@ -486,7 +482,6 @@ static void spitz_keyboard_register(struct pxa2xx_state_s *cpu)
     s = (struct spitz_keyboard_s *)
             qemu_mallocz(sizeof(struct spitz_keyboard_s));
     memset(s, 0, sizeof(struct spitz_keyboard_s));
-    s->cpu = cpu;
 
     for (i = 0; i < 0x80; i ++)
         s->keymap[i] = -1;
@@ -495,9 +490,16 @@ static void spitz_keyboard_register(struct pxa2xx_state_s *cpu)
             if (spitz_keymap[i][j] != -1)
                 s->keymap[spitz_keymap[i][j]] = (i << 4) | j;
 
+    for (i = 0; i < SPITZ_KEY_SENSE_NUM; i ++)
+        s->sense[i] = pxa2xx_gpio_in_get(cpu->gpio)[spitz_gpio_key_sense[i]];
+
+    for (i = 0; i < 5; i ++)
+        s->gpiomap[i] = pxa2xx_gpio_in_get(cpu->gpio)[spitz_gpiomap[i]];
+
+    s->strobe = qemu_allocate_irqs(spitz_keyboard_strobe, s,
+                    SPITZ_KEY_STROBE_NUM);
     for (i = 0; i < SPITZ_KEY_STROBE_NUM; i ++)
-        pxa2xx_gpio_handler_set(cpu->gpio, spitz_gpio_key_strobe[i],
-                        (gpio_handler_t) spitz_keyboard_strobe, s);
+        pxa2xx_gpio_out_set(cpu->gpio, spitz_gpio_key_strobe[i], s->strobe[i]);
 
     spitz_keyboard_pre_map(s);
     qemu_add_kbd_event_handler((QEMUPutKBDEvent *) spitz_keyboard_handler, s);
@@ -510,15 +512,13 @@ static void spitz_keyboard_register(struct pxa2xx_state_s *cpu)
 
 struct scoop_info_s {
     target_phys_addr_t target_base;
+    qemu_irq handler[16];
+    qemu_irq *in;
     uint16_t status;
     uint16_t power;
     uint32_t gpio_level;
     uint32_t gpio_dir;
     uint32_t prev_level;
-    struct {
-        gpio_handler_t fn;
-        void *opaque;
-    } handler[16];
 
     uint16_t mcr;
     uint16_t cdr;
@@ -548,9 +548,7 @@ static inline void scoop_gpio_handler_update(struct scoop_info_s *s) {
 
     for (diff = s->prev_level ^ level; diff; diff ^= 1 << bit) {
         bit = ffs(diff) - 1;
-        if (s->handler[bit].fn)
-            s->handler[bit].fn(bit, (level >> bit) & 1,
-                            s->handler[bit].opaque);
+        qemu_set_irq(s->handler[bit], (level >> bit) & 1);
     }
 
     s->prev_level = level;
@@ -648,12 +646,9 @@ CPUWriteMemoryFunc *scoop_writefn[] = {
     scoop_writeb,
 };
 
-static inline void scoop_gpio_set(struct scoop_info_s *s, int line, int level)
+static void scoop_gpio_set(void *opaque, int line, int level)
 {
-    if (line >= 16) {
-        spitz_printf("No GPIO pin %i\n", line);
-        return;
-    }
+    struct scoop_info_s *s = (struct scoop_info_s *) s;
 
     if (level)
         s->gpio_level |= (1 << line);
@@ -661,15 +656,19 @@ static inline void scoop_gpio_set(struct scoop_info_s *s, int line, int level)
         s->gpio_level &= ~(1 << line);
 }
 
-static inline void scoop_gpio_handler_set(struct scoop_info_s *s, int line,
-                gpio_handler_t handler, void *opaque) {
+static inline qemu_irq *scoop_gpio_in_get(struct scoop_info_s *s)
+{
+    return s->in;
+}
+
+static inline void scoop_gpio_out_set(struct scoop_info_s *s, int line,
+                qemu_irq handler) {
     if (line >= 16) {
         spitz_printf("No GPIO pin %i\n", line);
         return;
     }
 
-    s->handler[line].fn = handler;
-    s->handler[line].opaque = opaque;
+    s->handler[line] = handler;
 }
 
 static void scoop_save(QEMUFile *f, void *opaque)
@@ -723,6 +722,7 @@ static struct scoop_info_s *spitz_scoop_init(struct pxa2xx_state_s *cpu,
     s[0].status = 0x02;
     s[1].status = 0x02;
 
+    s[0].in = qemu_allocate_irqs(scoop_gpio_set, &s[0], 16);
     iomemtype = cpu_register_io_memory(0, scoop_readfn,
                     scoop_writefn, &s[0]);
     cpu_register_physical_memory(s[0].target_base, 0x1000, iomemtype);
@@ -731,6 +731,7 @@ static struct scoop_info_s *spitz_scoop_init(struct pxa2xx_state_s *cpu,
     if (count < 2)
         return s;
 
+    s[1].in = qemu_allocate_irqs(scoop_gpio_set, &s[1], 16);
     iomemtype = cpu_register_io_memory(0, scoop_readfn,
                     scoop_writefn, &s[1]);
     cpu_register_physical_memory(s[1].target_base, 0x1000, iomemtype);
@@ -760,7 +761,7 @@ static void spitz_bl_update(struct pxa2xx_state_s *s)
         spitz_printf("LCD Backlight now off\n");
 }
 
-static void spitz_bl_bit5(int line, int level, void *opaque)
+static inline void spitz_bl_bit5(void *opaque, int line, int level)
 {
     int prev = bl_intensity;
 
@@ -773,7 +774,7 @@ static void spitz_bl_bit5(int line, int level, void *opaque)
         spitz_bl_update((struct pxa2xx_state_s *) opaque);
 }
 
-static void spitz_bl_power(int line, int level, void *opaque)
+static inline void spitz_bl_power(void *opaque, int line, int level)
 {
     bl_power = !!level;
     spitz_bl_update((struct pxa2xx_state_s *) opaque);
@@ -841,14 +842,19 @@ static void corgi_ssp_write(void *opaque, uint32_t value)
         max111x_write(max1111, value);
 }
 
-static void corgi_ssp_gpio_cs(int line, int level, struct pxa2xx_state_s *s)
+static void corgi_ssp_gpio_cs(void *opaque, int line, int level)
 {
-    if (line == SPITZ_GPIO_LCDCON_CS)
+    switch (line) {
+    case 0:
         lcd_en = !level;
-    else if (line == SPITZ_GPIO_ADS7846_CS)
+        break;
+    case 1:
         ads_en = !level;
-    else if (line == SPITZ_GPIO_MAX1111_CS)
+        break;
+    case 2:
         max_en = !level;
+        break;
+    }
 }
 
 #define MAX1111_BATT_VOLT      1
@@ -859,7 +865,7 @@ static void corgi_ssp_gpio_cs(int line, int level, struct pxa2xx_state_s *s)
 #define SPITZ_BATTERY_VOLT     0xd0    /* About 4.0V */
 #define SPITZ_CHARGEON_ACIN    0x80    /* About 5.0V */
 
-static void spitz_adc_temp_on(int line, int level, void *opaque)
+static void spitz_adc_temp_on(void *opaque, int line, int level)
 {
     if (!max1111)
         return;
@@ -870,12 +876,6 @@ static void spitz_adc_temp_on(int line, int level, void *opaque)
         max111x_set_input(max1111, MAX1111_BATT_TEMP, 0);
 }
 
-static void spitz_pendown_set(void *opaque, int line, int level)
-{
-    struct pxa2xx_state_s *cpu = (struct pxa2xx_state_s *) opaque;
-    pxa2xx_gpio_set(cpu->gpio, SPITZ_GPIO_TP_INT, level);
-}
-
 static void spitz_ssp_save(QEMUFile *f, void *opaque)
 {
     qemu_put_be32(f, lcd_en);
@@ -898,9 +898,11 @@ static int spitz_ssp_load(QEMUFile *f, void *opaque, int version_id)
 
 static void spitz_ssp_attach(struct pxa2xx_state_s *cpu)
 {
+    qemu_irq *chipselects;
+
     lcd_en = ads_en = max_en = 0;
 
-    ads7846 = ads7846_init(qemu_allocate_irqs(spitz_pendown_set, cpu, 1)[0]);
+    ads7846 = ads7846_init(pxa2xx_gpio_in_get(cpu->gpio)[SPITZ_GPIO_TP_INT]);
 
     max1111 = max1111_init(0);
     max111x_set_input(max1111, MAX1111_BATT_VOLT, SPITZ_BATTERY_VOLT);
@@ -910,12 +912,10 @@ static void spitz_ssp_attach(struct pxa2xx_state_s *cpu)
     pxa2xx_ssp_attach(cpu->ssp[CORGI_SSP_PORT - 1], corgi_ssp_read,
                     corgi_ssp_write, cpu);
 
-    pxa2xx_gpio_handler_set(cpu->gpio, SPITZ_GPIO_LCDCON_CS,
-                    (gpio_handler_t) corgi_ssp_gpio_cs, cpu);
-    pxa2xx_gpio_handler_set(cpu->gpio, SPITZ_GPIO_ADS7846_CS,
-                    (gpio_handler_t) corgi_ssp_gpio_cs, cpu);
-    pxa2xx_gpio_handler_set(cpu->gpio, SPITZ_GPIO_MAX1111_CS,
-                    (gpio_handler_t) corgi_ssp_gpio_cs, cpu);
+    chipselects = qemu_allocate_irqs(corgi_ssp_gpio_cs, cpu, 3);
+    pxa2xx_gpio_out_set(cpu->gpio, SPITZ_GPIO_LCDCON_CS,  chipselects[0]);
+    pxa2xx_gpio_out_set(cpu->gpio, SPITZ_GPIO_ADS7846_CS, chipselects[1]);
+    pxa2xx_gpio_out_set(cpu->gpio, SPITZ_GPIO_MAX1111_CS, chipselects[2]);
 
     bl_intensity = 0x20;
     bl_power = 0;
@@ -945,7 +945,7 @@ static void spitz_microdrive_attach(struct pxa2xx_state_s *cpu)
 #define SPITZ_GPIO_WM  5
 
 #ifdef HAS_AUDIO
-static void spitz_wm8750_addr(int line, int level, void *opaque)
+static void spitz_wm8750_addr(void *opaque, int line, int level)
 {
     i2c_slave *wm = (i2c_slave *) opaque;
     if (level)
@@ -970,8 +970,9 @@ static void spitz_i2c_setup(struct pxa2xx_state_s *cpu)
     /* Attach a WM8750 to the bus */
     wm = wm8750_init(bus, audio);
 
-    spitz_wm8750_addr(0, 0, wm);
-    pxa2xx_gpio_handler_set(cpu->gpio, SPITZ_GPIO_WM, spitz_wm8750_addr, wm);
+    spitz_wm8750_addr(wm, 0, 0);
+    pxa2xx_gpio_out_set(cpu->gpio, SPITZ_GPIO_WM,
+                    qemu_allocate_irqs(spitz_wm8750_addr, wm, 1)[0]);
     /* .. and to the sound interface.  */
     cpu->i2s->opaque = wm;
     cpu->i2s->codec_out = wm8750_dac_dat;
@@ -989,24 +990,31 @@ static void spitz_akita_i2c_setup(struct pxa2xx_state_s *cpu)
 
 /* Other peripherals */
 
-static void spitz_charge_switch(int line, int level, void *opaque)
+static void spitz_out_switch(void *opaque, int line, int level)
 {
-    spitz_printf("Charging %s.\n", level ? "off" : "on");
-}
-
-static void spitz_discharge_switch(int line, int level, void *opaque)
-{
-    spitz_printf("Discharging %s.\n", level ? "on" : "off");
-}
-
-static void spitz_greenled_switch(int line, int level, void *opaque)
-{
-    spitz_printf("Green LED %s.\n", level ? "on" : "off");
-}
-
-static void spitz_orangeled_switch(int line, int level, void *opaque)
-{
-    spitz_printf("Orange LED %s.\n", level ? "on" : "off");
+    switch (line) {
+    case 0:
+        spitz_printf("Charging %s.\n", level ? "off" : "on");
+        break;
+    case 1:
+        spitz_printf("Discharging %s.\n", level ? "on" : "off");
+        break;
+    case 2:
+        spitz_printf("Green LED %s.\n", level ? "on" : "off");
+        break;
+    case 3:
+        spitz_printf("Orange LED %s.\n", level ? "on" : "off");
+        break;
+    case 4:
+        spitz_bl_bit5(opaque, line, level);
+        break;
+    case 5:
+        spitz_bl_power(opaque, line, level);
+        break;
+    case 6:
+        spitz_adc_temp_on(opaque, line, level);
+        break;
+    }
 }
 
 #define SPITZ_SCP_LED_GREEN            1
@@ -1027,24 +1035,19 @@ static void spitz_orangeled_switch(int line, int level, void *opaque)
 static void spitz_scoop_gpio_setup(struct pxa2xx_state_s *cpu,
                 struct scoop_info_s *scp, int num)
 {
-    scoop_gpio_handler_set(&scp[0], SPITZ_SCP_CHRG_ON,
-                    spitz_charge_switch, cpu);
-    scoop_gpio_handler_set(&scp[0], SPITZ_SCP_JK_B,
-                    spitz_discharge_switch, cpu);
-    scoop_gpio_handler_set(&scp[0], SPITZ_SCP_LED_GREEN,
-                    spitz_greenled_switch, cpu);
-    scoop_gpio_handler_set(&scp[0], SPITZ_SCP_LED_ORANGE,
-                    spitz_orangeled_switch, cpu);
+    qemu_irq *outsignals = qemu_allocate_irqs(spitz_out_switch, cpu, 8);
+
+    scoop_gpio_out_set(&scp[0], SPITZ_SCP_CHRG_ON, outsignals[0]);
+    scoop_gpio_out_set(&scp[0], SPITZ_SCP_JK_B, outsignals[1]);
+    scoop_gpio_out_set(&scp[0], SPITZ_SCP_LED_GREEN, outsignals[2]);
+    scoop_gpio_out_set(&scp[0], SPITZ_SCP_LED_ORANGE, outsignals[3]);
 
     if (num >= 2) {
-        scoop_gpio_handler_set(&scp[1], SPITZ_SCP2_BACKLIGHT_CONT,
-                        spitz_bl_bit5, cpu);
-        scoop_gpio_handler_set(&scp[1], SPITZ_SCP2_BACKLIGHT_ON,
-                        spitz_bl_power, cpu);
+        scoop_gpio_out_set(&scp[1], SPITZ_SCP2_BACKLIGHT_CONT, outsignals[4]);
+        scoop_gpio_out_set(&scp[1], SPITZ_SCP2_BACKLIGHT_ON, outsignals[5]);
     }
 
-    scoop_gpio_handler_set(&scp[0], SPITZ_SCP_ADC_TEMP_ON,
-                    spitz_adc_temp_on, cpu);
+    scoop_gpio_out_set(&scp[0], SPITZ_SCP_ADC_TEMP_ON, outsignals[6]);
 }
 
 #define SPITZ_GPIO_HSYNC               22
@@ -1057,40 +1060,30 @@ static void spitz_scoop_gpio_setup(struct pxa2xx_state_s *cpu,
 #define SPITZ_GPIO_CF2_IRQ             106
 #define SPITZ_GPIO_CF2_CD              93
 
-int spitz_hsync;
+static int spitz_hsync;
 
-static void spitz_lcd_hsync_handler(void *opaque)
+static void spitz_lcd_hsync_handler(void *opaque, int line, int level)
 {
     struct pxa2xx_state_s *cpu = (struct pxa2xx_state_s *) opaque;
-    pxa2xx_gpio_set(cpu->gpio, SPITZ_GPIO_HSYNC, spitz_hsync);
+    qemu_set_irq(pxa2xx_gpio_in_get(cpu->gpio)[SPITZ_GPIO_HSYNC], spitz_hsync);
     spitz_hsync ^= 1;
 }
 
 static void spitz_mmc_coverswitch_change(void *opaque, int in)
 {
     struct pxa2xx_state_s *cpu = (struct pxa2xx_state_s *) opaque;
-    pxa2xx_gpio_set(cpu->gpio, SPITZ_GPIO_SD_DETECT, in);
+    qemu_set_irq(pxa2xx_gpio_in_get(cpu->gpio)[SPITZ_GPIO_SD_DETECT], in);
 }
 
 static void spitz_mmc_writeprotect_change(void *opaque, int wp)
 {
     struct pxa2xx_state_s *cpu = (struct pxa2xx_state_s *) opaque;
-    pxa2xx_gpio_set(cpu->gpio, SPITZ_GPIO_SD_WP, wp);
-}
-
-static void spitz_pcmcia_cb(void *opaque, int line, int level)
-{
-    struct pxa2xx_state_s *cpu = (struct pxa2xx_state_s *) opaque;
-    static const int gpio_map[] = {
-        SPITZ_GPIO_CF1_IRQ, SPITZ_GPIO_CF1_CD,
-        SPITZ_GPIO_CF2_IRQ, SPITZ_GPIO_CF2_CD,
-    };
-    pxa2xx_gpio_set(cpu->gpio, gpio_map[line], level);
+    qemu_set_irq(pxa2xx_gpio_in_get(cpu->gpio)[SPITZ_GPIO_SD_WP], wp);
 }
 
 static void spitz_gpio_setup(struct pxa2xx_state_s *cpu, int slots)
 {
-    qemu_irq *pcmcia_cb;
+    qemu_irq lcd_hsync;
     /*
      * Bad hack: We toggle the LCD hsync GPIO on every GPIO status
      * read to satisfy broken guests that poll-wait for hsync.
@@ -1098,25 +1091,29 @@ static void spitz_gpio_setup(struct pxa2xx_state_s *cpu, int slots)
      * wouldn't guarantee that a guest ever exits the loop.
      */
     spitz_hsync = 0;
-    pxa2xx_gpio_read_notifier(cpu->gpio, spitz_lcd_hsync_handler, cpu);
-    pxa2xx_lcd_vsync_cb(cpu->lcd, spitz_lcd_hsync_handler, cpu);
+    lcd_hsync = qemu_allocate_irqs(spitz_lcd_hsync_handler, cpu, 1)[0];
+    pxa2xx_gpio_read_notifier(cpu->gpio, lcd_hsync);
+    pxa2xx_lcd_vsync_notifier(cpu->lcd, lcd_hsync);
 
     /* MMC/SD host */
     pxa2xx_mmci_handlers(cpu->mmc, cpu, spitz_mmc_writeprotect_change,
                     spitz_mmc_coverswitch_change);
 
     /* Battery lock always closed */
-    pxa2xx_gpio_set(cpu->gpio, SPITZ_GPIO_BAT_COVER, 1);
+    qemu_irq_raise(pxa2xx_gpio_in_get(cpu->gpio)[SPITZ_GPIO_BAT_COVER]);
 
     /* Handle reset */
-    pxa2xx_gpio_handler_set(cpu->gpio, SPITZ_GPIO_ON_RESET, pxa2xx_reset, cpu);
+    pxa2xx_gpio_out_set(cpu->gpio, SPITZ_GPIO_ON_RESET, cpu->reset);
 
     /* PCMCIA signals: card's IRQ and Card-Detect */
-    pcmcia_cb = qemu_allocate_irqs(spitz_pcmcia_cb, cpu, slots * 2);
     if (slots >= 1)
-        pxa2xx_pcmcia_set_irq_cb(cpu->pcmcia[0], pcmcia_cb[0], pcmcia_cb[1]);
+        pxa2xx_pcmcia_set_irq_cb(cpu->pcmcia[0],
+                        pxa2xx_gpio_in_get(cpu->gpio)[SPITZ_GPIO_CF1_IRQ],
+                        pxa2xx_gpio_in_get(cpu->gpio)[SPITZ_GPIO_CF1_CD]);
     if (slots >= 2)
-        pxa2xx_pcmcia_set_irq_cb(cpu->pcmcia[1], pcmcia_cb[2], pcmcia_cb[3]);
+        pxa2xx_pcmcia_set_irq_cb(cpu->pcmcia[1],
+                        pxa2xx_gpio_in_get(cpu->gpio)[SPITZ_GPIO_CF2_IRQ],
+                        pxa2xx_gpio_in_get(cpu->gpio)[SPITZ_GPIO_CF2_CD]);
 
     /* Initialise the screen rotation related signals */
     spitz_gpio_invert[3] = 0;  /* Always open */
@@ -1125,8 +1122,10 @@ static void spitz_gpio_setup(struct pxa2xx_state_s *cpu, int slots)
     } else {                   /* Portrait mode */
         spitz_gpio_invert[4] = 1;
     }
-    pxa2xx_gpio_set(cpu->gpio, SPITZ_GPIO_SWA, spitz_gpio_invert[3]);
-    pxa2xx_gpio_set(cpu->gpio, SPITZ_GPIO_SWB, spitz_gpio_invert[4]);
+    qemu_set_irq(pxa2xx_gpio_in_get(cpu->gpio)[SPITZ_GPIO_SWA],
+                    spitz_gpio_invert[3]);
+    qemu_set_irq(pxa2xx_gpio_in_get(cpu->gpio)[SPITZ_GPIO_SWB],
+                    spitz_gpio_invert[4]);
 }
 
 /* Write the bootloader parameters memory area.  */

diff --git a/vl.h b/vl.h
index 752bccd..326f92f 100644 (file)
--- a/vl.h
+++ b/vl.h
@@ -1420,9 +1420,6 @@ void ecc_reset(struct ecc_state_s *s);
 void ecc_put(QEMUFile *f, struct ecc_state_s *s);
 void ecc_get(QEMUFile *f, struct ecc_state_s *s);
 
-/* GPIO */
-typedef void (*gpio_handler_t)(int line, int level, void *opaque);
-
 /* ads7846.c */
 struct ads7846_state_s;
 uint32_t ads7846_read(void *opaque);