--- /dev/null
+# Makefile.in for GNUPLOT documentation
+#
+# Note that the top-level file for documentation is gnuplot.doc.
+# See README.
+#
+# To print manual:
+#
+# For LaTeX
+# make gnuplot.dvi
+# (print or view gnuplot.dvi)
+# or (requires pdflatex)
+# make pdf
+# (print or view gnuplot.pdf)
+# or
+# make ps
+# (print or view gnuplot.ps)
+#
+# For groff (GNU troff}
+# make grotxt
+# (print or view gnuplot.txt)
+# or
+# make grodvi
+# (print or view gnuplot.dvi)
+# or
+# make grops
+# (print or view gnuplot.ps)
+#
+# For nroff
+# make gnuplot.nroff
+# (print or view gnuplot.nroff)
+#
+# For troff
+# make "TROFF=itroff" troff (use your troff here)
+#
+# For GNU info (texinfo)
+# make info
+#
+
+# default is what is needed for interactive gnuplot
+all: gnuplot.gih
+
+# this tells GNU make not to export variables into the environment
+# But other makes dont understand its significance, so it must
+# not be the first target in the file. So it is here, before
+# any variables are created, but after the default target
+.NOEXPORT:
+
+SHELL = /bin/sh
+
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+bindir = @bindir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+infodir = @infodir@
+srcdir = @srcdir@
+top_builddir = ..
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+
+INFO_DEPS = $(srcdir)/gnuplot.info
+
+CC = @CC@
+CPP = @CPP@
+DEFS = @DEFS@
+DEFAULT_INCLUDES = -I. -I$(srcdir) -I.. -I$(top_builddir)
+CPPFLAGS = @CPPFLAGS@
+CFLAGS = @CFLAGS@
+GIHDIR = @GIHDIR@
+INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/term
+LDFLAGS = @LDFLAGS@
+LIBS = @LIBS@
+
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(CPPFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(CCLD) $(CFLAGS) $(LDFLAGS) -o $@
+
+.c.o:
+ $(COMPILE) -c $<
+
+# The makeinfo command from GNU texinfo
+MAKEINFO = @MAKEINFO@
+
+# Required for the temporary .info file fix
+EMACS = @EMACS@
+
+# substitute your troff command (and any flags) for this one
+TROFF = @TROFF@
+
+# LaTeX command, either latex or latex2e or no
+LATEX = @LATEX@
+
+# PlainTeX
+PLAINTEX = @PLAINTEX@
+
+# PDFLaTeX command
+PDFLATEX = @PDFLATEX@
+
+# substitute your DVI to PostScript conversion program here
+DVIPS = @DVIPS@
+
+T = $(top_srcdir)/term/
+CORETERM = $(T)aed.trm $(T)ai.trm $(T)amiga.trm $(T)apollo.trm \
+$(T)aquaterm.trm $(T)atariaes.trm $(T)atarivdi.trm $(T)be.trm $(T)cgi.trm \
+$(T)cgm.trm $(T)corel.trm $(T)debug.trm $(T)djsvga.trm $(T)dumb.trm \
+$(T)dxf.trm $(T)dxy.trm $(T)eepic.trm $(T)emf.trm $(T)emxvga.trm \
+$(T)epson.trm $(T)excl.trm $(T)fg.trm $(T)fig.trm $(T)gd.trm \
+$(T)ggi.trm $(T)gnugraph.trm $(T)gpic.trm $(T)gpr.trm \
+$(T)grass.trm $(T)hp26.trm $(T)hp2648.trm $(T)hp500c.trm $(T)hpgl.trm \
+$(T)hpljii.trm $(T)hppj.trm $(T)imagen.trm $(T)iris4d.trm $(T)kyo.trm \
+$(T)latex.trm $(T)linux.trm $(T)mac.trm $(T)metafont.trm $(T)metapost.trm \
+$(T)mgr.trm $(T)mif.trm $(T)multitos.trm $(T)next.trm $(T)openstep.trm \
+$(T)pbm.trm $(T)pc.trm $(T)pdf.trm $(T)pm.trm $(T)post.trm \
+$(T)pslatex.trm $(T)pstricks.trm $(T)qms.trm $(T)regis.trm $(T)rgip.trm \
+$(T)sun.trm $(T)svg.trm $(T)t410x.trm $(T)tek.trm \
+$(T)texdraw.trm $(T)tgif.trm $(T)tkcanvas.trm $(T)tpic.trm $(T)unixpc.trm \
+$(T)unixplot.trm $(T)v384.trm $(T)vgagl.trm $(T)vws.trm $(T)win.trm \
+$(T)wxt.trm $(T)x11.trm $(T)xlib.trm
+
+DIST_COMMON = README Makefile.in
+
+SOURCES = checkdoc.c doc2gih.c doc2hlp.c doc2ipf.c doc2ms.c doc2rnh.c \
+doc2rtf.c doc2tex.c termdoc.c xref.c
+
+TERM_H = $(top_srcdir)/src/term.h
+
+BUILT_SOURCES = allterm.h
+
+HEADERS = doc2x.h xref.h
+
+EXTRA_DIST = doc2texi.el gnuplot.doc gnuplot.texi gpcard.tex makefile.ami \
+makefile.dst titlepag.ipf titlepag.ms titlepag.tex toc_entr.sty old psdoc \
+faq-ja.tex gnuplot-ja.doc README.ja term-ja.diff
+
+CLEANFILES = doc2tex gnuplot.tex gnuplot.dvi gnuplot.aux gnuplot.log \
+gnuplot.toc gnuplot.pdf gnuplot.ps gpcard.dvi gpcard.log gpcard.ps alldoc2gih \
+doc2gih gnuplot.gih doc2hlp gnuplot.hlp gnuplot.idx gnuplot.ilg gnuplot.ind \
+gnuplot.info* gnuplot.out doc2ipf gnuplot.ipf doc2ms gnuplot.ms doc2rnh \
+gnuplot.rnh doc2rtf gnuplot.rtf gnuplot.nroff checkdoc gnuplot.txt
+
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(EXTRA_DIST)
+
+allterm.h: $(CORETERM)
+ @echo "Building allterm.h"
+ @for e in `egrep "^[ ]*START_HELP" $(CORETERM) |\
+ LC_ALL=C sort -f -t':' -k2` ; do \
+ f=`echo $$e |cut -d\: -f1` ; s=`echo $$e | cut -d\: -f2` ;\
+ sed -n "/^[ ]*$$s/,/^[ ]*END_HELP/p" $$f ; \
+ done >$@
+
+# HBB 20041111: commented out, since it's no longer used.
+#term.h: $(CORETERM)
+# @echo "Building term.h"
+# @cat ../config.h $(CORETERM) > term.c
+# $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(CPPFLAGS) -DTERM_DRIVER_H -DTERM_HELP term.c | \
+# sed '/^ *$$/d;/^#/d' >$@
+# @rm -f term.c
+
+# for debugging
+alldoc: check dvi gih hlp html info ipf ms nroff pdf ps rnh rtf
+
+### [tn]roff documentation
+troff: gnuplot.ms titlepag.ms
+ @if [ "$(srcdir)" = "$(top_builddir)" ] ; then \
+ tbl gnuplot.ms | eqn | $(TROFF) -ms ; \
+ else \
+ < gnuplot.ms sed "s,titlepag\.ms,$(srcdir)/titlepag\.ms," |\
+ tbl | eqn | $(TROFF) -ms ; \
+ fi
+
+nroff: gnuplot.nroff
+
+gnuplot.nroff: gnuplot.ms titlepag.ms
+ @if [ "$(srcdir)" = "$(top_builddir)" ] ; then \
+ tbl gnuplot.ms | neqn | nroff -ms | col > gnuplot.nroff ; \
+ else \
+ < gnuplot.ms sed "s,titlepag\.ms,$(srcdir)/titlepag\.ms," |\
+ tbl | neqn | nroff -ms | col > gnuplot.nroff ; \
+ fi
+
+### groff documentation
+
+groff: grotxt grodvi grops
+
+grotxt: gnuplot.ms titlepag.ms
+ @if [ "$(srcdir)" = "$(top_builddir)" ] ; then \
+ groff -s -p -t -e -ms -Tlatin1 gnuplot.ms > gnuplot.txt ; \
+ else \
+ sed "s,titlepag\.ms,$(srcdir)/titlepag\.ms," gnuplot.ms |\
+ groff -s -p -t -e -ms -Tlatin1 gnuplot.ms > gnuplot.txt ; \
+ fi
+
+grodvi: gnuplot.ms titlepag.ms
+ @if [ "$(srcdir)" = "$(top_builddir)" ] ; then \
+ groff -s -p -t -e -ms -Tdvi gnuplot.ms > gnuplot.dvi ; \
+ else \
+ sed "s,titlepag\.ms,$(srcdir)/titlepag\.ms," gnuplot.ms |\
+ groff -s -p -t -e -ms -Tdvi gnuplot.ms > gnuplot.dvi ; \
+ fi
+
+grops: gnuplot.ms titlepag.ms
+ @if [ "$(srcdir)" = "$(top_builddir)" ] ; then \
+ groff -s -p -t -e -ms -Tps gnuplot.ms > gnuplot.ps ; \
+ else \
+ sed "s,titlepag\.ms,$(srcdir)/titlepag\.ms," gnuplot.ms |\
+ groff -s -p -t -e -ms -Tps gnuplot.ms > gnuplot.ps ; \
+ fi
+
+### doc2xxx dependencies
+ms: gnuplot.ms
+
+gnuplot.ms: doc2ms $(srcdir)/gnuplot.doc
+ ./doc2ms $(srcdir)/gnuplot.doc gnuplot.ms
+
+doc2ms: doc2ms.o termdoc.o
+ $(LINK) doc2ms.o termdoc.o $(LIBS)
+
+doc2ms.o: doc2ms.c $(BUILT_SOURCES)
+ $(COMPILE) -DALL_TERM_DOC -c $(srcdir)/doc2ms.c
+
+### html
+html: htmldocs/gnuplot.html
+
+# requires makeinfo (GNU texinfo) 4.0 or better
+# htmldocs/gnuplot.html: $(srcdir)/gnuplot.texi
+# $(MAKEINFO) --html -I$(srcdir) $(srcdir)/gnuplot.texi --no-split --output=$@
+
+# TeX itself does a better job these days, and doesn't depend on having
+# emacs around to do lisp pre-processing
+htmldocs/gnuplot.html: $(srcdir)/gnuplot.tex
+ mkdir -p htmldocs
+ latex2html -dir htmldocs -local_icons gnuplot
+
+### PDF documentation
+pdf: gnuplot.pdf
+
+gnuplot.pdf: gnuplot.tex
+ @if test $(PDFLATEX) != no ; then \
+ rm -f gnuplot.idx ; \
+ touch gnuplot.idx ; \
+ TEXINPUTS=.:$(srcdir):$(top_srcdir):${TEXINPUTS}: $(PDFLATEX) gnuplot ; \
+ TEXINPUTS=.:$(srcdir):$(top_srcdir):${TEXINPUTS}: $(PDFLATEX) gnuplot ; \
+ TEXINPUTS=.:$(srcdir):$(top_srcdir):${TEXINPUTS}: $(PDFLATEX) gnuplot ; \
+ makeindex gnuplot ; \
+ TEXINPUTS=.:$(srcdir):$(top_srcdir):${TEXINPUTS}: $(PDFLATEX) gnuplot ; \
+ else \
+ echo pdflatex not found - cannot build pdf file ; \
+ fi
+
+### LaTeX documentation
+tex: gnuplot.tex
+
+gnuplot.tex: doc2tex $(srcdir)/gnuplot.doc
+ ./doc2tex $(srcdir)/gnuplot.doc gnuplot.tex
+
+doc2tex: doc2tex.o termdoc.o
+ $(LINK) doc2tex.o termdoc.o $(LIBS)
+
+doc2tex.o: doc2tex.c $(BUILT_SOURCES)
+ $(COMPILE) -DALL_TERM_DOC -c $(srcdir)/doc2tex.c
+
+# this is how to make DVI files
+dvi: gnuplot.dvi gpcard.dvi
+
+gnuplot.dvi: gnuplot.tex titlepag.tex toc_entr.sty
+ @if test $(LATEX) != no ; then \
+ rm -f gnuplot.idx ; \
+ touch gnuplot.idx ; \
+ TEXINPUTS=.:$(srcdir):$(top_srcdir):${TEXINPUTS}: $(LATEX) gnuplot ; \
+ TEXINPUTS=.:$(srcdir):$(top_srcdir):${TEXINPUTS}: $(LATEX) gnuplot ; \
+ TEXINPUTS=.:$(srcdir):$(top_srcdir):${TEXINPUTS}: $(LATEX) gnuplot ; \
+ makeindex gnuplot ; \
+ TEXINPUTS=.:$(srcdir):$(top_srcdir):${TEXINPUTS}: $(LATEX) gnuplot ; \
+ else \
+ echo "latex not found - cannot build dvi file" ; \
+ fi
+
+gpcard.dvi: gpcard.tex
+ @if test $(PLAINTEX) != no ; then \
+ TEXINPUTS=.:$(srcdir):$(top_srcdir): tex gpcard ; \
+ else \
+ echo "plaintex not found - cannot build dvi file" ; \
+ fi
+
+### Postscript format
+# if pslatex has been installed, add "times" to titlepage.tex
+ps: gnuplot.ps gpcard.ps
+
+gnuplot.ps: gnuplot.dvi
+ @if test $(DVIPS) != no ; then \
+ $(DVIPS) gnuplot.dvi -o gnuplot.ps ; \
+ else \
+ echo "dvips not found - cannot build PS file" ; \
+ fi
+
+gpcard.ps: gpcard.dvi
+ @if test $(DVIPS) != no ; then \
+ $(DVIPS) gpcard.dvi -o gpcard.ps ; \
+ else \
+ echo "dvips not found - cannot build PS file" ; \
+ fi
+
+
+# this is how to make gnuplot.hlp
+hlp: gnuplot.hlp
+
+gnuplot.hlp: doc2hlp $(srcdir)/gnuplot.doc
+ ./doc2hlp $(srcdir)/gnuplot.doc gnuplot.hlp
+
+doc2hlp: doc2hlp.o termdoc.o
+ $(LINK) doc2hlp.o termdoc.o $(LIBS)
+
+### gnuplot interactive help format
+gih: gnuplot.gih
+
+gnuplot.gih: doc2gih $(srcdir)/gnuplot.doc
+ @rm -f alldoc2gih
+ ./doc2gih $(srcdir)/gnuplot.doc gnuplot.gih
+
+doc2gih: doc2gih.o termdoc.o
+ $(LINK) doc2gih.o termdoc.o $(LIBS)
+
+# To include all terminals in the .gih file
+allgih: alldoc2gih $(srcdir)/gnuplot.doc
+ @rm -f doc2gih
+ ./alldoc2gih $(srcdir)/gnuplot.doc gnuplot.gih
+
+alldoc2gih: alldoc2gih.o termdoc.o
+ $(LINK) alldoc2gih.o termdoc.o $(LIBS)
+
+alldoc2gih.o: doc2gih.c $(BUILT_SOURCES)
+ $(COMPILE) -DALL_TERM_DOC -c $(srcdir)/doc2gih.c
+ @mv doc2gih.o alldoc2gih.o
+
+### GNU info format
+info: gnuplot.info
+
+gnuplot.info: $(srcdir)/gnuplot.texi
+ $(MAKEINFO) -I$(srcdir) $(srcdir)/gnuplot.texi --no-split --output=$@
+
+# Thanks to Bruce Ravel for doc2texi.el!
+$(srcdir)/gnuplot.texi: $(srcdir)/doc2texi.el $(srcdir)/gnuplot.doc
+ @echo "Creating texinfo"
+ @if test "$(EMACS)" != no; then \
+ cd $(srcdir) ; \
+ $(EMACS) -batch -l doc2texi.el -f d2t-doc-to-texi ; \
+ else \
+ echo "No emacs found - cannot create texinfo file" ; \
+ fi
+
+# this is how to make OS/2 ipfc documentation
+ipf: gnuplot.ipf
+
+gnuplot.ipf: doc2ipf $(srcdir)/gnuplot.doc
+ ./doc2ipf $(srcdir)/gnuplot.doc gnuplot.ipf
+
+doc2ipf: doc2ipf.o termdoc.o xref.o
+ $(LINK) doc2ipf.o termdoc.o xref.o $(LIBS)
+
+### Rich Text Format
+rtf: gnuplot.rtf
+
+gnuplot.rtf: doc2rtf $(srcdir)/gnuplot.doc
+ ./doc2rtf $(srcdir)/gnuplot.doc gnuplot.rtf
+
+doc2rtf: doc2rtf.o termdoc.o xref.o
+ $(LINK) doc2rtf.o termdoc.o xref.o $(LIBS)
+
+# this is how to make rnh documentation (VMS help format)
+rnh: gnuplot.rnh
+
+gnuplot.rnh: doc2rnh $(srcdir)/gnuplot.doc
+ ./doc2rnh $(srcdir)/gnuplot.doc gnuplot.rnh
+
+doc2rnh: doc2rnh.o termdoc.o
+ $(LINK) doc2rnh.o termdoc.o $(LIBS)
+
+### AmigaGuide(R) format
+## requires the GG version of makeinfo
+#guide: gnuplot.guide
+#
+#gnuplot.guide: $(srcdir)/gnuplot.texi $(srcdir)/gnuplot.doc
+# $(MAKEINFO) --amiga -I$(srcdir) $(srcdir)/gnuplot.texi --no-split --output=$@
+#
+# end doc2xxx section
+
+# this is how to check the gnuplot.doc file
+check: all checkdoc
+ @./checkdoc < $(srcdir)/gnuplot.doc; \
+ if test $$? -eq 0; then \
+ echo "PASS: gnuplot.doc"; \
+ else \
+ :; \
+ fi
+
+checkdoc: checkdoc.o termdoc.o $(srcdir)/gnuplot.doc
+ $(LINK) checkdoc.o termdoc.o $(LIBS)
+
+checkdoc.o: checkdoc.c $(BUILT_SOURCES)
+ $(COMPILE) -DALL_TERM_DOC -c $(srcdir)/checkdoc.c
+
+# install section
+install: install-gih install-info
+
+install-gih: gnuplot.gih
+ $(top_srcdir)/mkinstalldirs $(DESTDIR)$(GIHDIR)
+ $(INSTALL_DATA) gnuplot.gih $(DESTDIR)$(GIHDIR)/gnuplot.gih
+
+install-info: gnuplot.info
+ $(top_srcdir)/mkinstalldirs $(DESTDIR)$(infodir)
+ $(INSTALL_DATA) gnuplot.info $(DESTDIR)$(infodir)/gnuplot.info
+ @if (install-info --version && \
+ install-info --version | fgrep -i -v debian) >/dev/null 2>&1; then \
+ echo "install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/gnuplot.info";\
+ install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/gnuplot.info || :;\
+ else : ; fi
+
+installcheck:
+
+install-exec:
+
+# uninstall section
+uninstall: uninstall-gih uninstall-info
+
+uninstall-gih:
+ rm -f $(DESTDIR)$(GIHDIR)/gnuplot.gih
+
+uninstall-info:
+ $(PRE_UNINSTALL)
+ @if (install-info --version && \
+ install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
+ list='$(INFO_DEPS)'; \
+ for file in $$list; do \
+ relfile=`echo "$$file" | sed 's|^.*/||'`; \
+ echo " install-info --info-dir=$(DESTDIR)$(infodir) --remove $(DESTDIR)$(infodir)/$$relfile"; \
+ install-info --info-dir=$(DESTDIR)$(infodir) --remove $(DESTDIR)$(infodir)/$$relfile; \
+ done; \
+ else :; fi
+ @$(NORMAL_UNINSTALL)
+ @list='$(INFO_DEPS)'; \
+ for file in $$list; do \
+ relfile=`echo "$$file" | sed 's|^.*/||'`; \
+ relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
+ (if cd $(DESTDIR)$(infodir); then \
+ echo " rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9])"; \
+ rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
+ else :; fi); \
+ done
+
+# for VMS only
+install-vms: gnuplot.hlp
+ $(INSTALL_DATA) gnuplot.hlp $(datadir)/gnuplot.hlp
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+
+subdir = docs
+
+
+distdir: $(DISTFILES)
+ distdir=`cd $(distdir) && pwd`
+ @for file in $(DISTFILES); do \
+ d=$(srcdir); \
+ if test -d $$d/$$file; then \
+ cp -pr $$d/$$file $(distdir)/$$file; \
+ else \
+ test -f $(distdir)/$$file \
+ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+ || cp -p $$d/$$file $(distdir)/$$file || :; \
+ fi; \
+ done
+
+clean-local:
+ @test "$(top_srcdir)" = "$(top_builddir)" || rm -f gnuplot.texi
+
+clean-generic:
+ -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+ -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
+ -test -d htmldocs && rm -rf htmldocs
+
+clean-compile:
+ rm -f *.o core *.core
+
+clean: clean-local clean-generic clean-compile
+ -rm -f *.exe *~
+
+mostlyclean: clean
+
+distclean: clean
+ -rm -f Makefile
+
+realclean: distclean
+ -rm -f TAGS
+
+Makefile: Makefile.in ../config.status
+ cd .. \
+ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+### Dependencies - do not edit!
+
+# all doc2somethings depend on termdoc and either ../term.h or
+# allterm.h, maybe this would be better as separate object file
+# (but then we have to change all the other makefiles). Plus then
+# we cannot make some doc2* filters use allterm.h and others use term.h
+
+checkdoc.o: checkdoc.c ../config.h $(top_srcdir)/src/syscfg.h \
+ $(top_srcdir)/src/stdfn.h doc2x.h allterm.h
+alldoc2gih.o: doc2gih.c ../config.h $(top_srcdir)/src/syscfg.h \
+ $(top_srcdir)/src/stdfn.h doc2x.h allterm.h
+doc2gih.o: doc2gih.c ../config.h $(top_srcdir)/src/syscfg.h \
+ $(top_srcdir)/src/stdfn.h doc2x.h $(TERM_H)
+doc2hlp.o: doc2hlp.c ../config.h $(top_srcdir)/src/syscfg.h \
+ $(top_srcdir)/src/stdfn.h doc2x.h $(TERM_H)
+doc2ipf.o: doc2ipf.c ../config.h $(top_srcdir)/src/syscfg.h \
+ $(top_srcdir)/src/stdfn.h doc2x.h $(TERM_H)
+doc2ms.o: doc2ms.c ../config.h $(top_srcdir)/src/syscfg.h \
+ $(top_srcdir)/src/stdfn.h doc2x.h allterm.h
+doc2rnh.o: doc2rnh.c ../config.h $(top_srcdir)/src/syscfg.h \
+ $(top_srcdir)/src/stdfn.h doc2x.h $(TERM_H)
+doc2rtf.o: doc2rtf.c ../config.h $(top_srcdir)/src/syscfg.h \
+ $(top_srcdir)/src/stdfn.h doc2x.h $(TERM_H)
+doc2tex.o: doc2tex.c ../config.h $(top_srcdir)/src/syscfg.h \
+ $(top_srcdir)/src/stdfn.h doc2x.h allterm.h
+termdoc.o: termdoc.c ../config.h $(top_srcdir)/src/syscfg.h \
+ $(top_srcdir)/src/stdfn.h doc2x.h
+xref.o: xref.c ../config.h $(top_srcdir)/src/syscfg.h \
+ $(top_srcdir)/src/stdfn.h doc2x.h xref.h
+
+#the end