--- /dev/null
+/* Hello, Emacs, this is -*-C-*-
+ * $Id: dxy.trm,v 1.14 2006/07/21 02:35:45 sfeam Exp $
+ *
+ */
+
+/* GNUPLOT - dxy.trm */
+
+/*[
+ * Copyright 1990 - 1993, 1998, 2004
+ *
+ * Permission to use, copy, and distribute this software and its
+ * documentation for any purpose with or without fee is hereby granted,
+ * provided that the above copyright notice appear in all copies and
+ * that both that copyright notice and this permission notice appear
+ * in supporting documentation.
+ *
+ * Permission to modify the software is granted, but not the right to
+ * distribute the complete modified source code. Modifications are to
+ * be distributed as patches to the released version. Permission to
+ * distribute binaries produced by compiling modified sources is granted,
+ * provided you
+ * 1. distribute the corresponding source modifications from the
+ * released version in the form of a patch file along with the binaries,
+ * 2. add special version identification to distinguish your version
+ * in addition to the base release version number,
+ * 3. provide your name and address as the primary contact for the
+ * support of your modified version, and
+ * 4. retain our contact information in regard to use of the base
+ * software.
+ * Permission to distribute the released version of the source code along
+ * with corresponding source modifications in the form of a patch file is
+ * granted with same provisions 2 through 4 for binary distributions.
+ *
+ * This software is provided "as is" without express or implied warranty
+ * to the extent permitted by applicable law.
+]*/
+
+/*
+ * This file is included by ../term.c.
+ *
+ * This terminal driver supports:
+ * Roland DXY800A plotter
+ *
+ * AUTHORS
+ * Martin Yii, eln557h@monu3.OZ
+ * Further modified Jan 1990 by Russell Lang, rjl@monu1.cc.monash.oz
+ *
+ * send your comments or suggestions to (gnuplot-info@lists.sourceforge.net).
+ *
+ */
+
+/*
+ * adapted to the new terminal layout by Stefan Bodewig (Dec. 1995)
+ */
+
+#include "driver.h"
+
+#ifdef TERM_REGISTER
+register_term(dxy800a)
+#endif
+
+#ifdef TERM_PROTO
+TERM_PUBLIC void DXY_init __PROTO((void));
+TERM_PUBLIC void DXY_graphics __PROTO((void));
+TERM_PUBLIC void DXY_text __PROTO((void));
+TERM_PUBLIC void DXY_linetype __PROTO((int linetype));
+TERM_PUBLIC void DXY_move __PROTO((unsigned int x, unsigned int y));
+TERM_PUBLIC void DXY_vector __PROTO((unsigned int x, unsigned int y));
+TERM_PUBLIC void DXY_put_text __PROTO((unsigned int x, unsigned int y, const char *str));
+TERM_PUBLIC int DXY_text_angle __PROTO((int ang));
+TERM_PUBLIC void DXY_reset __PROTO((void));
+
+#define DXY_XMAX 2470
+#define DXY_YMAX 1700
+
+#define DXY_XLAST (DXY_XMAX - 1)
+#define DXY_YLAST (DXY_XMAX - 1)
+
+#define DXY_VCHAR (56) /* double actual height of characters */
+#define DXY_HCHAR (28) /* actual width including spacing */
+#define DXY_VTIC (28)
+#define DXY_HTIC (28)
+#endif /* TERM_PROTO */
+
+#ifndef TERM_PROTO_ONLY
+#ifdef TERM_BODY
+
+int dxy_angle = 0;
+
+TERM_PUBLIC void
+DXY_init()
+{
+ /* No initialisation sequences for DXY 800A */
+}
+
+
+TERM_PUBLIC void
+DXY_graphics()
+{
+ /* HOME, Character size 3 */
+ fputs("H\nS3\n", gpoutfile);
+}
+
+
+TERM_PUBLIC void
+DXY_text()
+{
+ /* No sequences needed */
+}
+
+
+TERM_PUBLIC void
+DXY_linetype(int linetype)
+{
+ /* select pen */
+ fprintf(gpoutfile, "J%d\n", (linetype + 2) % 8 + 1);
+ switch (linetype) {
+ case LT_AXIS:
+ /* use dotted line for axis */
+ fputs("L1\nB50\n", gpoutfile);
+ break;
+ default:
+ /* use solid line for all others */
+ fputs("L0\n", gpoutfile);
+ break;
+ }
+}
+
+
+TERM_PUBLIC void
+DXY_move(unsigned int x, unsigned int y)
+{
+ fprintf(gpoutfile, "M%d,%d\n", x, y);
+}
+
+
+TERM_PUBLIC void
+DXY_vector(unsigned int x, unsigned int y)
+{
+ fprintf(gpoutfile, "D%d,%d\n", x, y);
+}
+
+
+TERM_PUBLIC void
+DXY_put_text(unsigned int x, unsigned int y, const char *str)
+{
+ if (dxy_angle == 1) {
+ /* vertical */
+ DXY_move(x + DXY_VCHAR / 4, y);
+ } else {
+ /* horiz */
+ DXY_move(x, y - DXY_VCHAR / 4);
+ }
+ fprintf(gpoutfile, "P%s\n", str);
+}
+
+
+TERM_PUBLIC int
+DXY_text_angle(int ang)
+{
+ dxy_angle = (ang ? 1 : 0);
+ fprintf(gpoutfile, "Q%d\n", ang);
+ return TRUE;
+}
+
+
+TERM_PUBLIC void
+DXY_reset()
+{
+ /* Home pen */
+ fputs("H\n", gpoutfile);
+}
+
+#endif /* TERM_BODY */
+
+#ifdef TERM_TABLE
+TERM_TABLE_START(dxy_driver)
+ "dxy800a", "Roland DXY800A plotter",
+ DXY_XMAX, DXY_YMAX, DXY_VCHAR, DXY_HCHAR,
+ DXY_VTIC, DXY_HTIC, options_null, DXY_init, DXY_reset,
+ DXY_text, null_scale, DXY_graphics, DXY_move, DXY_vector,
+ DXY_linetype, DXY_put_text, DXY_text_angle,
+ null_justify_text, do_point, do_arrow, set_font_null
+TERM_TABLE_END(dxy_driver)
+
+#undef LAST_TERM
+#define LAST_TERM dxy_driver
+
+#endif /* TERM_TABLE */
+#endif /* TERM_PROTO_ONLY */
+
+#ifdef TERM_HELP
+START_HELP(dxy800a)
+"1 dxy800a",
+"?commands set terminal dxy800a",
+"?set terminal dxy800a",
+"?set term dxy800a",
+"?terminal dxy800a",
+"?term dxy800a",
+"?dxy800a",
+" This terminal driver supports the Roland DXY800A plotter. It has no options."
+END_HELP(dxy800a)
+#endif
projects / gnuplot / blobdiff