--- /dev/null
+/*
+ * otg.c -- USB OTG utility code
+ *
+ * Copyright (C) 2004 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/mod_devicetable.h>
+#include <linux/byteorder/generic.h>
+#include <linux/gfp.h>
+#include <linux/usb.h>
+#include <linux/usb/otg.h>
+
+#include "../core/otg_whitelist.h"
+
+static struct otg_transceiver *xceiv;
+
+/**
+ * otg_get_transceiver - find the (single) OTG transceiver
+ *
+ * Returns the transceiver driver, after getting a refcount to it; or
+ * null if there is no such transceiver. The caller is responsible for
+ * calling otg_put_transceiver() to release that count.
+ *
+ * For use by USB host and peripheral drivers.
+ */
+struct otg_transceiver *otg_get_transceiver(void)
+{
+ if (xceiv)
+ get_device(xceiv->dev);
+ return xceiv;
+}
+EXPORT_SYMBOL(otg_get_transceiver);
+
+/**
+ * otg_put_transceiver - release the (single) OTG transceiver
+ * @x: the transceiver returned by otg_get_transceiver()
+ *
+ * Releases a refcount the caller received from otg_get_transceiver().
+ *
+ * For use by USB host and peripheral drivers.
+ */
+void otg_put_transceiver(struct otg_transceiver *x)
+{
+ put_device(x->dev);
+}
+EXPORT_SYMBOL(otg_put_transceiver);
+
+/**
+ * otg_set_transceiver - declare the (single) OTG transceiver
+ * @x: the USB OTG transceiver to be used; or NULL
+ *
+ * This call is exclusively for use by transceiver drivers, which
+ * coordinate the activities of drivers for host and peripheral
+ * controllers, and in some cases for VBUS current regulation.
+ */
+int otg_set_transceiver(struct otg_transceiver *x)
+{
+ if (xceiv && x)
+ return -EBUSY;
+ xceiv = x;
+ return 0;
+}
+EXPORT_SYMBOL(otg_set_transceiver);
+
+#ifdef CONFIG_USB_OTG_WHITELIST
+
+/*
+ * This OTG Whitelist is the OTG "Targeted Peripheral List". It should
+ * mostly use of USB_DEVICE() or USB_DEVICE_VER() entries..
+ *
+ * YOU _SHOULD_ CHANGE THIS LIST TO MATCH YOUR PRODUCT AND ITS TESTING!
+ */
+
+static struct usb_device_id whitelist_table[] = {
+
+/* hubs are optional in OTG, but very handy ... */
+{ USB_DEVICE_INFO(USB_CLASS_HUB, 0, 0), },
+{ USB_DEVICE_INFO(USB_CLASS_HUB, 0, 1), },
+
+#ifdef CONFIG_USB_PRINTER /* ignoring nonstatic linkage! */
+/* FIXME actually, printers are NOT supposed to use device classes;
+ * they're supposed to use interface classes...
+ */
+{ USB_DEVICE_INFO(7, 1, 1) },
+{ USB_DEVICE_INFO(7, 1, 2) },
+{ USB_DEVICE_INFO(7, 1, 3) },
+#endif
+
+#ifdef CONFIG_USB_NET_CDCETHER
+/* Linux-USB CDC Ethernet gadget */
+{ USB_DEVICE(0x0525, 0xa4a1), },
+/* Linux-USB CDC Ethernet + RNDIS gadget */
+{ USB_DEVICE(0x0525, 0xa4a2), },
+#endif
+
+#if defined(CONFIG_USB_TEST) || defined(CONFIG_USB_TEST_MODULE)
+/* gadget zero, for testing */
+{ USB_DEVICE(0x0525, 0xa4a0), },
+#endif
+
+{ } /* Terminating entry */
+};
+
+int is_targeted(struct usb_device *dev)
+{
+ struct usb_device_id *id = whitelist_table;
+
+ /* possible in developer configs only! */
+ if (!dev->bus->otg_port)
+ return 1;
+
+ /* HNP test device is _never_ targeted (see OTG spec 6.6.6) */
+ if ((le16_to_cpu(dev->descriptor.idVendor) == 0x1a0a &&
+ le16_to_cpu(dev->descriptor.idProduct) == 0xbadd))
+ return 0;
+
+ /* NOTE: can't use usb_match_id() since interface caches
+ * aren't set up yet. this is cut/paste from that code.
+ */
+ for (id = whitelist_table; id->match_flags; id++) {
+ if ((id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) &&
+ id->idVendor != le16_to_cpu(dev->descriptor.idVendor))
+ continue;
+
+ if ((id->match_flags & USB_DEVICE_ID_MATCH_PRODUCT) &&
+ id->idProduct != le16_to_cpu(dev->descriptor.idProduct))
+ continue;
+
+ /* No need to test id->bcdDevice_lo != 0, since 0 is never
+ greater than any unsigned number. */
+ if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_LO) &&
+ (id->bcdDevice_lo > le16_to_cpu(dev->descriptor.bcdDevice)))
+ continue;
+
+ if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_HI) &&
+ (id->bcdDevice_hi < le16_to_cpu(dev->descriptor.bcdDevice)))
+ continue;
+
+ if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_CLASS) &&
+ (id->bDeviceClass != dev->descriptor.bDeviceClass))
+ continue;
+
+ if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_SUBCLASS) &&
+ (id->bDeviceSubClass != dev->descriptor.bDeviceSubClass))
+ continue;
+
+ if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_PROTOCOL) &&
+ (id->bDeviceProtocol != dev->descriptor.bDeviceProtocol))
+ continue;
+
+ return 1;
+ }
+
+ /* add other match criteria here ... */
+
+
+ /* OTG MESSAGE: report errors here, customize to match your product */
+ dev_err(&dev->dev, "device v%04x p%04x is not supported\n",
+ le16_to_cpu(dev->descriptor.idVendor),
+ le16_to_cpu(dev->descriptor.idProduct));
+
+ return 0;
+}
+
+#endif /* CONFIG_USB_OTG_WHITELIST */