--- /dev/null
+# Makefile.in generated by automake 1.11 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+target_triplet = @target@
+subdir = interfaces/swig/octave
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in COPYING
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = \
+ $(top_srcdir)/autotools/aclocal/ax_check_compiler_flags.m4 \
+ $(top_srcdir)/autotools/aclocal/ax_ext.m4 \
+ $(top_srcdir)/autotools/aclocal/ax_gcc_x86_cpuid.m4 \
+ $(top_srcdir)/autotools/aclocal/az_python.m4 \
+ $(top_srcdir)/autotools/aclocal/libtool.m4 \
+ $(top_srcdir)/autotools/aclocal/ltoptions.m4 \
+ $(top_srcdir)/autotools/aclocal/ltsugar.m4 \
+ $(top_srcdir)/autotools/aclocal/ltversion.m4 \
+ $(top_srcdir)/autotools/aclocal/lt~obsolete.m4 \
+ $(top_srcdir)/autotools/aclocal/pkg.m4 \
+ $(top_srcdir)/autotools/aclocal/swig_complete.m4 \
+ $(top_srcdir)/autotools/aclocal/version_at_least.m4 \
+ $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(SHELL) $(top_srcdir)/autotools/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/cvconfig.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+SOURCES =
+DIST_SOURCES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__installdirs = "$(DESTDIR)$(octavedir)"
+DATA = $(nodist_octave_DATA)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ALLOCA = @ALLOCA@
+AMTAR = @AMTAR@
+AR = @AR@
+AS = @AS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CARBON_CFLAGS = @CARBON_CFLAGS@
+CARBON_LIBS = @CARBON_LIBS@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEBUG = @DEBUG@
+DEBUG_CPPFLAGS = @DEBUG_CPPFLAGS@
+DEBUG_CXXFLAGS = @DEBUG_CXXFLAGS@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FFMPEGLIBS = @FFMPEGLIBS@
+FGREP = @FGREP@
+FLOAT_STORE_CFLAGS = @FLOAT_STORE_CFLAGS@
+GREP = @GREP@
+GSTREAMER_CFLAGS = @GSTREAMER_CFLAGS@
+GSTREAMER_LIBS = @GSTREAMER_LIBS@
+GTHREAD_CFLAGS = @GTHREAD_CFLAGS@
+GTHREAD_LIBS = @GTHREAD_LIBS@
+GTK_CFLAGS = @GTK_CFLAGS@
+GTK_LIBS = @GTK_LIBS@
+IEEE1394LIBS = @IEEE1394LIBS@
+IMAGELIBS = @IMAGELIBS@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LAPACK_LIBS = @LAPACK_LIBS@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+LT_VERSION = @LT_VERSION@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+MKOCTFILE = @MKOCTFILE@
+MMAJOR = @MMAJOR@
+MMINOR = @MMINOR@
+MSUBMINOR = @MSUBMINOR@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OCTAVE = @OCTAVE@
+OCTAVE_ARCH = @OCTAVE_ARCH@
+OCTAVE_INCFLAGS = @OCTAVE_INCFLAGS@
+OPENMP_CXXFLAGS = @OPENMP_CXXFLAGS@
+OPTIMIZATION_CPPFLAGS = @OPTIMIZATION_CPPFLAGS@
+OPTIMIZATION_CXXFLAGS = @OPTIMIZATION_CXXFLAGS@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+PYTHON = @PYTHON@
+PYTHON_CSPEC = @PYTHON_CSPEC@
+PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
+PYTHON_LSPEC = @PYTHON_LSPEC@
+PYTHON_PLATFORM = @PYTHON_PLATFORM@
+PYTHON_PREFIX = @PYTHON_PREFIX@
+PYTHON_VERSION = @PYTHON_VERSION@
+QUICKTIME_CFLAGS = @QUICKTIME_CFLAGS@
+QUICKTIME_LIBS = @QUICKTIME_LIBS@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIMD_FLAGS = @SIMD_FLAGS@
+STRIP = @STRIP@
+SWIG = @SWIG@
+SWIG_OCTAVE_OPT = @SWIG_OCTAVE_OPT@
+SWIG_PYTHON_LIBS = @SWIG_PYTHON_LIBS@
+SWIG_PYTHON_OPT = @SWIG_PYTHON_OPT@
+SWIG_RUNTIME_LIBS_DIR = @SWIG_RUNTIME_LIBS_DIR@
+SWIG_VERSION = @SWIG_VERSION@
+UCIL_PACKAGE_CFLAGS = @UCIL_PACKAGE_CFLAGS@
+UCIL_PACKAGE_LIBS = @UCIL_PACKAGE_LIBS@
+UNICAP_PACKAGE_CFLAGS = @UNICAP_PACKAGE_CFLAGS@
+UNICAP_PACKAGE_LIBS = @UNICAP_PACKAGE_LIBS@
+VERSION = @VERSION@
+XINE_LIBS = @XINE_LIBS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+pkgpyexecdir = @pkgpyexecdir@
+pkgpythondir = @pkgpythondir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+pyexecdir = @pyexecdir@
+pythondir = @pythondir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target = @target@
+target_alias = @target_alias@
+target_cpu = @target_cpu@
+target_os = @target_os@
+target_vendor = @target_vendor@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+CV_INCLUDES = -I$(top_srcdir)/include/opencv -I$(srcdir)
+AM_CPPFLAGS = \
+ $(CV_INCLUDES) \
+ -DCV_NO_BACKWARD_COMPATIBILITY
+
+AM_CXXFLAGS = @OCT_CXXFLAGS@
+EXTRA_DIST = \
+ \
+ CMakeLists.txt \
+ \
+ DESCRIPTION \
+ INDEX \
+ PKG_ADD_template \
+ COPYING \
+ \
+ opencv.m \
+ \
+ adapters.i \
+ cvaliases.i \
+ cvarr.i \
+ cv.i \
+ cvseq.i \
+ cvshadow.i \
+ highgui.i \
+ imagedata.i \
+ ml.i \
+ octhelpers.i \
+ octtypemaps.i \
+ \
+ cvshadow.h \
+ octerror.h \
+ octcvseq.hpp \
+ octhelpers.h \
+ \
+ cv_wrap.cpp \
+ ml_wrap.cpp \
+ highgui_wrap.cpp \
+ cvshadow.cpp \
+ octerror.cpp \
+ octhelpers.cpp
+
+
+# Conditional targets #######################################################
+@BUILD_OCTAVE_WRAPPERS_TRUE@OCTAVE_PKG_VERSION = 1.0 #$(shell egrep '^Version: ' $(top_srcdir)/interfaces/swig/octave/DESCRIPTION|sed -e 's/Version: //')
+@BUILD_OCTAVE_WRAPPERS_TRUE@PKG_NAME = opencv-1.1.0
+@BUILD_OCTAVE_WRAPPERS_TRUE@PKG_OCT_FILES = cv.oct ml.oct highgui.oct
+@BUILD_OCTAVE_WRAPPERS_TRUE@PKG_OTHER_FILES = $(srcdir)/COPYING $(srcdir)/DESCRIPTION $(srcdir)/INDEX $(srcdir)/PKG_ADD_template
+@BUILD_OCTAVE_WRAPPERS_TRUE@octavedir = $(pkgdatadir)/octave
+@BUILD_OCTAVE_WRAPPERS_TRUE@nodist_octave_DATA = opencv-1.1.0.tar.gz
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu interfaces/swig/octave/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --gnu interfaces/swig/octave/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+install-nodist_octaveDATA: $(nodist_octave_DATA)
+ @$(NORMAL_INSTALL)
+ test -z "$(octavedir)" || $(MKDIR_P) "$(DESTDIR)$(octavedir)"
+ @list='$(nodist_octave_DATA)'; test -n "$(octavedir)" || list=; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(octavedir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(octavedir)" || exit $$?; \
+ done
+
+uninstall-nodist_octaveDATA:
+ @$(NORMAL_UNINSTALL)
+ @list='$(nodist_octave_DATA)'; test -n "$(octavedir)" || list=; \
+ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+ test -n "$$files" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(octavedir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(octavedir)" && rm -f $$files
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(DATA)
+installdirs:
+ for dir in "$(DESTDIR)$(octavedir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool clean-local mostlyclean-am
+
+distclean: distclean-am
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-nodist_octaveDATA
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-nodist_octaveDATA
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+ clean-local distclean distclean-generic distclean-libtool \
+ distdir dvi dvi-am html html-am info info-am install \
+ install-am install-data install-data-am install-dvi \
+ install-dvi-am install-exec install-exec-am install-html \
+ install-html-am install-info install-info-am install-man \
+ install-nodist_octaveDATA install-pdf install-pdf-am \
+ install-ps install-ps-am install-strip installcheck \
+ installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-generic \
+ mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
+ uninstall-nodist_octaveDATA
+
+
+# SWIG #######################################################################
+
+# the following rules keep wrappers up to date, if SWIG is present
+
+# this rule creates the octave wrapper sources for cxcore and cv
+@UPDATE_SWIG_WRAPPERS_TRUE@cv_wrap.cpp: cv.i imagedata.i cvarr.i octhelpers.i \
+@UPDATE_SWIG_WRAPPERS_TRUE@ octtypemaps.i cvshadow.i cvseq.i \
+@UPDATE_SWIG_WRAPPERS_TRUE@ octerror.cpp octerror.h \
+@UPDATE_SWIG_WRAPPERS_TRUE@ octhelpers.h cvshadow.h octcvseq.hpp \
+@UPDATE_SWIG_WRAPPERS_TRUE@ $(top_srcdir)/interfaces/swig/general/cv.i \
+@UPDATE_SWIG_WRAPPERS_TRUE@ $(top_srcdir)/interfaces/swig/general/memory.i \
+@UPDATE_SWIG_WRAPPERS_TRUE@ $(top_srcdir)/interfaces/swig/general/typemaps.i \
+@UPDATE_SWIG_WRAPPERS_TRUE@ $(top_srcdir)/interfaces/swig/general/extensions.i \
+@UPDATE_SWIG_WRAPPERS_TRUE@ $(top_srcdir)/interfaces/swig/general/doublepointers.i \
+@UPDATE_SWIG_WRAPPERS_TRUE@ $(top_srcdir)/interfaces/swig/general/sizeof.i \
+@UPDATE_SWIG_WRAPPERS_TRUE@ $(top_srcdir)/interfaces/swig/general/cvmacros.i \
+@UPDATE_SWIG_WRAPPERS_TRUE@ ../filtered/cv.h \
+@UPDATE_SWIG_WRAPPERS_TRUE@ ../filtered/constants.h \
+@UPDATE_SWIG_WRAPPERS_TRUE@ Makefile.in
+@UPDATE_SWIG_WRAPPERS_TRUE@ $(SWIG) $(SWIG_OCTAVE_OPT) $(CV_INCLUDES) -o $@ $<
+
+# this rule creates the octave wrapper sources for ml
+@UPDATE_SWIG_WRAPPERS_TRUE@ml_wrap.cpp: ml.i octtypemaps.i \
+@UPDATE_SWIG_WRAPPERS_TRUE@ $(top_srcdir)/interfaces/swig/general/typemaps.i \
+@UPDATE_SWIG_WRAPPERS_TRUE@ $(top_srcdir)/interfaces/swig/general/memory.i \
+@UPDATE_SWIG_WRAPPERS_TRUE@ $(top_srcdir)/include/opencv/ml.h \
+@UPDATE_SWIG_WRAPPERS_TRUE@ Makefile.in
+@UPDATE_SWIG_WRAPPERS_TRUE@ $(SWIG) $(SWIG_OCTAVE_OPT) $(CV_INCLUDES) -DSKIP_INCLUDES -o $@ $<
+
+# this rule creates the octave wrapper sources for highgui
+@UPDATE_SWIG_WRAPPERS_TRUE@highgui_wrap.cpp: highgui.i octtypemaps.i adapters.i \
+@UPDATE_SWIG_WRAPPERS_TRUE@ $(top_srcdir)/interfaces/swig/general/highgui.i \
+@UPDATE_SWIG_WRAPPERS_TRUE@ $(top_srcdir)/interfaces/swig/general/typemaps.i \
+@UPDATE_SWIG_WRAPPERS_TRUE@ $(top_srcdir)/interfaces/swig/general/memory.i \
+@UPDATE_SWIG_WRAPPERS_TRUE@ $(top_srcdir)/include/opencv/highgui.h \
+@UPDATE_SWIG_WRAPPERS_TRUE@ Makefile.in
+@UPDATE_SWIG_WRAPPERS_TRUE@ $(SWIG) $(SWIG_OCTAVE_OPT) $(CV_INCLUDES) -DSKIP_INCLUDES -o $@ $<
+
+@BUILD_OCTAVE_WRAPPERS_TRUE@opencv-1.1.0.tar.gz: $(PKG_OCT_FILES) $(PKG_OTHER_FILES)
+@BUILD_OCTAVE_WRAPPERS_TRUE@ mkdir -p $(PKG_NAME)
+@BUILD_OCTAVE_WRAPPERS_TRUE@ mkdir -p $(PKG_NAME)/inst/$(OCTAVE_ARCH)
+@BUILD_OCTAVE_WRAPPERS_TRUE@ cp -rf $(PKG_OTHER_FILES) $(PKG_NAME)
+@BUILD_OCTAVE_WRAPPERS_TRUE@ mv $(PKG_NAME)/PKG_ADD_template $(PKG_NAME)/PKG_ADD
+@BUILD_OCTAVE_WRAPPERS_TRUE@ cp -rf $(PKG_OCT_FILES) $(PKG_NAME)/inst/$(OCTAVE_ARCH)
+@BUILD_OCTAVE_WRAPPERS_TRUE@ tar cpzvf $@ $(PKG_NAME)
+@BUILD_OCTAVE_WRAPPERS_TRUE@ rm -rf $(PKG_NAME)
+
+# seems that mkoctfile has some troubles compiling the wrapper... it takes forever
+# workaround is to use the g++ directly
+#MY_MKOCTFILE=$(CXX) -O0 -g -shared $(OCTAVE_INCFLAGS)
+
+@BUILD_OCTAVE_WRAPPERS_TRUE@cv.oct: cv_wrap.cpp cvshadow.cpp octerror.cpp octhelpers.cpp
+@BUILD_OCTAVE_WRAPPERS_TRUE@ $(MKOCTFILE) -o $@ $(AM_CPPFLAGS) $(OCTAVE_INCFLAGS) -L$(top_builddir)/src/.libs -lcv -lcxcore $^
+@BUILD_OCTAVE_WRAPPERS_TRUE@ml.oct: ml_wrap.cpp octhelpers.cpp
+@BUILD_OCTAVE_WRAPPERS_TRUE@ $(MKOCTFILE) -o $@ $(AM_CPPFLAGS) $(OCTAVE_INCFLAGS) -L$(top_builddir)/src/.libs -lml -lcxcore $^
+@BUILD_OCTAVE_WRAPPERS_TRUE@highgui.oct: highgui_wrap.cpp octhelpers.cpp
+@BUILD_OCTAVE_WRAPPERS_TRUE@ $(MKOCTFILE) -o $@ $(AM_CPPFLAGS) $(OCTAVE_INCFLAGS) -L$(top_builddir)/src/.libs -lhighgui -lcxcore $^
+
+clean-local:
+ rm -rf opencv-1.1.0.tar.gz *.oct
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
projects / opencv / blobdiff