--- /dev/null
+# Note that this file exists in Mandrake packaging cvs (as samba.spec)
+# and samba cvs (as packaging/Mandrake/samba2.spec.tmpl).
+# Keep in mind that any changes should take both locations into account
+# Considerable effort has gone into making this possible, so that only
+# one spec file is maintained, please don't break it.
+# It should be possible, without any changes to this file, to build
+# binary packages on most recent Mandrake releases:
+# 1)from official source releases, using 'cd packaging/Mandrake; sh makerpms.sh'
+# 2)from cvs snapshots, using 'cd packaging/Mandrake; sh makerpms-cvs.sh <ver>'
+# 3)using official source releases and updated Mandrake packaging, by
+# 'rpm -ba samba.spec'
+# As such, any sources or patches used in a build from a samba release or
+# cvs should be submitted for inclusion in samba cvs.
+
+%define pkg_name samba
+%define ver 3.0.8
+%define drel 1
+%define subrel 1
+%define vscanver 0.3.5
+%define libsmbmajor 0
+%{?!mdkversion: %define mdkversion %(perl -pe '/(\d+)\.(\d)\.?(\d)?/; $_="$1$2".($3||0)' /etc/mandrake-release)}
+%define rel %(case `hostname` in (n?.mandrakesoft.com) echo %drel;;(*) echo $[%drel-1].%subrel.$[%mdkversion/10];;esac)mdk
+%{?_with_stable_on_cluster: %define rel %(echo $[%{drel}-1].%subrel.$[%{mdkversion}/10]mdk)}
+%{?_with_official: %define rel %drel}
+
+%{!?lib: %global lib lib}
+%{!?mklibname: %global mklibname(ds) %lib%{1}%{?2:%{2}}%{?3:_%{3}}%{-s:-static}%{-d:-devel}}
+
+%define libname %mklibname smbclient %libsmbmajor
+
+# Version and release replaced by samba-team at release from samba cvs
+%define pversion 3.0.13
+%define prelease 1
+
+#Check to see if p(version|release) has been replaced (1 if replaced)
+%define have_pversion %(if [ "%pversion" = `echo "pversion" |tr '[:lower:]' '[:upper:]'` ];then echo 0; else echo 1; fi)
+%define have_prelease %(if [ "%prelease" = `echo "prelease" |tr '[:lower:]' '[:upper:]'` ];then echo 0; else echo 1; fi)
+
+%if %have_pversion
+%define source_ver %{pversion}
+# Don't abort for stupid reasons on builds from tarballs:
+%global _unpackaged_files_terminate_build 0
+%global _missing_doc_files_terminate_build 0
+%else
+%define source_ver %{ver}
+%endif
+
+# We might have a prerelease:
+%define have_pre %(echo %source_ver|awk '{p=0} /[a-z,A-Z][a-z,A-Z]/ {p=1} {print p}')
+%if %have_pre
+%define pre_ver %(perl -e '$name="%source_ver"; print ($name =~ /(.*?)[a-z]/);')
+%define pre_pre %(echo %source_ver|sed -e 's/%pre_ver//g')
+%endif
+
+# Check to see if we are running a build from a tarball release from samba.org
+# (%have_pversion) If so, disable vscan, unless explicitly requested
+# (--with vscan).
+%define build_vscan 1
+%if %have_pversion
+%define build_vscan 0
+%{?_with_vscan: %define build_vscan 1}
+%endif
+
+# We now do detection of the Mandrake release we are building on:
+%define build_mdk82 %(if [ `awk '{print $4}' /etc/mandrake-release` = 8.2 ];then echo 1; else echo 0; fi)
+%define build_mdk81 %(if [ `awk '{print $4}' /etc/mandrake-release` = 8.1 ];then echo 1; else echo 0; fi)
+%define build_mdk80 %(if [ `awk '{print $4}' /etc/mandrake-release` = 8.0 ];then echo 1; else echo 0; fi)
+%define build_mdk72 %(if [ `awk '{print $4}' /etc/mandrake-release` = 7.2 ];then echo 1; else echo 0; fi)
+%define build_non_default 0
+
+# Default options
+%define build_alternatives 0
+%define build_system 0
+%define build_acl 1
+%define build_winbind 1
+%define build_wins 1
+%define build_ldap 0
+%define build_ads 1
+%define build_scanners 0
+# CUPS supports functionality for 'printcap name = cups' (9.0 and later):
+%define build_cupspc 0
+# %_{pre,postun}_service are provided by rpm-helper in 9.0 and later
+%define have_rpmhelper 1
+
+# Set defaults for each version
+%if %mdkversion >= 1000
+%define build_system 1
+%endif
+
+%if %mdkversion >= 920
+%define build_alternatives 1
+%endif
+
+%if %mdkversion >= 910
+%define build_cupspc 1
+%endif
+
+%if %build_mdk82
+%define have_rpmhelper 0
+%endif
+
+%if %build_mdk81
+%define build_winbind 0
+%define build_wins 0
+%define have_rpmhelper 0
+%endif
+
+%if %build_mdk80
+%define build_acl 0
+%define build_winbind 0
+%define build_wins 0
+%define build_ads 0
+%define have_rpmhelper 1
+%endif
+
+%if %build_mdk72
+%define build_acl 0
+%define build_winbind 0
+%define build_wins 0
+%define build_ads 0
+%define have_rpmhelper 1
+%endif
+
+
+# Allow commandline option overrides (borrowed from Vince's qmail srpm):
+# To use it, do rpm [-ba|--rebuild] --with 'xxx'
+# Check if the rpm was built with the defaults, otherwise we inform the user
+%define build_non_default 0
+%{?_with_system: %global build_system 1}
+%{?_without_system: %global build_system 0}
+%{?_with_acl: %global build_acl 1}
+%{?_with_acl: %global build_non_default 1}
+%{?_without_acl: %global build_acl 0}
+%{?_without_acl: %global build_non_default 1}
+%{?_with_winbind: %global build_winbind 1}
+%{?_with_winbind: %global build_non_default 1}
+%{?_without_winbind: %global build_winbind 0}
+%{?_without_winbind: %global build_non_default 1}
+%{?_with_wins: %global build_wins 1}
+%{?_with_wins: %global build_non_default 1}
+%{?_without_wins: %global build_wins 0}
+%{?_without_wins: %global build_non_default 1}
+%{?_with_ldap: %global build_ldap 1}
+%{?_with_ldap: %global build_non_default 1}
+%{?_without_ldap: %global build_ldap 0}
+%{?_without_ldap: %global build_non_default 1}
+%{?_with_ads: %global build_ads 1}
+%{?_with_ads: %global build_non_default 1}
+%{?_without_ads: %global build_ads 0}
+%{?_without_ads: %global build_non_default 1}
+%{?_with_scanners: %global build_scanners 1}
+%{?_with_scanners: %global build_non_default 1}
+%{?_without_scanners: %global build_scanners 0}
+%{?_without_scanners: %global build_non_default 1}
+%{?_with_vscan: %global build_vscan 1}
+%{?_with_vscan: %global build_non_default 1}
+%{?_without_vscan: %global build_vscan 0}
+%{?_without_vscan: %global build_non_default 1}
+
+# As if that weren't enough, we're going to try building with antivirus
+# support as an option also
+%global build_clamav 0
+%global build_fprot 0
+%global build_fsav 0
+%global build_icap 0
+%global build_kaspersky 0
+%global build_mks 0
+%global build_nai 0
+%global build_openav 0
+%global build_sophos 0
+%global build_symantec 0
+%global build_trend 0
+%if %build_vscan
+# These we build by default
+%global build_clamav 1
+%global build_icap 1
+%endif
+%if %build_vscan && %build_scanners
+# These scanners are built if scanners are selected
+# symantec requires their library present and must be selected
+# individually
+%global build_fprot 1
+%global build_fsav 1
+%global build_kaspersky 1
+%global build_mks 1
+%global build_nai 1
+%global build_openav 1
+%global build_sophos 1
+%global build_trend 1
+%endif
+%if %build_vscan
+%{?_with_fprot: %{expand: %%global build_fprot 1}}
+%{?_with_kaspersky: %{expand: %%global build_kaspersky 1}}
+%{?_with_mks: %{expand: %%global build_mks 1}}
+%{?_with_openav: %{expand: %%global build_openav 1}}
+%{?_with_sophos: %{expand: %%global build_sophos 1}}
+#%{?_with_symantec: %{expand: %%global build_symantec 1}}
+%{?_with_trend: %{expand: %%global build_trend 1}}
+%global vscandir samba-vscan-%{vscanver}
+%endif
+%global vfsdir examples.bin/VFS
+
+#Standard texts for descriptions:
+%define message_bugzilla() %(echo -e -n "Please file bug reports for this package at Mandrake bugzilla \\n(http://qa.mandrakesoft.com) under the product name %{1}")
+%define message_system %(echo -e -n "NOTE: These packages of samba-%{version}, are provided, parallel installable\\nwith samba-2.2.x, to allow easy migration from samba-2.2.x to samba-%{version},\\nbut are not officially supported")
+
+#check gcc version to disable some optimisations on gcc-3.3.1
+%define gcc331 %(gcc -dumpversion|awk '{if ($1>3.3) print 1; else print 0}')
+
+#Define sets of binaries that we can use in globs and loops:
+%global commonbin net,ntlm_auth,rpcclient,smbcacls,smbcquotas,smbpasswd,smbtree,testparm,testprns
+
+%global serverbin editreg,pdbedit,profiles,smbcontrol,smbstatus,tdbbackup,tdbdump
+%global serversbin nmbd,samba,smbd,mkntpwd
+
+%global clientbin findsmb,nmblookup,smbclient,smbmnt,smbmount,smbprint,smbspool,smbtar,smbumount,smbget
+%global client_bin mount.cifs
+%global client_sbin mount.smb,mount.smbfs
+
+%global testbin debug2html,smbtorture,msgtest,masktest,locktest,locktest2,nsstest,vfstest
+
+%ifarch alpha
+%define build_expsam xml
+%else
+%define build_expsam mysql,xml,pgsql
+%endif
+
+#Workaround missing macros in 8.x:
+%{!?perl_vendorlib: %{expand: %%global perl_vendorlib %{perl_sitearch}/../}}
+
+# Determine whether this is the system samba or not.
+%if %build_system
+%define samba_major %{nil}
+%else
+%define samba_major 3
+%endif
+# alternatives_major is %{nil} if we aren't system and not using alternatives
+%if !%build_system || %build_alternatives
+%define alternative_major 3
+%else
+%define alternative_major %{nil}
+%endif
+
+Summary: Samba SMB server.
+Name: %{pkg_name}%{samba_major}
+
+%if %have_pre
+Version: %{pre_ver}
+%else
+Version: %{source_ver}
+%endif
+
+%if %have_prelease && !%have_pre
+Release: 0.%{prelease}.%{rel}
+%endif
+%if %have_prelease && %have_pre
+Release: 0.%{pre_pre}.%{rel}
+%endif
+%if !%have_prelease && !%have_pre
+Release: %{rel}
+%endif
+%if !%have_prelease && %have_pre
+Release: 0.%{pre_pre}.%{rel}
+%endif
+
+License: GPL
+Group: System/Servers
+Source: ftp://samba.org/pub/samba/samba-%{source_ver}.tar.bz2
+URL: http://www.samba.org
+Source1: samba.log
+Source3: samba.xinetd
+Source4: swat_48.png.bz2
+Source5: swat_32.png.bz2
+Source6: swat_16.png.bz2
+Source7: README.%{name}-mandrake-rpm
+%if %build_vscan
+Source8: samba-vscan-%{vscanver}.tar.bz2
+%endif
+%if %build_vscan && %mdkversion >= 920
+BuildRequires: file-devel
+%endif
+Source10: samba-print-pdf.sh.bz2
+Source11: smb-migrate.bz2
+Patch1: smbw.patch.bz2
+Patch4: samba-3.0-smbmount-sbin.patch.bz2
+Patch5: samba-3.0.2a-smbldap-config.patch.bz2
+%if !%have_pversion
+# Version specific patches: current version
+Patch7: samba-3.0.5-lib64.patch.bz2
+Patch9: samba-3.0.6-smbmount-unixext.patch.bz2
+Patch11: samba-3.0.7-mandrake-packaging.patch.bz2
+%else
+# Version specific patches: upcoming version
+Patch8: samba-3.0.6-revert-libsmbclient-move.patch.bz2
+%endif
+# Limbo patches (applied to prereleases, but not preleases, ie destined for
+# samba CVS)
+%if %have_pversion && %have_pre
+%endif
+Requires: pam >= 0.64, samba-common = %{version}
+BuildRequires: pam-devel readline-devel libncurses-devel popt-devel
+BuildRequires: libxml2-devel postgresql-devel
+%ifnarch alpha
+BuildRequires: mysql-devel
+%endif
+%if %build_acl
+BuildRequires: libacl-devel
+%endif
+%if %build_mdk72
+BuildRequires: cups-devel
+%else
+BuildRequires: libcups-devel
+%endif
+BuildRequires: libldap-devel
+%if %build_ads
+BuildRequires: libldap-devel krb5-devel
+%endif
+BuildRoot: %{_tmppath}/%{name}-%{version}-root
+Prefix: /usr
+Prereq: /sbin/chkconfig /bin/mktemp /usr/bin/killall
+Prereq: fileutils sed /bin/grep
+
+%description
+Samba provides an SMB server which can be used to provide
+network services to SMB (sometimes called "Lan Manager")
+clients, including various versions of MS Windows, OS/2,
+and other Linux machines. Samba also provides some SMB
+clients, which complement the built-in SMB filesystem
+in Linux. Samba uses NetBIOS over TCP/IP (NetBT) protocols
+and does NOT need NetBEUI (Microsoft Raw NetBIOS frame)
+protocol.
+
+Samba-3.0 features working NT Domain Control capability and
+includes the SWAT (Samba Web Administration Tool) that
+allows samba's smb.conf file to be remotely managed using your
+favourite web browser. For the time being this is being
+enabled on TCP port 901 via xinetd. SWAT is now included in
+it's own subpackage, samba-swat.
+
+Please refer to the WHATSNEW.txt document for fixup information.
+This binary release includes encrypted password support.
+
+Please read the smb.conf file and ENCRYPTION.txt in the
+docs directory for implementation details.
+%if %have_pversion
+%message_bugzilla samba3
+%endif
+%if !%build_system
+%message_system
+%endif
+%if %build_non_default
+WARNING: This RPM was built with command-line options. Please
+see README.%{name}-mandrake-rpm in the documentation for
+more information.
+%endif
+
+%package server
+URL: http://www.samba.org
+Summary: Samba (SMB) server programs.
+Requires: %{name}-common = %{version}
+%if %have_rpmhelper
+PreReq: rpm-helper
+%endif
+Group: Networking/Other
+%if %build_system
+Provides: samba
+Obsoletes: samba
+Provides: samba-server-ldap
+Obsoletes: samba-server-ldap
+Provides: samba3-server
+Obsoletes: samba3-server
+%else
+#Provides: samba-server
+%endif
+
+%description server
+Samba-server provides a SMB server which can be used to provide
+network services to SMB (sometimes called "Lan Manager")
+clients. Samba uses NetBIOS over TCP/IP (NetBT) protocols
+and does NOT need NetBEUI (Microsoft Raw NetBIOS frame)
+protocol.
+
+Samba-3.0 features working NT Domain Control capability and
+includes the SWAT (Samba Web Administration Tool) that
+allows samba's smb.conf file to be remotely managed using your
+favourite web browser. For the time being this is being
+enabled on TCP port 901 via xinetd. SWAT is now included in
+it's own subpackage, samba-swat.
+
+Please refer to the WHATSNEW.txt document for fixup information.
+This binary release includes encrypted password support.
+
+Please read the smb.conf file and ENCRYPTION.txt in the
+docs directory for implementation details.
+%if %have_pversion
+%message_bugzilla samba3-server
+%endif
+%if !%build_system
+%message_system
+%endif
+
+%package client
+URL: http://www.samba.org
+Summary: Samba (SMB) client programs.
+Group: Networking/Other
+Requires: %{name}-common = %{version}
+%if %build_alternatives
+#Conflicts: samba-client < 2.2.8a-9mdk
+%endif
+%if %build_system
+Provides: samba3-client
+Obsoletes: samba3-client
+Obsoletes: smbfs
+%else
+#Provides: samba-client
+%endif
+%if !%build_system && %build_alternatives
+Provides: samba-client
+%endif
+
+%description client
+Samba-client provides some SMB clients, which complement the built-in
+SMB filesystem in Linux. These allow the accessing of SMB shares, and
+printing to SMB printers.
+%if %have_pversion
+%message_bugzilla samba3-client
+%endif
+%if !%build_system
+%message_system
+%endif
+
+%package common
+URL: http://www.samba.org
+Summary: Files used by both Samba servers and clients.
+Group: System/Servers
+%if %build_system
+Provides: samba-common-ldap
+Obsoletes: samba-common-ldap
+Provides: samba3-common
+Obsoletes: samba3-common
+%else
+#Provides: samba-common
+%endif
+
+%description common
+Samba-common provides files necessary for both the server and client
+packages of Samba.
+%if %have_pversion
+%message_bugzilla samba3-common
+%endif
+%if !%build_system
+%message_system
+%endif
+
+%package doc
+URL: http://www.samba.org
+Summary: Documentation for Samba servers and clients.
+Group: System/Servers
+Requires: %{name}-common = %{version}
+%if %build_system
+Obsoletes: samba3-doc
+Provides: samba3-doc
+%else
+#Provides: samba-doc
+%endif
+
+%description doc
+Samba-doc provides documentation files for both the server and client
+packages of Samba.
+%if %have_pversion
+%message_bugzilla samba3-doc
+%endif
+%if !%build_system
+%message_system
+%endif
+
+%package swat
+URL: http://www.samba.org
+Summary: The Samba Web Administration Tool.
+Requires: %{name}-server = %{version}
+Requires: xinetd
+Group: System/Servers
+%if %build_system
+Provides: samba-swat-ldap
+Obsoletes: samba-swat-ldap
+Provides: samba3-swat
+Obsoletes: samba3-swat
+%else
+#Provides: samba-swat
+%endif
+
+%description swat
+SWAT (the Samba Web Administration Tool) allows samba's smb.conf file
+to be remotely managed using your favourite web browser. For the time
+being this is being enabled on TCP port 901 via xinetd. Note that
+SWAT does not use SSL encryption, nor does it preserve comments in
+your smb.conf file. Webmin uses SSL encryption by default, and
+preserves comments in configuration files, even if it does not display
+them, and is therefore the preferred method for remotely managing
+Samba.
+%if %have_pversion
+%message_bugzilla samba3-swat
+%endif
+%if !%build_system
+%message_system
+%endif
+
+%if %build_winbind
+%package winbind
+URL: http://www.samba.org
+Summary: Samba-winbind daemon, utilities and documentation
+Group: System/Servers
+Requires: %{name}-common = %{version}
+%endif
+%if %build_winbind && !%build_system
+Conflicts: samba-winbind
+%endif
+%if %build_winbind
+%description winbind
+Provides the winbind daemon and testing tools to allow authentication
+and group/user enumeration from a Windows or Samba domain controller.
+%endif
+%if %have_pversion
+%message_bugzilla samba3-winbind
+%endif
+%if !%build_system
+%message_system
+%endif
+
+%if %build_wins
+%package -n nss_wins%{samba_major}
+URL: http://www.samba.org
+Summary: Name Service Switch service for WINS
+Group: System/Servers
+Requires: %{name}-common = %{version}
+PreReq: glibc
+%endif
+%if %build_wins && !%build_system
+Conflicts: nss_wins
+%endif
+%if %build_wins
+%description -n nss_wins%{samba_major}
+Provides the libnss_wins shared library which resolves NetBIOS names to
+IP addresses.
+%endif
+%if %have_pversion
+%message_bugzilla nss_wins3
+%endif
+%if !%build_system
+%message_system
+%endif
+
+%if %{?_with_test:1}%{!?_with_test:0}
+%package test
+URL: http://www.samba.org
+Summary: Debugging and benchmarking tools for samba
+Group: System/Servers
+Requires: %{name}-common = %{version}
+%endif
+%if %build_system && %{?_with_test:1}%{!?_with_test:0}
+Provides: samba3-test samba3-debug
+Obsoletes: samba3-test samba3-debug
+%endif
+%if !%build_system && %{?_with_test:1}%{!?_with_test:0}
+Provides: samba-test samba3-debug
+Obsoletes: samba3-debug
+%endif
+%if %{?_with_test:1}%{!?_with_test:0}
+
+%description test
+This package provides tools for benchmarking samba, and debugging
+the correct operation of tools against smb servers.
+%endif
+
+%if %build_system
+%package -n %{libname}
+URL: http://www.samba.org
+Summary: SMB Client Library
+Group: System/Libraries
+Provides: libsmbclient
+
+%description -n %{libname}
+This package contains the SMB client library, part of the samba
+suite of networking software, allowing other software to access
+SMB shares.
+%endif
+%if %have_pversion && %build_system
+%message_bugzilla %{libname}
+%endif
+
+%if %build_system
+%package -n %{libname}-devel
+URL: http://www.samba.org
+Summary: SMB Client Library Development files
+Group: Development/C
+Provides: libsmbclient-devel
+Requires: %{libname} = %{version}-%{release}
+
+%description -n %{libname}-devel
+This package contains the development files for the SMB client
+library, part of the samba suite of networking software, allowing
+the development of other software to access SMB shares.
+%endif
+%if %have_pversion && %build_system
+%message_bugzilla %{libname}-devel
+%endif
+
+%if %build_system
+%package -n %{libname}-static-devel
+URL: http://www.samba.org
+Summary: SMB Client Static Library Development files
+Group: System/Libraries
+Provides: libsmbclient-static-devel = %{version}-%{release}
+Requires: %{libname}-devel = %{version}-%{release}
+
+%description -n %{libname}-static-devel
+This package contains the static development files for the SMB
+client library, part of the samba suite of networking software,
+allowing the development of other software to access SMB shares.
+%endif
+%if %have_pversion && %build_system
+%message_bugzilla %{libname}-devel
+%endif
+
+#%package passdb-ldap
+#URL: http://www.samba.org
+#Summary: Samba password database plugin for LDAP
+#Group: System/Libraries
+#
+#%description passdb-ldap
+#The passdb-ldap package for samba provides a password database
+#backend allowing samba to store account details in an LDAP
+#database
+#_if %have_pversion
+#_message_bugzilla samba3-passdb-ldap
+#_endif
+#_if !%build_system
+#_message_system
+#_endif
+
+%ifnarch alpha
+%package passdb-mysql
+URL: http://www.samba.org
+Summary: Samba password database plugin for MySQL
+Group: System/Libraries
+Requires: %{name}-server = %{version}-%{release}
+%endif
+%ifnarch alpha && %build_system
+Obsoletes: samba3-passdb-mysql
+Provides: samba3-passdb-mysql
+%endif
+%ifnarch alpha
+
+%description passdb-mysql
+The passdb-mysql package for samba provides a password database
+backend allowing samba to store account details in a MySQL
+database
+%endif
+
+#does postgresql build on alpha?
+#ifnarch alpha
+%package passdb-pgsql
+URL: http://www.samba.org
+Summary: Samba password database plugin for PostgreSQL
+Group: System/Libraries
+Requires: %{name}-server = %{version}-%{release}
+#endif
+#ifnarch alpha && %build_system
+%if %build_system
+Obsoletes: samba3-passdb-pgsql
+Provides: samba3-passdb-pgsql
+%endif
+#ifnarch alpha
+
+%description passdb-pgsql
+The passdb-pgsql package for samba provides a password database
+backend allowing samba to store account details in a PostgreSQL
+database
+#endif
+
+%package passdb-xml
+URL: http://www.samba.org
+Summary: Samba password database plugin for XML files
+Group: System/Libraries
+Requires: %{name}-server = %{version}-%{release}
+%if %build_system
+Obsoletes: samba3-passdb-xml
+Provides: samba3-passdb-xml
+%endif
+
+%description passdb-xml
+The passdb-xml package for samba provides a password database
+backend allowing samba to store account details in XML files.
+%if %have_pversion
+%message_bugzilla samba3-passdb-xml
+%endif
+%if !%build_system
+%message_system
+%endif
+
+#Antivirus packages:
+%if %build_clamav
+%package vscan-clamav
+Summary: On-access virus scanning for samba using Clam Antivirus
+Group: System/Servers
+Requires: %{name}-server = %{version}
+Provides: %{name}-vscan
+Requires: clamd
+%description vscan-clamav
+A vfs-module for samba to implement on-access scanning using the
+Clam antivirus scanner daemon.
+%endif
+
+%if %build_fprot
+%package vscan-fprot
+Summary: On-access virus scanning for samba using FPROT
+Group: System/Servers
+Requires: %{name}-server = %{version}
+Provides: %{name}-vscan
+%description vscan-fprot
+A vfs-module for samba to implement on-access scanning using the
+FPROT antivirus software (which must be installed to use this).
+%endif
+
+%if %build_fsav
+%package vscan-fsecure
+Summary: On-access virus scanning for samba using F-Secure
+Group: System/Servers
+Requires: %{name}-server = %{version}
+Provides: %{name}-vscan
+%description vscan-fsecure
+A vfs-module for samba to implement on-access scanning using the
+F-Secure antivirus software (which must be installed to use this).
+%endif
+
+%if %build_icap
+%package vscan-icap
+Summary: On-access virus scanning for samba using Clam Antivirus
+Group: System/Servers
+Requires: %{name}-server = %{version}
+Provides: %{name}-icap
+%description vscan-icap
+A vfs-module for samba to implement on-access scanning using
+ICAP-capable antivirus software.
+%endif
+
+%if %build_kaspersky
+%package vscan-kaspersky
+Summary: On-access virus scanning for samba using Kaspersky
+Group: System/Servers
+Requires: %{name}-server = %{version}
+Provides: %{name}-vscan
+%description vscan-kaspersky
+A vfs-module for samba to implement on-access scanning using the
+Kaspersky antivirus software (which must be installed to use this).
+%endif
+
+%if %build_mks
+%package vscan-mks
+Summary: On-access virus scanning for samba using MKS
+Group: System/Servers
+Requires: %{name}-server = %{version}
+Provides: %{name}-vscan
+%description vscan-mks
+A vfs-module for samba to implement on-access scanning using the
+MKS antivirus software (which must be installed to use this).
+%endif
+
+%if %build_nai
+%package vscan-nai
+Summary: On-access virus scanning for samba using NAI McAfee
+Group: System/Servers
+Requires: %{name}-server = %{version}
+Provides: %{name}-vscan
+%description vscan-nai
+A vfs-module for samba to implement on-access scanning using the
+NAI McAfee antivirus software (which must be installed to use this).
+%endif
+
+%if %build_openav
+%package vscan-openav
+Summary: On-access virus scanning for samba using OpenAntivirus
+Group: System/Servers
+Requires: %{name}-server = %{version}
+Provides: %{name}-vscan
+%description vscan-openav
+A vfs-module for samba to implement on-access scanning using the
+OpenAntivirus antivirus software (which must be installed to use this).
+%endif
+
+%if %build_sophos
+%package vscan-sophos
+Summary: On-access virus scanning for samba using Sophos
+Group: System/Servers
+Requires: %{name}-server = %{version}
+Provides: %{name}-vscan
+%description vscan-sophos
+A vfs-module for samba to implement on-access scanning using the
+Sophos antivirus software (which must be installed to use this).
+%endif
+
+%if %build_symantec
+%package vscan-symantec
+Summary: On-access virus scanning for samba using Symantec
+Group: System/Servers
+Requires: %{name}-server = %{version}
+Provides: %{name}-vscan
+Autoreq: 0
+%description vscan-symantec
+A vfs-module for samba to implement on-access scanning using the
+Symantec antivirus software (which must be installed to use this).
+%endif
+
+
+%if %build_trend
+%package vscan-trend
+Summary: On-access virus scanning for samba using Trend
+Group: System/Servers
+Requires: %{name}-server = %{version}
+Provides: %{name}-vscan
+%description vscan-trend
+A vfs-module for samba to implement on-access scanning using the
+Trend antivirus software (which must be installed to use this).
+%endif
+
+%prep
+
+# Allow users to query build options with --with options:
+#%define opt_status(%1) %(echo %{1})
+%if %{?_with_options:1}%{!?_with_options:0}
+%define opt_status(%{1}) %(if [ %{1} -eq 1 ];then echo enabled;else echo disabled;fi)
+#exit 1
+%{error: }
+%{error:Build options available are:}
+%{error:--with[out] system Build as the system samba package [or as samba3]}
+%{error:--with[out] acl Build with support for file ACLs - %opt_status %build_acl}
+%{error:--with[out] winbind Build with Winbind support - %opt_status %build_winbind}
+%{error:--with[out] wins Build with WINS name resolution support - %opt_status %build_wins}
+%{error:--with[out] ldap Build with legacy (samba2) LDAP support - %opt_status %build_ldap}
+%{error:--with[out] ads Build with Active Directory support - %opt_status %build_ads}
+%{error:--with[out] scanners Enable on-access virus scanners - %opt_status %build_scanners}
+%{error: }
+%else
+%{error: }
+%{error: This rpm has build options available, use --with options to see them}
+%{error: }
+%endif
+
+%if %{?_with_options:1}%{!?_with_options:0} && %build_scanners
+#{error:--with scanners enables the following:%{?build_clamav:clamav,}%{?build_icap:icap,}%{?build_fprot:fprot,}%{?build_mks:mks,}%{?build_openav:openav,}%{?build_sophos:sophos,}%{?build_symantec:symantec,}%{?build_trend:trend}}
+%{error:--with scanners enables the following: clamav,icap,fprot,fsav,mks,nai,openav,sophos,trend}
+%{error: }
+%{error:To enable others (requires development libraries for the scanner):}
+%{error:--with symantec Enable on-access scanning with Symantec - %opt_status %build_symantec}
+%{error: }
+%endif
+
+%if %{?_with_options:1}%{!?_with_options:0}
+clear
+exit 1
+%endif
+
+
+%if %build_non_default
+RPM_EXTRA_OPTIONS="\
+%{?_with_system: --with system}\
+%{?_without_system: --without system}\
+%{?_with_acl: --with acl}\
+%{?_without_acl: --without acl}\
+%{?_with_winbind: --with winbind}\
+%{?_without_winbind: --without winbind}\
+%{?_with_wins: --with wins}\
+%{?_without_wins: --without wins}\
+%{?_with_ldap: --with ldap}\
+%{?_without_ldap: --without ldap}\
+%{?_with_ads: --with ads}\
+%{?_without_ads: --without ads}\
+%{?_with_scanners: --with scanners}\
+%{?_without_scanners: --without scanners}\
+"
+echo "Building a non-default rpm with the following command-line arguments:"
+echo "$RPM_EXTRA_OPTIONS"
+echo "This rpm was built with non-default options, thus, to build ">%{SOURCE7}
+echo "an identical rpm, you need to supply the following options">>%{SOURCE7}
+echo "at build time: $RPM_EXTRA_OPTIONS">>%{SOURCE7}
+echo -e "\n%{name}-%{version}-%{release}\n">>%{SOURCE7}
+%else
+echo "This rpm was built with default options">%{SOURCE7}
+echo -e "\n%{name}-%{version}-%{release}\n">>%{SOURCE7}
+%endif
+
+%if %build_vscan
+%setup -q -a 8 -n %{pkg_name}-%{source_ver}
+%else
+%setup -q -n %{pkg_name}-%{source_ver}
+%endif
+#%patch111 -p1
+%patch1 -p1 -b .smbw
+%patch4 -p1 -b .sbin
+%patch5 -p1
+# Version specific patches: current version
+%if !%have_pversion
+echo "Applying patches for current version: %{ver}"
+#%patch7 -p1 -b .lib64
+%patch9 -p1 -b .unixext
+#%patch10 -p1 -b .rpcclient-libs
+%patch11 -p1 -b .mdk
+%else
+# Version specific patches: upcoming version
+echo "Applying patches for new versions: %{pversion}"
+%patch8 -p1 -b .libsmbdir
+%endif
+
+# Limbo patches
+%if %have_pversion && %have_pre
+echo "Appling patches which should only be applied to prereleases"
+%endif
+
+# Fix quota compilation in glibc>2.3
+%if %mdkversion >= 910 && %mdkversion < 1000
+#grep "<linux/quota.h>" source/smbd/quotas.c >/dev/null && \
+perl -pi -e 's@<linux/quota.h>@<sys/quota.h>@' source/smbd/quotas.c
+%endif
+
+cp %{SOURCE7} .
+
+# Make a copy of examples so that we have a clean one for doc:
+cp -a examples examples.bin
+
+%if %build_vscan
+cp -a %{vscandir} %{vfsdir}
+#fix stupid directory names:
+#mv %{vfsdir}/%{vscandir}/openantivirus %{vfsdir}/%{vscandir}/oav
+# Inline replacement of config dir
+for av in clamav fprotd fsav icap kavp mksd mcdaemon oav sophos symantec trend
+ do
+ [ -e %{vfsdir}/%{vscandir}/*/vscan-$av.h ] && perl -pi -e \
+ 's,^#define PARAMCONF "/etc/samba,#define PARAMCONF "/etc/%{name},' \
+ %{vfsdir}/%{vscandir}/*/vscan-$av.h
+done
+#Inline edit vscan header:
+perl -pi -e 's/^# define SAMBA_VERSION_MAJOR 2/# define SAMBA_VERSION_MAJOR 3/g;s/# define SAMBA_VERSION_MINOR 2/# define SAMBA_VERSION_MINOR 0/g' %{vfsdir}/%{vscandir}/include/vscan-global.h
+%endif
+
+# Edit some files when not building system samba:
+%if !%build_system
+perl -pi -e 's/%{pkg_name}/%{name}/g' source/auth/pampass.c
+%endif
+
+#remove cvs internal files from docs:
+find docs examples -name '.cvsignore' -exec rm -f {} \;
+
+#make better doc trees:
+chmod -R a+rX examples docs *Manifest* README Roadmap COPYING
+mkdir -p clean-docs/samba-doc
+cp -a examples docs clean-docs/samba-doc
+mv -f clean-docs/samba-doc/examples/libsmbclient clean-docs/
+rm -Rf clean-docs/samba-doc/docs/{docbook,manpages,htmldocs,using_samba}
+ln -s %{_datadir}/swat%{samba_major}/using_samba/ clean-docs/samba-doc/docs/using_samba
+ln -sf %{_datadir}/swat%{samba_major}/help/ clean-docs/samba-doc/docs/htmldocs
+
+%build
+#%serverbuild
+(cd source
+CFLAGS=`echo "$RPM_OPT_FLAGS"|sed -e 's/-g//g'`
+%if %gcc331
+CFLAGS=`echo "$CFLAGS"|sed -e 's/-O2/-O/g'`
+%endif
+./autogen.sh
+# Don't use --with-fhs now, since it overrides libdir, it sets configdir,
+# lockdir,piddir logfilebase,privatedir and swatdir
+%configure --prefix=%{_prefix} \
+ --sysconfdir=%{_sysconfdir}/%{name} \
+ --localstatedir=/var \
+ --with-libdir=%{_libdir}/%{name} \
+ --with-privatedir=%{_sysconfdir}/%{name} \
+ --with-lockdir=/var/cache/%{name} \
+ --with-piddir=/var/run \
+ --with-swatdir=%{_datadir}/swat%{samba_major} \
+ --with-configdir=%{_sysconfdir}/%{name} \
+ --with-logfilebase=/var/log/%{name} \
+%if !%build_ads
+ --with-ads=no \
+%endif
+ --with-automount \
+ --with-smbmount \
+ --with-pam \
+ --with-pam_smbpass \
+%if %build_ldap
+ --with-ldapsam \
+%endif
+ --with-tdbsam \
+ --with-syslog \
+ --with-quotas \
+ --with-utmp \
+ --with-manpages-langs=en \
+%if %build_acl
+ --with-acl-support \
+%endif
+ --disable-mysqltest \
+ --with-expsam=%build_expsam \
+ --program-suffix=%{samba_major}
+# --with-shared-modules=pdb_ldap,idmap_ldap \
+# --with-manpages-langs=en,ja,pl \
+#_if !%build_system
+# --with-smbwrapper \
+#_endif
+# --with-nisplussam \
+# --with-fhs \
+
+#Fix the make file so we don't create debug information on 9.2
+%if %mdkversion == 920
+perl -pi -e 's/-g //g' Makefile
+%endif
+
+perl -pi -e 's|-Wl,-rpath,%{_libdir}||g;s|-Wl,-rpath -Wl,%{_libdir}||g' Makefile
+
+make proto_exists
+%make all libsmbclient smbfilter wins modules %{?_with_test: torture debug3html bin/log2pcap} bin/editreg bin/smbget client/mount.cifs
+
+)
+
+# Build mkntpasswd in examples/LDAP/ for smbldaptools
+make -C examples.bin/LDAP/smbldap-tools/mkntpwd
+
+%if %build_vscan
+echo -e "\n\nBuild antivirus VFS modules\n\n"
+pushd %{vfsdir}/%{vscandir}
+%configure
+#sed -i -e 's,openantivirus,oav,g' Makefile
+sed -i -e 's,^\(.*clamd socket name.*=\).*,\1 /var/lib/clamav/clamd.socket,g' clamav/vscan-clamav.conf
+make
+popd
+%endif
+
+# Build antivirus vfs objects
+%if %build_symantec
+echo "Building Symantec"
+make -C %{vfsdir}/%{vscandir} symantec
+%endif
+
+%install
+rm -rf $RPM_BUILD_ROOT
+mkdir -p $RPM_BUILD_ROOT
+
+#Ensure all docs are readable
+chmod a+r docs -R
+
+# Any entries here mean samba makefile is *really* broken:
+mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/%{name}
+mkdir -p $RPM_BUILD_ROOT/%{_datadir}
+mkdir -p $RPM_BUILD_ROOT%{_libdir}/%{name}/vfs
+
+(cd source
+make DESTDIR=$RPM_BUILD_ROOT LIBDIR=%{_libdir}/%{name} MANDIR=%{_mandir} install installclientlib installmodules)
+
+install -m755 source/bin/{editreg,smbget} %{buildroot}/%{_bindir}
+
+#need to stay
+mkdir -p $RPM_BUILD_ROOT/{sbin,bin}
+mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/{logrotate.d,pam.d,xinetd.d}
+mkdir -p $RPM_BUILD_ROOT/%{_initrddir}
+mkdir -p $RPM_BUILD_ROOT/var/cache/%{name}
+mkdir -p $RPM_BUILD_ROOT/var/log/%{name}
+mkdir -p $RPM_BUILD_ROOT/var/run/%{name}
+mkdir -p $RPM_BUILD_ROOT/var/spool/%{name}
+mkdir -p $RPM_BUILD_ROOT/%{_localstatedir}/%{name}/{netlogon,profiles,printers}
+mkdir -p $RPM_BUILD_ROOT/%{_localstatedir}/%{name}/printers/{W32X86,WIN40,W32ALPHA,W32MIPS,W32PPC}
+mkdir -p $RPM_BUILD_ROOT/%{_localstatedir}/%{name}/codepages/src
+mkdir -p $RPM_BUILD_ROOT/%{_lib}/security
+mkdir -p $RPM_BUILD_ROOT%{_libdir}
+mkdir -p $RPM_BUILD_ROOT%{_libdir}/%{name}/vfs
+mkdir -p $RPM_BUILD_ROOT%{_datadir}/%{name}/scripts
+
+#smbwrapper and pam_winbind not handled by make, pam_smbpass.so doesn't build
+#install -m 755 source/bin/smbwrapper.so $RPM_BUILD_ROOT%{_libdir}/smbwrapper%{samba_major}.so
+install -m 755 source/bin/pam_smbpass.so $RPM_BUILD_ROOT/%{_lib}/security/pam_smbpass%{samba_major}.so
+install -m 755 source/nsswitch/pam_winbind.so $RPM_BUILD_ROOT/%{_lib}/security/pam_winbind.so
+
+install -m755 source/bin/libsmbclient.a $RPM_BUILD_ROOT%{_libdir}/libsmbclient.a
+pushd $RPM_BUILD_ROOT/%{_libdir}
+[ -f libsmbclient.so ] && mv -f libsmbclient.so libsmbclient.so.%{libsmbmajor}
+ln -sf libsmbclient.so.%{libsmbmajor} libsmbclient.so
+popd
+
+# smbsh forgotten
+#install -m 755 source/bin/smbsh $RPM_BUILD_ROOT%{_bindir}/
+
+%if %build_vscan
+%makeinstall_std -C %{vfsdir}/%{vscandir}
+install -m 644 %{vfsdir}/%{vscandir}/*/vscan-*.conf %{buildroot}/%{_sysconfdir}/%{name}
+%endif
+
+#libnss_* not handled by make:
+# Install the nsswitch library extension file
+for i in wins winbind; do
+ install -m755 source/nsswitch/libnss_${i}.so $RPM_BUILD_ROOT/%{_lib}/libnss_${i}.so
+done
+# Make link for wins and winbind resolvers
+( cd $RPM_BUILD_ROOT/%{_lib}; ln -s libnss_wins.so libnss_wins.so.2; ln -s libnss_winbind.so libnss_winbind.so.2)
+
+%if %{?_with_test:1}%{!?_with_test:0}
+for i in {%{testbin}};do
+ install -m755 source/bin/${i} $RPM_BUILD_ROOT/%{_bindir}/${i}%{samba_major}
+done
+%endif
+
+# Install other stuff
+
+# install -m644 examples/VFS/recycle/recycle.conf $RPM_BUILD_ROOT%{_sysconfdir}/samba/
+ install -m644 packaging/Mandrake/smbusers $RPM_BUILD_ROOT%{_sysconfdir}/%{name}/smbusers
+ install -m755 packaging/Mandrake/smbprint $RPM_BUILD_ROOT/%{_bindir}
+ #install -m755 packaging/RedHat/smbadduser $RPM_BUILD_ROOT/usr/bin
+ install -m755 packaging/Mandrake/findsmb $RPM_BUILD_ROOT/%{_bindir}
+ install -m755 packaging/Mandrake/smb.init $RPM_BUILD_ROOT/%{_initrddir}/smb%{samba_major}
+ install -m755 packaging/Mandrake/smb.init $RPM_BUILD_ROOT/%{_sbindir}/%{name}
+ install -m755 packaging/Mandrake/winbind.init $RPM_BUILD_ROOT/%{_initrddir}/winbind
+# install -m755 packaging/Mandrake/wrepld.init $RPM_BUILD_ROOT/%{_initrddir}/wrepld%{samba_major}
+ install -m755 packaging/Mandrake/winbind.init $RPM_BUILD_ROOT/%{_sbindir}/winbind
+ install -m644 packaging/Mandrake/samba.pamd $RPM_BUILD_ROOT/%{_sysconfdir}/pam.d/%{name}
+ install -m644 packaging/Mandrake/system-auth-winbind.pamd $RPM_BUILD_ROOT/%{_sysconfdir}/pam.d/system-auth-winbind
+#
+ install -m644 %{SOURCE1} $RPM_BUILD_ROOT/%{_sysconfdir}/logrotate.d/%{name}
+# install -m644 packaging/Mandrake/samba-slapd-include.conf $RPM_BUILD_ROOT%{_sysconfdir}/%{name}/samba-slapd.include
+
+# Install smbldap-tools scripts:
+for i in examples/LDAP/smbldap-tools/*.pl; do
+ install -m 750 $i $RPM_BUILD_ROOT/%{_datadir}/%{name}/scripts/
+ ln -s %{_datadir}/%{name}/scripts/`basename $i` $RPM_BUILD_ROOT/%{_bindir}/`basename $i|sed -e 's/\.pl//g'`%{samba_major}
+done
+
+install -m 750 examples/LDAP/smbldap-tools/smbldap_tools.pm $RPM_BUILD_ROOT/%{_datadir}/%{name}/scripts/
+
+# The conf file
+install -m 640 examples/LDAP/smbldap-tools/smbldap_conf.pm $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}
+
+#Fix the smbldap-tools when not system samba:
+%if !%build_system
+perl -pi -e 's/^(use|package)(\s+)smbldap_(\w+);$/${1}${2}smbldap_${3}%{samba_major};/g' \
+%{buildroot}/%{_sysconfdir}/%{name}/smbldap_conf.pm \
+%{buildroot}/%{_datadir}/%{name}/scripts/smbldap*.p?
+perl -pi -e 's,/usr/local/sbin/mkntpwd,/usr/sbin/mkntpwd%{samba_major},g;s,553,421,g' %{buildroot}/%{_sysconfdir}/%{name}/smbldap_conf.pm
+perl -pi -e 's,\$smbldap_conf::SID,\$smbldap_conf3::SID,g' %{buildroot}/%{_datadir}/%{name}/scripts/smbldap*.p?
+%endif
+perl -pi -e 's,/usr/local/sbin/smbldap-passwd.pl,%{_datadir}/%{name}/scripts/smbldap-passwd.pl,g' %{buildroot}/%{_datadir}/%{name}/scripts/smbldap-useradd.pl
+
+# Link both smbldap*.pm into vendor-perl (any better ideas?)
+mkdir -p %{buildroot}/%{perl_vendorlib}
+ln -s %{_sysconfdir}/%{name}/smbldap_conf.pm $RPM_BUILD_ROOT/%{perl_vendorlib}/smbldap_conf%{samba_major}.pm
+ln -s %{_datadir}/%{name}/scripts/smbldap_tools.pm $RPM_BUILD_ROOT/%{perl_vendorlib}/smbldap_tools%{samba_major}.pm
+#mkntpwd
+install -m750 examples.bin/LDAP/smbldap-tools/mkntpwd/mkntpwd %{buildroot}/%{_sbindir}/mkntpwd%{samba_major}
+
+# Samba smbpasswd migration script:
+install -m755 examples/LDAP/convertSambaAccount $RPM_BUILD_ROOT/%{_datadir}/%{name}/scripts/
+
+# make a conf file for winbind from the default one:
+ cat packaging/Mandrake/smb.conf|sed -e 's/^; winbind/ winbind/g;s/^; obey pam/ obey pam/g; s/^; printer admin = @"D/ printer admin = @"D/g;s/^; password server = \*/ password server = \*/g;s/^; template/ template/g; s/^ security = user/ security = domain/g' > packaging/Mandrake/smb-winbind.conf
+ install -m644 packaging/Mandrake/smb-winbind.conf $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/smb-winbind.conf
+
+# Some inline fixes for smb.conf for non-winbind use
+install -m644 packaging/Mandrake/smb.conf $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/smb.conf
+cat packaging/Mandrake/smb.conf | \
+sed -e 's/^; printer admin = @adm/ printer admin = @adm/g' >$RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/smb.conf
+%if %build_cupspc
+perl -pi -e 's/printcap name = lpstat/printcap name = cups/g' $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/smb.conf
+perl -pi -e 's/printcap name = lpstat/printcap name = cups/g' $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/smb-winbind.conf
+%endif
+
+#%if !%build_system
+# Fix script paths in smb.conf
+#perl -pi -e 's,%{_datadir}/samba,%{_datadir}/%{name},g' %{buildroot}/%{_sysconfdir}/%{name}/smb*.conf
+#%endif
+
+
+#install mount.cifs
+install -m755 source/client/mount.cifs %{buildroot}/bin/mount.cifs%{samba_major}
+
+ echo 127.0.0.1 localhost > $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/lmhosts
+
+# Link smbspool to CUPS (does not require installed CUPS)
+
+ mkdir -p $RPM_BUILD_ROOT/%{_libdir}/cups/backend
+ ln -s %{_bindir}/smbspool%{alternative_major} $RPM_BUILD_ROOT/%{_libdir}/cups/backend/smb%{alternative_major}
+
+# xinetd support
+
+ mkdir -p $RPM_BUILD_ROOT/%{_sysconfdir}/xinetd.d
+ install -m644 %{SOURCE3} $RPM_BUILD_ROOT/%{_sysconfdir}/xinetd.d/swat%{samba_major}
+
+# menu support
+
+mkdir -p $RPM_BUILD_ROOT%{_menudir}
+cat > $RPM_BUILD_ROOT%{_menudir}/%{name}-swat << EOF
+?package(%{name}-swat):\
+command="gnome-moz-remote http://localhost:901/" \
+needs="gnome" \
+icon="swat%{samba_major}.png" \
+section="Configuration/Networking" \
+title="Samba Configuration (SWAT)" \
+longtitle="The Swat Samba Administration Tool"
+?package(%{name}-swat):\
+command="sh -c '\$BROWSER http://localhost:901/'" \
+needs="x11" \
+icon="swat%{samba_major}.png" \
+section="Configuration/Networking" \
+title="Samba Configuration (SWAT)" \
+longtitle="The Swat Samba Administration Tool"
+EOF
+
+mkdir -p $RPM_BUILD_ROOT%{_liconsdir} $RPM_BUILD_ROOT%{_iconsdir} $RPM_BUILD_ROOT%{_miconsdir}
+
+bzcat %{SOURCE4} > $RPM_BUILD_ROOT%{_liconsdir}/swat%{samba_major}.png
+bzcat %{SOURCE5} > $RPM_BUILD_ROOT%{_iconsdir}/swat%{samba_major}.png
+bzcat %{SOURCE6} > $RPM_BUILD_ROOT%{_miconsdir}/swat%{samba_major}.png
+
+bzcat %{SOURCE10}> $RPM_BUILD_ROOT%{_datadir}/%{name}/scripts/print-pdf
+bzcat %{SOURCE11}> $RPM_BUILD_ROOT%{_datadir}/%{name}/scripts/smb-migrate
+
+# Fix configs when not building system samba:
+
+#Client binaries will have suffixes while we use alternatives, even
+# if we are system samba
+%if !%build_system || %build_alternatives
+for OLD in %{buildroot}/%{_bindir}/{%{clientbin}} %{buildroot}/bin/%{client_bin} %{buildroot}/%{_libdir}/cups/backend/smb
+do
+ NEW=`echo ${OLD}%{alternative_major}`
+ [ -e $OLD ] && mv -f $OLD $NEW
+done
+for OLD in %{buildroot}/%{_mandir}/man?/{%{clientbin}}* %{buildroot}/%{_mandir}/man?/%{client_bin}*
+do
+ if [ -e $OLD ]
+ then
+ BASE=`perl -e '$_="'${OLD}'"; m,(%buildroot)(.*?)(\.[0-9]),;print "$1$2\n";'`
+ EXT=`echo $OLD|sed -e 's,'${BASE}',,g'`
+ NEW=`echo ${BASE}%{alternative_major}${EXT}`
+ mv $OLD $NEW
+ fi
+done
+%endif
+rm -f %{buildroot}/sbin/mount.smbfs
+# Link smbmount to /sbin/mount.smb and /sbin/mount.smbfs
+#I don't think it's possible for make to do this ...
+(cd $RPM_BUILD_ROOT/sbin
+ ln -s ..%{_bindir}/smbmount%{alternative_major} mount.smb%{alternative_major}
+ ln -s ..%{_bindir}/smbmount%{alternative_major} mount.smbfs%{alternative_major}
+)
+# Server/common binaries are versioned only if not system samba:
+%if !%build_system
+for OLD in %{buildroot}/%{_bindir}/{%{commonbin}} %{buildroot}/%{_bindir}/{%{serverbin}} %{buildroot}/%{_sbindir}/{%{serversbin},swat}
+do
+ NEW=`echo ${OLD}%{alternative_major}`
+ mv $OLD $NEW -f ||:
+done
+# And the man pages too:
+for OLD in %{buildroot}/%{_mandir}/man?/{%{commonbin},%{serverbin},%{serversbin},swat,{%testbin},smb.conf,lmhosts}*
+do
+ if [ -e $OLD ]
+ then
+ BASE=`perl -e '$_="'${OLD}'"; m,(%buildroot)(.*?)(\.[0-9]),;print "$1$2\n";'`
+# BASE=`perl -e '$name="'${OLD}'"; print "",($name =~ /(.*?)\.[0-9]/), "\n";'`
+ EXT=`echo $OLD|sed -e 's,'${BASE}',,g'`
+ NEW=`echo ${BASE}%{samba_major}${EXT}`
+ mv $OLD $NEW
+ fi
+done
+# Replace paths in config files and init scripts:
+for i in smb ;do
+ perl -pi -e 's,/subsys/'$i',/subsys/'$i'%{samba_major},g' $RPM_BUILD_ROOT/%{_initrddir}/${i}%{samba_major}
+done
+for i in %{_sysconfdir}/%{name}/smb.conf %{_initrddir}/smb%{samba_major} %{_sbindir}/%{name} %{_initrddir}/winbind /%{_sysconfdir}/logrotate.d/%{name} /%{_sysconfdir}/xinetd.d/swat%{samba_major} %{_initrddir}/wrepld%{samba_major}; do
+ perl -pi -e 's,/%{pkg_name},/%{name},g; s,smbd,%{_sbindir}/smbd%{samba_major},g; s,nmbd,%{_sbindir}/nmbd%{samba_major},g; s,/usr/sbin/swat,%{_sbindir}/swat%{samba_major},g;s,wrepld,%{_sbindir}/wrepld%{samba_major},g' $RPM_BUILD_ROOT/$i;
+done
+# Fix xinetd file for swat:
+perl -pi -e 's,/usr/sbin,%{_sbindir},g' $RPM_BUILD_ROOT/%{_sysconfdir}/xinetd.d/swat%{samba_major}
+%endif
+
+#Clean up unpackaged files:
+for i in %{_bindir}/pam_smbpass.so %{_bindir}/smbwrapper.so;do
+rm -f %{buildroot}/$i
+done
+
+# (sb) make a smb.conf.clean we can use for the merge, since an existing
+# smb.conf won't get overwritten
+cp $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/smb.conf $RPM_BUILD_ROOT/%{_datadir}/%{name}/smb.conf.clean
+
+# (sb) leave a README.mdk.conf to explain what has been done
+cat << EOF > $RPM_BUILD_ROOT/%{_datadir}/%{name}/README.mdk.conf
+In order to facilitate upgrading an existing samba install, and merging
+previous configuration data with any new syntax used by samba3, a merge
+script has attempted to combine your local configuration data with the
+new conf file format. The merged data is in smb.conf, with comments like
+
+ # *** merged from original smb.conf: ***
+
+near the additional entries. Any local shares should have been appended to
+smb.conf. A log of what took place should be in:
+
+ /var/log/samba/smb-migrate.log
+
+A clean samba3 smb.conf is in /usr/share/samba, named smb.conf.clean.
+Your original conf should be /etc/samba/smb.conf.tomerge.
+
+The actual merge script is /usr/share/samba/scripts/smb-migrate.
+
+Questions/issues: sbenedict@mandrakesoft.com
+
+EOF
+
+%clean
+rm -rf $RPM_BUILD_ROOT
+
+%post server
+
+%_post_service smb%{samba_major}
+#%_post_service wrepld%{samba_major}
+
+# Add a unix group for samba machine accounts
+groupadd -frg 421 machines
+
+# Migrate tdb's from /var/lock/samba (taken from official samba spec file):
+for i in /var/lock/samba/*.tdb
+do
+if [ -f $i ]; then
+ newname=`echo $i | sed -e's|var\/lock\/samba|var\/cache\/samba|'`
+ echo "Moving $i to $newname"
+ mv $i $newname
+fi
+done
+
+%post common
+# Basic migration script for pre-2.2.1 users,
+# since smb config moved from /etc to %{_sysconfdir}/samba
+
+# Let's create a proper %{_sysconfdir}/samba/smbpasswd file
+[ -f %{_sysconfdir}/%{name}/smbpasswd ] || {
+ echo "Creating password file for samba..."
+ touch %{_sysconfdir}/%{name}/smbpasswd
+}
+
+# And this too, in case we don't have smbd to create it for us
+[ -f /var/cache/%{name}/unexpected.tdb ] || {
+ touch /var/cache/%{name}/unexpected.tdb
+}
+
+# Let's define the proper paths for config files
+perl -pi -e 's/(\/etc\/)(smb)/\1%{name}\/\2/' %{_sysconfdir}/%{name}/smb.conf
+
+# Fix the logrotate.d file from smb and nmb to smbd and nmbd
+if [ -f %{_sysconfdir}/logrotate.d/samba ]; then
+ perl -pi -e 's/smb /smbd /' %{_sysconfdir}/logrotate.d/samba
+ perl -pi -e 's/nmb /nmbd /' %{_sysconfdir}/logrotate.d/samba
+fi
+
+# And not loose our machine account SID
+[ -f %{_sysconfdir}/MACHINE.SID ] && mv -f %{_sysconfdir}/MACHINE.SID %{_sysconfdir}/%{name}/ ||:
+
+%triggerpostun common -- samba-common < 3.0.1-3mdk
+# (sb) merge any existing smb.conf with new syntax file
+if [ $1 = 2 ]; then
+ # (sb) save existing smb.conf for merge
+ echo "Upgrade: copy smb.conf to smb.conf.tomerge for merging..."
+ cp -f %{_sysconfdir}/%{name}/smb.conf %{_sysconfdir}/%{name}/smb.conf.tomerge
+ echo "Upgrade: merging previous smb.conf..."
+ if [ -f %{_datadir}/%{name}/smb.conf.clean ]; then
+ cp %{_datadir}/%{name}/smb.conf.clean %{_sysconfdir}/%{name}/smb.conf
+ cp %{_datadir}/%{name}/README.mdk.conf %{_sysconfdir}/%{name}/
+ %{_datadir}/%{name}/scripts/smb-migrate commit
+ fi
+fi
+
+%postun common
+if [ -f %{_sysconfdir}/%{name}/README.mdk.conf ];then rm -f %{_sysconfdir}/%{name}/README.mdk.conf;fi
+
+%if %build_winbind
+%post winbind
+if [ $1 = 1 ]; then
+ /sbin/chkconfig winbind on
+ cp -af %{_sysconfdir}/nsswitch.conf %{_sysconfdir}/nsswitch.conf.rpmsave
+ cp -af %{_sysconfdir}/nsswitch.conf %{_sysconfdir}/nsswitch.conf.rpmtemp
+ for i in passwd group;do
+ grep ^$i %{_sysconfdir}/nsswitch.conf |grep -v 'winbind' >/dev/null
+ if [ $? = 0 ];then
+ echo "Adding a winbind entry to the $i section of %{_sysconfdir}/nsswitch.conf"
+ awk '/^'$i'/ {print $0 " winbind"};!/^'$i'/ {print}' %{_sysconfdir}/nsswitch.conf.rpmtemp >%{_sysconfdir}/nsswitch.conf;
+ cp -af %{_sysconfdir}/nsswitch.conf %{_sysconfdir}/nsswitch.conf.rpmtemp
+ else
+ echo "$i entry found in %{_sysconfdir}/nsswitch.conf"
+ fi
+ done
+ if [ -f %{_sysconfdir}/nsswitch.conf.rpmtemp ];then rm -f %{_sysconfdir}/nsswitch.conf.rpmtemp;fi
+fi
+
+%preun winbind
+if [ $1 = 0 ]; then
+ echo "Removing winbind entries from %{_sysconfdir}/nsswitch.conf"
+ perl -pi -e 's/ winbind//' %{_sysconfdir}/nsswitch.conf
+
+ /sbin/chkconfig winbind reset
+fi
+%endif %build_winbind
+
+%if %build_wins
+%post -n nss_wins%{samba_major}
+if [ $1 = 1 ]; then
+ cp -af %{_sysconfdir}/nsswitch.conf %{_sysconfdir}/nsswitch.conf.rpmsave
+ grep '^hosts' %{_sysconfdir}/nsswitch.conf |grep -v 'wins' >/dev/null
+ if [ $? = 0 ];then
+ echo "Adding a wins entry to the hosts section of %{_sysconfdir}/nsswitch.conf"
+ awk '/^hosts/ {print $0 " wins"};!/^hosts/ {print}' %{_sysconfdir}/nsswitch.conf.rpmsave >%{_sysconfdir}/nsswitch.conf;
+ else
+ echo "wins entry found in %{_sysconfdir}/nsswitch.conf"
+ fi
+# else
+# echo "Upgrade, leaving nsswitch.conf intact"
+fi
+
+%preun -n nss_wins%{samba_major}
+if [ $1 = 0 ]; then
+ echo "Removing wins entry from %{_sysconfdir}/nsswitch.conf"
+ perl -pi -e 's/ wins//' %{_sysconfdir}/nsswitch.conf
+#else
+# echo "Leaving %{_sysconfdir}/nsswitch.conf intact"
+fi
+%endif %build_wins
+
+%preun server
+
+%_preun_service smb%{samba_major}
+#%_preun_service wrepld%{samba_major}
+
+if [ $1 = 0 ] ; then
+# /sbin/chkconfig --level 35 smb reset
+# Let's not loose /var/cache/samba
+
+ if [ -d /var/cache/%{name} ]; then
+ mv -f /var/cache/%{name} /var/cache/%{name}.BAK
+ fi
+fi
+
+%post swat
+if [ -f /var/lock/subsys/xinetd ]; then
+ service xinetd reload >/dev/null 2>&1 || :
+fi
+%update_menus
+
+%postun swat
+
+# Remove swat entry from xinetd
+if [ $1 = 0 -a -f %{_sysconfdir}/xinetd.conf ] ; then
+rm -f %{_sysconfdir}/xinetd.d/swat%{samba_major}
+ service xinetd reload &>/dev/null || :
+fi
+
+if [ "$1" = "0" -a -x /usr/bin/update-menus ]; then /usr/bin/update-menus || true ; fi
+
+%clean_menus
+
+%if %build_system
+%post -n %{libname} -p /sbin/ldconfig
+%postun -n %{libname} -p /sbin/ldconfig
+%endif
+
+%if %build_alternatives
+%post client
+
+update-alternatives --install %{_bindir}/smbclient smbclient \
+%{_bindir}/smbclient%{alternative_major} 10 \
+$(for i in {/bin/mount.cifs,/sbin/{%{client_sbin}},%{_bindir}/{%{clientbin}}};do
+j=`basename $i`
+[ "$j" = "smbclient" ] || \
+echo -n " --slave ${i} ${j} ${i}%{alternative_major}";done) \
+--slave %{_libdir}/cups/backend/smb cups_smb %{_libdir}/cups/backend/smb%{alternative_major} || \
+update-alternatives --auto smbclient
+
+%preun client
+[ $1 = 0 ] && update-alternatives --remove smbclient %{_bindir}/smbclient%{alternative_major} ||:
+%endif
+
+%if %build_alternatives
+%triggerpostun client -- samba-client, samba2-client
+[ ! -e %{_bindir}/smbclient ] && update-alternatives --auto smbclient || :
+%endif
+
+%files server
+%defattr(-,root,root)
+%(for i in %{_sbindir}/{%{serversbin}}%{samba_major};do echo $i;done)
+%(for i in %{_bindir}/{%{serverbin}}%{samba_major};do echo $i;done)
+%attr(755,root,root) /%{_lib}/security/pam_smbpass*
+%dir %{_libdir}/%{name}/vfs
+%{_libdir}/%{name}/vfs/*.so
+%if %build_vscan
+%exclude %{_libdir}/%{name}/vfs/vscan*.so
+%endif
+%dir %{_libdir}/%{name}/pdb
+
+%attr(-,root,root) %config(noreplace) %{_sysconfdir}/%{name}/smbusers
+%attr(-,root,root) %config(noreplace) %{_initrddir}/smb%{samba_major}
+#%attr(-,root,root) %config(noreplace) %{_initrddir}/wrepld%{samba_major}
+%attr(-,root,root) %config(noreplace) %{_sysconfdir}/logrotate.d/%{name}
+%attr(-,root,root) %config(noreplace) %{_sysconfdir}/pam.d/%{name}
+#%attr(-,root,root) %config(noreplace) %{_sysconfdir}/%{name}/samba-slapd.include
+%(for i in %{_mandir}/man?/{%{serverbin},%{serversbin}}%{samba_major}\.[0-9]*;do echo $i|grep -v mkntpwd;done)
+%attr(775,root,adm) %dir %{_localstatedir}/%{name}/netlogon
+%attr(755,root,root) %dir %{_localstatedir}/%{name}/profiles
+%attr(755,root,root) %dir %{_localstatedir}/%{name}/printers
+%attr(2775,root,adm) %dir %{_localstatedir}/%{name}/printers/*
+%attr(1777,root,root) %dir /var/spool/%{name}
+%dir %{_datadir}/%{name}
+%dir %{_datadir}/%{name}/scripts
+%attr(0755,root,root) %{_datadir}/%{name}/scripts/print-pdf
+%attr(0750,root,adm) %{_datadir}/%{name}/scripts/smbldap*.pl
+%attr(0750,root,adm) %{_bindir}/smbldap*
+%attr(0640,root,adm) %config(noreplace) %{_sysconfdir}/%{name}/smbldap_conf.pm
+%attr(0644,root,root) %{_datadir}/%{name}/scripts/smbldap_tools.pm
+%{perl_vendorlib}/*.pm
+#%attr(0700,root,root) %{_datadir}/%{name}/scripts/*port_smbpasswd.pl
+%attr(0755,root,root) %{_datadir}/%{name}/scripts/convertSambaAccount
+
+
+%files doc
+%defattr(-,root,root)
+%doc README COPYING Manifest Read-Manifest-Now
+%doc WHATSNEW.txt Roadmap
+%doc README.%{name}-mandrake-rpm
+%doc clean-docs/samba-doc/docs
+%doc clean-docs/samba-doc/examples
+%attr(-,root,root) %{_datadir}/swat%{samba_major}/using_samba/
+
+%files swat
+%defattr(-,root,root)
+%config(noreplace) %{_sysconfdir}/xinetd.d/swat%{samba_major}
+#%attr(-,root,root) /sbin/*
+%{_sbindir}/swat%{samba_major}
+%{_menudir}/%{name}-swat
+%{_miconsdir}/*.png
+%{_liconsdir}/*.png
+%{_iconsdir}/*.png
+%attr(-,root,root) %{_datadir}/swat%{samba_major}/help/
+%attr(-,root,root) %{_datadir}/swat%{samba_major}/images/
+%attr(-,root,root) %{_datadir}/swat%{samba_major}/include/
+%lang(ja) %{_datadir}/swat%{samba_major}/lang/ja
+%lang(tr) %{_datadir}/swat%{samba_major}/lang/tr
+%{_mandir}/man8/swat*.8*
+%lang(de) %{_libdir}/%{name}/de.msg
+%lang(en) %{_libdir}/%{name}/en.msg
+%lang(fr) %{_libdir}/%{name}/fr.msg
+%lang(it) %{_libdir}/%{name}/it.msg
+%lang(ja) %{_libdir}/%{name}/ja.msg
+%lang(nl) %{_libdir}/%{name}/nl.msg
+%lang(pl) %{_libdir}/%{name}/pl.msg
+%lang(tr) %{_libdir}/%{name}/tr.msg
+#%doc swat/README
+
+%files client
+%defattr(-,root,root)
+%(for i in %{_bindir}/{%{clientbin}}%{alternative_major};do echo $i;done)
+%(for i in %{_mandir}/man?/{%{clientbin}}%{alternative_major}.?.*;do echo $i|grep -v smbprint;done)
+#xclude %{_mandir}/man?/smbget*
+%{_mandir}/man5/smbgetrc%{alternative_major}.5*
+%ifnarch alpha
+%(for i in /sbin/{%{client_sbin}}%{alternative_major};do echo $i;done)
+%attr(4755,root,root) /bin/mount.cifs%{alternative_major}
+%attr(755,root,root) %{_bindir}/smbmount%{alternative_major}
+%attr(4755,root,root) %{_bindir}/smbumount%{alternative_major}
+%attr(4755,root,root) %{_bindir}/smbmnt%{alternative_major}
+%{_mandir}/man8/smbmnt*.8*
+%{_mandir}/man8/smbmount*.8*
+%{_mandir}/man8/smbumount*.8*
+%{_mandir}/man8/mount.cifs*.8*
+%else
+%exclude %{_bindir}/smb*m*nt%{samba_major}
+%exclude %{_mandir}/man8/smb*m*nt*.8*
+%endif
+# Link of smbspool to CUPS
+/%{_libdir}/cups/backend/smb%{alternative_major}
+
+%files common
+%defattr(-,root,root)
+%dir /var/cache/%{name}
+%dir /var/log/%{name}
+%dir /var/run/%{name}
+%(for i in %{_bindir}/{%{commonbin},tdbtool}%{samba_major};do echo $i;done)
+%(for i in %{_mandir}/man?/{%{commonbin}}%{samba_major}\.[0-9]*;do echo $i;done)
+#%{_libdir}/smbwrapper%{samba_major}.so
+%dir %{_libdir}/%{name}
+%{_libdir}/%{name}/*.dat
+%{_libdir}/%{name}/charset
+#%{_libdir}/%{name}/lowcase.dat
+#%{_libdir}/%{name}/valid.dat
+%dir %{_sysconfdir}/%{name}
+%attr(-,root,root) %config(noreplace) %{_sysconfdir}/%{name}/smb.conf
+%attr(-,root,root) %config(noreplace) %{_sysconfdir}/%{name}/smb-winbind.conf
+%attr(-,root,root) %config(noreplace) %{_sysconfdir}/%{name}/lmhosts
+%dir %{_localstatedir}/%{name}
+%attr(-,root,root) %{_localstatedir}/%{name}/codepages
+%{_mandir}/man5/smb.conf*.5*
+%{_mandir}/man5/lmhosts*.5*
+#%{_mandir}/man7/Samba*.7*
+%dir %{_datadir}/swat%{samba_major}
+%attr(0750,root,adm) %{_datadir}/%{name}/scripts/smb-migrate
+%attr(-,root,root) %{_datadir}/%{name}/smb.conf.clean
+%attr(-,root,root) %{_datadir}/%{name}/README.mdk.conf
+
+%if %build_winbind
+%files winbind
+%defattr(-,root,root)
+%{_sbindir}/winbindd
+%{_sbindir}/winbind
+%{_bindir}/wbinfo
+%attr(755,root,root) /%{_lib}/security/pam_winbind*
+%attr(755,root,root) /%{_lib}/libnss_winbind*
+%attr(-,root,root) %config(noreplace) %{_initrddir}/winbind
+%attr(-,root,root) %config(noreplace) %{_sysconfdir}/pam.d/system-auth-winbind*
+%{_mandir}/man8/winbindd*.8*
+%{_mandir}/man1/wbinfo*.1*
+%endif
+
+%if %build_wins
+%files -n nss_wins%{samba_major}
+%defattr(-,root,root)
+%attr(755,root,root) /%{_lib}/libnss_wins.so*
+%endif
+
+%if %{?_with_test:1}%{!?_with_test:0}
+%files test
+%defattr(-,root,root)
+%(for i in %{_bindir}/{%{testbin}}%{samba_major};do echo $i;done)
+%{_mandir}/man1/vfstest%{samba_major}*.1*
+%exclude %{_mandir}/man1/log2pcap*.1*
+%else
+%exclude %{_mandir}/man1/vfstest%{samba_major}*.1*
+%exclude %{_mandir}/man1/log2pcap*.1*
+%endif
+
+%if %build_system
+%files -n %{libname}
+%defattr(-,root,root)
+%{_libdir}/libsmbclient.so.*
+%else
+%exclude %{_libdir}/libsmbclient.so.*
+%endif
+
+%if %build_system
+%files -n %{libname}-devel
+%defattr(-,root,root)
+%{_includedir}/*
+%{_libdir}/libsmbclient.so
+%doc clean-docs/libsmbclient/*
+%else
+%exclude %{_includedir}/*
+%exclude %{_libdir}/libsmbclient.so
+%endif
+
+%if %build_system
+%files -n %{libname}-static-devel
+%defattr(-,root,root)
+%{_libdir}/libsmbclient.a
+%else
+%exclude %{_libdir}/libsmbclient.a
+%endif
+
+#%files passdb-ldap
+#%defattr(-,root,root)
+#%{_libdir}/%{name}/*/*ldap.so
+
+%ifnarch alpha
+%files passdb-mysql
+%defattr(-,root,root)
+%{_libdir}/%{name}/pdb/*mysql.so
+%endif
+
+#ifnarch alpha
+%files passdb-pgsql
+%defattr(-,root,root)
+%{_libdir}/%{name}/pdb/*pgsql.so
+#endif
+
+%files passdb-xml
+%defattr(-,root,root)
+%{_libdir}/%{name}/pdb/*xml.so
+
+#Files for antivirus support:
+%if %build_clamav
+%files vscan-clamav
+%defattr(-,root,root)
+%{_libdir}/%{name}/vfs/vscan-clamav.so
+%config(noreplace) %{_sysconfdir}/%{name}/vscan-clamav.conf
+%doc %{vfsdir}/%{vscandir}/INSTALL
+%endif
+%if !%build_clamav && %build_vscan
+%exclude %{_libdir}/%{name}/vfs/vscan-clamav.so
+%exclude %{_sysconfdir}/%{name}/vscan-clamav.conf
+%endif
+
+%if %build_fprot
+%files vscan-fprot
+%defattr(-,root,root)
+%{_libdir}/%{name}/vfs/vscan-fprotd.so
+%config(noreplace) %{_sysconfdir}/%{name}/vscan-fprotd.conf
+%doc %{vfsdir}/%{vscandir}/INSTALL
+%endif
+%if !%build_fprot && %build_vscan
+%exclude %{_libdir}/%{name}/vfs/vscan-fprotd.so
+%exclude %{_sysconfdir}/%{name}/vscan-fprotd.conf
+%endif
+
+%if %build_fsav
+%files vscan-fsecure
+%defattr(-,root,root)
+%{_libdir}/%{name}/vfs/vscan-fsav.so
+%config(noreplace) %{_sysconfdir}/%{name}/vscan-fsav.conf
+%doc %{vfsdir}/%{vscandir}/INSTALL
+%endif
+%if !%build_fsav && %build_vscan
+%exclude %{_libdir}/%{name}/vfs/vscan-fsav.so
+%exclude %{_sysconfdir}/%{name}/vscan-fsav.conf
+%endif
+
+%if %build_icap
+%files vscan-icap
+%defattr(-,root,root)
+%{_libdir}/%{name}/vfs/vscan-icap.so
+%config(noreplace) %{_sysconfdir}/%{name}/vscan-icap.conf
+%doc %{vfsdir}/%{vscandir}/INSTALL
+%endif
+%if !%build_icap && %build_vscan
+%exclude %{_libdir}/%{name}/vfs/vscan-icap.so
+%exclude %{_sysconfdir}/%{name}/vscan-icap.conf
+%endif
+
+
+%if %build_kaspersky
+%files vscan-kaspersky
+%defattr(-,root,root)
+%{_libdir}/%{name}/vfs/vscan-kavp.so
+%config(noreplace) %{_sysconfdir}/%{name}/vscan-kavp.conf
+%doc %{vfsdir}/%{vscandir}/INSTALL
+%endif
+%if !%build_kaspersky && %build_vscan
+%exclude %{_libdir}/%{name}/vfs/vscan-kavp.so
+%exclude %{_sysconfdir}/%{name}/vscan-kavp.conf
+%endif
+
+%if %build_mks
+%files vscan-mks
+%defattr(-,root,root)
+%{_libdir}/%{name}/vfs/vscan-mksd.so
+%config(noreplace) %{_sysconfdir}/%{name}/vscan-mks*.conf
+%doc %{vfsdir}/%{vscandir}/INSTALL
+%endif
+%if !%build_mks && %build_vscan
+%exclude %{_libdir}/%{name}/vfs/vscan-mksd.so
+%exclude %{_sysconfdir}/%{name}/vscan-mks*.conf
+%endif
+
+%if %build_nai
+%files vscan-nai
+%defattr(-,root,root)
+%{_libdir}/%{name}/vfs/vscan-mcdaemon.so
+%config(noreplace) %{_sysconfdir}/%{name}/vscan-mcdaemon.conf
+%doc %{vfsdir}/%{vscandir}/INSTALL
+%endif
+%if !%build_nai && %build_vscan
+%exclude %{_libdir}/%{name}/vfs/vscan-mcdaemon.so
+%exclude %{_sysconfdir}/%{name}/vscan-mcdaemon.conf
+%endif
+
+%if %build_openav
+%files vscan-openav
+%defattr(-,root,root)
+%{_libdir}/%{name}/vfs/vscan-oav.so
+%config(noreplace) %{_sysconfdir}/%{name}/vscan-oav.conf
+%doc %{vfsdir}/%{vscandir}/INSTALL
+%endif
+%if !%build_openav && %build_vscan
+%exclude %{_libdir}/%{name}/vfs/vscan-oav.so
+%exclude %{_sysconfdir}/%{name}/vscan-oav.conf
+%endif
+
+%if %build_sophos
+%files vscan-sophos
+%defattr(-,root,root)
+%{_libdir}/%{name}/vfs/vscan-sophos.so
+%config(noreplace) %{_sysconfdir}/%{name}/vscan-sophos.conf
+%doc %{vfsdir}/%{vscandir}/INSTALL
+%endif
+%if !%build_sophos && %build_vscan
+%exclude %{_libdir}/%{name}/vfs/vscan-sophos.so
+%exclude %{_sysconfdir}/%{name}/vscan-sophos.conf
+%endif
+
+%if %build_symantec
+%files vscan-symantec
+%defattr(-,root,root)
+%{_libdir}/%{name}/vfs/vscan-symantec.so
+%config(noreplace) %{_sysconfdir}/%{name}/vscan-symantec.conf
+%doc %{vfsdir}/%{vscandir}/INSTALL
+%endif
+%if !%build_symantec && %build_vscan
+%exclude %{_sysconfdir}/%{name}/vscan-symantec.conf
+%endif
+
+%if %build_trend
+%files vscan-trend
+%defattr(-,root,root)
+%{_libdir}/%{name}/vfs/vscan-trend.so
+%config(noreplace) %{_sysconfdir}/%{name}/vscan-trend.conf
+%doc %{vfsdir}/%{vscandir}/INSTALL
+%endif
+%if !%build_trend && %build_vscan
+%exclude %{_libdir}/%{name}/vfs/vscan-trend.so
+%exclude %{_sysconfdir}/%{name}/vscan-trend.conf
+%endif
+
+%exclude %{_mandir}/man1/smbsh*.1*
+
+%changelog
+* Tue Nov 09 2004 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.8-1mdk
+- 3.0.8
+- add tdbtool to common
+- fix doc permissions (broken in tarball)
+
+* Fri Nov 05 2004 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.8-0.pre2.1mdk
+- 3.0.8pre2
+
+* Wed Oct 06 2004 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.7-3mdk
+- drop patch 23 to ldap schema (patch in 3.0.6 was to bring schema up-to-date
+ with pre-3.0.7 cvs) (#11960)
+- merge winbind init script fix into packaging patch
+- Don't set printcap name in pdf printer share (#11861)
+- allow official builds off-cluster (with _with_official macro defined)
+
+* Tue Sep 14 2004 Stew Benedict <sbenedict@mandrakesoft.com> 3.0.7-2mdk
+- fix typo in winbind init script that prevented stop
+ (in 3.0.6 too, patch27)
+
+* Mon Sep 13 2004 Stew Benedict <sbenedict@mandrakesoft.com> 3.0.7-1mdk
+- 3.0.7 (drop patch10,21,22,24,25,26; rediff patch23)
+
+* Thu Sep 09 2004 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.6-5mdk
+- patch for samba bug 1464
+- make release-depenent release tag more like security updates tags
+- sync smb.conf with drakwizard (which also fixes quoting of macros which
+ can have spaces)
+- add example admin share
+- patches from Gerald Carter
+
+* Mon Aug 31 2004 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.6-4mdk
+- Add Jerry's post-3.0.6 patches
+- fix bug 11088
+
+* Fri Aug 27 2004 Buchan Milne <bgmilne@linux-mandrake.com>3.0.6-3mdk
+- patch from Urban Widmark via Robert Sim (anthill bug 1086) to be able
+ to diable unix extensions in smbmount (and via 'unix extensions' in smb.conf)
+- magic-devel only available on 9.2 and up
+- allow building for stable release on the chroots on the cluster
+- fix patch8
+- fix build on older releases
+
+* Fri Aug 20 2004 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.6-2mdk
+- 3.0.6
+-drop P6 (merged), P7 (broken for now)
+-keep libsmbclient where it belongs (on x86 for now)
+-implement mandrake version-specific release number
+
+* Thu Aug 12 2004 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.5-2mdk
+- 3.0.5
+- fix pid file location (#10666)
+- merge amd64 fixes (P7)
+- make pdf printer work again, and other misc fixes to default config
+
+* Sun Jun 20 2004 Oden Eriksson <oeriksson@mandrakesoft.com> 3.0.5-0.pre1.3mdk
+- fix rpm group in libsmbclient0-devel (Goetz Waschk)
+
+* Sat Jun 19 2004 Oden Eriksson <oeriksson@mandrakesoft.com> 3.0.5-0.pre1.2mdk
+- fix deps
+
+* Wed May 26 2004 Buchan Milne <bgmilne@linux-mandrake.com>3.0.5-0.pre1.1mdk
+- fix building without scanners
+- 3.0.5pre1 (and drop patch from CVS)
+
+* Fri May 21 2004 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.4-3mdk
+- re-work scanner support
+
+* Thu May 13 2004 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.4-2mdk
+- 3.0.4
+- Patch for winbind (from samba bug 1315)
+
+* Thu Apr 29 2004 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.2a-4mdk
+- Fix samba-vscan (0.3.5), add clamav and icap, and build scanners by default
+- Fix default vscan-clamav config and add sample config for homes share
+- Add pgsql passdb backend
+
+* Mon Mar 01 2004 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.2a-3mdk
+- Fix default smbldap config
+- Don't clobber smb.conf backup for no reason
+
+* Mon Feb 16 2004 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.2a-2mdk
+- 3.0.2a
+- Only update smb.conf in upgrade from <3.0.1-3mdk (via trigger) and update
+ upgrade script (stew)
+
+* Mon Feb 09 2004 Buchan Milne <bgmilne@linux0mandrake.com> 3.0.2-2mdk
+- 3.0.2
+
+* Mon Feb 02 2004 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.2-0.rc2.1mdk
+- 3.0.2rc2
+
+* Tue Jan 6 2004 Stew Benedict <sbenedict@mandrakesoft.com> 3.0.1-5mdk
+- update migrate script, feedback from Luca Berra
+
+* Mon Jan 5 2004 Stew Benedict <sbenedict@mandrakesoft.com> 3.0.1-4mdk
+- re-enable relaxed CFLAGS to fix broken smbmount, smbclient
+
+* Fri Jan 2 2004 Stew Benedict <sbenedict@mandrakesoft.com> 3.0.1-3mdk
+- add migrate script to merge existing smb.conf
+
+* Fri Dec 19 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.1-2mdk
+- 3.0.1 final
+
+* Thu Dec 11 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.1-0.rc2.2mdk
+- 3.0.1rc2
+
+* Sat Dec 06 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.1-0.rc1.2mdk
+- rc1
+- samba-vscan-0.3.4
+
+* Fri Dec 05 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.1-0.pre3.5mdk
+- Allow winbind to start if old winbind ranges are used (ease upgrades)
+
+* Tue Nov 18 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.1-0.pre3.4mdk
+- Fix build as system on 8.2 (and probably earlier)
+
+* Sun Nov 16 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.1-0.pre3.3mdk
+- Ensure printer drivers keep permissions by default (setgid and inherit perms)
+
+* Fri Nov 14 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.1-0.pre3.2mdk
+- 3.0.1pre3
+- Add support for Mandrake 10.0 (as system samba)
+- Fix alternatives triggers
+- Fix obsoletes
+
+* Mon Nov 10 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.1-0.pre2.2mdk
+- 3.0.1pre2
+- misc spec files (pointed out by Luca Olivetti)
+- Fix path to smbldap-passwd.pl
+- Only allow one copy of winbind and nss_wins
+- Add trigger for alternatives
+
+* Sun Oct 12 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.1-0.pre1.2mdk
+- 3.0.1pre1
+- remove buildroot patch (p3), fixed upstream
+
+* Thu Sep 25 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-2mdk
+- 3.0.0 final
+
+* Sat Sep 13 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.rc4.2mdk
+- rc4
+- Don't update alternatives in pre/post scripts when not using alternatives
+- Fix case of --with-system without alternatives
+- Final fixes to smbldap-tools for non-system case
+- Remove duplicate docs (really - 1 character typo ...)
+- Update configs (fix winbind init script, add example scripts in smb.conf)
+
+* Tue Sep 09 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.rc3.2mdk
+- rc3
+- Fix mount.smb{,fs} alternatives (spotted by Laurent Culioli)
+
+* Thu Sep 04 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.rc2.3mdk
+- Fix alternatives
+- Fix libname (can I blame guillomovitch's evil line-wrapping spec mode?)
+- Fix smbldap-tools package/use names when not system samba
+- Don't conflict samba3-client with samba-client for now so we can install it
+
+* Fri Aug 29 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.rc2.2mdk
+- rc2
+- Remove patches 100-102 (upstream)
+- Fix libname
+- Alternatavise client
+- Better solution to avoid rpath
+
+* Fri Aug 22 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.rc1.3mdk
+- Fix build with test package (p100), but not by default (too big)
+- Fix (p101) for SID resolution when member of samba-2.2.x domain
+- Fix libsmbclient packages (thanks Gotz)
+- version mount.cifs, patch from CVS (p102), and setuid it
+- Clean up docs (guillomovitch spam ;-)
+
+* Sat Aug 16 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.rc1.2mdk
+- rc1
+- disable test subpackage since it's broken again
+
+* Mon Jul 28 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.beta3.3mdk
+- Rebuild for kerberos-1.3 on cooker
+- Put printer directories back
+- Add mount.cifs
+- Go back to standard optimisations
+
+* Thu Jul 17 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.beta3.2mdk
+- beta3
+- remove -g from cflags to avoid large static libraries
+- drop optimisation from O2 to O1 for gcc 3.3.1
+- own some directories for distriblint's benefit
+- use chrpath on distro's that have it to drastically reduce rpmlint score
+
+* Mon Jul 14 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.beta2.3mdk
+- place non-conditional excludes at the end of files list, to prevent causing
+ rpm in Mandrake <=8.2 from segfaulting when processing files.
+- Update default config
+
+* Wed Jul 02 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.beta2.2mdk
+- 3.0.0beta2
+- manually build editreg
+- Add some new man pages
+
+* Tue Jun 10 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.beta1.3mdk
+- add provision for passdb-ldap subpackage (it doesn't build like that yet)
+- avoid debugging info on cooker/9.2 for the moment
+- We probably don't need to autoconf (and can thus build on 8.1)
+- We can probably build without kerberos support (and thus on 8.0)
+- Don't require mysql-devel on alpha's (maybe we want to be able to disable
+ mysql support for other arches?)
+- We shouldn't need to specifically add openssl to include path, since ssl
+ support is deprecated.
+- png icons, change menu title to not conflict with ksambaplugin
+- update to samba-vscan-0.3.3beta1, but it still does not build the vscan
+ modules.
+- add -static-devel package
+- Add buildrequires for lib packages that are picked up if installed
+ (ncurses, popt) in an attempt to get slbd to build samba3
+- Fix default config (P100)
+
+* Sun Jun 08 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0.0-0.beta1.2mdk
+- Get packages into cooker (klama doesn't want to build this package ..)
+- samba-vscan-0.3.2b
+
+* Fri Jun 06 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha24.2mdk
+- Rename debug package to test and other fixes for rpm-4.2
+- prepare for beta1
+
+* Wed Apr 30 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha24.1mdk
+- Remove some files removed upstream
+- In builds from source, don't terminate on missing docs or unpackaged files
+ (if only we could do it for other missing files ...)
+
+* Mon Apr 28 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha24.0mdk
+- Reenable debug package by (--without debug to not build it), fixed post-a23
+- Add bugzilla note for builds from source (also intended for packages made
+ available on samba FTP site) at samba team request
+- Fix build from CVS (run autogen.sh, pass options to all rpm commands)
+- Appease distriblint, but not much to be done about /usr/share/swat3/ since
+ samba-doc owns some subdirs, and samba-swat others, and they can be installed
+ independantly.
+- Apply kaspersky vscan build fix from samba2
+- Final for alpha24
+
+* Wed Apr 23 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha23.3mdk
+- Small fixes in preparation for testing as system samba
+- Make debug package optional (--with debug) since it's often broken
+- Add support for 9.2 (including in-line smbd quota patch for glibc2.3)
+- Add --with options option, which will just show you the available options and exit
+
+* Sun Apr 06 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha23.2mdk
+- Alpha23
+- buildrequire autconf2.5
+- samba-vscan 0.3.2a
+- Remove patch 102 (upstreamed)
+
+* Thu Mar 06 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha22.2mdk
+- Alpha22
+- Add profiles binary to server and ntlm_auth to common
+- smbwrapper and torture target broken (only in 9.0?)
+- remove unused source 2
+
+* Tue Mar 04 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha21.4mdk
+- Don't provide samba-{server,client,common} when not system samba (bug #2617)
+- Don't build libsmbclient packages when not system samba
+- Fix conflict between samba-server and samba3-server (pam_smbpass)
+- Fix smbwrapper (from 2.2.7a-5mdk for bug #2356)
+- Fix codepage/charset example (bug #1574)
+
+* Thu Jan 23 2003 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha21.3mdk
+- samba-vscan 0.3.1 (and make it build again), including required inline edits
+- Make all vscan packages provide samba(3)-vscan
+- Build all vscan except kav (requires kaspersky lib) with --with-scanners
+- Add vscan-(scanner).conf files
+- Explicitly add ldapsam for 2.2 compatability when building --with ldap,
+ default build now uses new ldap passdb backend (ie you always get ldap)
+- Enable (experimental) tdb passdb backend
+- Fix file ownership conflicts between server and common
+- Cleanup configure, to match order of --help
+- Fix libdir location, was being overridden by --with-fhs
+- Split off a libsmbclient and -devel package
+- Add wins replication init script (patch 102)
+- Workaround passdb/pdb_xml.c not compiling
+- Workaround missing install targets for smbsh/smbwrapper.so in cvs
+- Inline patch smbd/quotas.c for Mandrake >9.0
+
+* Wed Nov 27 2002 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha21.2mdk
+- Remove patch 20,21,22,23,25,26 (upstream)
+- New destdir patch from cvs (18)
+- package installed but non-packaged files
+- new debug subpackage for vfstest and related files (it was that or nuke the
+ manpage ;-))
+- use _libdir for libdir instead of _sysconfdir
+- Update samba-vscan (untested)
+
+* Mon Oct 28 2002 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha20.3mdk
+- Fix mount.smbfs3 pointing to smbmount not in package
+- Remove unnecessary lines from install (now done by make)
+- Build with ldap and ads on all releases by default
+- Put av-stuff back
+
+* Mon Oct 21 2002 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha20.2mdk
+- When not building as system samba, avoid conflicting with system samba
+- Macro-ize as much as possible for above (aka finish cleanups)
+- Fix paths in init scripts and logrotate and xinetd
+- Fix provides and obsoletes so as to provide samba, but not obsolete
+ current stable until we have a stable release (when it's the system samba).
+- Add warnings to descriptions when not system samba.
+- This is now parallel installable with the normal samba release, for easy
+ testing. It shouldn't touch existing installations. Of course, only
+ one samba at a time on the same interface!
+
+* Sat Sep 28 2002 Buchan Milne <bgmilne@linux-mandrake.com> 3.0-0.alpha20.1mdk
+- Merge with 2.2.6pre2.2mdk
+- Detect alpha- and beta-, along with pre-releases
+
+* Tue Feb 05 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha14-0.1mdk
+- Sync with 2.2.3-2mdk (new --without options, detect when
+ building for a different distribution.
+
+* Mon Feb 04 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha14-0.0mdk
+- Sync with 2.2.2-10mdk, which added build-time options --with ldap,
+ winbind, acl, wins, mdk72, mdk80, mdk81, mdk82, cooker. Added
+ warning in description if built with these options.
+
+* Wed Jan 23 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha13-0.2mdk
+- Added if's for build_ads, which hopefully will add Active Directory
+ Support (by request).
+
+* Thu Jan 17 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha13-0.1mdk
+- More syncing with 2.2 rpm (post and postun scripts)
+- Testing without ldap
+
+* Thu Jan 17 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha13-0.0mdk
+- 3.0-alpha13
+- Fixed installman.sh patch.
+
+* Wed Jan 09 2002 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha12-0.1mdk
+- Fixed %post and %preun for nss_wins, added %post and %preun for
+ samba-winbind (chkconfig and winbind entries in nsswitch.conf)
+
+* Sun Dec 23 2001 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha12-0.0mdk
+- 3.0-alpha12
+- Sync up with changes made in 2.2.2 to support Mandrake 8.0, 7.2
+- Added new subpackage for swat
+- More if's for ldap.
+
+* Thu Dec 20 2001 Buchan Milne <bgmilne@cae.co.za> 3.0-alpha11-0.0mdk
+- 3.0-alpha11
+
+* Wed Dec 19 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha10-0.0mdk
+- 3.0-alpha10
+
+* Tue Dec 18 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha9-0.0mdk
+- 3.0-alpha9
+
+* Mon Dec 17 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha8-0.1mdk
+- Added net command to %files common, pdbedit and smbgroupedit to
+ %files, s/%{prefix}\/bin/%{_bindir}/ (the big cleanup).
+ Added patch to smb.init from 2.2.2 (got missed with 3.0-alpha1 patches)
+
+* Sun Dec 16 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha8-0.0mdk
+- Patch for installman.sh to handle lang=en correctly (p24)
+- added --with-manpages-langs=en,ja,pl (translated manpages), but there
+ aren't any manpages for these languages yet ... so we still
+ need %dir and %doc entries for them ...
+- patch (p25) to configure.in to support more than 2 languages.
+- addtosmbpass seems to have returned for now, but make_* have disappeared!
+
+* Fri Dec 14 2001 Buchan Milne <bgmilne@cae.co.za> 3.0alpha6-0.0mdk
+- DESTDIR patch for Makefile.in (p23), remove a lot of %%install scripts
+ this forces move of smbcontrol and smbmnt to %{prefix}/bin
+ removed --with-pam_smbpass as it doesn't compile.
+
+* Thu Dec 06 2001 Buchan Milne <bgmilne@cae.co.za> 3.0-0.0alpha1mdk
+- Samba 3.0alpha1 released (we missed Samba 3.0alpha0!)
+- Redid smbmount-sbin patch and smb.conf patch (20), removed xfs quota patch
+ (applied upstream), removed ook-patch (codepage directory totally different).
+- Added winbind.init (21) and system-auth-winbind.pamd (22). Patches 20-23
+ should be applied upstream before 3.0 ships ...
+
+* Wed Dec 05 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-6mdk
+- fixed typo in system-auth-winbind.pamd (--Thanks J. Gluck).
+- fixed %post xxx problem (smb not started in chkconfig --Thanks Viet & B. Kenworthy).
+
+* Fri Nov 23 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-5mdk
+- Had to remove the network recycle bin patch: it seems to mess up
+ file deletion from windows (files appear to be "already in use")
+
+* Tue Nov 13 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-4mdk
+- added network recycle bin patch:
+ <http://www.amherst.edu/~bbstone/howto/samba.html>
+- added "recycle bin = .recycled" parameter in smb.conf [homes].
+- fixed winbind/nss_wins perms (oh no I don't own that stuff ;o)
+
+* Mon Nov 12 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-3mdk
+- added %build 8.0 and 7.2, for tweakers to play around.
+- changed configure options:
+ . removed --with-mmap, --with-netatalk (obsolete).
+ . added --with-msdfs, --with-vfs (seems stable, but still need testing).
+
+* Mon Nov 12 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-2mdk
+- rebuilt with winbind and nss_wins enabled.
+
+* Wed Oct 31 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-1mdk
+- Rebuilt on cooker.
+
+* Wed Oct 31 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.992mdk
+- Patch for smb.conf to fix incorrect lpq command, typo in winbind,
+ and add sample linpopup command. Added print driver directories.
+- New XFS quota patch (untested!, samba runs, but do quotas work? We
+ can't check yet since the kernel doesn't seem to support XFS quotas!)
+
+* Fri Oct 19 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.2-0.99mdk
+- New samba.spec, almost ready for winbind operations. OLA for Buchan Milne
+ Who did a tremendous integration work on 2.2.2.
+ Rebuild on cooker, please test XFS (ACLs and quotas) again...
+
+* Mon Oct 15 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.9mdk
+- Samba-2.2.2. released! Use %defines to determine which subpackages
+ are built and which Mandrake release we are buiding on/for (hint: define
+ build_mdk81 1 for Mandrake 8.1 updates)
+
+* Sun Oct 14 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011014mdk
+- %post and %postun for nss_wins
+
+* Wed Oct 10 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011010mdk
+- New CVS snapshot, /etc/pam.d/system-auth-winbind added
+ with configuration to allow easy winbind setup.
+
+* Sun Oct 7 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011007mdk
+- Added new package nss_wins and moved smbpasswd to common (required by
+ winbind).
+
+* Sat Oct 6 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011006mdk
+- Added new package winbind.
+
+* Mon Oct 1 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20011001mdk
+- Removed patch to smb init.d file (applied in cvs)
+
+* Sun Sep 30 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20010930mdk
+- Added winbind init script, which still needs to check for running nmbd.
+
+* Thu Sep 27 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.2-0.20010927mdk
+- Built from samba-2.2.2-pre cvs, added winbindd, wbinfo, nss_winbind and
+ pam_winbind, moved pam_smbpass from samba-common to samba. We still
+ need a start-up script for winbind, or need to modify existing one.
+
+* Mon Sep 10 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-15mdk
+- Enabled acl support (XFS acls now supported by kernel-2.4.8-21mdk thx Chmou)
+ Added smbd patch to support XFS quota (Nathan Scott)
+
+* Mon Sep 10 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-14mdk
+- Oops! smbpasswd created in wrong directory...
+
+* Tue Sep 06 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-13mdk
+- Removed a wrong comment in smb.conf.
+ Added creation of smbpasswd during install.
+
+* Mon Aug 27 2001 Pixel <pixel@mandrakesoft.com> 2.2.1a-12mdk
+- really less verbose %%post
+
+* Sat Aug 25 2001 Geoffrey Lee <snailtalk@mandrakesoft.com> 2.2.1a-11mdk
+- Fix shared libs in /usr/bin silliness.
+
+* Thu Aug 23 2001 Pixel <pixel@mandrakesoft.com> 2.2.1a-10mdk
+- less verbose %%post
+
+* Wed Aug 22 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1a-9mdk
+- Added smbcacls (missing in %files), modification to smb.conf: ([printers]
+ is still needed, even with point-and-print!, user add script should
+ use name and not gid, since we may not get the gid . New script for
+ putting manpages in place (still need to be added in %files!). Moved
+ smbcontrol to sbin and added it and its man page to %files.
+
+* Wed Aug 22 2001 Pixel <pixel@mandrakesoft.com> 2.2.1a-8mdk
+- cleanup /var/lib/samba/codepage/src
+
+* Tue Aug 21 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-7mdk
+- moved codepage generation to %%install and codepage dir to /var/lib/samba
+
+* Tue Aug 21 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-6mdk
+- /lib/* was in both samba and samba-common
+ Introducing samba-doc: "alas, for the sake of thy modem, shalt thou remember
+ when Samba was under the Megabyte..."
+
+* Fri Aug 03 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-5mdk
+- Added "the gc touch" to smbinit through the use of killall -0 instead of
+ grep cupsd | grep -v grep (too many greps :o)
+
+* Wed Jul 18 2001 Stefan van der Eijk <stefan@eijk.nu> 2.2.1a-4mdk
+- BuildRequires: libcups-devel
+- Removed BuildRequires: openssl-devel
+
+* Fri Jul 13 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1a-3mdk
+- replace chkconfig --add/del with --level 35 on/reset.
+
+* Fri Jul 13 2001 Geoffrey Lee <snailtalk@mandrakesoft.cm> 2.2.1a-2mdk
+- Replace discription s/inetd/xinetd/, we all love xinetd, blah.
+
+* Thu Jul 12 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1a-1mdk
+- Bugfix release. Fixed add user script, added print$ share and printer admin
+ We need to test interaction of new print support with CUPS, but printer
+ driver uploads should work.
+
+* Wed Jul 11 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-17mdk
+- fixed smb.conf a bit, rebuilt on cooker.
+
+* Tue Jul 10 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1-16mdk
+- Finally, samba 2.2.1 has actually been release. At least we were ready!
+ Cleaned up smb.conf, and added some useful entries for domain controlling.
+ Migrated changes made in samba's samba2.spec for 2.2.1 to this file.
+ Added groupadd command in post to create a group for samba machine accounts.
+ (We should still check the postun, samba removes pam, logs and cache)
+
+* Tue Jun 26 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-15mdk
+- fixed smbwrapper compile options.
+
+* Tue Jun 26 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-14mdk
+- added LFS support.
+ added smbwrapper support (smbsh)
+
+* Wed Jun 20 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-13mdk
+- /sbin/mount.smb and /sbin/mount.smbfs now point to the correct location
+ of smbmount (/usr/bin/smbmount)
+
+* Tue Jun 19 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-12mdk
+- smbmount and smbumount are now in /usr/bin and SUID.
+ added ||: to triggerpostun son you don't get error 1 anymore when rpm -e
+ Checked the .bz2 sources with file *: everything is OK now (I'm so stupid ;o)!
+
+* Tue Jun 19 2001 Geoffrey Lee <snailtalk@mandrakesoft.com> 2.2.1-11mdk
+- s/Copyright/License/;
+- Stop Sylvester from pretending .gz source to be .bz2 source via filename
+ aka really bzip2 the source.
+
+* Mon Jun 18 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-10mdk
+- changed Till's startup script modifications: now samba is being reloaded
+ automatically 1 minute after it has started (same reasons as below in 9mdk)
+ added _post_ and _preun_ for service smb
+ fixed creation of /var/lib/samba/{netlogon,profiles} (%dir was missing)
+
+* Thu Jun 14 2001 Till Kamppeter <till@mandrakesoft.com> 2.2.1-9mdk
+- Modified the Samba startup script so that in case of CUPS being used as
+ printing system Samba only starts when the CUPS daemon is ready to accept
+ requests. Otherwise the CUPS queues would not appear as Samba shares.
+
+* Mon Jun 11 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-8mdk
+- patched smbmount.c to have it call smbmnt in sbin (thanks Seb).
+
+* Wed May 30 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-7mdk
+- put SWAT menu icons back in place.
+
+* Mon May 28 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-6mdk
+- OOPS! fixed smbmount symlinks
+
+* Mon May 28 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-5mdk
+- removed inetd postun script, replaced with xinetd.
+ updated binary list (smbcacls...)
+ cleaned samba.spec
+
+* Mon May 28 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1-4mdk
+- Changed configure options to point to correct log and codepage directories,
+ added crude script to fix logrotate file for new log file names, updated
+ patches to work with current CVS.
+
+* Thu May 24 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-3mdk
+- Cleaned and updated the %files section.
+
+* Sat May 19 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.1-2mdk
+- Moved all samba files from /etc to /etc/samba (Thanks DomS!).
+ Fixed fixinit patch (/etc/samba/smb.conf)
+
+* Fri May 18 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.1-1mdk
+- Now use packaging/Mandrake/smb.conf, removed unused and obsolete
+ patches, moved netlogon and profile shares to /var/lib/samba in the
+ smb.conf to match the spec file. Added configuration for ntlogon to
+ smb.conf. Removed pam-foo, fixinit and makefilepath patches. Removed
+ symlink I introduced in 2.2.0-1mdk
+
+* Thu May 3 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.0-5mdk
+- Added more configure options. Changed Description field (thx John T).
+
+* Wed Apr 25 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.0-4mdk
+- moved netlogon and profiles to /var/lib/samba by popular demand ;o)
+
+* Tue Apr 24 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.0-3mdk
+- moved netlogon and profiles back to /home.
+
+* Fri Apr 20 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.2.0-2mdk
+- fixed post inetd/xinetd script&
+
+* Thu Apr 19 2001 Buchan Milne <bgmilne@cae.co.za> 2.2.0-1mdk
+- Upgrade to 2.2.0. Merged most of 2.0.7-25mdk's patches (beware
+ nasty "ln -sf samba-%{ver} ../samba-2.0.7" hack to force some patches
+ to take. smbadduser and addtosmbpass seem to have disappeared. Moved
+ all Mandrake-specific files to packaging/Mandrake and made patches
+ from those shipped with samba. Moved netlogon to /home/samba and added
+ /home/samba/profiles. Added winbind,smbfilter and debug2html to make command.
+
+* Thu Apr 12 2001 Frederic Crozat <fcrozat@mandrakesoft.com> 2.0.7-25mdk
+- Fix menu entry and provide separate menu entry for GNOME
+ (nautilus doesn't support HTTP authentication yet)
+- Add icons in package
+
+* Fri Mar 30 2001 Frederic Lepied <flepied@mandrakesoft.com> 2.0.7-24mdk
+- use new server macros
+
+* Wed Mar 21 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-23mdk
+- check whether /etc/inetd.conf exists (upgrade) or not (fresh install).
+
+* Thu Mar 15 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-22mdk
+- spec cosmetics, added '-r' option to lpr-cups command line so files are
+ removed from /var/spool/samba after printing.
+
+* Tue Mar 06 2001 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-21mdk
+- merged last rh patches.
+
+* Thu Nov 23 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-20mdk
+- removed dependencies on cups and cups-devel so one can install samba without using cups
+- added /home/netlogon
+
+* Mon Nov 20 2000 Till Kamppeter <till@mandrakesoft.com> 2.0.7-19mdk
+- Changed default print command in /etc/smb.conf, so that the Windows
+ driver of the printer has to be used on the client.
+- Fixed bug in smbspool which prevented from printing from a
+ Linux-Samba-CUPS client to a Windows server through the guest account.
+
+* Mon Oct 16 2000 Till Kamppeter <till@mandrakesoft.com> 2.0.7-18mdk
+- Moved "smbspool" (Samba client of CUPS) to the samba-client package
+
+* Sat Oct 7 2000 Stefan van der Eijk <s.vandereijk@chello.nl> 2.0.7-17mdk
+- Added RedHat's "quota" patch to samba-glibc21.patch.bz2, this fixes
+ quota related compile problems on the alpha.
+
+* Wed Oct 4 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-16mdk
+- Fixed 'guest ok = ok' flag in smb.conf
+
+* Tue Oct 3 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-15mdk
+- Allowed guest account to print in smb.conf
+- added swat icon in menu
+
+* Tue Oct 3 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-14mdk
+- Removed rh ssl patch and --with-ssl flag: not appropriate for 7.2
+
+* Tue Oct 3 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-13mdk
+- Changed fixinit patch.
+- Changed smb.conf for better CUPS configuration.
+- Thanks Fred for doing this ---vvv.
+
+* Tue Oct 3 2000 Frederic Lepied <flepied@mandrakesoft.com> 2.0.7-12mdk
+- menu entry for web configuration tool.
+- merge with rh: xinetd + ssl + pam_stack.
+- Added smbadduser rh-bugfix w/o relocation of config-files.
+
+* Mon Oct 2 2000 Frederic Lepied <flepied@mandrakesoft.com> 2.0.7-11mdk
+- added build requires on cups-devel and pam-devel.
+
+* Mon Oct 2 2000 Till Kamppeter <till@mandrakesoft.com> 2.0.7-10mdk
+- Fixed smb.conf entry for CUPS: "printcap name = lpstat", "lpstats" was
+ wrong.
+
+* Mon Sep 25 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-9mdk
+- Cosmetic changes to make rpmlint more happy
+
+* Wed Sep 11 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-8mdk
+- added linkage to the using_samba book in swat
+
+* Fri Sep 01 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-7mdk
+- Added CUPS support to smb.conf
+- Added internationalization options to smb.conf [Global]
+
+* Wed Aug 30 2000 Till Kamppeter <till@mandrakesoft.com> 2.0.7-6mdk
+- Put "smbspool" to the files to install
+
+* Wed Aug 30 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-5mdk
+- Did some cleaning in the patches
+
+* Fri Jul 28 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-4mdk
+- relocated man pages from /usr/man to /usr/share/man for compatibility reasons
+
+* Fri Jul 28 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-3mdk
+- added make_unicodemap and build of unicode_map.$i in the spec file
+
+* Fri Jul 28 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-2mdk
+- renamed /etc/codepage/codepage.$i into /etc/codepage/unicode_map.$i to fix smbmount bug.
+
+* Fri Jul 07 2000 Sylvestre Taburet <staburet@mandrakesoft.com> 2.0.7-1mdk
+- 2.0.7
+
+* Wed Apr 05 2000 Francis Galiegue <fg@mandrakesoft.com> 2.0.6-4mdk
+
+- Titi sucks, does not put versions in changelog
+- Fixed groups for -common and -client
+- /usr/sbin/samba is no config file
+
+* Thu Mar 23 2000 Thierry Vignaud <tvignaud@mandrakesoft.com>
+- fix buggy post install script (pixel)
+
+* Fri Mar 17 2000 Francis Galiegue <francis@mandrakesoft.com> 2.0.6-2mdk
+
+- Changed group according to 7.1 specs
+- Some spec file changes
+- Let spec-helper do its job
+
+* Thu Nov 25 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com>
+- 2.0.6.
+
+* Tue Nov 2 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com>
+- Merge with rh changes.
+- Split in 3 packages.
+
+* Fri Aug 13 1999 Pablo Saratxaga <pablo@@mandrakesoft.com>
+- corrected a bug with %post (the $1 parameter is "1" in case of
+ a first install, not "0". That parameter is the number of packages
+ of the same name that will exist after running all the steps if nothing
+ is removed; so it is "1" after first isntall, "2" for a second install
+ or an upgrade, and "0" for a removal)
+
+* Wed Jul 28 1999 Pablo Saratxaga <pablo@@mandrakesoft.com>
+- made smbmnt and smbumount suid root, and only executable by group 'smb'
+ add to 'smb' group any user that should be allowed to mount/unmount
+ SMB shared directories
+
+* Fri Jul 23 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com>
+- 2.0.5a (bug security fix).
+
+* Wed Jul 21 1999 Axalon Bloodstone <axalon@linux-mandrake.com>
+- 2.0.5
+- cs/da/de/fi/fr/it/tr descriptions/summaries
+
+* Sun Jun 13 1999 Bernhard Rosenkränzer <bero@mandrakesoft.com>
+- 2.0.4b
+- recompile on a system that works ;)
+
+* Wed Apr 21 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com>
+- Mandrake adaptations.
+- Bzip2 man-pages.
+
+* Fri Mar 26 1999 Bill Nottingham <notting@redhat.com>
+- add a mount.smb to make smb mounting a little easier.
+- smb filesystems apparently do not work on alpha. Oops.
+
+* Thu Mar 25 1999 Bill Nottingham <notting@redhat.com>
+- always create codepages
+
+* Tue Mar 23 1999 Bill Nottingham <notting@redhat.com>
+- logrotate changes
+
+* Sun Mar 21 1999 Cristian Gafton <gafton@redhat.com>
+- auto rebuild in the new build environment (release 3)
+
+* Fri Mar 19 1999 Preston Brown <pbrown@redhat.com>
+- updated init script to use graceful restart (not stop/start)
+
+* Tue Mar 9 1999 Bill Nottingham <notting@redhat.com>
+- update to 2.0.3
+
+* Thu Feb 18 1999 Bill Nottingham <notting@redhat.com>
+- update to 2.0.2
+
+* Mon Feb 15 1999 Bill Nottingham <notting@redhat.com>
+- swat swat
+
+* Tue Feb 9 1999 Bill Nottingham <notting@redhat.com>
+- fix bash2 breakage in post script
+
+* Fri Feb 5 1999 Bill Nottingham <notting@redhat.com>
+- update to 2.0.0
+
+* Mon Oct 12 1998 Cristian Gafton <gafton@redhat.com>
+- make sure all binaries are stripped
+
+* Thu Sep 17 1998 Jeff Johnson <jbj@redhat.com>
+- update to 1.9.18p10.
+- fix %triggerpostun.
+
+* Tue Jul 07 1998 Erik Troan <ewt@redhat.com>
+- updated postun triggerscript to check $0
+- clear /etc/codepages from %preun instead of %postun
+
+* Mon Jun 08 1998 Erik Troan <ewt@redhat.com>
+- made the %postun script a tad less agressive; no reason to remove
+ the logs or lock file (after all, if the lock file is still there,
+ samba is still running)
+- the %postun and %preun should only exectute if this is the final
+ removal
+- migrated %triggerpostun from Red Hat's samba package to work around
+ packaging problems in some Red Hat samba releases
+
+* Sun Apr 26 1998 John H Terpstra <jht@samba.anu.edu.au>
+- minor tidy up in preparation for release of 1.9.18p5
+- added findsmb utility from SGI package
+
+* Wed Mar 18 1998 John H Terpstra <jht@samba.anu.edu.au>
+- Updated version and codepage info.
+- Release to test name resolve order
+
+* Sat Jan 24 1998 John H Terpstra <jht@samba.anu.edu.au>
+- Many optimisations (some suggested by Manoj Kasichainula <manojk@io.com>
+- Use of chkconfig in place of individual symlinks to /etc/rc.d/init/smb
+- Compounded make line
+- Updated smb.init restart mechanism
+- Use compound mkdir -p line instead of individual calls to mkdir
+- Fixed smb.conf file path for log files
+- Fixed smb.conf file path for incoming smb print spool directory
+- Added a number of options to smb.conf file
+- Added smbadduser command (missed from all previous RPMs) - Doooh!
+- Added smbuser file and smb.conf file updates for username map
projects / samba / blobdiff