--- /dev/null
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2004-04-01.17
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch. It can only install one file at a time, a restriction
+# shared with many OS's install programs.
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+transformbasename=
+transform_arg=
+instcmd="$mvprog"
+chmodcmd="$chmodprog 0755"
+chowncmd=
+chgrpcmd=
+stripcmd=
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=
+dst=
+dir_arg=
+
+usage="Usage: $0 [OPTION]... SRCFILE DSTFILE
+ or: $0 [OPTION]... SRCFILES... DIRECTORY
+ or: $0 -d DIRECTORIES...
+
+In the first form, install SRCFILE to DSTFILE, removing SRCFILE by default.
+In the second, create the directory path DIR.
+
+Options:
+-b=TRANSFORMBASENAME
+-c copy source (using $cpprog) instead of moving (using $mvprog).
+-d create directories instead of installing files.
+-g GROUP $chgrp installed files to GROUP.
+-m MODE $chmod installed files to MODE.
+-o USER $chown installed files to USER.
+-s strip installed files (using $stripprog).
+-t=TRANSFORM
+--help display this help and exit.
+--version display version info and exit.
+
+Environment variables override the default commands:
+ CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
+"
+
+while test -n "$1"; do
+ case $1 in
+ -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+ shift
+ continue;;
+
+ -c) instcmd=$cpprog
+ shift
+ continue;;
+
+ -d) dir_arg=true
+ shift
+ continue;;
+
+ -g) chgrpcmd="$chgrpprog $2"
+ shift
+ shift
+ continue;;
+
+ --help) echo "$usage"; exit 0;;
+
+ -m) chmodcmd="$chmodprog $2"
+ shift
+ shift
+ continue;;
+
+ -o) chowncmd="$chownprog $2"
+ shift
+ shift
+ continue;;
+
+ -s) stripcmd=$stripprog
+ shift
+ continue;;
+
+ -t=*) transformarg=`echo $1 | sed 's/-t=//'`
+ shift
+ continue;;
+
+ --version) echo "$0 $scriptversion"; exit 0;;
+
+ *) # When -d is used, all remaining arguments are directories to create.
+ test -n "$dir_arg" && break
+ # Otherwise, the last argument is the destination. Remove it from $@.
+ for arg
+ do
+ if test -n "$dstarg"; then
+ # $@ is not empty: it contains at least $arg.
+ set fnord "$@" "$dstarg"
+ shift # fnord
+ fi
+ shift # arg
+ dstarg=$arg
+ done
+ break;;
+ esac
+done
+
+if test -z "$1"; then
+ if test -z "$dir_arg"; then
+ echo "$0: no input file specified." >&2
+ exit 1
+ fi
+ # It's OK to call `install-sh -d' without argument.
+ # This can happen when creating conditional directories.
+ exit 0
+fi
+
+for src
+do
+ # Protect names starting with `-'.
+ case $src in
+ -*) src=./$src ;;
+ esac
+
+ if test -n "$dir_arg"; then
+ dst=$src
+ src=
+
+ if test -d "$dst"; then
+ instcmd=:
+ chmodcmd=
+ else
+ instcmd=$mkdirprog
+ fi
+ else
+ # Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+ # might cause directories to be created, which would be especially bad
+ # if $src (and thus $dsttmp) contains '*'.
+ if test ! -f "$src" && test ! -d "$src"; then
+ echo "$0: $src does not exist." >&2
+ exit 1
+ fi
+
+ if test -z "$dstarg"; then
+ echo "$0: no destination specified." >&2
+ exit 1
+ fi
+
+ dst=$dstarg
+ # Protect names starting with `-'.
+ case $dst in
+ -*) dst=./$dst ;;
+ esac
+
+ # If destination is a directory, append the input filename; won't work
+ # if double slashes aren't ignored.
+ if test -d "$dst"; then
+ dst=$dst/`basename "$src"`
+ fi
+ fi
+
+ # This sed command emulates the dirname command.
+ dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+
+ # Make sure that the destination directory exists.
+
+ # Skip lots of stat calls in the usual case.
+ if test ! -d "$dstdir"; then
+ defaultIFS='
+ '
+ IFS="${IFS-$defaultIFS}"
+
+ oIFS=$IFS
+ # Some sh's can't handle IFS=/ for some reason.
+ IFS='%'
+ set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
+ IFS=$oIFS
+
+ pathcomp=
+
+ while test $# -ne 0 ; do
+ pathcomp=$pathcomp$1
+ shift
+ if test ! -d "$pathcomp"; then
+ $mkdirprog "$pathcomp" || lasterr=$?
+ # mkdir can fail with a `File exist' error in case several
+ # install-sh are creating the directory concurrently. This
+ # is OK.
+ test ! -d "$pathcomp" && { (exit ${lasterr-1}); exit; }
+ fi
+ pathcomp=$pathcomp/
+ done
+ fi
+
+ if test -n "$dir_arg"; then
+ $doit $instcmd "$dst" \
+ && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
+ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
+ && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
+ && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
+
+ else
+ # If we're going to rename the final executable, determine the name now.
+ if test -z "$transformarg"; then
+ dstfile=`basename "$dst"`
+ else
+ dstfile=`basename "$dst" $transformbasename \
+ | sed $transformarg`$transformbasename
+ fi
+
+ # don't allow the sed command to completely eliminate the filename.
+ test -z "$dstfile" && dstfile=`basename "$dst"`
+
+ # Make a couple of temp file names in the proper directory.
+ dsttmp=$dstdir/_inst.$$_
+ rmtmp=$dstdir/_rm.$$_
+
+ # Trap to clean up those temp files at exit.
+ trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
+ trap '(exit $?); exit' 1 2 13 15
+
+ # Move or copy the file name to the temp name
+ $doit $instcmd "$src" "$dsttmp" &&
+
+ # and set any options; do chmod last to preserve setuid bits.
+ #
+ # If any of these fail, we abort the whole thing. If we want to
+ # ignore errors from any of these, just make sure not to ignore
+ # errors from the above "$doit $instcmd $src $dsttmp" command.
+ #
+ { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
+ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
+ && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
+ && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
+
+ # Now rename the file to the real destination.
+ { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
+ || {
+ # The rename failed, perhaps because mv can't rename something else
+ # to itself, or perhaps because mv is so ancient that it does not
+ # support -f.
+
+ # Now remove or move aside any old file at destination location.
+ # We try this two ways since rm can't unlink itself on some
+ # systems and the destination file might be busy for other
+ # reasons. In this case, the final cleanup might fail but the new
+ # file should still install successfully.
+ {
+ if test -f "$dstdir/$dstfile"; then
+ $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
+ || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
+ || {
+ echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
+ (exit 1); exit
+ }
+ else
+ :
+ fi
+ } &&
+
+ # Now rename the file to the real destination.
+ $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
+ }
+ }
+ fi || { (exit 1); exit; }
+done
+
+# The final little trick to "correctly" pass the exit status to the exit trap.
+{
+ (exit 0); exit
+}
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
projects / yandexfotkisp / blobdiff