2 dpkg-buildpackage: source package is libfile-chdir-perl
3 dpkg-buildpackage: source version is 0.06-2.1
4 dpkg-buildpackage: source changed by Stephen Gran <sgran@debian.org>
5 dpkg-buildpackage: host architecture armel
6 dpkg-buildpackage: source version without epoch 0.06-2.1
9 # Add commands to clean up after the build process here
10 [ ! -f Makefil ] || /scratchbox/tools/bin/make distclean
11 dh_clean build-stamp install-stamp
12 dpkg-source: building libfile-chdir-perl in libfile-chdir-perl_0.06-2.1.tar.gz
13 dpkg-source: building libfile-chdir-perl in libfile-chdir-perl_0.06-2.1.dsc
15 # Add commands to compile the package here
16 /usr/bin/perl Makefile.PL INSTALLDIRS=vendor
17 Writing Makefile for File::chdir
18 /scratchbox/tools/bin/make OPTIMIZE="-Wall -g -O2"
19 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libfile-chdir-perl/libfile-chdir-perl-0.06'
20 Manifying blib/man3/File::chdir.3pm
21 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libfile-chdir-perl/libfile-chdir-perl-0.06'
26 #/scratchbox/tools/bin/make test
27 /scratchbox/tools/bin/make install DESTDIR=/home/maemo/workspace/git/dh-make-perl/dev/arm/libfile-chdir-perl/libfile-chdir-perl-0.06/debian/libfile-chdir-perl PREFIX=/usr
28 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libfile-chdir-perl/libfile-chdir-perl-0.06'
29 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libfile-chdir-perl/libfile-chdir-perl-0.06/debian/libfile-chdir-perl/usr/share/perl5/File/chdir.pm
30 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libfile-chdir-perl/libfile-chdir-perl-0.06/debian/libfile-chdir-perl/usr/share/man/man3/File::chdir.0
31 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libfile-chdir-perl/libfile-chdir-perl-0.06/debian/libfile-chdir-perl/usr/share/man/man3/File::chdir.3pm
32 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libfile-chdir-perl/libfile-chdir-perl-0.06'
33 # As this is a architecture independent package, we are not supposed to install
34 # stuff to /usr/lib. MakeMaker creates the dirs, we delete them from the deb:
35 [ ! -d /home/maemo/workspace/git/dh-make-perl/dev/arm/libfile-chdir-perl/libfile-chdir-perl-0.06/debian/libfile-chdir-perl/usr/lib/perl5 ] || rmdir --ignore-fail-on-non-empty --parents /home/maemo/workspace/git/dh-make-perl/dev/arm/libfile-chdir-perl/libfile-chdir-perl-0.06/debian/libfile-chdir-perl/usr/lib/perl5
40 dh_installchangelogs Changes
50 dpkg-deb: building package `libfile-chdir-perl' in `../libfile-chdir-perl_0.06-2.1_all.deb'.
52 dpkg-buildpackage: full upload; Debian-native package (full source is included)
53 (Reading database ... 34713 files and directories currently installed.)
54 Preparing to replace libfile-chdir-perl 0.06-2.1 (using libfile-chdir-perl_0.06-2.1_all.deb) ...
55 Unpacking replacement libfile-chdir-perl ...
56 Setting up libfile-chdir-perl (0.06-2.1) ...
57 Desired=Unknown/Install/Remove/Purge/Hold
58 | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
59 |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
60 ||/ Name Version Description
61 +++-==================-==============-============================================
62 ii libfile-chdir-perl 0.06-2.1 A more sensible way to change directories
63 libclass-accessor-perl
64 dpkg-buildpackage: source package is libclass-accessor-perl
65 dpkg-buildpackage: source version is 0.31-2
66 dpkg-buildpackage: source changed by gregor herrmann <gregor+debian@comodo.priv.at>
67 dpkg-buildpackage: host architecture armel
68 dpkg-buildpackage: source version without epoch 0.31-2
69 QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null pop -a -R || test $? = 2
70 Removing patch manpage_typo.diff
71 Restoring lib/Class/Accessor.pm
75 rm -rf .pc debian/stamp-patched
78 [ ! -e Makefile ] || /scratchbox/tools/bin/make distclean
79 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-perl/libclass-accessor-perl-0.31'
80 rm -rf ./blib Makefile.aperl blib/arch/auto/Class/Accessor/extralibs.all blib/arch/auto/Class/Accessor/extralibs.ld perlmain.c tmon.out mon.out so_locations pm_to_blib *.o *.a perl.exe perl perl Accessor.bso Accessor.def libAccessor.def Accessor.exp Accessor.x core core.*perl.*.? *perl.core core.[0-9] core.[0-9][0-9] core.[0-9][0-9][0-9] core.[0-9][0-9][0-9][0-9] core.[0-9][0-9][0-9][0-9][0-9]
81 mv Makefile Makefile.old > /dev/null 2>&1
82 rm -rf blib/lib/auto/Class/Accessor blib/arch/auto/Class/Accessor
83 rm -rf Class-Accessor-0.31
84 rm -f blib/lib/Class/Accessor.pm blib/lib/Class/Accessor/Fast.pm blib/lib/Class/Accessor/Faster.pm Makefile.old Makefile
85 /scratchbox/tools/bin/perl.bin "-MExtUtils::Manifest=fullcheck" -e fullcheck
86 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-perl/libclass-accessor-perl-0.31'
87 dh_clean build-stamp configure-stamp
88 dpkg-source: building libclass-accessor-perl using existing libclass-accessor-perl_0.31.orig.tar.gz
89 dpkg-source: building libclass-accessor-perl in libclass-accessor-perl_0.31-2.diff.gz
90 dpkg-source: building libclass-accessor-perl in libclass-accessor-perl_0.31-2.dsc
91 # quilt exits with 2 as return when there was nothing to do.
92 # That's not an error here (but it's usefull to break loops in crude scripts)
93 QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null push -a || test $? = 2
94 Applying patch manpage_typo.diff
95 patching file lib/Class/Accessor.pm
98 Now at patch manpage_typo.diff
99 touch debian/stamp-patched
101 perl Makefile.PL verbose INSTALLDIRS=vendor
102 Checking if your kit is complete...
104 AUTHOR => q[Marty Pauley <marty+perl@kasei.com>]
105 INSTALLDIRS => q[vendor]
106 NAME => q[Class::Accessor]
107 PREREQ_PM => { base=>q[1.01] }
108 VERSION_FROM => q[lib/Class/Accessor.pm]
109 Using PERL=/targets/FREMANTLE_ARMEL/usr/bin/perl
110 Writing Makefile for Class::Accessor
111 touch configure-stamp
113 /scratchbox/tools/bin/make
114 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-perl/libclass-accessor-perl-0.31'
115 cp lib/Class/Accessor/Fast.pm blib/lib/Class/Accessor/Fast.pm
116 cp lib/Class/Accessor/Faster.pm blib/lib/Class/Accessor/Faster.pm
117 cp lib/Class/Accessor.pm blib/lib/Class/Accessor.pm
118 Manifying blib/man3/Class::Accessor::Faster.3pm
119 Manifying blib/man3/Class::Accessor::Fast.3pm
120 Manifying blib/man3/Class::Accessor.3pm
121 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-perl/libclass-accessor-perl-0.31'
122 /scratchbox/tools/bin/make test
123 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-perl/libclass-accessor-perl-0.31'
124 PERL_DL_NONLAZY=1 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
130 All tests successful.
131 Files=5, Tests=119, 3 wallclock secs ( 3.37 cusr + 0.14 csys = 3.51 CPU)
132 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-perl/libclass-accessor-perl-0.31'
138 /scratchbox/tools/bin/make install PREFIX=/home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-perl/libclass-accessor-perl-0.31/debian/libclass-accessor-perl/usr
139 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-perl/libclass-accessor-perl-0.31'
140 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-perl/libclass-accessor-perl-0.31/debian/libclass-accessor-perl/usr/share/perl5/Class/Accessor.pm
141 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-perl/libclass-accessor-perl-0.31/debian/libclass-accessor-perl/usr/share/perl5/Class/Accessor/Fast.pm
142 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-perl/libclass-accessor-perl-0.31/debian/libclass-accessor-perl/usr/share/perl5/Class/Accessor/Faster.pm
143 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-perl/libclass-accessor-perl-0.31/debian/libclass-accessor-perl/usr/share/man/man3/Class::Accessor.3pm
144 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-perl/libclass-accessor-perl-0.31/debian/libclass-accessor-perl/usr/share/man/man3/Class::Accessor::Faster.3pm
145 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-perl/libclass-accessor-perl-0.31/debian/libclass-accessor-perl/usr/share/man/man3/Class::Accessor::Fast.3pm
146 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-perl/libclass-accessor-perl-0.31'
147 # Remove any empty directories
148 find /home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-perl/libclass-accessor-perl-0.31/debian/libclass-accessor-perl/usr -type d -empty -print0 | xargs --null --no-run-if-empty rmdir -p --ignore-fail-on-non-empty
152 dh_installdocs README
154 dh_installchangelogs Changes
155 dh_installexamples examples/*
162 dpkg-deb: building package `libclass-accessor-perl' in `../libclass-accessor-perl_0.31-2_all.deb'.
164 dpkg-buildpackage: binary and diff upload (original source NOT included)
165 (Reading database ... 34713 files and directories currently installed.)
166 Preparing to replace libclass-accessor-perl 0.31-2 (using libclass-accessor-perl_0.31-2_all.deb) ...
167 Unpacking replacement libclass-accessor-perl ...
168 Setting up libclass-accessor-perl (0.31-2) ...
169 Desired=Unknown/Install/Remove/Purge/Hold
170 | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
171 |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
172 ||/ Name Version Description
173 +++-======================-==============-============================================
174 ii libclass-accessor-perl 0.31-2 Automated accessor generator
175 libclass-accessor-chained-perl
176 dpkg-buildpackage: source package is libclass-accessor-chained-perl
177 dpkg-buildpackage: source version is 0.01.1~debian-2.1
178 dpkg-buildpackage: source changed by Stephen Gran <sgran@debian.org>
179 dpkg-buildpackage: host architecture armel
180 dpkg-buildpackage: source version without epoch 0.01.1~debian-2.1
183 # Add commands to clean up after the build process here
184 [ ! -f Makefile ] || /scratchbox/tools/bin/make distclean
185 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-chained-perl/libclass-accessor-chained-perl-0.01.1~debian'
186 rm -rf ./blib Makefile.aperl blib/arch/auto/Class/Accessor/Chained/extralibs.all blib/arch/auto/Class/Accessor/Chained/extralibs.ld perlmain.c tmon.out mon.out so_locations pm_to_blib *.o *.a perl.exe perl perl Chained.bso Chained.def libChained.def Chained.exp Chained.x core core.*perl.*.? *perl.core core.[0-9] core.[0-9][0-9] core.[0-9][0-9][0-9] core.[0-9][0-9][0-9][0-9] core.[0-9][0-9][0-9][0-9][0-9]
187 mv Makefile Makefile.old > /dev/null 2>&1
188 rm -rf blib/lib/auto/Class/Accessor/Chained blib/arch/auto/Class/Accessor/Chained
189 rm -rf Class-Accessor-Chained-0.01
190 rm -f blib/lib/Class/Accessor/Chained.pm blib/lib/Class/Accessor/Chained/Fast.pm Makefile.old Makefile
191 /scratchbox/tools/bin/perl.bin "-MExtUtils::Manifest=fullcheck" -e fullcheck
192 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-chained-perl/libclass-accessor-chained-perl-0.01.1~debian'
193 dh_clean build-stamp install-stamp
194 dpkg-source: building libclass-accessor-chained-perl using existing libclass-accessor-chained-perl_0.01.1~debian.orig.tar.gz
195 dpkg-source: building libclass-accessor-chained-perl in libclass-accessor-chained-perl_0.01.1~debian-2.1.diff.gz
196 dpkg-source: building libclass-accessor-chained-perl in libclass-accessor-chained-perl_0.01.1~debian-2.1.dsc
198 # Add commands to compile the package here
199 /usr/bin/perl Makefile.PL INSTALLDIRS=vendor
200 Checking if your kit is complete...
202 Writing Makefile for Class::Accessor::Chained
203 /scratchbox/tools/bin/make OPTIMIZE="-Wall -g -O2"
204 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-chained-perl/libclass-accessor-chained-perl-0.01.1~debian'
205 cp lib/Class/Accessor/Chained/Fast.pm blib/lib/Class/Accessor/Chained/Fast.pm
206 cp lib/Class/Accessor/Chained.pm blib/lib/Class/Accessor/Chained.pm
207 Manifying blib/man3/Class::Accessor::Chained::Fast.3pm
208 Manifying blib/man3/Class::Accessor::Chained.3pm
209 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-chained-perl/libclass-accessor-chained-perl-0.01.1~debian'
214 #/scratchbox/tools/bin/make test
215 /scratchbox/tools/bin/make install DESTDIR=/home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-chained-perl/libclass-accessor-chained-perl-0.01.1~debian/debian/libclass-accessor-chained-perl PREFIX=/usr
216 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-chained-perl/libclass-accessor-chained-perl-0.01.1~debian'
217 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-chained-perl/libclass-accessor-chained-perl-0.01.1~debian/debian/libclass-accessor-chained-perl/usr/share/perl5/Class/Accessor/Chained.pm
218 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-chained-perl/libclass-accessor-chained-perl-0.01.1~debian/debian/libclass-accessor-chained-perl/usr/share/perl5/Class/Accessor/Chained/Fast.pm
219 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-chained-perl/libclass-accessor-chained-perl-0.01.1~debian/debian/libclass-accessor-chained-perl/usr/share/man/man3/Class::Accessor::Chained.3pm
220 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-chained-perl/libclass-accessor-chained-perl-0.01.1~debian/debian/libclass-accessor-chained-perl/usr/share/man/man3/Class::Accessor::Chained::Fast.3pm
221 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-chained-perl/libclass-accessor-chained-perl-0.01.1~debian'
222 # As this is a architecture independent package, we are not supposed to install
223 # stuff to /usr/lib. MakeMaker creates the dirs, we delete them from the deb:
224 [ ! -d /home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-chained-perl/libclass-accessor-chained-perl-0.01.1~debian/debian/libclass-accessor-chained-perl/usr/lib/perl5 ] || rmdir --ignore-fail-on-non-empty --parents /home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-chained-perl/libclass-accessor-chained-perl-0.01.1~debian/debian/libclass-accessor-chained-perl/usr/lib/perl5
228 dh_installdocs README
229 dh_installchangelogs Changes
239 dpkg-deb: building package `libclass-accessor-chained-perl' in `../libclass-accessor-chained-perl_0.01.1~debian-2.1_all.deb'.
241 dpkg-buildpackage: binary and diff upload (original source NOT included)
242 (Reading database ... 34713 files and directories currently installed.)
243 Preparing to replace libclass-accessor-chained-perl 0.01.1~debian-2.1 (using libclass-accessor-chained-perl_0.01.1~debian-2.1_all.deb) ...
244 Unpacking replacement libclass-accessor-chained-perl ...
245 Setting up libclass-accessor-chained-perl (0.01.1~debian-2.1) ...
246 Desired=Unknown/Install/Remove/Purge/Hold
247 | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
248 |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
249 ||/ Name Version Description
250 +++-==============================-=================-============================================
251 ii libclass-accessor-chained-perl 0.01.1~debian-2.1 make chained accessors
252 libmodule-depends-perl
253 dpkg-buildpackage: source package is libmodule-depends-perl
254 dpkg-buildpackage: source version is 0.14-1
255 dpkg-buildpackage: source changed by James Bromberger <jeb@debian.org>
256 dpkg-buildpackage: host architecture armel
257 dpkg-buildpackage: source version without epoch 0.14-1
260 # Add commands to clean up after the build process here
261 /scratchbox/tools/bin/make distclean
262 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libmodule-depends-perl/libmodule-depends-perl-0.14'
263 rm -rf ./blib Makefile.aperl blib/arch/auto/Module/Depends/extralibs.all blib/arch/auto/Module/Depends/extralibs.ld perlmain.c tmon.out mon.out so_locations pm_to_blib *.o *.a perl.exe perl perl Depends.bso Depends.def libDepends.def Depends.exp Depends.x core core.*perl.*.? *perl.core core.[0-9] core.[0-9][0-9] core.[0-9][0-9][0-9] core.[0-9][0-9][0-9][0-9] core.[0-9][0-9][0-9][0-9][0-9]
264 mv Makefile Makefile.old > /dev/null 2>&1
265 rm -rf blib/lib/auto/Module/Depends blib/arch/auto/Module/Depends
266 rm -rf Module-Depends-0.14
267 rm -f blib/lib/Module/Depends/Intrusive.pm blib/lib/Module/Depends.pm Makefile.old Makefile
268 /scratchbox/tools/bin/perl.bin "-MExtUtils::Manifest=fullcheck" -e fullcheck
269 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libmodule-depends-perl/libmodule-depends-perl-0.14'
270 dh_clean build-stamp install-stamp
271 dpkg-source: building libmodule-depends-perl using existing libmodule-depends-perl_0.14.orig.tar.gz
272 dpkg-source: building libmodule-depends-perl in libmodule-depends-perl_0.14-1.diff.gz
273 dpkg-source: building libmodule-depends-perl in libmodule-depends-perl_0.14-1.dsc
275 # Add commands to compile the package here
276 /usr/bin/perl Makefile.PL INSTALLDIRS=vendor
277 Checking if your kit is complete...
279 Writing Makefile for Module::Depends
280 /scratchbox/tools/bin/make OPTIMIZE="-Wall -g -O2"
281 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libmodule-depends-perl/libmodule-depends-perl-0.14'
282 cp lib/Module/Depends.pm blib/lib/Module/Depends.pm
283 cp lib/Module/Depends/Intrusive.pm blib/lib/Module/Depends/Intrusive.pm
284 Manifying blib/man3/Module::Depends.3pm
285 Manifying blib/man3/Module::Depends::Intrusive.3pm
286 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libmodule-depends-perl/libmodule-depends-perl-0.14'
291 #/scratchbox/tools/bin/make test
292 /scratchbox/tools/bin/make install DESTDIR=/home/maemo/workspace/git/dh-make-perl/dev/arm/libmodule-depends-perl/libmodule-depends-perl-0.14/debian/libmodule-depends-perl PREFIX=/usr
293 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libmodule-depends-perl/libmodule-depends-perl-0.14'
294 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libmodule-depends-perl/libmodule-depends-perl-0.14/debian/libmodule-depends-perl/usr/share/perl5/Module/Depends.pm
295 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libmodule-depends-perl/libmodule-depends-perl-0.14/debian/libmodule-depends-perl/usr/share/perl5/Module/Depends/Intrusive.pm
296 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libmodule-depends-perl/libmodule-depends-perl-0.14/debian/libmodule-depends-perl/usr/share/man/man3/Module::Depends::Intrusive.3pm
297 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libmodule-depends-perl/libmodule-depends-perl-0.14/debian/libmodule-depends-perl/usr/share/man/man3/Module::Depends.3pm
298 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libmodule-depends-perl/libmodule-depends-perl-0.14'
299 # As this is a architecture independent package, we are not supposed to install
300 # stuff to /usr/lib. MakeMaker creates the dirs, we delete them from the deb:
301 #rmdir --ignore-fail-on-non-empty --parents /home/maemo/workspace/git/dh-make-perl/dev/arm/libmodule-depends-perl/libmodule-depends-perl-0.14/debian/libmodule-depends-perl/usr/lib/perl5
305 dh_installdocs README
306 dh_installchangelogs Changes
316 dpkg-deb: building package `libmodule-depends-perl' in `../libmodule-depends-perl_0.14-1_all.deb'.
318 dpkg-buildpackage: full upload (original source is included)
319 (Reading database ... 34713 files and directories currently installed.)
320 Preparing to replace libmodule-depends-perl 0.14-1 (using libmodule-depends-perl_0.14-1_all.deb) ...
321 Unpacking replacement libmodule-depends-perl ...
322 Setting up libmodule-depends-perl (0.14-1) ...
323 Desired=Unknown/Install/Remove/Purge/Hold
324 | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
325 |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
326 ||/ Name Version Description
327 +++-======================-==============-============================================
328 ii libmodule-depends-perl 0.14-1 identify the dependencies of a distribution
330 dpkg-buildpackage: source package is libpod-escapes-perl
331 dpkg-buildpackage: source version is 1.04-1
332 dpkg-buildpackage: source changed by Jay Bonci <jaybonci@debian.org>
333 dpkg-buildpackage: host architecture armel
334 dpkg-buildpackage: source version without epoch 1.04-1
337 /scratchbox/tools/bin/make clean
338 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-escapes-perl/libpod-escapes-perl-1.04'
339 rm -rf ./blib Makefile.aperl blib/arch/auto/Pod/Escapes/extralibs.all blib/arch/auto/Pod/Escapes/extralibs.ld perlmain.c tmon.out mon.out so_locations pm_to_blib *.o *.a perl.exe perl perl Escapes.bso Escapes.def libEscapes.def Escapes.exp Escapes.x core core.*perl.*.? *perl.core core.[0-9] core.[0-9][0-9] core.[0-9][0-9][0-9] core.[0-9][0-9][0-9][0-9] core.[0-9][0-9][0-9][0-9][0-9]
340 mv Makefile Makefile.old > /dev/null 2>&1
341 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-escapes-perl/libpod-escapes-perl-1.04'
344 dpkg-source: building libpod-escapes-perl using existing libpod-escapes-perl_1.04.orig.tar.gz
345 dpkg-source: building libpod-escapes-perl in libpod-escapes-perl_1.04-1.diff.gz
346 dpkg-source: building libpod-escapes-perl in libpod-escapes-perl_1.04-1.dsc
348 # Add here commands to compile the package.
349 perl Makefile.PL verbose INSTALLDIRS=vendor
350 Checking if your kit is complete...
352 INSTALLDIRS => q[vendor]
353 NAME => q[Pod::Escapes]
355 VERSION_FROM => q[lib/Pod/Escapes.pm]
356 dist => { COMPRESS=>q[gzip -6f], SUFFIX=>q[gz] }
357 Using PERL=/targets/FREMANTLE_ARMEL/usr/bin/perl
358 Writing Makefile for Pod::Escapes
360 # Add here commands to compile the package.
361 perl Makefile.PL verbose INSTALLDIRS=vendor
362 INSTALLDIRS => q[vendor]
363 NAME => q[Pod::Escapes]
365 VERSION_FROM => q[lib/Pod/Escapes.pm]
366 dist => { COMPRESS=>q[gzip -6f], SUFFIX=>q[gz] }
367 Using PERL=/targets/FREMANTLE_ARMEL/usr/bin/perl
368 Writing Makefile for Pod::Escapes
373 /scratchbox/tools/bin/make PREFIX=/home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-escapes-perl/libpod-escapes-perl-1.04/debian/`pwd | sed -e "s/.*\/\\(.*\\)-.*/\\1/"`/usr OPTIMIZE="-O2 -g -Wall" test install
374 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-escapes-perl/libpod-escapes-perl-1.04'
375 cp lib/Pod/Escapes.pm blib/lib/Pod/Escapes.pm
376 PERL_DL_NONLAZY=1 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
377 t/01_about_verbose....ok
378 t/10_main.............ok
379 t/15_name2charnum.....ok
380 All tests successful.
381 Files=3, Tests=106, 1 wallclock secs ( 1.06 cusr + 0.05 csys = 1.11 CPU)
382 Manifying blib/man3/Pod::Escapes.3pm
383 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-escapes-perl/libpod-escapes-perl-1.04/debian/libpod-escapes-perl/usr/share/perl5/Pod/Escapes.pm
384 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-escapes-perl/libpod-escapes-perl-1.04/debian/libpod-escapes-perl/usr/share/man/man3/Pod::Escapes.3pm
385 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-escapes-perl/libpod-escapes-perl-1.04'
386 find /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-escapes-perl/libpod-escapes-perl-1.04/debian -type d | xargs rmdir -p --ignore-fail-on-non-empty
391 dh_installchangelogs ChangeLog
401 dpkg-deb: building package `libpod-escapes-perl' in `../libpod-escapes-perl_1.04-1_all.deb'.
403 dpkg-buildpackage: full upload (original source is included)
404 (Reading database ... 34713 files and directories currently installed.)
405 Preparing to replace libpod-escapes-perl 1.04-1 (using libpod-escapes-perl_1.04-1_all.deb) ...
406 Unpacking replacement libpod-escapes-perl ...
407 Setting up libpod-escapes-perl (1.04-1) ...
408 Desired=Unknown/Install/Remove/Purge/Hold
409 | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
410 |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
411 ||/ Name Version Description
412 +++-===================-==============-=========================================================
413 ii libpod-escapes-perl 1.04-1 CPAN's Pod::Escapes -- for resolving Pod E<...> sequences
415 dpkg-buildpackage: source package is libpod-simple-perl
416 dpkg-buildpackage: source version is 3.07-1
417 dpkg-buildpackage: source changed by Damyan Ivanov <dmn@debian.org>
418 dpkg-buildpackage: host architecture armel
419 dpkg-buildpackage: source version without epoch 3.07-1
424 dpkg-source: building libpod-simple-perl in libpod-simple-perl_3.07-1.tar.gz
425 dpkg-source: building libpod-simple-perl in libpod-simple-perl_3.07-1.dsc
429 Checking if your kit is complete...
431 'CREATE_PACKLIST' is not a known MakeMaker parameter name.
432 Writing Makefile for Pod::Simple
434 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07'
435 cp lib/Pod/Simple/LinkSection.pm blib/lib/Pod/Simple/LinkSection.pm
436 cp lib/Pod/Simple/DumpAsText.pm blib/lib/Pod/Simple/DumpAsText.pm
437 cp lib/Pod/Simple/Progress.pm blib/lib/Pod/Simple/Progress.pm
438 cp lib/Pod/Simple/XMLOutStream.pm blib/lib/Pod/Simple/XMLOutStream.pm
439 cp lib/Pod/Simple/TextContent.pm blib/lib/Pod/Simple/TextContent.pm
440 cp lib/Pod/Simple/Text.pm blib/lib/Pod/Simple/Text.pm
441 cp lib/Pod/Simple/TranscodeSmart.pm blib/lib/Pod/Simple/TranscodeSmart.pm
442 cp lib/Pod/Simple/Search.pm blib/lib/Pod/Simple/Search.pm
443 cp lib/Pod/Simple/PullParserStartToken.pm blib/lib/Pod/Simple/PullParserStartToken.pm
444 cp lib/Pod/Simple/Debug.pm blib/lib/Pod/Simple/Debug.pm
445 cp lib/perlpodspec.pod blib/lib/perlpodspec.pod
446 cp lib/Pod/Simple/Methody.pm blib/lib/Pod/Simple/Methody.pm
447 cp lib/Pod/Simple/PullParserTextToken.pm blib/lib/Pod/Simple/PullParserTextToken.pm
448 cp lib/Pod/Simple/PullParserEndToken.pm blib/lib/Pod/Simple/PullParserEndToken.pm
449 cp lib/Pod/Simple.pm blib/lib/Pod/Simple.pm
450 cp lib/Pod/Simple/HTMLBatch.pm blib/lib/Pod/Simple/HTMLBatch.pm
451 cp lib/Pod/Simple/TranscodeDumb.pm blib/lib/Pod/Simple/TranscodeDumb.pm
452 cp lib/Pod/Simple/RTF.pm blib/lib/Pod/Simple/RTF.pm
453 cp lib/Pod/Simple/Checker.pm blib/lib/Pod/Simple/Checker.pm
454 cp lib/Pod/Simple/PullParser.pm blib/lib/Pod/Simple/PullParser.pm
455 cp lib/Pod/Simple/PullParserToken.pm blib/lib/Pod/Simple/PullParserToken.pm
456 cp lib/Pod/Simple/SimpleTree.pm blib/lib/Pod/Simple/SimpleTree.pm
457 cp lib/perlpod.pod blib/lib/perlpod.pod
458 cp lib/Pod/Simple/TiedOutFH.pm blib/lib/Pod/Simple/TiedOutFH.pm
459 cp lib/Pod/Simple/XHTML.pm blib/lib/Pod/Simple/XHTML.pm
460 cp lib/Pod/Simple/HTML.pm blib/lib/Pod/Simple/HTML.pm
461 cp lib/Pod/Simple.pod blib/lib/Pod/Simple.pod
462 cp lib/Pod/Simple/Subclassing.pod blib/lib/Pod/Simple/Subclassing.pod
463 cp lib/Pod/Simple/BlackBox.pm blib/lib/Pod/Simple/BlackBox.pm
464 cp lib/Pod/Simple/DumpAsXML.pm blib/lib/Pod/Simple/DumpAsXML.pm
465 cp lib/Pod/Simple/HTMLLegacy.pm blib/lib/Pod/Simple/HTMLLegacy.pm
466 cp lib/Pod/Simple/Transcode.pm blib/lib/Pod/Simple/Transcode.pm
467 Manifying blib/man3/Pod::Simple::DumpAsText.3pm
468 Manifying blib/man3/Pod::Simple::LinkSection.3pm
469 Manifying blib/man3/Pod::Simple::XMLOutStream.3pm
470 Manifying blib/man3/Pod::Simple::TextContent.3pm
471 Manifying blib/man3/Pod::Simple::Search.3pm
472 Manifying blib/man3/Pod::Simple::Text.3pm
473 Manifying blib/man3/Pod::Simple::Debug.3pm
474 Manifying blib/man3/Pod::Simple::PullParserStartToken.3pm
475 Manifying blib/man3/perlpodspec.3pm
476 Manifying blib/man3/Pod::Simple::Methody.3pm
477 Manifying blib/man3/Pod::Simple::PullParserEndToken.3pm
478 Manifying blib/man3/Pod::Simple::PullParserTextToken.3pm
479 Manifying blib/man3/Pod::Simple::HTMLBatch.3pm
480 Manifying blib/man3/Pod::Simple::RTF.3pm
481 Manifying blib/man3/Pod::Simple::Checker.3pm
482 Manifying blib/man3/Pod::Simple::PullParser.3pm
483 Manifying blib/man3/Pod::Simple::SimpleTree.3pm
484 Manifying blib/man3/Pod::Simple::PullParserToken.3pm
485 Manifying blib/man3/Pod::Simple::XHTML.3pm
486 Manifying blib/man3/perlpod.3pm
487 Manifying blib/man3/Pod::Simple::HTML.3pm
488 Manifying blib/man3/Pod::Simple::Subclassing.3pm
489 Manifying blib/man3/Pod::Simple.3pm
490 Manifying blib/man3/Pod::Simple::DumpAsXML.3pm
491 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07'
493 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07'
494 PERL_DL_NONLAZY=1 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
541 3/8 skipped: various reasons
548 1/26 skipped: HTML::Entities not installed
550 All tests successful, 4 subtests skipped.
551 Files=53, Tests=1095, 71 wallclock secs (64.86 cusr + 1.96 csys = 66.82 CPU)
552 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07'
559 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07'
560 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/perlpod.pod
561 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/perlpodspec.pod
562 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple.pm
563 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple.pod
564 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/HTMLLegacy.pm
565 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/DumpAsText.pm
566 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/RTF.pm
567 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/Subclassing.pod
568 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/TiedOutFH.pm
569 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/Methody.pm
570 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/PullParserToken.pm
571 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/XHTML.pm
572 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/PullParserEndToken.pm
573 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/XMLOutStream.pm
574 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/TranscodeDumb.pm
575 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/PullParserStartToken.pm
576 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/BlackBox.pm
577 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/PullParser.pm
578 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/SimpleTree.pm
579 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/DumpAsXML.pm
580 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/Transcode.pm
581 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/HTML.pm
582 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/Checker.pm
583 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/HTMLBatch.pm
584 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/LinkSection.pm
585 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/TextContent.pm
586 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/TranscodeSmart.pm
587 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/Search.pm
588 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/Text.pm
589 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/Debug.pm
590 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/Progress.pm
591 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/PullParserTextToken.pm
592 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/man/man3/Pod::Simple.3pm
593 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/man/man3/Pod::Simple::HTMLBatch.3pm
594 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/man/man3/Pod::Simple::PullParserStartToken.3pm
595 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/man/man3/Pod::Simple::Debug.3pm
596 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/man/man3/Pod::Simple::PullParserToken.3pm
597 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/man/man3/Pod::Simple::RTF.3pm
598 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/man/man3/Pod::Simple::Text.3pm
599 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/man/man3/Pod::Simple::PullParser.3pm
600 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/man/man3/Pod::Simple::TextContent.3pm
601 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/man/man3/Pod::Simple::DumpAsText.3pm
602 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/man/man3/Pod::Simple::Subclassing.3pm
603 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/man/man3/Pod::Simple::HTML.3pm
604 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/man/man3/Pod::Simple::Checker.3pm
605 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/man/man3/Pod::Simple::Search.3pm
606 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/man/man3/Pod::Simple::PullParserEndToken.3pm
607 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/man/man3/Pod::Simple::XHTML.3pm
608 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/man/man3/Pod::Simple::Methody.3pm
609 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/man/man3/Pod::Simple::DumpAsXML.3pm
610 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/man/man3/Pod::Simple::SimpleTree.3pm
611 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/man/man3/Pod::Simple::PullParserTextToken.3pm
612 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/man/man3/Pod::Simple::LinkSection.3pm
613 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/man/man3/perlpod.3pm
614 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/man/man3/perlpodspec.3pm
615 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/man/man3/Pod::Simple::XMLOutStream.3pm
616 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07'
648 rm -v debian/libpod-simple-perl/usr/share/perl5/perlpod*.pod \
649 debian/libpod-simple-perl/usr/share/man/man3/perlpod*.3pm.gz
650 removed `debian/libpod-simple-perl/usr/share/perl5/perlpod.pod'
651 removed `debian/libpod-simple-perl/usr/share/perl5/perlpodspec.pod'
652 removed `debian/libpod-simple-perl/usr/share/man/man3/perlpod.3pm.gz'
653 removed `debian/libpod-simple-perl/usr/share/man/man3/perlpodspec.3pm.gz'
662 dpkg-deb: building package `libpod-simple-perl' in `../libpod-simple-perl_3.07-1_all.deb'.
664 dpkg-buildpackage: full upload; Debian-native package (full source is included)
665 Selecting previously deselected package libpod-simple-perl.
666 (Reading database ... 34713 files and directories currently installed.)
667 Unpacking libpod-simple-perl (from libpod-simple-perl_3.07-1_all.deb) ...
668 Setting up libpod-simple-perl (3.07-1) ...
669 Desired=Unknown/Install/Remove/Purge/Hold
670 | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
671 |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
672 ||/ Name Version Description
673 +++-==================-==============-=======================================================
674 ii libpod-simple-perl 3.07-1 Perl framework for parsing files in Pod markup language
677 dpkg-buildpackage: source package is libtest-simple-perl
678 dpkg-buildpackage: source version is 0.80-1
679 dpkg-buildpackage: source changed by Damyan Ivanov <dmn@debian.org>
680 dpkg-buildpackage: host architecture armel
681 dpkg-buildpackage: source version without epoch 0.80-1
686 dpkg-source: building libtest-simple-perl using existing libtest-simple-perl_0.80.orig.tar.gz
687 dpkg-source: building libtest-simple-perl in libtest-simple-perl_0.80-1.diff.gz
688 dpkg-source: building libtest-simple-perl in libtest-simple-perl_0.80-1.dsc
693 NOTE: There have been API changes between this version and any older
694 than version 0.48! Please see the Changes file for details.
697 NOTE: The behavior of Test::More and threads has changed between this
698 version and any older than version 0.48! Please see the Changes file
701 Checking if your kit is complete...
703 'CREATE_PACKLIST' is not a known MakeMaker parameter name.
704 Writing Makefile for Test::Simple
706 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-simple-perl/libtest-simple-perl-0.80'
707 cp lib/Test/Builder/Tester/Color.pm blib/lib/Test/Builder/Tester/Color.pm
708 cp lib/Test/Simple.pm blib/lib/Test/Simple.pm
709 cp lib/Test/Builder.pm blib/lib/Test/Builder.pm
710 cp lib/Test/More.pm blib/lib/Test/More.pm
711 cp lib/Test/Builder/Tester.pm blib/lib/Test/Builder/Tester.pm
712 cp lib/Test/Builder/Module.pm blib/lib/Test/Builder/Module.pm
713 cp lib/Test/Tutorial.pod blib/lib/Test/Tutorial.pod
714 Manifying blib/man3/Test::Builder::Tester::Color.3pm
715 Manifying blib/man3/Test::Builder.3pm
716 Manifying blib/man3/Test::Simple.3pm
717 Manifying blib/man3/Test::More.3pm
718 Manifying blib/man3/Test::Builder::Module.3pm
719 Manifying blib/man3/Test::Builder::Tester.3pm
720 Manifying blib/man3/Test::Tutorial.3pm
721 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-simple-perl/libtest-simple-perl-0.80'
723 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-simple-perl/libtest-simple-perl-0.80'
724 PERL_DL_NONLAZY=1 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
725 t/00test_harness_check..........ok
726 t/bad_plan......................ok
727 t/bail_out......................ok
728 t/BEGIN_require_ok..............ok
729 t/BEGIN_use_ok..................ok
730 t/buffer........................ok
731 t/Builder.......................ok
732 t/carp..........................ok
733 t/circular_data.................ok
734 t/cmp_ok........................ok
735 t/create........................ok
736 t/curr_test.....................ok
737 t/details.......................ok
738 t/diag..........................ok
739 t/dont_overwrite_die_handler....ok
740 t/eq_set........................ok
741 t/exit..........................ok
742 t/extra.........................ok
743 t/extra_one.....................ok
744 t/fail-like.....................ok
745 t/fail-more.....................ok
746 t/fail..........................ok
747 t/fail_one......................ok
748 t/filehandles...................ok
749 t/fork..........................ok
750 t/harness_active................ok
751 t/has_plan......................ok
752 t/has_plan2.....................ok
753 t/import........................ok
754 t/is_deeply_dne_bug.............ok
755 t/is_deeply_fail................ok
756 t/is_deeply_with_threads........skipped
757 all skipped: many perls have broken threads. Enable with AUTHOR_TESTING.
758 t/is_fh.........................ok
759 t/maybe_regex...................ok
760 3/16 skipped: blessed regex checker added in 5.10
761 t/missing.......................ok
762 t/More..........................ok
763 t/no_diag.......................ok
764 t/no_ending.....................ok
765 t/no_header.....................ok
766 t/no_plan.......................ok
767 t/ok_obj........................ok
768 t/output........................ok
769 t/overload......................ok
770 t/overload_threads..............ok
771 1/5 skipped: not really skipped, testing overloaded reason
772 t/plan..........................ok
773 t/plan_bad......................ok
774 t/plan_is_noplan................ok
775 t/plan_no_plan..................ok
776 1/6 skipped: Just testing skip with no_plan
777 t/plan_shouldnt_import..........ok
778 t/plan_skip_all.................skipped
779 all skipped: Just testing plan & skip_all
780 t/pod-coverage..................skipped
781 all skipped: Test::Pod::Coverage 1.08 required for testing POD coverage
782 t/pod...........................skipped
783 all skipped: Test::Pod 1.00 required for testing POD
784 t/require_ok....................ok
785 t/reset.........................ok
786 t/simple........................ok
787 t/skip..........................ok
788 8/17 skipped: various reasons
789 t/skipall.......................ok
790 t/tbm_doesnt_set_exported_to....ok
791 t/tbt_01basic...................ok
792 t/tbt_02fhrestore...............ok
793 t/tbt_03die.....................ok
794 t/tbt_04line_num................ok
795 t/tbt_05faildiag................ok
796 t/tbt_06errormess...............ok
797 t/tbt_07args....................ok
798 t/thread_taint..................ok
799 t/threads.......................ok
800 t/todo..........................ok
801 t/try...........................ok
802 t/undef.........................ok
803 t/use_ok........................ok
804 t/useing........................ok
805 t/utf8..........................skipped
806 all skipped: Not yet implemented
807 All tests successful, 5 tests and 13 subtests skipped.
808 Files=73, Tests=521, 47 wallclock secs (41.52 cusr + 2.24 csys = 43.76 CPU)
809 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-simple-perl/libtest-simple-perl-0.80'
815 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-simple-perl/libtest-simple-perl-0.80'
816 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-simple-perl/libtest-simple-perl-0.80/debian/libtest-simple-perl/usr/share/perl5/Test/Simple.pm
817 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-simple-perl/libtest-simple-perl-0.80/debian/libtest-simple-perl/usr/share/perl5/Test/More.pm
818 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-simple-perl/libtest-simple-perl-0.80/debian/libtest-simple-perl/usr/share/perl5/Test/Tutorial.pod
819 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-simple-perl/libtest-simple-perl-0.80/debian/libtest-simple-perl/usr/share/perl5/Test/Builder.pm
820 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-simple-perl/libtest-simple-perl-0.80/debian/libtest-simple-perl/usr/share/perl5/Test/Builder/Tester.pm
821 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-simple-perl/libtest-simple-perl-0.80/debian/libtest-simple-perl/usr/share/perl5/Test/Builder/Module.pm
822 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-simple-perl/libtest-simple-perl-0.80/debian/libtest-simple-perl/usr/share/perl5/Test/Builder/Tester/Color.pm
823 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-simple-perl/libtest-simple-perl-0.80/debian/libtest-simple-perl/usr/share/man/man3/Test::Tutorial.3pm
824 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-simple-perl/libtest-simple-perl-0.80/debian/libtest-simple-perl/usr/share/man/man3/Test::Builder::Tester::Color.3pm
825 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-simple-perl/libtest-simple-perl-0.80/debian/libtest-simple-perl/usr/share/man/man3/Test::Builder.3pm
826 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-simple-perl/libtest-simple-perl-0.80/debian/libtest-simple-perl/usr/share/man/man3/Test::Builder::Module.3pm
827 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-simple-perl/libtest-simple-perl-0.80/debian/libtest-simple-perl/usr/share/man/man3/Test::Simple.3pm
828 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-simple-perl/libtest-simple-perl-0.80/debian/libtest-simple-perl/usr/share/man/man3/Test::More.3pm
829 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-simple-perl/libtest-simple-perl-0.80/debian/libtest-simple-perl/usr/share/man/man3/Test::Builder::Tester.3pm
830 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-simple-perl/libtest-simple-perl-0.80'
869 dpkg-deb: building package `libtest-simple-perl' in `../libtest-simple-perl_0.80-1_all.deb'.
871 dpkg-buildpackage: full upload (original source is included)
872 Selecting previously deselected package libtest-simple-perl.
873 (Reading database ... 34806 files and directories currently installed.)
874 Unpacking libtest-simple-perl (from libtest-simple-perl_0.80-1_all.deb) ...
875 Setting up libtest-simple-perl (0.80-1) ...
876 Desired=Unknown/Install/Remove/Purge/Hold
877 | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
878 |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
879 ||/ Name Version Description
880 +++-===================-==============-============================================
881 ii libtest-simple-perl 0.80-1 Basic utilities for writing tests in Perl
883 dpkg-buildpackage: source package is libtest-pod-perl
884 dpkg-buildpackage: source version is 1.26-2
885 dpkg-buildpackage: source changed by gregor herrmann <gregor+debian@comodo.priv.at>
886 dpkg-buildpackage: host architecture armel
887 dpkg-buildpackage: source version without epoch 1.26-2
890 dh_clean build-stamp install-stamp
891 [ ! -f Makefile ] || /scratchbox/tools/bin/make realclean
892 dpkg-source: building libtest-pod-perl using existing libtest-pod-perl_1.26.orig.tar.gz
893 dpkg-source: building libtest-pod-perl in libtest-pod-perl_1.26-2.diff.gz
894 dpkg-source: building libtest-pod-perl in libtest-pod-perl_1.26-2.dsc
896 /usr/bin/perl Makefile.PL INSTALLDIRS=vendor
897 Checking if your kit is complete...
899 Writing Makefile for Test::Pod
900 /scratchbox/tools/bin/make
901 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-pod-perl/libtest-pod-perl-1.26'
902 cp Pod.pm blib/lib/Test/Pod.pm
903 Manifying blib/man3/Test::Pod.3pm
904 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-pod-perl/libtest-pod-perl-1.26'
905 /scratchbox/tools/bin/make test
906 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-pod-perl/libtest-pod-perl-1.26'
907 PERL_DL_NONLAZY=1 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
908 t/00-load..............ok
909 t/all_pod_files........ok
910 t/cut-outside-block....ok
911 t/good.................ok
912 t/item-ordering........ok
913 t/load.................ok
914 t/missing-file.........ok
915 t/pod..................ok
916 t/selftest.............ok
917 t/spaced-directives....skipped
918 all skipped: Not written yet
919 t/unknown-directive....ok
920 All tests successful, 1 test skipped.
921 Files=11, Tests=19, 11 wallclock secs (10.33 cusr + 0.40 csys = 10.73 CPU)
922 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-pod-perl/libtest-pod-perl-1.26'
927 /scratchbox/tools/bin/make install DESTDIR=/home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-pod-perl/libtest-pod-perl-1.26/debian/libtest-pod-perl PREFIX=/usr
928 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-pod-perl/libtest-pod-perl-1.26'
929 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-pod-perl/libtest-pod-perl-1.26/debian/libtest-pod-perl/usr/share/perl5/Test/Pod.pm
930 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-pod-perl/libtest-pod-perl-1.26/debian/libtest-pod-perl/usr/share/man/man3/Test::Pod.3pm
931 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-pod-perl/libtest-pod-perl-1.26'
932 [ ! -d /home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-pod-perl/libtest-pod-perl-1.26/debian/libtest-pod-perl/usr/lib/perl5 ] || rmdir --ignore-fail-on-non-empty --parents --verbose /home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-pod-perl/libtest-pod-perl-1.26/debian/libtest-pod-perl/usr/lib/perl5
937 dh_installchangelogs Changes
945 dpkg-deb: building package `libtest-pod-perl' in `../libtest-pod-perl_1.26-2_all.deb'.
947 dpkg-buildpackage: binary and diff upload (original source NOT included)
948 Selecting previously deselected package libtest-pod-perl.
949 (Reading database ... 34827 files and directories currently installed.)
950 Unpacking libtest-pod-perl (from libtest-pod-perl_1.26-2_all.deb) ...
951 Setting up libtest-pod-perl (1.26-2) ...
952 Desired=Unknown/Install/Remove/Purge/Hold
953 | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
954 |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
955 ||/ Name Version Description
956 +++-================-==============-============================================
957 ii libtest-pod-perl 1.26-2 Test::Pod - check for POD errors in files
958 libextutils-cbuilder-perl
959 dpkg-buildpackage: source package is libextutils-cbuilder-perl
960 dpkg-buildpackage: source version is 0.23-1
961 dpkg-buildpackage: source changed by Damyan Ivanov <dmn@debian.org>
962 dpkg-buildpackage: host architecture armel
963 dpkg-buildpackage: source version without epoch 0.23-1
964 QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null pop -a -R || test $? = 2
965 Removing patch 10_fix-gnukfreebsd-hurd.patch
966 Restoring lib/ExtUtils/CBuilder.pm
969 rm -rf .pc debian/stamp-patched
974 dpkg-source: building libextutils-cbuilder-perl using existing libextutils-cbuilder-perl_0.23.orig.tar.gz
975 dpkg-source: building libextutils-cbuilder-perl in libextutils-cbuilder-perl_0.23-1.diff.gz
976 dpkg-source: building libextutils-cbuilder-perl in libextutils-cbuilder-perl_0.23-1.dsc
977 # quilt exits with 2 as return when there was nothing to do.
978 # That's not an error here (but it's usefull to break loops in crude scripts)
979 QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null push -a || test $? = 2
980 Applying patch 10_fix-gnukfreebsd-hurd.patch
981 patching file lib/ExtUtils/CBuilder.pm
983 Now at patch 10_fix-gnukfreebsd-hurd.patch
984 touch debian/stamp-patched
988 Checking if your kit is complete...
990 'CREATE_PACKLIST' is not a known MakeMaker parameter name.
991 Writing Makefile for ExtUtils::CBuilder
993 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libextutils-cbuilder-perl/libextutils-cbuilder-perl-0.23'
994 cp lib/ExtUtils/CBuilder.pm blib/lib/ExtUtils/CBuilder.pm
995 cp lib/ExtUtils/CBuilder/Platform/Windows.pm blib/lib/ExtUtils/CBuilder/Platform/Windows.pm
996 cp lib/ExtUtils/CBuilder/Platform/aix.pm blib/lib/ExtUtils/CBuilder/Platform/aix.pm
997 cp bleadcheck.pl blib/lib/ExtUtils/bleadcheck.pl
998 cp lib/ExtUtils/CBuilder/Platform/cygwin.pm blib/lib/ExtUtils/CBuilder/Platform/cygwin.pm
999 cp lib/ExtUtils/CBuilder/Platform/VMS.pm blib/lib/ExtUtils/CBuilder/Platform/VMS.pm
1000 cp lib/ExtUtils/CBuilder/Platform/Unix.pm blib/lib/ExtUtils/CBuilder/Platform/Unix.pm
1001 cp lib/ExtUtils/CBuilder/Platform/darwin.pm blib/lib/ExtUtils/CBuilder/Platform/darwin.pm
1002 cp lib/ExtUtils/CBuilder/Platform/dec_osf.pm blib/lib/ExtUtils/CBuilder/Platform/dec_osf.pm
1003 cp lib/ExtUtils/CBuilder/Platform/os2.pm blib/lib/ExtUtils/CBuilder/Platform/os2.pm
1004 cp lib/ExtUtils/CBuilder/Base.pm blib/lib/ExtUtils/CBuilder/Base.pm
1005 Manifying blib/man3/ExtUtils::CBuilder::Platform::Windows.3pm
1006 Manifying blib/man3/ExtUtils::CBuilder.3pm
1007 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libextutils-cbuilder-perl/libextutils-cbuilder-perl-0.23'
1009 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libextutils-cbuilder-perl/libextutils-cbuilder-perl-0.23'
1010 PERL_DL_NONLAZY=1 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
1013 All tests successful.
1014 Files=2, Tests=16, 4 wallclock secs ( 2.49 cusr + 0.34 csys = 2.83 CPU)
1015 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libextutils-cbuilder-perl/libextutils-cbuilder-perl-0.23'
1021 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libextutils-cbuilder-perl/libextutils-cbuilder-perl-0.23'
1022 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libextutils-cbuilder-perl/libextutils-cbuilder-perl-0.23/debian/libextutils-cbuilder-perl/usr/share/perl5/ExtUtils/bleadcheck.pl
1023 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libextutils-cbuilder-perl/libextutils-cbuilder-perl-0.23/debian/libextutils-cbuilder-perl/usr/share/perl5/ExtUtils/CBuilder.pm
1024 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libextutils-cbuilder-perl/libextutils-cbuilder-perl-0.23/debian/libextutils-cbuilder-perl/usr/share/perl5/ExtUtils/CBuilder/Base.pm
1025 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libextutils-cbuilder-perl/libextutils-cbuilder-perl-0.23/debian/libextutils-cbuilder-perl/usr/share/perl5/ExtUtils/CBuilder/Platform/Unix.pm
1026 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libextutils-cbuilder-perl/libextutils-cbuilder-perl-0.23/debian/libextutils-cbuilder-perl/usr/share/perl5/ExtUtils/CBuilder/Platform/VMS.pm
1027 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libextutils-cbuilder-perl/libextutils-cbuilder-perl-0.23/debian/libextutils-cbuilder-perl/usr/share/perl5/ExtUtils/CBuilder/Platform/cygwin.pm
1028 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libextutils-cbuilder-perl/libextutils-cbuilder-perl-0.23/debian/libextutils-cbuilder-perl/usr/share/perl5/ExtUtils/CBuilder/Platform/aix.pm
1029 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libextutils-cbuilder-perl/libextutils-cbuilder-perl-0.23/debian/libextutils-cbuilder-perl/usr/share/perl5/ExtUtils/CBuilder/Platform/darwin.pm
1030 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libextutils-cbuilder-perl/libextutils-cbuilder-perl-0.23/debian/libextutils-cbuilder-perl/usr/share/perl5/ExtUtils/CBuilder/Platform/dec_osf.pm
1031 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libextutils-cbuilder-perl/libextutils-cbuilder-perl-0.23/debian/libextutils-cbuilder-perl/usr/share/perl5/ExtUtils/CBuilder/Platform/Windows.pm
1032 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libextutils-cbuilder-perl/libextutils-cbuilder-perl-0.23/debian/libextutils-cbuilder-perl/usr/share/perl5/ExtUtils/CBuilder/Platform/os2.pm
1033 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libextutils-cbuilder-perl/libextutils-cbuilder-perl-0.23/debian/libextutils-cbuilder-perl/usr/share/man/man3/ExtUtils::CBuilder::Platform::Windows.3pm
1034 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libextutils-cbuilder-perl/libextutils-cbuilder-perl-0.23/debian/libextutils-cbuilder-perl/usr/share/man/man3/ExtUtils::CBuilder.3pm
1035 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libextutils-cbuilder-perl/libextutils-cbuilder-perl-0.23'
1038 dh_installchangelogs
1074 dpkg-deb: building package `libextutils-cbuilder-perl' in `../libextutils-cbuilder-perl_0.23-1_all.deb'.
1076 dpkg-buildpackage: full upload (original source is included)
1077 (Reading database ... 34833 files and directories currently installed.)
1078 Preparing to replace libextutils-cbuilder-perl 0.18-1maemo1 (using libextutils-cbuilder-perl_0.23-1_all.deb) ...
1079 Unpacking replacement libextutils-cbuilder-perl ...
1080 Setting up libextutils-cbuilder-perl (0.23-1) ...
1081 Desired=Unknown/Install/Remove/Purge/Hold
1082 | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
1083 |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
1084 ||/ Name Version Description
1085 +++-=========================-==============-============================================
1086 ii libextutils-cbuilder-perl 0.23-1 Compile and link C code for Perl modules
1087 libextutils-parsexs-perl
1088 dpkg-buildpackage: source package is libextutils-parsexs-perl
1089 dpkg-buildpackage: source version is 2.19-1
1090 dpkg-buildpackage: source changed by AGOSTINI Yves <agostini@univ-metz.fr>
1091 dpkg-buildpackage: host architecture armel
1092 dpkg-buildpackage: source version without epoch 2.19-1
1095 dh_clean build-stamp install-stamp
1096 [ ! -f Build ] || /usr/bin/perl Build --allow_mb_mismatch 1 distclean
1097 Desired=Unknown/Install/Remove/Purge/Hold
1098 | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
1099 |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
1100 ||/ Name Version Description
1101 +++-========================-==============-============================================
1102 ii libextutils-parsexs-perl 2.15-2maemo1 convert Perl XS code into C code
1103 libdevel-symdump-perl
1104 dpkg-buildpackage: source package is libdevel-symdump-perl
1105 dpkg-buildpackage: source version is 2.08-1
1106 dpkg-buildpackage: source changed by Colin Watson <cjwatson@debian.org>
1107 dpkg-buildpackage: host architecture armel
1108 dpkg-buildpackage: source version without epoch 2.08-1
1111 [ ! -f Makefile ] || /scratchbox/tools/bin/make distclean
1113 dh_clean build-stamp install-stamp
1114 dpkg-source: building libdevel-symdump-perl using existing libdevel-symdump-perl_2.08.orig.tar.gz
1115 dpkg-source: building libdevel-symdump-perl in libdevel-symdump-perl_2.08-1.diff.gz
1116 dpkg-source: building libdevel-symdump-perl in libdevel-symdump-perl_2.08-1.dsc
1118 /usr/bin/perl Makefile.PL INSTALLDIRS=vendor
1119 Checking if your kit is complete...
1121 Writing Makefile for Devel::Symdump
1122 /scratchbox/tools/bin/make OPTIMIZE="-O2 -g -Wall"
1123 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libdevel-symdump-perl/libdevel-symdump-perl-2.08'
1124 cp lib/Devel/Symdump.pm blib/lib/Devel/Symdump.pm
1125 cp lib/Devel/Symdump/Export.pm blib/lib/Devel/Symdump/Export.pm
1126 Manifying blib/man3/Devel::Symdump.3pm
1127 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libdevel-symdump-perl/libdevel-symdump-perl-2.08'
1133 /scratchbox/tools/bin/make install PREFIX=/home/maemo/workspace/git/dh-make-perl/dev/arm/libdevel-symdump-perl/libdevel-symdump-perl-2.08/debian/libdevel-symdump-perl/usr
1134 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libdevel-symdump-perl/libdevel-symdump-perl-2.08'
1135 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libdevel-symdump-perl/libdevel-symdump-perl-2.08/debian/libdevel-symdump-perl/usr/share/perl5/Devel/Symdump.pm
1136 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libdevel-symdump-perl/libdevel-symdump-perl-2.08/debian/libdevel-symdump-perl/usr/share/perl5/Devel/Symdump/Export.pm
1137 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libdevel-symdump-perl/libdevel-symdump-perl-2.08/debian/libdevel-symdump-perl/usr/share/man/man3/Devel::Symdump.3pm
1138 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libdevel-symdump-perl/libdevel-symdump-perl-2.08'
1139 [ ! -d /home/maemo/workspace/git/dh-make-perl/dev/arm/libdevel-symdump-perl/libdevel-symdump-perl-2.08/debian/libdevel-symdump-perl/usr/lib/perl5 ] || rmdir --ignore-fail-on-non-empty --parents /home/maemo/workspace/git/dh-make-perl/dev/arm/libdevel-symdump-perl/libdevel-symdump-perl-2.08/debian/libdevel-symdump-perl/usr/lib/perl5
1144 dh_installchangelogs ChangeLog
1154 dpkg-deb: building package `libdevel-symdump-perl' in `../libdevel-symdump-perl_2.08-1_all.deb'.
1156 dpkg-buildpackage: full upload (original source is included)
1157 Selecting previously deselected package libdevel-symdump-perl.
1158 (Reading database ... 34835 files and directories currently installed.)
1159 Unpacking libdevel-symdump-perl (from libdevel-symdump-perl_2.08-1_all.deb) ...
1160 Setting up libdevel-symdump-perl (2.08-1) ...
1161 Desired=Unknown/Install/Remove/Purge/Hold
1162 | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
1163 |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
1164 ||/ Name Version Description
1165 +++-=====================-==============-==============================================
1166 ii libdevel-symdump-perl 2.08-1 Perl module for inspecting perl's symbol table
1167 libpod-coverage-perl
1168 dpkg-buildpackage: source package is libpod-coverage-perl
1169 dpkg-buildpackage: source version is 0.19-1
1170 dpkg-buildpackage: source changed by Damyan Ivanov <dmn@debian.org>
1171 dpkg-buildpackage: host architecture armel
1172 dpkg-buildpackage: source version without epoch 0.19-1
1175 dh_clean build-stamp install-stamp
1176 [ ! -f Build ] || /usr/bin/perl Build distclean
1177 libtest-pod-coverage-perl
1178 dpkg-buildpackage: source package is libtest-pod-coverage-perl
1179 dpkg-buildpackage: source version is 1.08-3
1180 dpkg-buildpackage: source changed by gregor herrmann <gregor+debian@comodo.priv.at>
1181 dpkg-buildpackage: host architecture armel
1182 dpkg-buildpackage: source version without epoch 1.08-3
1185 dh_clean build-stamp install-stamp
1186 # Add commands to clean up after the build process here
1187 [ ! -f Makefile ] || /scratchbox/tools/bin/make realclean
1188 dpkg-source: building libtest-pod-coverage-perl using existing libtest-pod-coverage-perl_1.08.orig.tar.gz
1189 dpkg-source: building libtest-pod-coverage-perl in libtest-pod-coverage-perl_1.08-3.diff.gz
1190 dpkg-source: building libtest-pod-coverage-perl in libtest-pod-coverage-perl_1.08-3.dsc
1192 # Add commands to compile the package here
1193 /usr/bin/perl Makefile.PL INSTALLDIRS=vendor
1194 Checking if your kit is complete...
1196 Writing Makefile for Test::Pod::Coverage
1197 /scratchbox/tools/bin/make
1198 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-pod-coverage-perl/libtest-pod-coverage-perl-1.08'
1199 cp Coverage.pm blib/lib/Test/Pod/Coverage.pm
1200 Manifying blib/man3/Test::Pod::Coverage.3pm
1201 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-pod-coverage-perl/libtest-pod-coverage-perl-1.08'
1202 /scratchbox/tools/bin/make test
1203 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-pod-coverage-perl/libtest-pod-coverage-perl-1.08'
1204 PERL_DL_NONLAZY=1 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
1205 t/00.load................ok
1206 t/all_modules............ok
1207 t/all_pod_coverage_ok....ok
1208 t/alt_class..............ok
1209 t/nopod..................ok
1210 t/nosymbols..............ok
1211 t/parms..................ok
1212 t/pod....................ok
1213 t/privates...............ok
1214 t/self...................ok
1215 t/simple.................ok
1216 All tests successful.
1217 Files=11, Tests=23, 14 wallclock secs (12.60 cusr + 0.39 csys = 12.99 CPU)
1218 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-pod-coverage-perl/libtest-pod-coverage-perl-1.08'
1223 # Add commands to install the package into /home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-pod-coverage-perl/libtest-pod-coverage-perl-1.08/debian/libtest-pod-coverage-perl here
1224 /scratchbox/tools/bin/make install DESTDIR=/home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-pod-coverage-perl/libtest-pod-coverage-perl-1.08/debian/libtest-pod-coverage-perl PREFIX=/usr
1225 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-pod-coverage-perl/libtest-pod-coverage-perl-1.08'
1226 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-pod-coverage-perl/libtest-pod-coverage-perl-1.08/debian/libtest-pod-coverage-perl/usr/share/perl5/Test/Pod/Coverage.pm
1227 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-pod-coverage-perl/libtest-pod-coverage-perl-1.08/debian/libtest-pod-coverage-perl/usr/share/man/man3/Test::Pod::Coverage.3pm
1228 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-pod-coverage-perl/libtest-pod-coverage-perl-1.08'
1229 [ ! -d /home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-pod-coverage-perl/libtest-pod-coverage-perl-1.08/debian/libtest-pod-coverage-perl/usr/lib/perl5 ] || rmdir --ignore-fail-on-non-empty --parents --verbose /home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-pod-coverage-perl/libtest-pod-coverage-perl-1.08/debian/libtest-pod-coverage-perl/usr/lib/perl5
1234 dh_installchangelogs Changes
1242 dpkg-deb: building package `libtest-pod-coverage-perl' in `../libtest-pod-coverage-perl_1.08-3_all.deb'.
1244 dpkg-buildpackage: binary and diff upload (original source NOT included)
1245 Selecting previously deselected package libtest-pod-coverage-perl.
1246 (Reading database ... 34862 files and directories currently installed.)
1247 Unpacking libtest-pod-coverage-perl (from libtest-pod-coverage-perl_1.08-3_all.deb) ...
1248 Setting up libtest-pod-coverage-perl (1.08-3) ...
1249 Desired=Unknown/Install/Remove/Purge/Hold
1250 | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
1251 |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
1252 ||/ Name Version Description
1253 +++-=========================-==============-============================================
1254 ii libtest-pod-coverage-perl 1.08-3 Check for pod coverage in your distribution
1256 dpkg-buildpackage: source package is libpar-dist-perl
1257 dpkg-buildpackage: source version is 0.31-1
1258 dpkg-buildpackage: source changed by gregor herrmann <gregoa@debian.org>
1259 dpkg-buildpackage: host architecture armel
1260 dpkg-buildpackage: source version without epoch 0.31-1
1263 dh_clean build-stamp install-stamp
1264 [ ! -f Makefile ] || /scratchbox/tools/bin/make realclean
1265 dpkg-source: building libpar-dist-perl using existing libpar-dist-perl_0.31.orig.tar.gz
1266 dpkg-source: building libpar-dist-perl in libpar-dist-perl_0.31-1.diff.gz
1267 dpkg-source: building libpar-dist-perl in libpar-dist-perl_0.31-1.dsc
1269 /usr/bin/perl Makefile.PL INSTALLDIRS=vendor
1270 Checking if your kit is complete...
1272 Writing Makefile for PAR::Dist
1273 /scratchbox/tools/bin/make
1274 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libpar-dist-perl/libpar-dist-perl-0.31'
1275 cp lib/PAR/Dist.pm blib/lib/PAR/Dist.pm
1276 Manifying blib/man3/PAR::Dist.3pm
1277 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libpar-dist-perl/libpar-dist-perl-0.31'
1278 PERL_TEST_POD=1 /scratchbox/tools/bin/make test
1279 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libpar-dist-perl/libpar-dist-perl-0.31'
1280 PERL_DL_NONLAZY=1 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
1281 t/00pod..............ok
1282 t/00podcover.........ok
1283 t/01basic............ok
1284 t/02parsedistname....ok
1285 All tests successful.
1286 Files=4, Tests=9, 3 wallclock secs ( 3.76 cusr + 0.10 csys = 3.86 CPU)
1287 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libpar-dist-perl/libpar-dist-perl-0.31'
1292 /scratchbox/tools/bin/make install DESTDIR=/home/maemo/workspace/git/dh-make-perl/dev/arm/libpar-dist-perl/libpar-dist-perl-0.31/debian/libpar-dist-perl PREFIX=/usr
1293 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libpar-dist-perl/libpar-dist-perl-0.31'
1294 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpar-dist-perl/libpar-dist-perl-0.31/debian/libpar-dist-perl/usr/share/perl5/PAR/Dist.pm
1295 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpar-dist-perl/libpar-dist-perl-0.31/debian/libpar-dist-perl/usr/share/man/man3/PAR::Dist.3pm
1296 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libpar-dist-perl/libpar-dist-perl-0.31'
1297 [ ! -d /home/maemo/workspace/git/dh-make-perl/dev/arm/libpar-dist-perl/libpar-dist-perl-0.31/debian/libpar-dist-perl/usr/lib/perl5 ] || \
1298 rmdir --ignore-fail-on-non-empty --parents --verbose \
1299 /home/maemo/workspace/git/dh-make-perl/dev/arm/libpar-dist-perl/libpar-dist-perl-0.31/debian/libpar-dist-perl/usr/lib/perl5
1304 dh_installchangelogs Changes
1312 dpkg-deb: building package `libpar-dist-perl' in `../libpar-dist-perl_0.31-1_all.deb'.
1314 dpkg-buildpackage: full upload (original source is included)
1315 Selecting previously deselected package libpar-dist-perl.
1316 (Reading database ... 34869 files and directories currently installed.)
1317 Unpacking libpar-dist-perl (from libpar-dist-perl_0.31-1_all.deb) ...
1318 Setting up libpar-dist-perl (0.31-1) ...
1319 Desired=Unknown/Install/Remove/Purge/Hold
1320 | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
1321 |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
1322 ||/ Name Version Description
1323 +++-================-==============-======================================================
1324 ii libpar-dist-perl 0.31-1 perl module to create and manipulate PAR distributions
1325 libio-compress-base-perl
1326 dpkg-buildpackage: source package is libio-compress-base-perl
1327 dpkg-buildpackage: source version is 2.012-1
1328 dpkg-buildpackage: source changed by Damyan Ivanov <dmn@debian.org>
1329 dpkg-buildpackage: host architecture armel
1330 dpkg-buildpackage: source version without epoch 2.012-1
1335 dpkg-source: building libio-compress-base-perl using existing libio-compress-base-perl_2.012.orig.tar.gz
1336 dpkg-source: building libio-compress-base-perl in libio-compress-base-perl_2.012-1.diff.gz
1337 dpkg-source: building libio-compress-base-perl in libio-compress-base-perl_2.012-1.dsc
1338 dh build --before auto_configure
1340 /usr/bin/perl Makefile.PL INSTALLDIRS=vendor INST_LIB='blib/lib'
1341 Checking if your kit is complete...
1343 Writing Makefile for IO::Compress::Base
1344 dh build --after auto_configure
1346 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-base-perl/libio-compress-base-perl-2.012'
1347 cp lib/IO/Uncompress/AnyUncompress.pm blib/lib/IO/Uncompress/AnyUncompress.pm
1348 cp lib/IO/Uncompress/Base.pm blib/lib/IO/Uncompress/Base.pm
1349 cp lib/File/GlobMapper.pm blib/lib/File/GlobMapper.pm
1350 cp lib/IO/Compress/Base.pm blib/lib/IO/Compress/Base.pm
1351 cp lib/IO/Compress/Base/Common.pm blib/lib/IO/Compress/Base/Common.pm
1352 Manifying blib/man3/IO::Uncompress::Base.3pm
1353 Manifying blib/man3/IO::Uncompress::AnyUncompress.3pm
1354 Manifying blib/man3/IO::Compress::Base.3pm
1355 Manifying blib/man3/File::GlobMapper.3pm
1356 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-base-perl/libio-compress-base-perl-2.012'
1358 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-base-perl/libio-compress-base-perl-2.012'
1359 PERL_DL_NONLAZY=1 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
1362 1/78 skipped: readonly + threads
1365 All tests successful, 1 subtest skipped.
1366 Files=4, Tests=152, 6 wallclock secs ( 5.49 cusr + 0.16 csys = 5.65 CPU)
1367 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-base-perl/libio-compress-base-perl-2.012'
1369 dh install --before auto_install
1373 /scratchbox/tools/bin/make install DESTDIR=/home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-base-perl/libio-compress-base-perl-2.012/debian/libio-compress-base-perl PREFIX=/usr
1374 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-base-perl/libio-compress-base-perl-2.012'
1375 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-base-perl/libio-compress-base-perl-2.012/debian/libio-compress-base-perl/usr/share/perl5/File/GlobMapper.pm
1376 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-base-perl/libio-compress-base-perl-2.012/debian/libio-compress-base-perl/usr/share/perl5/IO/Uncompress/AnyUncompress.pm
1377 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-base-perl/libio-compress-base-perl-2.012/debian/libio-compress-base-perl/usr/share/perl5/IO/Uncompress/Base.pm
1378 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-base-perl/libio-compress-base-perl-2.012/debian/libio-compress-base-perl/usr/share/perl5/IO/Compress/Base.pm
1379 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-base-perl/libio-compress-base-perl-2.012/debian/libio-compress-base-perl/usr/share/perl5/IO/Compress/Base/Common.pm
1380 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-base-perl/libio-compress-base-perl-2.012/debian/libio-compress-base-perl/usr/share/man/man3/IO::Uncompress::AnyUncompress.3pm
1381 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-base-perl/libio-compress-base-perl-2.012/debian/libio-compress-base-perl/usr/share/man/man3/IO::Compress::Base.3pm
1382 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-base-perl/libio-compress-base-perl-2.012/debian/libio-compress-base-perl/usr/share/man/man3/IO::Uncompress::Base.3pm
1383 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-base-perl/libio-compress-base-perl-2.012/debian/libio-compress-base-perl/usr/share/man/man3/File::GlobMapper.3pm
1384 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-base-perl/libio-compress-base-perl-2.012'
1385 pod2man --section 3pm --name "IO::Compress::Base::FAQ" pod/FAQ.pod \
1386 > /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-base-perl/libio-compress-base-perl-2.012/debian/libio-compress-base-perl/usr/share/man/man3/IO::Compress::Base::FAQ.3pm
1387 dh install --after auto_install
1390 dh_installchangelogs
1425 dpkg-deb: building package `libio-compress-base-perl' in `../libio-compress-base-perl_2.012-1_all.deb'.
1427 dpkg-buildpackage: full upload (original source is included)
1428 Selecting previously deselected package libio-compress-base-perl.
1429 (Reading database ... 34876 files and directories currently installed.)
1430 Unpacking libio-compress-base-perl (from libio-compress-base-perl_2.012-1_all.deb) ...
1431 Setting up libio-compress-base-perl (2.012-1) ...
1432 Desired=Unknown/Install/Remove/Purge/Hold
1433 | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
1434 |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
1435 ||/ Name Version Description
1436 +++-========================-==============-============================================
1437 ii libio-compress-base-perl 2.012-1 Base Class for IO::Compress modules
1438 libcompress-raw-zlib-perl
1439 dpkg-buildpackage: source package is libcompress-raw-zlib-perl
1440 dpkg-buildpackage: source version is 2.012-1lenny1
1441 dpkg-buildpackage: source changed by Niko Tyni <ntyni@debian.org>
1442 dpkg-buildpackage: host architecture armel
1443 dpkg-buildpackage: source version without epoch 2.012-1lenny1
1444 QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null pop -a -R || test $? = 2
1445 Removing patch use-debian-zlib.patch
1448 Removing patch CVE-2009-1391
1452 rm -rf .pc debian/stamp-patched
1457 dpkg-source: building libcompress-raw-zlib-perl using existing libcompress-raw-zlib-perl_2.012.orig.tar.gz
1458 dpkg-source: building libcompress-raw-zlib-perl in libcompress-raw-zlib-perl_2.012-1lenny1.diff.gz
1459 dpkg-source: building libcompress-raw-zlib-perl in libcompress-raw-zlib-perl_2.012-1lenny1.dsc
1460 # quilt exits with 2 as return when there was nothing to do.
1461 # That's not an error here (but it's usefull to break loops in crude scripts)
1462 QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null push -a || test $? = 2
1463 Applying patch CVE-2009-1391
1464 patching file Zlib.xs
1466 Applying patch use-debian-zlib.patch
1467 patching file config.in
1469 Now at patch use-debian-zlib.patch
1470 touch debian/stamp-patched
1474 Parsing config.in...
1475 Auto Detect Gzip OS Code..
1476 Setting Gzip OS Code to 3 [Unix/Default]
1478 Checking if your kit is complete...
1480 'CREATE_PACKLIST' is not a known MakeMaker parameter name.
1481 Writing Makefile for Compress::Raw::Zlib
1483 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libcompress-raw-zlib-perl/libcompress-raw-zlib-perl-2.012'
1484 cp lib/Compress/Raw/Zlib.pm blib/lib/Compress/Raw/Zlib.pm
1485 AutoSplitting blib/lib/Compress/Raw/Zlib.pm (blib/lib/auto/Compress/Raw/Zlib)
1486 /targets/FREMANTLE_ARMEL/usr/bin/perl /usr/share/perl5/ExtUtils/xsubpp -typemap /usr/share/perl/5.8/ExtUtils/typemap -typemap typemap Zlib.xs > Zlib.xsc && mv Zlib.xsc Zlib.c
1487 cc -c -I/usr/inclide -D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBIAN -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -DVERSION=\"2.012\" -DXS_VERSION=\"2.012\" -fPIC "-I/usr/lib/perl/5.8/CORE" -DGZIP_OS_CODE=3 -DUSE_PPPORT_H Zlib.c
1488 Running Mkbootstrap for Compress::Raw::Zlib ()
1490 rm -f blib/arch/auto/Compress/Raw/Zlib/Zlib.so
1491 LD_RUN_PATH="" cc -shared -L/usr/local/lib Zlib.o -o blib/arch/auto/Compress/Raw/Zlib/Zlib.so -L/usr/lib -lz
1492 chmod 755 blib/arch/auto/Compress/Raw/Zlib/Zlib.so
1493 cp Zlib.bs blib/arch/auto/Compress/Raw/Zlib/Zlib.bs
1494 chmod 644 blib/arch/auto/Compress/Raw/Zlib/Zlib.bs
1495 Manifying blib/man3/Compress::Raw::Zlib.3pm
1496 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libcompress-raw-zlib-perl/libcompress-raw-zlib-perl-2.012'
1498 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libcompress-raw-zlib-perl/libcompress-raw-zlib-perl-2.012'
1499 PERL_DL_NONLAZY=1 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
1506 All tests successful.
1507 Files=6, Tests=585, 42 wallclock secs (40.75 cusr + 0.31 csys = 41.06 CPU)
1508 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libcompress-raw-zlib-perl/libcompress-raw-zlib-perl-2.012'
1515 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libcompress-raw-zlib-perl/libcompress-raw-zlib-perl-2.012'
1516 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libcompress-raw-zlib-perl/libcompress-raw-zlib-perl-2.012/debian/libcompress-raw-zlib-perl/usr/lib/perl5/auto/Compress/Raw/Zlib/Zlib.so
1517 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libcompress-raw-zlib-perl/libcompress-raw-zlib-perl-2.012/debian/libcompress-raw-zlib-perl/usr/lib/perl5/auto/Compress/Raw/Zlib/Zlib.bs
1518 Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
1519 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libcompress-raw-zlib-perl/libcompress-raw-zlib-perl-2.012/debian/libcompress-raw-zlib-perl/usr/lib/perl5/Compress/Raw/Zlib.pm
1520 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libcompress-raw-zlib-perl/libcompress-raw-zlib-perl-2.012/debian/libcompress-raw-zlib-perl/usr/lib/perl5/auto/Compress/Raw/Zlib/autosplit.ix
1521 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libcompress-raw-zlib-perl/libcompress-raw-zlib-perl-2.012/debian/libcompress-raw-zlib-perl/usr/share/man/man3/Compress::Raw::Zlib.3pm
1522 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libcompress-raw-zlib-perl/libcompress-raw-zlib-perl-2.012'
1525 dh_installchangelogs -a
1526 dh_installexamples -a
1528 dh_installcatalogs -a
1530 dh_installdebconf -a
1531 dh_installemacsen -a
1532 dh_installifupdown -a
1537 dh_installmodules -a
1538 dh_installlogcheck -a
1539 dh_installlogrotate -a
1561 dpkg-deb: building package `libcompress-raw-zlib-perl' in `../libcompress-raw-zlib-perl_2.012-1lenny1_armel.deb'.
1563 dpkg-buildpackage: binary and diff upload (original source NOT included)
1564 Selecting previously deselected package libcompress-raw-zlib-perl.
1565 (Reading database ... 34893 files and directories currently installed.)
1566 Unpacking libcompress-raw-zlib-perl (from libcompress-raw-zlib-perl_2.012-1lenny1_armel.deb) ...
1567 Setting up libcompress-raw-zlib-perl (2.012-1lenny1) ...
1568 Desired=Unknown/Install/Remove/Purge/Hold
1569 | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
1570 |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
1571 ||/ Name Version Description
1572 +++-=========================-==============-===============================================
1573 ii libcompress-raw-zlib-perl 2.012-1lenny1 low-level interface to zlib compression library
1574 libio-compress-zlib-perl
1575 dpkg-buildpackage: source package is libio-compress-zlib-perl
1576 dpkg-buildpackage: source version is 2.012-1
1577 dpkg-buildpackage: source changed by Damyan Ivanov <dmn@debian.org>
1578 dpkg-buildpackage: host architecture armel
1579 dpkg-buildpackage: source version without epoch 2.012-1
1582 dh_clean build-stamp install-stamp
1583 [ ! -f Makefile ] || /scratchbox/tools/bin/make realclean
1584 dpkg-source: building libio-compress-zlib-perl using existing libio-compress-zlib-perl_2.012.orig.tar.gz
1585 dpkg-source: building libio-compress-zlib-perl in libio-compress-zlib-perl_2.012-1.diff.gz
1586 dpkg-source: building libio-compress-zlib-perl in libio-compress-zlib-perl_2.012-1.dsc
1588 /usr/bin/perl Makefile.PL INSTALLDIRS=vendor INST_LIB='blib/lib'
1589 Checking if your kit is complete...
1591 Writing Makefile for IO::Compress::Zlib
1592 /scratchbox/tools/bin/make
1593 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012'
1594 cp lib/IO/Uncompress/RawInflate.pm blib/lib/IO/Uncompress/RawInflate.pm
1595 cp lib/IO/Compress/Adapter/Identity.pm blib/lib/IO/Compress/Adapter/Identity.pm
1596 cp lib/IO/Uncompress/Unzip.pm blib/lib/IO/Uncompress/Unzip.pm
1597 cp lib/IO/Uncompress/Adapter/Inflate.pm blib/lib/IO/Uncompress/Adapter/Inflate.pm
1598 cp lib/IO/Uncompress/Inflate.pm blib/lib/IO/Uncompress/Inflate.pm
1599 cp lib/IO/Compress/Deflate.pm blib/lib/IO/Compress/Deflate.pm
1600 cp lib/IO/Compress/Adapter/Deflate.pm blib/lib/IO/Compress/Adapter/Deflate.pm
1601 cp lib/IO/Uncompress/Gunzip.pm blib/lib/IO/Uncompress/Gunzip.pm
1602 cp lib/IO/Uncompress/Adapter/Identity.pm blib/lib/IO/Uncompress/Adapter/Identity.pm
1603 cp lib/IO/Compress/Zip.pm blib/lib/IO/Compress/Zip.pm
1604 cp lib/IO/Compress/RawDeflate.pm blib/lib/IO/Compress/RawDeflate.pm
1605 cp lib/IO/Compress/Gzip/Constants.pm blib/lib/IO/Compress/Gzip/Constants.pm
1606 cp lib/IO/Compress/Zlib/Extra.pm blib/lib/IO/Compress/Zlib/Extra.pm
1607 cp lib/IO/Uncompress/AnyInflate.pm blib/lib/IO/Uncompress/AnyInflate.pm
1608 cp lib/IO/Compress/Zip/Constants.pm blib/lib/IO/Compress/Zip/Constants.pm
1609 cp lib/IO/Compress/Gzip.pm blib/lib/IO/Compress/Gzip.pm
1610 cp lib/IO/Compress/Zlib/Constants.pm blib/lib/IO/Compress/Zlib/Constants.pm
1611 Manifying blib/man3/IO::Uncompress::RawInflate.3pm
1612 Manifying blib/man3/IO::Uncompress::Unzip.3pm
1613 Manifying blib/man3/IO::Uncompress::Inflate.3pm
1614 Manifying blib/man3/IO::Compress::Deflate.3pm
1615 Manifying blib/man3/IO::Compress::Zip.3pm
1616 Manifying blib/man3/IO::Uncompress::Gunzip.3pm
1617 Manifying blib/man3/IO::Compress::RawDeflate.3pm
1618 Manifying blib/man3/IO::Uncompress::AnyInflate.3pm
1619 Manifying blib/man3/IO::Compress::Gzip.3pm
1620 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012'
1621 /scratchbox/tools/bin/make test
1622 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012'
1623 PERL_DL_NONLAZY=1 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
1624 t/000prereq.....................ok
1625 t/001zlib-generic-deflate.......ok
1626 t/001zlib-generic-gzip..........ok
1627 t/001zlib-generic-rawdeflate....ok
1628 t/001zlib-generic-zip...........ok
1629 t/002any-deflate................ok
1630 t/002any-gzip...................ok
1631 t/002any-rawdeflate.............ok
1632 t/002any-transparent............ok
1633 t/002any-zip....................ok
1634 t/004gziphdr....................ok
1635 t/005defhdr.....................ok
1636 t/006zip........................ok
1637 32/77 skipped: IO::Compress::Bzip2 not available
1638 t/010examples...................ok
1639 t/020isize......................skipped
1640 all skipped: Lengthy Tests Disabled
1641 t/050interop-gzip...............ok
1642 t/100generic-deflate............ok
1643 t/100generic-gzip...............ok
1644 t/100generic-rawdeflate.........ok
1645 t/100generic-zip................ok
1646 t/101truncate-deflate...........ok
1647 t/101truncate-gzip..............ok
1648 t/101truncate-rawdeflate........ok
1649 t/101truncate-zip...............ok
1650 t/102tied-deflate...............ok
1651 t/102tied-gzip..................ok
1652 t/102tied-rawdeflate............ok
1653 t/102tied-zip...................ok
1654 t/103newtied-deflate............ok
1655 t/103newtied-gzip...............ok
1656 t/103newtied-rawdeflate.........ok
1657 t/103newtied-zip................ok
1658 t/104destroy-deflate............ok
1659 t/104destroy-gzip...............ok
1660 t/104destroy-rawdeflate.........ok
1661 t/104destroy-zip................ok
1662 t/105oneshot-deflate............ok
1663 2/970 skipped: readonly + threads
1664 t/105oneshot-gzip-only..........ok
1665 t/105oneshot-gzip...............ok
1666 2/970 skipped: readonly + threads
1667 t/105oneshot-rawdeflate.........ok
1668 2/970 skipped: readonly + threads
1669 t/105oneshot-zip-bzip2-only.....skipped
1670 all skipped: IO::Compress::Bzip2 not available
1671 t/105oneshot-zip-only...........ok
1672 t/105oneshot-zip................ok
1673 2/970 skipped: readonly + threads
1674 t/106prime-deflate..............ok
1675 t/106prime-gzip.................ok
1676 t/106prime-rawdeflate...........ok
1677 t/106prime-zip..................ok
1678 t/107multi-deflate..............ok
1679 t/107multi-gzip.................ok
1680 t/107multi-rawdeflate...........ok
1681 t/107multi-zip..................ok
1682 t/108anyunc-deflate.............ok
1683 t/108anyunc-gzip................ok
1684 t/108anyunc-rawdeflate..........ok
1685 t/108anyunc-transparent.........ok
1686 t/108anyunc-zip.................ok
1687 t/109merge-deflate..............ok
1688 t/109merge-gzip.................ok
1689 t/109merge-rawdeflate...........ok
1690 t/109merge-zip..................skipped
1691 all skipped: not implemented yet
1692 t/110encode-deflate.............ok
1693 t/110encode-gzip................ok
1694 t/110encode-rawdeflate..........ok
1695 t/110encode-zip.................ok
1696 t/999pod........................ok
1697 All tests successful, 3 tests and 40 subtests skipped.
1698 Files=65, Tests=38777, 445 wallclock secs (386.51 cusr + 3.95 csys = 390.46 CPU)
1699 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012'
1704 /scratchbox/tools/bin/make install DESTDIR=/home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl PREFIX=/usr
1705 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012'
1706 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/perl5/IO/Uncompress/RawInflate.pm
1707 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/perl5/IO/Uncompress/AnyInflate.pm
1708 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/perl5/IO/Uncompress/Gunzip.pm
1709 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/perl5/IO/Uncompress/Unzip.pm
1710 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/perl5/IO/Uncompress/Inflate.pm
1711 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/perl5/IO/Uncompress/Adapter/Identity.pm
1712 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/perl5/IO/Uncompress/Adapter/Inflate.pm
1713 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/perl5/IO/Compress/Gzip.pm
1714 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/perl5/IO/Compress/Deflate.pm
1715 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/perl5/IO/Compress/Zip.pm
1716 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/perl5/IO/Compress/RawDeflate.pm
1717 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/perl5/IO/Compress/Zip/Constants.pm
1718 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/perl5/IO/Compress/Adapter/Deflate.pm
1719 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/perl5/IO/Compress/Adapter/Identity.pm
1720 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/perl5/IO/Compress/Gzip/Constants.pm
1721 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/perl5/IO/Compress/Zlib/Constants.pm
1722 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/perl5/IO/Compress/Zlib/Extra.pm
1723 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/man/man3/IO::Compress::RawDeflate.3pm
1724 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/man/man3/IO::Compress::Gzip.3pm
1725 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/man/man3/IO::Uncompress::AnyInflate.3pm
1726 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/man/man3/IO::Uncompress::Unzip.3pm
1727 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/man/man3/IO::Uncompress::Gunzip.3pm
1728 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/man/man3/IO::Uncompress::RawInflate.3pm
1729 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/man/man3/IO::Compress::Zip.3pm
1730 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/man/man3/IO::Uncompress::Inflate.3pm
1731 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/man/man3/IO::Compress::Deflate.3pm
1732 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012'
1733 pod2man --section 3pm --name "IO::Compress::Zlib::FAQ" pod/FAQ.pod \
1734 > /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/man/man3/IO::Compress::Zlib::FAQ.3pm
1735 [ ! -d /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/lib/perl5 ] || \
1736 rmdir --ignore-fail-on-non-empty --parents --verbose \
1737 /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/lib/perl5
1738 # lintian override for a long line with a URL.
1739 dh_installdirs /usr/share/lintian/overrides/
1740 install -m 644 /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/lintian-overrides /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/lintian/overrides/libio-compress-zlib-perl
1744 dh_installexamples examples/*
1746 dh_installchangelogs Changes
1754 dpkg-deb: building package `libio-compress-zlib-perl' in `../libio-compress-zlib-perl_2.012-1_all.deb'.
1756 dpkg-buildpackage: full upload (original source is included)
1757 Selecting previously deselected package libio-compress-zlib-perl.
1758 (Reading database ... 34908 files and directories currently installed.)
1759 Unpacking libio-compress-zlib-perl (from libio-compress-zlib-perl_2.012-1_all.deb) ...
1760 Setting up libio-compress-zlib-perl (2.012-1) ...
1761 Desired=Unknown/Install/Remove/Purge/Hold
1762 | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
1763 |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
1764 ||/ Name Version Description
1765 +++-========================-==============-============================================
1766 ii libio-compress-zlib-perl 2.012-1 Perl interface to zlib
1768 dpkg-buildpackage: source package is libfile-which-perl
1769 dpkg-buildpackage: source version is 0.05-7
1770 dpkg-buildpackage: source changed by gregor herrmann <gregor+debian@comodo.priv.at>
1771 dpkg-buildpackage: host architecture armel
1772 dpkg-buildpackage: source version without epoch 0.05-7
1775 [ ! -f Makefile ] || /scratchbox/tools/bin/make realclean
1777 rm -f build-stamp install-stamp
1778 dpkg-source: building libfile-which-perl using existing libfile-which-perl_0.05.orig.tar.gz
1779 dpkg-source: building libfile-which-perl in libfile-which-perl_0.05-7.diff.gz
1780 dpkg-source: building libfile-which-perl in libfile-which-perl_0.05-7.dsc
1782 perl Makefile.PL INSTALLDIRS=vendor
1783 Checking if your kit is complete...
1785 Writing Makefile for File::Which
1786 /scratchbox/tools/bin/make OPTIMIZE="-O2 -g -Wall"
1787 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libfile-which-perl/libfile-which-perl-0.05'
1788 cp Which.pm blib/lib/File/Which.pm
1789 cp bin/pwhich blib/script/pwhich
1790 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/pwhich
1791 Manifying blib/man1/pwhich.1p
1792 Manifying blib/man3/File::Which.3pm
1793 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libfile-which-perl/libfile-which-perl-0.05'
1794 /scratchbox/tools/bin/make test
1795 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libfile-which-perl/libfile-which-perl-0.05'
1796 PERL_DL_NONLAZY=1 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
1801 All tests successful, 5 subtests skipped.
1802 Files=3, Tests=13, 1 wallclock secs ( 0.84 cusr + 0.08 csys = 0.92 CPU)
1803 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libfile-which-perl/libfile-which-perl-0.05'
1809 /scratchbox/tools/bin/make install PREFIX=/home/maemo/workspace/git/dh-make-perl/dev/arm/libfile-which-perl/libfile-which-perl-0.05/debian/tmp/usr
1810 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libfile-which-perl/libfile-which-perl-0.05'
1811 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libfile-which-perl/libfile-which-perl-0.05/debian/tmp/usr/share/perl5/File/Which.pm
1812 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libfile-which-perl/libfile-which-perl-0.05/debian/tmp/usr/share/man/man1/pwhich.1p
1813 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libfile-which-perl/libfile-which-perl-0.05/debian/tmp/usr/share/man/man3/File::Which.3pm
1814 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libfile-which-perl/libfile-which-perl-0.05/debian/tmp/usr/bin/pwhich
1815 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libfile-which-perl/libfile-which-perl-0.05'
1819 dh_install --sourcedir=debian/tmp \
1823 dh_installchangelogs Changes
1831 dpkg-deb: building package `libfile-which-perl' in `../libfile-which-perl_0.05-7_all.deb'.
1833 dpkg-buildpackage: binary and diff upload (original source NOT included)
1834 Selecting previously deselected package libfile-which-perl.
1835 (Reading database ... 34951 files and directories currently installed.)
1836 Unpacking libfile-which-perl (from libfile-which-perl_0.05-7_all.deb) ...
1837 Setting up libfile-which-perl (0.05-7) ...
1838 Desired=Unknown/Install/Remove/Purge/Hold
1839 | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
1840 |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
1841 ||/ Name Version Description
1842 +++-==================-==============-=======================================================
1843 ii libfile-which-perl 0.05-7 Perl module for searching paths for executable programs
1845 dpkg-buildpackage: source package is libarchive-zip-perl
1846 dpkg-buildpackage: source version is 1.18-1
1847 dpkg-buildpackage: source changed by Ben Burton <bab@debian.org>
1848 dpkg-buildpackage: host architecture armel
1849 dpkg-buildpackage: source version without epoch 1.18-1
1852 rm -f build-stamp configure-stamp
1853 rm -rf testdir extracted
1854 # Add here commands to clean up after the build process.
1855 /scratchbox/tools/bin/make clean
1856 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18'
1857 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18'
1860 dpkg-source: building libarchive-zip-perl using existing libarchive-zip-perl_1.18.orig.tar.gz
1861 dpkg-source: building libarchive-zip-perl in libarchive-zip-perl_1.18-1.diff.gz
1862 dpkg-source: building libarchive-zip-perl in libarchive-zip-perl_1.18-1.dsc
1864 # Add here commands to configure the package.
1865 /usr/bin/perl Makefile.PL INSTALLDIRS=vendor
1866 Checking if your kit is complete...
1867 Warning: the following files are missing in your kit:
1870 Please inform the author.
1871 Writing Makefile for Archive::Zip
1872 touch configure-stamp
1874 # Add here commands to compile the package.
1875 /usr/bin/perl Makefile.PL
1876 Writing Makefile for Archive::Zip
1877 /scratchbox/tools/bin/make
1878 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18'
1879 cp lib/Archive/Zip/FileMember.pm blib/lib/Archive/Zip/FileMember.pm
1880 cp lib/Archive/Zip/MockFileHandle.pm blib/lib/Archive/Zip/MockFileHandle.pm
1881 cp lib/Archive/Zip/MemberRead.pm blib/lib/Archive/Zip/MemberRead.pm
1882 cp lib/Archive/Zip/BufferedFileHandle.pm blib/lib/Archive/Zip/BufferedFileHandle.pm
1883 cp lib/Archive/Zip/StringMember.pm blib/lib/Archive/Zip/StringMember.pm
1884 cp lib/Archive/Zip/Tree.pm blib/lib/Archive/Zip/Tree.pm
1885 cp lib/Archive/Zip/FAQ.pod blib/lib/Archive/Zip/FAQ.pod
1886 cp lib/Archive/Zip/Member.pm blib/lib/Archive/Zip/Member.pm
1887 cp lib/Archive/Zip/Archive.pm blib/lib/Archive/Zip/Archive.pm
1888 cp lib/Archive/Zip.pm blib/lib/Archive/Zip.pm
1889 cp lib/Archive/Zip/ZipFileMember.pm blib/lib/Archive/Zip/ZipFileMember.pm
1890 cp lib/Archive/Zip/NewFileMember.pm blib/lib/Archive/Zip/NewFileMember.pm
1891 cp lib/Archive/Zip/DirectoryMember.pm blib/lib/Archive/Zip/DirectoryMember.pm
1892 cp bin/crc32 blib/script/crc32
1893 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/crc32
1894 Manifying blib/man3/Archive::Zip::Tree.3pm
1895 Manifying blib/man3/Archive::Zip::FAQ.3pm
1896 Manifying blib/man3/Archive::Zip.3pm
1897 Manifying blib/man3/Archive::Zip::MemberRead.3pm
1898 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18'
1899 # Make sure it all seems to be working okay.
1900 /scratchbox/tools/bin/make test
1901 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18'
1902 PERL_DL_NONLAZY=1 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
1903 t/01_compile.......ok
1904 t/02_main..........ok
1905 t/03_ex............ok
1906 t/04_readmember....ok
1907 t/05_tree..........ok
1908 t/06_update........ok
1909 t/99_author........skipped
1910 all skipped: Author tests not required for installation
1911 All tests successful, 1 test skipped.
1912 Files=7, Tests=186, 30 wallclock secs (27.76 cusr + 1.54 csys = 29.30 CPU)
1913 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18'
1919 # Add here commands to install the package into debian/tmp
1920 /scratchbox/tools/bin/make install INSTALLDIRS=vendor PREFIX=/home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18/debian/libarchive-zip-perl/usr
1921 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18'
1922 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18/debian/libarchive-zip-perl/usr/share/perl5/Archive/Zip.pm
1923 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18/debian/libarchive-zip-perl/usr/share/perl5/Archive/Zip/BufferedFileHandle.pm
1924 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18/debian/libarchive-zip-perl/usr/share/perl5/Archive/Zip/StringMember.pm
1925 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18/debian/libarchive-zip-perl/usr/share/perl5/Archive/Zip/FAQ.pod
1926 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18/debian/libarchive-zip-perl/usr/share/perl5/Archive/Zip/FileMember.pm
1927 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18/debian/libarchive-zip-perl/usr/share/perl5/Archive/Zip/ZipFileMember.pm
1928 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18/debian/libarchive-zip-perl/usr/share/perl5/Archive/Zip/Member.pm
1929 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18/debian/libarchive-zip-perl/usr/share/perl5/Archive/Zip/Tree.pm
1930 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18/debian/libarchive-zip-perl/usr/share/perl5/Archive/Zip/Archive.pm
1931 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18/debian/libarchive-zip-perl/usr/share/perl5/Archive/Zip/NewFileMember.pm
1932 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18/debian/libarchive-zip-perl/usr/share/perl5/Archive/Zip/MockFileHandle.pm
1933 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18/debian/libarchive-zip-perl/usr/share/perl5/Archive/Zip/DirectoryMember.pm
1934 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18/debian/libarchive-zip-perl/usr/share/perl5/Archive/Zip/MemberRead.pm
1935 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18/debian/libarchive-zip-perl/usr/share/man/man3/Archive::Zip::FAQ.3pm
1936 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18/debian/libarchive-zip-perl/usr/share/man/man3/Archive::Zip.3pm
1937 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18/debian/libarchive-zip-perl/usr/share/man/man3/Archive::Zip::MemberRead.3pm
1938 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18/debian/libarchive-zip-perl/usr/share/man/man3/Archive::Zip::Tree.3pm
1939 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18/debian/libarchive-zip-perl/usr/bin/crc32
1940 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18'
1941 rm -rf /home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18/debian/libarchive-zip-perl/usr/lib
1947 dh_installchangelogs Changes
1956 dpkg-deb: building package `libarchive-zip-perl' in `../libarchive-zip-perl_1.18-1_all.deb'.
1958 dpkg-buildpackage: full upload (original source is included)
1959 Selecting previously deselected package libarchive-zip-perl.
1960 (Reading database ... 34960 files and directories currently installed.)
1961 Unpacking libarchive-zip-perl (from libarchive-zip-perl_1.18-1_all.deb) ...
1962 Setting up libarchive-zip-perl (1.18-1) ...
1963 Desired=Unknown/Install/Remove/Purge/Hold
1964 | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
1965 |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
1966 ||/ Name Version Description
1967 +++-===================-==============-============================================
1968 ii libarchive-zip-perl 1.18-1 Module for manipulation of ZIP archives
1969 libarray-compare-perl
1970 dpkg-buildpackage: source package is libarray-compare-perl
1971 dpkg-buildpackage: source version is 1.16-1
1972 dpkg-buildpackage: source changed by Gunnar Wolf <gwolf@debian.org>
1973 dpkg-buildpackage: host architecture armel
1974 dpkg-buildpackage: source version without epoch 1.16-1
1977 dh_clean build-stamp install-stamp
1978 [ ! -f Build ] || ./Build distclean
1979 libtree-dagnode-perl
1980 dpkg-buildpackage: source package is libtree-dagnode-perl
1981 dpkg-buildpackage: source version is 1.06-1
1982 dpkg-buildpackage: source changed by Roberto C. Sanchez <roberto@debian.org>
1983 dpkg-buildpackage: host architecture armel
1984 dpkg-buildpackage: source version without epoch 1.06-1
1987 dh_clean build-stamp install-stamp
1988 [ ! -f Makefile ] || /scratchbox/tools/bin/make realclean
1989 dpkg-source: building libtree-dagnode-perl using existing libtree-dagnode-perl_1.06.orig.tar.gz
1990 dpkg-source: building libtree-dagnode-perl in libtree-dagnode-perl_1.06-1.diff.gz
1991 dpkg-source: building libtree-dagnode-perl in libtree-dagnode-perl_1.06-1.dsc
1993 perl Makefile.PL verbose INSTALLDIRS=vendor
1994 Checking if your kit is complete...
1996 ABSTRACT_FROM => q[lib/Tree/DAG_Node.pm]
1997 AUTHOR => q[David Hand, <cogent@cpan.org>]
1998 INSTALLDIRS => q[vendor]
2000 'LICENSE' is not a known MakeMaker parameter name.
2001 NAME => q[Tree::DAG_Node]
2002 PREREQ_PM => { strict=>q[0], vars=>q[0], Carp=>q[0] }
2003 VERSION_FROM => q[lib/Tree/DAG_Node.pm]
2004 dist => { COMPRESS=>q[gzip -6f], SUFFIX=>q[gz] }
2005 Using PERL=/targets/FREMANTLE_ARMEL/usr/bin/perl
2006 Writing Makefile for Tree::DAG_Node
2007 /scratchbox/tools/bin/make
2008 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libtree-dagnode-perl/libtree-dagnode-perl-1.06'
2009 cp lib/Tree/DAG_Node.pm blib/lib/Tree/DAG_Node.pm
2010 Manifying blib/man3/Tree::DAG_Node.3pm
2011 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libtree-dagnode-perl/libtree-dagnode-perl-1.06'
2012 /scratchbox/tools/bin/make test
2013 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libtree-dagnode-perl/libtree-dagnode-perl-1.06'
2014 PERL_DL_NONLAZY=1 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
2015 t/00_about_verbose....ok
2016 t/01_old_junk.........ok
2017 All tests successful.
2018 Files=2, Tests=3, 1 wallclock secs ( 0.70 cusr + 0.04 csys = 0.74 CPU)
2019 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libtree-dagnode-perl/libtree-dagnode-perl-1.06'
2024 /scratchbox/tools/bin/make install DESTDIR=/home/maemo/workspace/git/dh-make-perl/dev/arm/libtree-dagnode-perl/libtree-dagnode-perl-1.06/debian/libtree-dagnode-perl PREFIX=/usr
2025 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libtree-dagnode-perl/libtree-dagnode-perl-1.06'
2026 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libtree-dagnode-perl/libtree-dagnode-perl-1.06/debian/libtree-dagnode-perl/usr/share/perl5/Tree/DAG_Node.pm
2027 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libtree-dagnode-perl/libtree-dagnode-perl-1.06/debian/libtree-dagnode-perl/usr/share/man/man3/Tree::DAG_Node.3pm
2028 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libtree-dagnode-perl/libtree-dagnode-perl-1.06'
2029 [ ! -d /home/maemo/workspace/git/dh-make-perl/dev/arm/libtree-dagnode-perl/libtree-dagnode-perl-1.06/debian/libtree-dagnode-perl/usr/lib/perl5 ] || rmdir --ignore-fail-on-non-empty --parents --verbose /home/maemo/workspace/git/dh-make-perl/dev/arm/libtree-dagnode-perl/libtree-dagnode-perl-1.06/debian/libtree-dagnode-perl/usr/lib/perl5
2033 dh_installchangelogs ChangeLog
2042 dpkg-deb: building package `libtree-dagnode-perl' in `../libtree-dagnode-perl_1.06-1_all.deb'.
2044 dpkg-buildpackage: full upload (original source is included)
2045 Selecting previously deselected package libtree-dagnode-perl.
2046 (Reading database ... 35011 files and directories currently installed.)
2047 Unpacking libtree-dagnode-perl (from libtree-dagnode-perl_1.06-1_all.deb) ...
2048 Setting up libtree-dagnode-perl (1.06-1) ...
2049 Desired=Unknown/Install/Remove/Purge/Hold
2050 | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
2051 |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
2052 ||/ Name Version Description
2053 +++-====================-==============-==============================================================
2054 ii libtree-dagnode-perl 1.06-1 Tree::DAG_Node - (super)class for representing nodes in a tree
2056 dpkg-buildpackage: source package is libnet-ssleay-perl
2057 dpkg-buildpackage: source version is 1.35-1
2058 dpkg-buildpackage: source changed by gregor herrmann <gregoa@debian.org>
2059 dpkg-buildpackage: host architecture armel
2060 dpkg-buildpackage: source version without epoch 1.35-1
2061 QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null pop -a -R || test $? = 2
2062 Removing patch 20no-stray-libz-link.patch
2063 Restoring inc/Module/Install/PRIVATE/Net/SSLeay.pm
2065 Removing patch 10fix_pod.patch
2066 Restoring lib/Net/SSLeay.pm
2069 rm -rf .pc debian/stamp-patched
2074 dpkg-source: building libnet-ssleay-perl using existing libnet-ssleay-perl_1.35.orig.tar.gz
2075 dpkg-source: building libnet-ssleay-perl in libnet-ssleay-perl_1.35-1.diff.gz
2076 dpkg-source: building libnet-ssleay-perl in libnet-ssleay-perl_1.35-1.dsc
2077 # quilt exits with 2 as return when there was nothing to do.
2078 # That's not an error here (but it's usefull to break loops in crude scripts)
2079 QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null push -a || test $? = 2
2080 Applying patch 10fix_pod.patch
2081 patching file lib/Net/SSLeay.pm
2083 Applying patch 20no-stray-libz-link.patch
2084 patching file inc/Module/Install/PRIVATE/Net/SSLeay.pm
2086 Now at patch 20no-stray-libz-link.patch
2087 touch debian/stamp-patched
2091 *** Found OpenSSL-0.9.8c installed in /usr
2092 *** Be sure to use the same compiler and options to compile your OpenSSL, perl,
2093 and Net::SSLeay. Mixing and matching compilers is not supported.
2094 Do you want to run external tests?
2095 These tests *will* *fail* if you do not have network connectivity. [n] n
2096 Checking if your kit is complete...
2098 'CREATE_PACKLIST' is not a known MakeMaker parameter name.
2099 Writing Makefile for Net::SSLeay
2101 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35'
2102 cp lib/Net/SSLeay.pm blib/lib/Net/SSLeay.pm
2103 AutoSplitting blib/lib/Net/SSLeay.pm (blib/lib/auto/Net/SSLeay)
2104 blib/lib/Net/SSLeay.pm: some names are not unique when truncated to 8 characters:
2105 directory blib/lib/auto/Net/SSLeay:
2106 do_https3.al, do_https2.al, do_https4.al, do_https.al truncate to do_https
2107 do_httpx3.al, do_httpx2.al, do_httpx4.al truncate to do_httpx
2108 get_https.al, get_https3.al, get_https4.al, get_http.al, get_http3.al, get_http4.al, get_httpx.al, get_httpx3.al, get_httpx4.al truncate to get_http
2109 head_https.al, head_https3.al, head_https4.al, head_http.al, head_http3.al, head_http4.al, head_httpx.al, head_httpx3.al, head_httpx4.al truncate to head_htt
2110 post_https.al, post_https3.al, post_https4.al, post_http.al, post_http3.al, post_http4.al, post_httpx.al, post_httpx3.al, post_httpx4.al truncate to post_htt
2111 put_https.al, put_https3.al, put_https4.al, put_http.al, put_http3.al, put_http4.al, put_httpx.al, put_httpx3.al, put_httpx4.al truncate to put_http
2112 ssl_read_all.al, ssl_read_until.al, ssl_read_CRLF.al truncate to ssl_read
2113 ssl_write_all.al, ssl_write_CRLF.al truncate to ssl_writ
2114 tcp_read_all.al, tcp_read_until.al, tcp_read_CRLF.al truncate to tcp_read
2115 tcp_write_all.al, tcp_write_CRLF.al truncate to tcp_writ
2116 cp lib/Net/SSLeay/Handle.pm blib/lib/Net/SSLeay/Handle.pm
2117 /targets/FREMANTLE_ARMEL/usr/bin/perl "-Iinc" /usr/share/perl5/ExtUtils/xsubpp -typemap /usr/share/perl/5.8/ExtUtils/typemap -typemap typemap SSLeay.xs > SSLeay.xsc && mv SSLeay.xsc SSLeay.c
2118 cc -c -I/usr/include -I/usr/inc32 -I/usr/kerberos/include -D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBIAN -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -DVERSION=\"1.35\" -DXS_VERSION=\"1.35\" -fPIC "-I/usr/lib/perl/5.8/CORE" SSLeay.c
2119 Running Mkbootstrap for Net::SSLeay ()
2121 rm -f blib/arch/auto/Net/SSLeay/SSLeay.so
2122 LD_RUN_PATH="" cc -shared -L/usr/local/lib SSLeay.o -o blib/arch/auto/Net/SSLeay/SSLeay.so -L/usr -L/usr/lib -lssl -lcrypto
2123 chmod 755 blib/arch/auto/Net/SSLeay/SSLeay.so
2124 cp SSLeay.bs blib/arch/auto/Net/SSLeay/SSLeay.bs
2125 chmod 644 blib/arch/auto/Net/SSLeay/SSLeay.bs
2126 Manifying blib/man3/Net::SSLeay.3pm
2127 Manifying blib/man3/Net::SSLeay::Handle.3pm
2128 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35'
2130 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35'
2131 PERL_DL_NONLAZY=1 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'inc', 'blib/lib', 'blib/arch')" t/local/*.t t/handle/local/*.t
2132 t/handle/local/05_use..........ok
2133 t/local/00_ptr_cast............ok
2134 t/local/01_pod.................ok
2135 t/local/02_pod_coverage........skipped
2136 all skipped: currently disabled
2137 t/local/03_use.................ok
2138 t/local/04_basic...............ok
2139 3/4 skipped: Neet Test::Exception for the some tests
2140 t/local/05_passwd_cb...........ok
2141 t/local/06_tcpecho.............ok
2142 t/local/07_sslecho.............ok
2143 t/local/08_pipe................ok
2144 t/local/15_bio.................ok
2145 t/local/20_autoload............skipped
2146 all skipped: Some tests need Test::Exception
2147 t/local/30_error...............skipped
2148 all skipped: Requires Test::Exception, Test::Warn and Test::NoWarnings
2149 t/local/31_rsa_generate_key....skipped
2150 all skipped: Test::Exception required
2151 t/local/35_ephemeral...........ok
2152 t/local/50_digest..............ok
2153 t/local/kwalitee...............skipped
2154 all skipped: Needs Test::Kwalitee
2155 All tests successful, 5 tests and 3 subtests skipped.
2156 Files=17, Tests=144, 18 wallclock secs (17.41 cusr + 0.83 csys = 18.24 CPU)
2157 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35'
2164 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35'
2165 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/SSLeay.so
2166 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/SSLeay.bs
2167 Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
2168 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/post_httpx4.al
2169 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/make_form.al
2170 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/make_headers.al
2171 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/head_http4.al
2172 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/head_https4.al
2173 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/post_https.al
2174 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/post_https4.al
2175 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/ssl_read_until.al
2176 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/tcp_write_CRLF.al
2177 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/autosplit.ix
2178 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/get_http3.al
2179 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/put_httpx3.al
2180 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/do_httpx2.al
2181 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/get_http4.al
2182 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/tcp_read_CRLF.al
2183 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/do_httpx4.al
2184 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/head_httpx.al
2185 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/https_cat.al
2186 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/put_httpx4.al
2187 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/debug_read.al
2188 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/tcp_read_until.al
2189 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/post_http.al
2190 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/tcp_read_all.al
2191 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/tcpcat.al
2192 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/get_http.al
2193 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/put_https3.al
2194 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/tcpxcat.al
2195 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/want_write.al
2196 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/randomize.al
2197 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/do_https3.al
2198 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/head_httpx3.al
2199 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/set_proxy.al
2200 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/get_https.al
2201 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/post_https3.al
2202 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/head_httpx4.al
2203 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/do_https2.al
2204 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/head_http.al
2205 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/get_httpx4.al
2206 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/get_httpx3.al
2207 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/dump_peer_certificate.al
2208 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/open_tcp_connection.al
2209 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/put_http3.al
2210 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/put_https.al
2211 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/ssl_write_all.al
2212 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/get_https4.al
2213 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/post_httpx.al
2214 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/do_httpx3.al
2215 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/do_https.al
2216 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/head_https.al
2217 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/ssl_read_CRLF.al
2218 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/set_server_cert_and_key.al
2219 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/head_http3.al
2220 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/ssl_write_CRLF.al
2221 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/post_http3.al
2222 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/get_https3.al
2223 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/new_x_ctx.al
2224 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/put_http.al
2225 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/head_https3.al
2226 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/set_cert_and_key.al
2227 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/ssl_read_all.al
2228 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/httpx_cat.al
2229 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/want_read.al
2230 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/get_httpx.al
2231 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/put_http4.al
2232 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/http_cat.al
2233 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/post_http4.al
2234 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/tcp_write_all.al
2235 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/put_httpx.al
2236 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/open_proxy_tcp_connection.al
2237 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/put_https4.al
2238 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/want_nothing.al
2239 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/want_X509_lookup.al
2240 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/post_httpx3.al
2241 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/sslcat.al
2242 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/do_https4.al
2243 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/Net/SSLeay.pm
2244 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/Net/SSLeay/Handle.pm
2245 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/share/man/man3/Net::SSLeay.3pm
2246 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/share/man/man3/Net::SSLeay::Handle.3pm
2247 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35'
2250 dh_installchangelogs
2288 dpkg-deb: building package `libnet-ssleay-perl' in `../libnet-ssleay-perl_1.35-1_armel.deb'.
2290 dpkg-buildpackage: full upload (original source is included)
2291 Selecting previously deselected package libnet-ssleay-perl.
2292 (Reading database ... 35018 files and directories currently installed.)
2293 Unpacking libnet-ssleay-perl (from libnet-ssleay-perl_1.35-1_armel.deb) ...
2294 Setting up libnet-ssleay-perl (1.35-1) ...
2295 Desired=Unknown/Install/Remove/Purge/Hold
2296 | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
2297 |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
2298 ||/ Name Version Description
2299 +++-==================-==============-============================================
2300 ii libnet-ssleay-perl 1.35-1 Perl module for Secure Sockets Layer (SSL)
2301 libio-socket-ssl-perl
2302 dpkg-buildpackage: source package is libio-socket-ssl-perl
2303 dpkg-buildpackage: source version is 1.16-1+lenny1
2304 dpkg-buildpackage: source changed by Dominic Hargreaves <dom@earth.li>
2305 dpkg-buildpackage: host architecture armel
2306 dpkg-buildpackage: source version without epoch 1.16-1+lenny1
2307 QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null pop -a -R || test $? = 2
2308 Removing patch partial_hostname_fix.patch
2310 Restoring t/verify_hostname.t
2312 Removing patch disable_timebomb_tests.patch
2313 Restoring t/auto_verify_hostname.t
2314 Restoring t/sessions.t
2315 Restoring t/compatibility.t
2317 Restoring t/verify_hostname.t
2320 rm -rf .pc debian/stamp-patched
2325 dpkg-source: building libio-socket-ssl-perl in libio-socket-ssl-perl_1.16-1+lenny1.tar.gz
2326 dpkg-source: building libio-socket-ssl-perl in libio-socket-ssl-perl_1.16-1+lenny1.dsc
2327 # quilt exits with 2 as return when there was nothing to do.
2328 # That's not an error here (but it's usefull to break loops in crude scripts)
2329 QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null push -a || test $? = 2
2330 Applying patch disable_timebomb_tests.patch
2331 patching file t/auto_verify_hostname.t
2332 patching file t/compatibility.t
2333 patching file t/core.t
2334 patching file t/sessions.t
2335 patching file t/verify_hostname.t
2337 Applying patch partial_hostname_fix.patch
2338 patching file SSL.pm
2339 patching file t/verify_hostname.t
2340 Hunk #1 succeeded at 91 (offset 3 lines).
2342 Now at patch partial_hostname_fix.patch
2343 touch debian/stamp-patched
2347 Checking if your kit is complete...
2349 'CREATE_PACKLIST' is not a known MakeMaker parameter name.
2350 Writing Makefile for IO::Socket::SSL
2352 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libio-socket-ssl-perl/libio-socket-ssl-perl-1.16'
2353 cp SSL.pm blib/lib/IO/Socket/SSL.pm
2354 Manifying blib/man3/IO::Socket::SSL.3pm
2355 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libio-socket-ssl-perl/libio-socket-ssl-perl-1.16'
2357 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libio-socket-ssl-perl/libio-socket-ssl-perl-1.16'
2358 PERL_DL_NONLAZY=1 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
2359 t/01loadmodule............ok
2360 t/02settings..............ok
2361 t/acceptSSL-timeout.......ok
2362 t/auto_verify_hostname....skipped
2363 all skipped: test cert has expired
2364 t/cert_no_file............ok
2365 t/compatibility...........skipped
2366 all skipped: test cert has expired
2367 t/connectSSL-timeout......ok
2368 t/core....................skipped
2369 all skipped: test cert has expired
2370 t/dhe.....................ok
2371 t/nonblock................ok
2372 t/readline................ok
2373 t/sessions................skipped
2374 all skipped: test cert has expired
2375 t/start-stopssl...........ok
2376 t/startssl................ok
2377 t/sysread_write...........ok
2378 t/verify_hostname.........skipped
2379 all skipped: test cert has expired
2380 All tests successful, 5 tests skipped.
2381 Files=16, Tests=123, 54 wallclock secs (23.44 cusr + 1.02 csys = 24.46 CPU)
2382 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libio-socket-ssl-perl/libio-socket-ssl-perl-1.16'
2389 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libio-socket-ssl-perl/libio-socket-ssl-perl-1.16'
2390 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-socket-ssl-perl/libio-socket-ssl-perl-1.16/debian/libio-socket-ssl-perl/usr/share/perl5/IO/Socket/SSL.pm
2391 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-socket-ssl-perl/libio-socket-ssl-perl-1.16/debian/libio-socket-ssl-perl/usr/share/man/man3/IO::Socket::SSL.3pm
2392 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libio-socket-ssl-perl/libio-socket-ssl-perl-1.16'
2395 dh_installchangelogs
2430 dpkg-deb: building package `libio-socket-ssl-perl' in `../libio-socket-ssl-perl_1.16-1+lenny1_all.deb'.
2432 dpkg-buildpackage: full upload; Debian-native package (full source is included)
2433 Selecting previously deselected package libio-socket-ssl-perl.
2434 (Reading database ... 35135 files and directories currently installed.)
2435 Unpacking libio-socket-ssl-perl (from libio-socket-ssl-perl_1.16-1+lenny1_all.deb) ...
2436 Setting up libio-socket-ssl-perl (1.16-1+lenny1) ...
2437 Desired=Unknown/Install/Remove/Purge/Hold
2438 | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
2439 |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
2440 ||/ Name Version Description
2441 +++-=====================-==============-=================================================================
2442 ii libio-socket-ssl-perl 1.16-1+lenny1 Perl module implementing object oriented interface to SSL sockets
2444 dpkg-buildpackage: source package is liburi-perl
2445 dpkg-buildpackage: source version is 1.35.dfsg.1-1
2446 dpkg-buildpackage: source changed by Stefan Hornburg (Racke) <racke@linuxia.de>
2447 dpkg-buildpackage: host architecture armel
2448 dpkg-buildpackage: source version without epoch 1.35.dfsg.1-1
2451 rm -f build-stamp install-stamp
2452 # Add here commands to clean up after the build process.
2453 /scratchbox/tools/bin/make clean
2454 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1'
2455 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1'
2456 rm Makefile Makefile.old
2457 rm -rf debian/liburi-perl
2459 dpkg-source: building liburi-perl using existing liburi-perl_1.35.dfsg.1.orig.tar.gz
2460 dpkg-source: building liburi-perl in liburi-perl_1.35.dfsg.1-1.diff.gz
2461 dpkg-source: building liburi-perl in liburi-perl_1.35.dfsg.1-1.dsc
2463 /usr/bin/perl Makefile.PL INSTALLDIRS=vendor
2464 Checking if your kit is complete...
2465 Warning: the following files are missing in your kit:
2467 Please inform the author.
2468 Writing Makefile for URI
2469 /scratchbox/tools/bin/make
2470 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1'
2471 cp URI/_ldap.pm blib/lib/URI/_ldap.pm
2472 cp URI/ftp.pm blib/lib/URI/ftp.pm
2473 cp URI/_segment.pm blib/lib/URI/_segment.pm
2474 cp URI/file/OS2.pm blib/lib/URI/file/OS2.pm
2475 cp URI/_generic.pm blib/lib/URI/_generic.pm
2476 cp URI/file/QNX.pm blib/lib/URI/file/QNX.pm
2477 cp URI/nntp.pm blib/lib/URI/nntp.pm
2478 cp URI/tn3270.pm blib/lib/URI/tn3270.pm
2479 cp URI/QueryParam.pm blib/lib/URI/QueryParam.pm
2480 cp URI/sips.pm blib/lib/URI/sips.pm
2481 cp URI/gopher.pm blib/lib/URI/gopher.pm
2482 cp URI/urn/oid.pm blib/lib/URI/urn/oid.pm
2483 cp URI/WithBase.pm blib/lib/URI/WithBase.pm
2484 cp URI.pm blib/lib/URI.pm
2485 cp URI/file/Base.pm blib/lib/URI/file/Base.pm
2486 cp URI/ldapi.pm blib/lib/URI/ldapi.pm
2487 cp URI/mailto.pm blib/lib/URI/mailto.pm
2488 cp URI/file/Unix.pm blib/lib/URI/file/Unix.pm
2489 cp URI/data.pm blib/lib/URI/data.pm
2490 cp URI/_userpass.pm blib/lib/URI/_userpass.pm
2491 cp URI/urn.pm blib/lib/URI/urn.pm
2492 cp URI/ldap.pm blib/lib/URI/ldap.pm
2493 cp URI/telnet.pm blib/lib/URI/telnet.pm
2494 cp URI/mms.pm blib/lib/URI/mms.pm
2495 cp URI/_foreign.pm blib/lib/URI/_foreign.pm
2496 cp URI/_server.pm blib/lib/URI/_server.pm
2497 cp URI/Heuristic.pm blib/lib/URI/Heuristic.pm
2498 cp URI/URL.pm blib/lib/URI/URL.pm
2499 cp URI/_query.pm blib/lib/URI/_query.pm
2500 cp URI/rtsp.pm blib/lib/URI/rtsp.pm
2501 cp URI/file.pm blib/lib/URI/file.pm
2502 cp URI/Split.pm blib/lib/URI/Split.pm
2503 cp URI/rlogin.pm blib/lib/URI/rlogin.pm
2504 cp URI/news.pm blib/lib/URI/news.pm
2505 cp URI/urn/isbn.pm blib/lib/URI/urn/isbn.pm
2506 cp URI/http.pm blib/lib/URI/http.pm
2507 cp URI/ssh.pm blib/lib/URI/ssh.pm
2508 cp URI/rsync.pm blib/lib/URI/rsync.pm
2509 cp URI/https.pm blib/lib/URI/https.pm
2510 cp URI/file/Win32.pm blib/lib/URI/file/Win32.pm
2511 cp URI/ldaps.pm blib/lib/URI/ldaps.pm
2512 cp URI/snews.pm blib/lib/URI/snews.pm
2513 cp URI/pop.pm blib/lib/URI/pop.pm
2514 cp URI/rtspu.pm blib/lib/URI/rtspu.pm
2515 cp URI/Escape.pm blib/lib/URI/Escape.pm
2516 cp URI/file/FAT.pm blib/lib/URI/file/FAT.pm
2517 cp URI/sip.pm blib/lib/URI/sip.pm
2518 cp URI/_login.pm blib/lib/URI/_login.pm
2519 cp URI/file/Mac.pm blib/lib/URI/file/Mac.pm
2520 Manifying blib/man3/URI::WithBase.3pm
2521 Manifying blib/man3/URI::URL.3pm
2522 Manifying blib/man3/URI.3pm
2523 Manifying blib/man3/URI::file.3pm
2524 Manifying blib/man3/URI::Split.3pm
2525 Manifying blib/man3/URI::data.3pm
2526 Manifying blib/man3/URI::ldap.3pm
2527 Manifying blib/man3/URI::Escape.3pm
2528 Manifying blib/man3/URI::QueryParam.3pm
2529 Manifying blib/man3/URI::Heuristic.3pm
2530 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1'
2536 /scratchbox/tools/bin/make install PREFIX=/home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr; \
2538 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1'
2539 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI.pm
2540 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/mailto.pm
2541 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/mms.pm
2542 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/_server.pm
2543 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/_login.pm
2544 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/rsync.pm
2545 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/_query.pm
2546 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/sips.pm
2547 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/data.pm
2548 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/Split.pm
2549 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/pop.pm
2550 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/urn.pm
2551 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/nntp.pm
2552 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/ldapi.pm
2553 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/_segment.pm
2554 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/ftp.pm
2555 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/_foreign.pm
2556 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/rlogin.pm
2557 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/snews.pm
2558 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/http.pm
2559 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/QueryParam.pm
2560 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/WithBase.pm
2561 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/tn3270.pm
2562 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/_ldap.pm
2563 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/rtspu.pm
2564 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/gopher.pm
2565 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/_userpass.pm
2566 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/file.pm
2567 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/ldap.pm
2568 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/telnet.pm
2569 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/URL.pm
2570 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/https.pm
2571 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/rtsp.pm
2572 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/ssh.pm
2573 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/Heuristic.pm
2574 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/_generic.pm
2575 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/Escape.pm
2576 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/news.pm
2577 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/sip.pm
2578 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/ldaps.pm
2579 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/file/Unix.pm
2580 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/file/QNX.pm
2581 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/file/Win32.pm
2582 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/file/OS2.pm
2583 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/file/Mac.pm
2584 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/file/Base.pm
2585 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/file/FAT.pm
2586 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/urn/oid.pm
2587 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/urn/isbn.pm
2588 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/man/man3/URI::ldap.3pm
2589 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/man/man3/URI::QueryParam.3pm
2590 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/man/man3/URI.3pm
2591 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/man/man3/URI::file.3pm
2592 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/man/man3/URI::URL.3pm
2593 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/man/man3/URI::Split.3pm
2594 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/man/man3/URI::data.3pm
2595 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/man/man3/URI::WithBase.3pm
2596 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/man/man3/URI::Heuristic.3pm
2597 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/man/man3/URI::Escape.3pm
2598 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1'
2601 dh_installdocs README
2607 dh_installchangelogs Changes
2616 dpkg-deb: building package `liburi-perl' in `../liburi-perl_1.35.dfsg.1-1_all.deb'.
2618 dpkg-buildpackage: full upload (original source is included)
2619 Selecting previously deselected package liburi-perl.
2620 (Reading database ... 35149 files and directories currently installed.)
2621 Unpacking liburi-perl (from liburi-perl_1.35.dfsg.1-1_all.deb) ...
2622 Setting up liburi-perl (1.35.dfsg.1-1) ...
2623 Desired=Unknown/Install/Remove/Purge/Hold
2624 | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
2625 |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
2626 ||/ Name Version Description
2627 +++-==============-==============-============================================
2628 ii liburi-perl 1.35.dfsg.1-1 Manipulates and accesses URI strings
2630 dpkg-buildpackage: source package is libhtml-tagset-perl
2631 dpkg-buildpackage: source version is 3.20-2
2632 dpkg-buildpackage: source changed by gregor herrmann <gregor+debian@comodo.priv.at>
2633 dpkg-buildpackage: host architecture armel
2634 dpkg-buildpackage: source version without epoch 3.20-2
2635 QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null pop -a -R || test $? = 2
2636 Removing patch isbodyelement.patch
2640 rm -rf .pc debian/stamp-patched
2643 dh_clean build-stamp install-stamp
2644 [ ! -f Makefile ] || /scratchbox/tools/bin/make realclean
2645 dpkg-source: building libhtml-tagset-perl using existing libhtml-tagset-perl_3.20.orig.tar.gz
2646 dpkg-source: building libhtml-tagset-perl in libhtml-tagset-perl_3.20-2.diff.gz
2647 dpkg-source: building libhtml-tagset-perl in libhtml-tagset-perl_3.20-2.dsc
2648 # quilt exits with 2 as return when there was nothing to do.
2649 # That's not an error here (but it's usefull to break loops in crude scripts)
2650 QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null push -a || test $? = 2
2651 Applying patch isbodyelement.patch
2652 patching file Tagset.pm
2654 Now at patch isbodyelement.patch
2655 touch debian/stamp-patched
2657 /usr/bin/perl Makefile.PL INSTALLDIRS=vendor
2658 Checking if your kit is complete...
2660 Writing Makefile for HTML::Tagset
2661 /scratchbox/tools/bin/make
2662 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tagset-perl/libhtml-tagset-perl-3.20'
2663 cp Tagset.pm blib/lib/HTML/Tagset.pm
2664 Manifying blib/man3/HTML::Tagset.3pm
2665 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tagset-perl/libhtml-tagset-perl-3.20'
2666 /scratchbox/tools/bin/make test
2667 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tagset-perl/libhtml-tagset-perl-3.20'
2668 PERL_DL_NONLAZY=1 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
2669 t/00_about_verbose....ok
2670 t/01_old_junk.........ok
2671 t/pod.................ok
2672 All tests successful.
2673 Files=3, Tests=4, 1 wallclock secs ( 1.64 cusr + 0.10 csys = 1.74 CPU)
2674 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tagset-perl/libhtml-tagset-perl-3.20'
2679 /scratchbox/tools/bin/make install DESTDIR=/home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tagset-perl/libhtml-tagset-perl-3.20/debian/libhtml-tagset-perl PREFIX=/usr
2680 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tagset-perl/libhtml-tagset-perl-3.20'
2681 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tagset-perl/libhtml-tagset-perl-3.20/debian/libhtml-tagset-perl/usr/share/perl5/HTML/Tagset.pm
2682 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tagset-perl/libhtml-tagset-perl-3.20/debian/libhtml-tagset-perl/usr/share/man/man3/HTML::Tagset.3pm
2683 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tagset-perl/libhtml-tagset-perl-3.20'
2684 [ ! -d /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tagset-perl/libhtml-tagset-perl-3.20/debian/libhtml-tagset-perl/usr/lib/perl5 ] || \
2685 rmdir --ignore-fail-on-non-empty --parents --verbose \
2686 /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tagset-perl/libhtml-tagset-perl-3.20/debian/libhtml-tagset-perl/usr/lib/perl5
2691 dh_installchangelogs Changes
2699 dpkg-deb: building package `libhtml-tagset-perl' in `../libhtml-tagset-perl_3.20-2_all.deb'.
2701 dpkg-buildpackage: binary and diff upload (original source NOT included)
2702 Selecting previously deselected package libhtml-tagset-perl.
2703 (Reading database ... 35217 files and directories currently installed.)
2704 Unpacking libhtml-tagset-perl (from libhtml-tagset-perl_3.20-2_all.deb) ...
2705 Setting up libhtml-tagset-perl (3.20-2) ...
2706 Desired=Unknown/Install/Remove/Purge/Hold
2707 | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
2708 |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
2709 ||/ Name Version Description
2710 +++-===================-==============-============================================
2711 ii libhtml-tagset-perl 3.20-2 Data tables pertaining to HTML
2713 dpkg-buildpackage: source package is libhtml-parser-perl
2714 dpkg-buildpackage: source version is 3.56-1+lenny1
2715 dpkg-buildpackage: source changed by Salvatore Bonaccorso <salvatore.bonaccorso@gmail.com>
2716 dpkg-buildpackage: host architecture armel
2717 dpkg-buildpackage: source version without epoch 3.56-1+lenny1
2720 if [ -e Makefile ]; then /scratchbox/tools/bin/make -i distclean; fi
2721 rm -f build-stamp configure-stamp
2723 dpkg-source: building libhtml-parser-perl using existing libhtml-parser-perl_3.56.orig.tar.gz
2724 dpkg-source: building libhtml-parser-perl in libhtml-parser-perl_3.56-1+lenny1.diff.gz
2725 dpkg-source: building libhtml-parser-perl in libhtml-parser-perl_3.56-1+lenny1.dsc
2727 /usr/bin/perl Makefile.PL INSTALLDIRS=vendor
2728 Checking if your kit is complete...
2730 Writing Makefile for HTML::Parser
2731 touch configure-stamp
2733 /scratchbox/tools/bin/make OPTIMIZE="-O2 -g -Wall"
2734 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56'
2735 cp lib/HTML/PullParser.pm blib/lib/HTML/PullParser.pm
2736 cp Parser.pm blib/lib/HTML/Parser.pm
2737 cp lib/HTML/Entities.pm blib/lib/HTML/Entities.pm
2738 cp lib/HTML/LinkExtor.pm blib/lib/HTML/LinkExtor.pm
2739 cp lib/HTML/TokeParser.pm blib/lib/HTML/TokeParser.pm
2740 cp lib/HTML/HeadParser.pm blib/lib/HTML/HeadParser.pm
2741 cp lib/HTML/Filter.pm blib/lib/HTML/Filter.pm
2742 /targets/FREMANTLE_ARMEL/usr/bin/perl /usr/share/perl5/ExtUtils/xsubpp -typemap /usr/share/perl/5.8/ExtUtils/typemap -typemap typemap Parser.xs > Parser.xsc && mv Parser.xsc Parser.c
2743 /targets/FREMANTLE_ARMEL/usr/bin/perl mkhctype >hctype.h
2744 /targets/FREMANTLE_ARMEL/usr/bin/perl mkpfunc >pfunc.h
2745 cc -c -D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBIAN -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -DVERSION=\"3.56\" -DXS_VERSION=\"3.56\" -fPIC "-I/usr/lib/perl/5.8/CORE" -DMARKED_SECTION Parser.c
2746 Running Mkbootstrap for HTML::Parser ()
2748 rm -f blib/arch/auto/HTML/Parser/Parser.so
2749 LD_RUN_PATH="" cc -shared -L/usr/local/lib Parser.o -o blib/arch/auto/HTML/Parser/Parser.so
2750 chmod 755 blib/arch/auto/HTML/Parser/Parser.so
2751 cp Parser.bs blib/arch/auto/HTML/Parser/Parser.bs
2752 chmod 644 blib/arch/auto/HTML/Parser/Parser.bs
2753 Manifying blib/man3/HTML::PullParser.3pm
2754 Manifying blib/man3/HTML::Entities.3pm
2755 Manifying blib/man3/HTML::Parser.3pm
2756 Manifying blib/man3/HTML::TokeParser.3pm
2757 Manifying blib/man3/HTML::LinkExtor.3pm
2758 Manifying blib/man3/HTML::Filter.3pm
2759 Manifying blib/man3/HTML::HeadParser.3pm
2760 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56'
2761 /scratchbox/tools/bin/make test
2762 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56'
2763 PERL_DL_NONLAZY=1 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
2764 t/api_version........ok
2765 t/argspec-bad........ok
2766 t/argspec............ok
2767 t/argspec2...........ok
2768 t/attr-encoded.......ok
2769 t/callback...........ok
2770 t/case-sensitive.....ok
2771 t/cases..............ok
2772 t/comment............ok
2773 t/crashme............ok
2774 t/declaration........ok
2775 t/default............ok
2776 t/document...........ok
2777 t/dtext..............ok
2778 t/entities...........ok
2779 t/entities2..........ok
2780 t/filter-methods.....ok
2781 t/filter.............ok
2782 t/handler-eof........ok
2783 t/handler............ok
2784 t/headparser-http....ok
2785 1/1 skipped: Can't locate HTTP/Headers.pm in @INC (@INC contains: /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56/blib/lib /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56/blib/arch /etc/perl /usr/local/lib/perl/5.8.3 /usr/local/share/perl/5.8.3 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl . /etc/perl /usr/local/lib/perl/5.8.3 /usr/local/share/perl/5.8.3 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56/blib/lib/HTML/HeadParser.pm line 99.
2786 t/headparser.........ok
2787 t/ignore.............ok
2788 t/largetags..........ok
2789 t/linkextor-base.....ok
2790 t/linkextor-rel......ok
2791 t/magic..............ok
2792 t/marked-sect........ok
2793 t/msie-compat........ok
2794 t/offset.............ok
2795 t/options............ok
2796 t/parsefile..........ok
2797 t/parser.............ok
2798 t/plaintext..........ok
2799 t/pod................ok
2800 t/process............ok
2801 t/pullparser.........ok
2802 t/script.............ok
2803 t/skipped-text.......ok
2804 t/stack-realloc......ok
2805 t/textarea...........ok
2806 t/threads............ok
2807 t/tokeparser.........ok
2808 t/uentities..........ok
2809 t/unbroken-text......ok
2810 t/unicode-bom........ok
2811 t/unicode............ok
2812 t/xml-mode...........ok
2813 All tests successful, 1 subtest skipped.
2814 Files=48, Tests=438, 52 wallclock secs (47.47 cusr + 1.28 csys = 48.75 CPU)
2815 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56'
2820 /scratchbox/tools/bin/make install INSTALLDIRS=vendor PREFIX=/home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56/debian/libhtml-parser-perl/usr
2821 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56'
2822 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56/debian/libhtml-parser-perl/usr/lib/perl5/auto/HTML/Parser/Parser.so
2823 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56/debian/libhtml-parser-perl/usr/lib/perl5/auto/HTML/Parser/Parser.bs
2824 Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
2825 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56/debian/libhtml-parser-perl/usr/lib/perl5/HTML/LinkExtor.pm
2826 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56/debian/libhtml-parser-perl/usr/lib/perl5/HTML/HeadParser.pm
2827 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56/debian/libhtml-parser-perl/usr/lib/perl5/HTML/PullParser.pm
2828 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56/debian/libhtml-parser-perl/usr/lib/perl5/HTML/TokeParser.pm
2829 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56/debian/libhtml-parser-perl/usr/lib/perl5/HTML/Parser.pm
2830 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56/debian/libhtml-parser-perl/usr/lib/perl5/HTML/Entities.pm
2831 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56/debian/libhtml-parser-perl/usr/lib/perl5/HTML/Filter.pm
2832 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56/debian/libhtml-parser-perl/usr/share/man/man3/HTML::Entities.3pm
2833 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56/debian/libhtml-parser-perl/usr/share/man/man3/HTML::Parser.3pm
2834 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56/debian/libhtml-parser-perl/usr/share/man/man3/HTML::Filter.3pm
2835 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56/debian/libhtml-parser-perl/usr/share/man/man3/HTML::LinkExtor.3pm
2836 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56/debian/libhtml-parser-perl/usr/share/man/man3/HTML::TokeParser.3pm
2837 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56/debian/libhtml-parser-perl/usr/share/man/man3/HTML::PullParser.3pm
2838 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56/debian/libhtml-parser-perl/usr/share/man/man3/HTML::HeadParser.3pm
2839 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56'
2840 rm -rf debian/libhtml-parser-perl/usr/share/perl5
2845 dh_installexamples eg/hanchors eg/hform eg/hrefsub eg/hstrip eg/htext eg/htextsub eg/htitle
2846 dh_installchangelogs Changes
2856 dpkg-deb: building package `libhtml-parser-perl' in `../libhtml-parser-perl_3.56-1+lenny1_armel.deb'.
2858 dpkg-buildpackage: binary and diff upload (original source NOT included)
2859 Selecting previously deselected package libhtml-parser-perl.
2860 (Reading database ... 35224 files and directories currently installed.)
2861 Unpacking libhtml-parser-perl (from libhtml-parser-perl_3.56-1+lenny1_armel.deb) ...
2862 Setting up libhtml-parser-perl (3.56-1+lenny1) ...
2863 Desired=Unknown/Install/Remove/Purge/Hold
2864 | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
2865 |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
2866 ||/ Name Version Description
2867 +++-===================-==============-======================================================
2868 ii libhtml-parser-perl 3.56-1+lenny1 A collection of modules that parse HTML text documents
2870 dpkg-buildpackage: source package is libhtml-tree-perl
2871 dpkg-buildpackage: source version is 3.23-1
2872 dpkg-buildpackage: source changed by Krzysztof Krzyzaniak (eloy) <eloy@debian.org>
2873 dpkg-buildpackage: host architecture armel
2874 dpkg-buildpackage: source version without epoch 3.23-1
2877 if [ -e Makefile ]; then /scratchbox/tools/bin/make -i distclean; fi
2878 rm -f build-stamp configure-stamp
2880 dpkg-source: building libhtml-tree-perl using existing libhtml-tree-perl_3.23.orig.tar.gz
2881 dpkg-source: building libhtml-tree-perl in libhtml-tree-perl_3.23-1.diff.gz
2882 dpkg-source: building libhtml-tree-perl in libhtml-tree-perl_3.23-1.dsc
2884 /usr/bin/perl Makefile.PL INSTALLDIRS=vendor
2885 Checking if your kit is complete...
2887 Writing Makefile for HTML-Tree
2888 touch configure-stamp
2890 /scratchbox/tools/bin/make
2891 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23'
2892 cp lib/HTML/Element/traverse.pm blib/lib/HTML/Element/traverse.pm
2893 cp lib/HTML/Tree/AboutTrees.pod blib/lib/HTML/Tree/AboutTrees.pod
2894 cp lib/HTML/AsSubs.pm blib/lib/HTML/AsSubs.pm
2895 cp lib/HTML/Tree/AboutObjects.pod blib/lib/HTML/Tree/AboutObjects.pod
2896 cp lib/HTML/TreeBuilder.pm blib/lib/HTML/TreeBuilder.pm
2897 cp lib/HTML/Tree/Scanning.pod blib/lib/HTML/Tree/Scanning.pod
2898 cp lib/HTML/Element.pm blib/lib/HTML/Element.pm
2899 cp lib/HTML/Tree.pm blib/lib/HTML/Tree.pm
2900 cp lib/HTML/Parse.pm blib/lib/HTML/Parse.pm
2901 Manifying blib/man3/HTML::Tree::AboutTrees.3pm
2902 Manifying blib/man3/HTML::Element::traverse.3pm
2903 Manifying blib/man3/HTML::AsSubs.3pm
2904 Manifying blib/man3/HTML::Tree::AboutObjects.3pm
2905 Manifying blib/man3/HTML::TreeBuilder.3pm
2906 Manifying blib/man3/HTML::Tree::Scanning.3pm
2907 Manifying blib/man3/HTML::Element.3pm
2908 Manifying blib/man3/HTML::Tree.3pm
2909 Manifying blib/man3/HTML::Parse.3pm
2910 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23'
2911 /scratchbox/tools/bin/make test
2912 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23'
2913 PERL_DL_NONLAZY=1 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
2914 t/00system..........ok
2915 t/assubs............ok
2916 t/attributes........ok
2917 t/body..............ok
2918 t/building..........ok
2919 t/children..........ok
2920 t/clonei............ok
2921 t/construct_tree....ok
2922 t/doctype...........ok
2923 t/escape............ok
2924 t/oldparse..........ok
2925 t/parse.............ok
2926 t/parsefile.........ok
2927 t/pod...............ok
2928 t/split.............ok
2929 t/tag-rendering.....ok
2930 t/unicode...........ok
2931 All tests successful.
2932 Files=17, Tests=755, 30 wallclock secs (27.59 cusr + 0.65 csys = 28.24 CPU)
2933 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23'
2938 /scratchbox/tools/bin/make install INSTALLDIRS=vendor PREFIX=/home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23/debian/libhtml-tree-perl/usr
2939 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23'
2940 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23/debian/libhtml-tree-perl/usr/share/perl5/HTML/TreeBuilder.pm
2941 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23/debian/libhtml-tree-perl/usr/share/perl5/HTML/AsSubs.pm
2942 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23/debian/libhtml-tree-perl/usr/share/perl5/HTML/Parse.pm
2943 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23/debian/libhtml-tree-perl/usr/share/perl5/HTML/Element.pm
2944 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23/debian/libhtml-tree-perl/usr/share/perl5/HTML/Tree.pm
2945 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23/debian/libhtml-tree-perl/usr/share/perl5/HTML/Element/traverse.pm
2946 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23/debian/libhtml-tree-perl/usr/share/perl5/HTML/Tree/AboutObjects.pod
2947 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23/debian/libhtml-tree-perl/usr/share/perl5/HTML/Tree/Scanning.pod
2948 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23/debian/libhtml-tree-perl/usr/share/perl5/HTML/Tree/AboutTrees.pod
2949 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23/debian/libhtml-tree-perl/usr/share/man/man3/HTML::Element.3pm
2950 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23/debian/libhtml-tree-perl/usr/share/man/man3/HTML::Tree::AboutObjects.3pm
2951 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23/debian/libhtml-tree-perl/usr/share/man/man3/HTML::Tree.3pm
2952 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23/debian/libhtml-tree-perl/usr/share/man/man3/HTML::Tree::Scanning.3pm
2953 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23/debian/libhtml-tree-perl/usr/share/man/man3/HTML::Parse.3pm
2954 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23/debian/libhtml-tree-perl/usr/share/man/man3/HTML::Tree::AboutTrees.3pm
2955 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23/debian/libhtml-tree-perl/usr/share/man/man3/HTML::AsSubs.3pm
2956 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23/debian/libhtml-tree-perl/usr/share/man/man3/HTML::Element::traverse.3pm
2957 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23/debian/libhtml-tree-perl/usr/share/man/man3/HTML::TreeBuilder.3pm
2958 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23'
2959 rm -rf debian/libhtml-tree-perl/usr/lib
2962 dh_installdocs README TODO
2963 dh_installexamples htmltree
2964 dh_installchangelogs Changes
2972 dpkg-deb: building package `libhtml-tree-perl' in `../libhtml-tree-perl_3.23-1_all.deb'.
2974 dpkg-buildpackage: full upload (original source is included)
2975 Selecting previously deselected package libhtml-tree-perl.
2976 (Reading database ... 35256 files and directories currently installed.)
2977 Unpacking libhtml-tree-perl (from libhtml-tree-perl_3.23-1_all.deb) ...
2978 Setting up libhtml-tree-perl (3.23-1) ...
2979 Desired=Unknown/Install/Remove/Purge/Hold
2980 | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
2981 |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
2982 ||/ Name Version Description
2983 +++-=================-==============-============================================
2984 ii libhtml-tree-perl 3.23-1 represent and create HTML syntax trees
2986 dpkg-buildpackage: source package is libwww-perl
2987 dpkg-buildpackage: source version is 5.813-1
2988 dpkg-buildpackage: source changed by gregor herrmann <gregoa@debian.org>
2989 dpkg-buildpackage: host architecture armel
2990 dpkg-buildpackage: source version without epoch 5.813-1
2993 dh_clean build-stamp install-stamp
2994 [ ! -f Makefile ] || /scratchbox/tools/bin/make realclean
2995 dpkg-source: building libwww-perl using existing libwww-perl_5.813.orig.tar.gz
2996 dpkg-source: building libwww-perl in libwww-perl_5.813-1.diff.gz
2997 dpkg-source: building libwww-perl in libwww-perl_5.813-1.dsc
2999 /usr/bin/perl Makefile.PL INSTALLDIRS=vendor
3001 This package comes with some sample programs that I can try
3002 to install in /usr/bin.
3004 Note that you can avoid these questions by passing
3005 the '-n' option to 'Makefile.PL'.
3007 Do you want to install lwp-request? [y] y
3008 Do you want to install lwp-mirror? [y] y
3009 Do you want to install lwp-rget? [y] y
3010 Do you want to install lwp-download? [y] y
3012 The lwp-request program will use the name it is invoked with to
3013 determine what HTTP method to use. I can set up alias for the most
3014 common HTTP methods. These alias are also installed in
3017 Do you want to install the GET alias? [n] n
3018 Do you want to install the HEAD alias? [n] n
3019 Do you want to install the POST alias? [n] n
3021 Checking for URI........... ok
3022 Checking for HTML::Parser.. ok
3023 Checking for MIME::Base64.. ok
3024 Checking for Net::FTP...... ok
3025 Checking for Digest::MD5 .. ok
3027 Checking if your kit is complete...
3029 Writing Makefile for LWP
3030 /scratchbox/tools/bin/make
3031 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813'
3032 cp lib/LWP/RobotUA.pm blib/lib/LWP/RobotUA.pm
3033 cp lib/LWP/Authen/Ntlm.pm blib/lib/LWP/Authen/Ntlm.pm
3034 cp lib/LWP.pm blib/lib/LWP.pm
3035 cp lib/HTTP/Headers/ETag.pm blib/lib/HTTP/Headers/ETag.pm
3036 cp lib/LWP/Protocol.pm blib/lib/LWP/Protocol.pm
3037 cp lwptut.pod blib/lib/lwptut.pod
3038 cp lib/HTTP/Request/Common.pm blib/lib/HTTP/Request/Common.pm
3039 cp lib/HTTP/Message.pm blib/lib/HTTP/Message.pm
3040 cp lib/LWP/Protocol/ftp.pm blib/lib/LWP/Protocol/ftp.pm
3041 cp lib/HTML/Form.pm blib/lib/HTML/Form.pm
3042 cp lib/HTTP/Cookies/Netscape.pm blib/lib/HTTP/Cookies/Netscape.pm
3043 cp lib/LWP/Authen/Digest.pm blib/lib/LWP/Authen/Digest.pm
3044 cp lib/LWP/Protocol/gopher.pm blib/lib/LWP/Protocol/gopher.pm
3045 cp lib/Net/HTTP/NB.pm blib/lib/Net/HTTP/NB.pm
3046 cp lib/HTTP/Status.pm blib/lib/HTTP/Status.pm
3047 cp lib/LWP/Protocol/cpan.pm blib/lib/LWP/Protocol/cpan.pm
3048 cp lib/Net/HTTPS.pm blib/lib/Net/HTTPS.pm
3049 cp lib/HTTP/Headers/Util.pm blib/lib/HTTP/Headers/Util.pm
3050 cp lib/LWP/Authen/Basic.pm blib/lib/LWP/Authen/Basic.pm
3051 cp lib/HTTP/Cookies/Microsoft.pm blib/lib/HTTP/Cookies/Microsoft.pm
3052 cp lib/LWP/UserAgent.pm blib/lib/LWP/UserAgent.pm
3053 cp lib/LWP/Protocol/nntp.pm blib/lib/LWP/Protocol/nntp.pm
3054 cp lib/LWP/Protocol/loopback.pm blib/lib/LWP/Protocol/loopback.pm
3055 cp lib/LWP/Protocol/mailto.pm blib/lib/LWP/Protocol/mailto.pm
3056 cp lib/LWP/Protocol/http.pm blib/lib/LWP/Protocol/http.pm
3057 cp lib/LWP/Protocol/https10.pm blib/lib/LWP/Protocol/https10.pm
3058 cp lib/LWP/MemberMixin.pm blib/lib/LWP/MemberMixin.pm
3059 cp lib/HTTP/Headers/Auth.pm blib/lib/HTTP/Headers/Auth.pm
3060 cp lib/LWP/Debug.pm blib/lib/LWP/Debug.pm
3061 cp lib/Net/HTTP.pm blib/lib/Net/HTTP.pm
3062 cp lib/LWP/media.types blib/lib/LWP/media.types
3063 cp lib/HTTP/Daemon.pm blib/lib/HTTP/Daemon.pm
3064 cp lib/HTTP/Cookies.pm blib/lib/HTTP/Cookies.pm
3065 cp lib/LWP/ConnCache.pm blib/lib/LWP/ConnCache.pm
3066 cp lib/File/Listing.pm blib/lib/File/Listing.pm
3067 cp lib/WWW/RobotRules/AnyDBM_File.pm blib/lib/WWW/RobotRules/AnyDBM_File.pm
3068 cp lib/LWP/MediaTypes.pm blib/lib/LWP/MediaTypes.pm
3069 cp lwpcook.pod blib/lib/lwpcook.pod
3070 cp lib/HTTP/Date.pm blib/lib/HTTP/Date.pm
3071 cp lib/LWP/Protocol/http10.pm blib/lib/LWP/Protocol/http10.pm
3072 cp lib/LWP/Protocol/file.pm blib/lib/LWP/Protocol/file.pm
3073 cp lib/LWP/Protocol/GHTTP.pm blib/lib/LWP/Protocol/GHTTP.pm
3074 cp lib/LWP/DebugFile.pm blib/lib/LWP/DebugFile.pm
3075 cp lib/HTTP/Request.pm blib/lib/HTTP/Request.pm
3076 cp lib/HTTP/Negotiate.pm blib/lib/HTTP/Negotiate.pm
3077 cp lib/WWW/RobotRules.pm blib/lib/WWW/RobotRules.pm
3078 cp lib/LWP/Protocol/data.pm blib/lib/LWP/Protocol/data.pm
3079 cp lib/LWP/Protocol/nogo.pm blib/lib/LWP/Protocol/nogo.pm
3080 cp lib/HTTP/Response.pm blib/lib/HTTP/Response.pm
3081 cp lib/LWP/Simple.pm blib/lib/LWP/Simple.pm
3082 cp lib/HTTP/Headers.pm blib/lib/HTTP/Headers.pm
3083 cp lib/LWP/Protocol/https.pm blib/lib/LWP/Protocol/https.pm
3084 cp lib/Bundle/LWP.pm blib/lib/Bundle/LWP.pm
3085 cp lib/Net/HTTP/Methods.pm blib/lib/Net/HTTP/Methods.pm
3086 cp bin/lwp-mirror blib/script/lwp-mirror
3087 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/lwp-mirror
3088 cp bin/lwp-download blib/script/lwp-download
3089 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/lwp-download
3090 cp bin/lwp-rget blib/script/lwp-rget
3091 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/lwp-rget
3092 cp bin/lwp-request blib/script/lwp-request
3093 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/lwp-request
3094 Manifying blib/man1/lwp-mirror.1p
3095 Manifying blib/man1/lwp-download.1p
3096 Manifying blib/man1/lwp-rget.1p
3097 Manifying blib/man1/lwp-request.1p
3098 Manifying blib/man3/LWP::RobotUA.3pm
3099 Manifying blib/man3/LWP::Authen::Ntlm.3pm
3100 Manifying blib/man3/LWP.3pm
3101 Manifying blib/man3/LWP::Protocol.3pm
3102 Manifying blib/man3/HTTP::Request::Common.3pm
3103 Manifying blib/man3/lwptut.3pm
3104 Manifying blib/man3/HTTP::Message.3pm
3105 Manifying blib/man3/HTML::Form.3pm
3106 Manifying blib/man3/HTTP::Cookies::Netscape.3pm
3107 Manifying blib/man3/Net::HTTP::NB.3pm
3108 Manifying blib/man3/HTTP::Status.3pm
3109 Manifying blib/man3/HTTP::Headers::Util.3pm
3110 Manifying blib/man3/HTTP::Cookies::Microsoft.3pm
3111 Manifying blib/man3/LWP::UserAgent.3pm
3112 Manifying blib/man3/LWP::MemberMixin.3pm
3113 Manifying blib/man3/LWP::Debug.3pm
3114 Manifying blib/man3/Net::HTTP.3pm
3115 Manifying blib/man3/HTTP::Daemon.3pm
3116 Manifying blib/man3/HTTP::Cookies.3pm
3117 Manifying blib/man3/LWP::ConnCache.3pm
3118 Manifying blib/man3/File::Listing.3pm
3119 Manifying blib/man3/WWW::RobotRules::AnyDBM_File.3pm
3120 Manifying blib/man3/lwpcook.3pm
3121 Manifying blib/man3/LWP::MediaTypes.3pm
3122 Manifying blib/man3/HTTP::Date.3pm
3123 Manifying blib/man3/WWW::RobotRules.3pm
3124 Manifying blib/man3/HTTP::Negotiate.3pm
3125 Manifying blib/man3/HTTP::Request.3pm
3126 Manifying blib/man3/LWP::DebugFile.3pm
3127 Manifying blib/man3/HTTP::Response.3pm
3128 Manifying blib/man3/HTTP::Headers.3pm
3129 Manifying blib/man3/LWP::Simple.3pm
3130 Manifying blib/man3/Bundle::LWP.3pm
3131 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813'
3132 # Turn off the live checks
3133 if [ -f t/live/ENABLED ]; then rm t/live/ENABLED; fi
3134 if [ -f t/live/ZLIB_OK ]; then rm t/live/ZLIB_OK; fi
3135 /scratchbox/tools/bin/make test
3136 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813'
3137 /targets/FREMANTLE_ARMEL/usr/bin/perl t/TEST 0
3138 base/common-req...........ok
3139 base/cookies..............ok
3140 base/date.................ok
3141 base/headers-auth.........ok
3142 base/headers-etag.........ok
3143 base/headers-util.........ok
3144 base/headers..............ok
3145 base/http.................ok
3146 base/listing..............ok
3147 base/mediatypes...........ok
3148 base/message-old..........ok
3149 base/message-parts........ok
3150 base/message..............ok
3151 base/negotiate............ok
3152 base/protocols............ok
3153 base/response.............ok
3154 base/status...............ok
3155 base/ua...................ok
3156 html/form-maxlength.......ok
3157 html/form-multi-select....ok
3158 html/form-param...........ok
3159 html/form.................ok
3160 robot/rules-dbm...........ok
3161 robot/rules...............ok
3162 robot/ua-get..............ok
3163 robot/ua..................ok
3164 local/autoload-get........ok
3165 local/autoload............ok
3166 local/chunked.............ok
3167 local/get.................ok
3168 local/http-get............ok
3169 local/http................ok
3170 local/protosub............ok
3171 All tests successful.
3172 Files=33, Tests=835, 58 wallclock secs (34.60 cusr + 1.52 csys = 36.12 CPU)
3173 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813'
3178 /scratchbox/tools/bin/make install DESTDIR=/home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl PREFIX=/usr
3179 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813'
3180 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/lwptut.pod
3181 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP.pm
3182 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/lwpcook.pod
3183 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/File/Listing.pm
3184 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/HTTP/Headers.pm
3185 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/HTTP/Status.pm
3186 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/HTTP/Date.pm
3187 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/HTTP/Response.pm
3188 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/HTTP/Message.pm
3189 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/HTTP/Daemon.pm
3190 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/HTTP/Request.pm
3191 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/HTTP/Negotiate.pm
3192 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/HTTP/Cookies.pm
3193 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/HTTP/Cookies/Netscape.pm
3194 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/HTTP/Cookies/Microsoft.pm
3195 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/HTTP/Headers/ETag.pm
3196 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/HTTP/Headers/Auth.pm
3197 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/HTTP/Headers/Util.pm
3198 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/HTTP/Request/Common.pm
3199 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/HTML/Form.pm
3200 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/Bundle/LWP.pm
3201 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/Simple.pm
3202 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/DebugFile.pm
3203 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/MediaTypes.pm
3204 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/MemberMixin.pm
3205 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/UserAgent.pm
3206 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/media.types
3207 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/RobotUA.pm
3208 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/Protocol.pm
3209 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/Debug.pm
3210 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/ConnCache.pm
3211 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/Authen/Basic.pm
3212 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/Authen/Ntlm.pm
3213 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/Authen/Digest.pm
3214 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/Protocol/mailto.pm
3215 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/Protocol/cpan.pm
3216 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/Protocol/data.pm
3217 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/Protocol/nntp.pm
3218 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/Protocol/ftp.pm
3219 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/Protocol/http.pm
3220 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/Protocol/http10.pm
3221 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/Protocol/gopher.pm
3222 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/Protocol/file.pm
3223 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/Protocol/loopback.pm
3224 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/Protocol/https10.pm
3225 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/Protocol/https.pm
3226 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/Protocol/GHTTP.pm
3227 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/Protocol/nogo.pm
3228 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/Net/HTTPS.pm
3229 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/Net/HTTP.pm
3230 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/Net/HTTP/NB.pm
3231 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/Net/HTTP/Methods.pm
3232 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/WWW/RobotRules.pm
3233 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/WWW/RobotRules/AnyDBM_File.pm
3234 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man1/lwp-request.1p
3235 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man1/lwp-download.1p
3236 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man1/lwp-rget.1p
3237 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man1/lwp-mirror.1p
3238 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/HTTP::Request.3pm
3239 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/HTTP::Headers.3pm
3240 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/lwptut.3pm
3241 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/LWP::Authen::Ntlm.3pm
3242 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/HTML::Form.3pm
3243 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/LWP::Debug.3pm
3244 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/LWP::RobotUA.3pm
3245 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/LWP::ConnCache.3pm
3246 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/HTTP::Request::Common.3pm
3247 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/LWP::MediaTypes.3pm
3248 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/LWP::UserAgent.3pm
3249 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/File::Listing.3pm
3250 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/LWP::Simple.3pm
3251 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/LWP::Protocol.3pm
3252 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/WWW::RobotRules.3pm
3253 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/WWW::RobotRules::AnyDBM_File.3pm
3254 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/LWP.3pm
3255 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/HTTP::Message.3pm
3256 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/Net::HTTP.3pm
3257 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/HTTP::Date.3pm
3258 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/HTTP::Daemon.3pm
3259 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/HTTP::Response.3pm
3260 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/HTTP::Negotiate.3pm
3261 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/Net::HTTP::NB.3pm
3262 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/HTTP::Cookies::Microsoft.3pm
3263 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/HTTP::Headers::Util.3pm
3264 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/HTTP::Cookies::Netscape.3pm
3265 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/HTTP::Status.3pm
3266 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/LWP::DebugFile.3pm
3267 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/Bundle::LWP.3pm
3268 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/LWP::MemberMixin.3pm
3269 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/HTTP::Cookies.3pm
3270 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/lwpcook.3pm
3271 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/bin/lwp-rget
3272 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/bin/lwp-request
3273 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/bin/lwp-mirror
3274 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/bin/lwp-download
3275 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813'
3276 [ ! -d /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/lib/perl5 ] || \
3277 rmdir --ignore-fail-on-non-empty --parents --verbose \
3278 /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/lib/perl5
3282 dh_installdocs README README.SSL
3283 dh_installchangelogs Changes
3292 dpkg-deb: building package `libwww-perl' in `../libwww-perl_5.813-1_all.deb'.
3294 dpkg-buildpackage: full upload (original source is included)
3295 Selecting previously deselected package libwww-perl.
3296 (Reading database ... 35284 files and directories currently installed.)
3297 Unpacking libwww-perl (from libwww-perl_5.813-1_all.deb) ...
3298 Setting up libwww-perl (5.813-1) ...
3299 Desired=Unknown/Install/Remove/Purge/Hold
3300 | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
3301 |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
3302 ||/ Name Version Description
3303 +++-==============-==============-============================================
3304 ii libwww-perl 5.813-1 WWW client/server library for Perl (aka LWP)
3305 libwww-mechanize-perl
3306 dpkg-buildpackage: source package is libwww-mechanize-perl
3307 dpkg-buildpackage: source version is 1.34-2
3308 dpkg-buildpackage: source changed by Rene Mayorga <rmayorga@debian.org.sv>
3309 dpkg-buildpackage: host architecture armel
3310 dpkg-buildpackage: source version without epoch 1.34-2
3311 QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null pop -a -R || test $? = 2
3312 Removing patch adding_pod_see_also.patch
3313 Restoring lib/WWW/Mechanize/Image.pm
3314 Restoring lib/WWW/Mechanize/Cookbook.pod
3315 Restoring lib/WWW/Mechanize/Link.pm
3316 Restoring bin/mech-dump
3318 Removing patch no_internet.patch
3319 Restoring t/live/computers4sure.t
3320 Restoring t/live/wikipedia.t
3323 rm -rf .pc debian/stamp-patched
3326 dh_clean build-stamp install-stamp
3327 [ ! -f Makefile ] || /scratchbox/tools/bin/make realclean
3329 dpkg-source: building libwww-mechanize-perl using existing libwww-mechanize-perl_1.34.orig.tar.gz
3330 dpkg-source: building libwww-mechanize-perl in libwww-mechanize-perl_1.34-2.diff.gz
3331 dpkg-source: building libwww-mechanize-perl in libwww-mechanize-perl_1.34-2.dsc
3332 # quilt exits with 2 as return when there was nothing to do.
3333 # That's not an error here (but it's usefull to break loops in crude scripts)
3334 QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null push -a || test $? = 2
3335 Applying patch no_internet.patch
3336 patching file t/live/computers4sure.t
3337 patching file t/live/wikipedia.t
3339 Applying patch adding_pod_see_also.patch
3340 patching file bin/mech-dump
3341 patching file lib/WWW/Mechanize/Cookbook.pod
3342 patching file lib/WWW/Mechanize/Image.pm
3343 patching file lib/WWW/Mechanize/Link.pm
3345 Now at patch adding_pod_see_also.patch
3346 touch debian/stamp-patched
3348 # Add here commands to compile the package.
3349 /usr/bin/perl Makefile.PL verbose INSTALLDIRS=vendor --local --mech-dump
3350 mech-dump is always installed now. This option is deprecated.
3352 WWW::Mechanize likes to have a lot of test modules for some of its tests.
3353 The following are modules that would be nice to have, but not required.
3360 Checking if your kit is complete...
3362 ABSTRACT_FROM => q[lib/WWW/Mechanize.pm]
3363 AUTHOR => q[Andy Lester <andy@petdance.com>]
3364 EXE_FILES => [q[bin/mech-dump]]
3365 INSTALLDIRS => q[vendor]
3366 NAME => q[WWW::Mechanize]
3367 PREREQ_PM => { HTML::Form=>q[1.038], Getopt::Long=>q[0], URI=>q[1.25], Pod::Usage=>q[0], FindBin=>q[0], HTML::HeadParser=>q[0], HTTP::Status=>q[0], Carp=>q[0], Test::More=>q[0.34], LWP::UserAgent=>q[2.024], HTML::TokeParser=>q[2.28], URI::file=>q[0], File::Temp=>q[0], HTML::Parser=>q[3.33], URI::URL=>q[0], HTTP::Daemon=>q[0], HTTP::Request=>q[1.3], LWP=>q[5.802] }
3368 VERSION_FROM => q[lib/WWW/Mechanize.pm]
3369 clean => { FILES=>q[WWW-Mechanize-*] }
3370 test => { TESTS=>q[t/00-load.t t/add_header.t t/aliases.t t/area_link.t t/autocheck.t t/clone.t t/die.t t/field.t t/find_frame.t t/find_image.t t/find_inputs.t t/find_link-warnings.t t/find_link.t t/find_link_id.t t/form-parsing.t t/frames.t t/image-new.t t/image-parse.t t/link-base.t t/link-relative.t t/link.t t/new.t t/pod-coverage.t t/pod.t t/regex-error.t t/save_content.t t/select.t t/taint.t t/tick.t t/upload.t t/warn.t t/warnings.t t/local/back.t t/local/click.t t/local/click_button.t t/local/failure.t t/local/follow.t t/local/form.t t/local/get.t t/local/overload.t t/local/page_stack.t t/local/referer.t t/local/reload.t t/local/submit.t t/live/computers4sure.t t/live/wikipedia.t t/mech-dump/mech-dump.t] }
3371 Using PERL=/targets/FREMANTLE_ARMEL/usr/bin/perl
3372 Writing Makefile for WWW::Mechanize
3373 /scratchbox/tools/bin/make
3374 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34'
3375 cp lib/WWW/Mechanize/Examples.pod blib/lib/WWW/Mechanize/Examples.pod
3376 cp lib/WWW/Mechanize/Link.pm blib/lib/WWW/Mechanize/Link.pm
3377 cp lib/WWW/Mechanize/Image.pm blib/lib/WWW/Mechanize/Image.pm
3378 cp lib/WWW/Mechanize/FAQ.pod blib/lib/WWW/Mechanize/FAQ.pod
3379 cp lib/WWW/Mechanize/Cookbook.pod blib/lib/WWW/Mechanize/Cookbook.pod
3380 cp lib/WWW/Mechanize.pm blib/lib/WWW/Mechanize.pm
3381 cp bin/mech-dump blib/script/mech-dump
3382 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/mech-dump
3383 Manifying blib/man1/mech-dump.1p
3384 Manifying blib/man3/WWW::Mechanize::Link.3pm
3385 Manifying blib/man3/WWW::Mechanize::Examples.3pm
3386 Manifying blib/man3/WWW::Mechanize::Image.3pm
3387 Manifying blib/man3/WWW::Mechanize::Cookbook.3pm
3388 Manifying blib/man3/WWW::Mechanize::FAQ.3pm
3389 Manifying blib/man3/WWW::Mechanize.3pm
3390 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34'
3391 NOINTERNET=1 /scratchbox/tools/bin/make test
3392 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34'
3393 PERL_DL_NONLAZY=1 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/00-load.t t/add_header.t t/aliases.t t/area_link.t t/autocheck.t t/clone.t t/die.t t/field.t t/find_frame.t t/find_image.t t/find_inputs.t t/find_link-warnings.t t/find_link.t t/find_link_id.t t/form-parsing.t t/frames.t t/image-new.t t/image-parse.t t/link-base.t t/link-relative.t t/link.t t/new.t t/pod-coverage.t t/pod.t t/regex-error.t t/save_content.t t/select.t t/taint.t t/tick.t t/upload.t t/warn.t t/warnings.t t/local/back.t t/local/click.t t/local/click_button.t t/local/failure.t t/local/follow.t t/local/form.t t/local/get.t t/local/overload.t t/local/page_stack.t t/local/referer.t t/local/reload.t t/local/submit.t t/live/computers4sure.t t/live/wikipedia.t t/mech-dump/mech-dump.t
3394 t/00-load................ok
3395 t/add_header.............ok
3396 t/aliases................ok
3397 t/area_link..............ok
3398 4/9 skipped: Test::Memory::Cycle not installed
3399 t/autocheck..............skipped
3400 all skipped: Test::Exception required to test autocheck
3401 t/clone..................ok
3402 t/die....................skipped
3403 all skipped: Test::Exception required to test die
3404 t/field..................ok
3405 t/find_frame.............ok
3406 t/find_image.............ok
3407 t/find_inputs............ok
3408 t/find_link-warnings.....skipped
3409 all skipped: Test::Warn required to test t/find_link-warnings.t
3410 t/find_link..............ok
3411 t/find_link_id...........ok
3412 t/form-parsing...........ok
3413 t/frames.................ok
3414 t/image-new..............ok
3415 t/image-parse............ok
3416 t/link-base..............ok
3417 t/link-relative..........ok
3418 t/link...................ok
3419 t/live/computers4sure....skipped
3420 all skipped: We don't have internet here
3421 t/live/wikipedia.........skipped
3422 all skipped: We don't have internet here
3423 t/local/back.............ok
3424 2/38 skipped: Test::Memory::Cycle not installed
3425 t/local/click............ok
3426 t/local/click_button.....ok
3427 t/local/failure..........ok
3428 t/local/follow...........ok
3429 t/local/form.............ok
3430 t/local/get..............ok
3431 1/32 skipped: Test::Memory::Cycle not installed
3432 t/local/overload.........skipped
3433 all skipped: Mysteriously stopped passing, and I don't know why.
3434 t/local/page_stack.......ok
3435 t/local/referer..........ok
3436 1/13 skipped: Test::Memory::Cycle not installed
3437 t/local/reload...........ok
3438 1/14 skipped: Test::Memory::Cycle not installed
3439 t/local/submit...........ok
3440 1/13 skipped: Test::Memory::Cycle not installed
3441 t/mech-dump/mech-dump....ok
3442 t/new....................ok
3443 t/pod-coverage...........ok
3444 t/pod....................ok
3445 t/regex-error............skipped
3446 all skipped: Test::Warn required to test t/regex-error.t
3447 t/save_content...........ok
3448 t/select.................ok
3449 t/taint..................skipped
3450 all skipped: Test::Taint required for checking taintedness
3451 t/tick...................ok
3452 t/upload.................ok
3453 t/warn...................skipped
3454 all skipped: Test::Warn required to test warn
3455 t/warnings...............skipped
3456 all skipped: Test::Warn required to test warnings
3457 All tests successful, 10 tests and 10 subtests skipped.
3458 Files=47, Tests=463, 119 wallclock secs (99.10 cusr + 2.94 csys = 102.04 CPU)
3459 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34'
3464 /scratchbox/tools/bin/make install PREFIX=/home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34/debian/libwww-mechanize-perl/usr
3465 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34'
3466 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34/debian/libwww-mechanize-perl/usr/share/perl5/WWW/Mechanize.pm
3467 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34/debian/libwww-mechanize-perl/usr/share/perl5/WWW/Mechanize/FAQ.pod
3468 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34/debian/libwww-mechanize-perl/usr/share/perl5/WWW/Mechanize/Image.pm
3469 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34/debian/libwww-mechanize-perl/usr/share/perl5/WWW/Mechanize/Examples.pod
3470 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34/debian/libwww-mechanize-perl/usr/share/perl5/WWW/Mechanize/Cookbook.pod
3471 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34/debian/libwww-mechanize-perl/usr/share/perl5/WWW/Mechanize/Link.pm
3472 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34/debian/libwww-mechanize-perl/usr/share/man/man1/mech-dump.1p
3473 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34/debian/libwww-mechanize-perl/usr/share/man/man3/WWW::Mechanize.3pm
3474 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34/debian/libwww-mechanize-perl/usr/share/man/man3/WWW::Mechanize::Cookbook.3pm
3475 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34/debian/libwww-mechanize-perl/usr/share/man/man3/WWW::Mechanize::FAQ.3pm
3476 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34/debian/libwww-mechanize-perl/usr/share/man/man3/WWW::Mechanize::Image.3pm
3477 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34/debian/libwww-mechanize-perl/usr/share/man/man3/WWW::Mechanize::Link.3pm
3478 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34/debian/libwww-mechanize-perl/usr/share/man/man3/WWW::Mechanize::Examples.3pm
3479 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34/debian/libwww-mechanize-perl/usr/bin/mech-dump
3480 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34'
3481 install -d /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34/debian/libwww-mechanize-perl/usr/share/libwww-mechanize-perl
3482 install -m 644 /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34/etc/* /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34/debian/libwww-mechanize-perl/usr/share/libwww-mechanize-perl
3483 [ ! -d /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34/debian/libwww-mechanize-perl/usr/lib/perl5 ] || rmdir --ignore-fail-on-non-empty --parents --verbose /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34/debian/libwww-mechanize-perl/usr/lib/perl5
3488 dh_installchangelogs Changes
3496 dpkg-deb: building package `libwww-mechanize-perl' in `../libwww-mechanize-perl_1.34-2_all.deb'.
3498 dpkg-buildpackage: binary and diff upload (original source NOT included)
3499 Selecting previously deselected package libwww-mechanize-perl.
3500 (Reading database ... 35403 files and directories currently installed.)
3501 Unpacking libwww-mechanize-perl (from libwww-mechanize-perl_1.34-2_all.deb) ...
3502 Setting up libwww-mechanize-perl (1.34-2) ...
3503 Desired=Unknown/Install/Remove/Purge/Hold
3504 | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
3505 |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
3506 ||/ Name Version Description
3507 +++-=====================-==============-============================================
3508 ii libwww-mechanize-perl 1.34-2 Automate interaction with websites
3509 libemail-date-format-perl
3510 dpkg-buildpackage: source package is libemail-date-format-perl
3511 dpkg-buildpackage: source version is 1.002-1
3512 dpkg-buildpackage: source changed by Gunnar Wolf <gwolf@debian.org>
3513 dpkg-buildpackage: host architecture armel
3514 dpkg-buildpackage: source version without epoch 1.002-1
3517 dh_clean build-stamp install-stamp
3518 # Add commands to clean up after the build process here
3519 [ ! -f Makefile ] || /scratchbox/tools/bin/make realclean
3520 dpkg-source: building libemail-date-format-perl using existing libemail-date-format-perl_1.002.orig.tar.gz
3521 dpkg-source: building libemail-date-format-perl in libemail-date-format-perl_1.002-1.diff.gz
3522 dpkg-source: building libemail-date-format-perl in libemail-date-format-perl_1.002-1.dsc
3524 # As this is a architecture independent package, we are not
3525 # supposed to install stuff to /usr/lib. MakeMaker creates
3526 # the dirs, we prevent this by setting the INSTALLVENDORARCH
3527 # and VENDORARCHEXP environment variables.
3528 # Add commands to compile the package here
3529 /usr/bin/perl Makefile.PL INSTALLDIRS=vendor \
3530 INSTALLVENDORARCH=/usr/share/perl5/ \
3531 VENDORARCHEXP=/usr/share/perl5/
3532 Checking if your kit is complete...
3534 Writing Makefile for Email::Date::Format
3535 /scratchbox/tools/bin/make
3536 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libemail-date-format-perl/libemail-date-format-perl-1.002'
3537 cp lib/Email/Date/Format.pm blib/lib/Email/Date/Format.pm
3538 Manifying blib/man3/Email::Date::Format.3pm
3539 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libemail-date-format-perl/libemail-date-format-perl-1.002'
3540 /scratchbox/tools/bin/make test
3541 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libemail-date-format-perl/libemail-date-format-perl-1.002'
3542 PERL_DL_NONLAZY=1 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
3543 t/basic...........ok
3544 1/3 skipped: test only useful in US/Eastern, -0400, not +0100
3545 t/pod-coverage....ok
3546 t/pod.............ok
3547 All tests successful, 1 subtest skipped.
3548 Files=3, Tests=5, 3 wallclock secs ( 2.86 cusr + 0.09 csys = 2.95 CPU)
3549 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libemail-date-format-perl/libemail-date-format-perl-1.002'
3554 # Add commands to install the package into debian/ACKAGE_NAME here
3555 /scratchbox/tools/bin/make install DESTDIR=/home/maemo/workspace/git/dh-make-perl/dev/arm/libemail-date-format-perl/libemail-date-format-perl-1.002/debian/libemail-date-format-perl PREFIX=/usr
3556 make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libemail-date-format-perl/libemail-date-format-perl-1.002'
3557 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libemail-date-format-perl/libemail-date-format-perl-1.002/debian/libemail-date-format-perl/usr/share/perl5/Email/Date/Format.pm
3558 Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libemail-date-format-perl/libemail-date-format-perl-1.002/debian/libemail-date-format-perl/usr/share/man/man3/Email::Date::Format.3pm
3559 make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libemail-date-format-perl/libemail-date-format-perl-1.002'
3564 dh_installdocs README
3565 dh_installchangelogs Changes
3573 dpkg-deb: building package `libemail-date-format-perl' in `../libemail-date-format-perl_1.002-1_all.deb'.
3575 dpkg-buildpackage: full upload (original source is included)
3576 Selecting previously deselected package libemail-date-format-perl.
3577 (Reading database ... 35424 files and directories currently installed.)
3578 Unpacking libemail-date-format-perl (from libemail-date-format-perl_1.002-1_all.deb) ...
3579 Setting up libemail-date-format-perl (1.002-1) ...
3580 Desired=Unknown/Install/Remove/Purge/Hold
3581 | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
3582 |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
3583 ||/ Name Version Description
3584 +++-=========================-==============-==============================================
3585 ii libemail-date-format-perl 1.002-1 Module to generate RFC-2822-valid date strings
3587 dpkg-buildpackage: source package is dh-make-perl
3588 dpkg-buildpackage: source version is 0.47
3589 dpkg-buildpackage: source changed by Damyan Ivanov <dmn@debian.org>
3590 dpkg-buildpackage: host architecture armel
3591 dpkg-buildpackage: source version without epoch 0.47
3595 # Add here commands to clean up after the build process.
3596 dh_clean dh-make-perl.1
3597 dpkg-source: building dh-make-perl in dh-make-perl_0.47.tar.gz
3598 dpkg-source: building dh-make-perl in dh-make-perl_0.47.dsc
3600 # Add here commands to compile the package.
3601 pod2man --center debian dh-make-perl > dh-make-perl.1
3607 # Add here commands to install the package into debian/tmp.
3608 #/scratchbox/tools/bin/make install DESTDIR=`pwd`/debian/tmp
3609 mkdir -p /home/maemo/workspace/git/dh-make-perl/dev/arm/dh-make-perl/dh-make-perl-0.47/debian/dh-make-perl/usr/bin
3610 mkdir -p /home/maemo/workspace/git/dh-make-perl/dev/arm/dh-make-perl/dh-make-perl-0.47/debian/dh-make-perl/usr/share/dh-make-perl
3611 cp dh-make-perl /home/maemo/workspace/git/dh-make-perl/dev/arm/dh-make-perl/dh-make-perl-0.47/debian/dh-make-perl/usr/bin
3612 cp rules* /home/maemo/workspace/git/dh-make-perl/dev/arm/dh-make-perl/dh-make-perl-0.47/debian/dh-make-perl/usr/share/dh-make-perl
3613 cp overrides /home/maemo/workspace/git/dh-make-perl/dev/arm/dh-make-perl/dh-make-perl-0.47/debian/dh-make-perl/usr/share/dh-make-perl
3616 dh_installdocs README
3617 dh_installman dh-make-perl.1
3618 dh_installchangelogs
3626 dpkg-deb: building package `dh-make-perl' in `../dh-make-perl_0.47_all.deb'.
3628 dpkg-buildpackage: full upload; Debian-native package (full source is included)
3629 Selecting previously deselected package dh-make-perl.
3630 (Reading database ... 35433 files and directories currently installed.)
3631 Unpacking dh-make-perl (from dh-make-perl_0.47_all.deb) ...
3632 Setting up dh-make-perl (0.47) ...
3633 Desired=Unknown/Install/Remove/Purge/Hold
3634 | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
3635 |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
3636 ||/ Name Version Description
3637 +++-==============-==============-============================================
3638 ii dh-make-perl 0.47 Create Debian packages from perl modules