Break up vl.h.
[qemu] / hw / mpcore.c
1 /*
2  * ARM MPCore internal peripheral emulation.
3  *
4  * Copyright (c) 2006-2007 CodeSourcery.
5  * Written by Paul Brook
6  *
7  * This code is licenced under the GPL.
8  */
9
10 #include "hw.h"
11 #include "qemu-timer.h"
12 #include "primecell.h"
13
14 #define MPCORE_PRIV_BASE  0x10100000
15 #define NCPU 4
16 /* ??? The MPCore TRM says the on-chip controller has 224 external IRQ lines
17    (+ 32 internal).  However my test chip only exposes/reports 32.
18    More importantly Linux falls over if more than 32 are present!  */
19 #define GIC_NIRQ 64
20
21 static inline int
22 gic_get_current_cpu(void)
23 {
24   return cpu_single_env->cpu_index;
25 }
26
27 #include "arm_gic.c"
28
29 /* MPCore private memory region.  */
30
31 typedef struct {
32     uint32_t count;
33     uint32_t load;
34     uint32_t control;
35     uint32_t status;
36     uint32_t old_status;
37     int64_t tick;
38     QEMUTimer *timer;
39     struct mpcore_priv_state *mpcore;
40     int id; /* Encodes both timer/watchdog and CPU.  */
41 } mpcore_timer_state;
42
43 typedef struct mpcore_priv_state {
44     gic_state *gic;
45     uint32_t scu_control;
46     mpcore_timer_state timer[8];
47 } mpcore_priv_state;
48
49 /* Per-CPU Timers.  */
50
51 static inline void mpcore_timer_update_irq(mpcore_timer_state *s)
52 {
53     if (s->status & ~s->old_status) {
54         gic_set_pending_private(s->mpcore->gic, s->id >> 1, 29 + (s->id & 1));
55     }
56     s->old_status = s->status;
57 }
58
59 /* Return conversion factor from mpcore timer ticks to qemu timer ticks.  */
60 static inline uint32_t mpcore_timer_scale(mpcore_timer_state *s)
61 {
62     return (((s->control >> 8) & 0xff) + 1) * 10;
63 }
64
65 static void mpcore_timer_reload(mpcore_timer_state *s, int restart)
66 {
67     if (s->count == 0)
68         return;
69     if (restart)
70         s->tick = qemu_get_clock(vm_clock);
71     s->tick += (int64_t)s->count * mpcore_timer_scale(s);
72     qemu_mod_timer(s->timer, s->tick);
73 }
74
75 static void mpcore_timer_tick(void *opaque)
76 {
77     mpcore_timer_state *s = (mpcore_timer_state *)opaque;
78     s->status = 1;
79     if (s->control & 2) {
80         s->count = s->load;
81         mpcore_timer_reload(s, 0);
82     } else {
83         s->count = 0;
84     }
85     mpcore_timer_update_irq(s);
86 }
87
88 static uint32_t mpcore_timer_read(mpcore_timer_state *s, int offset)
89 {
90     int64_t val;
91     switch (offset) {
92     case 0: /* Load */
93         return s->load;
94         /* Fall through.  */
95     case 4: /* Counter.  */
96         if (((s->control & 1) == 0) || (s->count == 0))
97             return 0;
98         /* Slow and ugly, but hopefully won't happen too often.  */
99         val = s->tick - qemu_get_clock(vm_clock);
100         val /= mpcore_timer_scale(s);
101         if (val < 0)
102             val = 0;
103         return val;
104     case 8: /* Control.  */
105         return s->control;
106     case 12: /* Interrupt status.  */
107         return s->status;
108     }
109 }
110
111 static void mpcore_timer_write(mpcore_timer_state *s, int offset,
112                                uint32_t value)
113 {
114     int64_t old;
115     switch (offset) {
116     case 0: /* Load */
117         s->load = value;
118         /* Fall through.  */
119     case 4: /* Counter.  */
120         if ((s->control & 1) && s->count) {
121             /* Cancel the previous timer.  */
122             qemu_del_timer(s->timer);
123         }
124         s->count = value;
125         if (s->control & 1) {
126             mpcore_timer_reload(s, 1);
127         }
128         break;
129     case 8: /* Control.  */
130         old = s->control;
131         s->control = value;
132         if (((old & 1) == 0) && (value & 1)) {
133             if (s->count == 0 && (s->control & 2))
134                 s->count = s->load;
135             mpcore_timer_reload(s, 1);
136         }
137         break;
138     case 12: /* Interrupt status.  */
139         s->status &= ~value;
140         mpcore_timer_update_irq(s);
141         break;
142     }
143 }
144
145 static void mpcore_timer_init(mpcore_priv_state *mpcore,
146                               mpcore_timer_state *s, int id)
147 {
148     s->id = id;
149     s->mpcore = mpcore;
150     s->timer = qemu_new_timer(vm_clock, mpcore_timer_tick, s);
151 }
152
153
154 /* Per-CPU private memory mapped IO.  */
155
156 static uint32_t mpcore_priv_read(void *opaque, target_phys_addr_t offset)
157 {
158     mpcore_priv_state *s = (mpcore_priv_state *)opaque;
159     int id;
160     offset &= 0xfff;
161     if (offset < 0x100) {
162         /* SCU */
163         switch (offset) {
164         case 0x00: /* Control.  */
165             return s->scu_control;
166         case 0x04: /* Configuration.  */
167             return 0xf3;
168         case 0x08: /* CPU status.  */
169             return 0;
170         case 0x0c: /* Invalidate all.  */
171             return 0;
172         default:
173             goto bad_reg;
174         }
175     } else if (offset < 0x600) {
176         /* Interrupt controller.  */
177         if (offset < 0x200) {
178             id = gic_get_current_cpu();
179         } else {
180             id = (offset - 0x200) >> 8;
181         }
182         return gic_cpu_read(s->gic, id, offset & 0xff);
183     } else if (offset < 0xb00) {
184         /* Timers.  */
185         if (offset < 0x700) {
186             id = gic_get_current_cpu();
187         } else {
188             id = (offset - 0x700) >> 8;
189         }
190         id <<= 1;
191         if (offset & 0x20)
192           id++;
193         return mpcore_timer_read(&s->timer[id], offset & 0xf);
194     }
195 bad_reg:
196     cpu_abort(cpu_single_env, "mpcore_priv_read: Bad offset %x\n",
197               (int)offset);
198     return 0;
199 }
200
201 static void mpcore_priv_write(void *opaque, target_phys_addr_t offset,
202                           uint32_t value)
203 {
204     mpcore_priv_state *s = (mpcore_priv_state *)opaque;
205     int id;
206     offset &= 0xfff;
207     if (offset < 0x100) {
208         /* SCU */
209         switch (offset) {
210         case 0: /* Control register.  */
211             s->scu_control = value & 1;
212             break;
213         case 0x0c: /* Invalidate all.  */
214             /* This is a no-op as cache is not emulated.  */
215             break;
216         default:
217             goto bad_reg;
218         }
219     } else if (offset < 0x600) {
220         /* Interrupt controller.  */
221         if (offset < 0x200) {
222             id = gic_get_current_cpu();
223         } else {
224             id = (offset - 0x200) >> 8;
225         }
226         gic_cpu_write(s->gic, id, offset & 0xff, value);
227     } else if (offset < 0xb00) {
228         /* Timers.  */
229         if (offset < 0x700) {
230             id = gic_get_current_cpu();
231         } else {
232             id = (offset - 0x700) >> 8;
233         }
234         id <<= 1;
235         if (offset & 0x20)
236           id++;
237         mpcore_timer_write(&s->timer[id], offset & 0xf, value);
238         return;
239     }
240     return;
241 bad_reg:
242     cpu_abort(cpu_single_env, "mpcore_priv_read: Bad offset %x\n",
243               (int)offset);
244 }
245
246 static CPUReadMemoryFunc *mpcore_priv_readfn[] = {
247    mpcore_priv_read,
248    mpcore_priv_read,
249    mpcore_priv_read
250 };
251
252 static CPUWriteMemoryFunc *mpcore_priv_writefn[] = {
253    mpcore_priv_write,
254    mpcore_priv_write,
255    mpcore_priv_write
256 };
257
258
259 static qemu_irq *mpcore_priv_init(uint32_t base, qemu_irq *pic_irq)
260 {
261     mpcore_priv_state *s;
262     int iomemtype;
263     int i;
264
265     s = (mpcore_priv_state *)qemu_mallocz(sizeof(mpcore_priv_state));
266     if (!s)
267         return NULL;
268     s->gic = gic_init(base, pic_irq);
269     if (!s->gic)
270         return NULL;
271     iomemtype = cpu_register_io_memory(0, mpcore_priv_readfn,
272                                        mpcore_priv_writefn, s);
273     cpu_register_physical_memory(base, 0x00001000, iomemtype);
274     for (i = 0; i < 8; i++) {
275         mpcore_timer_init(s, &s->timer[i], i);
276     }
277     return s->gic->in;
278 }
279
280 /* Dummy PIC to route IRQ lines.  The baseboard has 4 independent IRQ
281    controllers.  The output of these, plus some of the raw input lines
282    are fed into a single SMP-aware interrupt controller on the CPU.  */
283 typedef struct {
284     qemu_irq *cpuic;
285     qemu_irq *rvic[4];
286 } mpcore_rirq_state;
287
288 /* Map baseboard IRQs onto CPU IRQ lines.  */
289 static const int mpcore_irq_map[32] = {
290     -1, -1, -1, -1,  1,  2, -1, -1,
291     -1, -1,  6, -1,  4,  5, -1, -1,
292     -1, 14, 15,  0,  7,  8, -1, -1,
293     -1, -1, -1, -1,  9,  3, -1, -1,
294 };
295
296 static void mpcore_rirq_set_irq(void *opaque, int irq, int level)
297 {
298     mpcore_rirq_state *s = (mpcore_rirq_state *)opaque;
299     int i;
300
301     for (i = 0; i < 4; i++) {
302         qemu_set_irq(s->rvic[i][irq], level);
303     }
304     if (irq < 32) {
305         irq = mpcore_irq_map[irq];
306         if (irq >= 0) {
307             qemu_set_irq(s->cpuic[irq], level);
308         }
309     }
310 }
311
312 qemu_irq *mpcore_irq_init(qemu_irq *cpu_irq)
313 {
314     mpcore_rirq_state *s;
315     int n;
316
317     /* ??? IRQ routing is hardcoded to "normal" mode.  */
318     s = qemu_mallocz(sizeof(mpcore_rirq_state));
319     s->cpuic = mpcore_priv_init(MPCORE_PRIV_BASE, cpu_irq);
320     for (n = 0; n < 4; n++) {
321         s->rvic[n] = realview_gic_init(0x10040000 + n * 0x10000,
322                                        s->cpuic[10 + n]);
323     }
324     return qemu_allocate_irqs(mpcore_rirq_set_irq, s, 64);
325 }