Remove some uses of phys_ram_base (initial patch by Ian Jackson)
[qemu] / hw / pc.c
1 /*
2  * QEMU PC System Emulator
3  *
4  * Copyright (c) 2003-2004 Fabrice Bellard
5  *
6  * Permission is hereby granted, free of charge, to any person obtaining a copy
7  * of this software and associated documentation files (the "Software"), to deal
8  * in the Software without restriction, including without limitation the rights
9  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10  * copies of the Software, and to permit persons to whom the Software is
11  * furnished to do so, subject to the following conditions:
12  *
13  * The above copyright notice and this permission notice shall be included in
14  * all copies or substantial portions of the Software.
15  *
16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22  * THE SOFTWARE.
23  */
24 #include "hw.h"
25 #include "pc.h"
26 #include "fdc.h"
27 #include "pci.h"
28 #include "block.h"
29 #include "sysemu.h"
30 #include "audio/audio.h"
31 #include "net.h"
32 #include "smbus.h"
33 #include "boards.h"
34 #include "console.h"
35
36 /* output Bochs bios info messages */
37 //#define DEBUG_BIOS
38
39 #define BIOS_FILENAME "bios.bin"
40 #define VGABIOS_FILENAME "vgabios.bin"
41 #define VGABIOS_CIRRUS_FILENAME "vgabios-cirrus.bin"
42
43 #define PC_MAX_BIOS_SIZE (4 * 1024 * 1024)
44
45 /* Leave a chunk of memory at the top of RAM for the BIOS ACPI tables.  */
46 #define ACPI_DATA_SIZE       0x10000
47
48 #define MAX_IDE_BUS 2
49
50 static fdctrl_t *floppy_controller;
51 static RTCState *rtc_state;
52 static PITState *pit;
53 static IOAPICState *ioapic;
54 static PCIDevice *i440fx_state;
55
56 static void ioport80_write(void *opaque, uint32_t addr, uint32_t data)
57 {
58 }
59
60 /* MSDOS compatibility mode FPU exception support */
61 static qemu_irq ferr_irq;
62 /* XXX: add IGNNE support */
63 void cpu_set_ferr(CPUX86State *s)
64 {
65     qemu_irq_raise(ferr_irq);
66 }
67
68 static void ioportF0_write(void *opaque, uint32_t addr, uint32_t data)
69 {
70     qemu_irq_lower(ferr_irq);
71 }
72
73 /* TSC handling */
74 uint64_t cpu_get_tsc(CPUX86State *env)
75 {
76     /* Note: when using kqemu, it is more logical to return the host TSC
77        because kqemu does not trap the RDTSC instruction for
78        performance reasons */
79 #if USE_KQEMU
80     if (env->kqemu_enabled) {
81         return cpu_get_real_ticks();
82     } else
83 #endif
84     {
85         return cpu_get_ticks();
86     }
87 }
88
89 /* SMM support */
90 void cpu_smm_update(CPUState *env)
91 {
92     if (i440fx_state && env == first_cpu)
93         i440fx_set_smm(i440fx_state, (env->hflags >> HF_SMM_SHIFT) & 1);
94 }
95
96
97 /* IRQ handling */
98 int cpu_get_pic_interrupt(CPUState *env)
99 {
100     int intno;
101
102     intno = apic_get_interrupt(env);
103     if (intno >= 0) {
104         /* set irq request if a PIC irq is still pending */
105         /* XXX: improve that */
106         pic_update_irq(isa_pic);
107         return intno;
108     }
109     /* read the irq from the PIC */
110     if (!apic_accept_pic_intr(env))
111         return -1;
112
113     intno = pic_read_irq(isa_pic);
114     return intno;
115 }
116
117 static void pic_irq_request(void *opaque, int irq, int level)
118 {
119     CPUState *env = first_cpu;
120
121     if (!level)
122         return;
123
124     while (env) {
125         if (apic_accept_pic_intr(env))
126             apic_local_deliver(env, APIC_LINT0);
127         env = env->next_cpu;
128     }
129 }
130
131 /* PC cmos mappings */
132
133 #define REG_EQUIPMENT_BYTE          0x14
134
135 static int cmos_get_fd_drive_type(int fd0)
136 {
137     int val;
138
139     switch (fd0) {
140     case 0:
141         /* 1.44 Mb 3"5 drive */
142         val = 4;
143         break;
144     case 1:
145         /* 2.88 Mb 3"5 drive */
146         val = 5;
147         break;
148     case 2:
149         /* 1.2 Mb 5"5 drive */
150         val = 2;
151         break;
152     default:
153         val = 0;
154         break;
155     }
156     return val;
157 }
158
159 static void cmos_init_hd(int type_ofs, int info_ofs, BlockDriverState *hd)
160 {
161     RTCState *s = rtc_state;
162     int cylinders, heads, sectors;
163     bdrv_get_geometry_hint(hd, &cylinders, &heads, &sectors);
164     rtc_set_memory(s, type_ofs, 47);
165     rtc_set_memory(s, info_ofs, cylinders);
166     rtc_set_memory(s, info_ofs + 1, cylinders >> 8);
167     rtc_set_memory(s, info_ofs + 2, heads);
168     rtc_set_memory(s, info_ofs + 3, 0xff);
169     rtc_set_memory(s, info_ofs + 4, 0xff);
170     rtc_set_memory(s, info_ofs + 5, 0xc0 | ((heads > 8) << 3));
171     rtc_set_memory(s, info_ofs + 6, cylinders);
172     rtc_set_memory(s, info_ofs + 7, cylinders >> 8);
173     rtc_set_memory(s, info_ofs + 8, sectors);
174 }
175
176 /* convert boot_device letter to something recognizable by the bios */
177 static int boot_device2nibble(char boot_device)
178 {
179     switch(boot_device) {
180     case 'a':
181     case 'b':
182         return 0x01; /* floppy boot */
183     case 'c':
184         return 0x02; /* hard drive boot */
185     case 'd':
186         return 0x03; /* CD-ROM boot */
187     case 'n':
188         return 0x04; /* Network boot */
189     }
190     return 0;
191 }
192
193 /* copy/pasted from cmos_init, should be made a general function
194  and used there as well */
195 int pc_boot_set(const char *boot_device)
196 {
197 #define PC_MAX_BOOT_DEVICES 3
198     RTCState *s = rtc_state;
199     int nbds, bds[3] = { 0, };
200     int i;
201
202     nbds = strlen(boot_device);
203     if (nbds > PC_MAX_BOOT_DEVICES) {
204         term_printf("Too many boot devices for PC\n");
205         return(1);
206     }
207     for (i = 0; i < nbds; i++) {
208         bds[i] = boot_device2nibble(boot_device[i]);
209         if (bds[i] == 0) {
210             term_printf("Invalid boot device for PC: '%c'\n",
211                     boot_device[i]);
212             return(1);
213         }
214     }
215     rtc_set_memory(s, 0x3d, (bds[1] << 4) | bds[0]);
216     rtc_set_memory(s, 0x38, (bds[2] << 4));
217     return(0);
218 }
219
220 /* hd_table must contain 4 block drivers */
221 static void cmos_init(ram_addr_t ram_size, ram_addr_t above_4g_mem_size,
222                       const char *boot_device, BlockDriverState **hd_table)
223 {
224     RTCState *s = rtc_state;
225     int nbds, bds[3] = { 0, };
226     int val;
227     int fd0, fd1, nb;
228     int i;
229
230     /* various important CMOS locations needed by PC/Bochs bios */
231
232     /* memory size */
233     val = 640; /* base memory in K */
234     rtc_set_memory(s, 0x15, val);
235     rtc_set_memory(s, 0x16, val >> 8);
236
237     val = (ram_size / 1024) - 1024;
238     if (val > 65535)
239         val = 65535;
240     rtc_set_memory(s, 0x17, val);
241     rtc_set_memory(s, 0x18, val >> 8);
242     rtc_set_memory(s, 0x30, val);
243     rtc_set_memory(s, 0x31, val >> 8);
244
245     if (above_4g_mem_size) {
246         rtc_set_memory(s, 0x5b, (unsigned int)above_4g_mem_size >> 16);
247         rtc_set_memory(s, 0x5c, (unsigned int)above_4g_mem_size >> 24);
248         rtc_set_memory(s, 0x5d, (uint64_t)above_4g_mem_size >> 32);
249     }
250
251     if (ram_size > (16 * 1024 * 1024))
252         val = (ram_size / 65536) - ((16 * 1024 * 1024) / 65536);
253     else
254         val = 0;
255     if (val > 65535)
256         val = 65535;
257     rtc_set_memory(s, 0x34, val);
258     rtc_set_memory(s, 0x35, val >> 8);
259
260     /* set the number of CPU */
261     rtc_set_memory(s, 0x5f, smp_cpus - 1);
262
263     /* set boot devices, and disable floppy signature check if requested */
264 #define PC_MAX_BOOT_DEVICES 3
265     nbds = strlen(boot_device);
266     if (nbds > PC_MAX_BOOT_DEVICES) {
267         fprintf(stderr, "Too many boot devices for PC\n");
268         exit(1);
269     }
270     for (i = 0; i < nbds; i++) {
271         bds[i] = boot_device2nibble(boot_device[i]);
272         if (bds[i] == 0) {
273             fprintf(stderr, "Invalid boot device for PC: '%c'\n",
274                     boot_device[i]);
275             exit(1);
276         }
277     }
278     rtc_set_memory(s, 0x3d, (bds[1] << 4) | bds[0]);
279     rtc_set_memory(s, 0x38, (bds[2] << 4) | (fd_bootchk ?  0x0 : 0x1));
280
281     /* floppy type */
282
283     fd0 = fdctrl_get_drive_type(floppy_controller, 0);
284     fd1 = fdctrl_get_drive_type(floppy_controller, 1);
285
286     val = (cmos_get_fd_drive_type(fd0) << 4) | cmos_get_fd_drive_type(fd1);
287     rtc_set_memory(s, 0x10, val);
288
289     val = 0;
290     nb = 0;
291     if (fd0 < 3)
292         nb++;
293     if (fd1 < 3)
294         nb++;
295     switch (nb) {
296     case 0:
297         break;
298     case 1:
299         val |= 0x01; /* 1 drive, ready for boot */
300         break;
301     case 2:
302         val |= 0x41; /* 2 drives, ready for boot */
303         break;
304     }
305     val |= 0x02; /* FPU is there */
306     val |= 0x04; /* PS/2 mouse installed */
307     rtc_set_memory(s, REG_EQUIPMENT_BYTE, val);
308
309     /* hard drives */
310
311     rtc_set_memory(s, 0x12, (hd_table[0] ? 0xf0 : 0) | (hd_table[1] ? 0x0f : 0));
312     if (hd_table[0])
313         cmos_init_hd(0x19, 0x1b, hd_table[0]);
314     if (hd_table[1])
315         cmos_init_hd(0x1a, 0x24, hd_table[1]);
316
317     val = 0;
318     for (i = 0; i < 4; i++) {
319         if (hd_table[i]) {
320             int cylinders, heads, sectors, translation;
321             /* NOTE: bdrv_get_geometry_hint() returns the physical
322                 geometry.  It is always such that: 1 <= sects <= 63, 1
323                 <= heads <= 16, 1 <= cylinders <= 16383. The BIOS
324                 geometry can be different if a translation is done. */
325             translation = bdrv_get_translation_hint(hd_table[i]);
326             if (translation == BIOS_ATA_TRANSLATION_AUTO) {
327                 bdrv_get_geometry_hint(hd_table[i], &cylinders, &heads, &sectors);
328                 if (cylinders <= 1024 && heads <= 16 && sectors <= 63) {
329                     /* No translation. */
330                     translation = 0;
331                 } else {
332                     /* LBA translation. */
333                     translation = 1;
334                 }
335             } else {
336                 translation--;
337             }
338             val |= translation << (i * 2);
339         }
340     }
341     rtc_set_memory(s, 0x39, val);
342 }
343
344 void ioport_set_a20(int enable)
345 {
346     /* XXX: send to all CPUs ? */
347     cpu_x86_set_a20(first_cpu, enable);
348 }
349
350 int ioport_get_a20(void)
351 {
352     return ((first_cpu->a20_mask >> 20) & 1);
353 }
354
355 static void ioport92_write(void *opaque, uint32_t addr, uint32_t val)
356 {
357     ioport_set_a20((val >> 1) & 1);
358     /* XXX: bit 0 is fast reset */
359 }
360
361 static uint32_t ioport92_read(void *opaque, uint32_t addr)
362 {
363     return ioport_get_a20() << 1;
364 }
365
366 /***********************************************************/
367 /* Bochs BIOS debug ports */
368
369 static void bochs_bios_write(void *opaque, uint32_t addr, uint32_t val)
370 {
371     static const char shutdown_str[8] = "Shutdown";
372     static int shutdown_index = 0;
373
374     switch(addr) {
375         /* Bochs BIOS messages */
376     case 0x400:
377     case 0x401:
378         fprintf(stderr, "BIOS panic at rombios.c, line %d\n", val);
379         exit(1);
380     case 0x402:
381     case 0x403:
382 #ifdef DEBUG_BIOS
383         fprintf(stderr, "%c", val);
384 #endif
385         break;
386     case 0x8900:
387         /* same as Bochs power off */
388         if (val == shutdown_str[shutdown_index]) {
389             shutdown_index++;
390             if (shutdown_index == 8) {
391                 shutdown_index = 0;
392                 qemu_system_shutdown_request();
393             }
394         } else {
395             shutdown_index = 0;
396         }
397         break;
398
399         /* LGPL'ed VGA BIOS messages */
400     case 0x501:
401     case 0x502:
402         fprintf(stderr, "VGA BIOS panic, line %d\n", val);
403         exit(1);
404     case 0x500:
405     case 0x503:
406 #ifdef DEBUG_BIOS
407         fprintf(stderr, "%c", val);
408 #endif
409         break;
410     }
411 }
412
413 static void bochs_bios_init(void)
414 {
415     register_ioport_write(0x400, 1, 2, bochs_bios_write, NULL);
416     register_ioport_write(0x401, 1, 2, bochs_bios_write, NULL);
417     register_ioport_write(0x402, 1, 1, bochs_bios_write, NULL);
418     register_ioport_write(0x403, 1, 1, bochs_bios_write, NULL);
419     register_ioport_write(0x8900, 1, 1, bochs_bios_write, NULL);
420
421     register_ioport_write(0x501, 1, 2, bochs_bios_write, NULL);
422     register_ioport_write(0x502, 1, 2, bochs_bios_write, NULL);
423     register_ioport_write(0x500, 1, 1, bochs_bios_write, NULL);
424     register_ioport_write(0x503, 1, 1, bochs_bios_write, NULL);
425 }
426
427 /* Generate an initial boot sector which sets state and jump to
428    a specified vector */
429 static void generate_bootsect(uint32_t gpr[8], uint16_t segs[6], uint16_t ip)
430 {
431     uint8_t bootsect[512], *p;
432     int i;
433     int hda;
434
435     hda = drive_get_index(IF_IDE, 0, 0);
436     if (hda == -1) {
437         fprintf(stderr, "A disk image must be given for 'hda' when booting "
438                 "a Linux kernel\n");
439         exit(1);
440     }
441
442     memset(bootsect, 0, sizeof(bootsect));
443
444     /* Copy the MSDOS partition table if possible */
445     bdrv_read(drives_table[hda].bdrv, 0, bootsect, 1);
446
447     /* Make sure we have a partition signature */
448     bootsect[510] = 0x55;
449     bootsect[511] = 0xaa;
450
451     /* Actual code */
452     p = bootsect;
453     *p++ = 0xfa;                /* CLI */
454     *p++ = 0xfc;                /* CLD */
455
456     for (i = 0; i < 6; i++) {
457         if (i == 1)             /* Skip CS */
458             continue;
459
460         *p++ = 0xb8;            /* MOV AX,imm16 */
461         *p++ = segs[i];
462         *p++ = segs[i] >> 8;
463         *p++ = 0x8e;            /* MOV <seg>,AX */
464         *p++ = 0xc0 + (i << 3);
465     }
466
467     for (i = 0; i < 8; i++) {
468         *p++ = 0x66;            /* 32-bit operand size */
469         *p++ = 0xb8 + i;        /* MOV <reg>,imm32 */
470         *p++ = gpr[i];
471         *p++ = gpr[i] >> 8;
472         *p++ = gpr[i] >> 16;
473         *p++ = gpr[i] >> 24;
474     }
475
476     *p++ = 0xea;                /* JMP FAR */
477     *p++ = ip;                  /* IP */
478     *p++ = ip >> 8;
479     *p++ = segs[1];             /* CS */
480     *p++ = segs[1] >> 8;
481
482     bdrv_set_boot_sector(drives_table[hda].bdrv, bootsect, sizeof(bootsect));
483 }
484
485 static long get_file_size(FILE *f)
486 {
487     long where, size;
488
489     /* XXX: on Unix systems, using fstat() probably makes more sense */
490
491     where = ftell(f);
492     fseek(f, 0, SEEK_END);
493     size = ftell(f);
494     fseek(f, where, SEEK_SET);
495
496     return size;
497 }
498
499 static void load_linux(const char *kernel_filename,
500                        const char *initrd_filename,
501                        const char *kernel_cmdline)
502 {
503     uint16_t protocol;
504     uint32_t gpr[8];
505     uint16_t seg[6];
506     uint16_t real_seg;
507     int setup_size, kernel_size, initrd_size, cmdline_size;
508     uint32_t initrd_max;
509     uint8_t header[1024];
510     target_phys_addr_t real_addr, prot_addr, cmdline_addr, initrd_addr;
511     FILE *f, *fi;
512
513     /* Align to 16 bytes as a paranoia measure */
514     cmdline_size = (strlen(kernel_cmdline)+16) & ~15;
515
516     /* load the kernel header */
517     f = fopen(kernel_filename, "rb");
518     if (!f || !(kernel_size = get_file_size(f)) ||
519         fread(header, 1, 1024, f) != 1024) {
520         fprintf(stderr, "qemu: could not load kernel '%s'\n",
521                 kernel_filename);
522         exit(1);
523     }
524
525     /* kernel protocol version */
526 #if 0
527     fprintf(stderr, "header magic: %#x\n", ldl_p(header+0x202));
528 #endif
529     if (ldl_p(header+0x202) == 0x53726448)
530         protocol = lduw_p(header+0x206);
531     else
532         protocol = 0;
533
534     if (protocol < 0x200 || !(header[0x211] & 0x01)) {
535         /* Low kernel */
536         real_addr    = 0x90000;
537         cmdline_addr = 0x9a000 - cmdline_size;
538         prot_addr    = 0x10000;
539     } else if (protocol < 0x202) {
540         /* High but ancient kernel */
541         real_addr    = 0x90000;
542         cmdline_addr = 0x9a000 - cmdline_size;
543         prot_addr    = 0x100000;
544     } else {
545         /* High and recent kernel */
546         real_addr    = 0x10000;
547         cmdline_addr = 0x20000;
548         prot_addr    = 0x100000;
549     }
550
551 #if 0
552     fprintf(stderr,
553             "qemu: real_addr     = %#zx\n"
554             "qemu: cmdline_addr  = %#zx\n"
555             "qemu: prot_addr     = %#zx\n",
556             real_addr,
557             cmdline_addr,
558             prot_addr);
559 #endif
560
561     /* highest address for loading the initrd */
562     if (protocol >= 0x203)
563         initrd_max = ldl_p(header+0x22c);
564     else
565         initrd_max = 0x37ffffff;
566
567     if (initrd_max >= ram_size-ACPI_DATA_SIZE)
568         initrd_max = ram_size-ACPI_DATA_SIZE-1;
569
570     /* kernel command line */
571     pstrcpy_targphys(cmdline_addr, 4096, kernel_cmdline);
572
573     if (protocol >= 0x202) {
574         stl_p(header+0x228, cmdline_addr);
575     } else {
576         stw_p(header+0x20, 0xA33F);
577         stw_p(header+0x22, cmdline_addr-real_addr);
578     }
579
580     /* loader type */
581     /* High nybble = B reserved for Qemu; low nybble is revision number.
582        If this code is substantially changed, you may want to consider
583        incrementing the revision. */
584     if (protocol >= 0x200)
585         header[0x210] = 0xB0;
586
587     /* heap */
588     if (protocol >= 0x201) {
589         header[0x211] |= 0x80;  /* CAN_USE_HEAP */
590         stw_p(header+0x224, cmdline_addr-real_addr-0x200);
591     }
592
593     /* load initrd */
594     if (initrd_filename) {
595         if (protocol < 0x200) {
596             fprintf(stderr, "qemu: linux kernel too old to load a ram disk\n");
597             exit(1);
598         }
599
600         fi = fopen(initrd_filename, "rb");
601         if (!fi) {
602             fprintf(stderr, "qemu: could not load initial ram disk '%s'\n",
603                     initrd_filename);
604             exit(1);
605         }
606
607         initrd_size = get_file_size(fi);
608         initrd_addr = (initrd_max-initrd_size) & ~4095;
609
610         fprintf(stderr, "qemu: loading initrd (%#x bytes) at %#zx\n",
611                 initrd_size, initrd_addr);
612
613         if (!fread_targphys_ok(initrd_addr, initrd_size, fi)) {
614             fprintf(stderr, "qemu: read error on initial ram disk '%s'\n",
615                     initrd_filename);
616             exit(1);
617         }
618         fclose(fi);
619
620         stl_p(header+0x218, initrd_addr);
621         stl_p(header+0x21c, initrd_size);
622     }
623
624     /* store the finalized header and load the rest of the kernel */
625     cpu_physical_memory_write(real_addr, header, 1024);
626
627     setup_size = header[0x1f1];
628     if (setup_size == 0)
629         setup_size = 4;
630
631     setup_size = (setup_size+1)*512;
632     kernel_size -= setup_size;  /* Size of protected-mode code */
633
634     if (!fread_targphys_ok(real_addr+1024, setup_size-1024, f) ||
635         !fread_targphys_ok(prot_addr, kernel_size, f)) {
636         fprintf(stderr, "qemu: read error on kernel '%s'\n",
637                 kernel_filename);
638         exit(1);
639     }
640     fclose(f);
641
642     /* generate bootsector to set up the initial register state */
643     real_seg = real_addr >> 4;
644     seg[0] = seg[2] = seg[3] = seg[4] = seg[4] = real_seg;
645     seg[1] = real_seg+0x20;     /* CS */
646     memset(gpr, 0, sizeof gpr);
647     gpr[4] = cmdline_addr-real_addr-16; /* SP (-16 is paranoia) */
648
649     generate_bootsect(gpr, seg, 0);
650 }
651
652 static void main_cpu_reset(void *opaque)
653 {
654     CPUState *env = opaque;
655     cpu_reset(env);
656 }
657
658 static const int ide_iobase[2] = { 0x1f0, 0x170 };
659 static const int ide_iobase2[2] = { 0x3f6, 0x376 };
660 static const int ide_irq[2] = { 14, 15 };
661
662 #define NE2000_NB_MAX 6
663
664 static int ne2000_io[NE2000_NB_MAX] = { 0x300, 0x320, 0x340, 0x360, 0x280, 0x380 };
665 static int ne2000_irq[NE2000_NB_MAX] = { 9, 10, 11, 3, 4, 5 };
666
667 static int serial_io[MAX_SERIAL_PORTS] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 };
668 static int serial_irq[MAX_SERIAL_PORTS] = { 4, 3, 4, 3 };
669
670 static int parallel_io[MAX_PARALLEL_PORTS] = { 0x378, 0x278, 0x3bc };
671 static int parallel_irq[MAX_PARALLEL_PORTS] = { 7, 7, 7 };
672
673 #ifdef HAS_AUDIO
674 static void audio_init (PCIBus *pci_bus, qemu_irq *pic)
675 {
676     struct soundhw *c;
677     int audio_enabled = 0;
678
679     for (c = soundhw; !audio_enabled && c->name; ++c) {
680         audio_enabled = c->enabled;
681     }
682
683     if (audio_enabled) {
684         AudioState *s;
685
686         s = AUD_init ();
687         if (s) {
688             for (c = soundhw; c->name; ++c) {
689                 if (c->enabled) {
690                     if (c->isa) {
691                         c->init.init_isa (s, pic);
692                     }
693                     else {
694                         if (pci_bus) {
695                             c->init.init_pci (pci_bus, s);
696                         }
697                     }
698                 }
699             }
700         }
701     }
702 }
703 #endif
704
705 static void pc_init_ne2k_isa(NICInfo *nd, qemu_irq *pic)
706 {
707     static int nb_ne2k = 0;
708
709     if (nb_ne2k == NE2000_NB_MAX)
710         return;
711     isa_ne2000_init(ne2000_io[nb_ne2k], pic[ne2000_irq[nb_ne2k]], nd);
712     nb_ne2k++;
713 }
714
715 /* PC hardware initialisation */
716 static void pc_init1(ram_addr_t ram_size, int vga_ram_size,
717                      const char *boot_device, DisplayState *ds,
718                      const char *kernel_filename, const char *kernel_cmdline,
719                      const char *initrd_filename,
720                      int pci_enabled, const char *cpu_model)
721 {
722     char buf[1024];
723     int ret, linux_boot, i;
724     ram_addr_t ram_addr, vga_ram_addr, bios_offset, vga_bios_offset;
725     ram_addr_t below_4g_mem_size, above_4g_mem_size = 0;
726     int bios_size, isa_bios_size, vga_bios_size;
727     PCIBus *pci_bus;
728     int piix3_devfn = -1;
729     CPUState *env;
730     NICInfo *nd;
731     qemu_irq *cpu_irq;
732     qemu_irq *i8259;
733     int index;
734     BlockDriverState *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
735     BlockDriverState *fd[MAX_FD];
736
737     if (ram_size >= 0xe0000000 ) {
738         above_4g_mem_size = ram_size - 0xe0000000;
739         below_4g_mem_size = 0xe0000000;
740     } else {
741         below_4g_mem_size = ram_size;
742     }
743
744     qemu_register_boot_set(pc_boot_set);
745
746     linux_boot = (kernel_filename != NULL);
747
748     /* init CPUs */
749     if (cpu_model == NULL) {
750 #ifdef TARGET_X86_64
751         cpu_model = "qemu64";
752 #else
753         cpu_model = "qemu32";
754 #endif
755     }
756     
757     for(i = 0; i < smp_cpus; i++) {
758         env = cpu_init(cpu_model);
759         if (!env) {
760             fprintf(stderr, "Unable to find x86 CPU definition\n");
761             exit(1);
762         }
763         if (i != 0)
764             env->hflags |= HF_HALTED_MASK;
765         if (smp_cpus > 1) {
766             /* XXX: enable it in all cases */
767             env->cpuid_features |= CPUID_APIC;
768         }
769         register_savevm("cpu", i, 4, cpu_save, cpu_load, env);
770         qemu_register_reset(main_cpu_reset, env);
771         if (pci_enabled) {
772             apic_init(env);
773         }
774     }
775
776     vmport_init();
777
778     /* allocate RAM */
779     ram_addr = qemu_ram_alloc(ram_size);
780     cpu_register_physical_memory(0, below_4g_mem_size, ram_addr);
781
782     /* above 4giga memory allocation */
783     if (above_4g_mem_size > 0) {
784         cpu_register_physical_memory(0x100000000ULL, above_4g_mem_size,
785                                      ram_addr + below_4g_mem_size);
786     }
787
788     /* allocate VGA RAM */
789     vga_ram_addr = qemu_ram_alloc(vga_ram_size);
790
791     /* BIOS load */
792     if (bios_name == NULL)
793         bios_name = BIOS_FILENAME;
794     snprintf(buf, sizeof(buf), "%s/%s", bios_dir, bios_name);
795     bios_size = get_image_size(buf);
796     if (bios_size <= 0 ||
797         (bios_size % 65536) != 0) {
798         goto bios_error;
799     }
800     bios_offset = qemu_ram_alloc(bios_size);
801     ret = load_image(buf, phys_ram_base + bios_offset);
802     if (ret != bios_size) {
803     bios_error:
804         fprintf(stderr, "qemu: could not load PC BIOS '%s'\n", buf);
805         exit(1);
806     }
807
808     /* VGA BIOS load */
809     if (cirrus_vga_enabled) {
810         snprintf(buf, sizeof(buf), "%s/%s", bios_dir, VGABIOS_CIRRUS_FILENAME);
811     } else {
812         snprintf(buf, sizeof(buf), "%s/%s", bios_dir, VGABIOS_FILENAME);
813     }
814     vga_bios_size = get_image_size(buf);
815     if (vga_bios_size <= 0 || vga_bios_size > 65536)
816         goto vga_bios_error;
817     vga_bios_offset = qemu_ram_alloc(65536);
818
819     ret = load_image(buf, phys_ram_base + vga_bios_offset);
820     if (ret != vga_bios_size) {
821     vga_bios_error:
822         fprintf(stderr, "qemu: could not load VGA BIOS '%s'\n", buf);
823         exit(1);
824     }
825
826     /* setup basic memory access */
827     cpu_register_physical_memory(0xc0000, 0x10000,
828                                  vga_bios_offset | IO_MEM_ROM);
829
830     /* map the last 128KB of the BIOS in ISA space */
831     isa_bios_size = bios_size;
832     if (isa_bios_size > (128 * 1024))
833         isa_bios_size = 128 * 1024;
834     cpu_register_physical_memory(0xd0000, (192 * 1024) - isa_bios_size,
835                                  IO_MEM_UNASSIGNED);
836     cpu_register_physical_memory(0x100000 - isa_bios_size,
837                                  isa_bios_size,
838                                  (bios_offset + bios_size - isa_bios_size) | IO_MEM_ROM);
839
840     {
841         ram_addr_t option_rom_offset;
842         int size, offset;
843
844         offset = 0;
845         for (i = 0; i < nb_option_roms; i++) {
846             size = get_image_size(option_rom[i]);
847             if (size < 0) {
848                 fprintf(stderr, "Could not load option rom '%s'\n",
849                         option_rom[i]);
850                 exit(1);
851             }
852             if (size > (0x10000 - offset))
853                 goto option_rom_error;
854             option_rom_offset = qemu_ram_alloc(size);
855             ret = load_image(option_rom[i], phys_ram_base + option_rom_offset);
856             if (ret != size) {
857             option_rom_error:
858                 fprintf(stderr, "Too many option ROMS\n");
859                 exit(1);
860             }
861             size = (size + 4095) & ~4095;
862             cpu_register_physical_memory(0xd0000 + offset,
863                                          size, option_rom_offset | IO_MEM_ROM);
864             offset += size;
865         }
866     }
867
868     /* map all the bios at the top of memory */
869     cpu_register_physical_memory((uint32_t)(-bios_size),
870                                  bios_size, bios_offset | IO_MEM_ROM);
871
872     bochs_bios_init();
873
874     if (linux_boot)
875         load_linux(kernel_filename, initrd_filename, kernel_cmdline);
876
877     cpu_irq = qemu_allocate_irqs(pic_irq_request, NULL, 1);
878     i8259 = i8259_init(cpu_irq[0]);
879     ferr_irq = i8259[13];
880
881     if (pci_enabled) {
882         pci_bus = i440fx_init(&i440fx_state, i8259);
883         piix3_devfn = piix3_init(pci_bus, -1);
884     } else {
885         pci_bus = NULL;
886     }
887
888     /* init basic PC hardware */
889     register_ioport_write(0x80, 1, 1, ioport80_write, NULL);
890
891     register_ioport_write(0xf0, 1, 1, ioportF0_write, NULL);
892
893     if (cirrus_vga_enabled) {
894         if (pci_enabled) {
895             pci_cirrus_vga_init(pci_bus,
896                                 ds, phys_ram_base + vga_ram_addr,
897                                 vga_ram_addr, vga_ram_size);
898         } else {
899             isa_cirrus_vga_init(ds, phys_ram_base + vga_ram_addr,
900                                 vga_ram_addr, vga_ram_size);
901         }
902     } else if (vmsvga_enabled) {
903         if (pci_enabled)
904             pci_vmsvga_init(pci_bus, ds, phys_ram_base + vga_ram_addr,
905                             vga_ram_addr, vga_ram_size);
906         else
907             fprintf(stderr, "%s: vmware_vga: no PCI bus\n", __FUNCTION__);
908     } else {
909         if (pci_enabled) {
910             pci_vga_init(pci_bus, ds, phys_ram_base + vga_ram_addr,
911                          vga_ram_addr, vga_ram_size, 0, 0);
912         } else {
913             isa_vga_init(ds, phys_ram_base + vga_ram_addr,
914                          vga_ram_addr, vga_ram_size);
915         }
916     }
917
918     rtc_state = rtc_init(0x70, i8259[8]);
919
920     register_ioport_read(0x92, 1, 1, ioport92_read, NULL);
921     register_ioport_write(0x92, 1, 1, ioport92_write, NULL);
922
923     if (pci_enabled) {
924         ioapic = ioapic_init();
925     }
926     pit = pit_init(0x40, i8259[0]);
927     pcspk_init(pit);
928     if (pci_enabled) {
929         pic_set_alt_irq_func(isa_pic, ioapic_set_irq, ioapic);
930     }
931
932     for(i = 0; i < MAX_SERIAL_PORTS; i++) {
933         if (serial_hds[i]) {
934             serial_init(serial_io[i], i8259[serial_irq[i]], 115200,
935                         serial_hds[i]);
936         }
937     }
938
939     for(i = 0; i < MAX_PARALLEL_PORTS; i++) {
940         if (parallel_hds[i]) {
941             parallel_init(parallel_io[i], i8259[parallel_irq[i]],
942                           parallel_hds[i]);
943         }
944     }
945
946     for(i = 0; i < nb_nics; i++) {
947         nd = &nd_table[i];
948         if (!nd->model) {
949             if (pci_enabled) {
950                 nd->model = "ne2k_pci";
951             } else {
952                 nd->model = "ne2k_isa";
953             }
954         }
955         if (strcmp(nd->model, "ne2k_isa") == 0) {
956             pc_init_ne2k_isa(nd, i8259);
957         } else if (pci_enabled) {
958             if (strcmp(nd->model, "?") == 0)
959                 fprintf(stderr, "qemu: Supported ISA NICs: ne2k_isa\n");
960             pci_nic_init(pci_bus, nd, -1);
961         } else if (strcmp(nd->model, "?") == 0) {
962             fprintf(stderr, "qemu: Supported ISA NICs: ne2k_isa\n");
963             exit(1);
964         } else {
965             fprintf(stderr, "qemu: Unsupported NIC: %s\n", nd->model);
966             exit(1);
967         }
968     }
969
970     if (drive_get_max_bus(IF_IDE) >= MAX_IDE_BUS) {
971         fprintf(stderr, "qemu: too many IDE bus\n");
972         exit(1);
973     }
974
975     for(i = 0; i < MAX_IDE_BUS * MAX_IDE_DEVS; i++) {
976         index = drive_get_index(IF_IDE, i / MAX_IDE_DEVS, i % MAX_IDE_DEVS);
977         if (index != -1)
978             hd[i] = drives_table[index].bdrv;
979         else
980             hd[i] = NULL;
981     }
982
983     if (pci_enabled) {
984         pci_piix3_ide_init(pci_bus, hd, piix3_devfn + 1, i8259);
985     } else {
986         for(i = 0; i < MAX_IDE_BUS; i++) {
987             isa_ide_init(ide_iobase[i], ide_iobase2[i], i8259[ide_irq[i]],
988                          hd[MAX_IDE_DEVS * i], hd[MAX_IDE_DEVS * i + 1]);
989         }
990     }
991
992     i8042_init(i8259[1], i8259[12], 0x60);
993     DMA_init(0);
994 #ifdef HAS_AUDIO
995     audio_init(pci_enabled ? pci_bus : NULL, i8259);
996 #endif
997
998     for(i = 0; i < MAX_FD; i++) {
999         index = drive_get_index(IF_FLOPPY, 0, i);
1000         if (index != -1)
1001             fd[i] = drives_table[index].bdrv;
1002         else
1003             fd[i] = NULL;
1004     }
1005     floppy_controller = fdctrl_init(i8259[6], 2, 0, 0x3f0, fd);
1006
1007     cmos_init(below_4g_mem_size, above_4g_mem_size, boot_device, hd);
1008
1009     if (pci_enabled && usb_enabled) {
1010         usb_uhci_piix3_init(pci_bus, piix3_devfn + 2);
1011     }
1012
1013     if (pci_enabled && acpi_enabled) {
1014         uint8_t *eeprom_buf = qemu_mallocz(8 * 256); /* XXX: make this persistent */
1015         i2c_bus *smbus;
1016
1017         /* TODO: Populate SPD eeprom data.  */
1018         smbus = piix4_pm_init(pci_bus, piix3_devfn + 3, 0xb100, i8259[9]);
1019         for (i = 0; i < 8; i++) {
1020             smbus_eeprom_device_init(smbus, 0x50 + i, eeprom_buf + (i * 256));
1021         }
1022     }
1023
1024     if (i440fx_state) {
1025         i440fx_init_memory_mappings(i440fx_state);
1026     }
1027
1028     if (pci_enabled) {
1029         int max_bus;
1030         int bus, unit;
1031         void *scsi;
1032
1033         max_bus = drive_get_max_bus(IF_SCSI);
1034
1035         for (bus = 0; bus <= max_bus; bus++) {
1036             scsi = lsi_scsi_init(pci_bus, -1);
1037             for (unit = 0; unit < LSI_MAX_DEVS; unit++) {
1038                 index = drive_get_index(IF_SCSI, bus, unit);
1039                 if (index == -1)
1040                     continue;
1041                 lsi_scsi_attach(scsi, drives_table[index].bdrv, unit);
1042             }
1043         }
1044     }
1045 }
1046
1047 static void pc_init_pci(ram_addr_t ram_size, int vga_ram_size,
1048                         const char *boot_device, DisplayState *ds,
1049                         const char *kernel_filename,
1050                         const char *kernel_cmdline,
1051                         const char *initrd_filename,
1052                         const char *cpu_model)
1053 {
1054     pc_init1(ram_size, vga_ram_size, boot_device, ds,
1055              kernel_filename, kernel_cmdline,
1056              initrd_filename, 1, cpu_model);
1057 }
1058
1059 static void pc_init_isa(ram_addr_t ram_size, int vga_ram_size,
1060                         const char *boot_device, DisplayState *ds,
1061                         const char *kernel_filename,
1062                         const char *kernel_cmdline,
1063                         const char *initrd_filename,
1064                         const char *cpu_model)
1065 {
1066     pc_init1(ram_size, vga_ram_size, boot_device, ds,
1067              kernel_filename, kernel_cmdline,
1068              initrd_filename, 0, cpu_model);
1069 }
1070
1071 QEMUMachine pc_machine = {
1072     "pc",
1073     "Standard PC",
1074     pc_init_pci,
1075     VGA_RAM_SIZE + PC_MAX_BIOS_SIZE,
1076 };
1077
1078 QEMUMachine isapc_machine = {
1079     "isapc",
1080     "ISA-only PC",
1081     pc_init_isa,
1082     VGA_RAM_SIZE + PC_MAX_BIOS_SIZE,
1083 };