Add #defines needed by OpenSolaris, fix breakage by the #defines
[qemu] / hw / sparc32_dma.c
1 /*
2  * QEMU Sparc32 DMA controller emulation
3  *
4  * Copyright (c) 2006 Fabrice Bellard
5  *
6  * Permission is hereby granted, free of charge, to any person obtaining a copy
7  * of this software and associated documentation files (the "Software"), to deal
8  * in the Software without restriction, including without limitation the rights
9  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10  * copies of the Software, and to permit persons to whom the Software is
11  * furnished to do so, subject to the following conditions:
12  *
13  * The above copyright notice and this permission notice shall be included in
14  * all copies or substantial portions of the Software.
15  *
16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22  * THE SOFTWARE.
23  */
24
25 #include "hw.h"
26 #include "sparc32_dma.h"
27 #include "sun4m.h"
28 #include "sysbus.h"
29
30 /* debug DMA */
31 //#define DEBUG_DMA
32
33 /*
34  * This is the DMA controller part of chip STP2000 (Master I/O), also
35  * produced as NCR89C100. See
36  * http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/NCR89C100.txt
37  * and
38  * http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/DMA2.txt
39  */
40
41 #ifdef DEBUG_DMA
42 #define DPRINTF(fmt, ...)                               \
43     do { printf("DMA: " fmt , ## __VA_ARGS__); } while (0)
44 #else
45 #define DPRINTF(fmt, ...)
46 #endif
47
48 #define DMA_REGS 4
49 #define DMA_SIZE (4 * sizeof(uint32_t))
50 /* We need the mask, because one instance of the device is not page
51    aligned (ledma, start address 0x0010) */
52 #define DMA_MASK (DMA_SIZE - 1)
53
54 #define DMA_VER 0xa0000000
55 #define DMA_INTR 1
56 #define DMA_INTREN 0x10
57 #define DMA_WRITE_MEM 0x100
58 #define DMA_LOADED 0x04000000
59 #define DMA_DRAIN_FIFO 0x40
60 #define DMA_RESET 0x80
61
62 typedef struct DMAState DMAState;
63
64 struct DMAState {
65     SysBusDevice busdev;
66     uint32_t dmaregs[DMA_REGS];
67     qemu_irq irq;
68     void *iommu;
69     qemu_irq dev_reset;
70 };
71
72 /* Note: on sparc, the lance 16 bit bus is swapped */
73 void ledma_memory_read(void *opaque, target_phys_addr_t addr,
74                        uint8_t *buf, int len, int do_bswap)
75 {
76     DMAState *s = opaque;
77     int i;
78
79     DPRINTF("DMA write, direction: %c, addr 0x%8.8x\n",
80             s->dmaregs[0] & DMA_WRITE_MEM ? 'w': 'r', s->dmaregs[1]);
81     addr |= s->dmaregs[3];
82     if (do_bswap) {
83         sparc_iommu_memory_read(s->iommu, addr, buf, len);
84     } else {
85         addr &= ~1;
86         len &= ~1;
87         sparc_iommu_memory_read(s->iommu, addr, buf, len);
88         for(i = 0; i < len; i += 2) {
89             bswap16s((uint16_t *)(buf + i));
90         }
91     }
92 }
93
94 void ledma_memory_write(void *opaque, target_phys_addr_t addr,
95                         uint8_t *buf, int len, int do_bswap)
96 {
97     DMAState *s = opaque;
98     int l, i;
99     uint16_t tmp_buf[32];
100
101     DPRINTF("DMA read, direction: %c, addr 0x%8.8x\n",
102             s->dmaregs[0] & DMA_WRITE_MEM ? 'w': 'r', s->dmaregs[1]);
103     addr |= s->dmaregs[3];
104     if (do_bswap) {
105         sparc_iommu_memory_write(s->iommu, addr, buf, len);
106     } else {
107         addr &= ~1;
108         len &= ~1;
109         while (len > 0) {
110             l = len;
111             if (l > sizeof(tmp_buf))
112                 l = sizeof(tmp_buf);
113             for(i = 0; i < l; i += 2) {
114                 tmp_buf[i >> 1] = bswap16(*(uint16_t *)(buf + i));
115             }
116             sparc_iommu_memory_write(s->iommu, addr, (uint8_t *)tmp_buf, l);
117             len -= l;
118             buf += l;
119             addr += l;
120         }
121     }
122 }
123
124 static void dma_set_irq(void *opaque, int irq, int level)
125 {
126     DMAState *s = opaque;
127     if (level) {
128         DPRINTF("Raise IRQ\n");
129         s->dmaregs[0] |= DMA_INTR;
130         qemu_irq_raise(s->irq);
131     } else {
132         s->dmaregs[0] &= ~DMA_INTR;
133         DPRINTF("Lower IRQ\n");
134         qemu_irq_lower(s->irq);
135     }
136 }
137
138 void espdma_memory_read(void *opaque, uint8_t *buf, int len)
139 {
140     DMAState *s = opaque;
141
142     DPRINTF("DMA read, direction: %c, addr 0x%8.8x\n",
143             s->dmaregs[0] & DMA_WRITE_MEM ? 'w': 'r', s->dmaregs[1]);
144     sparc_iommu_memory_read(s->iommu, s->dmaregs[1], buf, len);
145     s->dmaregs[0] |= DMA_INTR;
146     s->dmaregs[1] += len;
147 }
148
149 void espdma_memory_write(void *opaque, uint8_t *buf, int len)
150 {
151     DMAState *s = opaque;
152
153     DPRINTF("DMA write, direction: %c, addr 0x%8.8x\n",
154             s->dmaregs[0] & DMA_WRITE_MEM ? 'w': 'r', s->dmaregs[1]);
155     sparc_iommu_memory_write(s->iommu, s->dmaregs[1], buf, len);
156     s->dmaregs[0] |= DMA_INTR;
157     s->dmaregs[1] += len;
158 }
159
160 static uint32_t dma_mem_readl(void *opaque, target_phys_addr_t addr)
161 {
162     DMAState *s = opaque;
163     uint32_t saddr;
164
165     saddr = (addr & DMA_MASK) >> 2;
166     DPRINTF("read dmareg " TARGET_FMT_plx ": 0x%8.8x\n", addr,
167             s->dmaregs[saddr]);
168
169     return s->dmaregs[saddr];
170 }
171
172 static void dma_mem_writel(void *opaque, target_phys_addr_t addr, uint32_t val)
173 {
174     DMAState *s = opaque;
175     uint32_t saddr;
176
177     saddr = (addr & DMA_MASK) >> 2;
178     DPRINTF("write dmareg " TARGET_FMT_plx ": 0x%8.8x -> 0x%8.8x\n", addr,
179             s->dmaregs[saddr], val);
180     switch (saddr) {
181     case 0:
182         if (!(val & DMA_INTREN)) {
183             DPRINTF("Lower IRQ\n");
184             qemu_irq_lower(s->irq);
185         }
186         if (val & DMA_RESET) {
187             qemu_irq_raise(s->dev_reset);
188             qemu_irq_lower(s->dev_reset);
189         } else if (val & DMA_DRAIN_FIFO) {
190             val &= ~DMA_DRAIN_FIFO;
191         } else if (val == 0)
192             val = DMA_DRAIN_FIFO;
193         val &= 0x0fffffff;
194         val |= DMA_VER;
195         break;
196     case 1:
197         s->dmaregs[0] |= DMA_LOADED;
198         break;
199     default:
200         break;
201     }
202     s->dmaregs[saddr] = val;
203 }
204
205 static CPUReadMemoryFunc * const dma_mem_read[3] = {
206     NULL,
207     NULL,
208     dma_mem_readl,
209 };
210
211 static CPUWriteMemoryFunc * const dma_mem_write[3] = {
212     NULL,
213     NULL,
214     dma_mem_writel,
215 };
216
217 static void dma_reset(void *opaque)
218 {
219     DMAState *s = opaque;
220
221     memset(s->dmaregs, 0, DMA_SIZE);
222     s->dmaregs[0] = DMA_VER;
223 }
224
225 static const VMStateDescription vmstate_dma = {
226     .name ="sparc32_dma",
227     .version_id = 2,
228     .minimum_version_id = 2,
229     .minimum_version_id_old = 2,
230     .fields      = (VMStateField []) {
231         VMSTATE_UINT32_ARRAY(dmaregs, DMAState, DMA_REGS),
232         VMSTATE_END_OF_LIST()
233     }
234 };
235
236 static int sparc32_dma_init1(SysBusDevice *dev)
237 {
238     DMAState *s = FROM_SYSBUS(DMAState, dev);
239     int dma_io_memory;
240
241     sysbus_init_irq(dev, &s->irq);
242
243     dma_io_memory = cpu_register_io_memory(dma_mem_read, dma_mem_write, s);
244     sysbus_init_mmio(dev, DMA_SIZE, dma_io_memory);
245
246     vmstate_register(-1, &vmstate_dma, s);
247     qemu_register_reset(dma_reset, s);
248
249     qdev_init_gpio_in(&dev->qdev, dma_set_irq, 1);
250     qdev_init_gpio_out(&dev->qdev, &s->dev_reset, 1);
251     return 0;
252 }
253
254 static SysBusDeviceInfo sparc32_dma_info = {
255     .init = sparc32_dma_init1,
256     .qdev.name  = "sparc32_dma",
257     .qdev.size  = sizeof(DMAState),
258     .qdev.props = (Property[]) {
259         DEFINE_PROP_PTR("iommu_opaque", DMAState, iommu),
260         DEFINE_PROP_END_OF_LIST(),
261     }
262 };
263
264 static void sparc32_dma_register_devices(void)
265 {
266     sysbus_register_withprop(&sparc32_dma_info);
267 }
268
269 device_init(sparc32_dma_register_devices)