packing update
[qemu] / hw / virtio-net.h
1 /*
2  * Virtio Network Device
3  *
4  * Copyright IBM, Corp. 2007
5  *
6  * Authors:
7  *  Anthony Liguori   <aliguori@us.ibm.com>
8  *
9  * This work is licensed under the terms of the GNU GPL, version 2.  See
10  * the COPYING file in the top-level directory.
11  *
12  */
13
14 #ifndef _QEMU_VIRTIO_NET_H
15 #define _QEMU_VIRTIO_NET_H
16
17 #include "virtio.h"
18 #include "net.h"
19 #include "pci.h"
20
21 #define ETH_ALEN    6
22
23 /* from Linux's virtio_net.h */
24
25 /* The ID for virtio_net */
26 #define VIRTIO_ID_NET   1
27
28 /* The feature bitmap for virtio net */
29 #define VIRTIO_NET_F_CSUM       0       /* Host handles pkts w/ partial csum */
30 #define VIRTIO_NET_F_GUEST_CSUM 1       /* Guest handles pkts w/ partial csum */
31 #define VIRTIO_NET_F_MAC        5       /* Host has given MAC address. */
32 #define VIRTIO_NET_F_GSO        6       /* Host handles pkts w/ any GSO type */
33 #define VIRTIO_NET_F_GUEST_TSO4 7       /* Guest can handle TSOv4 in. */
34 #define VIRTIO_NET_F_GUEST_TSO6 8       /* Guest can handle TSOv6 in. */
35 #define VIRTIO_NET_F_GUEST_ECN  9       /* Guest can handle TSO[6] w/ ECN in. */
36 #define VIRTIO_NET_F_GUEST_UFO  10      /* Guest can handle UFO in. */
37 #define VIRTIO_NET_F_HOST_TSO4  11      /* Host can handle TSOv4 in. */
38 #define VIRTIO_NET_F_HOST_TSO6  12      /* Host can handle TSOv6 in. */
39 #define VIRTIO_NET_F_HOST_ECN   13      /* Host can handle TSO[6] w/ ECN in. */
40 #define VIRTIO_NET_F_HOST_UFO   14      /* Host can handle UFO in. */
41 #define VIRTIO_NET_F_MRG_RXBUF  15      /* Host can merge receive buffers. */
42 #define VIRTIO_NET_F_STATUS     16      /* virtio_net_config.status available */
43 #define VIRTIO_NET_F_CTRL_VQ    17      /* Control channel available */
44 #define VIRTIO_NET_F_CTRL_RX    18      /* Control channel RX mode support */
45 #define VIRTIO_NET_F_CTRL_VLAN  19      /* Control channel VLAN filtering */
46
47 #define VIRTIO_NET_S_LINK_UP    1       /* Link is up */
48
49 #define TX_TIMER_INTERVAL 150000 /* 150 us */
50
51 /* Maximum packet size we can receive from tap device: header + 64k */
52 #define VIRTIO_NET_MAX_BUFSIZE (sizeof(struct virtio_net_hdr) + (64 << 10))
53
54 struct virtio_net_config
55 {
56     /* The config defining mac address (6 bytes) */
57     uint8_t mac[6];
58     /* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */
59     uint16_t status;
60 } __attribute__((packed));
61
62 /* This is the first element of the scatter-gather list.  If you don't
63  * specify GSO or CSUM features, you can simply ignore the header. */
64 struct virtio_net_hdr
65 {
66 #define VIRTIO_NET_HDR_F_NEEDS_CSUM     1       // Use csum_start, csum_offset
67     uint8_t flags;
68 #define VIRTIO_NET_HDR_GSO_NONE         0       // Not a GSO frame
69 #define VIRTIO_NET_HDR_GSO_TCPV4        1       // GSO frame, IPv4 TCP (TSO)
70 #define VIRTIO_NET_HDR_GSO_UDP          3       // GSO frame, IPv4 UDP (UFO)
71 #define VIRTIO_NET_HDR_GSO_TCPV6        4       // GSO frame, IPv6 TCP
72 #define VIRTIO_NET_HDR_GSO_ECN          0x80    // TCP has ECN set
73     uint8_t gso_type;
74     uint16_t hdr_len;
75     uint16_t gso_size;
76     uint16_t csum_start;
77     uint16_t csum_offset;
78 };
79
80 /* This is the version of the header to use when the MRG_RXBUF
81  * feature has been negotiated. */
82 struct virtio_net_hdr_mrg_rxbuf
83 {
84     struct virtio_net_hdr hdr;
85     uint16_t num_buffers;   /* Number of merged rx buffers */
86 };
87
88 PCIDevice *virtio_net_init(PCIBus *bus, NICInfo *nd, int devfn);
89
90 /*
91  * Control virtqueue data structures
92  *
93  * The control virtqueue expects a header in the first sg entry
94  * and an ack/status response in the last entry.  Data for the
95  * command goes in between.
96  */
97 struct virtio_net_ctrl_hdr {
98     uint8_t class;
99     uint8_t cmd;
100 };
101
102 typedef uint8_t virtio_net_ctrl_ack;
103
104 #define VIRTIO_NET_OK     0
105 #define VIRTIO_NET_ERR    1
106
107 /*
108  * Control the RX mode, ie. promisucous and allmulti.  PROMISC and
109  * ALLMULTI commands require an "out" sg entry containing a 1 byte
110  * state value, zero = disable, non-zero = enable.  These commands
111  * are supported with the VIRTIO_NET_F_CTRL_RX feature.
112  */
113 #define VIRTIO_NET_CTRL_RX_MODE    0
114  #define VIRTIO_NET_CTRL_RX_MODE_PROMISC      0
115  #define VIRTIO_NET_CTRL_RX_MODE_ALLMULTI     1
116
117 /*
118  * Control the MAC filter table.
119  *
120  * The MAC filter table is managed by the hypervisor, the guest should
121  * assume the size is infinite.  Filtering should be considered
122  * non-perfect, ie. based on hypervisor resources, the guest may
123  * received packets from sources not specified in the filter list.
124  *
125  * In addition to the class/cmd header, the TABLE_SET command requires
126  * two out scatterlists.  Each contains a 4 byte count of entries followed
127  * by a concatenated byte stream of the ETH_ALEN MAC addresses.  The
128  * first sg list contains unicast addresses, the second is for multicast.
129  * This functionality is present if the VIRTIO_NET_F_CTRL_RX feature
130  * is available.
131  */
132 struct virtio_net_ctrl_mac {
133     uint32_t entries;
134     uint8_t macs[][ETH_ALEN];
135 };
136 #define VIRTIO_NET_CTRL_MAC    1
137  #define VIRTIO_NET_CTRL_MAC_TABLE_SET        0
138
139 /*
140  * Control VLAN filtering
141  *
142  * The VLAN filter table is controlled via a simple ADD/DEL interface.
143  * VLAN IDs not added may be filterd by the hypervisor.  Del is the
144  * opposite of add.  Both commands expect an out entry containing a 2
145  * byte VLAN ID.  VLAN filterting is available with the
146  * VIRTIO_NET_F_CTRL_VLAN feature bit.
147  */
148 #define VIRTIO_NET_CTRL_VLAN       2
149  #define VIRTIO_NET_CTRL_VLAN_ADD             0
150  #define VIRTIO_NET_CTRL_VLAN_DEL             1
151
152 #endif