initListViewStartTabAccelerationCategories();
myLogin = new LoginWindow(this);
- categorylist = new CategoryList();
+ myCategorylist = new CategoryList();
myHttpClient = new HttpClient(this);
myRegistration = new Registration(this);
connect(myRegistration,SIGNAL(sendregistration()),this,SLOT(regUserToServer()));
connect(myLogin,SIGNAL(userNameChanged()),this,SLOT(userLogin()));
+ connect(myHttpClient->myXmlreader, SIGNAL(receivedCategoryList()), this, SLOT(setCategoryCompoBox()));
+ connect(myHttpClient->myXmlreader, SIGNAL(receivedTop10List()), this, SLOT(showTop10()));
myRoute = new RouteDialog( this);
- time = 0;
- speed = 0;
+ //GPS
+ location = new Maemo5Location(this);
+ gpsData = new GPSData(location);
+ connect(location,SIGNAL(agnss()),this,SLOT(gpsStatus()));
+ gpsTime = new QDateTime();
+
+ this->time = 0;
+ this->speed = 0;
+ counterForSaveResults = 0;
timer = new QTimer();
// Accelerometer
accelerometer = new Accelerometer();
- accelerometer->setSampleRate(100);
reverseAccelerationFlag = false;
vehicleStartedMoving = false;
stopTime = 0;
accelerationStartThreshold = 0.02;
- QTimer *accelerometerTimer = new QTimer(this);
- connect(accelerometerTimer, SIGNAL(timeout()), this, SLOT(readAccelerometerData()));
- accelerometerTimer->start(kAccelerometerSampleRate);
+ accelerometerTimer = new QTimer(this);
+//tkk connect(accelerometerTimer, SIGNAL(timeout()), this, SLOT(readAccelerometerData()));
+ //accelerometerTimer->start(kAccelerometerSampleRate);
// Calculate
calculate = new Calculate();
- //connect(calculate, SIGNAL(checkPointReached()), this, SLOT(handleCheckPoint()));
+ connect(calculate, SIGNAL(checkPointReached()), this, SLOT(handleCheckPoint()));
resetAccelerometerMeasurements();
measures = new Measures();
this->initializeMeasures();
- timer->setInterval(300);
+ this->timer->setInterval(300);
connect(this->timer, SIGNAL(timeout()), this, SLOT(after_timeout()));
connect(myLogin, SIGNAL( userNameChanged()), this, SLOT(updateUserName()));
ui->labelMeasureTabResult->hide();
+ ui->pushButtonShowResultDialog->setEnabled(false);
this->setWindowTitle("Speed Freak");
}
/**
- *Destructor of this class. Should be used to release all allocated resources.
+ *Destructor of this class. Deletes all dynamic objects and sets them to NULL.
*/
CarMainWindow::~CarMainWindow()
{
delete ui;
+ ui = NULL;
//delete result;
//delete measure;
- delete categorylist;
+ delete myCategorylist;
+ myCategorylist = NULL;
delete welcomeDialog;
+ welcomeDialog = NULL;
delete myRoute;
+ myRoute = NULL;
+ delete gpsData;
+ gpsData = NULL;
+ delete gpsTime;
+ gpsTime = NULL;
}
/**
/**
*This slot function is called when ever auto start button clicked. Start-tab view.
+ *@todo Check setDiagramGapStem(100) <- (choiceInt == 2)
*/
void CarMainWindow::on_autoStartButton_clicked()
{
+ initializeMeasures();
+ resetAccelerometerMeasurements();
+ ui->pushButtonSendResult->setEnabled(false);
+ ui->pushButtonShowResultDialog->setEnabled(false);
choice = ui->listViewStartTabAccelerationCategories->currentIndex();
choiceInt = choice.row();
- qDebug() << choiceInt;
+ qDebug() << "choiceInt" << choiceInt << " " << catList.at(choiceInt);
if (choiceInt == 0)
{
ui->labelMeasureTabHeader->setText("Accelerate to 40 km/h");
result->setDiagramGapStem(75);
}
-
else if (choiceInt == 1)
{
ui->labelMeasureTabHeader->setText("Accelerate to 100 km/h");
result->setDiagramGapStem(30);
+ }
+ else if (choiceInt == 2)
+ {
+ ui->labelMeasureTabHeader->setText("Accelerate to 10 km/h");
+ result->setDiagramGapStem(100);
}
-
else
{
ui->labelMeasureTabHeader->setText("Accelerate to 80 km/h");
result->setDiagramGapStem(37.5);
}
ui->labelMeasureTabResult->setText("");
- //delete measure;
- //measure = NULL;
- //measure = new MeasureDialog();
- // connect(measure, SIGNAL(speedAchieved()), this, SLOT(openResultView()));
- accelerometer->start();
- timer->start();
- // Show measure dialog.
- //measure->show();
-
- // TODO: Move next if else to the function which is called when target speed
- // has reached.
- if (choiceInt == 0)
- {
- if (floor(this->measures->getTime40kmh()) <= 5)
- {
- result->setDiagramGapHorizontal(80);
- }
-
- else if (floor(this->measures->getTime40kmh()) <= 10)
- {
- result->setDiagramGapHorizontal(40);
- }
-
- else
- {
- result->setDiagramGapHorizontal(20);
- }
- }
-
- else
- {
- if (floor(this->measures->getTime40kmh()) <= 5)
- {
- result->setDiagramGapHorizontal(80);
- }
-
- else if (floor(this->measures->getTime40kmh()) <= 10)
- {
- result->setDiagramGapHorizontal(40);
- }
-
- else
- {
- result->setDiagramGapHorizontal(20);
- }
- }
+ this->accelerometerTimer->start(kAccelerometerSampleRate);
+ this->timer->start();
+ this->time = 0;
+ this->speed = 0;
ui->tabWidget->setCurrentWidget(this->ui->tabMeasureResult);
}
/**
*This function is used to init listViewStartTabAccelerationCategories. Start-tab view.
+ *@todo During development categories index values that are used for measuring are hardcoded
+ *@todo and accelerationCategoriesStartTab and catList are used instead of using
+ *@todo CategoryList::categoryList and CategoryList::cats.
*/
void CarMainWindow::initListViewStartTabAccelerationCategories()
{
- accelerationCategoriesStartTab << "0-40 km/h" << "0-100 km/h"; //<< "0-1/4 Mile" << "0-1/8 Mile" << "0-50 km" << "50-100 Mile" << "0-60 Mph" << "0-100 m" << "0-50 ft" << "0-50 yrd" << "0-500 in";
+ //Connect the user`s choice fron GUI to a correct variable name
+ catList.insert(0,"acceleration-0-40");
+ catList.insert(1,"acceleration-0-100");
+ catList.insert(2,"acceleration-0-10");
+
+ accelerationCategoriesStartTab << "0-40 km/h" << "0-100 km/h" << "0-10 km/h"; //<< "0-1/4 Mile" << "0-1/8 Mile" << "50-100 Mile" << "0-60 Mph" << "0-100 m" << "0-50 ft" << "0-50 yrd" << "0-500 in";
QAbstractItemModel *model = new StringListModel(accelerationCategoriesStartTab);
ui->listViewStartTabAccelerationCategories->setModel(model);
}
*/
void CarMainWindow::setCategoryCompoBox()
{
- ui->comboBoxTopCategory->addItems(categorylist->getCategoryList());
+ qDebug() << "_setCategoryCompoBox";
+ ui->comboBoxTopCategory->addItems(myHttpClient->myXmlreader->myCategoryList->getCategoryList());
+}
+
+/**
+ *This function prcesses UI updating after a new top10List has been received.
+ *@todo Check where limitNr is taken, fixed or user input, see on_comboBoxTopCategory_currentIndexChanged.
+ */
+void CarMainWindow::showTop10()
+{
+ int limitNr = 5;
+ setListViewTopList(recentCategory, limitNr);
}
/**
*This function is used to set items to labelTopList. Top-tab view.
- *@param QString category
+ *@param Category
+ *@param Size, number of results.
*/
void CarMainWindow::setListViewTopList(QString category, int size)
{
+ qDebug() << "_setListViewTopList";
QString topList;
- topList.append( categorylist->getTopList(category, size));
+ topList.append(myHttpClient->myXmlreader->myCategoryList->getTopList(category, size));
ui->labelTopList->setText(topList);
}
*/
void CarMainWindow::openResultView()
{
- //result->saveMeasuresToArray(measure->measures);
- // Show result dialog.
- //result->show();
- ui->pushButtonSendResult->setEnabled(true);
- QString timeInteger;
- if (choiceInt == 0)
- {
- if (floor(this->measures->getTime40kmh()) <= 5)
- {
- result->setDiagramGapHorizontal(80);
- }
-
- else if (floor(this->measures->getTime40kmh()) <= 10)
- {
- result->setDiagramGapHorizontal(40);
- }
-
- else
- {
- result->setDiagramGapHorizontal(20);
- }
- }
- else
- {
- if (floor(this->measures->getTime40kmh()) <= 5)
- {
- result->setDiagramGapHorizontal(80);
- }
-
- else if (floor(this->measures->getTime40kmh()) <= 10)
- {
- result->setDiagramGapHorizontal(40);
- }
-
- else
- {
- result->setDiagramGapHorizontal(20);
- }
- }
- timeInteger.setNum(this->measures->getTime40kmh());
- //time = "0 - 40 km/h: ";
- //time.append(timeInteger);
- //ui->labelResult40kmh->setText(time);
- ui->labelMeasureTabResult->show();
- ui->labelMeasureTabResult->setText(timeInteger);
- //ui->tabWidget->setCurrentWidget(this->ui->tabMeasureResult);
}
/**
void CarMainWindow::on_buttonTopRefresh_clicked()
{
myHttpClient->requestCategories();
- setCategoryCompoBox();
}
/**
*This slot function is called when ever category combobox current index changed. Top-tab view.
- *@param QString category
- *@todo Check where limitNr is taken.
+ *@param QString category.
+ *@todo Check where limitNr is taken, fixed or user input, see showTop10.
*/
void CarMainWindow::on_comboBoxTopCategory_currentIndexChanged(QString category)
{
- int limitNr = 5; //replace with real value?
+ qDebug() << "_on_comboBoxTopCategory_currentIndexChanged: " << category;
+ recentCategory = category; //for showTop10()
+ int limitNr = 5;
QString limit = QString::number(limitNr);
- category = "acceleration-0-100"; //replace with real value from category list/top window
myHttpClient->requestTopList(category, limit);
- setListViewTopList(category,10);
-}
-
-/**
- *This slot function is called when ever category combobox activated. Top-tab view.
- *@param QString category
- */
-void CarMainWindow::on_comboBoxTopCategory_activated(QString category)
-{
- setListViewTopList(category,10);
}
/**
{
QString timeString, speedString;
//time++;
- time = accelerometer->getTotalTime();
- speed = accelerometer->getCurrentSpeed();
//speed = speed +10;
+ timeString.setNum(time);
+ speedString.setNum(speed);
+ ui->labelMeasureTabTime->setText(timeString);
+ ui->labelMeasureTabSpeed->setText(speedString);
- if (floor(speed) == 10)
- {
- measures->setTime10kmh(time);
- }
-
- else if (floor(speed) == 20)
- {
- measures->setTime20kmh(time);
- }
-
- else if (floor(speed) == 30)
- {
- measures->setTime30kmh(time);
- }
-
- else if (floor(speed) == 40)
- {
- measures->setTime40kmh(time);
- }
-
- else if (floor(speed) == 50)
- {
- measures->setTime50kmh(time);
- }
-
- else if (floor(speed) == 60)
- {
- measures->setTime60kmh(time);
- }
-
- else if (floor(speed) == 70)
- {
- measures->setTime70kmh(time);
- }
-
- else if (floor(speed) == 80)
- {
- measures->setTime80kmh(time);
- }
-
- else if (floor(speed) == 90)
- {
- measures->setTime90kmh(time);
- }
-
- else if (floor(speed) == 100)
- {
- measures->setTime100kmh(time);
- }
-
- else
- {
-
- }
-
- // If speed is over 40 km/h emits speedAchieved() signal and close this dialog.
- if (speed >= 40.0)
- {
- timer->stop();
- accelerometer->stop();
- time = 0;
- speed = 0;
- //emit this->speedAchieved();
- this->openResultView();
- //this->close();
-
- }
-
- // Updates speed and time.
- else
- {
- timeString.setNum(time);
- speedString.setNum(speed);
- ui->labelMeasureTabTime->setText(timeString);
- ui->labelMeasureTabSpeed->setText(speedString);
-
- timer->start();
- }
-
+ //handleCheckPoint(time, speed);
}
/**
*/
void CarMainWindow::on_pushButtonMeasureTabAbort_clicked()
{
+ ui->pushButtonSendResult->setEnabled(false);
+ ui->pushButtonShowResultDialog->setEnabled(false);
+ ui->labelMeasureTabResult->hide();
+ ui->labelMeasureTabTime->setText("");
+ ui->labelMeasureTabSpeed->setText("");
measures->setTime10kmh(0);
measures->setTime20kmh(0);
measures->setTime30kmh(0);
measures->setTime80kmh(0);
measures->setTime90kmh(0);
measures->setTime100kmh(0);
- timer->stop();
- accelerometer->stop();
- time = 0;
- speed = 0;
+ this->accelerometerTimer->stop();
+ this->timer->stop();
+ this->time = 0;
+ this->speed = 0;
ui->tabWidget->setCurrentWidget(this->ui->StartTab);
//this->close();
}
+/**
+ *This slot function is called when pushButtonSendResult is clicked.
+ *@todo Use real category value.
+ */
void CarMainWindow::on_pushButtonSendResult_clicked()
{
- myHttpClient->sendResultXml();
+ //Pick up relevant category name and pass it to the server
+ myHttpClient->sendResultXml(catList.at(choiceInt));
ui->pushButtonSendResult->setEnabled(false);
}
if (newUserName.length())
{
ui->setUserPushButton->setText( "Change User");
- this->setWindowTitle("Speed freak - " + newUserName);
+ this->setWindowTitle("Speed Freak - " + newUserName);
}
else
{
ui->setUserPushButton->setText( "Set User");
- this->setWindowTitle("Speed freak");
+ this->setWindowTitle("Speed Freak");
}
}
*/
void CarMainWindow::on_pushButtonShowResultDialog_clicked()
{
- Measures meas;
- meas.setTime10kmh(1.3);
- meas.setTime20kmh(2.5);
- meas.setTime30kmh(3.6);
- meas.setTime40kmh(6.7);
- meas.setTime50kmh(7.3);
- meas.setTime60kmh(7.5);
- meas.setTime70kmh(8.6);
- meas.setTime80kmh(8.7);
- meas.setTime90kmh(9.6);
- meas.setTime100kmh(9.9);
- result->setDiagramGapHorizontal(40);
- result->saveMeasuresToArray(&meas);
+ result->saveMeasuresToArray(measures);
this->result->show();
}
*/
void CarMainWindow::handleCheckPoint(double totalTime, double currentSpeed)
{
- // TODO
- //totalTime;
- //currentSpeed;
- return;
+ switch (counterForSaveResults)
+ {
+ case 0:
+ measures->setTime10kmh(totalTime);
+ break;
+
+ case 1:
+ measures->setTime20kmh(totalTime);
+ break;
+
+ case 2:
+ measures->setTime30kmh(totalTime);
+ break;
+
+ case 3:
+ measures->setTime40kmh(totalTime);
+ break;
+
+ case 4:
+ measures->setTime50kmh(totalTime);
+ break;
+
+ case 5:
+ measures->setTime60kmh(totalTime);
+ break;
+
+ case 6:
+ measures->setTime70kmh(totalTime);
+ break;
+
+ case 7:
+ measures->setTime80kmh(totalTime);
+ break;
+
+ case 8:
+ measures->setTime90kmh(totalTime);
+ break;
+
+ case 9:
+ measures->setTime100kmh(totalTime);
+ break;
+
+ default:
+ break;
+ }
+ counterForSaveResults++;
+
+ if (choiceInt == 0 && measures->getTime40kmh() != 0)
+ {
+ setTimeAxisGapAndShowResult(measures->getTime40kmh());
+ this->timer->stop();
+ this->accelerometerTimer->stop();
+ this->time = 0;
+ this->speed = 0;
+ counterForSaveResults = 0;
+ }
+ else if (choiceInt == 1 && measures->getTime100kmh() != 0)
+ {
+ setTimeAxisGapAndShowResult(measures->getTime100kmh());
+ this->timer->stop();
+ this->accelerometerTimer->stop();
+ this->time = 0;
+ this->speed = 0;
+ counterForSaveResults = 0;
+ }
+ else if (choiceInt == 2 && measures->getTime10kmh() != 0)
+ {
+ setTimeAxisGapAndShowResult(measures->getTime10kmh());
+ this->timer->stop();
+ this->accelerometerTimer->stop();
+ this->time = 0;
+ this->speed = 0;
+ counterForSaveResults = 0;
+ }
+ else if (choiceInt != 1 && choiceInt != 0 && measures->getTime80kmh() != 0)
+ {
+ setTimeAxisGapAndShowResult(measures->getTime80kmh());
+ this->timer->stop();
+ this->accelerometerTimer->stop();
+ this->time = 0;
+ this->speed = 0;
+ counterForSaveResults = 0;
+ }
+ else
+ {
+ qDebug() << "something wrong in handleCheckPoint()";
+ }
}
/**
currentAcceleration = sqrt(x*x + y*y + z*z);
changeInAcceleration = (currentAcceleration - firstAcceleration); // firstAcceleration only gets set once
- if (((abs(changeInAcceleration) <= accelerationStartThreshold)
+ if (((fabs(changeInAcceleration) <= accelerationStartThreshold)
&& !vehicleStartedMoving))
{
return;
if ((changeInAcceleration <= 0))
{
// actually increasing here...
- changeInAcceleration = abs(changeInAcceleration);
+ changeInAcceleration = fabs(changeInAcceleration);
}
else
{
{
// we started to move backwards first time through
reverseAccelerationFlag = true;
- changeInAcceleration = abs(changeInAcceleration);
+ changeInAcceleration = fabs(changeInAcceleration);
}
vehicleStartedMoving = true;
s.sprintf("%.2f", changeInAcceleration);
currentAccelerationString = s;
- double speed = 0.0;
+ speed = 0.0;
speed = calculate->getCurrentSpeed();
speed = ((speed*1000)/kSecondsInHour);
s.sprintf("%.2f", speed);
// TODO
//distanceTraveled;
//horsepower;
- //totalTime;
- s.sprintf("%.2f", calculate->getTotalTime());
+ time = calculate->getTotalTime();
+
+ s.sprintf("%.2f", time);
totalTime = s;
str.append("ca: " + currentAccelerationString + " G\n" );
resetAccelerometerMeasurements();
accelerometer->calibrate();
}
+
+/**
+ *This slot function is called when GPS on checkbox state changed. Route-tab view.
+ *@param int GPSState
+ */
+void CarMainWindow::on_gpsOnCheckBox_stateChanged(int GPSState)
+{
+ if (GPSState == 0)
+ {
+ ui->labelRouteTabGPSStatus->setText("GPS off");//testing
+ location->stopPollingGPS();
+ }
+ else
+ {
+ ui->labelRouteTabGPSStatus->setText("GPS on");//testing
+ location->startPollingGPS();
+ }
+}
+
+/**
+ *This slot function is called when GPS status changed. Route-tab view.
+ */
+void CarMainWindow::gpsStatus()
+{
+ if (ui->gpsOnCheckBox->isChecked())
+ {
+ if (location->getSatellitesInUse() >= 4)
+ {
+ //Set status
+ //ui->labelRouteTabGPSStatus->setText("GPS ready");
+ ui->labelRouteTabGPSStatus->setText(QString::number(gpsData->roundCounter));
+
+ //Set time
+ gpsTime->setTime_t(location->getTime());
+ ui->labelRouteTabGPSTime->setText(gpsTime->toString());
+
+ //Set latitude & longitude
+ ui->labelRouteTabLatitude->setText("Lat: " + QString::number(location->getLatitude()));
+ ui->labelRouteTabLongitude->setText("Lon: " + QString::number(location->getLongitude()));
+ }
+
+ else
+ {
+ ui->labelRouteTabGPSStatus->setText("Waiting for GPS");
+ }
+ }
+ ui->labelRouteTabSpeed->setText(QString::number(location->getSpeed()));
+}
+
+void CarMainWindow::on_startRecPushButton_clicked()
+{
+ ui->labelRouteTabRecStatus->setText("Recording started");
+ gpsData->startRouteRecording(ui->labelRouteTabGPSTime->text());
+}
+
+void CarMainWindow::on_stopRecPushButton_clicked()
+{
+ ui->labelRouteTabRecStatus->setText("Recording stopped");
+ gpsData->stopRouteRecording(ui->labelRouteTabGPSTime->text());
+}
+
+/**
+ *Sets time axis right way in result dialog and shows target speed result.
+ *@param double pTime is the target speed result time which is shown to the user.
+ */
+void CarMainWindow::setTimeAxisGapAndShowResult(double pTime)
+{
+ ui->pushButtonShowResultDialog->setEnabled(true);
+ ui->pushButtonSendResult->setEnabled(true);
+ QString timeInteger;
+ timeInteger.setNum(pTime);
+ ui->labelMeasureTabResult->show();
+ ui->labelMeasureTabResult->setText(timeInteger);
+
+ if (floor(pTime) <= 5)
+ {
+ result->setDiagramGapHorizontal(80);
+ }
+
+ else if (floor(pTime) <= 10)
+ {
+ result->setDiagramGapHorizontal(40);
+ }
+
+ else
+ {
+ result->setDiagramGapHorizontal(20);
+ }
+}