# Makefile for QEMU.
+ifneq ($(wildcard config-host.mak),)
include config-host.mak
+include $(SRC_PATH)/rules.mak
+else
+config-host.mak:
+ @echo "Please call configure before running make!"
+ @exit 1
+endif
.PHONY: all clean cscope distclean dvi html info install install-doc \
recurse-all speed tar tarbin test
VPATH=$(SRC_PATH):$(SRC_PATH)/hw
+
CFLAGS += $(OS_CFLAGS) $(ARCH_CFLAGS)
LDFLAGS += $(OS_LDFLAGS) $(ARCH_LDFLAGS)
DOCS=
endif
-LIBS+=$(AIOLIBS)
+LIBS+=$(PTHREADLIBS)
+LIBS+=$(CLOCKLIBS)
ifdef CONFIG_SOLARIS
LIBS+=-lsocket -lnsl -lresolv
all: $(TOOLS) $(DOCS) recurse-all
+config-host.mak: configure
+ifneq ($(wildcard config-host.mak),)
+ @echo $@ is out-of-date, running configure
+ @sed -n "/.*Configured with/s/[^:]*: //p" $@ | sh
+endif
+
SUBDIR_RULES=$(patsubst %,subdir-%, $(TARGET_DIRS))
subdir-%:
- $(MAKE) -C $(subst subdir-,,$@) all
+ $(call quiet-command,$(MAKE) -C $* V="$(V)" TARGET_DIR="$*/" all,)
$(filter %-softmmu,$(SUBDIR_RULES)): libqemu_common.a
$(filter %-user,$(SUBDIR_RULES)): libqemu_user.a
OBJS=$(BLOCK_OBJS)
OBJS+=readline.o console.o
-OBJS+=irq.o
+OBJS+=irq.o ptimer.o
OBJS+=i2c.o smbus.o smbus_eeprom.o max7310.o max111x.o wm8750.o
OBJS+=ssd0303.o ssd0323.o ads7846.o stellaris_input.o twl92230.o
-OBJS+=tmp105.o lm832x.o
+OBJS+=tmp105.o lm832x.o eeprom93xx.o tsc2005.o
OBJS+=scsi-disk.o cdrom.o
OBJS+=scsi-generic.o
OBJS+=usb.o usb-hub.o usb-$(HOST_USB).o usb-hid.o usb-msd.o usb-wacom.o
OBJS+=usb-serial.o usb-net.o
OBJS+=sd.o ssi-sd.o
OBJS+=bt.o bt-host.o bt-vhci.o bt-l2cap.o bt-sdp.o bt-hci.o bt-hid.o usb-bt.o
+OBJS+=bt-hci-csr.o
OBJS+=buffered_file.o migration.o migration-tcp.o net.o qemu-sockets.o
OBJS+=qemu-char.o aio.o net-checksum.o savevm.o cache-utils.o
+OBJS+=msmouse.o ps2.o
ifdef CONFIG_BRLAPI
OBJS+= baum.o
AUDIO_OBJS+= wavcapture.o
OBJS+=$(addprefix audio/, $(AUDIO_OBJS))
+OBJS+=keymaps.o
ifdef CONFIG_SDL
OBJS+=sdl.o x_keymap.o
endif
ifdef CONFIG_CURSES
OBJS+=curses.o
endif
-OBJS+=vnc.o d3des.o
+OBJS+=vnc.o acl.o d3des.o
+ifdef CONFIG_VNC_TLS
+OBJS+=vnc-tls.o vnc-auth-vencrypt.o
+endif
+ifdef CONFIG_VNC_SASL
+OBJS+=vnc-auth-sasl.o
+endif
ifdef CONFIG_COCOA
OBJS+=cocoa.o
endif
+ifdef CONFIG_IOTHREAD
+OBJS+=qemu-thread.o
+endif
+
ifdef CONFIG_SLIRP
CPPFLAGS+=-I$(SRC_PATH)/slirp
SLIRP_OBJS=cksum.o if.o ip_icmp.o ip_input.o ip_output.o \
cocoa.o: cocoa.m
-sdl.o: sdl.c keymaps.c sdl_keysym.h
+keymaps.o: keymaps.c keymaps.h
+
+sdl.o: sdl.c keymaps.h sdl_keysym.h
sdl.o audio/sdlaudio.o: CFLAGS += $(SDL_CFLAGS)
-vnc.o: vnc.c keymaps.c sdl_keysym.h vnchextile.h d3des.c d3des.h
+acl.o: acl.h acl.c
+
+vnc.h: vnc-tls.h vnc-auth-vencrypt.h vnc-auth-sasl.h keymaps.h
+
+vnc.o: vnc.c vnc.h vnc_keysym.h vnchextile.h d3des.c d3des.h acl.h
vnc.o: CFLAGS += $(CONFIG_VNC_TLS_CFLAGS)
-curses.o: curses.c keymaps.c curses_keys.h
+vnc-tls.o: vnc-tls.c vnc.h
+
+vnc-auth-vencrypt.o: vnc-auth-vencrypt.c vnc.h
+
+vnc-auth-sasl.o: vnc-auth-sasl.c vnc.h
+
+curses.o: curses.c keymaps.h curses_keys.h
bt-host.o: CFLAGS += $(CONFIG_BLUEZ_CFLAGS)
libqemu_common.a: $(OBJS)
- rm -f $@
- $(AR) rcs $@ $(OBJS)
#######################################################################
# USER_OBJS is code used by qemu userspace emulation
USER_OBJS=cutils.o cache-utils.o
libqemu_user.a: $(USER_OBJS)
- rm -f $@
- $(AR) rcs $@ $(USER_OBJS)
######################################################################
qemu-img$(EXESUF): qemu-img.o qemu-tool.o osdep.o $(BLOCK_OBJS)
- $(CC) $(LDFLAGS) -o $@ $^ -lz $(LIBS)
-%.o: %.c
- $(CC) $(CFLAGS) $(CPPFLAGS) -c -o $@ $<
+qemu-nbd$(EXESUF): qemu-nbd.o qemu-tool.o osdep.o $(BLOCK_OBJS)
-%.o: %.m
- $(CC) $(CFLAGS) $(CPPFLAGS) -c -o $@ $<
+qemu-io$(EXESUF): qemu-io.o qemu-tool.o osdep.o cmd.o $(BLOCK_OBJS)
-qemu-nbd$(EXESUF): qemu-nbd.o qemu-tool.o osdep.o $(BLOCK_OBJS)
- $(CC) $(LDFLAGS) -o $@ $^ -lz $(LIBS)
+qemu-img$(EXESUF) qemu-nbd$(EXESUF) qemu-io$(EXESUF): LIBS += -lz
clean:
# avoid old build problems by removing potentially incorrect old files
done
distclean: clean
- rm -f config-host.mak config-host.h $(DOCS)
+ rm -f config-host.mak config-host.h $(DOCS) qemu-options.texi
rm -f qemu-{doc,tech}.{info,aux,cp,dvi,fn,info,ky,log,pg,toc,tp,vr}
for d in $(TARGET_DIRS); do \
rm -rf $$d || exit 1 ; \
endif
install-doc: $(DOCS)
- mkdir -p "$(DESTDIR)$(docdir)"
- $(INSTALL) -m 644 qemu-doc.html qemu-tech.html "$(DESTDIR)$(docdir)"
+ $(INSTALL_DIR) "$(DESTDIR)$(docdir)"
+ $(INSTALL_DATA) qemu-doc.html qemu-tech.html "$(DESTDIR)$(docdir)"
ifndef CONFIG_WIN32
- mkdir -p "$(DESTDIR)$(mandir)/man1"
- $(INSTALL) qemu.1 qemu-img.1 "$(DESTDIR)$(mandir)/man1"
- mkdir -p "$(DESTDIR)$(mandir)/man8"
- $(INSTALL) qemu-nbd.8 "$(DESTDIR)$(mandir)/man8"
+ $(INSTALL_DIR) "$(DESTDIR)$(mandir)/man1"
+ $(INSTALL_DATA) qemu.1 qemu-img.1 "$(DESTDIR)$(mandir)/man1"
+ $(INSTALL_DIR) "$(DESTDIR)$(mandir)/man8"
+ $(INSTALL_DATA) qemu-nbd.8 "$(DESTDIR)$(mandir)/man8"
endif
install: all $(if $(BUILD_DOCS),install-doc)
- mkdir -p "$(DESTDIR)$(bindir)"
+ $(INSTALL_DIR) "$(DESTDIR)$(bindir)"
ifneq ($(TOOLS),)
- $(INSTALL) -m 755 -s $(TOOLS) "$(DESTDIR)$(bindir)"
+ $(INSTALL_PROG) $(STRIP_OPT) $(TOOLS) "$(DESTDIR)$(bindir)"
endif
ifneq ($(BLOBS),)
- mkdir -p "$(DESTDIR)$(datadir)"
+ $(INSTALL_DIR) "$(DESTDIR)$(datadir)"
set -e; for x in $(BLOBS); do \
- $(INSTALL) -m 644 $(SRC_PATH)/pc-bios/$$x "$(DESTDIR)$(datadir)"; \
+ $(INSTALL_DATA) $(SRC_PATH)/pc-bios/$$x "$(DESTDIR)$(datadir)"; \
done
endif
ifndef CONFIG_WIN32
- mkdir -p "$(DESTDIR)$(datadir)/keymaps"
+ $(INSTALL_DIR) "$(DESTDIR)$(datadir)/keymaps"
set -e; for x in $(KEYMAPS); do \
- $(INSTALL) -m 644 $(SRC_PATH)/keymaps/$$x "$(DESTDIR)$(datadir)/keymaps"; \
+ $(INSTALL_DATA) $(SRC_PATH)/keymaps/$$x "$(DESTDIR)$(datadir)/keymaps"; \
done
endif
for d in $(TARGET_DIRS); do \
# documentation
%.html: %.texi
- texi2html -monolithic -number $<
+ $(call quiet-command,texi2html -I=. -monolithic -number $<," GEN $@")
%.info: %.texi
- makeinfo $< -o $@
+ $(call quiet-command,makeinfo -I . $< -o $@," GEN $@")
%.dvi: %.texi
- texi2dvi $<
+ $(call quiet-command,texi2dvi -I . $<," GEN $@")
+
+qemu-options.texi: $(SRC_PATH)/qemu-options.hx
+ $(call quiet-command,sh $(SRC_PATH)/hxtool -t < $< > $@," GEN $@")
-qemu.1: qemu-doc.texi
- $(SRC_PATH)/texi2pod.pl $< qemu.pod
- pod2man --section=1 --center=" " --release=" " qemu.pod > $@
+qemu.1: qemu-doc.texi qemu-options.texi
+ $(call quiet-command, \
+ perl -Ww -- $(SRC_PATH)/texi2pod.pl $< qemu.pod && \
+ pod2man --section=1 --center=" " --release=" " qemu.pod > $@, \
+ " GEN $@")
qemu-img.1: qemu-img.texi
- $(SRC_PATH)/texi2pod.pl $< qemu-img.pod
- pod2man --section=1 --center=" " --release=" " qemu-img.pod > $@
+ $(call quiet-command, \
+ perl -Ww -- $(SRC_PATH)/texi2pod.pl $< qemu-img.pod && \
+ pod2man --section=1 --center=" " --release=" " qemu-img.pod > $@, \
+ " GEN $@")
qemu-nbd.8: qemu-nbd.texi
- $(SRC_PATH)/texi2pod.pl $< qemu-nbd.pod
- pod2man --section=8 --center=" " --release=" " qemu-nbd.pod > $@
+ $(call quiet-command, \
+ perl -Ww -- $(SRC_PATH)/texi2pod.pl $< qemu-nbd.pod && \
+ pod2man --section=8 --center=" " --release=" " qemu-nbd.pod > $@, \
+ " GEN $@")
info: qemu-doc.info qemu-tech.info
html: qemu-doc.html qemu-tech.html
-qemu-doc.dvi qemu-doc.html qemu-doc.info: qemu-img.texi qemu-nbd.texi
+qemu-doc.dvi qemu-doc.html qemu-doc.info: qemu-img.texi qemu-nbd.texi qemu-options.texi
VERSION ?= $(shell cat VERSION)
FILE = qemu-$(VERSION)
projects / qemu / blobdiff