VPATH=$(SRC_PATH):$(SRC_PATH)/hw
-CPPFLAGS += -I. -I$(SRC_PATH) -MMD -MP -MT $@
-CPPFLAGS += -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE
-CPPFLAGS += -U_FORTIFY_SOURCE
-LIBS=
+LIBS+=-lz $(LIBS_TOOLS)
ifdef BUILD_DOCS
DOCS=qemu-doc.html qemu-tech.html qemu.1 qemu-img.1 qemu-nbd.8
DOCS=
endif
-LIBS+=$(PTHREADLIBS)
-LIBS+=$(CLOCKLIBS)
-
-ifdef CONFIG_SOLARIS
-LIBS+=-lsocket -lnsl -lresolv
-endif
-
-ifdef CONFIG_WIN32
-LIBS+=-lwinmm -lws2_32 -liphlpapi
-endif
-
-build-all: $(TOOLS) $(DOCS) roms recurse-all
+build-all: $(TOOLS) $(DOCS) recurse-all
config-host.mak: configure
ifneq ($(wildcard config-host.mak),)
$(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C $* V="$(V)" TARGET_DIR="$*/" all,)
$(filter %-softmmu,$(SUBDIR_RULES)): libqemu_common.a
-$(filter %-user,$(SUBDIR_RULES)): libqemu_user.a
-recurse-all: $(SUBDIR_RULES)
+ROMSUBDIR_RULES=$(patsubst %,romsubdir-%, $(ROMS))
+romsubdir-%:
+ $(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C pc-bios/$* V="$(V)" TARGET_DIR="$*/",)
+
+ALL_SUBDIRS=$(TARGET_DIRS) $(patsubst %,pc-bios/%, $(ROMS))
+
+recurse-all: $(SUBDIR_RULES) $(ROMSUBDIR_RULES)
#######################################################################
# block-obj-y is code used by both qemu system emulation and qemu-img
block-obj-y = cutils.o cache-utils.o qemu-malloc.o qemu-option.o module.o
-block-obj-y += nbd.o block.o aio.o aes.o
-block-obj-$(CONFIG_AIO) += posix-aio-compat.o
+block-obj-y += nbd.o block.o aio.o aes.o osdep.o
+block-obj-$(CONFIG_POSIX) += posix-aio-compat.o
+block-obj-$(CONFIG_LINUX_AIO) += linux-aio.o
-block-nested-y += cow.o qcow.o vmdk.o cloop.o dmg.o bochs.o vpc.o vvfat.o
+block-nested-y += cow.o qcow.o vdi.o vmdk.o cloop.o dmg.o bochs.o vpc.o vvfat.o
block-nested-y += qcow2.o qcow2-refcount.o qcow2-cluster.o qcow2-snapshot.o
block-nested-y += parallels.o nbd.o
block-nested-$(CONFIG_WIN32) += raw-win32.o
obj-y += ssd0303.o ssd0323.o ads7846.o stellaris_input.o twl92230.o
obj-y += tmp105.o lm832x.o eeprom93xx.o tsc2005.o
obj-y += scsi-disk.o cdrom.o
-obj-y += scsi-generic.o
+obj-y += scsi-generic.o scsi-bus.o
obj-y += usb.o usb-hub.o usb-$(HOST_USB).o usb-hid.o usb-msd.o usb-wacom.o
-obj-y += usb-serial.o usb-net.o
+obj-y += usb-serial.o usb-net.o usb-bus.o
obj-y += sd.o ssi-sd.o
obj-y += bt.o bt-host.o bt-vhci.o bt-l2cap.o bt-sdp.o bt-hci.o bt-hid.o usb-bt.o
obj-y += bt-hci-csr.o
obj-y += qemu-char.o aio.o net-checksum.o savevm.o
obj-y += msmouse.o ps2.o
obj-y += qdev.o qdev-properties.o ssi.o
+obj-y += qint.o qstring.o qdict.o
obj-$(CONFIG_BRLAPI) += baum.o
-
-ifdef CONFIG_BRLAPI
-LIBS+=-lbrlapi
-endif
-
obj-$(CONFIG_WIN32) += tap-win32.o
-obj-$(CONFIG_POSIX) += migration-exec.o
+obj-$(CONFIG_POSIX) += migration-exec.o migration-unix.o migration-fd.o
-ifdef CONFIG_COREAUDIO
-AUDIO_PT = y
-endif
-ifdef CONFIG_FMOD
-audio/audio.o audio/fmodaudio.o: CPPFLAGS := $(FMOD_CFLAGS) $(CPPFLAGS)
-endif
-ifdef CONFIG_ESD
-AUDIO_PT = y
-AUDIO_PT_INT = y
-endif
-ifdef CONFIG_PA
-AUDIO_PT = y
-AUDIO_PT_INT = y
-endif
-ifdef AUDIO_PT
-LDFLAGS += -pthread
-endif
+audio/audio.o audio/fmodaudio.o: QEMU_CFLAGS += $(FMOD_CFLAGS)
audio-obj-y = audio.o noaudio.o wavaudio.o mixeng.o
audio-obj-$(CONFIG_SDL) += sdlaudio.o
audio-obj-$(CONFIG_FMOD) += fmodaudio.o
audio-obj-$(CONFIG_ESD) += esdaudio.o
audio-obj-$(CONFIG_PA) += paaudio.o
-audio-obj-$(AUDIO_PT_INT) += audio_pt_int.o
+audio-obj-$(CONFIG_AUDIO_PT_INT) += audio_pt_int.o
audio-obj-y += wavcapture.o
obj-y += $(addprefix audio/, $(audio-obj-y))
obj-$(CONFIG_COCOA) += cocoa.o
obj-$(CONFIG_IOTHREAD) += qemu-thread.o
-ifdef CONFIG_SLIRP
-CPPFLAGS+=-I$(SRC_PATH)/slirp
-endif
-
slirp-obj-y = cksum.o if.o ip_icmp.o ip_input.o ip_output.o
slirp-obj-y += slirp.o mbuf.o misc.o sbuf.o socket.o tcp_input.o tcp_output.o
slirp-obj-y += tcp_subr.o tcp_timer.o udp.o bootp.o tftp.o
obj-$(CONFIG_SLIRP) += $(addprefix slirp/, $(slirp-obj-y))
-LIBS+=$(VDE_LIBS)
-
# xen backend driver support
obj-$(CONFIG_XEN) += xen_backend.o xen_devconfig.o
obj-$(CONFIG_XEN) += xen_console.o xenfb.o xen_disk.o xen_nic.o
-LIBS+=$(CURL_LIBS)
+QEMU_CFLAGS+=$(CURL_CFLAGS)
cocoa.o: cocoa.m
sdl.o: sdl.c keymaps.h sdl_keysym.h sdl_zoom.h
-sdl.o audio/sdlaudio.o sdl_zoom.o baum.o: CFLAGS += $(SDL_CFLAGS)
+sdl.o audio/sdlaudio.o sdl_zoom.o baum.o: QEMU_CFLAGS += $(SDL_CFLAGS)
acl.o: acl.h acl.c
vnc.o: vnc.c vnc.h vnc_keysym.h vnchextile.h d3des.c d3des.h acl.h
-vnc.o: CFLAGS += $(VNC_TLS_CFLAGS)
+vnc.o: QEMU_CFLAGS += $(VNC_TLS_CFLAGS)
vnc-tls.o: vnc-tls.c vnc.h
curses.o: curses.c keymaps.h curses_keys.h
-bt-host.o: CFLAGS += $(BLUEZ_CFLAGS)
+bt-host.o: QEMU_CFLAGS += $(BLUEZ_CFLAGS)
libqemu_common.a: $(obj-y)
-#######################################################################
-# user-obj-y is code used by qemu userspace emulation
-user-obj-y = cutils.o cache-utils.o
-
-libqemu_user.a: $(user-obj-y)
-
######################################################################
qemu-img.o: qemu-img-cmds.h
-qemu-img$(EXESUF): qemu-img.o qemu-tool.o tool-osdep.o $(block-obj-y)
-
-qemu-nbd$(EXESUF): qemu-nbd.o qemu-tool.o tool-osdep.o $(block-obj-y)
+qemu-img$(EXESUF): qemu-img.o qemu-tool.o $(block-obj-y)
-qemu-io$(EXESUF): qemu-io.o qemu-tool.o tool-osdep.o cmd.o $(block-obj-y)
+qemu-nbd$(EXESUF): qemu-nbd.o qemu-tool.o $(block-obj-y)
-qemu-img$(EXESUF) qemu-nbd$(EXESUF) qemu-io$(EXESUF): LIBS += -lz
+qemu-io$(EXESUF): qemu-io.o qemu-tool.o cmd.o $(block-obj-y)
qemu-img-cmds.h: $(SRC_PATH)/qemu-img-cmds.hx
$(call quiet-command,sh $(SRC_PATH)/hxtool -h < $< > $@," GEN $@")
+check-qint: check-qint.o qint.o qemu-malloc.o
+check-qstring: check-qstring.o qstring.o qemu-malloc.o
+check-qdict: check-qdict.o qdict.o qint.o qstring.o qemu-malloc.o
+
clean:
# avoid old build problems by removing potentially incorrect old files
rm -f config.mak config.h op-i386.h opc-i386.h gen-op-i386.h op-arm.h opc-arm.h gen-op-arm.h
rm -f slirp/*.o slirp/*.d audio/*.o audio/*.d block/*.o block/*.d
rm -f qemu-img-cmds.h
$(MAKE) -C tests clean
- for d in $(TARGET_DIRS) $(ROMS) libhw32 libhw64; do \
+ for d in $(ALL_SUBDIRS) libhw32 libhw64; do \
$(MAKE) -C $$d $@ || exit 1 ; \
done
distclean: clean
- rm -f config-host.mak config-host.h $(DOCS) qemu-options.texi qemu-img-cmds.texi
+ rm -f config-host.mak config-host.h config-host.ld $(DOCS) qemu-options.texi qemu-img-cmds.texi
rm -f qemu-{doc,tech}.{info,aux,cp,dvi,fn,info,ky,log,pg,toc,tp,vr}
for d in $(TARGET_DIRS) libhw32 libhw64; do \
rm -rf $$d || exit 1 ; \
BLOBS=
endif
-roms:
- for d in $(ROMS); do \
- $(MAKE) -C $$d || exit 1 ; \
- done
-
install-doc: $(DOCS)
$(INSTALL_DIR) "$(DESTDIR)$(docdir)"
$(INSTALL_DATA) qemu-doc.html qemu-tech.html "$(DESTDIR)$(docdir)"
-ifndef CONFIG_WIN32
+ifdef CONFIG_POSIX
$(INSTALL_DIR) "$(DESTDIR)$(mandir)/man1"
$(INSTALL_DATA) qemu.1 qemu-img.1 "$(DESTDIR)$(mandir)/man1"
$(INSTALL_DIR) "$(DESTDIR)$(mandir)/man8"
test speed: all
$(MAKE) -C tests $@
+.PHONY: TAGS
TAGS:
- etags *.[ch] tests/*.[ch] block/*.[ch] hw/*.[ch]
+ find "$(SRC_PATH)" -name '*.[hc]' -print0 | xargs -0 etags
cscope:
rm -f ./cscope.*
projects / qemu / blobdiff