<variablelist>
- <varlistentry>
- <term>
- <command><option>addr</option></command>
- <option>interface</option>
- </term>
- <listitem>
- IP address for an interface, or "No Address" if no address is assigned.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>addrs</option></command>
- <option>interface</option>
- </term>
- <listitem>
- IP addresses for an interface (if one - works like addr). Linux only.
- <para></para></listitem>
- </varlistentry>
-
-
- <varlistentry>
- <term>
- <command><option>acpiacadapter</option></command>
- </term>
- <listitem>
- ACPI ac adapter state.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>acpifan</option></command>
- </term>
- <listitem>
- ACPI fan state
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>acpitemp</option></command>
- </term>
- <listitem>
- ACPI temperature in C.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>adt746xcpu</option></command>
- </term>
- <listitem>
- CPU temperature from therm_adt746x
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>adt746xfan</option></command>
- </term>
- <listitem>
- Fan speed from therm_adt746x
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>alignr</option></command>
- <option>(num)</option>
- </term>
- <listitem>
- Right-justify text, with space of N
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>alignc</option></command>
- <option>(num)</option>
- </term>
- <listitem>
- Align text to centre
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>apm_adapter</option></command>
- </term>
- <listitem>
- Display APM AC adapter status (FreeBSD only)
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>apm_battery_life</option></command>
- </term>
- <listitem>
- Display APM battery life in percent (FreeBSD only)
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>apm_battery_time</option></command>
- </term>
- <listitem>
- Display remaining APM battery life in hh:mm:ss or "unknown" if
- AC adapterstatus is on-line or charging (FreeBSD only)
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>audacious_bar</option></command>
- <option>(height),(width)</option>
- </term>
- <listitem>
- Progress bar
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>audacious_bitrate</option></command>
- </term>
- <listitem>
- Bitrate of current tune
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>audacious_channels</option></command>
- </term>
- <listitem>
- Number of audio channels of current tune
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>audacious_filename</option></command>
- </term>
- <listitem>
- Full path and filename of current tune
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>audacious_frequency</option></command>
- </term>
- <listitem>
- Sampling frequency of current tune
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>audacious_length</option></command>
- </term>
- <listitem>
- Total length of current tune as MM:SS
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>audacious_length_seconds</option></command>
- </term>
- <listitem>
- Total length of current tune in seconds
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>audacious_playlist_position</option></command>
- </term>
- <listitem>
- Playlist position of current tune
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>audacious_playlist_length</option></command>
- </term>
- <listitem>
- Number of tunes in playlist
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>audacious_position</option></command>
- </term>
- <listitem>
- Position of current tune (MM:SS)
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>audacious_position_seconds</option></command>
- </term>
- <listitem>
- Position of current tune in seconds
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>audacious_status</option></command>
- </term>
- <listitem>
- Player status (Playing/Paused/Stopped/Not running)
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>audacious_title</option></command>
- <option>(max length)</option>
- </term>
- <listitem>
- Title of current tune with optional maximum length specifier
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>audacious_main_volume</option></command>
- </term>
- <listitem>
- The current volume fetched from Audacious
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>battery</option></command>
- <option>(num)</option>
- </term>
- <listitem>
- Battery status and remaining percentage capacity of ACPI or APM battery. ACPI battery number can be given as argument (default is BAT0).
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>battery_short</option></command>
- <option>(num)</option>
- </term>
- <listitem>
- Battery status and remaining percentage capacity of ACPI or APM battery. ACPI battery number can be given as argument (default is BAT0).
- This mode display a short status, which means that C is displayed instead of charging and D is displayed instead of discharging.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>battery_bar</option></command>
- <option>(height),(width) (num)</option>
- </term>
- <listitem>
- Battery percentage remaining of ACPI battery in a bar. ACPI battery number can be given as argument (default is BAT0).
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>battery_percent</option></command>
- <option>(num)</option>
- </term>
- <listitem>
- Battery percentage remaining for ACPI battery. ACPI battery number can be given as argument (default is BAT0).
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>battery_time</option></command>
- <option>(num)</option>
- </term>
- <listitem>
- Battery charge/discharge time remaining of ACPI battery. ACPI battery number can be given as argument (default is BAT0).
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>bmpx_artist</option></command>
- </term>
- <listitem>
- Artist in current BMPx track
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>bmpx_album</option></command>
- </term>
- <listitem>
- Album in current BMPx track
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>bmpx_title</option></command>
- </term>
- <listitem>
- Title of the current BMPx track
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>bmpx_track</option></command>
- </term>
- <listitem>
- Track number of the current BMPx track
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>bmpx_bitrate</option></command>
- </term>
- <listitem>
- Bitrate of the current BMPx track
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>bmpx_uri</option></command>
- </term>
- <listitem>
- URI of the current BMPx track
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>buffers</option></command>
- </term>
- <listitem>
- Amount of memory buffered
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>cached</option></command>
- </term>
- <listitem>
- Amount of memory cached
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>color</option></command>
- <option>(color)</option>
- </term>
- <listitem>
- Change drawing color to color
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term><command><option>colorN</option></command></term>
- <listitem>
- Change drawing color to colorN configuration option, where N is a digit between 0 and 9, inclusively.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>conky_version</option></command>
- </term>
- <listitem>
- Conky version
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>conky_build_date</option></command>
- </term>
- <listitem>
- Date Conky was built
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>conky_build_arch</option></command>
- </term>
- <listitem>
- CPU architecture Conky was built for
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>cpu</option></command>
- <option>(cpuN)</option>
- </term>
- <listitem>
- CPU usage in percents. For SMP machines, the CPU number can be provided as an argument. ${cpu cpu0} is the total usage, and ${cpu cpuX} (X >= 1) are individual CPUs.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>cpubar</option></command>
- <option>(cpuN) (height),(width)</option>
- </term>
- <listitem>
- Bar that shows CPU usage, height is bar's height in pixels. See $cpu for more info on SMP.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>cpugauge</option></command>
- <option>(cpuN) (height),(width)</option>
- </term>
- <listitem>
- Elliptical gauge that shows CPU usage, height and width are gauge's vertical and horizontal axis respectively. See $cpu for more info on SMP.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>cpugraph</option></command>
- <option>(cpuN) ("normal"|"log") (height),(width) (gradient colour 1) (gradient colour 2) (scale)</option>
- </term>
- <listitem>
- CPU usage graph, with optional colours in hex, minus the #. See $cpu for more info on SMP. Uses a logarithmic scale (to see small numbers) when you use "log" instead of "normal".
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>diskio</option></command>
- <option>(device)</option>
- </term>
- <listitem>
- Displays current disk IO. Device is optional, and takes the form of sda for /dev/sda. Individual partitions are allowed.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>diskiograph</option></command>
- <option>("normal"|"log") (height),(width) (gradient colour 1) (gradient colour 2) (scale) (device)</option>
- </term>
- <listitem>
- Disk IO graph, colours defined in hex, minus the #. If scale is non-zero, it becomes the scale for the graph. Uses a logarithmic scale (to see small numbers) when you use "log" instead of "normal".
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>diskio_read</option></command>
- <option>(device)</option>
- </term>
- <listitem>
- Displays current disk IO for reads. Device as in diskio.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>diskiograph_read</option></command>
- <option>("normal"|"log") (height),(width) (gradient colour 1) (gradient colour 2) (scale) (device)</option>
- </term>
- <listitem>
- Disk IO graph for reads, colours defined in hex, minus the #. If scale is non-zero, it becomes the scale for the graph. Device as in diskio. Uses a logarithmic scale (to see small numbers) when you use "log" instead of "normal".
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>diskio_write</option></command>
- <option>(device)</option>
- </term>
- <listitem>
- Displays current disk IO for writes. Device as in diskio.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>diskiograph_write</option></command>
- <option>("normal"|"log") (height),(width) (gradient colour 1) (gradient colour 2) (scale) (device)</option>
- </term>
- <listitem>
- Disk IO graph for writes, colours defined in hex, minus the #. If scale is non-zero, it becomes the scale for the graph. Device as in diskio. Uses a logarithmic scale (to see small numbers) when you use "log" instead of "normal".
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>disk_protect</option></command>
- <option>device</option>
- </term>
- <listitem>
- Disk protection status, if supported (needs kernel-patch). Prints either "frozen" or "free " (note the padding).
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>downspeed</option></command>
- <option>net</option>
- </term>
- <listitem>
- Download speed in KiB
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>downspeedf</option></command>
- <option>net</option>
- </term>
- <listitem>
- Download speed in KiB with one decimal
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>downspeedgraph</option></command>
- <option>("normal"|"log") (height),(width) (gradient colour 1) (gradient colour 2) (scale) (net)</option>
- </term>
- <listitem>
- Download speed graph, colours defined in hex, minus the #. If scale is non-zero, it becomes the scale for the graph. Uses a logarithmic scale (to see small numbers) when you use "log" instead of "normal".
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>else</option></command>
- </term>
- <listitem>
- Text to show if any of the above are not true
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>entropy_avail</option></command>
- </term>
- <listitem>
- Current entropy available for crypto freaks
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>entropy_bar</option></command>
- <option>(height),(width)</option>
- </term>
- <listitem>
- Normalized bar of available entropy for crypto freaks
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>entropy_poolsize</option></command>
- </term>
- <listitem>
- Total size of system entropy pool for crypto freaks
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>eval</option></command>
- <option>string</option>
- </term>
- <listitem>
- Evalutates given string according to the rules of TEXT interpretation, i.e. parsing any contained text object specifications into their output, any occuring '$$' into a single '$' and so on. The output is then being parsed again.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>exec</option></command>
- <option>command</option>
- </term>
- <listitem>
- Executes a shell command and displays the output in conky. warning: this takes a lot more resources than other variables. I'd recommend coding wanted behaviour in C and posting a patch.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>execbar</option></command>
- <option>command</option>
- </term>
- <listitem>
- Same as exec, except if the first value return is a value between 0-100, it will use that number for a bar. The size for bars can be controlled via the default_bar_size config setting.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>execgauge</option></command>
- <option>command</option>
- </term>
- <listitem>
- Same as exec, except if the first value returned is a value between 0-100, it will use that number for a gauge. The size for gauges can be controlled via the default_gauge_size config setting.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>execgraph</option></command>
- <option>("normal"|"log") (height),(width) (gradient colour 1) (gradient colour 2) (scale) command</option>
- </term>
- <listitem>
- Same as execbar, but graphs values. Uses a logaritmic scale when the log option is given (to see small numbers). Values still have to be between 0 and 100. The size for graphs can be controlled via the default_graph_size config setting.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>execi</option></command>
- <option>interval command</option>
- </term>
- <listitem>
- Same as exec but with specific interval. Interval can't be less than update_interval in configuration. See also $texeci
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>execibar</option></command>
- <option>interval command</option>
- </term>
- <listitem>
- Same as execbar, except with an interval
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>execigraph</option></command>
- <option>interval command</option>
- </term>
- <listitem>
- Same as execgraph, but takes an interval arg and graphs values.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>execigauge</option></command>
- <option>interval command</option>
- </term>
- <listitem>
- Same as execgauge, but takes an interval arg and gauges values.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>execp</option></command>
- <option>command</option>
- </term>
- <listitem>
- Executes a shell command and displays the output in conky. warning: this takes a lot more resources than other variables. I'd recommend coding wanted behaviour in C and posting a patch. This differs from $exec in that it parses the output of the command, so you can insert things like ${color red}hi!${color} in your script and have it correctly parsed by Conky.
- Caveats: Conky parses and evaluates the output of $execp every time Conky loops, and then destroys all the objects. If you try to use anything like $execi within an $execp statement, it will functionally run at the same interval that the $execp statement runs, as it is created and destroyed at every interval.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>execpi</option></command>
- <option>interval command</option>
- </term>
- <listitem>
- Same as execp but with specific interval. Interval can't be less than update_interval in configuration. Note that the output from the $execpi command is still parsed and evaluated at every interval.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>font</option></command>
- <option>(font)</option>
- </term>
- <listitem>
- Specify a different font. This new font will apply to the current line and everything following. You can use a $font with no arguments to change back to the default font (much like with $color)
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>freq</option></command>
- <option>(n)</option>
- </term>
- <listitem>
- Returns CPU #n's frequency in MHz. CPUs are counted from 1. If omitted, the parameter defaults to 1.
- <para></para></listitem>
- </varlistentry>
- <varlistentry>
- <term>
- <command><option>freq_g</option></command>
- <option>(n)</option>
- </term>
- <listitem>
- Returns CPU #n's frequency in GHz. CPUs are counted from 1. If omitted, the parameter defaults to 1.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>freq_dyn</option></command>
- <option>(n)</option>
- </term>
- <listitem>
- Returns CPU #n's frequency in MHz (defaults to 1), but is calculated by counting to clock cycles to complete an instruction. Only available for x86/amd64.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>freq_dyn_g</option></command>
- <option>(n)</option>
- </term>
- <listitem>
- Returns CPU #n's frequency in GHz (defaults to 1), but is calculated by counting to clock cycles to complete an instruction. Only available for x86/amd64.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>fs_bar</option></command>
- <option>(height),(width) fs</option>
- </term>
- <listitem>
- Bar that shows how much space is used on a file system. height is the height in pixels. fs is any file on that file system.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>fs_free</option></command>
- <option>(fs)</option>
- </term>
- <listitem>
- Free space on a file system available for users.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>fs_free_perc</option></command>
- <option>(fs)</option>
- </term>
- <listitem>
- Free percentage of space on a file system available for users.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>fs_size</option></command>
- <option>(fs)</option>
- </term>
- <listitem>
- File system size
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>fs_type</option></command>
- <option>(fs)</option>
- </term>
- <listitem>
- File system type
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>fs_used</option></command>
- <option>(fs)</option>
- </term>
- <listitem>
- File system used space
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>goto</option></command>
- <option>x</option>
- </term>
- <listitem>
- The next element will be printed at position 'x'.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>gw_iface</option></command>
- </term>
- <listitem>
- Displays the default route's interface or "multiple"/"none" accordingly.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>gw_ip</option></command>
- </term>
- <listitem>
- Displays the default gateway's IP or "multiple"/"none" accordingly.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>hddtemp</option></command>
- <option>dev, (host,(port))</option>
- </term>
- <listitem>
- Displays temperature of a selected hard disk drive as reported by the hddtemp daemon running on host:port.
- Default host is 127.0.0.1, default port is 7634.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>head</option></command>
- <option>logfile lines (interval)</option>
- </term>
- <listitem>
- Displays first N lines of supplied text text file. If interval is not supplied, Conky assumes 2x Conky's interval. Max of 30 lines can be displayed, or until the text buffer is filled.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>hr</option></command>
- <option>(height)</option>
- </term>
- <listitem>
- Horizontal line, height is the height in pixels
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>hwmon</option></command>
- <option>(dev) type n</option>
- </term>
- <listitem>
- Hwmon sensor from sysfs (Linux 2.6). Parameter dev may be omitted if you have only one hwmon device. Parameter type is either 'in' or 'vol' meaning voltage; 'fan' meaning fan; 'temp' meaning temperature. Parameter n is number of the sensor. See /sys/class/hwmon/ on your local computer.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>iconv_start</option></command>
- <option>codeset_from codeset_to</option>
- </term>
- <listitem>
- Convert text from one codeset to another using GNU iconv. Needs to be stopped with iconv_stop.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>iconv_stop</option></command>
- <option></option>
- </term>
- <listitem>
- Stop iconv codeset conversion.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>i2c</option></command>
- <option>(dev) type n</option>
- </term>
- <listitem>
- I2C sensor from sysfs (Linux 2.6). Parameter dev may be omitted if you have only one I2C device. Parameter type is either 'in' or 'vol' meaning voltage; 'fan' meaning fan; 'temp' meaning temperature. Parameter n is number of the sensor. See /sys/bus/i2c/devices/ on your local computer.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>i8k_ac_status</option></command>
- <option></option>
- </term>
- <listitem>
- If running the i8k kernel driver for Inspiron laptops, displays whether ac power is on, as listed in /proc/i8k (translated to human-readable). Beware that this is by default not enabled by i8k itself.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>i8k_bios</option></command>
- <option></option>
- </term>
- <listitem>
- If running the i8k kernel driver for Inspiron laptops, displays the bios version as listed in /proc/i8k.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>i8k_buttons_status</option></command>
- <option></option>
- </term>
- <listitem>
- If running the i8k kernel driver for Inspiron laptops, displays the volume buttons status as listed in /proc/i8k.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>i8k_cpu_temp</option></command>
- <option></option>
- </term>
- <listitem>
- If running the i8k kernel driver for Inspiron laptops, displays the cpu temperature in Celsius, as reported by /proc/i8k.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>i8k_left_fan_rpm</option></command>
- <option></option>
- </term>
- <listitem>
- If running the i8k kernel driver for Inspiron laptops, displays the left fan's rate of rotation, in revolutions per minute as listed in /proc/i8k. Beware, some laptops i8k reports these fans in reverse order.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>i8k_left_fan_status</option></command>
- <option></option>
- </term>
- <listitem>
- If running the i8k kernel driver for Inspiron laptops, displays the left fan status as listed in /proc/i8k (translated to human-readable). Beware, some laptops i8k reports these fans in reverse order.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>i8k_right_fan_rpm</option></command>
- <option></option>
- </term>
- <listitem>
- If running the i8k kernel driver for Inspiron laptops, displays the right fan's rate of rotation, in revolutions per minute as listed in /proc/i8k. Beware, some laptops i8k reports these fans in reverse order.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>i8k_right_fan_status</option></command>
- <option></option>
- </term>
- <listitem>
- If running the i8k kernel driver for Inspiron laptops, displays the right fan status as listed in /proc/i8k (translated to human-readable). Beware, some laptops i8k reports these fans in reverse order.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>i8k_serial</option></command>
- <option></option>
- </term>
- <listitem>
- If running the i8k kernel driver for Inspiron laptops, displays your laptop serial number as listed in /proc/i8k.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>i8k_version</option></command>
- <option></option>
- </term>
- <listitem>
- If running the i8k kernel driver for Inspiron laptops, displays the version formatting of /proc/i8k.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>ibm_fan</option></command>
- </term>
- <listitem>
- If running the IBM ACPI, displays the fan speed.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>ibm_temps</option></command>
- <option>N</option>
- </term>
- <listitem>
- If running the IBM ACPI, displays the temperatures
- from the IBM temperature sensors (N=0..7) Sensor 0 is
- on the CPU, 3 is on the GPU.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>ibm_volume</option></command>
- </term>
- <listitem>
- If running the IBM ACPI, displays the "master" volume,
- controlled by the volume keys (0-14).
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>ibm_brightness</option></command>
- </term>
- <listitem>
- If running the IBM ACPI, displays the brigtness of the
- laptops's LCD (0-7).
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>if_empty</option></command>
- <option>(var)</option>
- </term>
- <listitem>
- if conky variable VAR is empty, display everything
- between $if_empty and the matching $endif
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>if_existing</option></command>
- <option>file (string)</option>
- </term>
- <listitem>
- if FILE exists, display everything between if_existing
- and the matching $endif. The optional second paramater
- checks for FILE containing the specified string and
- prints everything between $if_existing and the matching
- $endif.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>if_gw</option></command>
- </term>
- <listitem>
- if there is at least one default gateway, display
- everything between $if_gw and the matching $endif
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>if_match</option></command>
- <option>expression</option>
- </term>
- <listitem>
- Evaluates the given boolean expression, printing
- everything between $if_match and the matching $endif
- depending on whether the evaluation returns true or not.
- Valid expressions consist of a left side, an operator
- and a right side. Left and right sides are being parsed
- for contained text objects before evaluation. Recognised
- left and right side types are:
- <simplelist>
- <member><command>double</command>:
- argument consists of only digits and a
- single dot.
- </member>
- <member><command>long</command>:
- argument consists of only digits.
- </member>
- <member><command>string</command>:
- argument is enclosed in quotation mark
- or the checks for double and long failed
- before.
- </member>
- </simplelist>
- Valid operands are:
- '>', '<', '>=', '<=', '==', '!='.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>if_mixer_mute</option></command>
- <option>(mixer)</option>
- </term>
- <listitem>
- If mixer exists, display everything between $if_mixer_mute and the
- matching $endif. If no mixer is specified, "Master" is used.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>if_running</option></command>
- <option>(process)</option>
- </term>
- <listitem>
- if PROCESS is running, display everything $if_running
- and the matching $endif. This uses the ``pidof'' command, so the
- -x switch is also supported.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>if_mounted</option></command>
- <option>(mountpoint)</option>
- </term>
- <listitem>
- if MOUNTPOINT is mounted, display everything between
- $if_mounted and the matching $endif
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>if_smapi_bat_installed</option></command>
- <option>(INDEX)</option>
- </term>
- <listitem>
- when using smapi, if the battery with index INDEX is
- installed, display everything between
- $if_smapi_bat_installed and the matching $endif
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>if_up</option></command>
- <option>(interface)</option>
- </term>
- <listitem>
- if INTERFACE exists and is up, display everything between $if_up and the matching $endif
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>if_updatenr</option></command>
- <option>(updatenr)</option>
- </term>
- <listitem>
- If it's the UPDATENR-th time that conky updates,
- display everything between $if_updatenr and the matching $endif.
- The counter resets when the highest UPDATENR is reached.
- Example : "{$if_updatenr 1}foo$endif{$if_updatenr 2}bar$endif{$if_updatenr 4}$endif"
- shows foo 25% of the time followed by bar 25% of the time followed by nothing the other half of the time.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>imap_messages</option></command>
- <option>(args)</option>
- </term>
- <listitem>
- Displays the number of messages in your global IMAP inbox by default. You can define individual IMAP inboxes seperately by passing arguments to this object. Arguments are: "host user pass [-i interval] [-p port] [-e command] [-r retries]". Default port is 143, default interval is 5 minutes, and default number of retries before giving up is 5. If the password is supplied as '*', you will be prompted to enter the password when Conky starts.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>imap_unseen</option></command>
- <option>(args)</option>
- </term>
- <listitem>
- Displays the number of unseen messages in your global IMAP inbox by default. You can define individual IMAP inboxes seperately by passing arguments to this object. Arguments are: "host user pass [-i interval] [-p port] [-e command] [-r retries]". Default port is 143, default interval is 5 minutes, and default number of retries before giving up is 5. If the password is supplied as '*', you will be prompted to enter the password when Conky starts.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>ioscheduler</option></command>
- <option>disk</option>
- </term>
- <listitem>
- Prints the current ioscheduler used for the given disk name (i.e. e.g. "hda" or "sdb")
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>kernel</option></command>
- </term>
- <listitem>
- Kernel version
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>laptop_mode</option></command>
- </term>
- <listitem>
- The value of /proc/sys/vm/laptop_mode
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>loadavg</option></command>
- </term>
- <listitem>
- (1,2,3)> System load average, 1 is for past 1 minute, 2 for past 5 minutes and 3 for past 15 minutes.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>loadgraph</option></command>
- <option>("normal"|"log") (height),(width) (gradient colour 1) (gradient colour 2) (scale)</option>
- </term>
- <listitem>
- Load1 average graph, similar to xload, with optional colours in hex, minus the #. Uses a logarithmic scale (to see small numbers) when you use "log" instead of "normal".
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>lines</option></command>
- <option>textfile</option>
- </term>
- <listitem>
- Displays the number of lines in the given file
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>machine</option></command>
- </term>
- <listitem>
- Machine, i686 for example
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>mails</option></command>
- <option>(mailbox)</option>
- <option>(interval)</option>
- </term>
- <listitem>
- Mail count in the specified mailbox or your mail spool if not.
- Both mbox and maildir type mailboxes are supported. You can
- use a program like fetchmail to get mails from some server
- using your favourite protocol. See also new_mails.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>new_mails</option></command>
- <option>(mailbox)</option>
- <option>(interval)</option>
- </term>
- <listitem>
- Unread mail count in the specified mailbox or mail spool if
- not. Both mbox and maildir type mailboxes are supported.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>seen_mails</option></command>
- <option>(maildir)</option>
- <option>(interval)</option>
- </term>
- <listitem>
- Number of mails marked as seen in the specified mailbox or mail spool if
- not. Only maildir type mailboxes are supported, mbox type will return -1.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>unseen_mails</option></command>
- <option>(maildir)</option>
- <option>(interval)</option>
- </term>
- <listitem>
- Number of new or unseen mails in the specified mailbox or mail spool if
- not. Only maildir type mailboxes are supported, mbox type will return -1.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>flagged_mails</option></command>
- <option>(maildir)</option>
- <option>(interval)</option>
- </term>
- <listitem>
- Number of mails marked as flagged in the specified mailbox or mail spool if
- not. Only maildir type mailboxes are supported, mbox type will return -1.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>unflagged_mails</option></command>
- <option>(maildir)</option>
- <option>(interval)</option>
- </term>
- <listitem>
- Number of mails not marked as flagged in the specified mailbox or mail spool if
- not. Only maildir type mailboxes are supported, mbox type will return -1.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>forwarded_mails</option></command>
- <option>(maildir)</option>
- <option>(interval)</option>
- </term>
- <listitem>
- Number of mails marked as forwarded in the specified mailbox or mail spool if
- not. Only maildir type mailboxes are supported, mbox type will return -1.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>unforwarded_mails</option></command>
- <option>(maildir)</option>
- <option>(interval)</option>
- </term>
- <listitem>
- Number of mails not marked as forwarded in the specified mailbox or mail spool if
- not. Only maildir type mailboxes are supported, mbox type will return -1.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>replied_mails</option></command>
- <option>(maildir)</option>
- <option>(interval)</option>
- </term>
- <listitem>
- Number of mails marked as replied in the specified mailbox or mail spool if
- not. Only maildir type mailboxes are supported, mbox type will return -1.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>unreplied_mails</option></command>
- <option>(maildir)</option>
- <option>(interval)</option>
- </term>
- <listitem>
- Number of mails not marked as replied in the specified mailbox or mail spool if
- not. Only maildir type mailboxes are supported, mbox type will return -1.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>draft_mails</option></command>
- <option>(maildir)</option>
- <option>(interval)</option>
- </term>
- <listitem>
- Number of mails marked as draft in the specified mailbox or mail spool if
- not. Only maildir type mailboxes are supported, mbox type will return -1.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>trashed_mails</option></command>
- <option>(maildir)</option>
- <option>(interval)</option>
- </term>
- <listitem>
- Number of mails marked as trashed in the specified mailbox or mail spool if
- not. Only maildir type mailboxes are supported, mbox type will return -1.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>mboxscan</option></command>
- <option>(-n number of messages to print) (-fw from width) (-sw subject width) mbox</option>
- </term>
- <listitem>
- Print a summary of recent messages in an mbox format mailbox. mbox parameter is the filename of the mailbox (can be encapsulated using '"', ie. ${mboxscan -n 10 "/home/brenden/some box"}
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>mem</option></command>
- </term>
- <listitem>
- Amount of memory in use
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>membar</option></command>
- <option>(height),(width)</option>
- </term>
- <listitem>
- Bar that shows amount of memory in use
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>memgauge</option></command>
- <option>(height),(width)</option>
- </term>
- <listitem>
- Gauge that shows amount of memory in use (see cpugauge)
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>memgraph</option></command>
- <option>("normal"|"log") (height),(width) (gradient colour 1) (gradient colour 2) (scale)</option>
- </term>
- <listitem>
- Memory usage graph. Uses a logarithmic scale (to see small numbers) when you use "log" instead of "normal".
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>memeasyfree</option></command>
- </term>
- <listitem>
- Amount of free memory including the memory that is very easily freed (buffers/cache)
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>memfree</option></command>
- </term>
- <listitem>
- Amount of free memory
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>memmax</option></command>
- </term>
- <listitem>
- Total amount of memory
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>memperc</option></command>
- </term>
- <listitem>
- Percentage of memory in use
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>mixer</option></command>
- <option>(device)</option>
- </term>
- <listitem>
- Prints the mixer value as reported by the OS. Default mixer is "vol", but you can specify one of the following optional arguments: "vol", "bass", "treble", "synth", "pcm", "speaker", "line", "mic", "cd", "mix", "pcm2", "rec", "igain", "ogain", "line1", "line2", "line3", "dig1", "dig2", "dig3", "phin", "phout", "video", "radio", "monitor". Refer to the definition of SOUND_DEVICE_NAMES in <linux/soundcard.h> (on Linux), <soundcard.h> (on OpenBSD), or <sys/soundcard.h> to find the exact options available on your system.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>mixerbar</option></command>
- <option>(device)</option>
- </term>
- <listitem>
- Displays mixer value in a bar as reported by the OS. See docs for $mixer for details on arguments.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>mixerr</option></command>
- <option>(device)</option>
- </term>
- <listitem>
- Prints the right channel mixer value as reported by the OS. See docs for $mixer for details on arguments.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>mixerrbar</option></command>
- <option>(device)</option>
- </term>
- <listitem>
- Displays the right channel mixer value in a bar as reported by the OS. See docs for $mixer for details on arguments.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>mixerl</option></command>
- <option>(device)</option>
- </term>
- <listitem>
- Prints the left channel mixer value as reported by the OS. See docs for $mixer for details on arguments.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>mixerlbar</option></command>
- <option>(device)</option>
- </term>
- <listitem>
- Displays the left channel mixer value in a bar as reported by the OS. See docs for $mixer for details on arguments.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>moc_state</option></command>
- </term>
- <listitem>
- Current state of MOC; playing, stopped etc.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>moc_file</option></command>
- </term>
- <listitem>
- File name of the current MOC song
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>moc_title</option></command>
- </term>
- <listitem>
- Title of the current MOC song
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>moc_artist</option></command>
- </term>
- <listitem>
- Artist of the current MOC song
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>moc_song</option></command>
- </term>
- <listitem>
- The current song name being played in MOC.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>moc_album</option></command>
- </term>
- <listitem>
- Album of the current MOC song
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>moc_totaltime</option></command>
- </term>
- <listitem>
- Total length of the current MOC song
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>moc_timeleft</option></command>
- </term>
- <listitem>
- Time left in the current MOC song
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>moc_curtime</option></command>
- </term>
- <listitem>
- Current time of the current MOC song
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>moc_bitrate</option></command>
- </term>
- <listitem>
- Bitrate in the current MOC song
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>moc_rate</option></command>
- </term>
- <listitem>
- Rate of the current MOC song
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>monitor</option></command>
- </term>
- <listitem>
- Number of the monitor on which conky is running
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>monitor_number</option></command>
- </term>
- <listitem>
- Number of monitors
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>mpd_artist</option></command>
- </term>
- <listitem>
- Artist in current MPD song must be enabled at compile
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>mpd_album</option></command>
- </term>
- <listitem>
- Album in current MPD song
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>mpd_bar</option></command>
- <option>(height),(width)</option>
- </term>
- <listitem>
- Bar of mpd's progress
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>mpd_bitrate</option></command>
- </term>
- <listitem>
- Bitrate of current song
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>mpd_status</option></command>
- </term>
- <listitem>
- Playing, stopped, et cetera.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>mpd_title</option></command>
- <option>(max length)</option>
- </term>
- <listitem>
- Title of current MPD song
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>mpd_vol</option></command>
- </term>
- <listitem>
- MPD's volume
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>mpd_elapsed</option></command>
- </term>
- <listitem>
- Song's elapsed time
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>mpd_length</option></command>
- </term>
- <listitem>
- Song's length
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>mpd_percent</option></command>
- </term>
- <listitem>
- Percent of song's progress
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>mpd_random</option></command>
- </term>
- <listitem>
- Random status (On/Off)
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>mpd_repeat</option></command>
- </term>
- <listitem>
- Repeat status (On/Off)
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>mpd_track</option></command>
- </term>
- <listitem>
- Prints the MPD track field
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>mpd_name</option></command>
- </term>
- <listitem>
- Prints the MPD name field
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>mpd_file</option></command>
- </term>
- <listitem>
- Prints the file name of the current MPD song
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>mpd_smart</option></command>
- <option>(max length)</option>
- </term>
- <listitem>
- Prints the song name in either the form "artist - title" or file name, depending on whats available
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>if_mpd_playing</option></command>
- </term>
- <listitem>
- if mpd is playing or paused, display everything between $if_mpd_playing and the matching $endif
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>nameserver</option></command>
- <option>(index)</option>
- </term>
- <listitem>
- Print a nameserver from /etc/resolv.conf. Index starts at and defaults to 0.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>nodename</option></command>
- </term>
- <listitem>
- Hostname
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>nvidia</option></command>
- <option>threshold</option>
- <option>temp</option>
- <option>ambient</option>
- <option>gpufreq</option>
- <option>memfreq</option>
- <option>imagequality</option>
- </term>
- <listitem>
- Nvidia graficcard support for the XNVCtrl library.
- Each option can be shortened to the least significant part.
- Temperatures are printed as float, all other values as integer.
- <simplelist>
- <member><command>threshold</command>:
- the thresholdtemperature at which the gpu slows down
- </member>
- <member><command>temp</command>:
- gives the gpu current temperature
- </member>
- <member><command>ambient</command>:
- gives current air temperature near GPU case
- </member>
- <member><command>gpufreq</command>:
- gives the current gpu frequency
- </member>
- <member><command>memfreq</command>:
- gives the current mem frequency
- </member>
- <member><command>imagequality</command>:
- which imagequality should be choosen by OpenGL applications
- </member>
- </simplelist>
- <para></para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>outlinecolor</option></command>
- <option>(color)</option>
- </term>
- <listitem>
- Change outline color
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>pb_battery</option></command>
- <option>item</option>
- </term>
- <listitem>
- If running on Apple powerbook/ibook, display
- information on battery status. The item parameter
- specifies, what information to display. Exactly one item
- must be specified. Valid items are:
- <simplelist>
- <member><command>status</command>:
- Display if battery is fully charged, charging,
- discharging or absent (running on AC)
- </member>
- <member><command>percent</command>:
- Display charge of battery in percent, if
- charging or discharging. Nothing will be
- displayed, if battery is fully charged
- or absent.
- </member>
- <member><command>time</command>:
- Display the time remaining until the battery
- will be fully charged or discharged at current
- rate. Nothing is displayed, if battery is
- absent or if it's present but fully charged
- and not discharging.
- </member>
- </simplelist>
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>platform</option></command>
- <option>(dev) type n</option>
- </term>
- <listitem>
- Platform sensor from sysfs (Linux 2.6). Parameter dev may be omitted if you have only one platform device. Platform type is either 'in' or 'vol' meaning voltage; 'fan' meaning fan; 'temp' meaning temperature. Parameter n is number of the sensor. See /sys/bus/platform/devices/ on your local computer.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>pop3_unseen</option></command>
- <option>(args)</option>
- </term>
- <listitem>
- Displays the number of unseen messages in your global POP3 inbox by default. You can define individual POP3 inboxes seperately by passing arguments to this object. Arguments are: "host user pass [-i interval] [-p port] [-e command] [-r retries]". Default port is 110, default interval is 5 minutes, and default number of retries before giving up is 5. If the password is supplied as '*', you will be prompted to enter the password when Conky starts.
-
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>pop3_used</option></command>
- <option>(args)</option>
- </term>
- <listitem>
- Displays the amount of space (in MiB, 2^20) used in your global POP3 inbox by default. You can define individual POP3 inboxes seperately by passing arguments to this object. Arguments are: "host user pass [-i interval] [-p port] [-e command] [-r retries]". Default port is 110, default interval is 5 minutes, and default number of retries before giving up is 5. If the password is supplied as '*', you will be prompted to enter the password when Conky starts.
-
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>pre_exec</option></command>
- <option>shell command</option>
- </term>
- <listitem>
- Executes a shell command one time before conky displays anything and puts output as text.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>processes</option></command>
- </term>
- <listitem>
- Total processes (sleeping and running)
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>running_processes</option></command>
- </term>
- <listitem>
- Running processes (not sleeping), requires Linux 2.6
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>scroll</option></command>
- <option>length (step) text</option>
- </term>
- <listitem>
- Scroll 'text' by 'step' characters showing 'length' number of characters at the same time. The text may also contain variables. 'step' is optional and defaults to 1 if not set. If a var creates output on multiple lines then the lines are placed behind each other separated with a '|'-sign. Do NOT use vars that change colors or otherwise affect the design inside a scrolling text. If you want spaces between the start and the end of 'text', place them at the end of 'text' not at the front ("foobar" and " foobar" can both generate "barfoo" but "foobar " will keep the spaces like this "bar foo").
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>shadecolor</option></command>
- <option>(color)</option>
- </term>
- <listitem>
- Change shading color
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>smapi</option></command>
- <option>(ARGS)</option>
- </term>
- <listitem>
- when using smapi, display contents of the /sys/devices/platform/smapi directory. ARGS are either '(FILENAME)' or 'bat (INDEX) (FILENAME)' to display the corresponding files' content. This is a very raw method of accessing the smapi values. When available, better use one of the smapi_* variables instead.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>smapi_bat_bar</option></command>
- <option>(INDEX),(height),(width)</option>
- </term>
- <listitem>
- when using smapi, display the remaining capacity of the battery with index INDEX as a bar.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>smapi_bat_perc</option></command>
- <option>(INDEX)</option>
- </term>
- <listitem>
- when using smapi, display the remaining capacity in percent of the battery with index INDEX. This is a separate variable because it supports the 'use_spacer' configuration option.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>smapi_bat_power</option></command>
- <option>INDEX</option>
- </term>
- <listitem>
- when using smapi, display the current power of the battery with index INDEX in watt. This is a separate variable because the original read out value is being converted from mW. The sign of the output reflects charging (positive) or discharging (negative) state.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>smapi_bat_temp</option></command>
- <option>INDEX</option>
- </term>
- <listitem>
- when using smapi, display the current temperature of the battery with index INDEX in degree Celsius. This is a separate variable because the original read out value is being converted from milli degree Celsius.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>stippled_hr</option></command>
- <option>(space)</option>
- </term>
- <listitem>
- Stippled (dashed) horizontal line
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>swapbar</option></command>
- <option>(height),(width)</option>
- </term>
- <listitem>
- Bar that shows amount of swap in use
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>swap</option></command>
- </term>
- <listitem>
- Amount of swap in use
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>swapmax</option></command>
- </term>
- <listitem>
- Total amount of swap
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>swapperc</option></command>
- </term>
- <listitem>
- Percentage of swap in use
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>sysname</option></command>
- </term>
- <listitem>
- System name, Linux for example
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>tcp_portmon</option></command>
- <option>port_begin port_end item (index)</option>
- <emphasis>(ip4 only at present)</emphasis>
- </term>
- <listitem>
- TCP port monitor for specified local ports. Port numbers must be in the range 1 to 65535. Valid items are:
- <simplelist>
- <member><command>count</command> - total number of connections in the range
- </member>
- <member><command>rip</command> - remote ip address
- </member>
- <member><command>rhost</command> - remote host name
- </member>
- <member><command>rport</command> - remote port number
- </member>
- <member><command>rservice</command> - remote service name from /etc/services
- </member>
- <member><command>lip</command> - local ip address
- </member>
- <member><command>lhost</command> - local host name
- </member>
- <member><command>lport</command> - local port number
- </member>
- <member><command>lservice</command> - local service name from /etc/services
- </member>
- </simplelist>The connection index provides you with access to each connection in the port monitor. The monitor will return information for index values from 0 to n-1 connections. Values higher than n-1 are simply ignored. For the "count" item, the connection index must be omitted. It is required for all other items.
- <simplelist>
- <member>Examples:</member>
- <member><command>${tcp_portmon 6881 6999 count}</command> -
- displays the number of connections in the bittorrent port range</member>
- <member><command>${tcp_portmon 22 22 rip 0}</command> -
- displays the remote host ip of the first sshd connection</member>
- <member><command>${tcp_portmon 22 22 rip 9}</command> -
- displays the remote host ip of the tenth sshd connection</member>
- <member><command>${tcp_portmon 1 1024 rhost 0}</command> -
- displays the remote host name of the first connection on a privileged port</member>
- <member><command>${tcp_portmon 1 1024 rport 4}</command> -
- displays the remote host port of the fifth connection on a privileged port</member>
- <member><command>${tcp_portmon 1 65535 lservice 14}</command> -
- displays the local service name of the fifteenth connection in the range of all ports</member>
- </simplelist>Note that port monitor variables which share the same port range actually refer to the same monitor, so many references to a single port range for different items and different indexes all use the same monitor internally. In other words, the program avoids creating redundant monitors.
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>texeci</option></command>
- <option>interval command</option>
- </term>
- <listitem>
- Runs a command at an interval inside a thread and displays the output. Same as $execi, except the command is run inside a thread. Use this if you have a slow script to keep Conky updating. You should make the interval slightly longer then the time it takes your script to execute. For example, if you have a script that take 5 seconds to execute, you should make the interval at least 6 seconds. See also $execi.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>offset</option></command>
- <option>(pixels)</option>
- </term>
- <listitem>
- Move text over by N pixels. See also $voffset.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>rss</option></command>
- <option>url delay_in_minutes action (num_par (spaces_in_front))</option>
- </term>
- <listitem>
- Download and parse RSS feeds. Action may be one of the following: feed_title, item_title (with num par), item_desc (with num par) and item_titles (when using this action and spaces_in_front is given conky places that many spaces in front of each item).
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>tab</option></command>
- <option>(width, (start))</option>
- </term>
- <listitem>
- Puts a tab of the specified width, starting from column 'start'. The unit is pixels for both arguments.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>tail</option></command>
- <option>logfile lines (interval)</option>
- </term>
- <listitem>
- Displays last N lines of supplied text text file. If interval is not supplied, Conky assumes 2x Conky's interval. Max of 30 lines can be displayed, or until the text buffer is filled.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>templateN</option></command>
- <option>(arg1)</option>
- <option>(arg2)</option>
- <option>(arg3 ...)</option>
- </term>
- <listitem>
- Evaluate the content of the templateN configuration variable (where N is a value between 0 and 9, inclusively),
- applying substitutions as described in the documentation of the corresponding configuration variable.
- The number of arguments is optional, but must match the highest referred index in the template. You can use the
- same special sequences in each argument as the ones valid for a template definition, e.g. to allow an argument
- to contain a whitespace. Also simple nesting of templates is possible this way.
- <para></para></listitem>
- <listitem>
- Here are some examples of template definitions:
- <simplelist>
- <member>template0 $\1\2</member>
- <member>template1 \1: ${fs_used \2} / ${fs_size \2}</member>
- <member>template2 \1 \2</member>
- </simplelist>
- The following list shows sample usage of the templates defined above,
- with the equivalent syntax when not using any template at all:
- <table>
- <tgroup cols="2">
- <thead>
- <row rowsep="1"><entry>using template</entry><entry>same without template</entry></row>
- </thead>
- <tbody>
- <row><entry>${template0 node name}</entry><entry>$nodename</entry></row>
- <row><entry>${template1 root /}</entry><entry>root: ${fs_free /} / ${fs_size /}</entry></row>
- <row>
- <entry><programlisting>${template1 ${template2\ disk\ root} /}</programlisting></entry>
- <entry><programlisting>disk root: ${fs_free /} / ${fs_size /}</programlisting></entry>
- </row>
- </tbody>
- </tgroup>
- </table>
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>time</option></command>
- <option>(format)</option>
- </term>
- <listitem>
- Local time, see man strftime to get more information about format
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>utime</option></command>
- <option>(format)</option>
- </term>
- <listitem>
- Display time in UTC (universal coordinate time).
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>tztime</option></command>
- <option>(timezone) (format)</option>
- </term>
- <listitem>
- Local time for specified timezone, see man strftime to get more information about format. The timezone argument is specified in similar fashion as TZ environment variable. For hints, look in /usr/share/zoneinfo. e.g. US/Pacific, Europe/Zurich, etc.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>totaldown</option></command>
- <option>net</option>
- </term>
- <listitem>
- Total download, overflows at 4 GB on Linux with 32-bit arch and there doesn't seem to be a way to know how many times it has already done that before conky has started.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>top</option></command>
- <option>type, num</option>
- </term>
- <listitem>
- This takes arguments in the form:top (name) (number) Basically, processes are ranked from highest to lowest in terms of cpu usage, which is what (num) represents. The types are: "name", "pid", "cpu", "mem", "mem_res", "mem_vsize", and "time". There can be a max of 10 processes listed.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>top_mem</option></command>
- <option>type, num</option>
- </term>
- <listitem>
- Same as top, except sorted by mem usage instead of cpu
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>top_time</option></command>
- <option>type, num</option>
- </term>
- <listitem>
- Same as top, except sorted by total CPU time instead of current CPU usage
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>totalup</option></command>
- <option>net</option>
- </term>
- <listitem>
- Total upload, this one too, may overflow
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>updates</option></command>
- <option>Number of updates</option>
- </term>
- <listitem>
- for debugging
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>upspeed</option></command>
- <option>net</option>
- </term>
- <listitem>
- Upload speed in KiB
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>upspeedf</option></command>
- <option>net</option>
- </term>
- <listitem>
- Upload speed in KiB with one decimal
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>upspeedgraph</option></command>
- <option>("normal"|"log") (height),(width) (gradient colour 1) (gradient colour 2) (scale) (net)</option>
- </term>
- <listitem>
- Upload speed graph, colours defined in hex, minus the #. If scale is non-zero, it becomes the scale for the graph. Uses a logarithmic scale (to see small numbers) when you use "log" instead of "normal".
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>uptime</option></command>
- </term>
- <listitem>
- Uptime
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>uptime_short</option></command>
- </term>
- <listitem>
- Uptime in a shorter format
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>user_number</option></command>
- </term>
- <listitem>
- Number of users logged in
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>user_names</option></command>
- </term>
- <listitem>
- Lists the names of the users logged in
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>user_terms</option></command>
- </term>
- <listitem>
- Lists the consoles in use
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>user_times</option></command>
- </term>
- <listitem>
- Lists how long users have been logged in for
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>voffset</option></command>
- <option>(pixels)</option>
- </term>
- <listitem>
- Change vertical offset by N pixels. Negative values will cause text to overlap. See also $offset.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>voltage_mv</option></command>
- <option>(n)</option>
- </term>
- <listitem>
- Returns CPU #n's voltage in mV. CPUs are
- counted from 1. If omitted, the parameter
- defaults to 1.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>voltage_v</option></command>
- <option>(n)</option>
- </term>
- <listitem>
- Returns CPU #n's voltage in V. CPUs are
- counted from 1. If omitted, the parameter
- defaults to 1.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>wireless_essid</option></command>
- <option>net</option>
- </term>
- <listitem>
- Wireless access point ESSID (Linux only)
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>wireless_mode</option></command>
- <option>net</option>
- </term>
- <listitem>
- Wireless mode (Managed/Ad-Hoc/Master) (Linux only)
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>wireless_bitrate</option></command>
- <option>net</option>
- </term>
- <listitem>
- Wireless bitrate (ie 11 Mb/s) (Linux only)
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>wireless_ap</option></command>
- <option>net</option>
- </term>
- <listitem>
- Wireless access point MAC address (Linux only)
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>wireless_link_qual</option></command>
- <option>net</option>
- </term>
- <listitem>
- Wireless link quality (Linux only)
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>wireless_link_qual_max</option></command>
- <option>net</option>
- </term>
- <listitem>
- Wireless link quality maximum value (Linux only)
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>wireless_link_qual_perc</option></command>
- <option>net</option>
- </term>
- <listitem>
- Wireless link quality in percents (Linux only)
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>wireless_link_bar</option></command>
- <option>(height), (width) net</option>
- </term>
- <listitem>
- Wireless link quality bar (Linux only)
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>words</option></command>
- <option>textfile</option>
- </term>
- <listitem>
- Displays the number of words in the given file
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>xmms2_artist</option></command>
- </term>
- <listitem>
- Artist in current XMMS2 song
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>xmms2_album</option></command>
- </term>
- <listitem>
- Album in current XMMS2 song
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>xmms2_title</option></command>
- </term>
- <listitem>
- Title in current XMMS2 song
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>xmms2_genre</option></command>
- </term>
- <listitem>
- Genre in current XMMS2 song
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>xmms2_comment</option></command>
- </term>
- <listitem>
- Comment in current XMMS2 song
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>xmms2_decoder</option></command>
- </term>
- <listitem>
- Decoder plugin used
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>xmms2_transport</option></command>
- </term>
- <listitem>
- Transport plugin used
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>xmms2_url</option></command>
- </term>
- <listitem>
- Full path to current song
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>xmms2_tracknr</option></command>
- </term>
- <listitem>
- Track number in current XMMS2 song
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>xmms2_bitrate</option></command>
- </term>
- <listitem>
- Bitrate of current song
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>xmms2_id</option></command>
- </term>
- <listitem>
- XMMS2 id of current song
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>xmms2_duration</option></command>
- </term>
- <listitem>
- Duration of current song
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>xmms2_elapsed</option></command>
- </term>
- <listitem>
- Song's elapsed time
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>xmms2_size</option></command>
- </term>
- <listitem>
- Size of current song
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>xmms2_percent</option></command>
- </term>
- <listitem>
- Percent of song's progress
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>xmms2_status</option></command>
- </term>
- <listitem>
- XMMS2 status (Playing, Paused, Stopped, or Disconnected)
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>xmms2_bar</option></command>
- <option>(height),(width)</option>
- </term>
- <listitem>
- Bar of XMMS2's progress
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>xmms2_smart</option></command>
- </term>
- <listitem>
- Prints the song name in either the form "artist - title" or file name, depending on whats available
- <para></para></listitem>
- </varlistentry>
- <varlistentry>
- <term>
- <command><option>if_xmms2_connected</option></command>
- </term>
- <listitem>
- Display everything between $if_xmms2_connected and the matching $endif if xmms2 is running.
- <para></para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
- <command><option>eve</option></command>
- <option>api_userid api_key character_id</option>
- </term>
- <listitem>
- Fetches your currently training skill from the Eve Online API servers (http://www.eve-online.com/) and displays the skill along with the remaining training time.
- <para></para></listitem>
- </varlistentry>
-
+ <varlistentry>
+ <term>
+ <command>
+ <option>acpiacadapter</option>
+ </command>
+ </term>
+ <listitem>ACPI ac adapter state.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>acpifan</option>
+ </command>
+ </term>
+ <listitem>ACPI fan state
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>acpitemp</option>
+ </command>
+ </term>
+ <listitem>ACPI temperature in C.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>addr</option>
+ </command>
+ <option>(interface)</option>
+ </term>
+ <listitem>IP address for an interface, or "No Address" if
+ no address is assigned.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>addrs</option>
+ </command>
+ <option>(interface)</option>
+ </term>
+ <listitem>IP addresses for an interface (if one - works
+ like addr). Linux only.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>adt746xcpu</option>
+ </command>
+ </term>
+ <listitem>CPU temperature from therm_adt746x
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>adt746xfan</option>
+ </command>
+ </term>
+ <listitem>Fan speed from therm_adt746x
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>alignc</option>
+ </command>
+ <option>(num)</option>
+ </term>
+ <listitem>Align text to centre
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>alignr</option>
+ </command>
+ <option>(num)</option>
+ </term>
+ <listitem>Right-justify text, with space of N
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>apcupsd</option>
+ </command>
+ <option>host</option>
+ <option>port</option>
+ </term>
+ <listitem>Sets up the connection to apcupsd daemon. Prints
+ nothing, defaults to localhost:3551
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>apcupsd_cable</option>
+ </command>
+ </term>
+ <listitem>Prints the UPS connection type.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>apcupsd_charge</option>
+ </command>
+ </term>
+ <listitem>Current battery capacity in percent.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>apcupsd_lastxfer</option>
+ </command>
+ </term>
+ <listitem>Reason for last transfer from line to battery.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>apcupsd_linev</option>
+ </command>
+ </term>
+ <listitem>Nominal input voltage.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>apcupsd_load</option>
+ </command>
+ </term>
+ <listitem>Current load in percent.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>apcupsd_loadbar</option>
+ </command>
+ </term>
+ <listitem>Bar showing current load.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>apcupsd_loadgauge</option>
+ </command>
+ <option>(height),(width)</option>
+ </term>
+ <listitem>Gauge that shows current load.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>apcupsd_loadgraph</option>
+ </command>
+ <option>(height),(width) (gradient colour 1) (gradient
+ colour 2) (scale) (-t) (-l)</option>
+ </term>
+ <listitem>History graph of current load.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>apcupsd_model</option>
+ </command>
+ </term>
+ <listitem>Prints the model of the UPS.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>apcupsd_name</option>
+ </command>
+ </term>
+ <listitem>Prints the UPS user-defined name.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>apcupsd_status</option>
+ </command>
+ </term>
+ <listitem>Prints current status (on-line, on-battery).
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>apcupsd_temp</option>
+ </command>
+ </term>
+ <listitem>Current internal temperature.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>apcupsd_timeleft</option>
+ </command>
+ </term>
+ <listitem>Time left to run on battery.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>apcupsd_upsmode</option>
+ </command>
+ </term>
+ <listitem>Prints the UPS mode (e.g. standalone).
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>apm_adapter</option>
+ </command>
+ </term>
+ <listitem>Display APM AC adapter status (FreeBSD only)
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>apm_battery_life</option>
+ </command>
+ </term>
+ <listitem>Display APM battery life in percent (FreeBSD
+ only)
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>apm_battery_time</option>
+ </command>
+ </term>
+ <listitem>Display remaining APM battery life in hh:mm:ss or
+ "unknown" if AC adapterstatus is on-line or charging
+ (FreeBSD only)
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>audacious_bar</option>
+ </command>
+ <option>(height),(width)</option>
+ </term>
+ <listitem>Progress bar
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>audacious_bitrate</option>
+ </command>
+ </term>
+ <listitem>Bitrate of current tune
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>audacious_channels</option>
+ </command>
+ </term>
+ <listitem>Number of audio channels of current tune
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>audacious_filename</option>
+ </command>
+ </term>
+ <listitem>Full path and filename of current tune
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>audacious_frequency</option>
+ </command>
+ </term>
+ <listitem>Sampling frequency of current tune
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>audacious_length</option>
+ </command>
+ </term>
+ <listitem>Total length of current tune as MM:SS
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>audacious_length_seconds</option>
+ </command>
+ </term>
+ <listitem>Total length of current tune in seconds
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>audacious_main_volume</option>
+ </command>
+ </term>
+ <listitem>The current volume fetched from Audacious
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>audacious_playlist_length</option>
+ </command>
+ </term>
+ <listitem>Number of tunes in playlist
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>audacious_playlist_position</option>
+ </command>
+ </term>
+ <listitem>Playlist position of current tune
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>audacious_position</option>
+ </command>
+ </term>
+ <listitem>Position of current tune (MM:SS)
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>audacious_position_seconds</option>
+ </command>
+ </term>
+ <listitem>Position of current tune in seconds
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>audacious_status</option>
+ </command>
+ </term>
+ <listitem>Player status (Playing/Paused/Stopped/Not
+ running)
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>audacious_title</option>
+ </command>
+ <option>(max length)</option>
+ </term>
+ <listitem>Title of current tune with optional maximum
+ length specifier
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>battery</option>
+ </command>
+ <option>(num)</option>
+ </term>
+ <listitem>Battery status and remaining percentage capacity
+ of ACPI or APM battery. ACPI battery number can be given as
+ argument (default is BAT0).
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>battery_bar</option>
+ </command>
+ <option>(height),(width) (num)</option>
+ </term>
+ <listitem>Battery percentage remaining of ACPI battery in a
+ bar. ACPI battery number can be given as argument (default
+ is BAT0).
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>battery_percent</option>
+ </command>
+ <option>(num)</option>
+ </term>
+ <listitem>Battery percentage remaining for ACPI battery.
+ ACPI battery number can be given as argument (default is
+ BAT0).
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>battery_short</option>
+ </command>
+ <option>(num)</option>
+ </term>
+ <listitem>Battery status and remaining percentage capacity
+ of ACPI or APM battery. ACPI battery number can be given as
+ argument (default is BAT0). This mode display a short
+ status, which means that C is displayed instead of
+ charging, D for discharging, F for full, N for not present,
+ E for empty and U for unknown.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>battery_time</option>
+ </command>
+ <option>(num)</option>
+ </term>
+ <listitem>Battery charge/discharge time remaining of ACPI
+ battery. ACPI battery number can be given as argument
+ (default is BAT0).
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>blink</option>
+ </command>
+ <option>text_and_other_conky_vars</option>
+ </term>
+ <listitem>Let 'text_and_other_conky_vars' blink on and off.
+
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>bmpx_album</option>
+ </command>
+ </term>
+ <listitem>Album in current BMPx track
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>bmpx_artist</option>
+ </command>
+ </term>
+ <listitem>Artist in current BMPx track
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>bmpx_bitrate</option>
+ </command>
+ </term>
+ <listitem>Bitrate of the current BMPx track
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>bmpx_title</option>
+ </command>
+ </term>
+ <listitem>Title of the current BMPx track
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>bmpx_track</option>
+ </command>
+ </term>
+ <listitem>Track number of the current BMPx track
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>bmpx_uri</option>
+ </command>
+ </term>
+ <listitem>URI of the current BMPx track
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>buffers</option>
+ </command>
+ </term>
+ <listitem>Amount of memory buffered
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>cached</option>
+ </command>
+ </term>
+ <listitem>Amount of memory cached
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>color</option>
+ </command>
+ <option>(color)</option>
+ </term>
+ <listitem>Change drawing color to 'color' which is a name of
+ a color or a hexcode preceded with # (for example #0A1B2C ).
+ If you use ncurses only the following colors are supported:
+ red,green,yellow,blue,magenta,cyan,black,white.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>colorN</option>
+ </command>
+ </term>
+ <listitem>Change drawing color to colorN configuration
+ option, where N is a digit between 0 and 9, inclusively.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>combine</option>
+ </command>
+ <option>var1 var2</option>
+ </term>
+ <listitem>Places the lines of var2 to the right of the
+ lines of var1 seperated by the chars that are put between
+ var1 and var2. For example: ${combine ${head /proc/cpuinfo
+ 2} - ${head /proc/meminfo 1}} gives as output
+ "cpuinfo_line1 - meminfo_line1" on line 1 and
+ "cpuinfo_line2 -" on line 2. $combine vars can also be
+ nested to place more vars next to each other.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>conky_build_arch</option>
+ </command>
+ </term>
+ <listitem>CPU architecture Conky was built for
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>conky_build_date</option>
+ </command>
+ </term>
+ <listitem>Date Conky was built
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>conky_version</option>
+ </command>
+ </term>
+ <listitem>Conky version
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>cpu</option>
+ </command>
+ <option>(cpuN)</option>
+ </term>
+ <listitem>CPU usage in percents. For SMP machines, the CPU
+ number can be provided as an argument. ${cpu cpu0} is the
+ total usage, and ${cpu cpuX} (X >= 1) are individual
+ CPUs.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>cpubar</option>
+ </command>
+ <option>(cpuN) (height),(width)</option>
+ </term>
+ <listitem>Bar that shows CPU usage, height is bar's height
+ in pixels. See $cpu for more info on SMP.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>cpugauge</option>
+ </command>
+ <option>(cpuN) (height),(width)</option>
+ </term>
+ <listitem>Elliptical gauge that shows CPU usage, height and
+ width are gauge's vertical and horizontal axis
+ respectively. See $cpu for more info on SMP.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>cpugraph</option>
+ </command>
+ <option>(cpuN) (height),(width) (gradient colour 1)
+ (gradient colour 2) (scale) (-t) (-l)</option>
+ </term>
+ <listitem>CPU usage graph, with optional colours in hex,
+ minus the #. See $cpu for more info on SMP. Uses a
+ logarithmic scale (to see small numbers) when you use the
+ -l switch. Takes the switch '-t' to use a temperature
+ gradient, which makes the gradient values change depending
+ on the amplitude of a particular graph value (try it and
+ see).
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>curl</option>
+ </command>
+ <option>url interval_in_minutes</option>
+ </term>
+ <listitem>
+ <para>Download data from URI using Curl at the
+ specified interval. The interval may be a floating
+ point value greater than 0, otherwise defaults to 15
+ minutes. Most useful when used in conjunction with Lua
+ and the Lua API. This object is threaded, and once a
+ thread is created it can't be explicitely destroyed.
+ One thread will run for each URI specified. You can use
+ any protocol that Curl supports.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>desktop</option>
+ </command>
+ </term>
+ <listitem>Number of the desktop on which conky is running
+ or the message "Not running in X" if this is the case.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>desktop_name</option>
+ </command>
+ </term>
+ <listitem>Name of the desktop on which conky is running or
+ the message "Not running in X" if this is the case.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>desktop_number</option>
+ </command>
+ </term>
+ <listitem>Number of desktops or the message "Not running in
+ X" if this is the case.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>disk_protect</option>
+ </command>
+ <option>device</option>
+ </term>
+ <listitem>Disk protection status, if supported (needs
+ kernel-patch). Prints either "frozen" or "free " (note the
+ padding).
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>diskio</option>
+ </command>
+ <option>(device)</option>
+ </term>
+ <listitem>Displays current disk IO. Device is optional, and
+ takes the form of sda for /dev/sda. Individual partitions
+ are allowed.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>diskio_read</option>
+ </command>
+ <option>(device)</option>
+ </term>
+ <listitem>Displays current disk IO for reads. Device as in
+ diskio.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>diskio_write</option>
+ </command>
+ <option>(device)</option>
+ </term>
+ <listitem>Displays current disk IO for writes. Device as in
+ diskio.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>diskiograph</option>
+ </command>
+ <option>(device) (height),(width) (gradient colour 1)
+ (gradient colour 2) (scale) (-t) (-l)</option>
+ </term>
+ <listitem>Disk IO graph, colours defined in hex, minus the
+ #. If scale is non-zero, it becomes the scale for the
+ graph. Uses a logarithmic scale (to see small numbers) when
+ you use -l switch. Takes the switch '-t' to use a
+ temperature gradient, which makes the gradient values
+ change depending on the amplitude of a particular graph
+ value (try it and see).
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>diskiograph_read</option>
+ </command>
+ <option>(device) (height),(width) (gradient colour 1)
+ (gradient colour 2) (scale) (-t) (-l)</option>
+ </term>
+ <listitem>Disk IO graph for reads, colours defined in hex,
+ minus the #. If scale is non-zero, it becomes the scale for
+ the graph. Device as in diskio. Uses a logarithmic scale
+ (to see small numbers) when you use -l switch. Takes the
+ switch '-t' to use a temperature gradient, which makes the
+ gradient values change depending on the amplitude of a
+ particular graph value (try it and see).
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>diskiograph_write</option>
+ </command>
+ <option>(device) (height),(width) (gradient colour 1)
+ (gradient colour 2) (scale) (-t) (-l)</option>
+ </term>
+ <listitem>Disk IO graph for writes, colours defined in hex,
+ minus the #. If scale is non-zero, it becomes the scale for
+ the graph. Device as in diskio. Uses a logarithmic scale
+ (to see small numbers) when you use -l switch. Takes the
+ switch '-t' to use a temperature gradient, which makes the
+ gradient values change depending on the amplitude of a
+ particular graph value (try it and see).
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>downspeed</option>
+ </command>
+ <option>(net)</option>
+ </term>
+ <listitem>Download speed in suitable IEC units
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>downspeedf</option>
+ </command>
+ <option>(net)</option>
+ </term>
+ <listitem>Download speed in KiB with one decimal
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>downspeedgraph</option>
+ </command>
+ <option>(netdev) (height),(width) (gradient colour 1)
+ (gradient colour 2) (scale) (-t) (-l)</option>
+ </term>
+ <listitem>Download speed graph, colours defined in hex,
+ minus the #. If scale is non-zero, it becomes the scale for
+ the graph. Uses a logarithmic scale (to see small numbers)
+ when you use -l switch. Takes the switch '-t' to use a
+ temperature gradient, which makes the gradient values
+ change depending on the amplitude of a particular graph
+ value (try it and see).
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>draft_mails</option>
+ </command>
+ <option>(maildir)</option>
+ <option>(interval)</option>
+ </term>
+ <listitem>Number of mails marked as draft in the specified
+ mailbox or mail spool if not. Only maildir type mailboxes
+ are supported, mbox type will return -1.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>else</option>
+ </command>
+ </term>
+ <listitem>Text to show if any of the above are not true
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>endif</option>
+ </command>
+ <option />
+ </term>
+ <listitem>Ends an $if block.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>entropy_avail</option>
+ </command>
+ </term>
+ <listitem>Current entropy available for crypto freaks
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>entropy_bar</option>
+ </command>
+ <option>(height),(width)</option>
+ </term>
+ <listitem>Normalized bar of available entropy for crypto
+ freaks
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>entropy_perc</option>
+ </command>
+ </term>
+ <listitem>Percentage of entropy available in comparison to
+ the poolsize
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>entropy_poolsize</option>
+ </command>
+ </term>
+ <listitem>Total size of system entropy pool for crypto
+ freaks
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>eval</option>
+ </command>
+ <option>string</option>
+ </term>
+ <listitem>Evalutates given string according to the rules of
+ TEXT interpretation, i.e. parsing any contained text object
+ specifications into their output, any occuring '$$' into a
+ single '$' and so on. The output is then being parsed
+ again.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>eve</option>
+ </command>
+ <option>api_userid api_key character_id</option>
+ </term>
+ <listitem>Fetches your currently training skill from the
+ Eve Online API servers (http://www.eve-online.com/) and
+ displays the skill along with the remaining training time.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>exec</option>
+ </command>
+ <option>command</option>
+ </term>
+ <listitem>Executes a shell command and displays the output
+ in conky. warning: this takes a lot more resources than
+ other variables. I'd recommend coding wanted behaviour in C
+ and posting a patch.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>execbar</option>
+ </command>
+ <option>command</option>
+ </term>
+ <listitem>Same as exec, except if the first value return is
+ a value between 0-100, it will use that number for a bar.
+ The size for bars can be controlled via the
+ default_bar_size config setting.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>execgauge</option>
+ </command>
+ <option>command</option>
+ </term>
+ <listitem>Same as exec, except if the first value returned
+ is a value between 0-100, it will use that number for a
+ gauge. The size for gauges can be controlled via the
+ default_gauge_size config setting.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>execgraph</option>
+ </command>
+ <option>(-t) (-l) command</option>
+ </term>
+ <listitem>Same as execbar, but graphs values. Uses a
+ logaritmic scale when the log option (-l switch) is given
+ (to see small numbers). Values still have to be between 0
+ and 100. The size for graphs can be controlled via the
+ default_graph_size config setting. Takes the switch '-t' to
+ use a temperature gradient, which makes the gradient values
+ change depending on the amplitude of a particular graph
+ value (try it and see). If -t or -l is your first argument,
+ you may need to preceed it by a space (' ').
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>execi</option>
+ </command>
+ <option>interval command</option>
+ </term>
+ <listitem>Same as exec but with specific interval. Interval
+ can't be less than update_interval in configuration. See
+ also $texeci
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>execibar</option>
+ </command>
+ <option>interval command</option>
+ </term>
+ <listitem>Same as execbar, except with an interval
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>execigauge</option>
+ </command>
+ <option>interval command</option>
+ </term>
+ <listitem>Same as execgauge, but takes an interval arg and
+ gauges values.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>execigraph</option>
+ </command>
+ <option>interval (-t) (-l) command</option>
+ </term>
+ <listitem>Same as execgraph, but takes an interval arg and
+ graphs values. If -t or -l is your first argument, you may
+ need to preceed it by a space (' ').
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>execp</option>
+ </command>
+ <option>command</option>
+ </term>
+ <listitem>Executes a shell command and displays the output
+ in conky. warning: this takes a lot more resources than
+ other variables. I'd recommend coding wanted behaviour in C
+ and posting a patch. This differs from $exec in that it
+ parses the output of the command, so you can insert things
+ like ${color red}hi!${color} in your script and have it
+ correctly parsed by Conky. Caveats: Conky parses and
+ evaluates the output of $execp every time Conky loops, and
+ then destroys all the objects. If you try to use anything
+ like $execi within an $execp statement, it will
+ functionally run at the same interval that the $execp
+ statement runs, as it is created and destroyed at every
+ interval.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>execpi</option>
+ </command>
+ <option>interval command</option>
+ </term>
+ <listitem>Same as execp but with specific interval.
+ Interval can't be less than update_interval in
+ configuration. Note that the output from the $execpi
+ command is still parsed and evaluated at every interval.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>flagged_mails</option>
+ </command>
+ <option>(maildir)</option>
+ <option>(interval)</option>
+ </term>
+ <listitem>Number of mails marked as flagged in the
+ specified mailbox or mail spool if not. Only maildir type
+ mailboxes are supported, mbox type will return -1.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>font</option>
+ </command>
+ <option>(font)</option>
+ </term>
+ <listitem>Specify a different font. This new font will
+ apply to the current line and everything following. You can
+ use a $font with no arguments to change back to the default
+ font (much like with $color)
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>forwarded_mails</option>
+ </command>
+ <option>(maildir)</option>
+ <option>(interval)</option>
+ </term>
+ <listitem>Number of mails marked as forwarded in the
+ specified mailbox or mail spool if not. Only maildir type
+ mailboxes are supported, mbox type will return -1.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>freq</option>
+ </command>
+ <option>(n)</option>
+ </term>
+ <listitem>Returns CPU #n's frequency in MHz. CPUs are
+ counted from 1. If omitted, the parameter defaults to 1.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>freq_g</option>
+ </command>
+ <option>(n)</option>
+ </term>
+ <listitem>Returns CPU #n's frequency in GHz. CPUs are
+ counted from 1. If omitted, the parameter defaults to 1.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>fs_bar</option>
+ </command>
+ <option>(height),(width) fs</option>
+ </term>
+ <listitem>Bar that shows how much space is used on a file
+ system. height is the height in pixels. fs is any file on
+ that file system.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>fs_bar_free</option>
+ </command>
+ <option>(height),(width) fs</option>
+ </term>
+ <listitem>Bar that shows how much space is free on a file
+ system. height is the height in pixels. fs is any file on
+ that file system.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>fs_free</option>
+ </command>
+ <option>(fs)</option>
+ </term>
+ <listitem>Free space on a file system available for users.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>fs_free_perc</option>
+ </command>
+ <option>(fs)</option>
+ </term>
+ <listitem>Free percentage of space on a file system
+ available for users.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>fs_size</option>
+ </command>
+ <option>(fs)</option>
+ </term>
+ <listitem>File system size.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>fs_type</option>
+ </command>
+ <option>(fs)</option>
+ </term>
+ <listitem>File system type.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>fs_used</option>
+ </command>
+ <option>(fs)</option>
+ </term>
+ <listitem>File system used space.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>fs_used_perc</option>
+ </command>
+ <option>(fs)</option>
+ </term>
+ <listitem>Percent of file system used space.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>goto</option>
+ </command>
+ <option>x</option>
+ </term>
+ <listitem>The next element will be printed at position 'x'.
+
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>gw_iface</option>
+ </command>
+ </term>
+ <listitem>Displays the default route's interface or
+ "multiple"/"none" accordingly.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>gw_ip</option>
+ </command>
+ </term>
+ <listitem>Displays the default gateway's IP or
+ "multiple"/"none" accordingly.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>hddtemp</option>
+ </command>
+ <option>dev, (host,(port))</option>
+ </term>
+ <listitem>Displays temperature of a selected hard disk
+ drive as reported by the hddtemp daemon running on
+ host:port. Default host is 127.0.0.1, default port is 7634.
+
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>head</option>
+ </command>
+ <option>logfile lines (next_check)</option>
+ </term>
+ <listitem>Displays first N lines of supplied text file. The
+ file is checked every 'next_check' update. If next_check is
+ not supplied, Conky defaults to 2. Max of 30 lines can be
+ displayed, or until the text buffer is filled.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>hr</option>
+ </command>
+ <option>(height)</option>
+ </term>
+ <listitem>Horizontal line, height is the height in pixels
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>hwmon</option>
+ </command>
+ <option>(dev) type n (factor offset)</option>
+ </term>
+ <listitem>Hwmon sensor from sysfs (Linux 2.6). Parameter
+ dev may be omitted if you have only one hwmon device.
+ Parameter type is either 'in' or 'vol' meaning voltage;
+ 'fan' meaning fan; 'temp' meaning temperature. Parameter n
+ is number of the sensor. See /sys/class/hwmon/ on your
+ local computer. The optional arguments 'factor' and
+ 'offset' allow precalculation of the raw input, which is
+ being modified as follows: 'input = input * factor +
+ offset'. Note that they have to be given as decimal values
+ (i.e. contain at least one decimal place).
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>i2c</option>
+ </command>
+ <option>(dev) type n (factor offset)</option>
+ </term>
+ <listitem>I2C sensor from sysfs (Linux 2.6). Parameter dev
+ may be omitted if you have only one I2C device. Parameter
+ type is either 'in' or 'vol' meaning voltage; 'fan' meaning
+ fan; 'temp' meaning temperature. Parameter n is number of
+ the sensor. See /sys/bus/i2c/devices/ on your local
+ computer. The optional arguments 'factor' and 'offset'
+ allow precalculation of the raw input, which is being
+ modified as follows: 'input = input * factor + offset'.
+ Note that they have to be given as decimal values (i.e.
+ contain at least one decimal place).
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>i8k_ac_status</option>
+ </command>
+ <option />
+ </term>
+ <listitem>If running the i8k kernel driver for Inspiron
+ laptops, displays whether ac power is on, as listed in
+ /proc/i8k (translated to human-readable). Beware that this
+ is by default not enabled by i8k itself.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>i8k_bios</option>
+ </command>
+ <option />
+ </term>
+ <listitem>If running the i8k kernel driver for Inspiron
+ laptops, displays the bios version as listed in /proc/i8k.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>i8k_buttons_status</option>
+ </command>
+ <option />
+ </term>
+ <listitem>If running the i8k kernel driver for Inspiron
+ laptops, displays the volume buttons status as listed in
+ /proc/i8k.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>i8k_cpu_temp</option>
+ </command>
+ <option />
+ </term>
+ <listitem>If running the i8k kernel driver for Inspiron
+ laptops, displays the cpu temperature in Celsius, as
+ reported by /proc/i8k.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>i8k_left_fan_rpm</option>
+ </command>
+ <option />
+ </term>
+ <listitem>If running the i8k kernel driver for Inspiron
+ laptops, displays the left fan's rate of rotation, in
+ revolutions per minute as listed in /proc/i8k. Beware, some
+ laptops i8k reports these fans in reverse order.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>i8k_left_fan_status</option>
+ </command>
+ <option />
+ </term>
+ <listitem>If running the i8k kernel driver for Inspiron
+ laptops, displays the left fan status as listed in
+ /proc/i8k (translated to human-readable). Beware, some
+ laptops i8k reports these fans in reverse order.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>i8k_right_fan_rpm</option>
+ </command>
+ <option />
+ </term>
+ <listitem>If running the i8k kernel driver for Inspiron
+ laptops, displays the right fan's rate of rotation, in
+ revolutions per minute as listed in /proc/i8k. Beware, some
+ laptops i8k reports these fans in reverse order.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>i8k_right_fan_status</option>
+ </command>
+ <option />
+ </term>
+ <listitem>If running the i8k kernel driver for Inspiron
+ laptops, displays the right fan status as listed in
+ /proc/i8k (translated to human-readable). Beware, some
+ laptops i8k reports these fans in reverse order.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>i8k_serial</option>
+ </command>
+ <option />
+ </term>
+ <listitem>If running the i8k kernel driver for Inspiron
+ laptops, displays your laptop serial number as listed in
+ /proc/i8k.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>i8k_version</option>
+ </command>
+ <option />
+ </term>
+ <listitem>If running the i8k kernel driver for Inspiron
+ laptops, displays the version formatting of /proc/i8k.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>ibm_brightness</option>
+ </command>
+ </term>
+ <listitem>If running the IBM ACPI, displays the brigtness
+ of the laptops's LCD (0-7).
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>ibm_fan</option>
+ </command>
+ </term>
+ <listitem>If running the IBM ACPI, displays the fan speed.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>ibm_temps</option>
+ </command>
+ <option>N</option>
+ </term>
+ <listitem>If running the IBM ACPI, displays the
+ temperatures from the IBM temperature sensors (N=0..7)
+ Sensor 0 is on the CPU, 3 is on the GPU.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>ibm_volume</option>
+ </command>
+ </term>
+ <listitem>If running the IBM ACPI, displays the "master"
+ volume, controlled by the volume keys (0-14).
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>iconv_start</option>
+ </command>
+ <option>codeset_from codeset_to</option>
+ </term>
+ <listitem>Convert text from one codeset to another using
+ GNU iconv. Needs to be stopped with iconv_stop.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>iconv_stop</option>
+ </command>
+ <option />
+ </term>
+ <listitem>Stop iconv codeset conversion.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>if_empty</option>
+ </command>
+ <option>(var)</option>
+ </term>
+ <listitem>if conky variable VAR is empty, display
+ everything between $if_empty and the matching $endif
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>if_existing</option>
+ </command>
+ <option>file (string)</option>
+ </term>
+ <listitem>if FILE exists, display everything between
+ if_existing and the matching $endif. The optional second
+ paramater checks for FILE containing the specified string
+ and prints everything between $if_existing and the matching
+ $endif.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>if_gw</option>
+ </command>
+ </term>
+ <listitem>if there is at least one default gateway, display
+ everything between $if_gw and the matching $endif
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>if_match</option>
+ </command>
+ <option>expression</option>
+ </term>
+ <listitem>Evaluates the given boolean expression, printing
+ everything between $if_match and the matching $endif
+ depending on whether the evaluation returns true or not.
+ Valid expressions consist of a left side, an operator and a
+ right side. Left and right sides are being parsed for
+ contained text objects before evaluation. Recognised left
+ and right side types are:
+ <simplelist>
+ <member>
+ <command>double</command>Argument consists of only
+ digits and a single dot.</member>
+ <member>
+ <command>long</command>Argument consists of only
+ digits.</member>
+ <member>
+ <command>string</command>Argument is enclosed in
+ quotation mark or the checks for double and long failed
+ before.</member>
+ </simplelist>Valid operands are: '>', '<', '>=',
+ '<=', '==', '!='.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>if_mixer_mute</option>
+ </command>
+ <option>(mixer)</option>
+ </term>
+ <listitem>If mixer exists, display everything between
+ $if_mixer_mute and the matching $endif. If no mixer is
+ specified, "Master" is used.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>if_mounted</option>
+ </command>
+ <option>(mountpoint)</option>
+ </term>
+ <listitem>if MOUNTPOINT is mounted, display everything
+ between $if_mounted and the matching $endif
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>if_mpd_playing</option>
+ </command>
+ </term>
+ <listitem>if mpd is playing or paused, display everything
+ between $if_mpd_playing and the matching $endif
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>if_running</option>
+ </command>
+ <option>(process)</option>
+ </term>
+ <listitem>if PROCESS is running, display everything
+ $if_running and the matching $endif. This uses the
+ ``pidof'' command, so the -x switch is also supported.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>if_smapi_bat_installed</option>
+ </command>
+ <option>(INDEX)</option>
+ </term>
+ <listitem>when using smapi, if the battery with index INDEX
+ is installed, display everything between
+ $if_smapi_bat_installed and the matching $endif
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>if_up</option>
+ </command>
+ <option>(interface)</option>
+ </term>
+ <listitem>if INTERFACE exists and is up, display everything
+ between $if_up and the matching $endif
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>if_updatenr</option>
+ </command>
+ <option>(updatenr)</option>
+ </term>
+ <listitem>If it's the UPDATENR-th time that conky updates,
+ display everything between $if_updatenr and the matching
+ $endif. The counter resets when the highest UPDATENR is
+ reached. Example : "{$if_updatenr 1}foo$endif{$if_updatenr
+ 2}bar$endif{$if_updatenr 4}$endif" shows foo 25% of the
+ time followed by bar 25% of the time followed by nothing
+ the other half of the time.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>if_xmms2_connected</option>
+ </command>
+ </term>
+ <listitem>Display everything between $if_xmms2_connected
+ and the matching $endif if xmms2 is running.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>image</option>
+ </command>
+ <option><path to image> (-p x,y) (-s WxH) (-n)
+ (-f interval)</option>
+ </term>
+ <listitem>Renders an image from the path specified using
+ Imlib2. Takes 4 optional arguments: a position, a size, a
+ no-cache switch, and a cache flush interval. Changing the
+ x,y position will move the position of the image, and
+ changing the WxH will scale the image. If you specify the
+ no-cache flag (-n), the image will not be cached.
+ Alternately, you can specify the -f int switch to specify a
+ cache flust interval for a particular image. Example:
+ ${image /home/brenden/cheeseburger.jpg -p 20,20 -s 200x200}
+ will render 'cheeseburger.jpg' at (20,20) scaled to 200x200
+ pixels. Conky does not make any attempt to adjust the
+ position (or any other formatting) of images, they are just
+ rendered as per the arguments passed. The only reason
+ $image is part of the TEXT section, is to allow for runtime
+ modifications, through $execp $lua_parse, or some other
+ method.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>imap_messages</option>
+ </command>
+ <option>(args)</option>
+ </term>
+ <listitem>Displays the number of messages in your global
+ IMAP inbox by default. You can define individual IMAP
+ inboxes seperately by passing arguments to this object.
+ Arguments are: "host user pass [-i interval (in seconds)]
+ [-f folder] [-p port] [-e command] [-r retries]". Default
+ port is 143, default folder is 'INBOX', default interval is
+ 5 minutes, and default number of retries before giving up
+ is 5. If the password is supplied as '*', you will be
+ prompted to enter the password when Conky starts.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>imap_unseen</option>
+ </command>
+ <option>(args)</option>
+ </term>
+ <listitem>Displays the number of unseen messages in your
+ global IMAP inbox by default. You can define individual
+ IMAP inboxes seperately by passing arguments to this
+ object. Arguments are: "host user pass [-i interval (in
+ seconds)] [-f folder] [-p port] [-e command] [-r retries]".
+ Default port is 143, default folder is 'INBOX', default
+ interval is 5 minutes, and default number of retries before
+ giving up is 5. If the password is supplied as '*', you
+ will be prompted to enter the password when Conky starts.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>include</option>
+ </command>
+ <option>path</option>
+ </term>
+ <listitem>
+ <para>Loads the configfile at path, places the
+ configsettings behind the configsettings in the orginal
+ config and places the vars where the includevar
+ stood.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>ioscheduler</option>
+ </command>
+ <option>disk</option>
+ </term>
+ <listitem>Prints the current ioscheduler used for the given
+ disk name (i.e. e.g. "hda" or "sdb")
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>kernel</option>
+ </command>
+ </term>
+ <listitem>Kernel version
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>laptop_mode</option>
+ </command>
+ </term>
+ <listitem>The value of /proc/sys/vm/laptop_mode
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>lines</option>
+ </command>
+ <option>textfile</option>
+ </term>
+ <listitem>Displays the number of lines in the given file
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>loadavg</option>
+ </command>
+ <option>(1|2|3)</option>
+ </term>
+ <listitem>System load average, 1 is for past 1 minute, 2
+ for past 5 minutes and 3 for past 15 minutes.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>loadgraph</option>
+ </command>
+ <option>(1|2|3) (height),(width) (gradient colour 1)
+ (gradient colour 2) (scale) (-t) (-l)</option>
+ </term>
+ <listitem>Load1 average graph, similar to xload, with
+ optional colours in hex, minus the #. Uses a logarithmic
+ scale (to see small numbers) when you use the -l switch.
+ Takes the switch '-t' to use a temperature gradient, which
+ makes the gradient values change depending on the amplitude
+ of a particular graph value (try it and see).
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>lua</option>
+ </command>
+ <option>function_name (function parameters)</option>
+ </term>
+ <listitem>Executes a Lua function with given parameters,
+ then prints the returned string. See also 'lua_load' on how
+ to load scripts. Conky puts 'conky_' in front of
+ function_name to prevent accidental calls to the wrong
+ function unless you put you place 'conky_' in front of it
+ yourself.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>lua_bar</option>
+ </command>
+ <option>(height, width) function_name (function
+ parameters)</option>
+ </term>
+ <listitem>Executes a Lua function with given parameters and
+ draws a bar. Expects result value to be an integer between
+ 0 and 100. See also 'lua_load' on how to load scripts.
+ Conky puts 'conky_' in front of function_name to prevent
+ accidental calls to the wrong function unless you put you
+ place 'conky_' in front of it yourself.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>lua_gauge</option>
+ </command>
+ <option>(height, width) function_name (function
+ parameters)</option>
+ </term>
+ <listitem>Executes a Lua function with given parameters and
+ draws a gauge. Expects result value to be an integer
+ between 0 and 100. See also 'lua_load' on how to load
+ scripts. Conky puts 'conky_' in front of function_name to
+ prevent accidental calls to the wrong function unless you
+ put you place 'conky_' in front of it yourself.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>lua_graph</option>
+ </command>
+ <option>function_name (height),(width) (gradient colour
+ 1) (gradient colour 2) (scale) (-t) (-l)</option>
+ </term>
+ <listitem>Executes a Lua function with and draws a graph.
+ Expects result value to be any number, and by default will
+ scale to show the full range. See also 'lua_load' on how to
+ load scripts. Takes the switch '-t' to use a temperature
+ gradient, which makes the gradient values change depending
+ on the amplitude of a particular graph value (try it and
+ see). Conky puts 'conky_' in front of function_name to
+ prevent accidental calls to the wrong function unless you
+ put you place 'conky_' in front of it yourself.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>lua_parse</option>
+ </command>
+ <option>function_name (function parameters)</option>
+ </term>
+ <listitem>Executes a Lua function with given parameters as
+ per $lua, then parses and prints the result value as per
+ the syntax for Conky's TEXT section. See also 'lua_load' on
+ how to load scripts. Conky puts 'conky_' in front of
+ function_name to prevent accidental calls to the wrong
+ function unless you put you place 'conky_' in front of it
+ yourself.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>machine</option>
+ </command>
+ </term>
+ <listitem>Machine, i686 for example
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>mails</option>
+ </command>
+ <option>(mailbox)</option>
+ <option>(interval)</option>
+ </term>
+ <listitem>Mail count in the specified mailbox or your mail
+ spool if not. Both mbox and maildir type mailboxes are
+ supported. You can use a program like fetchmail to get
+ mails from some server using your favourite protocol. See
+ also new_mails.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>mboxscan</option>
+ </command>
+ <option>(-n number of messages to print) (-fw from
+ width) (-sw subject width) mbox</option>
+ </term>
+ <listitem>Print a summary of recent messages in an mbox
+ format mailbox. mbox parameter is the filename of the
+ mailbox (can be encapsulated using '"', ie. ${mboxscan -n
+ 10 "/home/brenden/some box"}
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>mem</option>
+ </command>
+ </term>
+ <listitem>Amount of memory in use
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>membar</option>
+ </command>
+ <option>(height),(width)</option>
+ </term>
+ <listitem>Bar that shows amount of memory in use
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>memeasyfree</option>
+ </command>
+ </term>
+ <listitem>Amount of free memory including the memory that
+ is very easily freed (buffers/cache)
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>memfree</option>
+ </command>
+ </term>
+ <listitem>Amount of free memory
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>memgauge</option>
+ </command>
+ <option>(height),(width)</option>
+ </term>
+ <listitem>Gauge that shows amount of memory in use (see
+ cpugauge)
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>memgraph</option>
+ </command>
+ <option>(height),(width) (gradient colour 1) (gradient
+ colour 2) (scale) (-t) (-l)</option>
+ </term>
+ <listitem>Memory usage graph. Uses a logarithmic scale (to
+ see small numbers) when you use the -l switch. Takes the
+ switch '-t' to use a temperature gradient, which makes the
+ gradient values change depending on the amplitude of a
+ particular graph value (try it and see).
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>memmax</option>
+ </command>
+ </term>
+ <listitem>Total amount of memory
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>memperc</option>
+ </command>
+ </term>
+ <listitem>Percentage of memory in use
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>mixer</option>
+ </command>
+ <option>(device)</option>
+ </term>
+ <listitem>Prints the mixer value as reported by the OS.
+ Default mixer is "vol", but you can specify one of the
+ following optional arguments: "vol", "bass", "treble",
+ "synth", "pcm", "speaker", "line", "mic", "cd", "mix",
+ "pcm2", "rec", "igain", "ogain", "line1", "line2", "line3",
+ "dig1", "dig2", "dig3", "phin", "phout", "video", "radio",
+ "monitor". Refer to the definition of SOUND_DEVICE_NAMES in
+ <linux/soundcard.h> (on Linux), <soundcard.h>
+ (on OpenBSD), or <sys/soundcard.h> to find the exact
+ options available on your system.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>mixerbar</option>
+ </command>
+ <option>(device)</option>
+ </term>
+ <listitem>Displays mixer value in a bar as reported by the
+ OS. See docs for $mixer for details on arguments.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>mixerl</option>
+ </command>
+ <option>(device)</option>
+ </term>
+ <listitem>Prints the left channel mixer value as reported
+ by the OS. See docs for $mixer for details on arguments.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>mixerlbar</option>
+ </command>
+ <option>(device)</option>
+ </term>
+ <listitem>Displays the left channel mixer value in a bar as
+ reported by the OS. See docs for $mixer for details on
+ arguments.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>mixerr</option>
+ </command>
+ <option>(device)</option>
+ </term>
+ <listitem>Prints the right channel mixer value as reported
+ by the OS. See docs for $mixer for details on arguments.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>mixerrbar</option>
+ </command>
+ <option>(device)</option>
+ </term>
+ <listitem>Displays the right channel mixer value in a bar
+ as reported by the OS. See docs for $mixer for details on
+ arguments.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>moc_album</option>
+ </command>
+ </term>
+ <listitem>Album of the current MOC song
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>moc_artist</option>
+ </command>
+ </term>
+ <listitem>Artist of the current MOC song
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>moc_bitrate</option>
+ </command>
+ </term>
+ <listitem>Bitrate in the current MOC song
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>moc_curtime</option>
+ </command>
+ </term>
+ <listitem>Current time of the current MOC song
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>moc_file</option>
+ </command>
+ </term>
+ <listitem>File name of the current MOC song
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>moc_rate</option>
+ </command>
+ </term>
+ <listitem>Rate of the current MOC song
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>moc_song</option>
+ </command>
+ </term>
+ <listitem>The current song name being played in MOC.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>moc_state</option>
+ </command>
+ </term>
+ <listitem>Current state of MOC; playing, stopped etc.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>moc_timeleft</option>
+ </command>
+ </term>
+ <listitem>Time left in the current MOC song
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>moc_title</option>
+ </command>
+ </term>
+ <listitem>Title of the current MOC song
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>moc_totaltime</option>
+ </command>
+ </term>
+ <listitem>Total length of the current MOC song
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>monitor</option>
+ </command>
+ </term>
+ <listitem>Number of the monitor on which conky is running
+ or the message "Not running in X" if this is the case.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>monitor_number</option>
+ </command>
+ </term>
+ <listitem>Number of monitors or the message "Not running in
+ X" if this is the case.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>mpd_album</option>
+ </command>
+ </term>
+ <listitem>Album in current MPD song
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>mpd_artist</option>
+ </command>
+ </term>
+ <listitem>Artist in current MPD song must be enabled at
+ compile
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>mpd_bar</option>
+ </command>
+ <option>(height),(width)</option>
+ </term>
+ <listitem>Bar of mpd's progress
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>mpd_bitrate</option>
+ </command>
+ </term>
+ <listitem>Bitrate of current song
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>mpd_elapsed</option>
+ </command>
+ </term>
+ <listitem>Song's elapsed time
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>mpd_file</option>
+ </command>
+ </term>
+ <listitem>Prints the file name of the current MPD song
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>mpd_length</option>
+ </command>
+ </term>
+ <listitem>Song's length
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>mpd_name</option>
+ </command>
+ </term>
+ <listitem>Prints the MPD name field
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>mpd_percent</option>
+ </command>
+ </term>
+ <listitem>Percent of song's progress
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>mpd_random</option>
+ </command>
+ </term>
+ <listitem>Random status (On/Off)
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>mpd_repeat</option>
+ </command>
+ </term>
+ <listitem>Repeat status (On/Off)
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>mpd_smart</option>
+ </command>
+ <option>(max length)</option>
+ </term>
+ <listitem>Prints the song name in either the form "artist -
+ title" or file name, depending on whats available
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>mpd_status</option>
+ </command>
+ </term>
+ <listitem>Playing, stopped, et cetera.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>mpd_title</option>
+ </command>
+ <option>(max length)</option>
+ </term>
+ <listitem>Title of current MPD song
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>mpd_track</option>
+ </command>
+ </term>
+ <listitem>Prints the MPD track field
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>mpd_vol</option>
+ </command>
+ </term>
+ <listitem>MPD's volume
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>nameserver</option>
+ </command>
+ <option>(index)</option>
+ </term>
+ <listitem>Print a nameserver from /etc/resolv.conf. Index
+ starts at and defaults to 0.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>new_mails</option>
+ </command>
+ <option>(mailbox)</option>
+ <option>(interval)</option>
+ </term>
+ <listitem>Unread mail count in the specified mailbox or
+ mail spool if not. Both mbox and maildir type mailboxes are
+ supported.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>nodename</option>
+ </command>
+ </term>
+ <listitem>Hostname
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>nvidia</option>
+ </command>
+ <option>threshold</option>
+ <option>temp</option>
+ <option>ambient</option>
+ <option>gpufreq</option>
+ <option>memfreq</option>
+ <option>imagequality</option>
+ </term>
+ <listitem>Nvidia graficcard support for the XNVCtrl
+ library. Each option can be shortened to the least
+ significant part. Temperatures are printed as float, all
+ other values as integer.
+ <simplelist>
+ <member>
+ <command>threshold</command>The thresholdtemperature at
+ which the gpu slows down</member>
+ <member>
+ <command>temp</command>Tives the gpu current
+ temperature</member>
+ <member>
+ <command>ambient</command>
+ <option>Gives current air temperature near GPU
+ case</option>
+ </member>
+ <member>
+ <command>gpufreq</command>
+ <option>Gives the current gpu frequency</option>
+ </member>
+ <member>
+ <command>memfreq</command>
+ <option>Gives the current mem frequency</option>
+ </member>
+ <member>
+ <command>imagequality</command>
+ <option>Which imagequality should be choosen by
+ OpenGL applications</option>
+ </member>
+ </simplelist>
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>offset</option>
+ </command>
+ <option>(pixels)</option>
+ </term>
+ <listitem>Move text over by N pixels. See also $voffset.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>outlinecolor</option>
+ </command>
+ <option>(color)</option>
+ </term>
+ <listitem>Change outline color
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>pb_battery</option>
+ </command>
+ <option>item</option>
+ </term>
+ <listitem>If running on Apple powerbook/ibook, display
+ information on battery status. The item parameter
+ specifies, what information to display. Exactly one item
+ must be specified. Valid items are:
+ <simplelist>
+ <member>
+ <command>status</command>
+ <option>Display if battery is fully charged,
+ charging, discharging or absent (running on
+ AC)</option>
+ </member>
+ <member>
+ <command>percent</command>
+ <option>Display charge of battery in percent, if
+ charging or discharging. Nothing will be displayed,
+ if battery is fully charged or absent.</option>
+ </member>
+ <member>
+ <command>time</command>
+ <option>Display the time remaining until the
+ battery will be fully charged or discharged at
+ current rate. Nothing is displayed, if battery is
+ absent or if it's present but fully charged and not
+ discharging.</option>
+ </member>
+ </simplelist>
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>platform</option>
+ </command>
+ <option>(dev) type n (factor offset)</option>
+ </term>
+ <listitem>Platform sensor from sysfs (Linux 2.6). Parameter
+ dev may be omitted if you have only one platform device.
+ Platform type is either 'in' or 'vol' meaning voltage;
+ 'fan' meaning fan; 'temp' meaning temperature. Parameter n
+ is number of the sensor. See /sys/bus/platform/devices/ on
+ your local computer. The optional arguments 'factor' and
+ 'offset' allow precalculation of the raw input, which is
+ being modified as follows: 'input = input * factor +
+ offset'. Note that they have to be given as decimal values
+ (i.e. contain at least one decimal place).
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>pop3_unseen</option>
+ </command>
+ <option>(args)</option>
+ </term>
+ <listitem>Displays the number of unseen messages in your
+ global POP3 inbox by default. You can define individual
+ POP3 inboxes seperately by passing arguments to this
+ object. Arguments are: "host user pass [-i interval (in
+ seconds)] [-p port] [-e command] [-r retries]". Default
+ port is 110, default interval is 5 minutes, and default
+ number of retries before giving up is 5. If the password is
+ supplied as '*', you will be prompted to enter the password
+ when Conky starts.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>pop3_used</option>
+ </command>
+ <option>(args)</option>
+ </term>
+ <listitem>Displays the amount of space (in MiB, 2^20) used
+ in your global POP3 inbox by default. You can define
+ individual POP3 inboxes seperately by passing arguments to
+ this object. Arguments are: "host user pass [-i interval
+ (in seconds)] [-p port] [-e command] [-r retries]". Default
+ port is 110, default interval is 5 minutes, and default
+ number of retries before giving up is 5. If the password is
+ supplied as '*', you will be prompted to enter the password
+ when Conky starts.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>pre_exec</option>
+ </command>
+ <option>shell command</option>
+ </term>
+ <listitem>Executes a shell command one time before conky
+ displays anything and puts output as text.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>processes</option>
+ </command>
+ </term>
+ <listitem>Total processes (sleeping and running)
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>read_tcp</option>
+ </command>
+ <option>(host) port</option>
+ </term>
+ <listitem>Connects to a tcp port on a host (default is
+ localhost), reads every char available at the moment and
+ shows them.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>replied_mails</option>
+ </command>
+ <option>(maildir)</option>
+ <option>(interval)</option>
+ </term>
+ <listitem>Number of mails marked as replied in the
+ specified mailbox or mail spool if not. Only maildir type
+ mailboxes are supported, mbox type will return -1.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>rss</option>
+ </command>
+ <option>uri interval_in_minutes action (num_par
+ (spaces_in_front))</option>
+ </term>
+ <listitem>
+ <para>Download and parse RSS feeds. The interval may be
+ a floating point value greater than 0, otherwise
+ defaults to 15 minutes. Action may be one of the
+ following: feed_title, item_title (with num par),
+ item_desc (with num par) and item_titles (when using
+ this action and spaces_in_front is given conky places
+ that many spaces in front of each item). This object is
+ threaded, and once a thread is created it can't be
+ explicitely destroyed. One thread will run for each URI
+ specified. You can use any protocol that Curl
+ supports.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>running_processes</option>
+ </command>
+ </term>
+ <listitem>Running processes (not sleeping), requires Linux
+ 2.6
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>scroll</option>
+ </command>
+ <option>length (step) text</option>
+ </term>
+ <listitem>Scroll 'text' by 'step' characters showing
+ 'length' number of characters at the same time. The text
+ may also contain variables. 'step' is optional and defaults
+ to 1 if not set. If a var creates output on multiple lines
+ then the lines are placed behind each other separated with
+ a '|'-sign. If you change the textcolor inside $scroll it
+ will automatically have it's old value back at the end of
+ $scroll. The end and the start of text will be seperated by
+ 'length' number of spaces.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>seen_mails</option>
+ </command>
+ <option>(maildir)</option>
+ <option>(interval)</option>
+ </term>
+ <listitem>Number of mails marked as seen in the specified
+ mailbox or mail spool if not. Only maildir type mailboxes
+ are supported, mbox type will return -1.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>shadecolor</option>
+ </command>
+ <option>(color)</option>
+ </term>
+ <listitem>Change shading color
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>smapi</option>
+ </command>
+ <option>(ARGS)</option>
+ </term>
+ <listitem>when using smapi, display contents of the
+ /sys/devices/platform/smapi directory. ARGS are either
+ '(FILENAME)' or 'bat (INDEX) (FILENAME)' to display the
+ corresponding files' content. This is a very raw method of
+ accessing the smapi values. When available, better use one
+ of the smapi_* variables instead.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>smapi_bat_bar</option>
+ </command>
+ <option>(INDEX),(height),(width)</option>
+ </term>
+ <listitem>when using smapi, display the remaining capacity
+ of the battery with index INDEX as a bar.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>smapi_bat_perc</option>
+ </command>
+ <option>(INDEX)</option>
+ </term>
+ <listitem>when using smapi, display the remaining capacity
+ in percent of the battery with index INDEX. This is a
+ separate variable because it supports the 'use_spacer'
+ configuration option.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>smapi_bat_power</option>
+ </command>
+ <option>INDEX</option>
+ </term>
+ <listitem>when using smapi, display the current power of
+ the battery with index INDEX in watt. This is a separate
+ variable because the original read out value is being
+ converted from mW. The sign of the output reflects charging
+ (positive) or discharging (negative) state.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>smapi_bat_temp</option>
+ </command>
+ <option>INDEX</option>
+ </term>
+ <listitem>when using smapi, display the current temperature
+ of the battery with index INDEX in degree Celsius. This is
+ a separate variable because the original read out value is
+ being converted from milli degree Celsius.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>sony_fanspeed</option>
+ </command>
+ </term>
+ <listitem>Displays the Sony VAIO fanspeed information if
+ sony-laptop kernel support is enabled. Linux only.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>stippled_hr</option>
+ </command>
+ <option>(space)</option>
+ </term>
+ <listitem>Stippled (dashed) horizontal line
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>swap</option>
+ </command>
+ </term>
+ <listitem>Amount of swap in use
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>swapbar</option>
+ </command>
+ <option>(height),(width)</option>
+ </term>
+ <listitem>Bar that shows amount of swap in use
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>swapfree</option>
+ </command>
+ </term>
+ <listitem>Amount of free swap
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>swapmax</option>
+ </command>
+ </term>
+ <listitem>Total amount of swap
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>swapperc</option>
+ </command>
+ </term>
+ <listitem>Percentage of swap in use
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>sysname</option>
+ </command>
+ </term>
+ <listitem>System name, Linux for example
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>tab</option>
+ </command>
+ <option>(width, (start))</option>
+ </term>
+ <listitem>Puts a tab of the specified width, starting from
+ column 'start'. The unit is pixels for both arguments.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>tail</option>
+ </command>
+ <option>logfile lines (next_check)</option>
+ </term>
+ <listitem>Displays last N lines of supplied text file. The
+ file is checked every 'next_check' update. If next_check is
+ not supplied, Conky defaults to 2. Max of 30 lines can be
+ displayed, or until the text buffer is filled.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>tcp_portmon</option>
+ </command>
+ <option>port_begin port_end item (index)</option>
+ <emphasis>(ip4 only at present)</emphasis>
+ </term>
+ <listitem>
+ <para>TCP port monitor for specified local ports. Port
+ numbers must be in the range 1 to 65535. Valid items
+ are:</para>
+ <simplelist>
+ <member>
+ <command>count</command>
+ <option>Total number of connections in the
+ range</option>
+ </member>
+ <member>
+ <command>rip</command>
+ <option>Remote ip address</option>
+ </member>
+ <member>
+ <command>rhost</command>
+ <option>Remote host name</option>
+ </member>
+ <member>
+ <command>rport</command>
+ <option>Remote port number</option>
+ </member>
+ <member>
+ <command>rservice</command>
+ <option>Remote service name from
+ /etc/services</option>
+ </member>
+ <member>
+ <command>lip</command>
+ <option>Local ip address</option>
+ </member>
+ <member>
+ <command>lhost</command>
+ <option>Local host name</option>
+ </member>
+ <member>
+ <command>lport</command>
+ <option>Local port number</option>
+ </member>
+ <member>
+ <command>lservice</command>
+ <option>Local service name from
+ /etc/services</option>
+ </member>
+ </simplelist>
+ <para>The connection index provides you with access to
+ each connection in the port monitor. The monitor will
+ return information for index values from 0 to n-1
+ connections. Values higher than n-1 are simply ignored.
+ For the "count" item, the connection index must be
+ omitted. It is required for all other items.</para>
+ <para>Examples:</para>
+ <simplelist>
+ <member>
+ <command>${tcp_portmon 6881 6999
+ count}</command>
+ <option>Displays the number of connections in
+ the bittorrent port range</option>
+ </member>
+ <member>
+ <command>${tcp_portmon 22 22 rip 0}</command>
+ <option>Displays the remote host ip of the
+ first sshd connection</option>
+ </member>
+ <member>
+ <command>${tcp_portmon 22 22 rip 9}</command>
+ <option>Displays the remote host ip of the
+ tenth sshd connection</option>
+ </member>
+ <member>
+ <command>${tcp_portmon 1 1024 rhost
+ 0}</command>
+ <option>Displays the remote host name of the
+ first connection on a privileged port</option>
+ </member>
+ <member>
+ <command>${tcp_portmon 1 1024 rport
+ 4}</command>
+ <option>Displays the remote host port of the
+ fifth connection on a privileged port</option>
+ </member>
+ <member>
+ <command>${tcp_portmon 1 65535 lservice
+ 14}</command>
+ <option>Displays the local service name of the
+ fifteenth connection in the range of all
+ ports</option>
+ </member>
+ </simplelist>
+ <para>Note that port monitor variables which share the
+ same port range actually refer to the same monitor, so
+ many references to a single port range for different
+ items and different indexes all use the same monitor
+ internally. In other words, the program avoids creating
+ redundant monitors.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>templateN</option>
+ </command>
+ <option>(arg1)</option>
+ <option>(arg2)</option>
+ <option>(arg3 ...)</option>
+ </term>
+ <listitem>
+ <para>Evaluate the content of the templateN
+ configuration variable (where N is a value between 0
+ and 9, inclusively), applying substitutions as
+ described in the documentation of the corresponding
+ configuration variable. The number of arguments is
+ optional, but must match the highest referred index in
+ the template. You can use the same special sequences in
+ each argument as the ones valid for a template
+ definition, e.g. to allow an argument to contain a
+ whitespace. Also simple nesting of templates is
+ possible this way.</para>
+ <para>Here are some examples of template
+ definitions:</para>
+ <simplelist>
+ <member>template0 $\1\2</member>
+ <member>template1 \1: ${fs_used \2} / ${fs_size
+ \2}</member>
+ <member>template2 \1 \2</member>
+ </simplelist>
+ <para>The following list shows sample usage of the
+ templates defined above, with the equivalent syntax
+ when not using any template at all:</para>
+ <table>
+ <tgroup cols="2">
+ <thead>
+ <row rowsep="1">
+ <entry>using template</entry>
+ <entry>same without template</entry>
+ </row>
+ </thead>
+ <tbody>
+ <row>
+ <entry>${template0 node name}</entry>
+ <entry>$nodename</entry>
+ </row>
+ <row>
+ <entry>${template1 root /}</entry>
+ <entry>root: ${fs_free /} / ${fs_size
+ /}</entry>
+ </row>
+ <row>
+ <entry>
+ <programlisting>${template1
+ ${template2\ disk\ root}
+ /}</programlisting>
+ </entry>
+ <entry>
+ <programlisting>disk root:
+ ${fs_free /} / ${fs_size
+ /}</programlisting>
+ </entry>
+ </row>
+ </tbody>
+ </tgroup>
+ </table>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>texeci</option>
+ </command>
+ <option>interval command</option>
+ </term>
+ <listitem>Runs a command at an interval inside a thread and
+ displays the output. Same as $execi, except the command is
+ run inside a thread. Use this if you have a slow script to
+ keep Conky updating. You should make the interval slightly
+ longer then the time it takes your script to execute. For
+ example, if you have a script that take 5 seconds to
+ execute, you should make the interval at least 6 seconds.
+ See also $execi. This object will clean up the thread when
+ it is destroyed, so it can safely be used in a nested
+ fashion, though it may not produce the desired behaviour if
+ used this way.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>time</option>
+ </command>
+ <option>(format)</option>
+ </term>
+ <listitem>Local time, see man strftime to get more
+ information about format
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>to_bytes</option>
+ </command>
+ <option>size</option>
+ </term>
+ <listitem>If 'size' is a number followed by a size-unit
+ (kilobyte,mb,GiB,...) then it converts the size to bytes
+ and shows it without unit, otherwise it just shows 'size'.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>top</option>
+ </command>
+ <option>type, num</option>
+ </term>
+ <listitem>This takes arguments in the form:top (name)
+ (number) Basically, processes are ranked from highest to
+ lowest in terms of cpu usage, which is what (num)
+ represents. The types are: "name", "pid", "cpu", "mem",
+ "mem_res", "mem_vsize", "time", "io_perc", "io_read" and
+ "io_write". There can be a max of 10 processes listed.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>top_io</option>
+ </command>
+ <option>type, num</option>
+ </term>
+ <listitem>Same as top, except sorted by the amount of I/O
+ the process has done during the update interval
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>top_mem</option>
+ </command>
+ <option>type, num</option>
+ </term>
+ <listitem>Same as top, except sorted by mem usage instead
+ of cpu
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>top_time</option>
+ </command>
+ <option>type, num</option>
+ </term>
+ <listitem>Same as top, except sorted by total CPU time
+ instead of current CPU usage
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>totaldown</option>
+ </command>
+ <option>(net)</option>
+ </term>
+ <listitem>Total download, overflows at 4 GB on Linux with
+ 32-bit arch and there doesn't seem to be a way to know how
+ many times it has already done that before conky has
+ started.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>totalup</option>
+ </command>
+ <option>(net)</option>
+ </term>
+ <listitem>Total upload, this one too, may overflow
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>trashed_mails</option>
+ </command>
+ <option>(maildir)</option>
+ <option>(interval)</option>
+ </term>
+ <listitem>Number of mails marked as trashed in the
+ specified mailbox or mail spool if not. Only maildir type
+ mailboxes are supported, mbox type will return -1.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>tztime</option>
+ </command>
+ <option>(timezone) (format)</option>
+ </term>
+ <listitem>Local time for specified timezone, see man
+ strftime to get more information about format. The timezone
+ argument is specified in similar fashion as TZ environment
+ variable. For hints, look in /usr/share/zoneinfo. e.g.
+ US/Pacific, Europe/Zurich, etc.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>unflagged_mails</option>
+ </command>
+ <option>(maildir)</option>
+ <option>(interval)</option>
+ </term>
+ <listitem>Number of mails not marked as flagged in the
+ specified mailbox or mail spool if not. Only maildir type
+ mailboxes are supported, mbox type will return -1.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>unforwarded_mails</option>
+ </command>
+ <option>(maildir)</option>
+ <option>(interval)</option>
+ </term>
+ <listitem>Number of mails not marked as forwarded in the
+ specified mailbox or mail spool if not. Only maildir type
+ mailboxes are supported, mbox type will return -1.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>unreplied_mails</option>
+ </command>
+ <option>(maildir)</option>
+ <option>(interval)</option>
+ </term>
+ <listitem>Number of mails not marked as replied in the
+ specified mailbox or mail spool if not. Only maildir type
+ mailboxes are supported, mbox type will return -1.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>unseen_mails</option>
+ </command>
+ <option>(maildir)</option>
+ <option>(interval)</option>
+ </term>
+ <listitem>Number of new or unseen mails in the specified
+ mailbox or mail spool if not. Only maildir type mailboxes
+ are supported, mbox type will return -1.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>updates</option>
+ </command>
+ <option>Number of updates</option>
+ </term>
+ <listitem>for debugging
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>upspeed</option>
+ </command>
+ <option>(net)</option>
+ </term>
+ <listitem>Upload speed in suitable IEC units
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>upspeedf</option>
+ </command>
+ <option>(net)</option>
+ </term>
+ <listitem>Upload speed in KiB with one decimal
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>upspeedgraph</option>
+ </command>
+ <option>(netdev) (height),(width) (gradient colour 1)
+ (gradient colour 2) (scale) (-t) (-l)</option>
+ </term>
+ <listitem>Upload speed graph, colours defined in hex, minus
+ the #. If scale is non-zero, it becomes the scale for the
+ graph. Uses a logarithmic scale (to see small numbers) when
+ you use the -l switch. Takes the switch '-t' to use a
+ temperature gradient, which makes the gradient values
+ change depending on the amplitude of a particular graph
+ value (try it and see).
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>uptime</option>
+ </command>
+ </term>
+ <listitem>Uptime
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>uptime_short</option>
+ </command>
+ </term>
+ <listitem>Uptime in a shorter format
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>user_names</option>
+ </command>
+ </term>
+ <listitem>Lists the names of the users logged in
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>user_number</option>
+ </command>
+ </term>
+ <listitem>Number of users logged in
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>user_terms</option>
+ </command>
+ </term>
+ <listitem>Lists the consoles in use
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>user_times</option>
+ </command>
+ </term>
+ <listitem>Lists how long users have been logged in for
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>utime</option>
+ </command>
+ <option>(format)</option>
+ </term>
+ <listitem>Display time in UTC (universal coordinate time).
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>voffset</option>
+ </command>
+ <option>(pixels)</option>
+ </term>
+ <listitem>Change vertical offset by N pixels. Negative
+ values will cause text to overlap. See also $offset.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>voltage_mv</option>
+ </command>
+ <option>(n)</option>
+ </term>
+ <listitem>Returns CPU #n's voltage in mV. CPUs are counted
+ from 1. If omitted, the parameter defaults to 1.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>voltage_v</option>
+ </command>
+ <option>(n)</option>
+ </term>
+ <listitem>Returns CPU #n's voltage in V. CPUs are counted
+ from 1. If omitted, the parameter defaults to 1.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>weather</option>
+ </command>
+ <option>URI locID data_type
+ (interval_in_minutes)</option>
+ </term>
+ <listitem>
+ <para>Download, parse and display METAR data.</para>
+ <para>For the 'URI', there are two
+ possibilities:</para>
+ <simplelist>
+ <member>
+ http://weather.noaa.gov/pub/data/observations/metar/stations/</member>
+ <member>
+ http://xoap.weather.com/weather/local/</member>
+ </simplelist>
+ <para>The first one is free to use but the second
+ requires you to register and obtain your partner ID and
+ license key. These two must be written, separated by a
+ space, into a file called .xoaprc which needs to be
+ placed into your home directory.</para>
+ <para>'locID' must be a valid location identifier for
+ the required uri. For the NOAA site this must be a
+ valid ICAO (see for instance
+ https://pilotweb.nas.faa.gov/qryhtml/icao/). For the
+ weather.com site this must be a valid location ID (see
+ for instance
+ http://aspnetresources.com/tools/locid.aspx).</para>
+ <para>'data_type' must be one of the following:</para>
+ <simplelist>
+ <member>
+ <command>last_update</command>
+ <para>The date and time stamp of the data.
+ The result depends on the URI used. For the
+ NOAA site it is date (yyyy/mm/dd) and UTC time.
+ For the weather.com one it is date
+ ([m]m/[d]d/yy) and Local Time of the
+ station.</para>
+ </member>
+ <member>
+ <command>temperature</command>
+ <para>Air temperature (you can use the
+ 'temperature_unit' config setting to change
+ units)</para>
+ </member>
+ <member>
+ <command>cloud_cover</command>
+ <para>The highest cloud cover status</para>
+ </member>
+ <member>
+ <command>pressure</command>
+ <para>Air pressure in millibar</para>
+ </member>
+ <member>
+ <command>wind_speed</command>
+ <para>Wind speed in km/h</para>
+ </member>
+ <member>
+ <command>wind_dir</command>
+ <para>Wind direction</para>
+ </member>
+ <member>
+ <command>wind_dir_DEG</command>
+ <para>Compass wind direction</para>
+ </member>
+ <member>
+ <command>humidity</command>
+ <para>Relative humidity in %</para>
+ </member>
+ <member>
+ <command>weather</command>
+ <para>Any relevant weather event (rain, snow,
+ etc.). This is not used if you are querying the
+ weather.com site since this data is aggregated
+ into the cloud_cover one</para>
+ </member>
+ <member>
+ <command>icon</command>
+ <para>Weather icon (only for
+ www.weather.com). Can be used together with the
+ icon kit provided upon registering to their
+ service.</para>
+ </member>
+ </simplelist>
+ <para>'delay_in_minutes' (optional, default 30) cannot
+ be less than 30 minutes.</para>
+ <para>This object is threaded, and once a thread is
+ created it can't be explicitely destroyed. One thread
+ will run for each URI specified.</para>
+ <para>Note that these variables are still EXPERIMENTAL
+ and can be subject to many future changes.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>weather_forecast</option>
+ </command>
+ <option>URI locID day data_type
+ (interval_in_minutes)</option>
+ </term>
+ <listitem>
+ <para>Download, parse and display weather forecast data
+ for a given day (daytime only).</para>
+ <para>For the 'URI', for the time being only
+ http://xoap.weather.com/weather/local/ is
+ supported. See 'weather' above for details of usage</para>
+ <para>'locID', see 'weather' above.</para>
+ <para>'day' is a number from 0 (today) to 4 (3 days
+ after tomorrow).</para>
+ <para>'data_type' must be one of the following:</para>
+ <simplelist>
+ <member>
+ <command>low</command>
+ <option>Minimun temperature (you can use the
+ 'temperature_unit' config setting to change
+ units)</option>
+ </member>
+ <member>
+ <command>high</command>
+ <option>Maximum temperature (you can use the
+ 'temperature_unit' config setting to change
+ units)</option>
+ </member>
+ <member>
+ <command>icon</command>
+ <option>Weather icon. Can be used together with the
+ icon kit provided upon registering to the weather.com
+ service</option>
+ </member>
+ <member>
+ <command>forecast</command>
+ <option>Weather forecast (sunny, rainy, etc.)</option>
+ </member>
+ <member>
+ <command>wind_speed</command>
+ <option>Wind speed in km/h</option>
+ </member>
+ <member>
+ <command>wind_dir</command>
+ <option>Wind direction</option>
+ </member>
+ <member>
+ <command>wind_dir_DEG</command>
+ <option>Compass wind direction</option>
+ </member>
+ <member>
+ <command>humidity</command>
+ <option>Relative humidity in %</option>
+ </member>
+ <member>
+ <command>precipitation</command>
+ <option>Probability of having a
+ precipitation (in %)</option>
+ </member>
+ </simplelist>
+ <para>'delay_in_minutes' (optional, default 150) cannot
+ be lower than 150 min.</para>
+ <para>This object is threaded, and once a thread is
+ created it can't be explicitely destroyed. One thread
+ will run for each URI specified. You can use any
+ protocol that Curl supports.</para>
+ <para>Note that these variables are still EXPERIMENTAL
+ and can be subject to many future changes.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>wireless_ap</option>
+ </command>
+ <option>(net)</option>
+ </term>
+ <listitem>Wireless access point MAC address (Linux only)
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>wireless_bitrate</option>
+ </command>
+ <option>(net)</option>
+ </term>
+ <listitem>Wireless bitrate (ie 11 Mb/s) (Linux only)
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>wireless_essid</option>
+ </command>
+ <option>(net)</option>
+ </term>
+ <listitem>Wireless access point ESSID (Linux only)
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>wireless_link_bar</option>
+ </command>
+ <option>(height),(width) (net)</option>
+ </term>
+ <listitem>Wireless link quality bar (Linux only)
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>wireless_link_qual</option>
+ </command>
+ <option>(net)</option>
+ </term>
+ <listitem>Wireless link quality (Linux only)
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>wireless_link_qual_max</option>
+ </command>
+ <option>(net)</option>
+ </term>
+ <listitem>Wireless link quality maximum value (Linux only)
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>wireless_link_qual_perc</option>
+ </command>
+ <option>(net)</option>
+ </term>
+ <listitem>Wireless link quality in percents (Linux only)
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>wireless_mode</option>
+ </command>
+ <option>(net)</option>
+ </term>
+ <listitem>Wireless mode (Managed/Ad-Hoc/Master) (Linux
+ only)
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>words</option>
+ </command>
+ <option>textfile</option>
+ </term>
+ <listitem>Displays the number of words in the given file
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>xmms2_album</option>
+ </command>
+ </term>
+ <listitem>Album in current XMMS2 song
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>xmms2_artist</option>
+ </command>
+ </term>
+ <listitem>Artist in current XMMS2 song
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>xmms2_bar</option>
+ </command>
+ <option>(height),(width)</option>
+ </term>
+ <listitem>Bar of XMMS2's progress
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>xmms2_bitrate</option>
+ </command>
+ </term>
+ <listitem>Bitrate of current song
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>xmms2_comment</option>
+ </command>
+ </term>
+ <listitem>Comment in current XMMS2 song
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>xmms2_date</option>
+ </command>
+ </term>
+ <listitem>Returns song's date.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>xmms2_duration</option>
+ </command>
+ </term>
+ <listitem>Duration of current song
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>xmms2_elapsed</option>
+ </command>
+ </term>
+ <listitem>Song's elapsed time
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>xmms2_genre</option>
+ </command>
+ </term>
+ <listitem>Genre in current XMMS2 song
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>xmms2_id</option>
+ </command>
+ </term>
+ <listitem>XMMS2 id of current song
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>xmms2_percent</option>
+ </command>
+ </term>
+ <listitem>Percent of song's progress
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>xmms2_playlist</option>
+ </command>
+ </term>
+ <listitem>Returns the XMMS2 playlist.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>xmms2_size</option>
+ </command>
+ </term>
+ <listitem>Size of current song
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>xmms2_smart</option>
+ </command>
+ </term>
+ <listitem>Prints the song name in either the form "artist -
+ title" or file name, depending on whats available
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>xmms2_status</option>
+ </command>
+ </term>
+ <listitem>XMMS2 status (Playing, Paused, Stopped, or
+ Disconnected)
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>xmms2_timesplayed</option>
+ </command>
+ </term>
+ <listitem>Number of times a song was played (presumably).
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>xmms2_title</option>
+ </command>
+ </term>
+ <listitem>Title in current XMMS2 song
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>xmms2_tracknr</option>
+ </command>
+ </term>
+ <listitem>Track number in current XMMS2 song
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>xmms2_url</option>
+ </command>
+ </term>
+ <listitem>Full path to current song
+ <para /></listitem>
+ </varlistentry>
</variablelist>
projects / monky / blobdiff