/*
- * QEMU ESP emulation
- *
+ * QEMU ESP/NCR53C9x emulation
+ *
* Copyright (c) 2005-2006 Fabrice Bellard
- *
+ *
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
-#include "vl.h"
+
+#include "sysbus.h"
+#include "scsi-disk.h"
+#include "scsi.h"
/* debug ESP card */
//#define DEBUG_ESP
+/*
+ * On Sparc32, this is the ESP (NCR53C90) part of chip STP2000 (Master I/O),
+ * also produced as NCR89C100. See
+ * http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/NCR89C100.txt
+ * and
+ * http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/NCR53C9X.txt
+ */
+
#ifdef DEBUG_ESP
-#define DPRINTF(fmt, args...) \
-do { printf("ESP: " fmt , ##args); } while (0)
-#define pic_set_irq(irq, level) \
-do { printf("ESP: set_irq(%d): %d\n", (irq), (level)); pic_set_irq((irq),(level));} while (0)
+#define DPRINTF(fmt, ...) \
+ do { printf("ESP: " fmt , ## __VA_ARGS__); } while (0)
#else
-#define DPRINTF(fmt, args...)
+#define DPRINTF(fmt, ...) do {} while (0)
#endif
-#define ESPDMA_REGS 4
-#define ESPDMA_MAXADDR (ESPDMA_REGS * 4 - 1)
-#define ESP_MAXREG 0x3f
-#define TI_BUFSZ 32
-#define DMA_VER 0xa0000000
-#define DMA_INTR 1
-#define DMA_INTREN 0x10
-#define DMA_WRITE_MEM 0x100
-#define DMA_LOADED 0x04000000
+#define ESP_ERROR(fmt, ...) \
+ do { printf("ESP ERROR: %s: " fmt, __func__ , ## __VA_ARGS__); } while (0)
+
+#define ESP_REGS 16
+#define TI_BUFSZ 16
+
typedef struct ESPState ESPState;
struct ESPState {
- BlockDriverState **bd;
- uint8_t rregs[ESP_MAXREG];
- uint8_t wregs[ESP_MAXREG];
- int irq;
- uint32_t espdmaregs[ESPDMA_REGS];
- uint32_t ti_size;
+ SysBusDevice busdev;
+ uint32_t it_shift;
+ qemu_irq irq;
+ uint8_t rregs[ESP_REGS];
+ uint8_t wregs[ESP_REGS];
+ int32_t ti_size;
uint32_t ti_rptr, ti_wptr;
uint8_t ti_buf[TI_BUFSZ];
- int dma;
- SCSIDevice *scsi_dev[MAX_DISKS];
+ uint32_t sense;
+ uint32_t dma;
+ SCSIDevice *scsi_dev[ESP_MAX_DEVS];
SCSIDevice *current_dev;
+ uint8_t cmdbuf[TI_BUFSZ];
+ uint32_t cmdlen;
+ uint32_t do_cmd;
+
+ /* The amount of data left in the current DMA transfer. */
+ uint32_t dma_left;
+ /* The size of the current DMA transfer. Zero if no transfer is in
+ progress. */
+ uint32_t dma_counter;
+ uint8_t *async_buf;
+ uint32_t async_len;
+
+ espdma_memory_read_write dma_memory_read;
+ espdma_memory_read_write dma_memory_write;
+ void *dma_opaque;
};
+#define ESP_TCLO 0x0
+#define ESP_TCMID 0x1
+#define ESP_FIFO 0x2
+#define ESP_CMD 0x3
+#define ESP_RSTAT 0x4
+#define ESP_WBUSID 0x4
+#define ESP_RINTR 0x5
+#define ESP_WSEL 0x5
+#define ESP_RSEQ 0x6
+#define ESP_WSYNTP 0x6
+#define ESP_RFLAGS 0x7
+#define ESP_WSYNO 0x7
+#define ESP_CFG1 0x8
+#define ESP_RRES1 0x9
+#define ESP_WCCF 0x9
+#define ESP_RRES2 0xa
+#define ESP_WTEST 0xa
+#define ESP_CFG2 0xb
+#define ESP_CFG3 0xc
+#define ESP_RES3 0xd
+#define ESP_TCHI 0xe
+#define ESP_RES4 0xf
+
+#define CMD_DMA 0x80
+#define CMD_CMD 0x7f
+
+#define CMD_NOP 0x00
+#define CMD_FLUSH 0x01
+#define CMD_RESET 0x02
+#define CMD_BUSRESET 0x03
+#define CMD_TI 0x10
+#define CMD_ICCS 0x11
+#define CMD_MSGACC 0x12
+#define CMD_SATN 0x1a
+#define CMD_SELATN 0x42
+#define CMD_SELATNS 0x43
+#define CMD_ENSEL 0x44
+
#define STAT_DO 0x00
#define STAT_DI 0x01
#define STAT_CD 0x02
#define STAT_ST 0x03
-#define STAT_MI 0x06
-#define STAT_MO 0x07
+#define STAT_MO 0x06
+#define STAT_MI 0x07
+#define STAT_PIO_MASK 0x06
#define STAT_TC 0x10
-#define STAT_IN 0x80
+#define STAT_PE 0x20
+#define STAT_GE 0x40
+#define STAT_INT 0x80
+
+#define BUSID_DID 0x07
#define INTR_FC 0x08
#define INTR_BS 0x10
#define SEQ_0 0x0
#define SEQ_CD 0x4
-static void handle_satn(ESPState *s)
+#define CFG1_RESREPT 0x40
+
+#define TCHI_FAS100A 0x4
+
+static void esp_raise_irq(ESPState *s)
{
- uint8_t buf[32];
- uint32_t dmaptr, dmalen;
+ if (!(s->rregs[ESP_RSTAT] & STAT_INT)) {
+ s->rregs[ESP_RSTAT] |= STAT_INT;
+ qemu_irq_raise(s->irq);
+ }
+}
+
+static void esp_lower_irq(ESPState *s)
+{
+ if (s->rregs[ESP_RSTAT] & STAT_INT) {
+ s->rregs[ESP_RSTAT] &= ~STAT_INT;
+ qemu_irq_lower(s->irq);
+ }
+}
+
+static uint32_t get_cmd(ESPState *s, uint8_t *buf)
+{
+ uint32_t dmalen;
int target;
- int32_t datalen;
- dmalen = s->wregs[0] | (s->wregs[1] << 8);
- target = s->wregs[4] & 7;
- DPRINTF("Select with ATN len %d target %d\n", dmalen, target);
+ target = s->wregs[ESP_WBUSID] & BUSID_DID;
if (s->dma) {
- dmaptr = iommu_translate(s->espdmaregs[1]);
- DPRINTF("DMA Direction: %c, addr 0x%8.8x\n",
- s->espdmaregs[0] & DMA_WRITE_MEM ? 'w': 'r', dmaptr);
- cpu_physical_memory_read(dmaptr, buf, dmalen);
+ dmalen = s->rregs[ESP_TCLO] | (s->rregs[ESP_TCMID] << 8);
+ s->dma_memory_read(s->dma_opaque, buf, dmalen);
} else {
- buf[0] = 0;
- memcpy(&buf[1], s->ti_buf, dmalen);
- dmalen++;
+ dmalen = s->ti_size;
+ memcpy(buf, s->ti_buf, dmalen);
+ buf[0] = 0;
}
+ DPRINTF("get_cmd: len %d target %d\n", dmalen, target);
s->ti_size = 0;
s->ti_rptr = 0;
s->ti_wptr = 0;
- if (target >= 4 || !s->scsi_dev[target]) {
+ if (s->current_dev) {
+ /* Started a new command before the old one finished. Cancel it. */
+ s->current_dev->cancel_io(s->current_dev, 0);
+ s->async_len = 0;
+ }
+
+ if (target >= ESP_MAX_DEVS || !s->scsi_dev[target]) {
// No such drive
- s->rregs[4] = STAT_IN;
- s->rregs[5] = INTR_DC;
- s->rregs[6] = SEQ_0;
- s->espdmaregs[0] |= DMA_INTR;
- pic_set_irq(s->irq, 1);
- return;
+ s->rregs[ESP_RSTAT] = 0;
+ s->rregs[ESP_RINTR] = INTR_DC;
+ s->rregs[ESP_RSEQ] = SEQ_0;
+ esp_raise_irq(s);
+ return 0;
}
s->current_dev = s->scsi_dev[target];
- datalen = scsi_send_command(s->current_dev, 0, &buf[1]);
- if (datalen == 0) {
- s->ti_size = 0;
- } else {
- s->rregs[4] = STAT_IN | STAT_TC;
+ return dmalen;
+}
+
+static void do_cmd(ESPState *s, uint8_t *buf)
+{
+ int32_t datalen;
+ int lun;
+
+ DPRINTF("do_cmd: busid 0x%x\n", buf[0]);
+ lun = buf[0] & 7;
+ datalen = s->current_dev->send_command(s->current_dev, 0, &buf[1], lun);
+ s->ti_size = datalen;
+ if (datalen != 0) {
+ s->rregs[ESP_RSTAT] = STAT_TC;
+ s->dma_left = 0;
+ s->dma_counter = 0;
if (datalen > 0) {
- s->rregs[4] |= STAT_DI;
- s->ti_size = datalen;
+ s->rregs[ESP_RSTAT] |= STAT_DI;
+ s->current_dev->read_data(s->current_dev, 0);
} else {
- s->rregs[4] |= STAT_DO;
- s->ti_size = -datalen;
+ s->rregs[ESP_RSTAT] |= STAT_DO;
+ s->current_dev->write_data(s->current_dev, 0);
}
}
- s->rregs[5] = INTR_BS | INTR_FC;
- s->rregs[6] = SEQ_CD;
- s->espdmaregs[0] |= DMA_INTR;
- pic_set_irq(s->irq, 1);
+ s->rregs[ESP_RINTR] = INTR_BS | INTR_FC;
+ s->rregs[ESP_RSEQ] = SEQ_CD;
+ esp_raise_irq(s);
}
-static void dma_write(ESPState *s, const uint8_t *buf, uint32_t len)
+static void handle_satn(ESPState *s)
{
- uint32_t dmaptr;
+ uint8_t buf[32];
+ int len;
+
+ len = get_cmd(s, buf);
+ if (len)
+ do_cmd(s, buf);
+}
- DPRINTF("Transfer status len %d\n", len);
+static void handle_satn_stop(ESPState *s)
+{
+ s->cmdlen = get_cmd(s, s->cmdbuf);
+ if (s->cmdlen) {
+ DPRINTF("Set ATN & Stop: cmdlen %d\n", s->cmdlen);
+ s->do_cmd = 1;
+ s->rregs[ESP_RSTAT] = STAT_TC | STAT_CD;
+ s->rregs[ESP_RINTR] = INTR_BS | INTR_FC;
+ s->rregs[ESP_RSEQ] = SEQ_CD;
+ esp_raise_irq(s);
+ }
+}
+
+static void write_response(ESPState *s)
+{
+ DPRINTF("Transfer status (sense=%d)\n", s->sense);
+ s->ti_buf[0] = s->sense;
+ s->ti_buf[1] = 0;
if (s->dma) {
- dmaptr = iommu_translate(s->espdmaregs[1]);
- DPRINTF("DMA Direction: %c\n",
- s->espdmaregs[0] & DMA_WRITE_MEM ? 'w': 'r');
- cpu_physical_memory_write(dmaptr, buf, len);
- s->rregs[4] = STAT_IN | STAT_TC | STAT_ST;
- s->rregs[5] = INTR_BS | INTR_FC;
- s->rregs[6] = SEQ_CD;
+ s->dma_memory_write(s->dma_opaque, s->ti_buf, 2);
+ s->rregs[ESP_RSTAT] = STAT_TC | STAT_ST;
+ s->rregs[ESP_RINTR] = INTR_BS | INTR_FC;
+ s->rregs[ESP_RSEQ] = SEQ_CD;
} else {
- memcpy(s->ti_buf, buf, len);
- s->ti_size = len;
- s->ti_rptr = 0;
- s->ti_wptr = 0;
- s->rregs[7] = len;
+ s->ti_size = 2;
+ s->ti_rptr = 0;
+ s->ti_wptr = 0;
+ s->rregs[ESP_RFLAGS] = 2;
}
- s->espdmaregs[0] |= DMA_INTR;
- pic_set_irq(s->irq, 1);
+ esp_raise_irq(s);
+}
+static void esp_dma_done(ESPState *s)
+{
+ s->rregs[ESP_RSTAT] |= STAT_TC;
+ s->rregs[ESP_RINTR] = INTR_BS;
+ s->rregs[ESP_RSEQ] = 0;
+ s->rregs[ESP_RFLAGS] = 0;
+ s->rregs[ESP_TCLO] = 0;
+ s->rregs[ESP_TCMID] = 0;
+ esp_raise_irq(s);
}
-static const uint8_t okbuf[] = {0, 0};
+static void esp_do_dma(ESPState *s)
+{
+ uint32_t len;
+ int to_device;
-static void esp_command_complete(void *opaque, uint32_t tag, int fail)
+ to_device = (s->ti_size < 0);
+ len = s->dma_left;
+ if (s->do_cmd) {
+ DPRINTF("command len %d + %d\n", s->cmdlen, len);
+ s->dma_memory_read(s->dma_opaque, &s->cmdbuf[s->cmdlen], len);
+ s->ti_size = 0;
+ s->cmdlen = 0;
+ s->do_cmd = 0;
+ do_cmd(s, s->cmdbuf);
+ return;
+ }
+ if (s->async_len == 0) {
+ /* Defer until data is available. */
+ return;
+ }
+ if (len > s->async_len) {
+ len = s->async_len;
+ }
+ if (to_device) {
+ s->dma_memory_read(s->dma_opaque, s->async_buf, len);
+ } else {
+ s->dma_memory_write(s->dma_opaque, s->async_buf, len);
+ }
+ s->dma_left -= len;
+ s->async_buf += len;
+ s->async_len -= len;
+ if (to_device)
+ s->ti_size += len;
+ else
+ s->ti_size -= len;
+ if (s->async_len == 0) {
+ if (to_device) {
+ // ti_size is negative
+ s->current_dev->write_data(s->current_dev, 0);
+ } else {
+ s->current_dev->read_data(s->current_dev, 0);
+ /* If there is still data to be read from the device then
+ complete the DMA operation immediately. Otherwise defer
+ until the scsi layer has completed. */
+ if (s->dma_left == 0 && s->ti_size > 0) {
+ esp_dma_done(s);
+ }
+ }
+ } else {
+ /* Partially filled a scsi buffer. Complete immediately. */
+ esp_dma_done(s);
+ }
+}
+
+static void esp_command_complete(void *opaque, int reason, uint32_t tag,
+ uint32_t arg)
{
ESPState *s = (ESPState *)opaque;
- DPRINTF("SCSI Command complete\n");
- if (s->ti_size != 0)
- DPRINTF("SCSI command completed unexpectedly\n");
- s->ti_size = 0;
- /* ??? Report failures. */
- if (fail)
- DPRINTF("Command failed\n");
- s->rregs[4] = STAT_IN | STAT_TC | STAT_ST;
+ if (reason == SCSI_REASON_DONE) {
+ DPRINTF("SCSI Command complete\n");
+ if (s->ti_size != 0)
+ DPRINTF("SCSI command completed unexpectedly\n");
+ s->ti_size = 0;
+ s->dma_left = 0;
+ s->async_len = 0;
+ if (arg)
+ DPRINTF("Command failed\n");
+ s->sense = arg;
+ s->rregs[ESP_RSTAT] = STAT_ST;
+ esp_dma_done(s);
+ s->current_dev = NULL;
+ } else {
+ DPRINTF("transfer %d/%d\n", s->dma_left, s->ti_size);
+ s->async_len = arg;
+ s->async_buf = s->current_dev->get_buf(s->current_dev, 0);
+ if (s->dma_left) {
+ esp_do_dma(s);
+ } else if (s->dma_counter != 0 && s->ti_size <= 0) {
+ /* If this was the last part of a DMA transfer then the
+ completion interrupt is deferred to here. */
+ esp_dma_done(s);
+ }
+ }
}
static void handle_ti(ESPState *s)
{
- uint32_t dmaptr, dmalen, minlen, len, from, to;
- unsigned int i;
- int to_device;
- uint8_t buf[TARGET_PAGE_SIZE];
+ uint32_t dmalen, minlen;
- dmalen = s->wregs[0] | (s->wregs[1] << 8);
+ dmalen = s->rregs[ESP_TCLO] | (s->rregs[ESP_TCMID] << 8);
if (dmalen==0) {
dmalen=0x10000;
}
-
- minlen = (dmalen < s->ti_size) ? dmalen : s->ti_size;
+ s->dma_counter = dmalen;
+
+ if (s->do_cmd)
+ minlen = (dmalen < 32) ? dmalen : 32;
+ else if (s->ti_size < 0)
+ minlen = (dmalen < -s->ti_size) ? dmalen : -s->ti_size;
+ else
+ minlen = (dmalen < s->ti_size) ? dmalen : s->ti_size;
DPRINTF("Transfer Information len %d\n", minlen);
if (s->dma) {
- dmaptr = iommu_translate(s->espdmaregs[1]);
- /* Check if the transfer writes to to reads from the device. */
- to_device = (s->espdmaregs[0] & DMA_WRITE_MEM) == 0;
- DPRINTF("DMA Direction: %c, addr 0x%8.8x %08x\n",
- to_device ? 'r': 'w', dmaptr, s->ti_size);
- from = s->espdmaregs[1];
- to = from + minlen;
- for (i = 0; i < minlen; i += len, from += len) {
- dmaptr = iommu_translate(s->espdmaregs[1] + i);
- if ((from & TARGET_PAGE_MASK) != (to & TARGET_PAGE_MASK)) {
- len = TARGET_PAGE_SIZE - (from & ~TARGET_PAGE_MASK);
- } else {
- len = to - from;
- }
- DPRINTF("DMA address p %08x v %08x len %08x, from %08x, to %08x\n", dmaptr, s->espdmaregs[1] + i, len, from, to);
- s->ti_size -= len;
- if (to_device) {
- cpu_physical_memory_read(dmaptr, buf, len);
- scsi_write_data(s->current_dev, buf, len);
- } else {
- scsi_read_data(s->current_dev, buf, len);
- cpu_physical_memory_write(dmaptr, buf, len);
- }
- }
- if (s->ti_size) {
- s->rregs[4] = STAT_IN | STAT_TC | (to_device ? STAT_DO : STAT_DI);
- }
- s->rregs[5] = INTR_BS;
- s->rregs[6] = 0;
- s->rregs[7] = 0;
- s->espdmaregs[0] |= DMA_INTR;
- }
- pic_set_irq(s->irq, 1);
+ s->dma_left = minlen;
+ s->rregs[ESP_RSTAT] &= ~STAT_TC;
+ esp_do_dma(s);
+ } else if (s->do_cmd) {
+ DPRINTF("command len %d\n", s->cmdlen);
+ s->ti_size = 0;
+ s->cmdlen = 0;
+ s->do_cmd = 0;
+ do_cmd(s, s->cmdbuf);
+ return;
+ }
}
static void esp_reset(void *opaque)
{
ESPState *s = opaque;
- memset(s->rregs, 0, ESP_MAXREG);
- memset(s->wregs, 0, ESP_MAXREG);
- s->rregs[0x0e] = 0x4; // Indicate fas100a
- memset(s->espdmaregs, 0, ESPDMA_REGS * 4);
+
+ esp_lower_irq(s);
+
+ memset(s->rregs, 0, ESP_REGS);
+ memset(s->wregs, 0, ESP_REGS);
+ s->rregs[ESP_TCHI] = TCHI_FAS100A; // Indicate fas100a
s->ti_size = 0;
s->ti_rptr = 0;
s->ti_wptr = 0;
s->dma = 0;
+ s->do_cmd = 0;
+
+ s->rregs[ESP_CFG1] = 7;
+}
+
+static void parent_esp_reset(void *opaque, int irq, int level)
+{
+ if (level)
+ esp_reset(opaque);
}
static uint32_t esp_mem_readb(void *opaque, target_phys_addr_t addr)
ESPState *s = opaque;
uint32_t saddr;
- saddr = (addr & ESP_MAXREG) >> 2;
+ saddr = addr >> s->it_shift;
DPRINTF("read reg[%d]: 0x%2.2x\n", saddr, s->rregs[saddr]);
switch (saddr) {
- case 2:
- // FIFO
- if (s->ti_size > 0) {
- s->ti_size--;
- if ((s->rregs[4] & 6) == 0) {
- /* Data in/out. */
- scsi_read_data(s->current_dev, &s->rregs[2], 0);
+ case ESP_FIFO:
+ if (s->ti_size > 0) {
+ s->ti_size--;
+ if ((s->rregs[ESP_RSTAT] & STAT_PIO_MASK) == 0) {
+ /* Data out. */
+ ESP_ERROR("PIO data read not implemented\n");
+ s->rregs[ESP_FIFO] = 0;
} else {
- s->rregs[2] = s->ti_buf[s->ti_rptr++];
+ s->rregs[ESP_FIFO] = s->ti_buf[s->ti_rptr++];
}
- pic_set_irq(s->irq, 1);
- }
- if (s->ti_size == 0) {
+ esp_raise_irq(s);
+ }
+ if (s->ti_size == 0) {
s->ti_rptr = 0;
s->ti_wptr = 0;
}
- break;
- case 5:
- // interrupt
- // Clear status bits except TC
- s->rregs[4] &= STAT_TC;
- pic_set_irq(s->irq, 0);
- s->espdmaregs[0] &= ~DMA_INTR;
+ break;
+ case ESP_RINTR:
+ // Clear interrupt/error status bits
+ s->rregs[ESP_RSTAT] &= ~(STAT_GE | STAT_PE);
+ esp_lower_irq(s);
break;
default:
- break;
+ break;
}
return s->rregs[saddr];
}
ESPState *s = opaque;
uint32_t saddr;
- saddr = (addr & ESP_MAXREG) >> 2;
- DPRINTF("write reg[%d]: 0x%2.2x -> 0x%2.2x\n", saddr, s->wregs[saddr], val);
+ saddr = addr >> s->it_shift;
+ DPRINTF("write reg[%d]: 0x%2.2x -> 0x%2.2x\n", saddr, s->wregs[saddr],
+ val);
switch (saddr) {
- case 0:
- case 1:
- s->rregs[saddr] = val;
+ case ESP_TCLO:
+ case ESP_TCMID:
+ s->rregs[ESP_RSTAT] &= ~STAT_TC;
break;
- case 2:
- // FIFO
- if ((s->rregs[4] & 6) == 0) {
- uint8_t buf;
- buf = val & 0xff;
- s->ti_size--;
- scsi_write_data(s->current_dev, &buf, 0);
+ case ESP_FIFO:
+ if (s->do_cmd) {
+ s->cmdbuf[s->cmdlen++] = val & 0xff;
+ } else if (s->ti_size == TI_BUFSZ - 1) {
+ ESP_ERROR("fifo overrun\n");
} else {
s->ti_size++;
s->ti_buf[s->ti_wptr++] = val & 0xff;
}
- break;
- case 3:
+ break;
+ case ESP_CMD:
s->rregs[saddr] = val;
- // Command
- if (val & 0x80) {
- s->dma = 1;
- } else {
- s->dma = 0;
- }
- switch(val & 0x7f) {
- case 0:
- DPRINTF("NOP (%2.2x)\n", val);
- break;
- case 1:
- DPRINTF("Flush FIFO (%2.2x)\n", val);
+ if (val & CMD_DMA) {
+ s->dma = 1;
+ /* Reload DMA counter. */
+ s->rregs[ESP_TCLO] = s->wregs[ESP_TCLO];
+ s->rregs[ESP_TCMID] = s->wregs[ESP_TCMID];
+ } else {
+ s->dma = 0;
+ }
+ switch(val & CMD_CMD) {
+ case CMD_NOP:
+ DPRINTF("NOP (%2.2x)\n", val);
+ break;
+ case CMD_FLUSH:
+ DPRINTF("Flush FIFO (%2.2x)\n", val);
//s->ti_size = 0;
- s->rregs[5] = INTR_FC;
- s->rregs[6] = 0;
- break;
- case 2:
- DPRINTF("Chip reset (%2.2x)\n", val);
- esp_reset(s);
- break;
- case 3:
- DPRINTF("Bus reset (%2.2x)\n", val);
- s->rregs[5] = INTR_RST;
- if (!(s->wregs[8] & 0x40)) {
- s->espdmaregs[0] |= DMA_INTR;
- pic_set_irq(s->irq, 1);
+ s->rregs[ESP_RINTR] = INTR_FC;
+ s->rregs[ESP_RSEQ] = 0;
+ s->rregs[ESP_RFLAGS] = 0;
+ break;
+ case CMD_RESET:
+ DPRINTF("Chip reset (%2.2x)\n", val);
+ esp_reset(s);
+ break;
+ case CMD_BUSRESET:
+ DPRINTF("Bus reset (%2.2x)\n", val);
+ s->rregs[ESP_RINTR] = INTR_RST;
+ if (!(s->wregs[ESP_CFG1] & CFG1_RESREPT)) {
+ esp_raise_irq(s);
}
- break;
- case 0x10:
- handle_ti(s);
- break;
- case 0x11:
- DPRINTF("Initiator Command Complete Sequence (%2.2x)\n", val);
- dma_write(s, okbuf, 2);
- break;
- case 0x12:
- DPRINTF("Message Accepted (%2.2x)\n", val);
- dma_write(s, okbuf, 2);
- s->rregs[5] = INTR_DC;
- s->rregs[6] = 0;
- break;
- case 0x1a:
- DPRINTF("Set ATN (%2.2x)\n", val);
- break;
- case 0x42:
- handle_satn(s);
- break;
- case 0x43:
- DPRINTF("Set ATN & stop (%2.2x)\n", val);
- handle_satn(s);
- break;
- default:
- DPRINTF("Unhandled ESP command (%2.2x)\n", val);
- break;
- }
- break;
- case 4 ... 7:
- break;
- case 8:
- s->rregs[saddr] = val;
+ break;
+ case CMD_TI:
+ handle_ti(s);
+ break;
+ case CMD_ICCS:
+ DPRINTF("Initiator Command Complete Sequence (%2.2x)\n", val);
+ write_response(s);
+ s->rregs[ESP_RINTR] = INTR_FC;
+ s->rregs[ESP_RSTAT] |= STAT_MI;
+ break;
+ case CMD_MSGACC:
+ DPRINTF("Message Accepted (%2.2x)\n", val);
+ write_response(s);
+ s->rregs[ESP_RINTR] = INTR_DC;
+ s->rregs[ESP_RSEQ] = 0;
+ break;
+ case CMD_SATN:
+ DPRINTF("Set ATN (%2.2x)\n", val);
+ break;
+ case CMD_SELATN:
+ DPRINTF("Set ATN (%2.2x)\n", val);
+ handle_satn(s);
+ break;
+ case CMD_SELATNS:
+ DPRINTF("Set ATN & stop (%2.2x)\n", val);
+ handle_satn_stop(s);
+ break;
+ case CMD_ENSEL:
+ DPRINTF("Enable selection (%2.2x)\n", val);
+ s->rregs[ESP_RINTR] = 0;
+ break;
+ default:
+ ESP_ERROR("Unhandled ESP command (%2.2x)\n", val);
+ break;
+ }
break;
- case 9 ... 10:
+ case ESP_WBUSID ... ESP_WSYNO:
+ break;
+ case ESP_CFG1:
+ s->rregs[saddr] = val;
break;
- case 11:
- s->rregs[saddr] = val & 0x15;
+ case ESP_WCCF ... ESP_WTEST:
break;
- case 12 ... 15:
+ case ESP_CFG2 ... ESP_RES4:
s->rregs[saddr] = val;
break;
default:
- break;
+ ESP_ERROR("invalid write of 0x%02x at [0x%x]\n", val, saddr);
+ return;
}
s->wregs[saddr] = val;
}
static CPUReadMemoryFunc *esp_mem_read[3] = {
esp_mem_readb,
- esp_mem_readb,
- esp_mem_readb,
+ NULL,
+ NULL,
};
static CPUWriteMemoryFunc *esp_mem_write[3] = {
esp_mem_writeb,
- esp_mem_writeb,
+ NULL,
esp_mem_writeb,
};
-static uint32_t espdma_mem_readl(void *opaque, target_phys_addr_t addr)
-{
- ESPState *s = opaque;
- uint32_t saddr;
-
- saddr = (addr & ESPDMA_MAXADDR) >> 2;
- DPRINTF("read dmareg[%d]: 0x%8.8x\n", saddr, s->espdmaregs[saddr]);
-
- return s->espdmaregs[saddr];
-}
-
-static void espdma_mem_writel(void *opaque, target_phys_addr_t addr, uint32_t val)
-{
- ESPState *s = opaque;
- uint32_t saddr;
-
- saddr = (addr & ESPDMA_MAXADDR) >> 2;
- DPRINTF("write dmareg[%d]: 0x%8.8x -> 0x%8.8x\n", saddr, s->espdmaregs[saddr], val);
- switch (saddr) {
- case 0:
- if (!(val & DMA_INTREN))
- pic_set_irq(s->irq, 0);
- if (val & 0x80) {
- esp_reset(s);
- } else if (val & 0x40) {
- val &= ~0x40;
- } else if (val == 0)
- val = 0x40;
- val &= 0x0fffffff;
- val |= DMA_VER;
- break;
- case 1:
- s->espdmaregs[0] |= DMA_LOADED;
- break;
- default:
- break;
- }
- s->espdmaregs[saddr] = val;
-}
-
-static CPUReadMemoryFunc *espdma_mem_read[3] = {
- espdma_mem_readl,
- espdma_mem_readl,
- espdma_mem_readl,
-};
-
-static CPUWriteMemoryFunc *espdma_mem_write[3] = {
- espdma_mem_writel,
- espdma_mem_writel,
- espdma_mem_writel,
-};
-
static void esp_save(QEMUFile *f, void *opaque)
{
ESPState *s = opaque;
- unsigned int i;
-
- qemu_put_buffer(f, s->rregs, ESP_MAXREG);
- qemu_put_buffer(f, s->wregs, ESP_MAXREG);
- qemu_put_be32s(f, &s->irq);
- for (i = 0; i < ESPDMA_REGS; i++)
- qemu_put_be32s(f, &s->espdmaregs[i]);
- qemu_put_be32s(f, &s->ti_size);
+
+ qemu_put_buffer(f, s->rregs, ESP_REGS);
+ qemu_put_buffer(f, s->wregs, ESP_REGS);
+ qemu_put_sbe32s(f, &s->ti_size);
qemu_put_be32s(f, &s->ti_rptr);
qemu_put_be32s(f, &s->ti_wptr);
qemu_put_buffer(f, s->ti_buf, TI_BUFSZ);
+ qemu_put_be32s(f, &s->sense);
qemu_put_be32s(f, &s->dma);
+ qemu_put_buffer(f, s->cmdbuf, TI_BUFSZ);
+ qemu_put_be32s(f, &s->cmdlen);
+ qemu_put_be32s(f, &s->do_cmd);
+ qemu_put_be32s(f, &s->dma_left);
+ // There should be no transfers in progress, so dma_counter is not saved
}
static int esp_load(QEMUFile *f, void *opaque, int version_id)
{
ESPState *s = opaque;
- unsigned int i;
-
- if (version_id != 1)
- return -EINVAL;
-
- qemu_get_buffer(f, s->rregs, ESP_MAXREG);
- qemu_get_buffer(f, s->wregs, ESP_MAXREG);
- qemu_get_be32s(f, &s->irq);
- for (i = 0; i < ESPDMA_REGS; i++)
- qemu_get_be32s(f, &s->espdmaregs[i]);
- qemu_get_be32s(f, &s->ti_size);
+
+ if (version_id != 3)
+ return -EINVAL; // Cannot emulate 2
+
+ qemu_get_buffer(f, s->rregs, ESP_REGS);
+ qemu_get_buffer(f, s->wregs, ESP_REGS);
+ qemu_get_sbe32s(f, &s->ti_size);
qemu_get_be32s(f, &s->ti_rptr);
qemu_get_be32s(f, &s->ti_wptr);
qemu_get_buffer(f, s->ti_buf, TI_BUFSZ);
+ qemu_get_be32s(f, &s->sense);
qemu_get_be32s(f, &s->dma);
+ qemu_get_buffer(f, s->cmdbuf, TI_BUFSZ);
+ qemu_get_be32s(f, &s->cmdlen);
+ qemu_get_be32s(f, &s->do_cmd);
+ qemu_get_be32s(f, &s->dma_left);
return 0;
}
-void esp_init(BlockDriverState **bd, int irq, uint32_t espaddr, uint32_t espdaddr)
+static void esp_scsi_attach(DeviceState *host, BlockDriverState *bd, int id)
{
- ESPState *s;
- int esp_io_memory, espdma_io_memory;
- int i;
-
- s = qemu_mallocz(sizeof(ESPState));
- if (!s)
+ ESPState *s = FROM_SYSBUS(ESPState, sysbus_from_qdev(host));
+
+ if (id < 0) {
+ for (id = 0; id < ESP_MAX_DEVS; id++) {
+ if (id == (s->rregs[ESP_CFG1] & 0x7))
+ continue;
+ if (s->scsi_dev[id] == NULL)
+ break;
+ }
+ }
+ if (id >= ESP_MAX_DEVS) {
+ DPRINTF("Bad Device ID %d\n", id);
return;
+ }
+ if (s->scsi_dev[id]) {
+ DPRINTF("Destroying device %d\n", id);
+ s->scsi_dev[id]->destroy(s->scsi_dev[id]);
+ }
+ DPRINTF("Attaching block device %d\n", id);
+ /* Command queueing is not implemented. */
+ s->scsi_dev[id] = scsi_generic_init(bd, 0, esp_command_complete, s);
+ if (s->scsi_dev[id] == NULL)
+ s->scsi_dev[id] = scsi_disk_init(bd, 0, esp_command_complete, s);
+}
- s->bd = bd;
- s->irq = irq;
+void esp_init(target_phys_addr_t espaddr, int it_shift,
+ espdma_memory_read_write dma_memory_read,
+ espdma_memory_read_write dma_memory_write,
+ void *dma_opaque, qemu_irq irq, qemu_irq *reset)
+{
+ DeviceState *dev;
+ SysBusDevice *s;
+
+ dev = qdev_create(NULL, "esp");
+ qdev_set_prop_ptr(dev, "dma_memory_read", dma_memory_read);
+ qdev_set_prop_ptr(dev, "dma_memory_write", dma_memory_write);
+ qdev_set_prop_ptr(dev, "dma_opaque", dma_opaque);
+ qdev_set_prop_int(dev, "it_shift", it_shift);
+ qdev_init(dev);
+ s = sysbus_from_qdev(dev);
+ sysbus_connect_irq(s, 0, irq);
+ sysbus_mmio_map(s, 0, espaddr);
+}
- esp_io_memory = cpu_register_io_memory(0, esp_mem_read, esp_mem_write, s);
- cpu_register_physical_memory(espaddr, ESP_MAXREG*4, esp_io_memory);
+static void esp_init1(SysBusDevice *dev)
+{
+ ESPState *s = FROM_SYSBUS(ESPState, dev);
+ int esp_io_memory;
- espdma_io_memory = cpu_register_io_memory(0, espdma_mem_read, espdma_mem_write, s);
- cpu_register_physical_memory(espdaddr, 16, espdma_io_memory);
+ sysbus_init_irq(dev, &s->irq);
+ s->it_shift = qdev_get_prop_int(&dev->qdev, "it_shift", -1);
+ assert(s->it_shift != -1);
+ s->dma_memory_read = qdev_get_prop_ptr(&dev->qdev, "dma_memory_read");
+ s->dma_memory_write = qdev_get_prop_ptr(&dev->qdev, "dma_memory_write");
+ s->dma_opaque = qdev_get_prop_ptr(&dev->qdev, "dma_opaque");
+
+ esp_io_memory = cpu_register_io_memory(0, esp_mem_read, esp_mem_write, s);
+ sysbus_init_mmio(dev, ESP_REGS << s->it_shift, esp_io_memory);
esp_reset(s);
- register_savevm("esp", espaddr, 1, esp_save, esp_load, s);
- qemu_register_reset(esp_reset, s);
- for (i = 0; i < MAX_DISKS; i++) {
- if (bs_table[i]) {
- s->scsi_dev[i] =
- scsi_disk_init(bs_table[i], esp_command_complete, s);
- }
- }
+ register_savevm("esp", -1, 3, esp_save, esp_load, s);
+ qemu_register_reset(esp_reset, 0, s);
+
+ qdev_init_gpio_in(&dev->qdev, parent_esp_reset, 1);
+
+ scsi_bus_new(&dev->qdev, esp_scsi_attach);
+}
+
+static void esp_register_devices(void)
+{
+ sysbus_register_dev("esp", sizeof(ESPState), esp_init1);
}
+device_init(esp_register_devices)
projects / qemu / blobdiff