*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
+ * published by the Free Software Foundation; either version 2 or
+ * (at your option) version 3 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
-#include "vl.h"
+#include "hw.h"
+#include "audio/audio.h"
+#include "sysemu.h"
+#include "console.h"
+#include "omap.h"
+#include "boards.h"
+#include "arm-misc.h"
+#include "devices.h"
static uint32_t static_readb(void *opaque, target_phys_addr_t offset)
{
return *val >> ((offset & 3) << 3);
}
-static uint32_t static_readh(void *opaque, target_phys_addr_t offset) {
+static uint32_t static_readh(void *opaque, target_phys_addr_t offset)
+{
uint32_t *val = (uint32_t *) opaque;
return *val >> ((offset & 1) << 3);
}
-static uint32_t static_readw(void *opaque, target_phys_addr_t offset) {
+static uint32_t static_readw(void *opaque, target_phys_addr_t offset)
+{
uint32_t *val = (uint32_t *) opaque;
return *val >> ((offset & 0) << 3);
}
#define PALMTE_MMC2_GPIO 7
#define PALMTE_MMC3_GPIO 11
+static struct mouse_transform_info_s palmte_pointercal = {
+ .x = 320,
+ .y = 320,
+ .a = { -5909, 8, 22465308, 104, 7644, -1219972, 65536 },
+};
+
static void palmte_microwire_setup(struct omap_mpu_state_s *cpu)
{
+ struct uwire_slave_s *tsc;
+ AudioState *audio = 0;
+
+#ifdef HAS_AUDIO
+ audio = AUD_init();
+#endif
+
+ tsc = tsc2102_init(omap_gpio_in_get(cpu->gpio)[PALMTE_PINTDAV_GPIO],
+ audio);
+
+ omap_uwire_attach(cpu->microwire, tsc, 0);
+ omap_mcbsp_i2s_attach(cpu->mcbsp1, tsc210x_codec(tsc));
+
+ tsc210x_set_transform(tsc, &palmte_pointercal);
}
static struct {
!(keycode & 0x80));
}
-static void palmte_mmc_cover(void *opaque, int line, int level)
+static void palmte_onoff_gpios(void *opaque, int line, int level)
{
- struct omap_mpu_state_s *cpu = (struct omap_mpu_state_s *) opaque;
+ switch (line) {
+ case 0:
+ printf("%s: current to MMC/SD card %sabled.\n",
+ __FUNCTION__, level ? "dis" : "en");
+ break;
+ case 1:
+ printf("%s: internal speaker amplifier %s.\n",
+ __FUNCTION__, level ? "down" : "on");
+ break;
- qemu_set_irq(omap_mpuio_in_get(cpu->mpuio)[PALMTE_MMC_SWITCH_GPIO],
- !level);
+ /* These LCD & Audio output signals have not been identified yet. */
+ case 2:
+ case 3:
+ case 4:
+ printf("%s: LCD GPIO%i %s.\n",
+ __FUNCTION__, line - 1, level ? "high" : "low");
+ break;
+ case 5:
+ case 6:
+ printf("%s: Audio GPIO%i %s.\n",
+ __FUNCTION__, line - 4, level ? "high" : "low");
+ break;
+ }
}
-static void palmte_init(int ram_size, int vga_ram_size, int boot_device,
- DisplayState *ds, const char **fd_filename, int snapshot,
+static void palmte_gpio_setup(struct omap_mpu_state_s *cpu)
+{
+ qemu_irq *misc_gpio;
+
+ omap_mmc_handlers(cpu->mmc,
+ omap_gpio_in_get(cpu->gpio)[PALMTE_MMC_WP_GPIO],
+ qemu_irq_invert(omap_mpuio_in_get(cpu->mpuio)
+ [PALMTE_MMC_SWITCH_GPIO]));
+
+ misc_gpio = qemu_allocate_irqs(palmte_onoff_gpios, cpu, 7);
+ omap_gpio_out_set(cpu->gpio, PALMTE_MMC_POWER_GPIO, misc_gpio[0]);
+ omap_gpio_out_set(cpu->gpio, PALMTE_SPEAKER_GPIO, misc_gpio[1]);
+ omap_gpio_out_set(cpu->gpio, 11, misc_gpio[2]);
+ omap_gpio_out_set(cpu->gpio, 12, misc_gpio[3]);
+ omap_gpio_out_set(cpu->gpio, 13, misc_gpio[4]);
+ omap_mpuio_out_set(cpu->mpuio, 1, misc_gpio[5]);
+ omap_mpuio_out_set(cpu->mpuio, 3, misc_gpio[6]);
+
+ /* Reset some inputs to initial state. */
+ qemu_irq_lower(omap_gpio_in_get(cpu->gpio)[PALMTE_USBDETECT_GPIO]);
+ qemu_irq_lower(omap_gpio_in_get(cpu->gpio)[PALMTE_USB_OR_DC_GPIO]);
+ qemu_irq_lower(omap_gpio_in_get(cpu->gpio)[4]);
+ qemu_irq_lower(omap_gpio_in_get(cpu->gpio)[PALMTE_HEADPHONES_GPIO]);
+ qemu_irq_lower(omap_mpuio_in_get(cpu->mpuio)[PALMTE_DC_GPIO]);
+ qemu_irq_raise(omap_mpuio_in_get(cpu->mpuio)[6]);
+ qemu_irq_raise(omap_mpuio_in_get(cpu->mpuio)[7]);
+ qemu_irq_raise(omap_mpuio_in_get(cpu->mpuio)[11]);
+}
+
+static struct arm_boot_info palmte_binfo = {
+ .loader_start = OMAP_EMIFF_BASE,
+ .ram_size = 0x02000000,
+ .board_id = 0x331,
+};
+
+static void palmte_init(ram_addr_t ram_size, int vga_ram_size,
+ const char *boot_device, DisplayState *ds,
const char *kernel_filename, const char *kernel_cmdline,
const char *initrd_filename, const char *cpu_model)
{
struct omap_mpu_state_s *cpu;
int flash_size = 0x00800000;
- int sdram_size = 0x02000000;
+ int sdram_size = palmte_binfo.ram_size;
int io;
static uint32_t cs0val = 0xffffffff;
static uint32_t cs1val = 0x0000e1a0;
qemu_add_kbd_event_handler(palmte_button_event, cpu);
- omap_mmc_handlers(cpu->mmc,
- omap_gpio_in_get(cpu->gpio)[PALMTE_MMC_WP_GPIO],
- qemu_allocate_irqs(palmte_mmc_cover, cpu, 1)[0]);
+ palmte_gpio_setup(cpu);
/* Setup initial (reset) machine state */
if (nb_option_roms) {
/* Load the kernel. */
if (kernel_filename) {
/* Start at bootloader. */
- cpu->env->regs[15] = OMAP_EMIFF_BASE;
+ cpu->env->regs[15] = palmte_binfo.loader_start;
- arm_load_kernel(cpu->env, sdram_size, kernel_filename, kernel_cmdline,
- initrd_filename, 0x331, OMAP_EMIFF_BASE);
+ palmte_binfo.kernel_filename = kernel_filename;
+ palmte_binfo.kernel_cmdline = kernel_cmdline;
+ palmte_binfo.initrd_filename = initrd_filename;
+ arm_load_kernel(cpu->env, &palmte_binfo);
}
- dpy_resize(ds, 320, 320);
+ /* FIXME: We shouldn't really be doing this here. The LCD controller
+ will set the size once configured, so this just sets an initial
+ size until the guest activates the display. */
+ ds->surface = qemu_resize_displaysurface(ds->surface, 320, 320, 32, 4 * 320);
+ dpy_resize(ds);
}
QEMUMachine palmte_machine = {
- "cheetah",
- "Palm Tungsten|E aka. Cheetah PDA (OMAP310)",
- palmte_init,
+ .name = "cheetah",
+ .desc = "Palm Tungsten|E aka. Cheetah PDA (OMAP310)",
+ .init = palmte_init,
+ .ram_require = (0x02000000 + 0x00800000 + OMAP15XX_SRAM_SIZE) |
+ RAMSIZE_FIXED,
};
projects / qemu / blobdiff