* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
-#include "vl.h"
+#include "hw.h"
+#include "sun4m.h"
+#include "qemu-timer.h"
//#define DEBUG_TIMER
#ifdef DEBUG_TIMER
-#define DPRINTF(fmt, args...) \
-do { printf("TIMER: " fmt , ##args); } while (0)
+#define DPRINTF(fmt, ...) \
+ do { printf("TIMER: " fmt , ## __VA_ARGS__); } while (0)
#else
-#define DPRINTF(fmt, args...)
+#define DPRINTF(fmt, ...) do {} while (0)
#endif
/*
ptimer_state *timer;
uint32_t count, counthigh, reached;
uint64_t limit;
- int stopped;
- int mode; // 0 = processor, 1 = user, 2 = system
+ // processor only
+ uint32_t running;
+ struct SLAVIO_TIMERState *master;
+ uint32_t slave_index;
+ // system only
+ uint32_t num_slaves;
struct SLAVIO_TIMERState *slave[MAX_CPUS];
uint32_t slave_mode;
} SLAVIO_TIMERState;
-#define TIMER_MAXADDR 0x1f
-#define TIMER_SIZE (TIMER_MAXADDR + 1)
+#define SYS_TIMER_SIZE 0x14
#define CPU_TIMER_SIZE 0x10
+#define SYS_TIMER_OFFSET 0x10000ULL
+#define CPU_TIMER_OFFSET(cpu) (0x1000ULL * cpu)
+
+#define TIMER_LIMIT 0
+#define TIMER_COUNTER 1
+#define TIMER_COUNTER_NORST 2
+#define TIMER_STATUS 3
+#define TIMER_MODE 4
+
+#define TIMER_COUNT_MASK32 0xfffffe00
+#define TIMER_LIMIT_MASK32 0x7fffffff
+#define TIMER_MAX_COUNT64 0x7ffffffffffffe00ULL
+#define TIMER_MAX_COUNT32 0x7ffffe00ULL
+#define TIMER_REACHED 0x80000000
+#define TIMER_PERIOD 500ULL // 500ns
+#define LIMIT_TO_PERIODS(l) ((l) >> 9)
+#define PERIODS_TO_LIMIT(l) ((l) << 9)
+
+static int slavio_timer_is_user(SLAVIO_TIMERState *s)
+{
+ return s->master && (s->master->slave_mode & (1 << s->slave_index));
+}
+
// Update count, set irq, update expire_time
// Convert from ptimer countdown units
static void slavio_timer_get_out(SLAVIO_TIMERState *s)
{
- uint64_t count;
+ uint64_t count, limit;
+
+ if (s->limit == 0) /* free-run processor or system counter */
+ limit = TIMER_MAX_COUNT32;
+ else
+ limit = s->limit;
+
+ if (s->timer)
+ count = limit - PERIODS_TO_LIMIT(ptimer_get_count(s->timer));
+ else
+ count = 0;
- count = s->limit - (ptimer_get_count(s->timer) << 9);
- DPRINTF("get_out: limit %" PRIx64 " count %x%08x\n", s->limit, s->counthigh,
- s->count);
- s->count = count & 0xfffffe00;
+ DPRINTF("get_out: limit %" PRIx64 " count %x%08x\n", s->limit,
+ s->counthigh, s->count);
+ s->count = count & TIMER_COUNT_MASK32;
s->counthigh = count >> 32;
}
slavio_timer_get_out(s);
DPRINTF("callback: count %x%08x\n", s->counthigh, s->count);
- s->reached = 0x80000000;
- if (s->mode != 1)
+ s->reached = TIMER_REACHED;
+ if (!slavio_timer_is_user(s))
qemu_irq_raise(s->irq);
}
SLAVIO_TIMERState *s = opaque;
uint32_t saddr, ret;
- saddr = (addr & TIMER_MAXADDR) >> 2;
+ saddr = addr >> 2;
switch (saddr) {
- case 0:
+ case TIMER_LIMIT:
// read limit (system counter mode) or read most signifying
// part of counter (user mode)
- if (s->mode != 1) {
+ if (slavio_timer_is_user(s)) {
+ // read user timer MSW
+ slavio_timer_get_out(s);
+ ret = s->counthigh | s->reached;
+ } else {
+ // read limit
// clear irq
qemu_irq_lower(s->irq);
s->reached = 0;
- ret = s->limit & 0x7fffffff;
- }
- else {
- slavio_timer_get_out(s);
- ret = s->counthigh & 0x7fffffff;
+ ret = s->limit & TIMER_LIMIT_MASK32;
}
break;
- case 1:
+ case TIMER_COUNTER:
// read counter and reached bit (system mode) or read lsbits
// of counter (user mode)
slavio_timer_get_out(s);
- if (s->mode != 1)
- ret = (s->count & 0x7fffffff) | s->reached;
- else
- ret = s->count;
+ if (slavio_timer_is_user(s)) // read user timer LSW
+ ret = s->count & TIMER_MAX_COUNT64;
+ else // read limit
+ ret = (s->count & TIMER_MAX_COUNT32) | s->reached;
break;
- case 3:
+ case TIMER_STATUS:
+ // only available in processor counter/timer
// read start/stop status
- ret = s->stopped;
+ ret = s->running;
break;
- case 4:
+ case TIMER_MODE:
+ // only available in system counter
// read user/system mode
ret = s->slave_mode;
break;
default:
+ DPRINTF("invalid read address " TARGET_FMT_plx "\n", addr);
ret = 0;
break;
}
return ret;
}
-static void slavio_timer_mem_writel(void *opaque, target_phys_addr_t addr, uint32_t val)
+static void slavio_timer_mem_writel(void *opaque, target_phys_addr_t addr,
+ uint32_t val)
{
SLAVIO_TIMERState *s = opaque;
uint32_t saddr;
- int reload = 0;
DPRINTF("write " TARGET_FMT_plx " %08x\n", addr, val);
- saddr = (addr & TIMER_MAXADDR) >> 2;
+ saddr = addr >> 2;
switch (saddr) {
- case 0:
- if (s->mode == 1) {
- // set user counter limit MSW, reset counter
+ case TIMER_LIMIT:
+ if (slavio_timer_is_user(s)) {
+ uint64_t count;
+
+ // set user counter MSW, reset counter
+ s->limit = TIMER_MAX_COUNT64;
+ s->counthigh = val & (TIMER_MAX_COUNT64 >> 32);
+ s->reached = 0;
+ count = ((uint64_t)s->counthigh << 32) | s->count;
+ DPRINTF("processor %d user timer set to %016llx\n", s->slave_index,
+ count);
+ if (s->timer)
+ ptimer_set_count(s->timer, LIMIT_TO_PERIODS(s->limit - count));
+ } else {
+ // set limit, reset counter
qemu_irq_lower(s->irq);
- s->limit &= 0xfffffe00ULL;
- s->limit |= (uint64_t)val << 32;
- if (!s->limit)
- s->limit = 0x7ffffffffffffe00ULL;
- ptimer_set_limit(s->timer, s->limit >> 9, 1);
- break;
+ s->limit = val & TIMER_MAX_COUNT32;
+ if (s->timer) {
+ if (s->limit == 0) /* free-run */
+ ptimer_set_limit(s->timer,
+ LIMIT_TO_PERIODS(TIMER_MAX_COUNT32), 1);
+ else
+ ptimer_set_limit(s->timer, LIMIT_TO_PERIODS(s->limit), 1);
+ }
}
- // set limit, reset counter
- reload = 1;
- qemu_irq_lower(s->irq);
- // fall through
- case 2:
- // set limit without resetting counter
- s->limit = val & 0x7ffffe00ULL;
- if (!s->limit)
- s->limit = 0x7ffffe00ULL;
- ptimer_set_limit(s->timer, s->limit >> 9, reload);
break;
- case 1:
- // set user counter limit LSW, reset counter
- if (s->mode == 1) {
- qemu_irq_lower(s->irq);
- s->limit &= 0x7fffffff00000000ULL;
- s->limit |= val & 0xfffffe00ULL;
- if (!s->limit)
- s->limit = 0x7ffffffffffffe00ULL;
- ptimer_set_limit(s->timer, s->limit >> 9, 1);
+ case TIMER_COUNTER:
+ if (slavio_timer_is_user(s)) {
+ uint64_t count;
+
+ // set user counter LSW, reset counter
+ s->limit = TIMER_MAX_COUNT64;
+ s->count = val & TIMER_MAX_COUNT64;
+ s->reached = 0;
+ count = ((uint64_t)s->counthigh) << 32 | s->count;
+ DPRINTF("processor %d user timer set to %016llx\n", s->slave_index,
+ count);
+ if (s->timer)
+ ptimer_set_count(s->timer, LIMIT_TO_PERIODS(s->limit - count));
+ } else
+ DPRINTF("not user timer\n");
+ break;
+ case TIMER_COUNTER_NORST:
+ // set limit without resetting counter
+ s->limit = val & TIMER_MAX_COUNT32;
+ if (s->timer) {
+ if (s->limit == 0) /* free-run */
+ ptimer_set_limit(s->timer,
+ LIMIT_TO_PERIODS(TIMER_MAX_COUNT32), 0);
+ else
+ ptimer_set_limit(s->timer, LIMIT_TO_PERIODS(s->limit), 0);
}
break;
- case 3:
- // start/stop user counter
- if (s->mode == 1) {
- if (val & 1) {
- ptimer_stop(s->timer);
- s->stopped = 1;
- }
- else {
- ptimer_run(s->timer, 0);
- s->stopped = 0;
+ case TIMER_STATUS:
+ if (slavio_timer_is_user(s)) {
+ // start/stop user counter
+ if ((val & 1) && !s->running) {
+ DPRINTF("processor %d user timer started\n", s->slave_index);
+ if (s->timer)
+ ptimer_run(s->timer, 0);
+ s->running = 1;
+ } else if (!(val & 1) && s->running) {
+ DPRINTF("processor %d user timer stopped\n", s->slave_index);
+ if (s->timer)
+ ptimer_stop(s->timer);
+ s->running = 0;
}
}
break;
- case 4:
- // bit 0: user (1) or system (0) counter mode
- {
+ case TIMER_MODE:
+ if (s->master == NULL) {
unsigned int i;
- for (i = 0; i < MAX_CPUS; i++) {
- if (val & (1 << i)) {
- qemu_irq_lower(s->slave[i]->irq);
- s->slave[i]->limit = -1ULL;
- s->slave[i]->mode = 1;
- } else {
- s->slave[i]->mode = 0;
+ for (i = 0; i < s->num_slaves; i++) {
+ unsigned int processor = 1 << i;
+
+ // check for a change in timer mode for this processor
+ if ((val & processor) != (s->slave_mode & processor)) {
+ if (val & processor) { // counter -> user timer
+ qemu_irq_lower(s->slave[i]->irq);
+ // counters are always running
+ ptimer_stop(s->slave[i]->timer);
+ s->slave[i]->running = 0;
+ // user timer limit is always the same
+ s->slave[i]->limit = TIMER_MAX_COUNT64;
+ ptimer_set_limit(s->slave[i]->timer,
+ LIMIT_TO_PERIODS(s->slave[i]->limit),
+ 1);
+ // set this processors user timer bit in config
+ // register
+ s->slave_mode |= processor;
+ DPRINTF("processor %d changed from counter to user "
+ "timer\n", s->slave[i]->slave_index);
+ } else { // user timer -> counter
+ // stop the user timer if it is running
+ if (s->slave[i]->running)
+ ptimer_stop(s->slave[i]->timer);
+ // start the counter
+ ptimer_run(s->slave[i]->timer, 0);
+ s->slave[i]->running = 1;
+ // clear this processors user timer bit in config
+ // register
+ s->slave_mode &= ~processor;
+ DPRINTF("processor %d changed from user timer to "
+ "counter\n", s->slave[i]->slave_index);
+ }
}
- ptimer_stop(s->slave[i]->timer);
- ptimer_set_limit(s->slave[i]->timer, s->slave[i]->limit >> 9,
- 1);
- ptimer_run(s->slave[i]->timer, 0);
}
- s->slave_mode = val & ((1 << MAX_CPUS) - 1);
- }
+ } else
+ DPRINTF("not system timer\n");
break;
default:
+ DPRINTF("invalid write address " TARGET_FMT_plx "\n", addr);
break;
}
}
static CPUReadMemoryFunc *slavio_timer_mem_read[3] = {
- slavio_timer_mem_readl,
- slavio_timer_mem_readl,
+ NULL,
+ NULL,
slavio_timer_mem_readl,
};
static CPUWriteMemoryFunc *slavio_timer_mem_write[3] = {
- slavio_timer_mem_writel,
- slavio_timer_mem_writel,
+ NULL,
+ NULL,
slavio_timer_mem_writel,
};
qemu_put_be64s(f, &s->limit);
qemu_put_be32s(f, &s->count);
qemu_put_be32s(f, &s->counthigh);
- qemu_put_be32(f, 0); // Was irq
qemu_put_be32s(f, &s->reached);
- qemu_put_be32s(f, &s->stopped);
- qemu_put_be32s(f, &s->mode);
- qemu_put_ptimer(f, s->timer);
+ qemu_put_be32s(f, &s->running);
+ if (s->timer)
+ qemu_put_ptimer(f, s->timer);
}
static int slavio_timer_load(QEMUFile *f, void *opaque, int version_id)
{
SLAVIO_TIMERState *s = opaque;
- uint32_t tmp;
- if (version_id != 2)
+ if (version_id != 3)
return -EINVAL;
qemu_get_be64s(f, &s->limit);
qemu_get_be32s(f, &s->count);
qemu_get_be32s(f, &s->counthigh);
- qemu_get_be32s(f, &tmp); // Was irq
qemu_get_be32s(f, &s->reached);
- qemu_get_be32s(f, &s->stopped);
- qemu_get_be32s(f, &s->mode);
- qemu_get_ptimer(f, s->timer);
+ qemu_get_be32s(f, &s->running);
+ if (s->timer)
+ qemu_get_ptimer(f, s->timer);
return 0;
}
{
SLAVIO_TIMERState *s = opaque;
- s->limit = 0x7ffffe00ULL;
+ s->limit = 0;
s->count = 0;
s->reached = 0;
- s->mode &= 2;
- ptimer_set_limit(s->timer, s->limit >> 9, 1);
- ptimer_run(s->timer, 0);
- s->stopped = 1;
+ s->slave_mode = 0;
+ if (!s->master || s->slave_index < s->master->num_slaves) {
+ ptimer_set_limit(s->timer, LIMIT_TO_PERIODS(TIMER_MAX_COUNT32), 1);
+ ptimer_run(s->timer, 0);
+ }
+ s->running = 1;
qemu_irq_lower(s->irq);
}
static SLAVIO_TIMERState *slavio_timer_init(target_phys_addr_t addr,
- qemu_irq irq, int mode)
+ qemu_irq irq,
+ SLAVIO_TIMERState *master,
+ uint32_t slave_index)
{
int slavio_timer_io_memory;
SLAVIO_TIMERState *s;
QEMUBH *bh;
s = qemu_mallocz(sizeof(SLAVIO_TIMERState));
- if (!s)
- return s;
s->irq = irq;
- s->mode = mode;
- bh = qemu_bh_new(slavio_timer_irq, s);
- s->timer = ptimer_init(bh);
- ptimer_set_period(s->timer, 500ULL);
+ s->master = master;
+ s->slave_index = slave_index;
+ if (!master || slave_index < master->num_slaves) {
+ bh = qemu_bh_new(slavio_timer_irq, s);
+ s->timer = ptimer_init(bh);
+ ptimer_set_period(s->timer, TIMER_PERIOD);
+ }
slavio_timer_io_memory = cpu_register_io_memory(0, slavio_timer_mem_read,
slavio_timer_mem_write, s);
- if (mode < 2)
- cpu_register_physical_memory(addr, CPU_TIMER_SIZE, slavio_timer_io_memory);
+ if (master)
+ cpu_register_physical_memory(addr, CPU_TIMER_SIZE,
+ slavio_timer_io_memory);
else
- cpu_register_physical_memory(addr, TIMER_SIZE,
+ cpu_register_physical_memory(addr, SYS_TIMER_SIZE,
slavio_timer_io_memory);
- register_savevm("slavio_timer", addr, 2, slavio_timer_save, slavio_timer_load, s);
- qemu_register_reset(slavio_timer_reset, s);
+ register_savevm("slavio_timer", addr, 3, slavio_timer_save,
+ slavio_timer_load, s);
+ qemu_register_reset(slavio_timer_reset, 0, s);
slavio_timer_reset(s);
return s;
}
void slavio_timer_init_all(target_phys_addr_t base, qemu_irq master_irq,
- qemu_irq *cpu_irqs)
+ qemu_irq *cpu_irqs, unsigned int num_cpus)
{
SLAVIO_TIMERState *master;
unsigned int i;
- master = slavio_timer_init(base + 0x10000ULL, master_irq, 2);
+ master = slavio_timer_init(base + SYS_TIMER_OFFSET, master_irq, NULL, 0);
+
+ master->num_slaves = num_cpus;
for (i = 0; i < MAX_CPUS; i++) {
master->slave[i] = slavio_timer_init(base + (target_phys_addr_t)
- (i * TARGET_PAGE_SIZE),
- cpu_irqs[i], 0);
+ CPU_TIMER_OFFSET(i),
+ cpu_irqs[i], master, i);
}
}
projects / qemu / blobdiff