\input texinfo @c -*- texinfo -*-
+@c %**start of header
+@setfilename qemu-doc.info
+@settitle QEMU Emulator User Documentation
+@exampleindent 0
+@paragraphindent 0
+@c %**end of header
@iftex
-@settitle QEMU CPU Emulator User Documentation
@titlepage
@sp 7
-@center @titlefont{QEMU CPU Emulator User Documentation}
+@center @titlefont{QEMU Emulator}
+@sp 1
+@center @titlefont{User Documentation}
@sp 3
@end titlepage
@end iftex
+@ifnottex
+@node Top
+@top
+
+@menu
+* Introduction::
+* Installation::
+* QEMU PC System emulator::
+* QEMU System emulator for non PC targets::
+* QEMU User space emulator::
+* compilation:: Compilation from the sources
+* Index::
+@end menu
+@end ifnottex
+
+@contents
+
+@node Introduction
@chapter Introduction
+@menu
+* intro_features:: Features
+@end menu
+
+@node intro_features
@section Features
QEMU is a FAST! processor emulator using dynamic translation to
@itemize @minus
-@item
+@item
Full system emulation. In this mode, QEMU emulates a full system (for
-example a PC), including a processor and various peripherials. It can
-be used to launch different Operating Systems without rebooting the
-PC or to debug system code.
+example a PC), including one or several processors and various
+peripherals. It can be used to launch different Operating Systems
+without rebooting the PC or to debug system code.
-@item
-User mode emulation (Linux host only). In this mode, QEMU can launch
-Linux processes compiled for one CPU on another CPU. It can be used to
+@item
+User mode emulation. In this mode, QEMU can launch
+processes compiled for one CPU on another CPU. It can be used to
launch the Wine Windows API emulator (@url{http://www.winehq.org}) or
to ease cross-compilation and cross-debugging.
@end itemize
QEMU can run without an host kernel driver and yet gives acceptable
-performance.
+performance.
For system emulation, the following hardware targets are supported:
@itemize
-@item PC (x86 processor)
+@item PC (x86 or x86_64 processor)
+@item ISA PC (old style PC without PCI bus)
@item PREP (PowerPC processor)
-@item PowerMac (PowerPC processor, in progress)
+@item G3 Beige PowerMac (PowerPC processor)
+@item Mac99 PowerMac (PowerPC processor, in progress)
+@item Sun4m/Sun4c/Sun4d (32-bit Sparc processor)
+@item Sun4u/Sun4v (64-bit Sparc processor, in progress)
+@item Malta board (32-bit and 64-bit MIPS processors)
+@item MIPS Magnum (64-bit MIPS processor)
+@item ARM Integrator/CP (ARM)
+@item ARM Versatile baseboard (ARM)
+@item ARM RealView Emulation baseboard (ARM)
+@item Spitz, Akita, Borzoi, Terrier and Tosa PDAs (PXA270 processor)
+@item Luminary Micro LM3S811EVB (ARM Cortex-M3)
+@item Luminary Micro LM3S6965EVB (ARM Cortex-M3)
+@item Freescale MCF5208EVB (ColdFire V2).
+@item Arnewsh MCF5206 evaluation board (ColdFire V2).
+@item Palm Tungsten|E PDA (OMAP310 processor)
+@item N800 and N810 tablets (OMAP2420 processor)
+@item MusicPal (MV88W8618 ARM processor)
+@item Gumstix "Connex" and "Verdex" motherboards (PXA255/270).
+@item Siemens SX1 smartphone (OMAP310 processor)
+@item Syborg SVP base model (ARM Cortex-A8).
+@item AXIS-Devboard88 (CRISv32 ETRAX-FS).
+@item Petalogix Spartan 3aDSP1800 MMU ref design (MicroBlaze).
@end itemize
-For user emulation, x86, PowerPC, ARM, and SPARC CPUs are supported.
+For user emulation, x86, PowerPC, ARM, 32-bit MIPS, Sparc32/64, ColdFire(m68k), CRISv32 and MicroBlaze CPUs are supported.
+@node Installation
@chapter Installation
If you want to compile QEMU yourself, see @ref{compilation}.
+@menu
+* install_linux:: Linux
+* install_windows:: Windows
+* install_mac:: Macintosh
+@end menu
+
+@node install_linux
@section Linux
If a precompiled package is available for your distribution - you just
have to install it. Otherwise, see @ref{compilation}.
+@node install_windows
@section Windows
Download the experimental binary installer at
-@url{http://www.freeoszoo.org/download.php}.
+@url{http://www.free.oszoo.org/@/download.html}.
+@node install_mac
@section Mac OS X
Download the experimental binary installer at
-@url{http://www.freeoszoo.org/download.php}.
-
-@chapter QEMU PC System emulator invocation
-
+@url{http://www.free.oszoo.org/@/download.html}.
+
+@node QEMU PC System emulator
+@chapter QEMU PC System emulator
+
+@menu
+* pcsys_introduction:: Introduction
+* pcsys_quickstart:: Quick Start
+* sec_invocation:: Invocation
+* pcsys_keys:: Keys
+* pcsys_monitor:: QEMU Monitor
+* disk_images:: Disk Images
+* pcsys_network:: Network emulation
+* direct_linux_boot:: Direct Linux Boot
+* pcsys_usb:: USB emulation
+* vnc_security:: VNC security
+* gdb_usage:: GDB usage
+* pcsys_os_specific:: Target OS specific information
+@end menu
+
+@node pcsys_introduction
@section Introduction
@c man begin DESCRIPTION
-The QEMU System emulator simulates the
-following PC peripherials:
+The QEMU PC System emulator simulates the
+following peripherals:
@itemize @minus
-@item
+@item
i440FX host PCI bridge and PIIX3 PCI to ISA bridge
@item
Cirrus CLGD 5446 PCI VGA card or dummy VGA card with Bochs VESA
extensions (hardware level, including all non standard modes).
@item
PS/2 mouse and keyboard
-@item
+@item
2 PCI IDE interfaces with hard disk and CD-ROM support
@item
Floppy disk
-@item
-NE2000 PCI network adapters
+@item
+PCI/ISA PCI network adapters
@item
Serial ports
@item
-Soundblaster 16 card
+Creative SoundBlaster 16 sound card
+@item
+ENSONIQ AudioPCI ES1370 sound card
+@item
+Intel 82801AA AC97 Audio compatible sound card
+@item
+Adlib(OPL2) - Yamaha YM3812 compatible chip
+@item
+Gravis Ultrasound GF1 sound card
+@item
+CS4231A compatible sound card
+@item
+PCI UHCI USB controller and a virtual USB hub.
@end itemize
+SMP is supported with up to 255 CPUs.
+
+Note that adlib, gus and cs4231a are only available when QEMU was
+configured with --audio-card-list option containing the name(s) of
+required card(s).
+
QEMU uses the PC BIOS from the Bochs project and the Plex86/Bochs LGPL
VGA BIOS.
+QEMU uses YM3812 emulation by Tatsuyuki Satoh.
+
+QEMU uses GUS emulation(GUSEMU32 @url{http://www.deinmeister.de/gusemu/})
+by Tibor "TS" Schütz.
+
+CS4231A is the chip used in Windows Sound System and GUSMAX products
+
@c man end
+@node pcsys_quickstart
@section Quick Start
Download and uncompress the linux image (@file{linux.img}) and type:
Linux should boot and give you a prompt.
+@node sec_invocation
@section Invocation
@example
@c man begin SYNOPSIS
-usage: qemu [options] [disk_image]
+usage: qemu [options] [@var{disk_image}]
@c man end
@end example
@c man begin OPTIONS
-@var{disk_image} is a raw hard disk image for IDE hard disk 0.
-
-General options:
-@table @option
-@item -fda file
-@item -fdb file
-Use @var{file} as floppy disk 0/1 image (@xref{disk_images}). You can
-use the host floppy by using @file{/dev/fd0} as filename.
-
-@item -hda file
-@item -hdb file
-@item -hdc file
-@item -hdd file
-Use @var{file} as hard disk 0, 1, 2 or 3 image (@xref{disk_images}).
-
-@item -cdrom file
-Use @var{file} as CD-ROM image (you cannot use @option{-hdc} and and
-@option{-cdrom} at the same time). You can use the host CD-ROM by
-using @file{/dev/cdrom} as filename.
-
-@item -boot [a|c|d]
-Boot on floppy (a), hard disk (c) or CD-ROM (d). Hard disk boot is
-the default.
-
-@item -snapshot
-Write to temporary files instead of disk image files. In this case,
-the raw disk image you use is not written back. You can however force
-the write back by pressing @key{C-a s} (@xref{disk_images}).
-
-@item -m megs
-Set virtual RAM size to @var{megs} megabytes. Default is 128 MB.
-
-@item -nographic
-
-Normally, QEMU uses SDL to display the VGA output. With this option,
-you can totally disable graphical output so that QEMU is a simple
-command line application. The emulated serial port is redirected on
-the console. Therefore, you can still use QEMU to debug a Linux kernel
-with a serial console.
-
-@item -k language
-
-Use keyboard layout @var{language} (for example @code{fr} for
-French). This option is only needed where it is not easy to get raw PC
-keycodes (e.g. on Macs or with some X11 servers). You don't need to
-use it on PC/Linux or PC/Windows hosts.
-
-The available layouts are:
-@example
-ar de-ch es fo fr-ca hu ja mk no pt-br sv
-da en-gb et fr fr-ch is lt nl pl ru th
-de en-us fi fr-be hr it lv nl-be pt sl tr
-@end example
-
-The default is @code{en-us}.
-
-@item -enable-audio
-
-The SB16 emulation is disabled by default as it may give problems with
-Windows. You can enable it manually with this option.
-
-@item -localtime
-Set the real time clock to local time (the default is to UTC
-time). This option is needed to have correct date in MS-DOS or
-Windows.
-
-@item -full-screen
-Start in full screen.
-
-@item -pidfile file
-Store the QEMU process PID in @var{file}. It is useful if you launch QEMU
-from a script.
-
-@end table
-
-Network options:
-
-@table @option
-
-@item -n script
-Set TUN/TAP network init script [default=/etc/qemu-ifup]. This script
-is launched to configure the host network interface (usually tun0)
-corresponding to the virtual NE2000 card.
-
-@item -macaddr addr
-
-Set the mac address of the first interface (the format is
-aa:bb:cc:dd:ee:ff in hexa). The mac address is incremented for each
-new network interface.
-
-@item -tun-fd fd
-Assumes @var{fd} talks to a tap/tun host network interface and use
-it. Read @url{http://bellard.org/qemu/tetrinet.html} to have an
-example of its use.
-
-@item -user-net
-Use the user mode network stack. This is the default if no tun/tap
-network init script is found.
-
-@item -tftp prefix
-When using the user mode network stack, activate a built-in TFTP
-server. All filenames beginning with @var{prefix} can be downloaded
-from the host to the guest using a TFTP client. The TFTP client on the
-guest must be configured in binary mode (use the command @code{bin} of
-the Unix TFTP client). The host IP address on the guest is as usual
-10.0.2.2.
-
-@item -smb dir
-When using the user mode network stack, activate a built-in SMB
-server so that Windows OSes can access to the host files in @file{dir}
-transparently.
-
-In the guest Windows OS, the line:
-@example
-10.0.2.4 smbserver
-@end example
-must be added in the file @file{C:\WINDOWS\LMHOSTS} (for windows 9x/Me)
-or @file{C:\WINNT\SYSTEM32\DRIVERS\ETC\LMHOSTS} (Windows NT/2000).
-
-Then @file{dir} can be accessed in @file{\\smbserver\qemu}.
-
-Note that a SAMBA server must be installed on the host OS in
-@file{/usr/sbin/smbd}. QEMU was tested succesfully with smbd version
-2.2.7a from the Red Hat 9.
-
-@item -redir [tcp|udp]:host-port:[guest-host]:guest-port
-
-When using the user mode network stack, redirect incoming TCP or UDP
-connections to the host port @var{host-port} to the guest
-@var{guest-host} on guest port @var{guest-port}. If @var{guest-host}
-is not specified, its value is 10.0.2.15 (default address given by the
-built-in DHCP server).
-
-For example, to redirect host X11 connection from screen 1 to guest
-screen 0, use the following:
-
-@example
-# on the host
-qemu -redir tcp:6001::6000 [...]
-# this host xterm should open in the guest X11 server
-xterm -display :1
-@end example
-
-To redirect telnet connections from host port 5555 to telnet port on
-the guest, use the following:
-
-@example
-# on the host
-qemu -redir tcp:5555::23 [...]
-telnet localhost 5555
-@end example
-
-Then when you use on the host @code{telnet localhost 5555}, you
-connect to the guest telnet server.
-
-@item -dummy-net
-Use the dummy network stack: no packet will be received by the network
-cards.
-
-@end table
-
-Linux boot specific. When using this options, you can use a given
-Linux kernel without installing it in the disk image. It can be useful
-for easier testing of various kernels.
-
-@table @option
-
-@item -kernel bzImage
-Use @var{bzImage} as kernel image.
-
-@item -append cmdline
-Use @var{cmdline} as kernel command line
-
-@item -initrd file
-Use @var{file} as initial ram disk.
+@var{disk_image} is a raw hard disk image for IDE hard disk 0. Some
+targets do not need a disk image.
-@end table
-
-Debug/Expert options:
-@table @option
-
-@item -serial dev
-Redirect the virtual serial port to host device @var{dev}. Available
-devices are:
-@table @code
-@item vc
-Virtual console
-@item pty
-[Linux only] Pseudo TTY (a new PTY is automatically allocated)
-@item null
-void device
-@item stdio
-[Unix only] standard input/output
-@end table
-The default device is @code{vc} in graphical mode and @code{stdio} in
-non graphical mode.
-
-This option can be used several times to simulate up to 4 serials
-ports.
-
-@item -monitor dev
-Redirect the monitor to host device @var{dev} (same devices as the
-serial port).
-The default device is @code{vc} in graphical mode and @code{stdio} in
-non graphical mode.
-
-@item -s
-Wait gdb connection to port 1234 (@xref{gdb_usage}).
-@item -p port
-Change gdb connection port.
-@item -S
-Do not start CPU at startup (you must type 'c' in the monitor).
-@item -d
-Output log in /tmp/qemu.log
-@item -hdachs c,h,s,[,t]
-Force hard disk 0 physical geometry (1 <= @var{c} <= 16383, 1 <=
-@var{h} <= 16, 1 <= @var{s} <= 63) and optionally force the BIOS
-translation mode (@var{t}=none, lba or auto). Usually QEMU can guess
-all thoses parameters. This option is useful for old MS-DOS disk
-images.
-
-@item -isa
-Simulate an ISA-only system (default is PCI system).
-@item -std-vga
-Simulate a standard VGA card with Bochs VBE extensions (default is
-Cirrus Logic GD5446 PCI VGA)
-@item -loadvm file
-Start right away with a saved state (@code{loadvm} in monitor)
-@end table
+@include qemu-options.texi
@c man end
+@node pcsys_keys
@section Keys
@c man begin OPTIONS
@table @key
@item Ctrl-a h
+@item Ctrl-a ?
Print this help
-@item Ctrl-a x
-Exit emulatior
-@item Ctrl-a s
+@item Ctrl-a x
+Exit emulator
+@item Ctrl-a s
Save disk data back to file (if -snapshot)
+@item Ctrl-a t
+Toggle console timestamps
@item Ctrl-a b
Send break (magic sysrq in Linux)
@item Ctrl-a c
@ignore
-@setfilename qemu
-@settitle QEMU System Emulator
-
@c man begin SEEALSO
The HTML documentation of QEMU for more precise information and Linux
user mode emulator invocation.
@end ignore
-@end ignore
-
+@node pcsys_monitor
@section QEMU Monitor
The QEMU monitor is used to give complex commands to the QEMU
@itemize @minus
@item
-Remove or insert removable medias images
-(such as CD-ROM or floppies)
+Remove or insert removable media images
+(such as CD-ROM or floppies).
-@item
+@item
Freeze/unfreeze the Virtual Machine (VM) and save or restore its state
from a disk file.
@table @option
-@item help or ? [cmd]
+@item help or ? [@var{cmd}]
Show the help for all commands or just for command @var{cmd}.
-@item commit
-Commit changes to the disk images (if -snapshot is used)
+@item commit
+Commit changes to the disk images (if -snapshot is used).
-@item info subcommand
-show various information about the system state
+@item info @var{subcommand}
+Show various information about the system state.
@table @option
+@item info version
+show the version of QEMU
@item info network
-show the network state
+show the various VLANs and the associated devices
+@item info chardev
+show the character devices
@item info block
show the block devices
+@item info block
+show block device statistics
@item info registers
show the cpu registers
+@item info cpus
+show infos for each CPU
@item info history
show the command line history
+@item info irq
+show the interrupts statistics (if available)
+@item info pic
+show i8259 (PIC) state
+@item info pci
+show emulated PCI device info
+@item info tlb
+show virtual to physical memory mappings (i386 only)
+@item info mem
+show the active virtual memory mappings (i386 only)
+@item info hpet
+show state of HPET (i386 only)
+@item info kqemu
+show KQEMU information
+@item info kvm
+show KVM information
+@item info usb
+show USB devices plugged on the virtual USB hub
+@item info usbhost
+show all USB host devices
+@item info profile
+show profiling information
+@item info capture
+show information about active capturing
+@item info snapshots
+show list of VM snapshots
+@item info status
+show the current VM status (running|paused)
+@item info pcmcia
+show guest PCMCIA status
+@item info mice
+show which guest mouse is receiving events
+@item info vnc
+show the vnc server status
+@item info name
+show the current VM name
+@item info uuid
+show the current VM UUID
+@item info cpustats
+show CPU statistics
+@item info slirp
+show SLIRP statistics (if available)
+@item info migrate
+show migration status
+@item info balloon
+show balloon information
@end table
@item q or quit
Quit the emulator.
-@item eject [-f] device
-Eject a removable media (use -f to force it).
+@item eject [-f] @var{device}
+Eject a removable medium (use -f to force it).
+
+@item change @var{device} @var{setting}
+
+Change the configuration of a device.
+
+@table @option
+@item change @var{diskdevice} @var{filename} [@var{format}]
+Change the medium for a removable disk device to point to @var{filename}. eg
+
+@example
+(qemu) change ide1-cd0 /path/to/some.iso
+@end example
+
+@var{format} is optional.
+
+@item change vnc @var{display},@var{options}
+Change the configuration of the VNC server. The valid syntax for @var{display}
+and @var{options} are described at @ref{sec_invocation}. eg
+
+@example
+(qemu) change vnc localhost:1
+@end example
+
+@item change vnc password [@var{password}]
+
+Change the password associated with the VNC server. If the new password is not
+supplied, the monitor will prompt for it to be entered. VNC passwords are only
+significant up to 8 letters. eg
+
+@example
+(qemu) change vnc password
+Password: ********
+@end example
+
+@end table
+
+@item acl @var{subcommand} @var{aclname} @var{match} @var{index}
-@item change device filename
-Change a removable media.
+Manage access control lists for network services. There are currently
+two named access control lists, @var{vnc.x509dname} and @var{vnc.username}
+matching on the x509 client certificate distinguished name, and SASL
+username respectively.
-@item screendump filename
+@table @option
+@item acl show <aclname>
+list all the match rules in the access control list, and the default
+policy
+@item acl policy <aclname> @code{allow|deny}
+set the default access control list policy, used in the event that
+none of the explicit rules match. The default policy at startup is
+always @code{deny}
+@item acl allow <aclname> <match> [<index>]
+add a match to the access control list, allowing access. The match will
+normally be an exact username or x509 distinguished name, but can
+optionally include wildcard globs. eg @code{*@@EXAMPLE.COM} to allow
+all users in the @code{EXAMPLE.COM} kerberos realm. The match will
+normally be appended to the end of the ACL, but can be inserted
+earlier in the list if the optional @code{index} parameter is supplied.
+@item acl deny <aclname> <match> [<index>]
+add a match to the access control list, denying access. The match will
+normally be an exact username or x509 distinguished name, but can
+optionally include wildcard globs. eg @code{*@@EXAMPLE.COM} to allow
+all users in the @code{EXAMPLE.COM} kerberos realm. The match will
+normally be appended to the end of the ACL, but can be inserted
+earlier in the list if the optional @code{index} parameter is supplied.
+@item acl remove <aclname> <match>
+remove the specified match rule from the access control list.
+@item acl reset <aclname>
+remove all matches from the access control list, and set the default
+policy back to @code{deny}.
+@end table
+
+@item screendump @var{filename}
Save screen into PPM image @var{filename}.
-@item log item1[,...]
+@item logfile @var{filename}
+Output logs to @var{filename}.
+
+@item log @var{item1}[,...]
Activate logging of the specified items to @file{/tmp/qemu.log}.
-@item savevm filename
-Save the whole virtual machine state to @var{filename}.
+@item savevm [@var{tag}|@var{id}]
+Create a snapshot of the whole virtual machine. If @var{tag} is
+provided, it is used as human readable identifier. If there is already
+a snapshot with the same tag or ID, it is replaced. More info at
+@ref{vm_snapshots}.
-@item loadvm filename
-Restore the whole virtual machine state from @var{filename}.
+@item loadvm @var{tag}|@var{id}
+Set the whole virtual machine to the snapshot identified by the tag
+@var{tag} or the unique snapshot ID @var{id}.
+
+@item delvm @var{tag}|@var{id}
+Delete the snapshot identified by @var{tag} or @var{id}.
+
+@item singlestep [off]
+Run the emulation in single step mode.
+If called with option off, the emulation returns to normal mode.
@item stop
Stop emulation.
@item c or cont
Resume emulation.
-@item gdbserver [port]
-Start gdbserver session (default port=1234)
+@item gdbserver [@var{port}]
+Start gdbserver session (default @var{port}=1234)
-@item x/fmt addr
+@item x/fmt @var{addr}
Virtual memory dump starting at @var{addr}.
-@item xp /fmt addr
+@item xp /@var{fmt} @var{addr}
Physical memory dump starting at @var{addr}.
@var{fmt} is a format which tells the command how to format the
data. Its syntax is: @option{/@{count@}@{format@}@{size@}}
@table @var
-@item count
+@item count
is the number of items to be dumped.
@item format
-can be x (hexa), d (signed decimal), u (unsigned decimal), o (octal),
+can be x (hex), d (signed decimal), u (unsigned decimal), o (octal),
c (char) or i (asm instruction).
@item size
@end table
-Examples:
+Examples:
@itemize
@item
Dump 10 instructions at the current instruction pointer:
-@example
+@example
(qemu) x/10i $eip
0x90107063: ret
0x90107064: sti
@item
Dump 80 16 bit values at the start of the video memory.
-@example
+@smallexample
(qemu) xp/80hx 0xb8000
0x000b8000: 0x0b50 0x0b6c 0x0b65 0x0b78 0x0b38 0x0b36 0x0b2f 0x0b42
0x000b8010: 0x0b6f 0x0b63 0x0b68 0x0b73 0x0b20 0x0b56 0x0b47 0x0b41
0x000b8070: 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720
0x000b8080: 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720
0x000b8090: 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720
-@end example
+@end smallexample
@end itemize
-@item p or print/fmt expr
+@item p or print/@var{fmt} @var{expr}
Print expression value. Only the @var{format} part of @var{fmt} is
used.
-@item sendkey keys
+@item sendkey @var{keys}
-Send @var{keys} to the emulator. Use @code{-} to press several keys
-simultaneously. Example:
+Send @var{keys} to the emulator. @var{keys} could be the name of the
+key or @code{#} followed by the raw value in either decimal or hexadecimal
+format. Use @code{-} to press several keys simultaneously. Example:
@example
sendkey ctrl-alt-f1
@end example
Reset the system.
+@item system_powerdown
+
+Power down the system (if supported).
+
+@item sum @var{addr} @var{size}
+
+Compute the checksum of a memory region.
+
+@item usb_add @var{devname}
+
+Add the USB device @var{devname}. For details of available devices see
+@ref{usb_devices}
+
+@item usb_del @var{devname}
+
+Remove the USB device @var{devname} from the QEMU virtual USB
+hub. @var{devname} has the syntax @code{bus.addr}. Use the monitor
+command @code{info usb} to see the devices you can remove.
+
+@item mouse_move @var{dx} @var{dy} [@var{dz}]
+Move the active mouse to the specified coordinates @var{dx} @var{dy}
+with optional scroll axis @var{dz}.
+
+@item mouse_button @var{val}
+Change the active mouse button state @var{val} (1=L, 2=M, 4=R).
+
+@item mouse_set @var{index}
+Set which mouse device receives events at given @var{index}, index
+can be obtained with
+@example
+info mice
+@end example
+
+@item wavcapture @var{filename} [@var{frequency} [@var{bits} [@var{channels}]]]
+Capture audio into @var{filename}. Using sample rate @var{frequency}
+bits per sample @var{bits} and number of channels @var{channels}.
+
+Defaults:
+@itemize @minus
+@item Sample rate = 44100 Hz - CD quality
+@item Bits = 16
+@item Number of channels = 2 - Stereo
+@end itemize
+
+@item stopcapture @var{index}
+Stop capture with a given @var{index}, index can be obtained with
+@example
+info capture
+@end example
+
+@item memsave @var{addr} @var{size} @var{file}
+save to disk virtual memory dump starting at @var{addr} of size @var{size}.
+
+@item pmemsave @var{addr} @var{size} @var{file}
+save to disk physical memory dump starting at @var{addr} of size @var{size}.
+
+@item boot_set @var{bootdevicelist}
+
+Define new values for the boot device list. Those values will override
+the values specified on the command line through the @code{-boot} option.
+
+The values that can be specified here depend on the machine type, but are
+the same that can be specified in the @code{-boot} command line option.
+
+@item nmi @var{cpu}
+Inject an NMI on the given CPU.
+
+@item migrate [-d] @var{uri}
+Migrate to @var{uri} (using -d to not wait for completion).
+
+@item migrate_cancel
+Cancel the current VM migration.
+
+@item migrate_set_speed @var{value}
+Set maximum speed to @var{value} (in bytes) for migrations.
+
+@item balloon @var{value}
+Request VM to change its memory allocation to @var{value} (in MB).
+
+@item set_link @var{name} [up|down]
+Set link @var{name} up or down.
+
@end table
@subsection Integer expressions
Since version 0.6.1, QEMU supports many disk image formats, including
growable disk images (their size increase as non empty sectors are
-written), compressed and encrypted disk images.
-
+written), compressed and encrypted disk images. Version 0.8.3 added
+the new qcow2 disk image format which is essential to support VM
+snapshots.
+
+@menu
+* disk_images_quickstart:: Quick start for disk image creation
+* disk_images_snapshot_mode:: Snapshot mode
+* vm_snapshots:: VM snapshots
+* qemu_img_invocation:: qemu-img Invocation
+* qemu_nbd_invocation:: qemu-nbd Invocation
+* host_drives:: Using host drives
+* disk_images_fat_images:: Virtual FAT disk images
+* disk_images_nbd:: NBD access
+@end menu
+
+@node disk_images_quickstart
@subsection Quick start for disk image creation
You can create a disk image with the command:
size in kilobytes. You can add an @code{M} suffix to give the size in
megabytes and a @code{G} suffix for gigabytes.
-@xref{qemu_img_invocation} for more information.
+See @ref{qemu_img_invocation} for more information.
+@node disk_images_snapshot_mode
@subsection Snapshot mode
If you use the option @option{-snapshot}, all disk images are
write back to the raw disk images by using the @code{commit} monitor
command (or @key{C-a s} in the serial console).
+@node vm_snapshots
+@subsection VM snapshots
+
+VM snapshots are snapshots of the complete virtual machine including
+CPU state, RAM, device state and the content of all the writable
+disks. In order to use VM snapshots, you must have at least one non
+removable and writable block device using the @code{qcow2} disk image
+format. Normally this device is the first virtual hard drive.
+
+Use the monitor command @code{savevm} to create a new VM snapshot or
+replace an existing one. A human readable name can be assigned to each
+snapshot in addition to its numerical ID.
+
+Use @code{loadvm} to restore a VM snapshot and @code{delvm} to remove
+a VM snapshot. @code{info snapshots} lists the available snapshots
+with their associated information:
+
+@example
+(qemu) info snapshots
+Snapshot devices: hda
+Snapshot list (from hda):
+ID TAG VM SIZE DATE VM CLOCK
+1 start 41M 2006-08-06 12:38:02 00:00:14.954
+2 40M 2006-08-06 12:43:29 00:00:18.633
+3 msys 40M 2006-08-06 12:44:04 00:00:23.514
+@end example
+
+A VM snapshot is made of a VM state info (its size is shown in
+@code{info snapshots}) and a snapshot of every writable disk image.
+The VM state info is stored in the first @code{qcow2} non removable
+and writable block device. The disk image snapshots are stored in
+every disk image. The size of a snapshot in a disk image is difficult
+to evaluate and is not shown by @code{info snapshots} because the
+associated disk sectors are shared among all the snapshots to save
+disk space (otherwise each snapshot would need a full copy of all the
+disk images).
+
+When using the (unrelated) @code{-snapshot} option
+(@ref{disk_images_snapshot_mode}), you can always make VM snapshots,
+but they are deleted as soon as you exit QEMU.
+
+VM snapshots currently have the following known limitations:
+@itemize
+@item
+They cannot cope with removable devices if they are removed or
+inserted after a snapshot is done.
+@item
+A few device drivers still have incomplete snapshot support so their
+state is not saved or restored properly (in particular USB).
+@end itemize
+
@node qemu_img_invocation
@subsection @code{qemu-img} Invocation
@include qemu-img.texi
+@node qemu_nbd_invocation
+@subsection @code{qemu-nbd} Invocation
+
+@include qemu-nbd.texi
+
+@node host_drives
+@subsection Using host drives
+
+In addition to disk image files, QEMU can directly access host
+devices. We describe here the usage for QEMU version >= 0.8.3.
+
+@subsubsection Linux
+
+On Linux, you can directly use the host device filename instead of a
+disk image filename provided you have enough privileges to access
+it. For example, use @file{/dev/cdrom} to access to the CDROM or
+@file{/dev/fd0} for the floppy.
+
+@table @code
+@item CD
+You can specify a CDROM device even if no CDROM is loaded. QEMU has
+specific code to detect CDROM insertion or removal. CDROM ejection by
+the guest OS is supported. Currently only data CDs are supported.
+@item Floppy
+You can specify a floppy device even if no floppy is loaded. Floppy
+removal is currently not detected accurately (if you change floppy
+without doing floppy access while the floppy is not loaded, the guest
+OS will think that the same floppy is loaded).
+@item Hard disks
+Hard disks can be used. Normally you must specify the whole disk
+(@file{/dev/hdb} instead of @file{/dev/hdb1}) so that the guest OS can
+see it as a partitioned disk. WARNING: unless you know what you do, it
+is better to only make READ-ONLY accesses to the hard disk otherwise
+you may corrupt your host data (use the @option{-snapshot} command
+line option or modify the device permissions accordingly).
+@end table
+
+@subsubsection Windows
+
+@table @code
+@item CD
+The preferred syntax is the drive letter (e.g. @file{d:}). The
+alternate syntax @file{\\.\d:} is supported. @file{/dev/cdrom} is
+supported as an alias to the first CDROM drive.
+
+Currently there is no specific code to handle removable media, so it
+is better to use the @code{change} or @code{eject} monitor commands to
+change or eject media.
+@item Hard disks
+Hard disks can be used with the syntax: @file{\\.\PhysicalDrive@var{N}}
+where @var{N} is the drive number (0 is the first hard disk).
+
+WARNING: unless you know what you do, it is better to only make
+READ-ONLY accesses to the hard disk otherwise you may corrupt your
+host data (use the @option{-snapshot} command line so that the
+modifications are written in a temporary file).
+@end table
+
+
+@subsubsection Mac OS X
+
+@file{/dev/cdrom} is an alias to the first CDROM.
+
+Currently there is no specific code to handle removable media, so it
+is better to use the @code{change} or @code{eject} monitor commands to
+change or eject media.
+
+@node disk_images_fat_images
+@subsection Virtual FAT disk images
+
+QEMU can automatically create a virtual FAT disk image from a
+directory tree. In order to use it, just type:
+
+@example
+qemu linux.img -hdb fat:/my_directory
+@end example
+
+Then you access access to all the files in the @file{/my_directory}
+directory without having to copy them in a disk image or to export
+them via SAMBA or NFS. The default access is @emph{read-only}.
+
+Floppies can be emulated with the @code{:floppy:} option:
+
+@example
+qemu linux.img -fda fat:floppy:/my_directory
+@end example
+
+A read/write support is available for testing (beta stage) with the
+@code{:rw:} option:
+
+@example
+qemu linux.img -fda fat:floppy:rw:/my_directory
+@end example
+
+What you should @emph{never} do:
+@itemize
+@item use non-ASCII filenames ;
+@item use "-snapshot" together with ":rw:" ;
+@item expect it to work when loadvm'ing ;
+@item write to the FAT directory on the host system while accessing it with the guest system.
+@end itemize
+
+@node disk_images_nbd
+@subsection NBD access
+
+QEMU can access directly to block device exported using the Network Block Device
+protocol.
+
+@example
+qemu linux.img -hdb nbd:my_nbd_server.mydomain.org:1024
+@end example
+
+If the NBD server is located on the same host, you can use an unix socket instead
+of an inet socket:
+
+@example
+qemu linux.img -hdb nbd:unix:/tmp/my_socket
+@end example
+
+In this case, the block device must be exported using qemu-nbd:
+
+@example
+qemu-nbd --socket=/tmp/my_socket my_disk.qcow2
+@end example
+
+The use of qemu-nbd allows to share a disk between several guests:
+@example
+qemu-nbd --socket=/tmp/my_socket --share=2 my_disk.qcow2
+@end example
+
+and then you can use it with two guests:
+@example
+qemu linux1.img -hdb nbd:unix:/tmp/my_socket
+qemu linux2.img -hdb nbd:unix:/tmp/my_socket
+@end example
+
+@node pcsys_network
@section Network emulation
-QEMU simulates up to 6 networks cards (NE2000 boards). Each card can
-be connected to a specific host network interface.
+QEMU can simulate several network cards (PCI or ISA cards on the PC
+target) and can connect them to an arbitrary number of Virtual Local
+Area Networks (VLANs). Host TAP devices can be connected to any QEMU
+VLAN. VLAN can be connected between separate instances of QEMU to
+simulate large networks. For simpler usage, a non privileged user mode
+network stack can replace the TAP device to have a basic network
+connection.
+
+@subsection VLANs
+
+QEMU simulates several VLANs. A VLAN can be symbolised as a virtual
+connection between several network devices. These devices can be for
+example QEMU virtual Ethernet cards or virtual Host ethernet devices
+(TAP devices).
+
+@subsection Using TAP network interfaces
-@subsection Using tun/tap network interface
+This is the standard way to connect QEMU to a real network. QEMU adds
+a virtual network device on your host (called @code{tapN}), and you
+can then configure it as if it was a real ethernet card.
-This is the standard way to emulate network. QEMU adds a virtual
-network device on your host (called @code{tun0}), and you can then
-configure it as if it was a real ethernet card.
+@subsubsection Linux host
As an example, you can download the @file{linux-test-xxx.tar.gz}
archive and copy the script @file{qemu-ifup} in @file{/etc} and
configure properly @code{sudo} so that the command @code{ifconfig}
contained in @file{qemu-ifup} can be executed as root. You must verify
-that your host kernel supports the TUN/TAP network interfaces: the
+that your host kernel supports the TAP network interfaces: the
device @file{/dev/net/tun} must be present.
-See @ref{direct_linux_boot} to have an example of network use with a
-Linux distribution.
+See @ref{sec_invocation} to have examples of command lines using the
+TAP network interfaces.
+
+@subsubsection Windows host
+
+There is a virtual ethernet driver for Windows 2000/XP systems, called
+TAP-Win32. But it is not included in standard QEMU for Windows,
+so you will need to get it separately. It is part of OpenVPN package,
+so download OpenVPN from : @url{http://openvpn.net/}.
@subsection Using the user mode network stack
-By using the option @option{-user-net} or if you have no tun/tap init
-script, QEMU uses a completely user mode network stack (you don't need
-root priviledge to use the virtual network). The virtual network
-configuration is the following:
+By using the option @option{-net user} (default configuration if no
+@option{-net} option is specified), QEMU uses a completely user mode
+network stack (you don't need root privilege to use the virtual
+network). The virtual network configuration is the following:
@example
-QEMU Virtual Machine <------> Firewall/DHCP server <-----> Internet
- (10.0.2.x) | (10.0.2.2)
+ QEMU VLAN <------> Firewall/DHCP server <-----> Internet
+ | (10.0.2.2)
|
----> DNS server (10.0.2.3)
- |
+ |
----> SMB server (10.0.2.4)
@end example
The QEMU VM behaves as if it was behind a firewall which blocks all
incoming connections. You can use a DHCP client to automatically
-configure the network in the QEMU VM.
+configure the network in the QEMU VM. The DHCP server assign addresses
+to the hosts starting from 10.0.2.15.
In order to check that the user mode network is working, you can ping
the address 10.0.2.2 and verify that you got an address in the range
10.0.2.x from the QEMU virtual DHCP server.
Note that @code{ping} is not supported reliably to the internet as it
-would require root priviledges. It means you can only ping the local
+would require root privileges. It means you can only ping the local
router (10.0.2.2).
When using the built-in TFTP server, the router is also the TFTP
redirected from the host to the guest. It allows for example to
redirect X11, telnet or SSH connections.
+@subsection Connecting VLANs between QEMU instances
+
+Using the @option{-net socket} option, it is possible to make VLANs
+that span several QEMU instances. See @ref{sec_invocation} to have a
+basic example.
+
@node direct_linux_boot
@section Direct Linux Boot
This section explains how to launch a Linux kernel inside QEMU without
having to make a full bootable image. It is very useful for fast Linux
-kernel testing. The QEMU network configuration is also explained.
-
-@enumerate
-@item
-Download the archive @file{linux-test-xxx.tar.gz} containing a Linux
-kernel and a disk image.
+kernel testing.
-@item Optional: If you want network support (for example to launch X11 examples), you
-must copy the script @file{qemu-ifup} in @file{/etc} and configure
-properly @code{sudo} so that the command @code{ifconfig} contained in
-@file{qemu-ifup} can be executed as root. You must verify that your host
-kernel supports the TUN/TAP network interfaces: the device
-@file{/dev/net/tun} must be present.
+The syntax is:
+@example
+qemu -kernel arch/i386/boot/bzImage -hda root-2.4.20.img -append "root=/dev/hda"
+@end example
-When network is enabled, there is a virtual network connection between
-the host kernel and the emulated kernel. The emulated kernel is seen
-from the host kernel at IP address 172.20.0.2 and the host kernel is
-seen from the emulated kernel at IP address 172.20.0.1.
+Use @option{-kernel} to provide the Linux kernel image and
+@option{-append} to give the kernel command line arguments. The
+@option{-initrd} option can be used to provide an INITRD image.
-@item Launch @code{qemu.sh}. You should have the following output:
+When using the direct Linux boot, a disk image for the first hard disk
+@file{hda} is required because its boot sector is used to launch the
+Linux kernel.
+If you do not need graphical output, you can disable it and redirect
+the virtual serial port and the QEMU monitor to the console with the
+@option{-nographic} option. The typical command line is:
@example
-> ./qemu.sh
-Connected to host network interface: tun0
-Linux version 2.4.21 (bellard@voyager.localdomain) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #5 Tue Nov 11 18:18:53 CET 2003
-BIOS-provided physical RAM map:
- BIOS-e801: 0000000000000000 - 000000000009f000 (usable)
- BIOS-e801: 0000000000100000 - 0000000002000000 (usable)
-32MB LOWMEM available.
-On node 0 totalpages: 8192
-zone(0): 4096 pages.
-zone(1): 4096 pages.
-zone(2): 0 pages.
-Kernel command line: root=/dev/hda sb=0x220,5,1,5 ide2=noprobe ide3=noprobe ide4=noprobe ide5=noprobe console=ttyS0
-ide_setup: ide2=noprobe
-ide_setup: ide3=noprobe
-ide_setup: ide4=noprobe
-ide_setup: ide5=noprobe
-Initializing CPU#0
-Detected 2399.621 MHz processor.
-Console: colour EGA 80x25
-Calibrating delay loop... 4744.80 BogoMIPS
-Memory: 28872k/32768k available (1210k kernel code, 3508k reserved, 266k data, 64k init, 0k highmem)
-Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
-Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
-Mount cache hash table entries: 512 (order: 0, 4096 bytes)
-Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
-Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
-CPU: Intel Pentium Pro stepping 03
-Checking 'hlt' instruction... OK.
-POSIX conformance testing by UNIFIX
-Linux NET4.0 for Linux 2.4
-Based upon Swansea University Computer Society NET3.039
-Initializing RT netlink socket
-apm: BIOS not found.
-Starting kswapd
-Journalled Block Device driver loaded
-Detected PS/2 Mouse Port.
-pty: 256 Unix98 ptys configured
-Serial driver version 5.05c (2001-07-08) with no serial options enabled
-ttyS00 at 0x03f8 (irq = 4) is a 16450
-ne.c:v1.10 9/23/94 Donald Becker (becker@scyld.com)
-Last modified Nov 1, 2000 by Paul Gortmaker
-NE*000 ethercard probe at 0x300: 52 54 00 12 34 56
-eth0: NE2000 found at 0x300, using IRQ 9.
-RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
-Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
-ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
-hda: QEMU HARDDISK, ATA DISK drive
-ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
-hda: attached ide-disk driver.
-hda: 20480 sectors (10 MB) w/256KiB Cache, CHS=20/16/63
-Partition check:
- hda:
-Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996
-NET4: Linux TCP/IP 1.0 for NET4.0
-IP Protocols: ICMP, UDP, TCP, IGMP
-IP: routing cache hash table of 512 buckets, 4Kbytes
-TCP: Hash tables configured (established 2048 bind 4096)
-NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
-EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
-VFS: Mounted root (ext2 filesystem).
-Freeing unused kernel memory: 64k freed
-
-Linux version 2.4.21 (bellard@voyager.localdomain) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #5 Tue Nov 11 18:18:53 CET 2003
-
-QEMU Linux test distribution (based on Redhat 9)
-
-Type 'exit' to halt the system
-
-sh-2.05b#
-@end example
-
-@item
-Then you can play with the kernel inside the virtual serial console. You
-can launch @code{ls} for example. Type @key{Ctrl-a h} to have an help
-about the keys you can type inside the virtual serial console. In
-particular, use @key{Ctrl-a x} to exit QEMU and use @key{Ctrl-a b} as
-the Magic SysRq key.
-
-@item
-If the network is enabled, launch the script @file{/etc/linuxrc} in the
-emulator (don't forget the leading dot):
-@example
-. /etc/linuxrc
-@end example
-
-Then enable X11 connections on your PC from the emulated Linux:
-@example
-xhost +172.20.0.2
-@end example
-
-You can now launch @file{xterm} or @file{xlogo} and verify that you have
-a real Virtual Linux system !
+qemu -kernel arch/i386/boot/bzImage -hda root-2.4.20.img \
+ -append "root=/dev/hda console=ttyS0" -nographic
+@end example
-@end enumerate
+Use @key{Ctrl-a c} to switch between the serial console and the
+monitor (@pxref{pcsys_keys}).
-NOTES:
-@enumerate
-@item
-A 2.5.74 kernel is also included in the archive. Just
-replace the bzImage in qemu.sh to try it.
+@node pcsys_usb
+@section USB emulation
+
+QEMU emulates a PCI UHCI USB controller. You can virtually plug
+virtual USB devices or real host USB devices (experimental, works only
+on Linux hosts). Qemu will automatically create and connect virtual USB hubs
+as necessary to connect multiple USB devices.
-@item
-In order to exit cleanly from qemu, you can do a @emph{shutdown} inside
-qemu. qemu will automatically exit when the Linux shutdown is done.
+@menu
+* usb_devices::
+* host_usb_devices::
+@end menu
+@node usb_devices
+@subsection Connecting USB devices
-@item
-You can boot slightly faster by disabling the probe of non present IDE
-interfaces. To do so, add the following options on the kernel command
-line:
+USB devices can be connected with the @option{-usbdevice} commandline option
+or the @code{usb_add} monitor command. Available devices are:
+
+@table @code
+@item mouse
+Virtual Mouse. This will override the PS/2 mouse emulation when activated.
+@item tablet
+Pointer device that uses absolute coordinates (like a touchscreen).
+This means qemu is able to report the mouse position without having
+to grab the mouse. Also overrides the PS/2 mouse emulation when activated.
+@item disk:@var{file}
+Mass storage device based on @var{file} (@pxref{disk_images})
+@item host:@var{bus.addr}
+Pass through the host device identified by @var{bus.addr}
+(Linux only)
+@item host:@var{vendor_id:product_id}
+Pass through the host device identified by @var{vendor_id:product_id}
+(Linux only)
+@item wacom-tablet
+Virtual Wacom PenPartner tablet. This device is similar to the @code{tablet}
+above but it can be used with the tslib library because in addition to touch
+coordinates it reports touch pressure.
+@item keyboard
+Standard USB keyboard. Will override the PS/2 keyboard (if present).
+@item serial:[vendorid=@var{vendor_id}][,product_id=@var{product_id}]:@var{dev}
+Serial converter. This emulates an FTDI FT232BM chip connected to host character
+device @var{dev}. The available character devices are the same as for the
+@code{-serial} option. The @code{vendorid} and @code{productid} options can be
+used to override the default 0403:6001. For instance,
@example
-ide1=noprobe ide2=noprobe ide3=noprobe ide4=noprobe ide5=noprobe
+usb_add serial:productid=FA00:tcp:192.168.0.2:4444
@end example
+will connect to tcp port 4444 of ip 192.168.0.2, and plug that to the virtual
+serial converter, faking a Matrix Orbital LCD Display (USB ID 0403:FA00).
+@item braille
+Braille device. This will use BrlAPI to display the braille output on a real
+or fake device.
+@item net:@var{options}
+Network adapter that supports CDC ethernet and RNDIS protocols. @var{options}
+specifies NIC options as with @code{-net nic,}@var{options} (see description).
+For instance, user-mode networking can be used with
+@example
+qemu [...OPTIONS...] -net user,vlan=0 -usbdevice net:vlan=0
+@end example
+Currently this cannot be used in machines that support PCI NICs.
+@item bt[:@var{hci-type}]
+Bluetooth dongle whose type is specified in the same format as with
+the @option{-bt hci} option, @pxref{bt-hcis,,allowed HCI types}. If
+no type is given, the HCI logic corresponds to @code{-bt hci,vlan=0}.
+This USB device implements the USB Transport Layer of HCI. Example
+usage:
+@example
+qemu [...OPTIONS...] -usbdevice bt:hci,vlan=3 -bt device:keyboard,vlan=3
+@end example
+@end table
-@item
-The example disk image is a modified version of the one made by Kevin
-Lawton for the plex86 Project (@url{www.plex86.org}).
-
-@end enumerate
+@node host_usb_devices
+@subsection Using host USB devices on a Linux host
-@node gdb_usage
-@section GDB usage
+WARNING: this is an experimental feature. QEMU will slow down when
+using it. USB devices requiring real time streaming (i.e. USB Video
+Cameras) are not supported yet.
-QEMU has a primitive support to work with gdb, so that you can do
-'Ctrl-C' while the virtual machine is running and inspect its state.
+@enumerate
+@item If you use an early Linux 2.4 kernel, verify that no Linux driver
+is actually using the USB device. A simple way to do that is simply to
+disable the corresponding kernel module by renaming it from @file{mydriver.o}
+to @file{mydriver.o.disabled}.
-In order to use gdb, launch qemu with the '-s' option. It will wait for a
-gdb connection:
+@item Verify that @file{/proc/bus/usb} is working (most Linux distributions should enable it by default). You should see something like that:
@example
-> qemu -s -kernel arch/i386/boot/bzImage -hda root-2.4.20.img -append "root=/dev/hda"
-Connected to host network interface: tun0
-Waiting gdb connection on port 1234
+ls /proc/bus/usb
+001 devices drivers
@end example
-Then launch gdb on the 'vmlinux' executable:
+@item Since only root can access to the USB devices directly, you can either launch QEMU as root or change the permissions of the USB devices you want to use. For testing, the following suffices:
@example
-> gdb vmlinux
+chown -R myuid /proc/bus/usb
+@end example
+
+@item Launch QEMU and do in the monitor:
+@example
+info usbhost
+ Device 1.2, speed 480 Mb/s
+ Class 00: USB device 1234:5678, USB DISK
+@end example
+You should see the list of the devices you can use (Never try to use
+hubs, it won't work).
+
+@item Add the device in QEMU by using:
+@example
+usb_add host:1234:5678
+@end example
+
+Normally the guest OS should report that a new USB device is
+plugged. You can use the option @option{-usbdevice} to do the same.
+
+@item Now you can try to use the host USB device in QEMU.
+
+@end enumerate
+
+When relaunching QEMU, you may have to unplug and plug again the USB
+device to make it work again (this is a bug).
+
+@node vnc_security
+@section VNC security
+
+The VNC server capability provides access to the graphical console
+of the guest VM across the network. This has a number of security
+considerations depending on the deployment scenarios.
+
+@menu
+* vnc_sec_none::
+* vnc_sec_password::
+* vnc_sec_certificate::
+* vnc_sec_certificate_verify::
+* vnc_sec_certificate_pw::
+* vnc_sec_sasl::
+* vnc_sec_certificate_sasl::
+* vnc_generate_cert::
+* vnc_setup_sasl::
+@end menu
+@node vnc_sec_none
+@subsection Without passwords
+
+The simplest VNC server setup does not include any form of authentication.
+For this setup it is recommended to restrict it to listen on a UNIX domain
+socket only. For example
+
+@example
+qemu [...OPTIONS...] -vnc unix:/home/joebloggs/.qemu-myvm-vnc
+@end example
+
+This ensures that only users on local box with read/write access to that
+path can access the VNC server. To securely access the VNC server from a
+remote machine, a combination of netcat+ssh can be used to provide a secure
+tunnel.
+
+@node vnc_sec_password
+@subsection With passwords
+
+The VNC protocol has limited support for password based authentication. Since
+the protocol limits passwords to 8 characters it should not be considered
+to provide high security. The password can be fairly easily brute-forced by
+a client making repeat connections. For this reason, a VNC server using password
+authentication should be restricted to only listen on the loopback interface
+or UNIX domain sockets. Password authentication is requested with the @code{password}
+option, and then once QEMU is running the password is set with the monitor. Until
+the monitor is used to set the password all clients will be rejected.
+
+@example
+qemu [...OPTIONS...] -vnc :1,password -monitor stdio
+(qemu) change vnc password
+Password: ********
+(qemu)
+@end example
+
+@node vnc_sec_certificate
+@subsection With x509 certificates
+
+The QEMU VNC server also implements the VeNCrypt extension allowing use of
+TLS for encryption of the session, and x509 certificates for authentication.
+The use of x509 certificates is strongly recommended, because TLS on its
+own is susceptible to man-in-the-middle attacks. Basic x509 certificate
+support provides a secure session, but no authentication. This allows any
+client to connect, and provides an encrypted session.
+
+@example
+qemu [...OPTIONS...] -vnc :1,tls,x509=/etc/pki/qemu -monitor stdio
+@end example
+
+In the above example @code{/etc/pki/qemu} should contain at least three files,
+@code{ca-cert.pem}, @code{server-cert.pem} and @code{server-key.pem}. Unprivileged
+users will want to use a private directory, for example @code{$HOME/.pki/qemu}.
+NB the @code{server-key.pem} file should be protected with file mode 0600 to
+only be readable by the user owning it.
+
+@node vnc_sec_certificate_verify
+@subsection With x509 certificates and client verification
+
+Certificates can also provide a means to authenticate the client connecting.
+The server will request that the client provide a certificate, which it will
+then validate against the CA certificate. This is a good choice if deploying
+in an environment with a private internal certificate authority.
+
+@example
+qemu [...OPTIONS...] -vnc :1,tls,x509verify=/etc/pki/qemu -monitor stdio
+@end example
+
+
+@node vnc_sec_certificate_pw
+@subsection With x509 certificates, client verification and passwords
+
+Finally, the previous method can be combined with VNC password authentication
+to provide two layers of authentication for clients.
+
+@example
+qemu [...OPTIONS...] -vnc :1,password,tls,x509verify=/etc/pki/qemu -monitor stdio
+(qemu) change vnc password
+Password: ********
+(qemu)
+@end example
+
+
+@node vnc_sec_sasl
+@subsection With SASL authentication
+
+The SASL authentication method is a VNC extension, that provides an
+easily extendable, pluggable authentication method. This allows for
+integration with a wide range of authentication mechanisms, such as
+PAM, GSSAPI/Kerberos, LDAP, SQL databases, one-time keys and more.
+The strength of the authentication depends on the exact mechanism
+configured. If the chosen mechanism also provides a SSF layer, then
+it will encrypt the datastream as well.
+
+Refer to the later docs on how to choose the exact SASL mechanism
+used for authentication, but assuming use of one supporting SSF,
+then QEMU can be launched with:
+
+@example
+qemu [...OPTIONS...] -vnc :1,sasl -monitor stdio
+@end example
+
+@node vnc_sec_certificate_sasl
+@subsection With x509 certificates and SASL authentication
+
+If the desired SASL authentication mechanism does not supported
+SSF layers, then it is strongly advised to run it in combination
+with TLS and x509 certificates. This provides securely encrypted
+data stream, avoiding risk of compromising of the security
+credentials. This can be enabled, by combining the 'sasl' option
+with the aforementioned TLS + x509 options:
+
+@example
+qemu [...OPTIONS...] -vnc :1,tls,x509,sasl -monitor stdio
+@end example
+
+
+@node vnc_generate_cert
+@subsection Generating certificates for VNC
+
+The GNU TLS packages provides a command called @code{certtool} which can
+be used to generate certificates and keys in PEM format. At a minimum it
+is neccessary to setup a certificate authority, and issue certificates to
+each server. If using certificates for authentication, then each client
+will also need to be issued a certificate. The recommendation is for the
+server to keep its certificates in either @code{/etc/pki/qemu} or for
+unprivileged users in @code{$HOME/.pki/qemu}.
+
+@menu
+* vnc_generate_ca::
+* vnc_generate_server::
+* vnc_generate_client::
+@end menu
+@node vnc_generate_ca
+@subsubsection Setup the Certificate Authority
+
+This step only needs to be performed once per organization / organizational
+unit. First the CA needs a private key. This key must be kept VERY secret
+and secure. If this key is compromised the entire trust chain of the certificates
+issued with it is lost.
+
+@example
+# certtool --generate-privkey > ca-key.pem
+@end example
+
+A CA needs to have a public certificate. For simplicity it can be a self-signed
+certificate, or one issue by a commercial certificate issuing authority. To
+generate a self-signed certificate requires one core piece of information, the
+name of the organization.
+
+@example
+# cat > ca.info <<EOF
+cn = Name of your organization
+ca
+cert_signing_key
+EOF
+# certtool --generate-self-signed \
+ --load-privkey ca-key.pem
+ --template ca.info \
+ --outfile ca-cert.pem
+@end example
+
+The @code{ca-cert.pem} file should be copied to all servers and clients wishing to utilize
+TLS support in the VNC server. The @code{ca-key.pem} must not be disclosed/copied at all.
+
+@node vnc_generate_server
+@subsubsection Issuing server certificates
+
+Each server (or host) needs to be issued with a key and certificate. When connecting
+the certificate is sent to the client which validates it against the CA certificate.
+The core piece of information for a server certificate is the hostname. This should
+be the fully qualified hostname that the client will connect with, since the client
+will typically also verify the hostname in the certificate. On the host holding the
+secure CA private key:
+
+@example
+# cat > server.info <<EOF
+organization = Name of your organization
+cn = server.foo.example.com
+tls_www_server
+encryption_key
+signing_key
+EOF
+# certtool --generate-privkey > server-key.pem
+# certtool --generate-certificate \
+ --load-ca-certificate ca-cert.pem \
+ --load-ca-privkey ca-key.pem \
+ --load-privkey server server-key.pem \
+ --template server.info \
+ --outfile server-cert.pem
+@end example
+
+The @code{server-key.pem} and @code{server-cert.pem} files should now be securely copied
+to the server for which they were generated. The @code{server-key.pem} is security
+sensitive and should be kept protected with file mode 0600 to prevent disclosure.
+
+@node vnc_generate_client
+@subsubsection Issuing client certificates
+
+If the QEMU VNC server is to use the @code{x509verify} option to validate client
+certificates as its authentication mechanism, each client also needs to be issued
+a certificate. The client certificate contains enough metadata to uniquely identify
+the client, typically organization, state, city, building, etc. On the host holding
+the secure CA private key:
+
+@example
+# cat > client.info <<EOF
+country = GB
+state = London
+locality = London
+organiazation = Name of your organization
+cn = client.foo.example.com
+tls_www_client
+encryption_key
+signing_key
+EOF
+# certtool --generate-privkey > client-key.pem
+# certtool --generate-certificate \
+ --load-ca-certificate ca-cert.pem \
+ --load-ca-privkey ca-key.pem \
+ --load-privkey client-key.pem \
+ --template client.info \
+ --outfile client-cert.pem
+@end example
+
+The @code{client-key.pem} and @code{client-cert.pem} files should now be securely
+copied to the client for which they were generated.
+
+
+@node vnc_setup_sasl
+
+@subsection Configuring SASL mechanisms
+
+The following documentation assumes use of the Cyrus SASL implementation on a
+Linux host, but the principals should apply to any other SASL impl. When SASL
+is enabled, the mechanism configuration will be loaded from system default
+SASL service config /etc/sasl2/qemu.conf. If running QEMU as an
+unprivileged user, an environment variable SASL_CONF_PATH can be used
+to make it search alternate locations for the service config.
+
+The default configuration might contain
+
+@example
+mech_list: digest-md5
+sasldb_path: /etc/qemu/passwd.db
+@end example
+
+This says to use the 'Digest MD5' mechanism, which is similar to the HTTP
+Digest-MD5 mechanism. The list of valid usernames & passwords is maintained
+in the /etc/qemu/passwd.db file, and can be updated using the saslpasswd2
+command. While this mechanism is easy to configure and use, it is not
+considered secure by modern standards, so only suitable for developers /
+ad-hoc testing.
+
+A more serious deployment might use Kerberos, which is done with the 'gssapi'
+mechanism
+
+@example
+mech_list: gssapi
+keytab: /etc/qemu/krb5.tab
+@end example
+
+For this to work the administrator of your KDC must generate a Kerberos
+principal for the server, with a name of 'qemu/somehost.example.com@@EXAMPLE.COM'
+replacing 'somehost.example.com' with the fully qualified host name of the
+machine running QEMU, and 'EXAMPLE.COM' with the Keberos Realm.
+
+Other configurations will be left as an exercise for the reader. It should
+be noted that only Digest-MD5 and GSSAPI provides a SSF layer for data
+encryption. For all other mechanisms, VNC should always be configured to
+use TLS and x509 certificates to protect security credentials from snooping.
+
+@node gdb_usage
+@section GDB usage
+
+QEMU has a primitive support to work with gdb, so that you can do
+'Ctrl-C' while the virtual machine is running and inspect its state.
+
+In order to use gdb, launch qemu with the '-s' option. It will wait for a
+gdb connection:
+@example
+> qemu -s -kernel arch/i386/boot/bzImage -hda root-2.4.20.img \
+ -append "root=/dev/hda"
+Connected to host network interface: tun0
+Waiting gdb connection on port 1234
+@end example
+
+Then launch gdb on the 'vmlinux' executable:
+@example
+> gdb vmlinux
@end example
In gdb, connect to QEMU:
(gdb) c
@end example
-Here are some useful tips in order to use gdb on system code:
+Here are some useful tips in order to use gdb on system code:
+
+@enumerate
+@item
+Use @code{info reg} to display all the CPU registers.
+@item
+Use @code{x/10i $eip} to display the code at the PC position.
+@item
+Use @code{set architecture i8086} to dump 16 bit code. Then use
+@code{x/10i $cs*16+$eip} to dump the code at the PC position.
+@end enumerate
+
+Advanced debugging options:
+
+The default single stepping behavior is step with the IRQs and timer service routines off. It is set this way because when gdb executes a single step it expects to advance beyond the current instruction. With the IRQs and and timer service routines on, a single step might jump into the one of the interrupt or exception vectors instead of executing the current instruction. This means you may hit the same breakpoint a number of times before executing the instruction gdb wants to have executed. Because there are rare circumstances where you want to single step into an interrupt vector the behavior can be controlled from GDB. There are three commands you can query and set the single step behavior:
+@table @code
+@item maintenance packet qqemu.sstepbits
+
+This will display the MASK bits used to control the single stepping IE:
+@example
+(gdb) maintenance packet qqemu.sstepbits
+sending: "qqemu.sstepbits"
+received: "ENABLE=1,NOIRQ=2,NOTIMER=4"
+@end example
+@item maintenance packet qqemu.sstep
+
+This will display the current value of the mask used when single stepping IE:
+@example
+(gdb) maintenance packet qqemu.sstep
+sending: "qqemu.sstep"
+received: "0x7"
+@end example
+@item maintenance packet Qqemu.sstep=HEX_VALUE
+
+This will change the single step mask, so if wanted to enable IRQs on the single step, but not timers, you would use:
+@example
+(gdb) maintenance packet Qqemu.sstep=0x5
+sending: "qemu.sstep=0x5"
+received: "OK"
+@end example
+@end table
+
+@node pcsys_os_specific
+@section Target OS specific information
+
+@subsection Linux
+
+To have access to SVGA graphic modes under X11, use the @code{vesa} or
+the @code{cirrus} X11 driver. For optimal performances, use 16 bit
+color depth in the guest and the host OS.
+
+When using a 2.6 guest Linux kernel, you should add the option
+@code{clock=pit} on the kernel command line because the 2.6 Linux
+kernels make very strict real time clock checks by default that QEMU
+cannot simulate exactly.
+
+When using a 2.6 guest Linux kernel, verify that the 4G/4G patch is
+not activated because QEMU is slower with this patch. The QEMU
+Accelerator Module is also much slower in this case. Earlier Fedora
+Core 3 Linux kernel (< 2.6.9-1.724_FC3) were known to incorporate this
+patch by default. Newer kernels don't have it.
+
+@subsection Windows
+
+If you have a slow host, using Windows 95 is better as it gives the
+best speed. Windows 2000 is also a good choice.
+
+@subsubsection SVGA graphic modes support
+
+QEMU emulates a Cirrus Logic GD5446 Video
+card. All Windows versions starting from Windows 95 should recognize
+and use this graphic card. For optimal performances, use 16 bit color
+depth in the guest and the host OS.
+
+If you are using Windows XP as guest OS and if you want to use high
+resolution modes which the Cirrus Logic BIOS does not support (i.e. >=
+1280x1024x16), then you should use the VESA VBE virtual graphic card
+(option @option{-std-vga}).
+
+@subsubsection CPU usage reduction
+
+Windows 9x does not correctly use the CPU HLT
+instruction. The result is that it takes host CPU cycles even when
+idle. You can install the utility from
+@url{http://www.user.cityline.ru/~maxamn/amnhltm.zip} to solve this
+problem. Note that no such tool is needed for NT, 2000 or XP.
+
+@subsubsection Windows 2000 disk full problem
+
+Windows 2000 has a bug which gives a disk full problem during its
+installation. When installing it, use the @option{-win2k-hack} QEMU
+option to enable a specific workaround. After Windows 2000 is
+installed, you no longer need this option (this option slows down the
+IDE transfers).
+
+@subsubsection Windows 2000 shutdown
+
+Windows 2000 cannot automatically shutdown in QEMU although Windows 98
+can. It comes from the fact that Windows 2000 does not automatically
+use the APM driver provided by the BIOS.
+
+In order to correct that, do the following (thanks to Struan
+Bartlett): go to the Control Panel => Add/Remove Hardware & Next =>
+Add/Troubleshoot a device => Add a new device & Next => No, select the
+hardware from a list & Next => NT Apm/Legacy Support & Next => Next
+(again) a few times. Now the driver is installed and Windows 2000 now
+correctly instructs QEMU to shutdown at the appropriate moment.
+
+@subsubsection Share a directory between Unix and Windows
+
+See @ref{sec_invocation} about the help of the option @option{-smb}.
+
+@subsubsection Windows XP security problem
+
+Some releases of Windows XP install correctly but give a security
+error when booting:
+@example
+A problem is preventing Windows from accurately checking the
+license for this computer. Error code: 0x800703e6.
+@end example
+
+The workaround is to install a service pack for XP after a boot in safe
+mode. Then reboot, and the problem should go away. Since there is no
+network while in safe mode, its recommended to download the full
+installation of SP1 or SP2 and transfer that via an ISO or using the
+vvfat block device ("-hdb fat:directory_which_holds_the_SP").
+
+@subsection MS-DOS and FreeDOS
+
+@subsubsection CPU usage reduction
+
+DOS does not correctly use the CPU HLT instruction. The result is that
+it takes host CPU cycles even when idle. You can install the utility
+from @url{http://www.vmware.com/software/dosidle210.zip} to solve this
+problem.
+
+@node QEMU System emulator for non PC targets
+@chapter QEMU System emulator for non PC targets
+
+QEMU is a generic emulator and it emulates many non PC
+machines. Most of the options are similar to the PC emulator. The
+differences are mentioned in the following sections.
+
+@menu
+* QEMU PowerPC System emulator::
+* Sparc32 System emulator::
+* Sparc64 System emulator::
+* MIPS System emulator::
+* ARM System emulator::
+* ColdFire System emulator::
+@end menu
+
+@node QEMU PowerPC System emulator
+@section QEMU PowerPC System emulator
+
+Use the executable @file{qemu-system-ppc} to simulate a complete PREP
+or PowerMac PowerPC system.
+
+QEMU emulates the following PowerMac peripherals:
+
+@itemize @minus
+@item
+UniNorth or Grackle PCI Bridge
+@item
+PCI VGA compatible card with VESA Bochs Extensions
+@item
+2 PMAC IDE interfaces with hard disk and CD-ROM support
+@item
+NE2000 PCI adapters
+@item
+Non Volatile RAM
+@item
+VIA-CUDA with ADB keyboard and mouse.
+@end itemize
+
+QEMU emulates the following PREP peripherals:
+
+@itemize @minus
+@item
+PCI Bridge
+@item
+PCI VGA compatible card with VESA Bochs Extensions
+@item
+2 IDE interfaces with hard disk and CD-ROM support
+@item
+Floppy disk
+@item
+NE2000 network adapters
+@item
+Serial port
+@item
+PREP Non Volatile RAM
+@item
+PC compatible keyboard and mouse.
+@end itemize
+
+QEMU uses the Open Hack'Ware Open Firmware Compatible BIOS available at
+@url{http://perso.magic.fr/l_indien/OpenHackWare/index.htm}.
+
+Since version 0.9.1, QEMU uses OpenBIOS @url{http://www.openbios.org/}
+for the g3beige and mac99 PowerMac machines. OpenBIOS is a free (GPL
+v2) portable firmware implementation. The goal is to implement a 100%
+IEEE 1275-1994 (referred to as Open Firmware) compliant firmware.
+
+@c man begin OPTIONS
+
+The following options are specific to the PowerPC emulation:
+
+@table @option
+
+@item -g WxH[xDEPTH]
+
+Set the initial VGA graphic mode. The default is 800x600x15.
+
+@item -prom-env string
+
+Set OpenBIOS variables in NVRAM, for example:
+
+@example
+qemu-system-ppc -prom-env 'auto-boot?=false' \
+ -prom-env 'boot-device=hd:2,\yaboot' \
+ -prom-env 'boot-args=conf=hd:2,\yaboot.conf'
+@end example
+
+These variables are not used by Open Hack'Ware.
+
+@end table
+
+@c man end
+
+
+More information is available at
+@url{http://perso.magic.fr/l_indien/qemu-ppc/}.
+
+@node Sparc32 System emulator
+@section Sparc32 System emulator
+
+Use the executable @file{qemu-system-sparc} to simulate the following
+Sun4m architecture machines:
+@itemize @minus
+@item
+SPARCstation 4
+@item
+SPARCstation 5
+@item
+SPARCstation 10
+@item
+SPARCstation 20
+@item
+SPARCserver 600MP
+@item
+SPARCstation LX
+@item
+SPARCstation Voyager
+@item
+SPARCclassic
+@item
+SPARCbook
+@end itemize
+
+The emulation is somewhat complete. SMP up to 16 CPUs is supported,
+but Linux limits the number of usable CPUs to 4.
+
+It's also possible to simulate a SPARCstation 2 (sun4c architecture),
+SPARCserver 1000, or SPARCcenter 2000 (sun4d architecture), but these
+emulators are not usable yet.
+
+QEMU emulates the following sun4m/sun4c/sun4d peripherals:
+
+@itemize @minus
+@item
+IOMMU or IO-UNITs
+@item
+TCX Frame buffer
+@item
+Lance (Am7990) Ethernet
+@item
+Non Volatile RAM M48T02/M48T08
+@item
+Slave I/O: timers, interrupt controllers, Zilog serial ports, keyboard
+and power/reset logic
+@item
+ESP SCSI controller with hard disk and CD-ROM support
+@item
+Floppy drive (not on SS-600MP)
+@item
+CS4231 sound device (only on SS-5, not working yet)
+@end itemize
+
+The number of peripherals is fixed in the architecture. Maximum
+memory size depends on the machine type, for SS-5 it is 256MB and for
+others 2047MB.
+
+Since version 0.8.2, QEMU uses OpenBIOS
+@url{http://www.openbios.org/}. OpenBIOS is a free (GPL v2) portable
+firmware implementation. The goal is to implement a 100% IEEE
+1275-1994 (referred to as Open Firmware) compliant firmware.
+
+A sample Linux 2.6 series kernel and ram disk image are available on
+the QEMU web site. There are still issues with NetBSD and OpenBSD, but
+some kernel versions work. Please note that currently Solaris kernels
+don't work probably due to interface issues between OpenBIOS and
+Solaris.
+
+@c man begin OPTIONS
+
+The following options are specific to the Sparc32 emulation:
+
+@table @option
+
+@item -g WxHx[xDEPTH]
+
+Set the initial TCX graphic mode. The default is 1024x768x8, currently
+the only other possible mode is 1024x768x24.
+
+@item -prom-env string
+
+Set OpenBIOS variables in NVRAM, for example:
+
+@example
+qemu-system-sparc -prom-env 'auto-boot?=false' \
+ -prom-env 'boot-device=sd(0,2,0):d' -prom-env 'boot-args=linux single'
+@end example
+
+@item -M [SS-4|SS-5|SS-10|SS-20|SS-600MP|LX|Voyager|SPARCClassic|SPARCbook|SS-2|SS-1000|SS-2000]
+
+Set the emulated machine type. Default is SS-5.
+
+@end table
+
+@c man end
+
+@node Sparc64 System emulator
+@section Sparc64 System emulator
+
+Use the executable @file{qemu-system-sparc64} to simulate a Sun4u
+(UltraSPARC PC-like machine), Sun4v (T1 PC-like machine), or generic
+Niagara (T1) machine. The emulator is not usable for anything yet, but
+it can launch some kernels.
+
+QEMU emulates the following peripherals:
+
+@itemize @minus
+@item
+UltraSparc IIi APB PCI Bridge
+@item
+PCI VGA compatible card with VESA Bochs Extensions
+@item
+PS/2 mouse and keyboard
+@item
+Non Volatile RAM M48T59
+@item
+PC-compatible serial ports
+@item
+2 PCI IDE interfaces with hard disk and CD-ROM support
+@item
+Floppy disk
+@end itemize
+
+@c man begin OPTIONS
+
+The following options are specific to the Sparc64 emulation:
+
+@table @option
+
+@item -prom-env string
+
+Set OpenBIOS variables in NVRAM, for example:
+
+@example
+qemu-system-sparc64 -prom-env 'auto-boot?=false'
+@end example
+
+@item -M [sun4u|sun4v|Niagara]
+
+Set the emulated machine type. The default is sun4u.
+
+@end table
+
+@c man end
+
+@node MIPS System emulator
+@section MIPS System emulator
+
+Four executables cover simulation of 32 and 64-bit MIPS systems in
+both endian options, @file{qemu-system-mips}, @file{qemu-system-mipsel}
+@file{qemu-system-mips64} and @file{qemu-system-mips64el}.
+Five different machine types are emulated:
+
+@itemize @minus
+@item
+A generic ISA PC-like machine "mips"
+@item
+The MIPS Malta prototype board "malta"
+@item
+An ACER Pica "pica61". This machine needs the 64-bit emulator.
+@item
+MIPS emulator pseudo board "mipssim"
+@item
+A MIPS Magnum R4000 machine "magnum". This machine needs the 64-bit emulator.
+@end itemize
+
+The generic emulation is supported by Debian 'Etch' and is able to
+install Debian into a virtual disk image. The following devices are
+emulated:
+
+@itemize @minus
+@item
+A range of MIPS CPUs, default is the 24Kf
+@item
+PC style serial port
+@item
+PC style IDE disk
+@item
+NE2000 network card
+@end itemize
+
+The Malta emulation supports the following devices:
+
+@itemize @minus
+@item
+Core board with MIPS 24Kf CPU and Galileo system controller
+@item
+PIIX4 PCI/USB/SMbus controller
+@item
+The Multi-I/O chip's serial device
+@item
+PCnet32 PCI network card
+@item
+Malta FPGA serial device
+@item
+Cirrus (default) or any other PCI VGA graphics card
+@end itemize
+
+The ACER Pica emulation supports:
+
+@itemize @minus
+@item
+MIPS R4000 CPU
+@item
+PC-style IRQ and DMA controllers
+@item
+PC Keyboard
+@item
+IDE controller
+@end itemize
+
+The mipssim pseudo board emulation provides an environment similiar
+to what the proprietary MIPS emulator uses for running Linux.
+It supports:
+
+@itemize @minus
+@item
+A range of MIPS CPUs, default is the 24Kf
+@item
+PC style serial port
+@item
+MIPSnet network emulation
+@end itemize
+
+The MIPS Magnum R4000 emulation supports:
+
+@itemize @minus
+@item
+MIPS R4000 CPU
+@item
+PC-style IRQ controller
+@item
+PC Keyboard
+@item
+SCSI controller
+@item
+G364 framebuffer
+@end itemize
+
+
+@node ARM System emulator
+@section ARM System emulator
+
+Use the executable @file{qemu-system-arm} to simulate a ARM
+machine. The ARM Integrator/CP board is emulated with the following
+devices:
+
+@itemize @minus
+@item
+ARM926E, ARM1026E, ARM946E, ARM1136 or Cortex-A8 CPU
+@item
+Two PL011 UARTs
+@item
+SMC 91c111 Ethernet adapter
+@item
+PL110 LCD controller
+@item
+PL050 KMI with PS/2 keyboard and mouse.
+@item
+PL181 MultiMedia Card Interface with SD card.
+@end itemize
+
+The ARM Versatile baseboard is emulated with the following devices:
+
+@itemize @minus
+@item
+ARM926E, ARM1136 or Cortex-A8 CPU
+@item
+PL190 Vectored Interrupt Controller
+@item
+Four PL011 UARTs
+@item
+SMC 91c111 Ethernet adapter
+@item
+PL110 LCD controller
+@item
+PL050 KMI with PS/2 keyboard and mouse.
+@item
+PCI host bridge. Note the emulated PCI bridge only provides access to
+PCI memory space. It does not provide access to PCI IO space.
+This means some devices (eg. ne2k_pci NIC) are not usable, and others
+(eg. rtl8139 NIC) are only usable when the guest drivers use the memory
+mapped control registers.
+@item
+PCI OHCI USB controller.
+@item
+LSI53C895A PCI SCSI Host Bus Adapter with hard disk and CD-ROM devices.
+@item
+PL181 MultiMedia Card Interface with SD card.
+@end itemize
+
+The ARM RealView Emulation baseboard is emulated with the following devices:
+
+@itemize @minus
+@item
+ARM926E, ARM1136, ARM11MPCORE(x4) or Cortex-A8 CPU
+@item
+ARM AMBA Generic/Distributed Interrupt Controller
+@item
+Four PL011 UARTs
+@item
+SMC 91c111 Ethernet adapter
+@item
+PL110 LCD controller
+@item
+PL050 KMI with PS/2 keyboard and mouse
+@item
+PCI host bridge
+@item
+PCI OHCI USB controller
+@item
+LSI53C895A PCI SCSI Host Bus Adapter with hard disk and CD-ROM devices
+@item
+PL181 MultiMedia Card Interface with SD card.
+@end itemize
+
+The XScale-based clamshell PDA models ("Spitz", "Akita", "Borzoi"
+and "Terrier") emulation includes the following peripherals:
+
+@itemize @minus
+@item
+Intel PXA270 System-on-chip (ARM V5TE core)
+@item
+NAND Flash memory
+@item
+IBM/Hitachi DSCM microdrive in a PXA PCMCIA slot - not in "Akita"
+@item
+On-chip OHCI USB controller
+@item
+On-chip LCD controller
+@item
+On-chip Real Time Clock
+@item
+TI ADS7846 touchscreen controller on SSP bus
+@item
+Maxim MAX1111 analog-digital converter on I@math{^2}C bus
+@item
+GPIO-connected keyboard controller and LEDs
+@item
+Secure Digital card connected to PXA MMC/SD host
+@item
+Three on-chip UARTs
+@item
+WM8750 audio CODEC on I@math{^2}C and I@math{^2}S busses
+@end itemize
+
+The Palm Tungsten|E PDA (codename "Cheetah") emulation includes the
+following elements:
-@enumerate
+@itemize @minus
@item
-Use @code{info reg} to display all the CPU registers.
+Texas Instruments OMAP310 System-on-chip (ARM 925T core)
@item
-Use @code{x/10i $eip} to display the code at the PC position.
+ROM and RAM memories (ROM firmware image can be loaded with -option-rom)
@item
-Use @code{set architecture i8086} to dump 16 bit code. Then use
-@code{x/10i $cs*16+*eip} to dump the code at the PC position.
-@end enumerate
+On-chip LCD controller
+@item
+On-chip Real Time Clock
+@item
+TI TSC2102i touchscreen controller / analog-digital converter / Audio
+CODEC, connected through MicroWire and I@math{^2}S busses
+@item
+GPIO-connected matrix keypad
+@item
+Secure Digital card connected to OMAP MMC/SD host
+@item
+Three on-chip UARTs
+@end itemize
-@section Target OS specific information
+Nokia N800 and N810 internet tablets (known also as RX-34 and RX-44 / 48)
+emulation supports the following elements:
-@subsection Linux
+@itemize @minus
+@item
+Texas Instruments OMAP2420 System-on-chip (ARM 1136 core)
+@item
+RAM and non-volatile OneNAND Flash memories
+@item
+Display connected to EPSON remote framebuffer chip and OMAP on-chip
+display controller and a LS041y3 MIPI DBI-C controller
+@item
+TI TSC2301 (in N800) and TI TSC2005 (in N810) touchscreen controllers
+driven through SPI bus
+@item
+National Semiconductor LM8323-controlled qwerty keyboard driven
+through I@math{^2}C bus
+@item
+Secure Digital card connected to OMAP MMC/SD host
+@item
+Three OMAP on-chip UARTs and on-chip STI debugging console
+@item
+A Bluetooth(R) transciever and HCI connected to an UART
+@item
+Mentor Graphics "Inventra" dual-role USB controller embedded in a TI
+TUSB6010 chip - only USB host mode is supported
+@item
+TI TMP105 temperature sensor driven through I@math{^2}C bus
+@item
+TI TWL92230C power management companion with an RTC on I@math{^2}C bus
+@item
+Nokia RETU and TAHVO multi-purpose chips with an RTC, connected
+through CBUS
+@end itemize
-To have access to SVGA graphic modes under X11, use the @code{vesa} or
-the @code{cirrus} X11 driver. For optimal performances, use 16 bit
-color depth in the guest and the host OS.
+The Luminary Micro Stellaris LM3S811EVB emulation includes the following
+devices:
-When using a 2.6 guest Linux kernel, you should add the option
-@code{clock=pit} on the kernel command line because the 2.6 Linux
-kernels make very strict real time clock checks by default that QEMU
-cannot simulate exactly.
+@itemize @minus
+@item
+Cortex-M3 CPU core.
+@item
+64k Flash and 8k SRAM.
+@item
+Timers, UARTs, ADC and I@math{^2}C interface.
+@item
+OSRAM Pictiva 96x16 OLED with SSD0303 controller on I@math{^2}C bus.
+@end itemize
-When using a 2.6 guest Linux kernel, verify that the 4G/4G patch is
-not activated because QEMU is slower with this patch. The QEMU
-Accelerator Module is also much slower in this case. Earlier Fedora
-Core 3 Linux kernel (< 2.6.9-1.724_FC3) were known to incorporte this
-patch by default. Newer kernels don't have it.
+The Luminary Micro Stellaris LM3S6965EVB emulation includes the following
+devices:
-@subsection Windows
+@itemize @minus
+@item
+Cortex-M3 CPU core.
+@item
+256k Flash and 64k SRAM.
+@item
+Timers, UARTs, ADC, I@math{^2}C and SSI interfaces.
+@item
+OSRAM Pictiva 128x64 OLED with SSD0323 controller connected via SSI.
+@end itemize
-If you have a slow host, using Windows 95 is better as it gives the
-best speed. Windows 2000 is also a good choice.
+The Freecom MusicPal internet radio emulation includes the following
+elements:
-@subsubsection SVGA graphic modes support
+@itemize @minus
+@item
+Marvell MV88W8618 ARM core.
+@item
+32 MB RAM, 256 KB SRAM, 8 MB flash.
+@item
+Up to 2 16550 UARTs
+@item
+MV88W8xx8 Ethernet controller
+@item
+MV88W8618 audio controller, WM8750 CODEC and mixer
+@item
+128×64 display with brightness control
+@item
+2 buttons, 2 navigation wheels with button function
+@end itemize
-QEMU emulates a Cirrus Logic GD5446 Video
-card. All Windows versions starting from Windows 95 should recognize
-and use this graphic card. For optimal performances, use 16 bit color
-depth in the guest and the host OS.
+The Siemens SX1 models v1 and v2 (default) basic emulation.
+The emulaton includes the following elements:
-@subsubsection CPU usage reduction
+@itemize @minus
+@item
+Texas Instruments OMAP310 System-on-chip (ARM 925T core)
+@item
+ROM and RAM memories (ROM firmware image can be loaded with -pflash)
+V1
+1 Flash of 16MB and 1 Flash of 8MB
+V2
+1 Flash of 32MB
+@item
+On-chip LCD controller
+@item
+On-chip Real Time Clock
+@item
+Secure Digital card connected to OMAP MMC/SD host
+@item
+Three on-chip UARTs
+@end itemize
-Windows 9x does not correctly use the CPU HLT
-instruction. The result is that it takes host CPU cycles even when
-idle. You can install the utility from
-@url{http://www.user.cityline.ru/~maxamn/amnhltm.zip} to solve this
-problem. Note that no such tool is needed for NT, 2000 or XP.
+The "Syborg" Symbian Virtual Platform base model includes the following
+elements:
-@subsubsection Windows 2000 disk full problems
+@itemize @minus
+@item
+ARM Cortex-A8 CPU
+@item
+Interrupt controller
+@item
+Timer
+@item
+Real Time Clock
+@item
+Keyboard
+@item
+Framebuffer
+@item
+Touchscreen
+@item
+UARTs
+@end itemize
-Currently (release 0.6.0) QEMU has a bug which gives a @code{disk
-full} error during installation of some releases of Windows 2000. The
-workaround is to stop QEMU as soon as you notice that your disk image
-size is growing too fast (monitor it with @code{ls -ls}). Then
-relaunch QEMU to continue the installation. If you still experience
-the problem, relaunch QEMU again.
+A Linux 2.6 test image is available on the QEMU web site. More
+information is available in the QEMU mailing-list archive.
-Future QEMU releases are likely to correct this bug.
+@c man begin OPTIONS
-@subsubsection Windows XP security problems
+The following options are specific to the ARM emulation:
-Some releases of Windows XP install correctly but give a security
-error when booting:
-@example
-A problem is preventing Windows from accurately checking the
-license for this computer. Error code: 0x800703e6.
-@end example
-The only known workaround is to boot in Safe mode
-without networking support.
+@table @option
-Future QEMU releases are likely to correct this bug.
+@item -semihosting
+Enable semihosting syscall emulation.
-@subsection MS-DOS and FreeDOS
+On ARM this implements the "Angel" interface.
-@subsubsection CPU usage reduction
+Note that this allows guest direct access to the host filesystem,
+so should only be used with trusted guest OS.
-DOS does not correctly use the CPU HLT instruction. The result is that
-it takes host CPU cycles even when idle. You can install the utility
-from @url{http://www.vmware.com/software/dosidle210.zip} to solve this
-problem.
+@end table
-@chapter QEMU PowerPC System emulator invocation
+@node ColdFire System emulator
+@section ColdFire System emulator
-Use the executable @file{qemu-system-ppc} to simulate a complete PREP
-or PowerMac PowerPC system.
+Use the executable @file{qemu-system-m68k} to simulate a ColdFire machine.
+The emulator is able to boot a uClinux kernel.
-QEMU emulates the following PowerMac peripherials:
+The M5208EVB emulation includes the following devices:
@itemize @minus
-@item
-UniNorth PCI Bridge
@item
-PCI VGA compatible card with VESA Bochs Extensions
-@item
-2 PMAC IDE interfaces with hard disk and CD-ROM support
-@item
-NE2000 PCI adapters
+MCF5208 ColdFire V2 Microprocessor (ISA A+ with EMAC).
@item
-Non Volatile RAM
+Three Two on-chip UARTs.
@item
-VIA-CUDA with ADB keyboard and mouse.
+Fast Ethernet Controller (FEC)
@end itemize
-QEMU emulates the following PREP peripherials:
+The AN5206 emulation includes the following devices:
@itemize @minus
-@item
-PCI Bridge
-@item
-PCI VGA compatible card with VESA Bochs Extensions
-@item
-2 IDE interfaces with hard disk and CD-ROM support
@item
-Floppy disk
-@item
-NE2000 network adapters
-@item
-Serial port
+MCF5206 ColdFire V2 Microprocessor.
@item
-PREP Non Volatile RAM
-@item
-PC compatible keyboard and mouse.
+Two on-chip UARTs.
@end itemize
-QEMU uses the Open Hack'Ware Open Firmware Compatible BIOS available at
-@url{http://site.voila.fr/jmayer/OpenHackWare/index.htm}.
-
-You can read the qemu PC system emulation chapter to have more
-informations about QEMU usage.
-
@c man begin OPTIONS
-The following options are specific to the PowerPC emulation:
+The following options are specific to the ARM emulation:
@table @option
-@item -prep
-Simulate a PREP system (default is PowerMAC)
+@item -semihosting
+Enable semihosting syscall emulation.
-@item -g WxH[xDEPTH]
+On M68K this implements the "ColdFire GDB" interface used by libgloss.
-Set the initial VGA graphic mode. The default is 800x600x15.
+Note that this allows guest direct access to the host filesystem,
+so should only be used with trusted guest OS.
@end table
-@c man end
+@node QEMU User space emulator
+@chapter QEMU User space emulator
+@menu
+* Supported Operating Systems ::
+* Linux User space emulator::
+* Mac OS X/Darwin User space emulator ::
+* BSD User space emulator ::
+@end menu
-More information is available at
-@url{http://jocelyn.mayer.free.fr/qemu-ppc/}.
-
-@chapter Sparc System emulator invocation
+@node Supported Operating Systems
+@section Supported Operating Systems
-Use the executable @file{qemu-system-sparc} to simulate a JavaStation
-(sun4m architecture). The emulation is far from complete.
-
-QEMU emulates the following sun4m peripherials:
+The following OS are supported in user space emulation:
@itemize @minus
-@item
-IOMMU
@item
-TCX Frame buffer
-@item
-Lance (Am7990) Ethernet
+Linux (referred as qemu-linux-user)
@item
-Non Volatile RAM M48T08
+Mac OS X/Darwin (referred as qemu-darwin-user)
@item
-Slave I/O: timers, interrupt controllers, Zilog serial ports
+BSD (referred as qemu-bsd-user)
@end itemize
-QEMU uses the Proll, a PROM replacement available at
-@url{http://people.redhat.com/zaitcev/linux/}.
+@node Linux User space emulator
+@section Linux User space emulator
-@chapter QEMU User space emulator invocation
+@menu
+* Quick Start::
+* Wine launch::
+* Command line options::
+* Other binaries::
+@end menu
-@section Quick Start
+@node Quick Start
+@subsection Quick Start
In order to launch a Linux process, QEMU needs the process executable
-itself and all the target (x86) dynamic libraries used by it.
+itself and all the target (x86) dynamic libraries used by it.
@itemize
@item On x86, you can just try to launch any process by using the native
libraries:
-@example
+@example
qemu-i386 -L / /bin/ls
@end example
@code{-L /} tells that the x86 dynamic linker must be searched with a
@file{/} prefix.
-@item Since QEMU is also a linux process, you can launch qemu with qemu (NOTE: you can only do that if you compiled QEMU from the sources):
+@item Since QEMU is also a linux process, you can launch qemu with
+qemu (NOTE: you can only do that if you compiled QEMU from the sources):
-@example
+@example
qemu-i386 -L / qemu-i386 -L / /bin/ls
@end example
@code{LD_LIBRARY_PATH} is not set:
@example
-unset LD_LIBRARY_PATH
+unset LD_LIBRARY_PATH
@end example
Then you can launch the precompiled @file{ls} x86 executable:
@item The x86 version of QEMU is also included. You can try weird things such as:
@example
-qemu-i386 /usr/local/qemu-i386/bin/qemu-i386 /usr/local/qemu-i386/bin/ls-i386
+qemu-i386 /usr/local/qemu-i386/bin/qemu-i386 \
+ /usr/local/qemu-i386/bin/ls-i386
@end example
@end itemize
-@section Wine launch
+@node Wine launch
+@subsection Wine launch
@itemize
@end example
@item Download the binary x86 Wine install
-(@file{qemu-XXX-i386-wine.tar.gz} on the QEMU web page).
+(@file{qemu-XXX-i386-wine.tar.gz} on the QEMU web page).
@item Configure Wine on your account. Look at the provided script
-@file{/usr/local/qemu-i386/bin/wine-conf.sh}. Your previous
+@file{/usr/local/qemu-i386/@/bin/wine-conf.sh}. Your previous
@code{$@{HOME@}/.wine} directory is saved to @code{$@{HOME@}/.wine.org}.
@item Then you can try the example @file{putty.exe}:
@example
-qemu-i386 /usr/local/qemu-i386/wine/bin/wine /usr/local/qemu-i386/wine/c/Program\ Files/putty.exe
+qemu-i386 /usr/local/qemu-i386/wine/bin/wine \
+ /usr/local/qemu-i386/wine/c/Program\ Files/putty.exe
@end example
@end itemize
-@section Command line options
+@node Command line options
+@subsection Command line options
@example
-usage: qemu-i386 [-h] [-d] [-L path] [-s size] program [arguments...]
+usage: qemu-i386 [-h] [-d] [-L path] [-s size] [-cpu model] [-g port] program [arguments...]
@end example
@table @option
@item -h
Print the help
-@item -L path
+@item -L path
Set the x86 elf interpreter prefix (default=/usr/local/qemu-i386)
@item -s size
Set the x86 stack size in bytes (default=524288)
+@item -cpu model
+Select CPU model (-cpu ? for list and additional feature selection)
+@end table
+
+Debug options:
+
+@table @option
+@item -d
+Activate log (logfile=/tmp/qemu.log)
+@item -p pagesize
+Act as if the host page size was 'pagesize' bytes
+@item -g port
+Wait gdb connection to port
+@item -singlestep
+Run the emulation in single step mode.
+@end table
+
+Environment variables:
+
+@table @env
+@item QEMU_STRACE
+Print system calls and arguments similar to the 'strace' program
+(NOTE: the actual 'strace' program will not work because the user
+space emulator hasn't implemented ptrace). At the moment this is
+incomplete. All system calls that don't have a specific argument
+format are printed with information for six arguments. Many
+flag-style arguments don't have decoders and will show up as numbers.
+@end table
+
+@node Other binaries
+@subsection Other binaries
+
+@command{qemu-arm} is also capable of running ARM "Angel" semihosted ELF
+binaries (as implemented by the arm-elf and arm-eabi Newlib/GDB
+configurations), and arm-uclinux bFLT format binaries.
+
+@command{qemu-m68k} is capable of running semihosted binaries using the BDM
+(m5xxx-ram-hosted.ld) or m68k-sim (sim.ld) syscall interfaces, and
+coldfire uClinux bFLT format binaries.
+
+The binary format is detected automatically.
+
+@command{qemu-sparc} can execute Sparc32 binaries (Sparc32 CPU, 32 bit ABI).
+
+@command{qemu-sparc32plus} can execute Sparc32 and SPARC32PLUS binaries
+(Sparc64 CPU, 32 bit ABI).
+
+@command{qemu-sparc64} can execute some Sparc64 (Sparc64 CPU, 64 bit ABI) and
+SPARC32PLUS binaries (Sparc64 CPU, 32 bit ABI).
+
+@node Mac OS X/Darwin User space emulator
+@section Mac OS X/Darwin User space emulator
+
+@menu
+* Mac OS X/Darwin Status::
+* Mac OS X/Darwin Quick Start::
+* Mac OS X/Darwin Command line options::
+@end menu
+
+@node Mac OS X/Darwin Status
+@subsection Mac OS X/Darwin Status
+
+@itemize @minus
+@item
+target x86 on x86: Most apps (Cocoa and Carbon too) works. [1]
+@item
+target PowerPC on x86: Not working as the ppc commpage can't be mapped (yet!)
+@item
+target PowerPC on PowerPC: Most apps (Cocoa and Carbon too) works. [1]
+@item
+target x86 on PowerPC: most utilities work. Cocoa and Carbon apps are not yet supported.
+@end itemize
+
+[1] If you're host commpage can be executed by qemu.
+
+@node Mac OS X/Darwin Quick Start
+@subsection Quick Start
+
+In order to launch a Mac OS X/Darwin process, QEMU needs the process executable
+itself and all the target dynamic libraries used by it. If you don't have the FAT
+libraries (you're running Mac OS X/ppc) you'll need to obtain it from a Mac OS X
+CD or compile them by hand.
+
+@itemize
+
+@item On x86, you can just try to launch any process by using the native
+libraries:
+
+@example
+qemu-i386 /bin/ls
+@end example
+
+or to run the ppc version of the executable:
+
+@example
+qemu-ppc /bin/ls
+@end example
+
+@item On ppc, you'll have to tell qemu where your x86 libraries (and dynamic linker)
+are installed:
+
+@example
+qemu-i386 -L /opt/x86_root/ /bin/ls
+@end example
+
+@code{-L /opt/x86_root/} tells that the dynamic linker (dyld) path is in
+@file{/opt/x86_root/usr/bin/dyld}.
+
+@end itemize
+
+@node Mac OS X/Darwin Command line options
+@subsection Command line options
+
+@example
+usage: qemu-i386 [-h] [-d] [-L path] [-s size] program [arguments...]
+@end example
+
+@table @option
+@item -h
+Print the help
+@item -L path
+Set the library root path (default=/)
+@item -s size
+Set the stack size in bytes (default=524288)
+@end table
+
+Debug options:
+
+@table @option
+@item -d
+Activate log (logfile=/tmp/qemu.log)
+@item -p pagesize
+Act as if the host page size was 'pagesize' bytes
+@item -singlestep
+Run the emulation in single step mode.
+@end table
+
+@node BSD User space emulator
+@section BSD User space emulator
+
+@menu
+* BSD Status::
+* BSD Quick Start::
+* BSD Command line options::
+@end menu
+
+@node BSD Status
+@subsection BSD Status
+
+@itemize @minus
+@item
+target Sparc64 on Sparc64: Some trivial programs work.
+@end itemize
+
+@node BSD Quick Start
+@subsection Quick Start
+
+In order to launch a BSD process, QEMU needs the process executable
+itself and all the target dynamic libraries used by it.
+
+@itemize
+
+@item On Sparc64, you can just try to launch any process by using the native
+libraries:
+
+@example
+qemu-sparc64 /bin/ls
+@end example
+
+@end itemize
+
+@node BSD Command line options
+@subsection Command line options
+
+@example
+usage: qemu-sparc64 [-h] [-d] [-L path] [-s size] [-bsd type] program [arguments...]
+@end example
+
+@table @option
+@item -h
+Print the help
+@item -L path
+Set the library root path (default=/)
+@item -s size
+Set the stack size in bytes (default=524288)
+@item -bsd type
+Set the type of the emulated BSD Operating system. Valid values are
+FreeBSD, NetBSD and OpenBSD (default).
@end table
Debug options:
Activate log (logfile=/tmp/qemu.log)
@item -p pagesize
Act as if the host page size was 'pagesize' bytes
+@item -singlestep
+Run the emulation in single step mode.
@end table
@node compilation
@chapter Compilation from the sources
+@menu
+* Linux/Unix::
+* Windows::
+* Cross compilation for Windows with Linux::
+* Mac OS X::
+@end menu
+
+@node Linux/Unix
@section Linux/Unix
@subsection Compilation
@end example
to install QEMU in @file{/usr/local}.
-@subsection Tested tool versions
-
-In order to compile QEMU succesfully, it is very important that you
-have the right tools. The most important one is gcc. I cannot guaranty
-that QEMU works if you do not use a tested gcc version. Look at
-'configure' and 'Makefile' if you want to make a different gcc
-version work.
-
-@example
-host gcc binutils glibc linux distribution
-----------------------------------------------------------------------
-x86 3.2 2.13.2 2.1.3 2.4.18
- 2.96 2.11.93.0.2 2.2.5 2.4.18 Red Hat 7.3
- 3.2.2 2.13.90.0.18 2.3.2 2.4.20 Red Hat 9
-
-PowerPC 3.3 [4] 2.13.90.0.18 2.3.1 2.4.20briq
- 3.2
-
-Alpha 3.3 [1] 2.14.90.0.4 2.2.5 2.2.20 [2] Debian 3.0
-
-Sparc32 2.95.4 2.12.90.0.1 2.2.5 2.4.18 Debian 3.0
-
-ARM 2.95.4 2.12.90.0.1 2.2.5 2.4.9 [3] Debian 3.0
-
-[1] On Alpha, QEMU needs the gcc 'visibility' attribute only available
- for gcc version >= 3.3.
-[2] Linux >= 2.4.20 is necessary for precise exception support
- (untested).
-[3] 2.4.9-ac10-rmk2-np1-cerf2
-
-[4] gcc 2.95.x generates invalid code when using too many register
-variables. You must use gcc 3.x on PowerPC.
-@end example
-
+@node Windows
@section Windows
@itemize
@url{http://www.mingw.org/}. You can find detailed installation
instructions in the download section and the FAQ.
-@item Download
+@item Download
the MinGW development library of SDL 1.2.x
-(@file{SDL-devel-1.2.x-mingw32.tar.gz}) from
+(@file{SDL-devel-1.2.x-@/mingw32.tar.gz}) from
@url{http://www.libsdl.org}. Unpack it in a temporary place, and
unpack the archive @file{i386-mingw32msvc.tar.gz} in the MinGW tool
directory. Edit the @file{sdl-config} script so that it gives the
correct SDL directory when invoked.
@item Extract the current version of QEMU.
-
+
@item Start the MSYS shell (file @file{msys.bat}).
-@item Change to the QEMU directory. Launch @file{./configure} and
+@item Change to the QEMU directory. Launch @file{./configure} and
@file{make}. If you have problems using SDL, verify that
@file{sdl-config} can be launched from the MSYS command line.
-@item You can install QEMU in @file{Program Files/Qemu} by typing
+@item You can install QEMU in @file{Program Files/Qemu} by typing
@file{make install}. Don't forget to copy @file{SDL.dll} in
@file{Program Files/Qemu}.
@end itemize
+@node Cross compilation for Windows with Linux
@section Cross compilation for Windows with Linux
@itemize
Install the MinGW cross compilation tools available at
@url{http://www.mingw.org/}.
-@item
+@item
Install the Win32 version of SDL (@url{http://www.libsdl.org}) by
unpacking @file{i386-mingw32msvc.tar.gz}. Set up the PATH environment
variable so that @file{i386-mingw32msvc-sdl-config} can be launched by
the QEMU configuration script.
-@item
+@item
Configure QEMU for Windows cross compilation:
@example
./configure --enable-mingw32
@end example
If necessary, you can change the cross-prefix according to the prefix
-choosen for the MinGW tools with --cross-prefix. You can also use
+chosen for the MinGW tools with --cross-prefix. You can also use
--prefix to set the Win32 install path.
-@item You can install QEMU in the installation directory by typing
+@item You can install QEMU in the installation directory by typing
@file{make install}. Don't forget to copy @file{SDL.dll} in the
-installation directory.
+installation directory.
@end itemize
Note: Currently, Wine does not seem able to launch
QEMU for Win32.
+@node Mac OS X
@section Mac OS X
The Mac OS X patches are not fully merged in QEMU, so you should look
at the QEMU mailing list archive to have all the necessary
information.
+@node Index
+@chapter Index
+@printindex cp
+
+@bye
projects / qemu / blobdiff