show the current VM UUID
@item info cpustats
show CPU statistics
-@item info slirp
-show SLIRP statistics (if available)
+@item info usernet
+show user network stack connection states
@item info migrate
show migration status
@item info balloon
Read I/O port.
ETEXI
+ { "o", "/ii", do_ioport_write,
+ "/fmt addr value", "I/O port write" },
+STEXI
+Write to I/O port.
+ETEXI
{ "sendkey", "si?", do_sendkey,
"keys [hold_ms]", "send keys to the VM (e.g. 'sendkey ctrl-alt-f1', default hold time=100 ms)" },
ETEXI
#if defined(TARGET_I386)
- { "drive_add", "ss", drive_hot_add, "pci_addr=[[<domain>:]<bus>:]<slot>\n"
+ { "drive_add", "ss", drive_hot_add, "[[<domain>:]<bus>:]<slot>\n"
"[file=file][,if=type][,bus=n]\n"
"[,unit=m][,media=d][index=i]\n"
"[,cyls=c,heads=h,secs=s[,trans=t]]\n"
ETEXI
#if defined(TARGET_I386)
- { "pci_add", "sss", pci_device_hot_add, "pci_addr=auto|[[<domain>:]<bus>:]<slot> nic|storage [[vlan=n][,macaddr=addr][,model=type]] [file=file][,if=type][,bus=nr]...", "hot-add PCI device" },
+ { "pci_add", "sss?", pci_device_hot_add, "auto|[[<domain>:]<bus>:]<slot> nic|storage [[vlan=n][,macaddr=addr][,model=type]] [file=file][,if=type][,bus=nr]...", "hot-add PCI device" },
#endif
STEXI
@item pci_add
ETEXI
#if defined(TARGET_I386)
- { "pci_del", "s", pci_device_hot_remove, "pci_addr=[[<domain>:]<bus>:]<slot>", "hot remove PCI device" },
+ { "pci_del", "s", pci_device_hot_remove, "[[<domain>:]<bus>:]<slot>", "hot remove PCI device" },
#endif
STEXI
@item pci_del
ETEXI
#ifdef CONFIG_SLIRP
- { "hostfwd_add", "s", net_slirp_hostfwd_add,
- "[tcp|udp]:[hostaddr]:hostport-[guestaddr]:guestport",
+ { "hostfwd_add", "ss?s?", net_slirp_hostfwd_add,
+ "[vlan_id name] [tcp|udp]:[hostaddr]:hostport-[guestaddr]:guestport",
"redirect TCP or UDP connections from host to guest (requires -net user)" },
- { "hostfwd_remove", "s", net_slirp_hostfwd_remove,
- "[tcp|udp]:[hostaddr]:hostport",
+ { "hostfwd_remove", "ss?s?", net_slirp_hostfwd_remove,
+ "[vlan_id name] [tcp|udp]:[hostaddr]:hostport",
"remove host-to-guest TCP or UDP redirection" },
#endif
STEXI
Change watchdog action.
ETEXI
- { "acl", "sss?i?", do_acl, "<command> <aclname> [<match> [<index>]]\n",
- "acl show vnc.username\n"
- "acl policy vnc.username deny\n"
- "acl allow vnc.username fred\n"
- "acl deny vnc.username bob\n"
- "acl reset vnc.username\n" },
+ { "acl_show", "s", do_acl_show, "aclname",
+ "list rules in the access control list" },
STEXI
-@item acl @var{subcommand} @var{aclname} @var{match} @var{index}
-
-Manage access control lists for network services. There are currently
-two named access control lists, @var{vnc.x509dname} and @var{vnc.username}
-matching on the x509 client certificate distinguished name, and SASL
-username respectively.
+@item acl_show @var{aclname}
+List all the matching rules in the access control list, and the default
+policy. There are currently two named access control lists,
+@var{vnc.x509dname} and @var{vnc.username} matching on the x509 client
+certificate distinguished name, and SASL username respectively.
+ETEXI
-@table @option
-@item acl show <aclname>
-list all the match rules in the access control list, and the default
-policy
-@item acl policy <aclname> @code{allow|deny}
-set the default access control list policy, used in the event that
+ { "acl_policy", "ss", do_acl_policy, "aclname allow|deny",
+ "set default access control list policy" },
+STEXI
+@item acl_policy @var{aclname} @code{allow|deny}
+Set the default access control list policy, used in the event that
none of the explicit rules match. The default policy at startup is
-always @code{deny}
-@item acl allow <aclname> <match> [<index>]
-add a match to the access control list, allowing access. The match will
-normally be an exact username or x509 distinguished name, but can
-optionally include wildcard globs. eg @code{*@@EXAMPLE.COM} to allow
-all users in the @code{EXAMPLE.COM} kerberos realm. The match will
-normally be appended to the end of the ACL, but can be inserted
-earlier in the list if the optional @code{index} parameter is supplied.
-@item acl deny <aclname> <match> [<index>]
-add a match to the access control list, denying access. The match will
-normally be an exact username or x509 distinguished name, but can
-optionally include wildcard globs. eg @code{*@@EXAMPLE.COM} to allow
-all users in the @code{EXAMPLE.COM} kerberos realm. The match will
+always @code{deny}.
+ETEXI
+
+ { "acl_add", "sssi?", do_acl_add, "aclname match allow|deny [index]",
+ "add a match rule to the access control list" },
+STEXI
+@item acl_allow @var{aclname} @var{match} @code{allow|deny} [@var{index}]
+Add a match rule to the access control list, allowing or denying access.
+The match will normally be an exact username or x509 distinguished name,
+but can optionally include wildcard globs. eg @code{*@@EXAMPLE.COM} to
+allow all users in the @code{EXAMPLE.COM} kerberos realm. The match will
normally be appended to the end of the ACL, but can be inserted
-earlier in the list if the optional @code{index} parameter is supplied.
-@item acl remove <aclname> <match>
-remove the specified match rule from the access control list.
-@item acl reset <aclname>
-remove all matches from the access control list, and set the default
+earlier in the list if the optional @var{index} parameter is supplied.
+ETEXI
+
+ { "acl_remove", "ss", do_acl_remove, "aclname match",
+ "remove a match rule from the access control list" },
+STEXI
+@item acl_remove @var{aclname} @var{match}
+Remove the specified match rule from the access control list.
+ETEXI
+
+ { "acl_reset", "s", do_acl_reset, "aclname",
+ "reset the access control list" },
+STEXI
+@item acl_remove @var{aclname} @var{match}
+Remove all matches from the access control list, and set the default
policy back to @code{deny}.
-@end table
+ETEXI
+
+#if defined(TARGET_I386)
+ { "mce", "iillll", do_inject_mce, "cpu bank status mcgstatus addr misc", "inject a MCE on the given CPU"},
+#endif
+STEXI
+@item mce @var{cpu} @var{bank} @var{status} @var{mcgstatus} @var{addr} @var{misc}
+Inject an MCE on the given CPU (x86 only).
+ETEXI
+
+ { "getfd", "s", do_getfd, "getfd name",
+ "receive a file descriptor via SCM rights and assign it a name" },
+STEXI
+@item getfd @var{fdname}
+If a file descriptor is passed alongside this command using the SCM_RIGHTS
+mechanism on unix sockets, it is stored using the name @var{fdname} for
+later use by other monitor commands.
+ETEXI
+
+ { "closefd", "s", do_closefd, "closefd name",
+ "close a file descriptor previously passed via SCM rights" },
+STEXI
+@item closefd @var{fdname}
+Close the file descriptor previously assigned to @var{fdname} using the
+@code{getfd} command. This is only needed if the file descriptor was never
+used by another monitor command.
ETEXI
STEXI
projects / qemu / blobdiff