#include "config.h"
#include "eap_peer/eap.h"
#include "wpa_supplicant_i.h"
+#include "driver_i.h"
#include "eloop.h"
#include "uuid.h"
#include "wpa_ctrl.h"
#include "ctrl_iface_dbus.h"
#include "eap_common/eap_wsc_common.h"
#include "blacklist.h"
+#include "wpa.h"
#include "wps_supplicant.h"
+#include "dh_groups.h"
#define WPS_PIN_SCAN_IGNORE_SEL_REG 3
}
+static void wpas_wps_security_workaround(struct wpa_supplicant *wpa_s,
+ struct wpa_ssid *ssid,
+ const struct wps_credential *cred)
+{
+ struct wpa_driver_capa capa;
+ size_t i;
+ struct wpa_scan_res *bss;
+ const u8 *ie;
+ struct wpa_ie_data adv;
+ int wpa2 = 0, ccmp = 0;
+
+ /*
+ * Many existing WPS APs do not know how to negotiate WPA2 or CCMP in
+ * case they are configured for mixed mode operation (WPA+WPA2 and
+ * TKIP+CCMP). Try to use scan results to figure out whether the AP
+ * actually supports stronger security and select that if the client
+ * has support for it, too.
+ */
+
+ if (wpa_drv_get_capa(wpa_s, &capa))
+ return; /* Unknown what driver supports */
+
+ if (wpa_supplicant_get_scan_results(wpa_s) || wpa_s->scan_res == NULL)
+ return; /* Could not get scan results for checking advertised
+ * parameters */
+
+ for (i = 0; i < wpa_s->scan_res->num; i++) {
+ bss = wpa_s->scan_res->res[i];
+ if (os_memcmp(bss->bssid, cred->mac_addr, ETH_ALEN) != 0)
+ continue;
+ ie = wpa_scan_get_ie(bss, WLAN_EID_SSID);
+ if (ie == NULL)
+ continue;
+ if (ie[1] != ssid->ssid_len || ssid->ssid == NULL ||
+ os_memcmp(ie + 2, ssid->ssid, ssid->ssid_len) != 0)
+ continue;
+
+ wpa_printf(MSG_DEBUG, "WPS: AP found from scan results");
+ break;
+ }
+
+ if (i == wpa_s->scan_res->num) {
+ wpa_printf(MSG_DEBUG, "WPS: The AP was not found from scan "
+ "results - use credential as-is");
+ return;
+ }
+
+ ie = wpa_scan_get_ie(bss, WLAN_EID_RSN);
+ if (ie && wpa_parse_wpa_ie(ie, 2 + ie[1], &adv) == 0) {
+ wpa2 = 1;
+ if (adv.pairwise_cipher & WPA_CIPHER_CCMP)
+ ccmp = 1;
+ } else {
+ ie = wpa_scan_get_vendor_ie(bss, WPA_IE_VENDOR_TYPE);
+ if (ie && wpa_parse_wpa_ie(ie, 2 + ie[1], &adv) == 0 &&
+ adv.pairwise_cipher & WPA_CIPHER_CCMP)
+ ccmp = 1;
+ }
+
+ if (ie == NULL && (ssid->proto & WPA_PROTO_WPA) &&
+ (ssid->pairwise_cipher & WPA_CIPHER_TKIP)) {
+ /*
+ * TODO: This could be the initial AP configuration and the
+ * Beacon contents could change shortly. Should request a new
+ * scan and delay addition of the network until the updated
+ * scan results are available.
+ */
+ wpa_printf(MSG_DEBUG, "WPS: The AP did not yet advertise WPA "
+ "support - use credential as-is");
+ return;
+ }
+
+ if (ccmp && !(ssid->pairwise_cipher & WPA_CIPHER_CCMP) &&
+ (ssid->pairwise_cipher & WPA_CIPHER_TKIP) &&
+ (capa.key_mgmt & WPA_DRIVER_CAPA_KEY_MGMT_WPA2_PSK)) {
+ wpa_printf(MSG_DEBUG, "WPS: Add CCMP into the credential "
+ "based on scan results");
+ if (wpa_s->conf->ap_scan == 1)
+ ssid->pairwise_cipher |= WPA_CIPHER_CCMP;
+ else
+ ssid->pairwise_cipher = WPA_CIPHER_CCMP;
+ }
+
+ if (wpa2 && !(ssid->proto & WPA_PROTO_RSN) &&
+ (ssid->proto & WPA_PROTO_WPA) &&
+ (capa.enc & WPA_DRIVER_CAPA_ENC_CCMP)) {
+ wpa_printf(MSG_DEBUG, "WPS: Add WPA2 into the credential "
+ "based on scan results");
+ if (wpa_s->conf->ap_scan == 1)
+ ssid->proto |= WPA_PROTO_RSN;
+ else
+ ssid->proto = WPA_PROTO_RSN;
+ }
+}
+
+
static int wpa_supplicant_wps_cred(void *ctx,
const struct wps_credential *cred)
{
struct wpa_supplicant *wpa_s = ctx;
struct wpa_ssid *ssid = wpa_s->current_ssid;
+ u8 key_idx = 0;
if ((wpa_s->conf->wps_cred_processing == 1 ||
wpa_s->conf->wps_cred_processing == 2) && cred->cred_attr) {
if (wpa_s->conf->wps_cred_processing == 1)
return 0;
+ wpa_hexdump_ascii(MSG_DEBUG, "WPS: SSID", cred->ssid, cred->ssid_len);
+ wpa_printf(MSG_DEBUG, "WPS: Authentication Type 0x%x",
+ cred->auth_type);
+ wpa_printf(MSG_DEBUG, "WPS: Encryption Type 0x%x", cred->encr_type);
+ wpa_printf(MSG_DEBUG, "WPS: Network Key Index %d", cred->key_idx);
+ wpa_hexdump_key(MSG_DEBUG, "WPS: Network Key",
+ cred->key, cred->key_len);
+ wpa_printf(MSG_DEBUG, "WPS: MAC Address " MACSTR,
+ MAC2STR(cred->mac_addr));
+
if (cred->auth_type != WPS_AUTH_OPEN &&
cred->auth_type != WPS_AUTH_SHARED &&
cred->auth_type != WPS_AUTH_WPAPSK &&
case WPS_ENCR_NONE:
break;
case WPS_ENCR_WEP:
- if (cred->key_len > 0 && cred->key_len <= MAX_WEP_KEY_LEN &&
- cred->key_idx < NUM_WEP_KEYS) {
- os_memcpy(ssid->wep_key[cred->key_idx], cred->key,
+ if (cred->key_len <= 0)
+ break;
+ if (cred->key_len != 5 && cred->key_len != 13 &&
+ cred->key_len != 10 && cred->key_len != 26) {
+ wpa_printf(MSG_ERROR, "WPS: Invalid WEP Key length "
+ "%lu", (unsigned long) cred->key_len);
+ return -1;
+ }
+ if (cred->key_idx > NUM_WEP_KEYS) {
+ wpa_printf(MSG_ERROR, "WPS: Invalid WEP Key index %d",
+ cred->key_idx);
+ return -1;
+ }
+ if (cred->key_idx)
+ key_idx = cred->key_idx - 1;
+ if (cred->key_len == 10 || cred->key_len == 26) {
+ if (hexstr2bin((char *) cred->key,
+ ssid->wep_key[key_idx],
+ cred->key_len / 2) < 0) {
+ wpa_printf(MSG_ERROR, "WPS: Invalid WEP Key "
+ "%d", key_idx);
+ return -1;
+ }
+ ssid->wep_key_len[key_idx] = cred->key_len / 2;
+ } else {
+ os_memcpy(ssid->wep_key[key_idx], cred->key,
cred->key_len);
- ssid->wep_key_len[cred->key_idx] = cred->key_len;
- ssid->wep_tx_keyidx = cred->key_idx;
+ ssid->wep_key_len[key_idx] = cred->key_len;
}
+ ssid->wep_tx_keyidx = key_idx;
break;
case WPS_ENCR_TKIP:
ssid->pairwise_cipher = WPA_CIPHER_TKIP;
}
}
+ wpas_wps_security_workaround(wpa_s, ssid, cred);
+
#ifndef CONFIG_NO_CONFIG_WRITE
if (wpa_s->conf->update_config &&
wpa_config_write(wpa_s->confname, wpa_s->conf)) {
const char *pin)
{
struct wpa_ssid *ssid;
- char val[30];
+ char val[128];
unsigned int rpin = 0;
wpas_clear_wps(wpa_s);
}
+#ifdef CONFIG_WPS_OOB
+int wpas_wps_start_oob(struct wpa_supplicant *wpa_s, char *device_type,
+ char *path, char *method, char *name)
+{
+ struct wps_context *wps = wpa_s->wps;
+ struct oob_device_data *oob_dev;
+
+ oob_dev = wps_get_oob_device(device_type);
+ if (oob_dev == NULL)
+ return -1;
+ oob_dev->device_path = path;
+ oob_dev->device_name = name;
+ wps->oob_conf.oob_method = wps_get_oob_method(method);
+
+ if (wps->oob_conf.oob_method == OOB_METHOD_DEV_PWD_E) {
+ /*
+ * Use pre-configured DH keys in order to be able to write the
+ * key hash into the OOB file.
+ */
+ wpabuf_free(wps->dh_pubkey);
+ wpabuf_free(wps->dh_privkey);
+ wps->dh_privkey = NULL;
+ wps->dh_pubkey = dh_init(dh_groups_get(WPS_DH_GROUP),
+ &wps->dh_privkey);
+ wps->dh_pubkey = wpabuf_zeropad(wps->dh_pubkey, 192);
+ if (wps->dh_pubkey == NULL) {
+ wpa_printf(MSG_ERROR, "WPS: Failed to initialize "
+ "Diffie-Hellman handshake");
+ return -1;
+ }
+ }
+
+ if (wps->oob_conf.oob_method == OOB_METHOD_CRED)
+ wpas_clear_wps(wpa_s);
+
+ if (wps_process_oob(wps, oob_dev, 0) < 0)
+ return -1;
+
+ if ((wps->oob_conf.oob_method == OOB_METHOD_DEV_PWD_E ||
+ wps->oob_conf.oob_method == OOB_METHOD_DEV_PWD_R) &&
+ wpas_wps_start_pin(wpa_s, NULL,
+ wpabuf_head(wps->oob_conf.dev_password)) < 0)
+ return -1;
+
+ return 0;
+}
+#endif /* CONFIG_WPS_OOB */
+
+
int wpas_wps_start_reg(struct wpa_supplicant *wpa_s, const u8 *bssid,
const char *pin)
{
return;
wps_registrar_deinit(wpa_s->wps->registrar);
+ wpabuf_free(wpa_s->wps->dh_pubkey);
+ wpabuf_free(wpa_s->wps->dh_privkey);
+ wpabuf_free(wpa_s->wps->oob_conf.pubkey_hash);
+ wpabuf_free(wpa_s->wps->oob_conf.dev_password);
os_free(wpa_s->wps->network_key);
os_free(wpa_s->wps);
wpa_s->wps = NULL;