added vm86.c

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@143 c046a42c-6fe2-441c-8c8c-71466251a162

diff --git a/linux-user/qemu.h b/linux-user/qemu.h
index 300a188..5613c3e 100644 (file)
--- a/linux-user/qemu.h
+++ b/linux-user/qemu.h
@@ -54,6 +54,8 @@ typedef struct TaskState {
     struct TaskState *next;
     struct target_vm86plus_struct *target_v86;
     struct vm86_saved_state vm86_saved_regs;
+    uint32_t v86flags;
+    uint32_t v86mask;
     int used; /* non zero if used */
     uint8_t stack[0];
 } __attribute__((aligned(16))) TaskState;
@@ -73,9 +75,17 @@ void cpu_loop(CPUX86State *env);
 void process_pending_signals(void *cpu_env);
 void signal_init(void);
 int queue_signal(int sig, target_siginfo_t *info);
-void save_v86_state(CPUX86State *env);
 void init_paths(const char *prefix);
 const char *path(const char *pathname);
 
 extern int loglevel;
+extern FILE *logfile;
+
+/* vm86.c */
+void save_v86_state(CPUX86State *env);
+void do_int(CPUX86State *env, int intno);
+void handle_vm86_fault(CPUX86State *env);
+int do_vm86(CPUX86State *env, long subfunction, 
+            struct target_vm86plus_struct * target_v86);
+
 #endif

diff --git a/linux-user/syscall.c b/linux-user/syscall.c
index 3f6084d..38e242b 100644 (file)
--- a/linux-user/syscall.c
+++ b/linux-user/syscall.c
@@ -1058,78 +1058,6 @@ int do_modify_ldt(CPUX86State *env, int func, void *ptr, unsigned long bytecount
     return ret;
 }
 
-/* vm86 emulation */
-
-#define SAFE_MASK  (0xDD5)
-
-int do_vm86(CPUX86State *env, long subfunction, 
-            struct target_vm86plus_struct * target_v86)
-{
-    TaskState *ts = env->opaque;
-    int ret;
-    
-    switch (subfunction) {
-    case TARGET_VM86_REQUEST_IRQ:
-    case TARGET_VM86_FREE_IRQ:
-    case TARGET_VM86_GET_IRQ_BITS:
-    case TARGET_VM86_GET_AND_RESET_IRQ:
-        gemu_log("qemu: unsupported vm86 subfunction (%ld)\n", subfunction);
-        ret = -EINVAL;
-        goto out;
-    case TARGET_VM86_PLUS_INSTALL_CHECK:
-        /* NOTE: on old vm86 stuff this will return the error
-           from verify_area(), because the subfunction is
-           interpreted as (invalid) address to vm86_struct.
-           So the installation check works.
-            */
-        ret = 0;
-        goto out;
-    }
-
-    ts->target_v86 = target_v86;
-    /* save current CPU regs */
-    ts->vm86_saved_regs.eax = 0; /* default vm86 syscall return code */
-    ts->vm86_saved_regs.ebx = env->regs[R_EBX];
-    ts->vm86_saved_regs.ecx = env->regs[R_ECX];
-    ts->vm86_saved_regs.edx = env->regs[R_EDX];
-    ts->vm86_saved_regs.esi = env->regs[R_ESI];
-    ts->vm86_saved_regs.edi = env->regs[R_EDI];
-    ts->vm86_saved_regs.ebp = env->regs[R_EBP];
-    ts->vm86_saved_regs.esp = env->regs[R_ESP];
-    ts->vm86_saved_regs.eflags = env->eflags;
-    ts->vm86_saved_regs.eip  = env->eip;
-    ts->vm86_saved_regs.cs = env->segs[R_CS];
-    ts->vm86_saved_regs.ss = env->segs[R_SS];
-    ts->vm86_saved_regs.ds = env->segs[R_DS];
-    ts->vm86_saved_regs.es = env->segs[R_ES];
-    ts->vm86_saved_regs.fs = env->segs[R_FS];
-    ts->vm86_saved_regs.gs = env->segs[R_GS];
-
-    /* build vm86 CPU state */
-    env->eflags = (env->eflags & ~SAFE_MASK) | 
-        (tswap32(target_v86->regs.eflags) & SAFE_MASK) | VM_MASK;
-
-    env->regs[R_EBX] = tswap32(target_v86->regs.ebx);
-    env->regs[R_ECX] = tswap32(target_v86->regs.ecx);
-    env->regs[R_EDX] = tswap32(target_v86->regs.edx);
-    env->regs[R_ESI] = tswap32(target_v86->regs.esi);
-    env->regs[R_EDI] = tswap32(target_v86->regs.edi);
-    env->regs[R_EBP] = tswap32(target_v86->regs.ebp);
-    env->regs[R_ESP] = tswap32(target_v86->regs.esp);
-    env->eip = tswap32(target_v86->regs.eip);
-    cpu_x86_load_seg(env, R_CS, tswap16(target_v86->regs.cs));
-    cpu_x86_load_seg(env, R_SS, tswap16(target_v86->regs.ss));
-    cpu_x86_load_seg(env, R_DS, tswap16(target_v86->regs.ds));
-    cpu_x86_load_seg(env, R_ES, tswap16(target_v86->regs.es));
-    cpu_x86_load_seg(env, R_FS, tswap16(target_v86->regs.fs));
-    cpu_x86_load_seg(env, R_GS, tswap16(target_v86->regs.gs));
-    ret = tswap32(target_v86->regs.eax); /* eax will be restored at
-                                            the end of the syscall */
-    /* now the virtual CPU is ready for vm86 execution ! */
- out:
-    return ret;
-}
-
 /* this stack is the equivalent of the kernel stack associated with a
    thread/process */
 #define NEW_STACK_SIZE 8192