Border stippling (dashing) in pixels
+ 1mtemplateN0m
+ Define a template for later use inside TEXT segments. Substitute
+ N by a digit between 0 and 9, inclusively. The value of the
+ variable is being inserted into the stuff below TEXT at the cor‐
+ responding position, but before some substitutions are applied:
+
+ ’\n’ -> newline
+ ’\\’ -> backslash
+ ’\ ’ -> space
+ ’\N’ -> template argument N
+
+
1mtotal_run_times0m
- Total number of times for Conky to update before quitting. Zero
+ Total number of times for Conky to update before quitting. Zero
makes Conky run forever
1muse_spacer0m
Adds spaces around certain objects to stop them from moving oth‐
er things around. Arguments are left, right, and none (default).
- The old true/false values are deprecated and default to
- right/none respectively. Note that this only helps if you are
+ The old true/false values are deprecated and default to
+ right/none respectively. Note that this only helps if you are
using a mono font, such as Bitstream Vera Sans Mono.
1mVARIABLES0m
- Colors are parsed using XParsecolor(), there might be a list of them:
- /usr/share/X11/rgb.txt. Also, ⟨http://sedition.com/perl/rgb.html⟩.
+ Colors are parsed using XParsecolor(), there might be a list of them:
+ /usr/share/X11/rgb.txt. Also, ⟨http://sedition.com/perl/rgb.html⟩.
Color can be also in #rrggbb format (hex).
1maddr interface0m
- IP address for an interface, or "No Address" if no address is
+ IP address for an interface, or "No Address" if no address is
assigned.
1maddrs interface0m
- IP addresses for an interface (if one - works like addr). Linux
+ IP addresses for an interface (if one - works like addr). Linux
only.
1mapm_battery_time0m
- Display remaining APM battery life in hh:mm:ss or "unknown" if
+ Display remaining APM battery life in hh:mm:ss or "unknown" if
AC adapterstatus is on-line or charging (FreeBSD only)
1mbattery (num)0m
- Battery status and remaining percentage capacity of ACPI or APM
- battery. ACPI battery number can be given as argument (default
+ Battery status and remaining percentage capacity of ACPI or APM
+ battery. ACPI battery number can be given as argument (default
is BAT0).
1mbattery_time (num)0m
- Battery charge/discharge time remaining of ACPI battery. ACPI
+ Battery charge/discharge time remaining of ACPI battery. ACPI
battery number can be given as argument (default is BAT0).
Change drawing color to color
- 1mcolorN 22mChange drawing color to colorN configuration option, where N is
+ 1mcolorN 22mChange drawing color to colorN configuration option, where N is
a digit between 0 and 9, inclusively.
1mcpu (cpuN)0m
- CPU usage in percents. For SMP machines, the CPU number can be
- provided as an argument. ${cpu cpu0} is the total usage, and
+ CPU usage in percents. For SMP machines, the CPU number can be
+ provided as an argument. ${cpu cpu0} is the total usage, and
${cpu cpuX} (X >= 1) are individual CPUs.
1mcpubar (cpu number) (height),(width)0m
- Bar that shows CPU usage, height is bar’s height in pixels. See
+ Bar that shows CPU usage, height is bar’s height in pixels. See
$cpu for more info on SMP.
- 1mcpugraph normal|log (cpu number) (height),(width) (gradient colour 1)0m
+ 1mcpugraph normal|log (cpu number) (height),(width) (gradient colour 1)0m
1m(gradient colour 2)0m
- CPU usage graph, with optional colours in hex, minus the #. See
- $cpu for more info on SMP. Uses a logarithmic scale (to see
+ CPU usage graph, with optional colours in hex, minus the #. See
+ $cpu for more info on SMP. Uses a logarithmic scale (to see
small numbers) when you use "log" instead of "normal".
of sda for /dev/sda. Individual partitions are allowed.
- 1mdiskiograph normal|log (device) (height),(width) (gradient colour 1)0m
+ 1mdiskiograph normal|log (device) (height),(width) (gradient colour 1)0m
1m(gradient colour 2) (scale)0m
- Disk IO graph, colours defined in hex, minus the #. If scale is
+ Disk IO graph, colours defined in hex, minus the #. If scale is
non-zero, it becomes the scale for the graph. Uses a logarithmic
scale (to see small numbers) when you use "log" instead of "nor‐
mal".
Displays current disk IO for reads. Device as in diskio.
- 1mdiskiograph_read normal|log (device) (height),(width) (gradient colour0m
+ 1mdiskiograph_read normal|log (device) (height),(width) (gradient colour0m
1m1) (gradient colour 2) (scale)0m
Disk IO graph for reads, colours defined in hex, minus the #. If
scale is non-zero, it becomes the scale for the graph. Device as
- in diskio. Uses a logarithmic scale (to see small numbers) when
+ in diskio. Uses a logarithmic scale (to see small numbers) when
you use "log" instead of "normal".
1mdiskiograph_write normal|log (device) (height),(width) (gradient colour0m
1m1) (gradient colour 2) (scale)0m
- Disk IO graph for writes, colours defined in hex, minus the #.
+ Disk IO graph for writes, colours defined in hex, minus the #.
If scale is non-zero, it becomes the scale for the graph. Device
- as in diskio. Uses a logarithmic scale (to see small numbers)
+ as in diskio. Uses a logarithmic scale (to see small numbers)
when you use "log" instead of "normal".
Download speed in KiB with one decimal
- 1mdownspeedgraph normal|log net (height),(width) (gradient colour 1)0m
+ 1mdownspeedgraph normal|log net (height),(width) (gradient colour 1)0m
1m(gradient colour 2) (scale)0m
- Download speed graph, colours defined in hex, minus the #. If
- scale is non-zero, it becomes the scale for the graph. Uses a
- logarithmic scale (to see small numbers) when you use "log" in‐
+ Download speed graph, colours defined in hex, minus the #. If
+ scale is non-zero, it becomes the scale for the graph. Uses a
+ logarithmic scale (to see small numbers) when you use "log" in‐
stead of "normal".
1mexec command0m
Executes a shell command and displays the output in conky. warn‐
- ing: this takes a lot more resources than other variables. I’d
+ ing: this takes a lot more resources than other variables. I’d
recommend coding wanted behaviour in C and posting a patch.
1mexecbar command0m
- Same as exec, except if the first value return is a value be‐
+ Same as exec, except if the first value return is a value be‐
tween 0-100, it will use that number for a bar. The size for the
bar is currently fixed, but that may change in the future.
1mexecgraph (normal|log) command0m
Same as execbar, but graphs values. Uses a logaritmic scale when
- the log option is given (to see small numbers). Values still
+ the log option is given (to see small numbers). Values still
have to be between 0 and 100.
1mexeci interval command0m
- Same as exec but with specific interval. Interval can’t be less
+ Same as exec but with specific interval. Interval can’t be less
than update_interval in configuration. See also $texeci
1mexecp command0m
Executes a shell command and displays the output in conky. warn‐
- ing: this takes a lot more resources than other variables. I’d
+ ing: this takes a lot more resources than other variables. I’d
recommend coding wanted behaviour in C and posting a patch. This
- differs from $exec in that it parses the output of the command,
- so you can insert things like ${color red}hi!${color} in your
- script and have it correctly parsed by Conky. Caveats: Conky
- parses and evaluates the output of $execp every time Conky
+ differs from $exec in that it parses the output of the command,
+ so you can insert things like ${color red}hi!${color} in your
+ script and have it correctly parsed by Conky. Caveats: Conky
+ parses and evaluates the output of $execp every time Conky
loops, and then destroys all the objects. If you try to use any‐
- thing like $execi within an $execp statement, it will function‐
+ thing like $execi within an $execp statement, it will function‐
ally run at the same interval that the $execp statement runs, as
it is created and destroyed at every interval.
1mexecpi interval command0m
Same as execp but with specific interval. Interval can’t be less
than update_interval in configuration. Note that the output from
- the $execpi command is still parsed and evaluated at every in‐
+ the $execpi command is still parsed and evaluated at every in‐
terval.
1mfont (font)0m
- Specify a different font. This new font will apply to the cur‐
- rent line and everything following. You can use a $font with no
- arguments to change back to the default font (much like with
+ Specify a different font. This new font will apply to the cur‐
+ rent line and everything following. You can use a $font with no
+ arguments to change back to the default font (much like with
$color)
1mfreq (n)0m
- Returns CPU #n’s frequency in MHz. CPUs are counted from 1. If
+ Returns CPU #n’s frequency in MHz. CPUs are counted from 1. If
omitted, the parameter defaults to 1.
1mfreq_g (n)0m
- Returns CPU #n’s frequency in GHz. CPUs are counted from 1. If
+ Returns CPU #n’s frequency in GHz. CPUs are counted from 1. If
omitted, the parameter defaults to 1.
1mfreq_dyn (n)0m
Returns CPU #n’s frequency in MHz (defaults to 1), but is calcu‐
- lated by counting to clock cycles to complete an instruction.
+ lated by counting to clock cycles to complete an instruction.
Only available for x86/amd64.
1mfreq_dyn_g (n)0m
Returns CPU #n’s frequency in GHz (defaults to 1), but is calcu‐
- lated by counting to clock cycles to complete an instruction.
+ lated by counting to clock cycles to complete an instruction.
Only available for x86/amd64.
1mfs_bar (height),(width) fs0m
- Bar that shows how much space is used on a file system. height
+ Bar that shows how much space is used on a file system. height
is the height in pixels. fs is any file on that file system.
1mgw_iface0m
- Displays the default route’s interface or "multiple"/"none" ac‐
+ Displays the default route’s interface or "multiple"/"none" ac‐
cordingly.
- 1mgw_ip 22mDisplays the default gateway’s IP or "multiple"/"none" accord‐
+ 1mgw_ip 22mDisplays the default gateway’s IP or "multiple"/"none" accord‐
ingly.
1mhddtemp dev, (host,(port))0m
- Displays temperature of a selected hard disk drive as reported
- by the hddtemp daemon running on host:port. Default host is
+ Displays temperature of a selected hard disk drive as reported
+ by the hddtemp daemon running on host:port. Default host is
127.0.0.1, default port is 7634.
1mhead logfile lines (interval)0m
- Displays first N lines of supplied text text file. If interval
- is not supplied, Conky assumes 2x Conky’s interval. Max of 30
+ Displays first N lines of supplied text text file. If interval
+ is not supplied, Conky assumes 2x Conky’s interval. Max of 30
lines can be displayed, or until the text buffer is filled.
1mhwmon (dev) type n0m
- Hwmon sensor from sysfs (Linux 2.6). Parameter dev may be omit‐
- ted if you have only one hwmon device. Parameter type is either
- ’in’ or ’vol’ meaning voltage; ’fan’ meaning fan; ’temp’ (Cel‐
- sius) or ’tempf’ (Fahrenheit) meaning temperature. Parameter n
- is number of the sensor. See /sys/class/hwmon/ on your local
+ Hwmon sensor from sysfs (Linux 2.6). Parameter dev may be omit‐
+ ted if you have only one hwmon device. Parameter type is either
+ ’in’ or ’vol’ meaning voltage; ’fan’ meaning fan; ’temp’ (Cel‐
+ sius) or ’tempf’ (Fahrenheit) meaning temperature. Parameter n
+ is number of the sensor. See /sys/class/hwmon/ on your local
computer.
1miconv_start codeset_from codeset_to0m
- Convert text from one codeset to another using GNU iconv. Needs
+ Convert text from one codeset to another using GNU iconv. Needs
to be stopped with iconv_stop.
1mi2c (dev) type n0m
- I2C sensor from sysfs (Linux 2.6). Parameter dev may be omitted
- if you have only one I2C device. Parameter type is either ’in’
+ I2C sensor from sysfs (Linux 2.6). Parameter dev may be omitted
+ if you have only one I2C device. Parameter type is either ’in’
or ’vol’ meaning voltage; ’fan’ meaning fan; ’temp’ (Celsius) or
- ’tempf’ (Fahrenheit) meaning temperature. Parameter n is number
+ ’tempf’ (Fahrenheit) meaning temperature. Parameter n is number
of the sensor. See /sys/bus/i2c/devices/ on your local computer.
1mi8k_ac_status0m
- If running the i8k kernel driver for Inspiron laptops, displays
- whether ac power is on, as listed in /proc/i8k (translated to
- human-readable). Beware that this is by default not enabled by
+ If running the i8k kernel driver for Inspiron laptops, displays
+ whether ac power is on, as listed in /proc/i8k (translated to
+ human-readable). Beware that this is by default not enabled by
i8k itself.
1mi8k_bios0m
- If running the i8k kernel driver for Inspiron laptops, displays
+ If running the i8k kernel driver for Inspiron laptops, displays
the bios version as listed in /proc/i8k.
1mi8k_buttons_status0m
- If running the i8k kernel driver for Inspiron laptops, displays
+ If running the i8k kernel driver for Inspiron laptops, displays
the volume buttons status as listed in /proc/i8k.
1mi8k_cpu_temp0m
- If running the i8k kernel driver for Inspiron laptops, displays
+ If running the i8k kernel driver for Inspiron laptops, displays
the cpu temperature in Celsius, as reported by /proc/i8k.
1mi8k_cpu_tempf0m
- If running the i8k kernel driver for Inspiron laptops, displays
+ If running the i8k kernel driver for Inspiron laptops, displays
the cpu temperature in Fahrenheit, as reported by /proc/i8k.
1mi8k_left_fan_rpm0m
- If running the i8k kernel driver for Inspiron laptops, displays
- the left fan’s rate of rotation, in revolutions per minute as
+ If running the i8k kernel driver for Inspiron laptops, displays
+ the left fan’s rate of rotation, in revolutions per minute as
listed in /proc/i8k. Beware, some laptops i8k reports these fans
in reverse order.
1mi8k_left_fan_status0m
- If running the i8k kernel driver for Inspiron laptops, displays
+ If running the i8k kernel driver for Inspiron laptops, displays
the left fan status as listed in /proc/i8k (translated to human-
- readable). Beware, some laptops i8k reports these fans in re‐
+ readable). Beware, some laptops i8k reports these fans in re‐
verse order.
1mi8k_right_fan_rpm0m
- If running the i8k kernel driver for Inspiron laptops, displays
- the right fan’s rate of rotation, in revolutions per minute as
+ If running the i8k kernel driver for Inspiron laptops, displays
+ the right fan’s rate of rotation, in revolutions per minute as
listed in /proc/i8k. Beware, some laptops i8k reports these fans
in reverse order.
1mi8k_right_fan_status0m
- If running the i8k kernel driver for Inspiron laptops, displays
- the right fan status as listed in /proc/i8k (translated to hu‐
- man-readable). Beware, some laptops i8k reports these fans in
+ If running the i8k kernel driver for Inspiron laptops, displays
+ the right fan status as listed in /proc/i8k (translated to hu‐
+ man-readable). Beware, some laptops i8k reports these fans in
reverse order.
1mi8k_serial0m
- If running the i8k kernel driver for Inspiron laptops, displays
+ If running the i8k kernel driver for Inspiron laptops, displays
your laptop serial number as listed in /proc/i8k.
1mi8k_version0m
- If running the i8k kernel driver for Inspiron laptops, displays
+ If running the i8k kernel driver for Inspiron laptops, displays
the version formatting of /proc/i8k.
1mibm_temps N0m
- If running the IBM ACPI, displays the temperatures from the IBM
+ If running the IBM ACPI, displays the temperatures from the IBM
temperature sensors (N=0..7) Sensor 0 is on the CPU, 3 is on the
GPU.
1mibm_volume0m
- If running the IBM ACPI, displays the "master" volume, con‐
+ If running the IBM ACPI, displays the "master" volume, con‐
trolled by the volume keys (0-14).
1mif_empty (var)0m
- if conky variable VAR is empty, display everything between
+ if conky variable VAR is empty, display everything between
$if_empty and the matching $endif
1mif_running (process)0m
- if PROCESS is running, display everything $if_running and the
+ if PROCESS is running, display everything $if_running and the
matching $endif
1mif_existing file (string)0m
- if FILE exists, display everything between if_existing and the
- matching $endif. The optional second paramater checks for FILE
- containing the specified string and prints everything between
+ if FILE exists, display everything between if_existing and the
+ matching $endif. The optional second paramater checks for FILE
+ containing the specified string and prints everything between
$if_existing and the matching $endif.
1mif_smapi_bat_installed (INDEX)0m
- when using smapi, if the battery with index INDEX is installed,
- display everything between $if_smapi_bat_installed and the
+ when using smapi, if the battery with index INDEX is installed,
+ display everything between $if_smapi_bat_installed and the
matching $endif
1mimap_messages (args)0m
Displays the number of messages in your global IMAP inbox by de‐
- fault. You can define individual IMAP inboxes seperately by
+ fault. You can define individual IMAP inboxes seperately by
passing arguments to this object. Arguments are: "host user pass
[-i interval] [-p port] [-e command] [-r retries]". Default port
is 143, default interval is 5 minutes, and default number of re‐
1mioscheduler disk0m
- Prints the current ioscheduler used for the given disk name
+ Prints the current ioscheduler used for the given disk name
(i.e. e.g. "hda" or "sdb")
5 minutes and 3 for past 15 minutes.
- 1mloadgraph normal|log (height),(width) (gradient colour 1) (gradient0m
+ 1mloadgraph normal|log (height),(width) (gradient colour 1) (gradient0m
1mcolour 2)0m
- Load1 average graph, similar to xload, with optional colours in
- hex, minus the #. Uses a logarithmic scale (to see small num‐
+ Load1 average graph, similar to xload, with optional colours in
+ hex, minus the #. Uses a logarithmic scale (to see small num‐
bers) when you use "log" instead of "normal".
1mmails (mailbox) (interval)0m
- Mail count in the specified mailbox or your mail spool if not.
- Both mbox and maildir type mailboxes are supported. You can use
- a program like fetchmail to get mails from some server using
+ Mail count in the specified mailbox or your mail spool if not.
+ Both mbox and maildir type mailboxes are supported. You can use
+ a program like fetchmail to get mails from some server using
your favourite protocol. See also new_mails.
1mmboxscan (-n number of messages to print) (-fw from width) (-sw subject0m
1mwidth) mbox0m
- Print a summary of recent messages in an mbox format mailbox.
- mbox parameter is the filename of the mailbox (can be encapsu‐
+ Print a summary of recent messages in an mbox format mailbox.
+ mbox parameter is the filename of the mailbox (can be encapsu‐
lated using ’"’, ie. ${mboxscan -n 10 "/home/brenden/some box"}
Bar that shows amount of memory in use
- 1mmemgraph normal|log (height),(width) (gradient colour 1) (gradient0m
+ 1mmemgraph normal|log (height),(width) (gradient colour 1) (gradient0m
1mcolour 2)0m
- Memory usage graph. Uses a logarithmic scale (to see small num‐
+ Memory usage graph. Uses a logarithmic scale (to see small num‐
bers) when you use "log" instead of "normal".
1mmemeasyfree0m
- Amount of free memory including the memory that is very easily
+ Amount of free memory including the memory that is very easily
freed (buffers/cache)
1mmixer (device)0m
- Prints the mixer value as reported by the OS. Default mixer is
- "vol", but you can specify one of the following optional argu‐
+ Prints the mixer value as reported by the OS. Default mixer is
+ "vol", but you can specify one of the following optional argu‐
ments: "vol", "bass", "treble", "synth", "pcm", "speaker",
- "line", "mic", "cd", "mix", "pcm2", "rec", "igain", "ogain",
+ "line", "mic", "cd", "mix", "pcm2", "rec", "igain", "ogain",
"line1", "line2", "line3", "dig1", "dig2", "dig3", "phin",
"phout", "video", "radio", "monitor". Refer to the definition of
- SOUND_DEVICE_NAMES in <linux/soundcard.h> (on Linux), <sound‐
+ SOUND_DEVICE_NAMES in <linux/soundcard.h> (on Linux), <sound‐
card.h> (on OpenBSD), or <sys/soundcard.h> to find the exact op‐
tions available on your system.
1mmixerbar (device)0m
- Displays mixer value in a bar as reported by the OS. See docs
+ Displays mixer value in a bar as reported by the OS. See docs
for $mixer for details on arguments.
1mmixerr (device)0m
- Prints the right channel mixer value as reported by the OS. See
+ Prints the right channel mixer value as reported by the OS. See
docs for $mixer for details on arguments.
1mmixerrbar (device)0m
- Displays the right channel mixer value in a bar as reported by
+ Displays the right channel mixer value in a bar as reported by
the OS. See docs for $mixer for details on arguments.
1mmixerl (device)0m
- Prints the left channel mixer value as reported by the OS. See
+ Prints the left channel mixer value as reported by the OS. See
docs for $mixer for details on arguments.
1mmixerlbar (device)0m
- Displays the left channel mixer value in a bar as reported by
+ Displays the left channel mixer value in a bar as reported by
the OS. See docs for $mixer for details on arguments.
1mif_mpd_playing0m
- if mpd is playing or paused, display everything between
+ if mpd is playing or paused, display everything between
$if_mpd_playing and the matching $endif
1mnameserver (index)0m
- Print a nameserver from /etc/resolv.conf. Index starts at and
+ Print a nameserver from /etc/resolv.conf. Index starts at and
defaults to 0.
1mnvidia threshold temp gpufreq memfreq imagequality0m
- Nvidia graficcard support for the XNVCtrl library. Each option
- can be shortened to the least significant part. Temperatures
+ Nvidia graficcard support for the XNVCtrl library. Each option
+ can be shortened to the least significant part. Temperatures
are printed as float, all other values as integer.
1mthreshold22m: the thresholdtemperature at which the gpu slows down
1mpb_battery item0m
If running on Apple powerbook/ibook, display information on bat‐
- tery status. The item parameter specifies, what information to
+ tery status. The item parameter specifies, what information to
display. Exactly one item must be specified. Valid items are:
1mstatus22m: Display if battery is fully charged, charging, discharg‐
ing or absent (running on AC)
- 1mpercent22m: Display charge of battery in percent, if charging or
- discharging. Nothing will be displayed, if battery is fully
+ 1mpercent22m: Display charge of battery in percent, if charging or
+ discharging. Nothing will be displayed, if battery is fully
charged or absent.
1mtime22m: Display the time remaining until the battery will be fully
- charged or discharged at current rate. Nothing is displayed, if
- battery is absent or if it’s present but fully charged and not
+ charged or discharged at current rate. Nothing is displayed, if
+ battery is absent or if it’s present but fully charged and not
discharging.
1mplatform (dev) type n0m
- Platform sensor from sysfs (Linux 2.6). Parameter dev may be
- omitted if you have only one platform device. Platform type is
- either ’in’ or ’vol’ meaning voltage; ’fan’ meaning fan; ’temp’
+ Platform sensor from sysfs (Linux 2.6). Parameter dev may be
+ omitted if you have only one platform device. Platform type is
+ either ’in’ or ’vol’ meaning voltage; ’fan’ meaning fan; ’temp’
(Celsius) or ’tempf’ (Fahrenheit) meaning temperature. Parameter
- n is number of the sensor. See /sys/bus/platform/devices/ on
+ n is number of the sensor. See /sys/bus/platform/devices/ on
your local computer.
1mpop3_used (args)0m
- Displays the amount of space (in MiB, 2^20) used in your global
- POP3 inbox by default. You can define individual POP3 inboxes
- seperately by passing arguments to this object. Arguments are:
- "host user pass [-i interval] [-p port] [-e command] [-r re‐
+ Displays the amount of space (in MiB, 2^20) used in your global
+ POP3 inbox by default. You can define individual POP3 inboxes
+ seperately by passing arguments to this object. Arguments are:
+ "host user pass [-i interval] [-p port] [-e command] [-r re‐
tries]". Default port is 110, default interval is 5 minutes, and
default number of retries before giving up is 5. If the password
- is supplied as ’*’, you will be prompted to enter the password
+ is supplied as ’*’, you will be prompted to enter the password
when Conky starts.
1mscroll length (step) text0m
- Scroll ’text’ by ’step’ characters showing ’length’ number of
- characters at the same time. The text may also contain vari‐
+ Scroll ’text’ by ’step’ characters showing ’length’ number of
+ characters at the same time. The text may also contain vari‐
ables. ’step’ is optional and defaults to 1 if not set. If a var
- creates output on multiple lines then the lines are placed be‐
- hind each other separated with a ’|’-sign. Do NOT use vars that
- change colors or otherwise affect the design inside a scrolling
- text. If you want spaces between the start and the end of
- ’text’, place them at the end of ’text’ not at the front ("foo‐
+ creates output on multiple lines then the lines are placed be‐
+ hind each other separated with a ’|’-sign. Do NOT use vars that
+ change colors or otherwise affect the design inside a scrolling
+ text. If you want spaces between the start and the end of
+ ’text’, place them at the end of ’text’ not at the front ("foo‐
bar" and " foobar" can both generate "barfoo" but "foobar " will
keep the spaces like this "bar foo").
1msmapi (ARGS)0m
- when using smapi, display contents of the /sys/devices/plat‐
- form/smapi directory. ARGS are either ’(FILENAME)’ or ’bat (IN‐
- DEX) (FILENAME)’ to display the corresponding files’ content.
- This is a very raw method of accessing the smapi values. When
+ when using smapi, display contents of the /sys/devices/plat‐
+ form/smapi directory. ARGS are either ’(FILENAME)’ or ’bat (IN‐
+ DEX) (FILENAME)’ to display the corresponding files’ content.
+ This is a very raw method of accessing the smapi values. When
available, better use one of the smapi_* variables instead.
1msmapi_bat_bar (INDEX),(height),(width)0m
- when using smapi, display the remaining capacity of the battery
+ when using smapi, display the remaining capacity of the battery
with index INDEX as a bar.
1msmapi_bat_perc (INDEX)0m
- when using smapi, display the remaining capacity in percent of
- the battery with index INDEX. This is a separate variable be‐
+ when using smapi, display the remaining capacity in percent of
+ the battery with index INDEX. This is a separate variable be‐
cause it supports the ’use_spacer’ configuration option.
1msmapi_bat_power INDEX0m
- when using smapi, display the current power of the battery with
- index INDEX in watt. This is a separate variable because the
- original read out value is being converted from mW. The sign of
- the output reflects charging (positive) or discharging (nega‐
+ when using smapi, display the current power of the battery with
+ index INDEX in watt. This is a separate variable because the
+ original read out value is being converted from mW. The sign of
+ the output reflects charging (positive) or discharging (nega‐
tive) state.
1msmapi_bat_temp INDEX0m
when using smapi, display the current temperature of the battery
- with index INDEX in degree Celsius. This is a separate variable
+ with index INDEX in degree Celsius. This is a separate variable
because the original read out value is being converted from mil‐
li degree Celsius.
The connection index provides you with access to each connection
in the port monitor. The monitor will return information for in‐
dex values from 0 to n-1 connections. Values higher than n-1 are
- simply ignored. For the "count" item, the connection index must
+ simply ignored. For the "count" item, the connection index must
be omitted. It is required for all other items.
Examples:
- 1m${tcp_portmon 6881 6999 count} 22m- displays the number of connec‐
+ 1m${tcp_portmon 6881 6999 count} 22m- displays the number of connec‐
tions in the bittorrent port range
- 1m${tcp_portmon 22 22 rip 0} 22m- displays the remote host ip of the
+ 1m${tcp_portmon 22 22 rip 0} 22m- displays the remote host ip of the
first sshd connection
- 1m${tcp_portmon 22 22 rip 9} 22m- displays the remote host ip of the
+ 1m${tcp_portmon 22 22 rip 9} 22m- displays the remote host ip of the
tenth sshd connection
1m${tcp_portmon 1 1024 rhost 0} 22m- displays the remote host name of
the first connection on a privileged port
1m${tcp_portmon 1 1024 rport 4} 22m- displays the remote host port of
the fifth connection on a privileged port
- 1m${tcp_portmon 1 65535 lservice 14} 22m- displays the local service
+ 1m${tcp_portmon 1 65535 lservice 14} 22m- displays the local service
name of the fifteenth connection in the range of all ports
Note that port monitor variables which share the same port range
actually refer to the same monitor, so many references to a sin‐
gle port range for different items and different indexes all use
- the same monitor internally. In other words, the program avoids
+ the same monitor internally. In other words, the program avoids
creating redundant monitors.
1mtexeci interval command0m
- Runs a command at an interval inside a thread and displays the
- output. Same as $execi, except the command is run inside a
- thread. Use this if you have a slow script to keep Conky updat‐
- ing. You should make the interval slightly longer then the time
- it takes your script to execute. For example, if you have a
- script that take 5 seconds to execute, you should make the in‐
+ Runs a command at an interval inside a thread and displays the
+ output. Same as $execi, except the command is run inside a
+ thread. Use this if you have a slow script to keep Conky updat‐
+ ing. You should make the interval slightly longer then the time
+ it takes your script to execute. For example, if you have a
+ script that take 5 seconds to execute, you should make the in‐
terval at least 6 seconds. See also $execi.
1mrss url delay_in_minutes action item_num0m
- Download and parse RSS feeds. Action may be one of the follow‐
- ing: feed_title, item_title (with num par), item_desc (with num
+ Download and parse RSS feeds. Action may be one of the follow‐
+ ing: feed_title, item_title (with num par), item_desc (with num
par) and item_titles.
can be displayed, or until the text buffer is filled.
+ 1mtemplateN (arg1) (arg2) (arg3 ...)0m
+ Evaluate the content of the templateN configuration variable
+ (where N is a value between 0 and 9, inclusively), applying sub‐
+ stitutions as described in the documentation of the correspond‐
+ ing configuration variable. The number of arguments is option‐
+ al, but must match the highest referred index in the template.
+ You can use the same special sequences in each argument as the
+ ones valid for a template definition, e.g. to allow an argument
+ to contain a whitespace. Also simple nesting of templates is
+ possible this way.
+
+ Here are some examples of template definitions:
+
+ template0 $\1\2
+ template1 \1: ${fs_used \2} / ${fs_size \2}
+ template2 \1 \2
+
+ The following list shows sample usage of the templates defined
+ above, with the equivalent syntax when not using any template at
+ all:
+
+ using template same without template
+ ─────────────────────────────────────────────────────────────────────────────────
+ ${template0 node name} $nodename
+ ${template1 root /} root: ${fs_free /} /
+ ${fs_size /}
+ ${template1 ${template2\ disk\ root} /} disk root: ${fs_free /} / ${fs_size /}
+
+
1mtime (format)0m
Local time, see man strftime to get more information about for‐
mat
projects / monky / commitdiff