From: Yoichi Yuasa Date: Fri, 11 Jul 2008 13:45:21 +0000 (+0900) Subject: [MIPS] cmbvr4133: Remove support X-Git-Url: http://git.maemo.org/git/?a=commitdiff_plain;h=efff4ae259b8f750ea426d3084007f85c0a15a85;p=h-e-n [MIPS] cmbvr4133: Remove support It cannot be built for a long time and nobody maintains it. Signed-off-by: Yoichi Yuasa Signed-off-by: Ralf Baechle --- diff --git a/arch/mips/Makefile b/arch/mips/Makefile index d319cd6..c4a3098 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -355,12 +355,6 @@ core-$(CONFIG_MACH_VR41XX) += arch/mips/vr41xx/common/ cflags-$(CONFIG_MACH_VR41XX) += -Iinclude/asm-mips/mach-vr41xx # -# NEC VR4133 -# -core-$(CONFIG_NEC_CMBVR4133) += arch/mips/vr41xx/nec-cmbvr4133/ -load-$(CONFIG_NEC_CMBVR4133) += 0xffffffff80100000 - -# # ZAO Networks Capcella (VR4131) # load-$(CONFIG_ZAO_CAPCELLA) += 0xffffffff80000000 diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index 875b643..57e34ca 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -13,7 +13,6 @@ obj-$(CONFIG_MIPS_MSC) += ops-msc.o obj-$(CONFIG_MIPS_NILE4) += ops-nile4.o obj-$(CONFIG_SOC_TX3927) += ops-tx3927.o obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o -obj-$(CONFIG_NEC_CMBVR4133) += fixup-vr4133.o obj-$(CONFIG_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o diff --git a/arch/mips/pci/fixup-vr4133.c b/arch/mips/pci/fixup-vr4133.c deleted file mode 100644 index 34e651b..0000000 --- a/arch/mips/pci/fixup-vr4133.c +++ /dev/null @@ -1,194 +0,0 @@ -/* - * arch/mips/pci/fixup-vr4133.c - * - * The NEC CMB-VR4133 Board specific PCI fixups. - * - * Author: Yoichi Yuasa and - * Alex Sapkov - * - * 2003-2004 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Modified for support in 2.6 - * Author: Manish Lachwani (mlachwani@mvista.com) - * - */ -#include -#include -#include - -#include -#include -#include - -extern int vr4133_rockhopper; -extern void ali_m1535plus_init(struct pci_dev *dev); -extern void ali_m5229_init(struct pci_dev *dev); - -/* Do platform specific device initialization at pci_enable_device() time */ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - /* - * We have to reset AMD PCnet adapter on Rockhopper since - * PMON leaves it enabled and generating interrupts. This leads - * to a lock if some PCI device driver later enables the IRQ line - * shared with PCnet and there is no AMD PCnet driver to catch its - * interrupts. - */ -#ifdef CONFIG_ROCKHOPPER - if (dev->vendor == PCI_VENDOR_ID_AMD && - dev->device == PCI_DEVICE_ID_AMD_LANCE) { - inl(pci_resource_start(dev, 0) + 0x18); - } -#endif - - /* - * we have to open the bridges' windows down to 0 because otherwise - * we cannot access ISA south bridge I/O registers that get mapped from - * 0. for example, 8259 PIC would be unaccessible without that - */ - if(dev->vendor == PCI_VENDOR_ID_INTEL && dev->device == PCI_DEVICE_ID_INTEL_S21152BB) { - pci_write_config_byte(dev, PCI_IO_BASE, 0); - if(dev->bus->number == 0) { - pci_write_config_word(dev, PCI_IO_BASE_UPPER16, 0); - } else { - pci_write_config_word(dev, PCI_IO_BASE_UPPER16, 1); - } - } - - return 0; -} - -/* - * M1535 IRQ mapping - * Feel free to change this, although it shouldn't be needed - */ -#define M1535_IRQ_INTA 7 -#define M1535_IRQ_INTB 9 -#define M1535_IRQ_INTC 10 -#define M1535_IRQ_INTD 11 - -#define M1535_IRQ_USB 9 -#define M1535_IRQ_IDE 14 -#define M1535_IRQ_IDE2 15 -#define M1535_IRQ_PS2 12 -#define M1535_IRQ_RTC 8 -#define M1535_IRQ_FDC 6 -#define M1535_IRQ_AUDIO 5 -#define M1535_IRQ_COM1 4 -#define M1535_IRQ_COM2 4 -#define M1535_IRQ_IRDA 3 -#define M1535_IRQ_KBD 1 -#define M1535_IRQ_TMR 0 - -/* Rockhopper "slots" assignment; this is hard-coded ... */ -#define ROCKHOPPER_M5451_SLOT 1 -#define ROCKHOPPER_M1535_SLOT 2 -#define ROCKHOPPER_M5229_SLOT 11 -#define ROCKHOPPER_M5237_SLOT 15 -#define ROCKHOPPER_PMU_SLOT 12 -/* ... and hard-wired. */ -#define ROCKHOPPER_PCI1_SLOT 3 -#define ROCKHOPPER_PCI2_SLOT 4 -#define ROCKHOPPER_PCI3_SLOT 5 -#define ROCKHOPPER_PCI4_SLOT 6 -#define ROCKHOPPER_PCNET_SLOT 1 - -#define M1535_IRQ_MASK(n) (1 << (n)) - -#define M1535_IRQ_EDGE (M1535_IRQ_MASK(M1535_IRQ_TMR) | \ - M1535_IRQ_MASK(M1535_IRQ_KBD) | \ - M1535_IRQ_MASK(M1535_IRQ_COM1) | \ - M1535_IRQ_MASK(M1535_IRQ_COM2) | \ - M1535_IRQ_MASK(M1535_IRQ_IRDA) | \ - M1535_IRQ_MASK(M1535_IRQ_RTC) | \ - M1535_IRQ_MASK(M1535_IRQ_FDC) | \ - M1535_IRQ_MASK(M1535_IRQ_PS2)) - -#define M1535_IRQ_LEVEL (M1535_IRQ_MASK(M1535_IRQ_IDE) | \ - M1535_IRQ_MASK(M1535_IRQ_USB) | \ - M1535_IRQ_MASK(M1535_IRQ_INTA) | \ - M1535_IRQ_MASK(M1535_IRQ_INTB) | \ - M1535_IRQ_MASK(M1535_IRQ_INTC) | \ - M1535_IRQ_MASK(M1535_IRQ_INTD)) - -struct irq_map_entry { - u16 bus; - u8 slot; - u8 irq; -}; -static struct irq_map_entry int_map[] = { - {1, ROCKHOPPER_M5451_SLOT, M1535_IRQ_AUDIO}, /* Audio controller */ - {1, ROCKHOPPER_PCI1_SLOT, M1535_IRQ_INTD}, /* PCI slot #1 */ - {1, ROCKHOPPER_PCI2_SLOT, M1535_IRQ_INTC}, /* PCI slot #2 */ - {1, ROCKHOPPER_M5237_SLOT, M1535_IRQ_USB}, /* USB host controller */ - {1, ROCKHOPPER_M5229_SLOT, IDE_PRIMARY_IRQ}, /* IDE controller */ - {2, ROCKHOPPER_PCNET_SLOT, M1535_IRQ_INTD}, /* AMD Am79c973 on-board - ethernet */ - {2, ROCKHOPPER_PCI3_SLOT, M1535_IRQ_INTB}, /* PCI slot #3 */ - {2, ROCKHOPPER_PCI4_SLOT, M1535_IRQ_INTC} /* PCI slot #4 */ -}; - -static int pci_intlines[] = - { M1535_IRQ_INTA, M1535_IRQ_INTB, M1535_IRQ_INTC, M1535_IRQ_INTD }; - -/* Determine the Rockhopper IRQ line number for the PCI device */ -int rockhopper_get_irq(struct pci_dev *dev, u8 pin, u8 slot) -{ - struct pci_bus *bus; - int i; - - bus = dev->bus; - if (bus == NULL) - return -1; - - for (i = 0; i < ARRAY_SIZE(int_map); i++) { - if (int_map[i].bus == bus->number && int_map[i].slot == slot) { - int line; - for (line = 0; line < 4; line++) - if (pci_intlines[line] == int_map[i].irq) - break; - if (line < 4) - return pci_intlines[(line + (pin - 1)) % 4]; - else - return int_map[i].irq; - } - } - return -1; -} - -#ifdef CONFIG_ROCKHOPPER -void i8259_init(void) -{ - init_i8259_irqs(); - - outb(0x00, 0x4d0); - outb(0x02, 0x4d1); /* USB IRQ9 is level */ -} -#endif - -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - pci_probe_only = 1; - -#ifdef CONFIG_ROCKHOPPER - if( dev->bus->number == 1 && vr4133_rockhopper ) { - if(slot == ROCKHOPPER_PCI1_SLOT || slot == ROCKHOPPER_PCI2_SLOT) - dev->irq = CMBVR41XX_INTA_IRQ; - else - dev->irq = rockhopper_get_irq(dev, pin, slot); - } else - dev->irq = CMBVR41XX_INTA_IRQ; -#else - dev->irq = CMBVR41XX_INTA_IRQ; -#endif - - return dev->irq; -} - -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, ali_m1535plus_init); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M5229, ali_m5229_init); - - diff --git a/arch/mips/vr41xx/Kconfig b/arch/mips/vr41xx/Kconfig index 559acc0..c1be6b3 100644 --- a/arch/mips/vr41xx/Kconfig +++ b/arch/mips/vr41xx/Kconfig @@ -23,16 +23,6 @@ config IBM_WORKPAD select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN -config NEC_CMBVR4133 - bool "NEC CMB-VR4133" - select CEVT_R4K - select CSRC_R4K - select DMA_NONCOHERENT - select IRQ_CPU - select HW_HAS_PCI - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_LITTLE_ENDIAN - config TANBAC_TB022X bool "TANBAC VR4131 multichip module and TANBAC VR4131DIMM" select CEVT_R4K @@ -73,13 +63,6 @@ config ZAO_CAPCELLA endchoice -config ROCKHOPPER - bool "Support for Rockhopper base board" - depends on NEC_CMBVR4133 - select PCI_VR41XX - select I8259 - select HAVE_STD_PC_SERIAL_PORT - choice prompt "Base board type" depends on TANBAC_TB022X diff --git a/arch/mips/vr41xx/nec-cmbvr4133/Makefile b/arch/mips/vr41xx/nec-cmbvr4133/Makefile deleted file mode 100644 index 5835cae..0000000 --- a/arch/mips/vr41xx/nec-cmbvr4133/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Makefile for the NEC-CMBVR4133 -# - -obj-y := init.o setup.o - -obj-$(CONFIG_PCI) += m1535plus.o -obj-$(CONFIG_ROCKHOPPER) += irq.o diff --git a/arch/mips/vr41xx/nec-cmbvr4133/init.c b/arch/mips/vr41xx/nec-cmbvr4133/init.c deleted file mode 100644 index 7c5e18e..0000000 --- a/arch/mips/vr41xx/nec-cmbvr4133/init.c +++ /dev/null @@ -1,65 +0,0 @@ -/* - * arch/mips/vr41xx/nec-cmbvr4133/init.c - * - * PROM library initialisation code for NEC CMB-VR4133 board. - * - * Author: Yoichi Yuasa and - * Jun Sun and - * Alex Sapkov - * - * 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for NEC-CMBVR4133 in 2.6 - * Manish Lachwani (mlachwani@mvista.com) - */ - -#ifdef CONFIG_ROCKHOPPER -#include -#include - -#define PCICONFDREG 0xaf000c14 -#define PCICONFAREG 0xaf000c18 - -void disable_pcnet(void) -{ - u32 data; - - /* - * Workaround for the bug in PMON on VR4133. PMON leaves - * AMD PCNet controller (on Rockhopper) initialized and running in - * bus master mode. We have do disable it before doing any - * further initialization. Or we get problems with PCI bus 2 - * and random lockups and crashes. - */ - - writel((2 << 16) | - (PCI_DEVFN(1, 0) << 8) | - (0 & 0xfc) | - 1UL, - PCICONFAREG); - - data = readl(PCICONFDREG); - - writel((2 << 16) | - (PCI_DEVFN(1, 0) << 8) | - (4 & 0xfc) | - 1UL, - PCICONFAREG); - - data = readl(PCICONFDREG); - - writel((2 << 16) | - (PCI_DEVFN(1, 0) << 8) | - (4 & 0xfc) | - 1UL, - PCICONFAREG); - - data &= ~4; - - writel(data, PCICONFDREG); -} -#endif - diff --git a/arch/mips/vr41xx/nec-cmbvr4133/irq.c b/arch/mips/vr41xx/nec-cmbvr4133/irq.c deleted file mode 100644 index 7d2d076..0000000 --- a/arch/mips/vr41xx/nec-cmbvr4133/irq.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * arch/mips/vr41xx/nec-cmbvr4133/irq.c - * - * Interrupt routines for the NEC CMB-VR4133 board. - * - * Author: Yoichi Yuasa and - * Alex Sapkov - * - * 2003-2004 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for NEC-CMBVR4133 in 2.6 - * Manish Lachwani (mlachwani@mvista.com) - */ -#include -#include -#include -#include -#include - -#include -#include -#include - -extern int vr4133_rockhopper; - -static int i8259_get_irq_number(int irq) -{ - return i8259_irq(); -} - -void __init rockhopper_init_irq(void) -{ - int i; - - if(!vr4133_rockhopper) { - printk(KERN_ERR "Not a Rockhopper Board \n"); - return; - } - - vr41xx_set_irq_trigger(CMBVR41XX_INTC_PIN, TRIGGER_LEVEL, SIGNAL_THROUGH); - vr41xx_set_irq_level(CMBVR41XX_INTC_PIN, LEVEL_HIGH); - vr41xx_cascade_irq(CMBVR41XX_INTC_IRQ, i8259_get_irq_number); -} diff --git a/arch/mips/vr41xx/nec-cmbvr4133/m1535plus.c b/arch/mips/vr41xx/nec-cmbvr4133/m1535plus.c deleted file mode 100644 index 1341f32..0000000 --- a/arch/mips/vr41xx/nec-cmbvr4133/m1535plus.c +++ /dev/null @@ -1,249 +0,0 @@ -/* - * arch/mips/vr41xx/nec-cmbvr4133/m1535plus.c - * - * Initialize for ALi M1535+(included M5229 and M5237). - * - * Author: Yoichi Yuasa and - * Alex Sapkov - * - * 2003-2004 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for NEC-CMBVR4133 in 2.6 - * Author: Manish Lachwani (mlachwani@mvista.com) - */ -#include -#include -#include - -#include -#include -#include - -#define CONFIG_PORT(port) ((port) ? 0x3f0 : 0x370) -#define DATA_PORT(port) ((port) ? 0x3f1 : 0x371) -#define INDEX_PORT(port) CONFIG_PORT(port) - -#define ENTER_CONFIG_MODE(port) \ - do { \ - outb_p(0x51, CONFIG_PORT(port)); \ - outb_p(0x23, CONFIG_PORT(port)); \ - } while(0) - -#define SELECT_LOGICAL_DEVICE(port, dev_no) \ - do { \ - outb_p(0x07, INDEX_PORT(port)); \ - outb_p((dev_no), DATA_PORT(port)); \ - } while(0) - -#define WRITE_CONFIG_DATA(port, index, data) \ - do { \ - outb_p((index), INDEX_PORT(port)); \ - outb_p((data), DATA_PORT(port)); \ - } while(0) - -#define EXIT_CONFIG_MODE(port) outb(0xbb, CONFIG_PORT(port)) - -#define PCI_CONFIG_ADDR KSEG1ADDR(0x0f000c18) -#define PCI_CONFIG_DATA KSEG1ADDR(0x0f000c14) - -#ifdef CONFIG_BLK_DEV_FD - -void __devinit ali_m1535plus_fdc_init(int port) -{ - ENTER_CONFIG_MODE(port); - SELECT_LOGICAL_DEVICE(port, 0); /* FDC */ - WRITE_CONFIG_DATA(port, 0x30, 0x01); /* FDC: enable */ - WRITE_CONFIG_DATA(port, 0x60, 0x03); /* I/O port base: 0x3f0 */ - WRITE_CONFIG_DATA(port, 0x61, 0xf0); - WRITE_CONFIG_DATA(port, 0x70, 0x06); /* IRQ: 6 */ - WRITE_CONFIG_DATA(port, 0x74, 0x02); /* DMA: channel 2 */ - WRITE_CONFIG_DATA(port, 0xf0, 0x08); - WRITE_CONFIG_DATA(port, 0xf1, 0x00); - WRITE_CONFIG_DATA(port, 0xf2, 0xff); - WRITE_CONFIG_DATA(port, 0xf4, 0x00); - EXIT_CONFIG_MODE(port); -} - -#endif - -void __devinit ali_m1535plus_parport_init(int port) -{ - ENTER_CONFIG_MODE(port); - SELECT_LOGICAL_DEVICE(port, 3); /* Parallel Port */ - WRITE_CONFIG_DATA(port, 0x30, 0x01); - WRITE_CONFIG_DATA(port, 0x60, 0x03); /* I/O port base: 0x378 */ - WRITE_CONFIG_DATA(port, 0x61, 0x78); - WRITE_CONFIG_DATA(port, 0x70, 0x07); /* IRQ: 7 */ - WRITE_CONFIG_DATA(port, 0x74, 0x04); /* DMA: None */ - WRITE_CONFIG_DATA(port, 0xf0, 0x8c); /* IRQ polarity: Active Low */ - WRITE_CONFIG_DATA(port, 0xf1, 0xc5); - EXIT_CONFIG_MODE(port); -} - -void __devinit ali_m1535plus_keyboard_init(int port) -{ - ENTER_CONFIG_MODE(port); - SELECT_LOGICAL_DEVICE(port, 7); /* KEYBOARD */ - WRITE_CONFIG_DATA(port, 0x30, 0x01); /* KEYBOARD: eable */ - WRITE_CONFIG_DATA(port, 0x70, 0x01); /* IRQ: 1 */ - WRITE_CONFIG_DATA(port, 0x72, 0x0c); /* PS/2 Mouse IRQ: 12 */ - WRITE_CONFIG_DATA(port, 0xf0, 0x00); - EXIT_CONFIG_MODE(port); -} - -void __devinit ali_m1535plus_hotkey_init(int port) -{ - ENTER_CONFIG_MODE(port); - SELECT_LOGICAL_DEVICE(port, 0xc); /* HOTKEY */ - WRITE_CONFIG_DATA(port, 0x30, 0x00); - WRITE_CONFIG_DATA(port, 0xf0, 0x35); - WRITE_CONFIG_DATA(port, 0xf1, 0x14); - WRITE_CONFIG_DATA(port, 0xf2, 0x11); - WRITE_CONFIG_DATA(port, 0xf3, 0x71); - WRITE_CONFIG_DATA(port, 0xf5, 0x05); - EXIT_CONFIG_MODE(port); -} - -void ali_m1535plus_init(struct pci_dev *dev) -{ - pci_write_config_byte(dev, 0x40, 0x18); /* PCI Interface Control */ - pci_write_config_byte(dev, 0x41, 0xc0); /* PS2 keyb & mouse enable */ - pci_write_config_byte(dev, 0x42, 0x41); /* ISA bus cycle control */ - pci_write_config_byte(dev, 0x43, 0x00); /* ISA bus cycle control 2 */ - pci_write_config_byte(dev, 0x44, 0x5d); /* IDE enable & IRQ 14 */ - pci_write_config_byte(dev, 0x45, 0x0b); /* PCI int polling mode */ - pci_write_config_byte(dev, 0x47, 0x00); /* BIOS chip select control */ - - /* IRQ routing */ - pci_write_config_byte(dev, 0x48, 0x03); /* INTA IRQ10, INTB disable */ - pci_write_config_byte(dev, 0x49, 0x00); /* INTC and INTD disable */ - pci_write_config_byte(dev, 0x4a, 0x00); /* INTE and INTF disable */ - pci_write_config_byte(dev, 0x4b, 0x90); /* Audio IRQ11, Modem disable */ - - pci_write_config_word(dev, 0x50, 0x4000); /* Parity check IDE enable */ - pci_write_config_word(dev, 0x52, 0x0000); /* USB & RTC disable */ - pci_write_config_word(dev, 0x54, 0x0002); /* ??? no info */ - pci_write_config_word(dev, 0x56, 0x0002); /* PCS1J signal disable */ - - pci_write_config_byte(dev, 0x59, 0x00); /* PCSDS */ - pci_write_config_byte(dev, 0x5a, 0x00); - pci_write_config_byte(dev, 0x5b, 0x00); - pci_write_config_word(dev, 0x5c, 0x0000); - pci_write_config_byte(dev, 0x5e, 0x00); - pci_write_config_byte(dev, 0x5f, 0x00); - pci_write_config_word(dev, 0x60, 0x0000); - - pci_write_config_byte(dev, 0x6c, 0x00); - pci_write_config_byte(dev, 0x6d, 0x48); /* ROM address mapping */ - pci_write_config_byte(dev, 0x6e, 0x00); /* ??? what for? */ - - pci_write_config_byte(dev, 0x70, 0x12); /* Serial IRQ control */ - pci_write_config_byte(dev, 0x71, 0xEF); /* DMA channel select */ - pci_write_config_byte(dev, 0x72, 0x03); /* USB IDSEL */ - pci_write_config_byte(dev, 0x73, 0x00); /* ??? no info */ - - /* - * IRQ setup ALi M5237 USB Host Controller - * IRQ: 9 - */ - pci_write_config_byte(dev, 0x74, 0x01); /* USB IRQ9 */ - - pci_write_config_byte(dev, 0x75, 0x1f); /* IDE2 IRQ 15 */ - pci_write_config_byte(dev, 0x76, 0x80); /* ACPI disable */ - pci_write_config_byte(dev, 0x77, 0x40); /* Modem disable */ - pci_write_config_dword(dev, 0x78, 0x20000000); /* Pin select 2 */ - pci_write_config_byte(dev, 0x7c, 0x00); /* Pin select 3 */ - pci_write_config_byte(dev, 0x81, 0x00); /* ID read/write control */ - pci_write_config_byte(dev, 0x90, 0x00); /* PCI PM block control */ - pci_write_config_word(dev, 0xa4, 0x0000); /* PMSCR */ - -#ifdef CONFIG_BLK_DEV_FD - ali_m1535plus_fdc_init(1); -#endif - - ali_m1535plus_keyboard_init(1); - ali_m1535plus_hotkey_init(1); -} - -static inline void ali_config_writeb(u8 reg, u8 val, int devfn) -{ - u32 data; - int shift; - - writel((1 << 16) | (devfn << 8) | (reg & 0xfc) | 1UL, PCI_CONFIG_ADDR); - data = readl(PCI_CONFIG_DATA); - - shift = (reg & 3) << 3; - data &= ~(0xff << shift); - data |= (((u32)val) << shift); - - writel(data, PCI_CONFIG_DATA); -} - -static inline u8 ali_config_readb(u8 reg, int devfn) -{ - u32 data; - - writel((1 << 16) | (devfn << 8) | (reg & 0xfc) | 1UL, PCI_CONFIG_ADDR); - data = readl(PCI_CONFIG_DATA); - - return (u8)(data >> ((reg & 3) << 3)); -} - -static inline u16 ali_config_readw(u8 reg, int devfn) -{ - u32 data; - - writel((1 << 16) | (devfn << 8) | (reg & 0xfc) | 1UL, PCI_CONFIG_ADDR); - data = readl(PCI_CONFIG_DATA); - - return (u16)(data >> ((reg & 2) << 3)); -} - -int vr4133_rockhopper = 0; -void __init ali_m5229_preinit(void) -{ - if (ali_config_readw(PCI_VENDOR_ID, 16) == PCI_VENDOR_ID_AL && - ali_config_readw(PCI_DEVICE_ID, 16) == PCI_DEVICE_ID_AL_M1533) { - printk(KERN_INFO "Found an NEC Rockhopper \n"); - vr4133_rockhopper = 1; - /* - * Enable ALi M5229 IDE Controller (both channels) - * IDSEL: A27 - */ - ali_config_writeb(0x58, 0x4c, 16); - } -} - -void __init ali_m5229_init(struct pci_dev *dev) -{ - /* - * Enable Primary/Secondary Channel Cable Detect 40-Pin - */ - pci_write_config_word(dev, 0x4a, 0xc023); - - /* - * Set only the 3rd byteis for the master IDE's cycle and - * enable Internal IDE Function - */ - pci_write_config_byte(dev, 0x50, 0x23); /* Class code attr register */ - - pci_write_config_byte(dev, 0x09, 0xff); /* Set native mode & stuff */ - pci_write_config_byte(dev, 0x52, 0x00); /* use timing registers */ - pci_write_config_byte(dev, 0x58, 0x02); /* Primary addr setup timing */ - pci_write_config_byte(dev, 0x59, 0x22); /* Primary cmd block timing */ - pci_write_config_byte(dev, 0x5a, 0x22); /* Pr drv 0 R/W timing */ - pci_write_config_byte(dev, 0x5b, 0x22); /* Pr drv 1 R/W timing */ - pci_write_config_byte(dev, 0x5c, 0x02); /* Sec addr setup timing */ - pci_write_config_byte(dev, 0x5d, 0x22); /* Sec cmd block timing */ - pci_write_config_byte(dev, 0x5e, 0x22); /* Sec drv 0 R/W timing */ - pci_write_config_byte(dev, 0x5f, 0x22); /* Sec drv 1 R/W timing */ - pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20); - pci_write_config_word(dev, PCI_COMMAND, - PCI_COMMAND_PARITY | PCI_COMMAND_MASTER | - PCI_COMMAND_IO); -} - diff --git a/arch/mips/vr41xx/nec-cmbvr4133/setup.c b/arch/mips/vr41xx/nec-cmbvr4133/setup.c deleted file mode 100644 index 7723d20..0000000 --- a/arch/mips/vr41xx/nec-cmbvr4133/setup.c +++ /dev/null @@ -1,89 +0,0 @@ -/* - * arch/mips/vr41xx/nec-cmbvr4133/setup.c - * - * Setup for the NEC CMB-VR4133. - * - * Author: Yoichi Yuasa and - * Alex Sapkov - * - * 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for CMBVR4133 board in 2.6 - * Author: Manish Lachwani (mlachwani@mvista.com) - */ -#include -#include -#include - -#include -#include -#include -#include - -#ifdef CONFIG_MTD -#include -#include -#include -#include - -static struct mtd_partition cmbvr4133_mtd_parts[] = { - { - .name = "User FS", - .size = 0x1be0000, - .offset = 0, - .mask_flags = 0, - }, - { - .name = "PMON", - .size = 0x140000, - .offset = MTDPART_OFS_APPEND, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "User FS2", - .size = MTDPART_SIZ_FULL, - .offset = MTDPART_OFS_APPEND, - .mask_flags = 0, - } -}; - -#define number_partitions ARRAY_SIZE(cmbvr4133_mtd_parts) -#endif - -extern void i8259_init(void); - -static void __init nec_cmbvr4133_setup(void) -{ -#ifdef CONFIG_ROCKHOPPER - extern void disable_pcnet(void); - - disable_pcnet(); -#endif - set_io_port_base(KSEG1ADDR(0x16000000)); - -#ifdef CONFIG_PCI -#ifdef CONFIG_ROCKHOPPER - ali_m5229_preinit(); -#endif -#endif - -#ifdef CONFIG_ROCKHOPPER - rockhopper_init_irq(); -#endif - -#ifdef CONFIG_MTD - /* we use generic physmap mapping driver and we use partitions */ - physmap_configure(0x1C000000, 0x02000000, 4, NULL); - physmap_set_partitions(cmbvr4133_mtd_parts, number_partitions); -#endif - - /* 128 MB memory support */ - add_memory_region(0, 0x08000000, BOOT_MEM_RAM); - -#ifdef CONFIG_ROCKHOPPER - i8259_init(); -#endif -} diff --git a/include/asm-mips/mach-vr41xx/irq.h b/include/asm-mips/mach-vr41xx/irq.h index 8488122..862058d 100644 --- a/include/asm-mips/mach-vr41xx/irq.h +++ b/include/asm-mips/mach-vr41xx/irq.h @@ -2,9 +2,6 @@ #define __ASM_MACH_VR41XX_IRQ_H #include /* for MIPS_CPU_IRQ_BASE */ -#ifdef CONFIG_NEC_CMBVR4133 -#include /* for I8259A_IRQ_BASE */ -#endif #include_next diff --git a/include/asm-mips/vr41xx/cmbvr4133.h b/include/asm-mips/vr41xx/cmbvr4133.h deleted file mode 100644 index 4230003..0000000 --- a/include/asm-mips/vr41xx/cmbvr4133.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * include/asm-mips/vr41xx/cmbvr4133.h - * - * Include file for NEC CMB-VR4133. - * - * Author: Yoichi Yuasa and - * Jun Sun and - * Alex Sapkov - * - * 2002-2004 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __NEC_CMBVR4133_H -#define __NEC_CMBVR4133_H - -#include - -/* - * General-Purpose I/O Pin Number - */ -#define CMBVR41XX_INTA_PIN 1 -#define CMBVR41XX_INTB_PIN 1 -#define CMBVR41XX_INTC_PIN 3 -#define CMBVR41XX_INTD_PIN 1 -#define CMBVR41XX_INTE_PIN 1 - -/* - * Interrupt Number - */ -#define CMBVR41XX_INTA_IRQ GIU_IRQ(CMBVR41XX_INTA_PIN) -#define CMBVR41XX_INTB_IRQ GIU_IRQ(CMBVR41XX_INTB_PIN) -#define CMBVR41XX_INTC_IRQ GIU_IRQ(CMBVR41XX_INTC_PIN) -#define CMBVR41XX_INTD_IRQ GIU_IRQ(CMBVR41XX_INTD_PIN) -#define CMBVR41XX_INTE_IRQ GIU_IRQ(CMBVR41XX_INTE_PIN) - -#define I8259A_IRQ_BASE 72 -#define I8259_IRQ(x) (I8259A_IRQ_BASE + (x)) -#define TIMER_IRQ I8259_IRQ(0) -#define KEYBOARD_IRQ I8259_IRQ(1) -#define I8259_SLAVE_IRQ I8259_IRQ(2) -#define UART3_IRQ I8259_IRQ(3) -#define UART1_IRQ I8259_IRQ(4) -#define UART2_IRQ I8259_IRQ(5) -#define FDC_IRQ I8259_IRQ(6) -#define PARPORT_IRQ I8259_IRQ(7) -#define RTC_IRQ I8259_IRQ(8) -#define USB_IRQ I8259_IRQ(9) -#define I8259_INTA_IRQ I8259_IRQ(10) -#define AUDIO_IRQ I8259_IRQ(11) -#define AUX_IRQ I8259_IRQ(12) -#define IDE_PRIMARY_IRQ I8259_IRQ(14) -#define IDE_SECONDARY_IRQ I8259_IRQ(15) - -#endif /* __NEC_CMBVR4133_H */