Gerd Hoffmann [Fri, 31 Jul 2009 10:25:37 +0000 (12:25 +0200)]
QemuOpts: switch over -device.
Make -device switch use the QemuOpts framework.
Everything should continue to work like it did before.
New: "-set device.$id.$property=$value" works.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
Gerd Hoffmann [Fri, 31 Jul 2009 10:25:36 +0000 (12:25 +0200)]
QemuOpts: add -set option
One use case will be file for drives (no filename quoting issues), i.e.
-drive id=test,if=virtio
-set drive.test.file=/vmdisk/test-virtio.img
It will work for any other option (assuming handled by QemuOpts) though.
Except for id= for obvious reasons ;).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
Gerd Hoffmann [Fri, 31 Jul 2009 10:25:35 +0000 (12:25 +0200)]
QemuOpts: create qemu-config.h
Move drive option description there.
Rename it, give it a qemu_ prefix.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
Gerd Hoffmann [Fri, 31 Jul 2009 10:25:34 +0000 (12:25 +0200)]
QemuOpts: make the drive id actually show up in "info block".
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
Gerd Hoffmann [Fri, 31 Jul 2009 10:25:33 +0000 (12:25 +0200)]
QemuOpts: qemu_opts_parse: fix id= parsing
We can't use get_param_value(), it can't handle parameters without
'=' in there. Examples not working because of that:
-device foo,id=bar
-device file=/path/image,format=qcow2,snapshot,id=disk0
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
Gerd Hoffmann [Fri, 31 Jul 2009 10:25:32 +0000 (12:25 +0200)]
QemuOpts: add some functions
qemu_opt_foreach: loop over all QemuOpts entries.
qemu_opts_id: return QemuOpts id.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
Laurent Desnogues [Thu, 30 Jul 2009 17:23:49 +0000 (19:23 +0200)]
Fix symfind.
this patch fixes an issue in symfind.
Assume you have the following symbols:
Address Size
0045bca0 00000080 T s0
0045bd20 00000112 T s1
You'll notice that s1 is s0 + size.
So the current symfind will find that address
0045bd20 belongs to s0
instead of s1.
Laurent
Signed-off-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
Christoph Egger [Thu, 30 Jul 2009 13:33:57 +0000 (15:33 +0200)]
configure: let it find xen headers and libs
Attached patch lets configure find xen headers and libs
with --extra-cflags and --extra-ldlfags option.
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
Christoph Egger [Thu, 30 Jul 2009 13:28:45 +0000 (15:28 +0200)]
tolower -> qemu_tolower
Use qemu_tolower() instead of tolower().
Fixes warning on NetBSD.
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
malc [Sun, 9 Aug 2009 23:40:16 +0000 (03:40 +0400)]
Do not try to invoke shebang scripts directly (NFS issues)
Signed-off-by: malc <av1474@comtv.ru>
Blue Swirl [Sun, 9 Aug 2009 08:42:19 +0000 (08:42 +0000)]
Use qemu_irq for system_powerdown
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sun, 9 Aug 2009 07:27:29 +0000 (07:27 +0000)]
Sparc32: use qemu_irq for system_powerdown
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sat, 8 Aug 2009 21:43:12 +0000 (21:43 +0000)]
Sparc32: move sparc32_dma init to sun4m.c
Also connect ESP and Lance reset signals to DMA.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sat, 8 Aug 2009 21:04:18 +0000 (21:04 +0000)]
Sparc32: remove VRAM and NVRAM sizes from hwdef
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sat, 8 Aug 2009 20:55:37 +0000 (20:55 +0000)]
Sparc32: remove IRQ numbers from hwdef
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sat, 8 Aug 2009 20:36:08 +0000 (20:36 +0000)]
Sparc32: move intbit_to_level table back to slavio_intctl.c
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sat, 8 Aug 2009 20:24:47 +0000 (20:24 +0000)]
Sparc32: move device instantiation to sun4m.c
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sat, 8 Aug 2009 20:08:15 +0000 (20:08 +0000)]
Sparc32: Refactor slavio timer
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sat, 8 Aug 2009 10:47:15 +0000 (10:47 +0000)]
ppc_newworld: configure screen size from QEMU command line options
Use the FW_CFG interface to send user requested screen size and depth to
OpenBIOS like
7f1aec5f93382eef75920899f4065613aeaf02a2 for ppc_oldworld.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sat, 8 Aug 2009 10:44:56 +0000 (10:44 +0000)]
Sparc64: configure screen size from QEMU command line options
Use the FW_CFG interface to send user requested screen size and depth to
OpenBIOS like
7f1aec5f93382eef75920899f4065613aeaf02a2 for ppc_oldworld.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Laurent Vivier [Sat, 8 Aug 2009 10:19:24 +0000 (10:19 +0000)]
ppc_oldworld: configure screen size from qemu command line options
This patch uses the FW_CFG interface to send user requested screen size
and depth to openbios.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Igor Kovalenko [Mon, 3 Aug 2009 19:15:02 +0000 (23:15 +0400)]
Sparc64: replace tsptr with helper routine
tl and tsptr of members sparc64 cpu state must be changed
simultaneously to keep trap state window in sync with current
trap level. Currently translation of store to tl does not change
tsptr, which leads to corrupt trap state on corresponding
trap level.
This patch removes tsptr from sparc64 cpu state and replaces
all uses with call to helper routine.
Changes v0->v1:
- reimplemented helper routine with tcg generator
- on cpu reset trap type and pstate are populated with power-on reset
values, including tl=maxtl
Signed-off-by: igor.v.kovalenko@gmail.com
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Nathan Froyd [Mon, 3 Aug 2009 15:43:29 +0000 (08:43 -0700)]
linux-user: make FUTEX_* calls honor timeout parameter
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: malc <av1474@comtv.ru>
Nathan Froyd [Mon, 3 Aug 2009 15:43:28 +0000 (08:43 -0700)]
enable NPTL for ppc-linux-user targets in configure
Enabling support for ppc64-linux-user should be easy enough to do later.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: malc <av1474@comtv.ru>
Nathan Froyd [Mon, 3 Aug 2009 15:43:27 +0000 (08:43 -0700)]
linux-user: handle POWERPC_EXCP_STCX
We handle conditional stores as an exception so we can ensure that no
other thread is changing memory out from underneath us.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: malc <av1474@comtv.ru>
Nathan Froyd [Mon, 3 Aug 2009 15:43:26 +0000 (08:43 -0700)]
target-ppc: add exceptions for conditional stores
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: malc <av1474@comtv.ru>
Nathan Froyd [Mon, 3 Aug 2009 15:43:25 +0000 (08:43 -0700)]
target-ppc: retain l{w,d}arx loaded value
We do this so we can check on the corresponding stc{w,d}x. whether the
value has changed. It's a poor man's form of implementing atomic
operations and is valid only for NPTL usermode Linux emulation.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: malc <av1474@comtv.ru>
Nathan Froyd [Mon, 3 Aug 2009 15:43:24 +0000 (08:43 -0700)]
target-ppc: add cpu_set_tls
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: malc <av1474@comtv.ru>
Nathan Froyd [Mon, 3 Aug 2009 15:43:23 +0000 (08:43 -0700)]
target-ppc: fix cpu_clone_regs
We only need to make sure that the clone syscall looks like it
succeeded, not clobber 60% of the register set.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: malc <av1474@comtv.ru>
Blue Swirl [Sat, 1 Aug 2009 10:29:42 +0000 (10:29 +0000)]
Fix Sparse warning about missing prototype
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sat, 1 Aug 2009 10:13:44 +0000 (10:13 +0000)]
Fix Sparse warning about "expression using sizeof on a function"
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sat, 1 Aug 2009 10:13:43 +0000 (10:13 +0000)]
Add missing "static"
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sat, 1 Aug 2009 10:13:20 +0000 (10:13 +0000)]
More NULL pointer fixes
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Fri, 31 Jul 2009 21:16:51 +0000 (21:16 +0000)]
Fix Sparse warnings: "Using plain integer as NULL pointer"
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Fri, 31 Jul 2009 20:23:28 +0000 (20:23 +0000)]
PPC: convert Uni-north to qdev: also fixes Mac99 machine crash
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Fri, 31 Jul 2009 20:23:02 +0000 (20:23 +0000)]
PPC: convert Grackle to qdev
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Paul Brook [Fri, 31 Jul 2009 12:18:32 +0000 (13:18 +0100)]
Option rom makefile fixes
Fix toplevel option rom makefile rules.
Signed-off-by: Paul Brook <paul@codesourcery.com>
Paul Brook [Thu, 30 Jul 2009 12:33:47 +0000 (13:33 +0100)]
Save/restore ARMv6 MMU state
Correctly save/restore ARMV6 MMU state.
Signed-off-by: Paul Brook <paul@codesourcery.com>
Blue Swirl [Fri, 31 Jul 2009 07:26:44 +0000 (07:26 +0000)]
esp: fix interrupt register read
Read of interrupt register should clear it and also sequence step and status.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Igor Kovalenko [Tue, 28 Jul 2009 21:32:23 +0000 (01:32 +0400)]
sparc64 flush pending conditional evaluations before exposing cpu state
If translation block is interrupted by e.g. mmu exception
we need to compute conditional flags for inclusion into
saved cpu state. Otherwise after return from trap
conditional instructions would use stale psr/xcc data.
Signed-off-by: igor.v.kovalenko@gmail.com
--
Kind regards,
Igor V. Kovalenko
Blue Swirl [Fri, 31 Jul 2009 06:10:02 +0000 (09:10 +0300)]
Fix SDL zooming with pl110 (cf.
d3ffcafe25b5966b351ea6100160c2156688f22f)
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Bill Paul [Wed, 29 Jul 2009 17:22:55 +0000 (10:22 -0700)]
e1000.c doesn't properly emulate EERD and ICS registers
Once again, the emulation of the EERD and ICS registers in e1000.c is
incorrect. Nobody has noticed this before because none of the Intel-written
e1000 drivers use these registers, and all of the independently written open
source drivers copy Intel's example, so they don't use them either.
Regardless, these registers are documented in the programmer's manuals, and
their emulated behavior doesn't match the verified behavior of real hardware,
so any software that does use them doesn't function correctly.
-Bill
Signed-off-by: Bill Paul <wpaul@windriver.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Wed, 29 Jul 2009 08:39:59 +0000 (10:39 +0200)]
qemu-option: fix parse_option_number().
It works much better when parse_option_number actually
returns the number parsed ...
Common breakage resulting from this bug is that
'qemu -hda foo.img -cdrom bar.iso' stops working
(cdrom isn't there).
Cc: Avi Kivity <avi@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Tue, 28 Jul 2009 16:18:00 +0000 (18:18 +0200)]
qdev: convert all vga devices.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Wed, 29 Jul 2009 11:12:24 +0000 (13:12 +0200)]
qdev/core: add monitor command to list all drivers
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Wed, 29 Jul 2009 11:12:23 +0000 (13:12 +0200)]
qdev: factor out qdev_print_devinfo.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Markus Armbruster [Tue, 28 Jul 2009 18:33:41 +0000 (14:33 -0400)]
Fix VM state change handlers running out of order
When a VM state change handler changes VM state, other VM state change
handlers can see the state transitions out of order.
bmdma_map(), scsi_disk_init() and virtio_blk_init() install VM state
change handlers to restart DMA. These handlers can vm_stop() by
running into a write error on a drive with werror=stop. This throws
the VM state change handler callback into disarray. Here's an example
case I observed:
0. The virtual IDE drive goes south. All future writes return errors.
1. Something encounters a write error, and duly stops the VM with
vm_stop().
2. vm_stop() calls vm_state_notify(0).
3. vm_state_notify() runs the callbacks in list vm_change_state_head.
It contains ide_dma_restart_cb() installed by bmdma_map(). It also
contains audio_vm_change_state_handler() installed by audio_init().
4. audio_vm_change_state_handler() stops audio stuff.
5. User continues VM with monitor command "c". This runs vm_start().
6. vm_start() calls vm_state_notify(1).
7. vm_state_notify() runs the callbacks in vm_change_state_head.
8. ide_dma_restart_cb() happens to come first. It does its work, runs
into a write error, and duly stops the VM with vm_stop().
9. vm_stop() runs vm_state_notify(0).
10. vm_state_notify() runs the callbacks in vm_change_state_head.
11. audio_vm_change_state_handler() stops audio stuff. Which isn't
running.
12. vm_stop() finishes, ide_dma_restart_cb() finishes, step 7's
vm_state_notify() resumes running handlers.
13. audio_vm_change_state_handler() starts audio stuff. Oopsie.
Fix this by moving the actual write from each VM state change handler
into a new bottom half (suggested by Gleb Natapov).
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Mon, 27 Jul 2009 15:10:48 +0000 (17:10 +0200)]
vnc: fix copyrect screen corruption
When sending a copyrect command to the vnc client, we must also update
the local server surface. Otherwise the server's and the client's idea
of the screen content run out of sync and screen updates don't work
correctly.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Mark McLoughlin [Thu, 30 Jul 2009 10:29:13 +0000 (11:29 +0100)]
Remove the virtio-{blk, console}-pci-0-10 device types
These are now unused.
However, perhaps the idea is that when we add -device, they will be
useful? In that case, we should add virtio-net-pci-0-10 too.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Mark McLoughlin [Thu, 30 Jul 2009 10:29:12 +0000 (11:29 +0100)]
Remove the pc-0-10 machine type
We have the pc-0.10 machine type now which does exactly the same
thing.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Mon, 27 Jul 2009 21:17:51 +0000 (23:17 +0200)]
fix migration to obey -S
Since migration returns right away, starting the VM right
after calling qemu_start_incoming_migration is wrong even
if -S is not passed. We have to do this after migration
has completed.
Cc: Glauber Costa <glommer@redhat.com>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Bjørn Mork [Thu, 30 Jul 2009 07:44:26 +0000 (09:44 +0200)]
alsa: add host suspend/resume support
Both input and output streams may be in SND_PCM_STATE_SUSPENDED
after the host is suspended and resumed, meaning "Hardware is
suspended". snd_pcm_readi() and snd_pcm_writei() will return
-ESTRPIPE if called while the stream is in this state.
Call snd_pcm_resume() to enable audio output and capture after
host resume.
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: malc <av1474@comtv.ru>
Anthony Liguori [Tue, 28 Jul 2009 20:48:31 +0000 (15:48 -0500)]
Define ENOTSUP anywhere it isn't defined
I confused ENOTSUP with ENOTSUPP. Juan's original patch was correct.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Mon, 27 Jul 2009 20:23:59 +0000 (15:23 -0500)]
Revert "Fake dirty loggin when it's not there"
This reverts commit
bd8367761236cd5c435598aeb2f1b8240c09b059.
PPC should just implement dirty logging so we can avoid all the fall-out from
this changeset.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Blue Swirl [Mon, 27 Jul 2009 19:59:36 +0000 (19:59 +0000)]
Fix out of tree build broken by
791e08c753a9f9be3c3880b4ea83b6dfa4b6ccad
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Anthony Liguori [Mon, 27 Jul 2009 19:55:25 +0000 (14:55 -0500)]
Fix typo WIN32 -> _WIN32
This was spotted by Juan Quintela
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Wed, 22 Jul 2009 20:37:40 +0000 (22:37 +0200)]
set SEARCH_PATH for the linker script from output of ld --verbose -v
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Wed, 22 Jul 2009 20:37:39 +0000 (22:37 +0200)]
generate LDFLAGS for *-linux-user and *-bsd-user in a single place in configure
Remove lots of duplicate code in the process
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Wed, 22 Jul 2009 20:37:38 +0000 (22:37 +0200)]
our build system don't support mips little endian linux-user or bsd-user
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Tue, 21 Jul 2009 12:11:22 +0000 (14:11 +0200)]
Don't build option roms on Mac OS X
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Tue, 21 Jul 2009 12:11:21 +0000 (14:11 +0200)]
multiboot.bin is a generated file
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Tue, 21 Jul 2009 12:11:20 +0000 (14:11 +0200)]
use cc-option for optionrom
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Tue, 21 Jul 2009 12:11:19 +0000 (14:11 +0200)]
Use quiet-command for building optionrom
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Tue, 21 Jul 2009 12:11:18 +0000 (14:11 +0200)]
move cc-option definition to rules.mak
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 27 Jul 2009 14:13:25 +0000 (16:13 +0200)]
Generate config-host.h from config-host.mak
Generate CONFIG_AUDIO_DRIVERS. Order is important here, because the
first driver in the list is the one used by default.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 27 Jul 2009 14:13:24 +0000 (16:13 +0200)]
rename USE_NPTL to CONFIG_USE_NPTL
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 27 Jul 2009 14:13:23 +0000 (16:13 +0200)]
rename NEEDS_LIBSUNMATH to CONFIG_NEEDS_LIBSUNMATH
Once there fix a place where it was misspelled
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 27 Jul 2009 14:13:22 +0000 (16:13 +0200)]
define ENOTSUP the same that the other errors
aliguori: ENOTSUP is not 4096 universally, only on OpenBSD
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 27 Jul 2009 14:13:21 +0000 (16:13 +0200)]
test if xen is enabled only once
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 27 Jul 2009 14:13:20 +0000 (16:13 +0200)]
simplify fdt libs selection
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 27 Jul 2009 14:13:19 +0000 (16:13 +0200)]
simplify vde libs selection
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 27 Jul 2009 14:13:18 +0000 (16:13 +0200)]
simplify brlapi selection
Use same style that everythnig else
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 27 Jul 2009 14:13:17 +0000 (16:13 +0200)]
simplify curses library selection
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 27 Jul 2009 14:13:16 +0000 (16:13 +0200)]
Define and use xen libs in a single place
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 27 Jul 2009 14:13:15 +0000 (16:13 +0200)]
indent with 2 spaces sdl tests
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 27 Jul 2009 14:13:14 +0000 (16:13 +0200)]
remove sdl_static. Just do the right thing if static is yes
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 27 Jul 2009 14:13:13 +0000 (16:13 +0200)]
target_softmmu is undefined at that point
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 27 Jul 2009 14:13:12 +0000 (16:13 +0200)]
instead of setup sdl_x11 just add -lX11 to sdl_libs
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 27 Jul 2009 14:13:11 +0000 (16:13 +0200)]
Calculate sdl_libs and sdl_flags and use them everywhere
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 27 Jul 2009 14:13:10 +0000 (16:13 +0200)]
sdl_config value was always sdl-config
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 27 Jul 2009 14:13:09 +0000 (16:13 +0200)]
the else part of this test is obsolete We are testing for sdl = yes inside the else part of the test if sdl = yes
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 27 Jul 2009 14:13:08 +0000 (16:13 +0200)]
Use CONFIG_POSIX to simplify Makefile
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 27 Jul 2009 14:13:07 +0000 (16:13 +0200)]
Add CONFIG_POSIX
We need a way to define posix-like (a.k.a. no win32)
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 27 Jul 2009 14:13:06 +0000 (16:13 +0200)]
rename WORDS_BIGENDIAN to HOST_WORDS_BIGENDIAN
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 27 Jul 2009 14:13:05 +0000 (16:13 +0200)]
rename DEBUG_EXEC to CONFIG_DEBUG_EXEC
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 27 Jul 2009 14:13:04 +0000 (16:13 +0200)]
rename DEBUG_TCG to CONFIG_DEBUG_TCG
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 27 Jul 2009 14:13:03 +0000 (16:13 +0200)]
rename HAVE_BYTESWAP_H to CONFIG_BYTESWAP_H
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 27 Jul 2009 14:13:02 +0000 (16:13 +0200)]
rename HAVE_GPROF to TARGET_GPROF
Use was not consistent, in Makefile was TARGET_GPROF and in *h HAVE_GPROF
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 27 Jul 2009 14:13:01 +0000 (16:13 +0200)]
rename HAVE_MACHINE_BSWAP_H to CONFIG_MACHINE_BSWAP_H
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 27 Jul 2009 14:13:00 +0000 (16:13 +0200)]
rename HAVE_FNMATCH_H to CONFIG_FNMATCH
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 27 Jul 2009 14:12:59 +0000 (16:12 +0200)]
rename HAVE_IOVEC to CONFIG_IOVEC
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 27 Jul 2009 14:12:58 +0000 (16:12 +0200)]
rename HAVE_PREADV to CONFIG_PREADV
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 27 Jul 2009 14:12:57 +0000 (16:12 +0200)]
define MAP_ANONYMOUS if it is not defined in qemu-common.h
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 27 Jul 2009 14:12:56 +0000 (16:12 +0200)]
rename HOST_BSD to CONFIG_BSD
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 27 Jul 2009 14:12:55 +0000 (16:12 +0200)]
O_LARGEFILE is already set in qemu-common.h
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 27 Jul 2009 14:12:54 +0000 (16:12 +0200)]
fix indententation
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 27 Jul 2009 14:12:53 +0000 (16:12 +0200)]
Refactor code to remove one #ifdef CONFIG_FDT
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 27 Jul 2009 14:12:52 +0000 (16:12 +0200)]
Rename HAVE_FDT to CONFIG_FDT and define it also in Makefile
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 27 Jul 2009 14:12:51 +0000 (16:12 +0200)]
Add -static in configure if needed
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Mon, 27 Jul 2009 14:12:50 +0000 (16:12 +0200)]
more specific config.mak can overwrote more general config.mak
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
projects / qemu / log