Remove use_other_browser_cmd()

[browser-switch] / README

diff --git a/README b/README
index e7917c6..e807f4b 100644 (file)
--- a/README
+++ b/README
@@ -1,4 +1,5 @@
 BROWSER SWITCHBOARD
 BROWSER SWITCHBOARD

+version 3.2

 
 Browser Switchboard is a program which allows you to choose which
 browser to use as the default browser. It supports MicroB, Tear,
 
 Browser Switchboard is a program which allows you to choose which
 browser to use as the default browser. It supports MicroB, Tear,

@@ -14,36 +15,38 @@ page on garage.maemo.org: https://garage.maemo.org/frs/?group_id=1159
 Quick Start:
 1. Download the binary package: browser-switchboard_X.Y-Z_all.deb
 (where X.Y-Z is the version number, of course).
 Quick Start:
 1. Download the binary package: browser-switchboard_X.Y-Z_all.deb
 (where X.Y-Z is the version number, of course).

-2. Install the package using the Application Manager (open the
+2. If you're using a Maemo 5 device, make sure all your MicroB browser
+windows are closed.
+3. Install the package using the Application Manager (open the

 Application Manager, then select Application->Install from file in the
 menu).
 
 Application Manager, then select Application->Install from file in the
 menu).
 

-If Tear (http://talk.maemo.org/showthread.php?t=28539) is installed,
-it should now be the default browser, meaning that links in most
-applications, locally-saved web pages opened in the file manager, and
-entries in the Web sidebar panel should now open in Tear.  If Tear isn't
-installed, MicroB will be used as the default browser; keep reading to
-see how to change the default browser to something else.
-
-MicroB can always be opened via the Web menu entry in the applications
-panel (located in the Internet menu by default), or by running "browser"
+You can now select the default browser by using the Browser Switchboard
+applet in the Control Panel.  Links in most applications, locally-saved
+web pages opened from the file manager, and (for Maemo 4.x) entries in
+the Web sidebar panel will open in the browser that you select as the
+default.  Opening the "Web" menu entry and running "browser" from the
+shell will also cause your chosen default browser to open.  If you don't
+configure a default browser, MicroB will continue to be used as the
+default browser.
+
+No matter which browser you select as the default, MicroB can always be
+opened via the MicroB menu entry in the applications menu (for Maemo
+4.x, installed in the Extras menu by default), or by running "microb"

 from the shell.  While MicroB is open, it will receive all links from
 other applications; closing MicroB will restore your chosen default
 browser.
 
 from the shell.  While MicroB is open, it will receive all links from
 other applications; closing MicroB will restore your chosen default
 browser.
 

-Some users have reported that a restart may be necessary to ensure that
-Browser Switchboard is functioning.  If you experience trouble after
-installing the package, try rebooting your device first.
+If you experience trouble after installing the package, try rebooting
+your device.  If that fixes things, please report this as a bug.

 
 
 
 

-Changing the Default Browser:
+Configuring the Default Browser by Hand:

 
 

-By default, Tear is used as the default browser if installed (otherwise
-MicroB is the default browser).  To change this behavior, you need to
-create a configuration file (from the shell for now -- a configuration
-UI is in the works).  From a shell on your device (xterm, SSH, or
-similar), run the following (where $ is your prompt, not something you
-type):
+If for some reason, you don't want to use the Control Panel applet to
+configure Browser Switchboard, you can create the configuration file by
+hand from a shell.  Run the following (where $ is your prompt, not
+something you type):

 
 $ cat > $HOME/.config/browser-switchboard <<EOF
 default_browser = "your_browser"
 
 $ cat > $HOME/.config/browser-switchboard <<EOF
 default_browser = "your_browser"

@@ -73,19 +76,26 @@ default_browser = "tear"
 # other_browser_cmd: If default browser is "other", what program
 # to run (%s will be replaced by URI)
 #other_browser_cmd = "some_browser %s"
 # other_browser_cmd: If default browser is "other", what program
 # to run (%s will be replaced by URI)
 #other_browser_cmd = "some_browser %s"

+# logging: Where log output should go: "stdout", "syslog", "none"
+#logging = "stdout"

 # END SAMPLE CONFIG FILE
 
 Lines beginning with # characters are comments and are ignored by the
 # END SAMPLE CONFIG FILE
 
 Lines beginning with # characters are comments and are ignored by the

-script.
+script.  [Most options correspond directly to an option or option group
+in the configuration UI.]

 
 In continuous mode, Browser Switchboard keeps running in the background
 
 In continuous mode, Browser Switchboard keeps running in the background

-instead of closing after handling each request.  This saves roughly two
-seconds of startup time for each link (on my N800 running Diablo), but
-costs you about 2 MB extra memory.  Continuous mode is disabled by
-default; set continuous_mode to 1 to enable.
+instead of closing after handling each request.  This saves a bit of
+startup time for each link (on my N800 running Diablo), but costs you
+about 100 KB extra memory.  Continuous mode is disabled by default; set
+continuous_mode to 1 to enable.  [This option corresponds to the
+"Optimize Browser Switchboard for" option group in the UI; "Lower memory
+usage" corresponds to continuous_mode off, while "Faster browser startup
+time" corresponds to continuous_mode on.]

 
 The "tear", "microb", "fennec", and "midori" options for default_browser
 
 The "tear", "microb", "fennec", and "midori" options for default_browser

-should be self-explanatory.
+should be self-explanatory.  [These correspond to the options in the
+"Default browser" combo box in the UI.]

 
 If the default browser is "other", Browser Switchboard will run the
 program specified in other_browser_cmd as the default browser, with a
 
 If the default browser is "other", Browser Switchboard will run the
 program specified in other_browser_cmd as the default browser, with a

@@ -96,7 +106,17 @@ of typing in
 
 $ some_browser 'http://www.google.com/'
 
 
 $ some_browser 'http://www.google.com/'
 

-at a shell.
+at a shell.  [In the UI, setting "Default brower" to "Other" activates
+the "Command (%s for URI)" setting, which corresponds to the value of
+other_browser_cmd.]
+
+The logging option controls where Browser Switchboard sends its debug
+logging output to.  You should not need to change this unless you're
+debugging Browser Switchboard, and there is no UI for this option.  The
+default option is "stdout", which means you won't see output unless you
+run Browser Switchboard from the shell.  "syslog" will send the output
+to the system log (assuming you have a syslogd set up on your device),
+and "none" disables debug logging entirely.

 
 
 Browser Switchboard and MicroB's browserd:
 
 
 Browser Switchboard and MicroB's browserd:

@@ -113,43 +133,61 @@ memory, but add a few seconds to MicroB's load time.
 Uninstalling Browser Switchboard:
 
 Remove the Browser Switchboard package using the Application Manager,
 Uninstalling Browser Switchboard:
 
 Remove the Browser Switchboard package using the Application Manager,

-and everything should be back to normal.  A reboot may be necessary for
-changes to take effect -- if you experience problems, try restarting
-your device first.
+and everything should be back to normal.  If you experience problems
+after uninstalling, try restarting your device first; if that fixes
+things, please report this as a bug.

 
 
 
 

-Manual Installation:
+Compiling Browser Switchboard:

 
 

-If for some reason you don't want to use the binary package to install
-Browser Switchboard, you can install it by hand:
-1. Make sure you have the necessary dependencies installed: packages
-python2.5, python2.5-dbus, and python-2.5-gobject.
+If for some reason you don't want to use the prebuilt binary package to
+install Browser Switchboard, you can compile and install by hand:
+1. You will need a copy of the SDK for your device.  Make sure the
+following packages are installed: libdbus-glib-1-dev for
+browser-switchboard; libdbus-1-dev, libgtk2.0-dev, libhildon1-dev,
+hildon-control-panel-dev for the config UI.

 2. Download the source tarball: browser-switchboard_X.Y.orig.tar.gz
 2. Download the source tarball: browser-switchboard_X.Y.orig.tar.gz

-3. Unpack the source tarball on your device:
+3. Unpack the source tarball in your SDK install:
+
+SDK$ tar -xvzf browser-switchboard_X.Y.orig.tar.gz
+SDK$ cd browser-switchboard-X.Y
+
+4. Compile:
+
+SDK$ make diablo
+SDK$ make -C config-ui diablo-plugin
+
+(Replace "diablo" with "fremantle" and "diablo-plugin" with
+"fremantle-plugin" if compiling for Fremantle.
+
+If you want the standalone config application instead of the Control
+Panel plugin, do 
+SDK$ make -C config-ui diablo-hildon-app
+instead.

 
 

-$ tar -xvzf browser-switchboard_X.Y.orig.tar.gz
-$ cd browser-switchboard-X.Y
+If you're using the Scratchbox2-based SDK+, you want
+SDK+$ sb2 make
+etc. as usual.)

 
 

-4. As root on your device, copy the browser-switchboard script to
-/usr/bin:
+5. Install to a temporary directory, and tar up the result:

 
 

-# cp browser-switchboard /usr/bin
+SDK$ make DESTDIR=temp install
+SDK$ make -C config-ui install
+SDK$ cd temp
+SDK$ tar cf stuff.tar .

 
 

-(where # represents a root shell prompt).
-5. As root on your device, copy com.nokia.osso_browser.service to
-/usr/share/dbus-1/services, moving the existing file out of the way
-first:
+6. As root on your device, move files that will be replaced in the
+install process out of the way:

 
 

-# mv /usr/share/dbus-1/services/com.nokia.osso_browser.service
+DEVICE# mv /usr/share/dbus-1/services/com.nokia.osso_browser.service

   /usr/share/dbus-1/services/com.nokia.osso_browser.bak
   /usr/share/dbus-1/services/com.nokia.osso_browser.bak

-# cp com.nokia.osso_browser.service /usr/share/dbus-1/services
+DEVICE# mv /usr/bin/browser /usr/bin/browser.bak

 
 

-6. (optional) If you want running "browser" from the command line to
-work as intended, copy browser to /usr/bin, moving the original symlink
-out of the way first:
+7. Copy the tar file from step 5 to your device, and as root, unpack it
+in the root directory of your device:

 
 

-# mv /usr/bin/browser /usr/bin/browser.bak
-# cp browser /usr/bin
+DEVICE# cd /
+DEVICE# tar xf /path/to/stuff.tar

 
 To uninstall, remove the files you installed, restore the backup copies,
 and reboot your device.
 
 To uninstall, remove the files you installed, restore the backup copies,
 and reboot your device.

@@ -168,10 +206,10 @@ Source code is hosted in a Git (http://git-scm.com/) repository on
 git.maemo.org.  You can get a copy of the current development version by
 cloning the repository:
 
 git.maemo.org.  You can get a copy of the current development version by
 cloning the repository:
 

-$ git clone https://git.maemo.org/projects/browser-switch
+$ git clone http://git.maemo.org/projects/browser-switch

 
 or you can browse the source using gitweb
 
 or you can browse the source using gitweb

-(https://git.maemo.org/projects/browser-switch/?p=browser-switch;a=summary).
+(http://git.maemo.org/projects/browser-switch/?p=browser-switch;a=summary).

 
 
 Maintainer:
 
 
 Maintainer: