X-Git-Url: http://git.maemo.org/git/?p=browser-switch;a=blobdiff_plain;f=README;h=44040af3b9fa7d982c94c6b5e9e6c03816c3eb60;hp=7c0217c19ed1927dc71ef0cbefc04408807e6bbf;hb=13c9c6e00e9ef925340eebc157ca8c8d5d1a00db;hpb=3617d13c14e77d846889d1f4fe2a797715a27e96;ds=sidebyside

diff --git a/README b/README
index 7c0217c..44040af 100644
--- a/README
+++ b/README
@@ -1,10 +1,11 @@
 BROWSER SWITCHBOARD
-version 3.3b1
+version 3.3
 
 Browser Switchboard is a program which allows you to choose which
 browser to use as the default browser. It supports MicroB, Tear,
 Fennec/Mobile Firefox, and Midori out of the box, and can also be used
-to launch MicroB without having browserd running.
+to launch MicroB without having browserd running.  A Control Panel
+applet to choose the default browser is provided.
 
 
 Download:
@@ -15,9 +16,7 @@ page on garage.maemo.org: https://garage.maemo.org/frs/?group_id=1159
 Quick Start:
 1. Download the binary package: browser-switchboard_X.Y-Z_all.deb
 (where X.Y-Z is the version number, of course).
-2. If you're using a Maemo 5 device, make sure all your MicroB browser
-windows are closed.
-3. Install the package using the Application Manager (open the
+2. Install the package using the Application Manager (open the
 Application Manager, then select Application->Install from file in the
 menu).
 
@@ -52,9 +51,9 @@ $ cat > $HOME/.config/browser-switchboard <<EOF
 default_browser = "your_browser"
 EOF
 
-where your_browser can be one of "tear", "microb", "fennec", "midori",
-or "other" (see below for more on the "other" option).  You can of
-course also edit the $HOME/.config/browser-switchboard file with your
+where your_browser can be one of "tear", "microb", "fennec", "opera",
+"midori" or "other" (see below for more on the "other" option).  You can
+of course also edit the $HOME/.config/browser-switchboard file with your
 favorite text editor.
 
 To restore the default behavior, just delete the config file:
@@ -69,9 +68,11 @@ Here's a more complete sample configuration file:
 # BEGIN SAMPLE CONFIG FILE
 # This is a comment
 # continuous_mode: 0 -- close after handling a request; 1 -- run
-# continuously in the background
-continuous_mode = 0
-# default_browser: "tear", "microb", "fennec", "midori", or "other"
+# continuously in the background (default)
+# On Fremantle, this is forced to 1 regardless of config setting
+continuous_mode = 1
+# default_browser: "tear", "microb", "fennec", "midori", "opera" or
+# "other"
 default_browser = "tear"
 # other_browser_cmd: If default browser is "other", what program
 # to run (%s will be replaced by URI)
@@ -92,15 +93,17 @@ in the configuration UI.]
 In continuous mode, Browser Switchboard keeps running in the background
 instead of closing after handling each request.  This saves a bit of
 startup time for each link (on my N800 running Diablo), but costs you
-about 100 KB extra memory.  Continuous mode is disabled by default; set
-continuous_mode to 1 to enable.  [This option corresponds to the
-"Optimize Browser Switchboard for" option group in the UI; "Lower memory
-usage" corresponds to continuous_mode off, while "Faster browser startup
-time" corresponds to continuous_mode on.]
-
-The "tear", "microb", "fennec", and "midori" options for default_browser
-should be self-explanatory.  [These correspond to the options in the
-"Default browser" combo box in the UI.]
+about 150 KB extra memory.  Continuous mode is enabled by default; set
+continuous_mode to 0 to enable.  On Fremantle, continuous mode is always
+enabled regardless of the value of this config setting, to provide
+better compatibility with MicroB's behavior.  [This option corresponds
+to the "Optimize Browser Switchboard for" option group in the UI; "Lower
+memory usage" corresponds to continuous_mode off, while "Faster browser
+startup time" corresponds to continuous_mode on.]
+
+The "tear", "microb", "fennec", "opera" and "midori" options for
+default_browser should be self-explanatory.  [These correspond to the
+options in the "Default browser" combo box in the UI.]
 
 If the default browser is "other", Browser Switchboard will run the
 program specified in other_browser_cmd as the default browser, with a
@@ -124,13 +127,51 @@ to the system log (assuming you have a syslogd set up on your device),
 and "none" disables debug logging entirely.
 
 On Fremantle only, autostart_microb controls whether MicroB is
-prestarted when the device boots.  By default, MicroB is prestarted only
-when MicroB is set as the default browser; you can force MicroB to
+prestarted when the device boots and whether the MicroB browser process
+is left running when no browser windows are open.  By default, MicroB is
+prestarted (and the process left open when no browser windows are open)
+only when MicroB is set as the default browser; you can force MicroB to
 always prestart by setting autostart_microb = 1, while you can force it
 to never prestart by setting autostart_microb = 0.  [This option has no
 corresponding UI at the moment.]
 
 
+The browser-switchboard-config Command-Line Configuration Tool:
+
+A command-line configuration utility is provided to allow programs and
+scripts to query and set Browser Switchboard configuration variables.
+For example,
+
+$ browser-switchboard-config -b
+
+will display the default browser, and 
+
+$ browser-switchboard-config -s -b "opera"
+
+will set the default browser to Opera Mobile.  See the help output from
+running browser-switchboard-config with no arguments for more
+information.
+
+The primary purpose of this tool is to allow browser vendors to provide
+an option in their browsers to set themselves as the default browser,
+via something like this (shell-like pseudocode):
+
+if [ -x /usr/bin/browser-switchboard-config ]; then
+	if [ `browser-switchboard-config -b` = "mybrowser" ]; then
+		display "MyBrowser is the default browser."
+	else
+		button "Make MyBrowser the default browser"
+		action "browser-switchboard-config -s -b mybrowser"
+	fi
+else
+	display "Install Browser Switchboard to make MyBrowser the default browser"
+fi
+
+Browser vendors: setting yourself as the default browser without
+prompting the user first (via package maintainer scripts, for example)
+is strongly discouraged.
+
+
 Browser Switchboard and MicroB's browserd:
 
 MicroB uses a background process called browserd to decrease its load
@@ -167,10 +208,11 @@ SDK$ cd browser-switchboard-X.Y
 4. Compile:
 
 SDK$ make diablo
-SDK$ make -C config-ui diablo-plugin
+SDK$ make -C config-ui diablo-plugin util
 
-(Replace "diablo" with "fremantle" and "diablo-plugin" with
-"fremantle-plugin" if compiling for Fremantle.
+(Replace "diablo" with "fremantle", "diablo-plugin" with
+"fremantle-plugin" and "util" with "fremantle-util" if compiling for
+Fremantle.
 
 If you want the standalone config application instead of the Control
 Panel plugin, do 
@@ -184,10 +226,14 @@ etc. as usual.)
 5. Install to a temporary directory, and tar up the result:
 
 SDK$ make DESTDIR=temp install
-SDK$ make -C config-ui install
+SDK$ make DESTDIR=temp -C config-ui install
 SDK$ cd temp
 SDK$ tar cf stuff.tar .
 
+(On Fremantle, add a
+SDK$ make DESTDIR=temp install-xsession-script
+before creating the tarball.)
+
 6. As root on your device, move files that will be replaced in the
 install process out of the way: