+#
+# $Id: makefile.os2,v 1.50.2.1 2008/02/23 11:21:24 mikulik Exp $
+#
+# GNUPLOT Makefile for use on OS/2 2.x (and above)
+# using emx 0.9 (and above) and GNUMake
+#
+# To compile gnuplot, run the following command in directory gnuplot\src:
+# make -f ..\config\makefile.os2
+#
+
+# The following tools and libraries are recommended/required to use this
+# makefile out of the box:
+# - GNU make, e.g. http://hobbes.nmsu.edu/pub/os2/dev/util/make-3.81beta3-r2-bin.zip
+# - IPFC included in the OS/2 developer kit
+# - emtex is only required for some parts of the documentation
+#
+# - GD library, http://hobbes.nmsu.edu/pub/os2/util/gd-2-0-33.zip
+# - GNU readline, http://os2ports.com/ftp/pub/os2/unix/devtools/readline/readline4.1-os2.zip
+# - PDFlib Lite 6.0 or later compiled for emx (available as source from http://www.pdflib.com/ )
+# - XFree86 libraries, ftp://ftp.netlabs.org/pub/xfree86/4.5.0
+
+# We depend on using cmd.exe (or a compatible one) and the
+# standard OS/2 tool set. (additionally we use 'cat')
+SHELL=cmd.exe
+
+#
+# ***************** Begin of Configuration section ***************************
+#
+
+#
+# Comment out the definition lines to disable the according features:
+#
+
+# X11 driver
+# requires installed XFree86
+X11=1
+
+# GIF, PNG, JPEG device drivers
+# Requires gd library (not part of gnuplot)
+#
+# You can use the following set of options for GD library v2.0 something
+# or newer. This library writes PNG, JPEG and GIF images.
+# If libgd has been compiled with TrueType font support, then you can use
+# scaled TrueType fonts in PNG images. If not, then uncomment FREETYPE.
+# The pre-compiled GD library by Ilya Zakharevich available at
+# http://hobbes.nmsu.edu/pub/os2/util/gd-2-0-33.zip
+# is strongly recommended. This packages already includes the required
+# GD, JPEG and Z and freetype libraries.
+GD=1
+PNG=1
+GIF=1
+JPEG=1
+FREETYPE=1
+
+# PDF device driver
+# requires PDFlib (not part of gnuplot)
+PDF=1
+
+# VESAkit support
+# requires SVGA- and VESA Kit (not part of gnuplot)
+# VESA=1
+
+# GNU_ReadLine support
+# requires GNU readline library (static or DLL; not part of gnuplot)
+# GNU_RL=1
+
+# saving of history (no longer requires GNU readline)
+HISTORY=1
+
+# DEBUGging support
+# creates binaries suitable for debugging. Some bugs may come and go
+# as opposed to a production build since we lower the optimization level
+# DEBUG=1
+
+# MOUSE support for PM and X11 terminals
+MOUSE=1
+
+#
+# ****************** End of Configuration section ****************************
+#
+
+#
+# Miscellaneous setup
+#
+
+.PHONY: all runtime alldocs demo binaries infomin clean veryclean
+.SUFFIXES: .c .trm .o .obj .exe .rc .res .dll
+
+# A reasonable default
+default: runtime
+
+# A basic help screen
+help:
+ @echo " Usage: $(MAKE) -f makefile.os2 target"
+ @echo " where target is one of:"
+ @echo " all runtime alldocs demo binaries infomin help clean veryclean"
+
+#
+# Definitions of flags and symbols used by makefile.all and makefile.os2
+#
+
+# these definitions are used by makefile.all
+T=../term/
+D=../docs/
+L=$(D)latextut/
+M=../demo/
+
+#
+# Definitions valid for all targets on OS/2
+#
+
+OS2DIR = os2
+DOCDIR = ..\docs
+DEMODIR = ..\demo
+TERMDIR = ..\term
+
+
+# where to place gnuplot.gih helpfile
+HELPFILE = $(DOCDIR)\gnuplot.gih
+
+# Where to install the PostScript prologue files, relatively to the executable
+# gnuplot.exe
+GNUPLOT_PS_DIR = share/PostScript
+
+#
+# 3 sets of variables are defined and used to create
+# 1: gnuplot.exe, and utilities
+# 2: gnupmdrv.exe (the PM-driver executable)
+#
+CC = gcc
+CC2 = gcc
+O = o
+O2 = obj
+
+# Flags for compiler and linker under OS/2
+OS2FLAGS = -DOS2
+
+# Flags for compiling with EMX/GCC
+# Special note: -ffloat-store is necessary to avoid some strange behaviour
+# of this code:
+# reset; set key; set xlabel "Year"; set xdata time; set timefmt "%y%m%d"
+# set format x "%y"; set xrange ["900621" : "950126"];
+# plot '-' using 1:2 title 'Fitted IO' with lines 1
+# 900621 20
+# 950126 55
+# e
+# Confirmed for gcc 2.7.x/2.8.x; graphics.c used to be the culprit, but as
+# of today (20010918) it isn't any more ...
+#
+EMXSPECIFIC = -DHAVE_CONFIG_H -ffloat-store
+LIBS =
+
+#
+# Choose flags suitable for a debugging or for a production build
+#
+ifdef DEBUG
+CFLAGS = -g $(OS2FLAGS) $(EMXSPECIFIC) -Wall -Wno-comment -O0 -Zmt
+LDFLAGS = -g -Zmt -Zcrtdll -Zbsd-signals
+CFLAGS2 = -g $(OS2FLAGS) $(EMXSPECIFIC) -Wall -O0 -Zmt -Zomf
+LDFLAGS2 = -g -Zmt -Zcrtdll -Zbsd-signals -Zomf
+else
+CFLAGS = $(OS2FLAGS) $(EMXSPECIFIC) -O4 -mpentium -Wall -Wno-unused -Wno-comment -Zmt
+LDFLAGS = -s -Zmt -Zcrtdll -Zbsd-signals
+CFLAGS2 = $(OS2FLAGS) $(EMXSPECIFIC) -O4 -mpentium -Wall -Wno-unused -Zmt -Zomf
+LDFLAGS2 = -s -Zmt -Zcrtdll -Zbsd-signals -Zomf
+endif
+
+#
+# Settings for the terminals to be included
+#
+TERMFLAGS = -DGNUPLOT_PS_DIR=\"$(GNUPLOT_PS_DIR)\" -I. -I.. -I$(T)
+
+ifdef GD
+ CFLAGS += -DHAVE_LIBGD -DHAVE_GD_H
+ TERMLIBS += -lgd
+ifdef FREETYPE
+ CFLAGS += -DHAVE_GD_TTF
+endif
+ifdef PNG
+ CFLAGS += -DHAVE_GD_PNG
+endif
+ifdef GIF
+ CFLAGS += -DHAVE_GD_GIF -DGIF_ANIMATION
+endif
+ifdef JPEG
+ CFLAGS += -DHAVE_GD_JPEG
+endif
+endif
+
+ifdef PDF
+ TERMFLAGS += -DHAVE_LIBPDF -DHAVE_PDFLIB_H
+ TERMLIBS += -lpdflib
+endif
+
+# SVGA-/VESAkit support
+ifdef VESA
+ TERMFLAGS += -DEMXVESA
+ TERMLIBS += -ljmgraph -lvesa
+endif
+
+# X11 support
+ifdef X11
+ TERMFLAGS += -DX11 -DX11_DRIVER_DIR=\".\"
+endif
+
+# MOUSE support
+ifdef MOUSE
+ TERMFLAGS += -DUSE_MOUSE
+ # the interprocess communication flag OS2_IPC is #defined in config.(os2,h)
+endif
+
+# GNU readline support
+ifdef GNU_RL
+ CFLAGS += -DHAVE_LIBREADLINE
+ LIBS += -lreadline -ltermcap
+endif
+
+# saving history (independent of GNU readline)
+ifdef HISTORY
+ CFLAGS += -DGNUPLOT_HISTORY
+endif
+
+
+# TOOLS
+CPP = cpp
+# Do not name this variable "IPFC"!! This won't work out...
+IPF_C = ipfc.exe
+
+# Tools for buildings the docs
+DVIPS = dvips
+LATEX = latex
+PDFLATEX = vlatex
+PLAINTEX = tex
+
+#
+# Default Rules
+#
+.c.$(O):
+ $(CC) $(CFLAGS) $(TERMFLAGS) -o $*.$(O) -c $*.c
+.c.obj:
+ $(CC2) $(CFLAGS2) $(TERMFLAGS) -o $*.obj -c $*.c
+
+#
+# Include dependencies valid for all platforms from makefile.all
+#
+include makefile.all
+
+
+#
+# Pre-defined sets of targets:
+#
+all: runtime demo
+alldocs: $(DOCDIR)\gnuplot.gih $(DOCDIR)\gnuplot.inf $(DOCDIR)\gnuplot.html \
+ $(DOCDIR)\gnuplot.info $(DOCDIR)\gnuplot.ps \
+ $(DOCDIR)\gnuplot.pdf
+runtime: config.h binaries infomin $(DOCDIR)\gnuplot.inf
+infomin: gnupmdrv.hlp $(DOCDIR)\gnuplot.gih
+demo: $(M)binary1 $(M)binary2 $(M)binary3
+ifdef X11
+binaries: gnuplot.exe gnupmdrv.exe gnuplot_x11.exe
+else
+binaries: gnuplot.exe gnupmdrv.exe
+endif
+
+OBJS = $(COREOBJS) version.$(O)
+
+$(OBJS): config.h
+
+term.$(O): $(CORETERM) term.h config.h $(OS2DIR)\pm_msgs.h
+
+gnuplot.exe: $(OBJS)
+ $(CC) $(LDFLAGS) -o $@ $(OBJS) $(TERMLIBS) $(LIBS)
+
+#
+# Build the PM outboard driver
+#
+$(OS2DIR)\gnupmdrv.$(O2): $(OS2DIR)\gnupmdrv.c $(OS2DIR)\gnupmdrv.h config.h
+$(OS2DIR)\gclient.$(O2): $(OS2DIR)\gclient.c $(OS2DIR)\gnupmdrv.h config.h $(OS2DIR)\pm_msgs.h mouse.h
+$(OS2DIR)\dialogs.$(O2): $(OS2DIR)\dialogs.c $(OS2DIR)\gnupmdrv.h config.h $(OS2DIR)\dialogs.h
+$(OS2DIR)\print.$(O2): $(OS2DIR)\print.c $(OS2DIR)\gnupmdrv.h config.h
+$(OS2DIR)\gpexecute.$(O2): gpexecute.c gpexecute.h
+$(OS2DIR)\gnupmdrv.res : $(OS2DIR)\gnupmdrv.rc $(OS2DIR)\gnuplot.ico $(OS2DIR)\dialogs.h
+ cd $(OS2DIR) && rc -r gnupmdrv.rc & cd ..
+
+OS2OBJ = $(OS2DIR)\gnupmdrv.$(O2) $(OS2DIR)\gclient.$(O2) $(OS2DIR)\print.$(O2) \
+ $(OS2DIR)\dialogs.$(O2) gpexecute.$(O2)
+
+gnupmdrv.exe: $(OS2OBJ) $(OS2DIR)\gnupmdrv.res $(OS2DIR)\gnupmdrv.def
+ $(CC2) $(LDFLAGS2) -o $@ $(OS2OBJ) $(OS2DIR)\gnupmdrv.res $(OS2DIR)\gnupmdrv.def
+
+gnupmdrv.hlp: $(OS2DIR)\gnupmdrv.ipf
+# Cannot use the command
+# $(IPF_C) $< $@
+# because IPFC 2.1 does not support this syntax. Use instead:
+ copy $< . && $(IPF_C) gnupmdrv.ipf && del gnupmdrv.ipf
+
+#
+# Build the X11 outboard driver
+#
+
+# X11 libraries
+X11LIBS = -L$(X11ROOT)/XFree86/lib -lX11 -lsocket -Zbsd-signals -Zcrtdll
+# X11 includes
+X11INCLUDES = -I$(X11ROOT)/XFree86/include
+X11FLAGS= -Zmt -D__UNIXOS2__ -DI_NEED_OS2_H
+ifdef MOUSE
+X11FLAGS += -DUSE_MOUSE
+endif
+
+gnuplot_x11.exe: gplt_x11.o gpexecute.o getcolor_x11.o
+ $(CC) $(LDFLAGS) $(X11FLAGS) $(EMXSPECIFIC) -o $@ -DGPLT_X11_MODE $^ $(X11LIBS)
+
+gplt_x11.o: gplt_x11.c mouse.h gpexecute.h config.h
+ $(CC) $(CFLAGS) $(X11FLAGS) $(EMXSPECIFIC) $(X11INCLUDES) -c -o $@ $<
+
+getcolor_x11.o: getcolor.c
+ $(CC) $(CFLAGS) $(X11FLAGS) $(EMXSPECIFIC) -DGPLT_X11_MODE -c -o $@ $<
+
+#
+# Create config.h
+# This file is preferable over having explicit gcc command longer than 10 lines:
+# gcc ... -DHAVE_ -DHAVE_ ... -DHAVE_ -DHAVE_ ... myfile.c
+#
+config.h: ..\config\config.os2
+ if exist $@ del $@
+ copy $< $@
+
+#
+# Create documentation in various formats
+#
+# The idea behind the renaming business is that we may want to
+# use various LaTeX systems which may choke if they find existing
+# intermediate files from other systems.
+# Call LaTeX three times to get the toc right.
+$(DOCDIR)\gnuplot.dvi: $(DOCDIR)\gnuplot.tex
+ copy $(DOCDIR)\gnuplot.tex $(DOCDIR)\gnuplot_2.tex
+ cd $(DOCDIR) && $(LATEX) gnuplot_2.tex && $(LATEX) gnuplot_2.tex && $(LATEX) gnuplot_2.tex
+ if exist $(DOCDIR)\gnuplot.dvi del $(DOCDIR)\gnuplot.dvi
+ move $(DOCDIR)\gnuplot_2.dvi $(DOCDIR)\gnuplot.dvi
+ del $(DOCDIR)\gnuplot_2.*
+$(DOCDIR)\gnuplot.ps: $(DOCDIR)\gnuplot.dvi
+ $(DVIPS) -o $@ $(DOCDIR)\gnuplot.dvi
+$(DOCDIR)\gnuplot.pdf: $(DOCDIR)\gnuplot.tex
+ copy $(DOCDIR)\gnuplot.tex $(DOCDIR)\gnuplot_3.tex
+ copy $(DOCDIR)\..\VERSION $(DOCDIR)
+ cd $(DOCDIR) && $(PDFLATEX) gnuplot_3.tex && $(PDFLATEX) gnuplot_3.tex && $(PDFLATEX) gnuplot_3.tex
+ if exist $(DOCDIR)\gnuplot.pdf del $(DOCDIR)\gnuplot.pdf
+ move $(DOCDIR)\gnuplot_3.pdf $(DOCDIR)\gnuplot.pdf
+ del $(DOCDIR)\gnuplot_3.*
+$(DOCDIR)\gnuplot.tex: $(DOCDIR)\gnuplot.doc $(DOCDIR)\doc2tex.exe
+ $(DOCDIR)\doc2tex.exe $(DOCDIR)\gnuplot.doc $@
+$(DOCDIR)\gnuplot.inf: $(DOCDIR)\gnuplot.ipf
+# Cannot use the command
+# $(IPF_C) /INF $< $@
+# because IPFC 2.1 does not support this syntax. Use instead:
+ cd $(DOCDIR) && $(IPF_C) /INF gnuplot.ipf
+$(DOCDIR)\gnuplot.gih: $(DOCDIR)\gnuplot.doc $(DOCDIR)\doc2gih.exe
+ $(DOCDIR)\doc2gih.exe $(DOCDIR)\gnuplot.doc $@
+$(DOCDIR)\gnuplot.html: $(DOCDIR)\gnuplot.texi $(DOCDIR)\gnuplot.doc
+ $(MAKEINFO) --html -I$(DOCDIR) $(DOCDIR)\gnuplot.texi --no-split --output=$@
+$(DOCDIR)\gnuplot.info: $(DOCDIR)\gnuplot.texi $@
+ $(MAKEINFO) -I$(DOCDIR) $(DOCDIR)\gnuplot.texi --no-split --output=$@
+# $(DOCDIR)\gnuplot.texi: $(DOCDIR)\gnuplot.doc $(DOCDIR)\doc2texi.pl
+# perl $(DOCDIR)\doc2texi.pl $(DOCDIR)\gnuplot.doc >$@
+$(DOCDIR)\gnuplot.rtf: $(DOCDIR)\gnuplot.doc $(DOCDIR)\doc2rtf.exe
+ $(DOCDIR)\doc2rtf.exe $(DOCDIR)\gnuplot.doc $@
+$(DOCDIR)\gnuplot.ms: $(DOCDIR)\gnuplot.doc $(DOCDIR)\doc2ms.exe
+ $(DOCDIR)\doc2ms.exe $(DOCDIR)\gnuplot.doc $@
+$(DOCDIR)\gnuplot.ipf: $(DOCDIR)\gnuplot.doc $(DOCDIR)\doc2ipf.exe
+ $(DOCDIR)\doc2ipf.exe $(DOCDIR)\gnuplot.doc $@
+# Assume we need A4 format
+$(DOCDIR)\gpcard.ps: $(DOCDIR)\gpcard.dvi
+ cd $(DOCDIR) && $(DVIPS) -o gpcard_letter.ps $<
+ cd $(DOCDIR) && psresize -pletter -Pa4 gpcard_letter.ps $@
+$(DOCDIR)\gpcard.dvi: $(DOCDIR)\gpcard.tex
+ cd $(DOCDIR) && $(PLAINTEX) gpcard.tex && $(PLAINTEX) gpcard.tex
+
+#
+# Tools for converting the documentation from docs\gnuplot.doc
+# in various formats
+#
+
+# Some dependencies - no rule!
+$(DOCDIR)\doc2gih.exe $(DOCDIR)\doc2ipf.exe $(DOCDIR)\doc2info.exe \
+$(DOCDIR)\doc2tex.exe $(DOCDIR)\doc2rtf.exe: \
+ $(DOCDIR)\termdoc.c $(DOCDIR)\xref.c $(DOCDIR)\allterm.h ..\src\config.h
+
+
+SORT_TERMINALS=1
+ifdef SORT_TERMINALS
+# sort alphabetically all terminals
+$(DOCDIR)\allterm.h: $(CORETERM)
+ @echo "Building allterm.h"
+ @..\src\os2\4allterm.cmd sort
+else
+# SORT_TERMINALS==0, then sequence of terminals according to "ls term/*.trm":
+$(DOCDIR)\allterm.h: $(CORETERM)
+ @echo "Building allterm.h"
+ @..\src\os2\4allterm.cmd nosort
+endif
+
+$(DOCDIR)\doc2gih.exe: $(DOCDIR)\doc2gih.c $(DOCDIR)\termdoc.c $(OS2TERM)
+ $(CC) $(CFLAGS) $(TERMFLAGS) -DALL_TERM_DOC -o $@ $(DOCDIR)\doc2gih.c $(DOCDIR)\termdoc.c
+$(DOCDIR)\doc2ipf.exe: $(DOCDIR)\doc2ipf.c $(DOCDIR)\termdoc.c $(DOCDIR)\xref.c $(OS2TERM)
+ $(CC) $(CFLAGS) $(TERMFLAGS) -DALL_TERM_DOC -o $@ $(DOCDIR)\doc2ipf.c $(DOCDIR)\termdoc.c $(DOCDIR)\xref.c
+$(DOCDIR)\doc2tex.exe: $(DOCDIR)\doc2tex.c $(DOCDIR)\termdoc.c $(OS2TERM) $(DOCDIR)\allterm.h
+ $(CC) $(CFLAGS) $(TERMFLAGS) -DALL_TERM_DOC -o $@ $(DOCDIR)\doc2tex.c $(DOCDIR)\termdoc.c
+$(DOCDIR)\doc2rtf.exe: $(DOCDIR)\doc2rtf.c $(DOCDIR)\termdoc.c $(DOCDIR)\xref.c $(OS2TERM)
+ $(CC) $(CFLAGS) $(TERMFLAGS) -DALL_TERM_DOC -o $@ $(DOCDIR)\doc2rtf.c $(DOCDIR)\termdoc.c $(DOCDIR)\xref.c
+$(DOCDIR)\doc2ms.exe: $(DOCDIR)\doc2ms.c $(DOCDIR)\termdoc.c $(OS2TERM)
+ $(CC) $(CFLAGS) $(TERMFLAGS) -DALL_TERM_DOC -o $@ $(DOCDIR)\doc2ms.c $(DOCDIR)\termdoc.c
+#
+# Create binary demo files
+#
+$(M)binary1 $(M)binary2 $(M)binary3: $(M)bf_test.exe
+ cd $(DEMODIR) && bf_test.exe
+
+$(M)bf_test.exe : bf_test.c binary.$(O) alloc.$(O)
+ $(CC) $(CFLAGS) -o $@ bf_test.c binary.$(O) alloc.$(O)
+
+#
+# Clean up
+#
+
+# Clean up all files temporary used
+clean:
+ if exist config.h del config.h
+ if exist *.$(O) del *.$(O)
+ if exist *.$(O2) del *.$(O2)
+ cd $(OS2DIR) && if exist *.$(O2) del *.$(O2)
+ if exist $(OS2DIR)\gnupmdrv.res del $(OS2DIR)\gnupmdrv.res
+ if exist $(DEMODIR)\bf_test.exe del $(DEMODIR)\bf_test.exe
+ if exist $(DOCDIR)\doc2*.exe del $(DOCDIR)\doc2*.exe
+ if exist $(DOCDIR)\gnuplot.ipf del $(DOCDIR)\gnuplot.ipf
+ if exist $(DOCDIR)\gnuplot_2* del $(DOCDIR)\gnuplot_2*
+ if exist $(DOCDIR)\gnuplot_3* del $(DOCDIR)\gnuplot_3*
+ if exist core del core
+ if exist $(DOCDIR)\allterm.? del $(DOCDIR)\allterm.?
+
+# Clean up ALL files that were not part of the source distribution
+veryclean: clean
+ if exist *.exe del *.exe
+ if exist $(DOCDIR)\gnuplot.dvi del $(DOCDIR)\gnuplot.dvi
+ if exist $(DOCDIR)\gnuplot.gih del $(DOCDIR)\gnuplot.gih
+ if exist $(DOCDIR)\gnupmdrv.hlp del $(DOCDIR)\gnupmdrv.hlp
+ if exist $(DOCDIR)\gnuplot.html del $(DOCDIR)\gnuplot.html
+ if exist $(DOCDIR)\gnuplot.inf del $(DOCDIR)\gnuplot.inf
+ if exist $(DOCDIR)\gnuplot.info del $(DOCDIR)\gnuplot.info
+ if exist $(DOCDIR)\gnuplot.ms del $(DOCDIR)\gnuplot.ms
+ if exist $(DOCDIR)\gnuplot.ps del $(DOCDIR)\gnuplot.ps
+ if exist $(DOCDIR)\gnuplot.pdf del $(DOCDIR)\gnuplot.pdf
+ if exist $(DOCDIR)\gnuplot.rtf del $(DOCDIR)\gnuplot.rtf
+ if exist $(DOCDIR)\gnuplot.tex del $(DOCDIR)\gnuplot.tex
+ if exist $(DOCDIR)\gpcard*.ps del $(DOCDIR)\gpcard*.ps
+ if exist $(DOCDIR)\*.dvi del $(DOCDIR)\*.dvi
+ if exist $(DOCDIR)\*.log del $(DOCDIR)\*.log
+ if exist $(DOCDIR)\*.aux del $(DOCDIR)\*.aux
+ if exist $(DOCDIR)\*.toc del $(DOCDIR)\*.toc
+ if exist $(DEMODIR)\binary? del $(DEMODIR)\binary?
+
projects / gnuplot / blobdiff