X-Git-Url: http://git.maemo.org/git/?p=gonvert;a=blobdiff_plain;f=src%2Funit_data.py;h=65400e36595e04f8538f52d1dab4356cc1fa283e;hp=07149729ca2d20d48d9c2e64a9c4f803de0479d8;hb=2b8c6ea724c7073ab8190341e2aeaa38c4441b5e;hpb=b5484e1b85026102f0e4fe5f645381c8379f13c2

diff --git a/src/unit_data.py b/src/unit_data.py
index 0714972..65400e3 100644
--- a/src/unit_data.py
+++ b/src/unit_data.py
@@ -1,9 +1,14 @@
 import math
-import gettext
 
 import converters
 
-_ = gettext.gettext
+try:
+	raise ImportError()
+	import gettext
+except ImportError:
+	_ = lambda x: x
+else:
+	_ = gettext.gettext
 
 
 
@@ -100,13 +105,13 @@ UNIT_DESCRIPTIONS = {
 	_(u"Area"): {
 		".base_unit": _(u"square meter"),
 		_(u"meter diameter circle"):
-		[(converters.f, ('pi*(x/2.0)**2', '2.0*(x/pi)**(0.5)')), "m dia.", _(u"Type the diameter of the circle in meters to find its area displayed in other fields.")],
+		[(converters.f, ('math.pi*(x/2.0)**2', '2.0*(x/math.pi)**(0.5)')), "m dia.", _(u"Type the diameter of the circle in meters to find its area displayed in other fields.")],
 		_(u"centimeter diameter circle"):
-		[(converters.f, ('pi*(x/200.0)**2', '200.0*(x/pi)**(0.5)')), "cm dia.", _(u"Type the diameter of the circle in centimeters to find its area displayed in other fields.")],
+		[(converters.f, ('math.pi*(x/200.0)**2', '200.0*(x/math.pi)**(0.5)')), "cm dia.", _(u"Type the diameter of the circle in centimeters to find its area displayed in other fields.")],
 		_(u"inch diameter circle"):
-		[(converters.f, ('pi*(((x*(25.4/1000))/2.0) )**2', '1000/25.4 * 2.0*(x/pi)**(0.5)')), "in dia.", _(u"Type the diameter of the circle in inches to find its area displayed in other fields.")],
+		[(converters.f, ('math.pi*(((x*(25.4/1000))/2.0) )**2', '1000/25.4 * 2.0*(x/math.pi)**(0.5)')), "in dia.", _(u"Type the diameter of the circle in inches to find its area displayed in other fields.")],
 		_(u"foot diameter circle"):
-		[(converters.f, ('pi*(((x*((12*25.4)/1000))/2.0) )**2', '1000/(12*25.4) * 2.0*(x/pi)**(0.5)')), "ft dia.", _(u"Type the diameter of the circle in feet to find its area displayed in other fields.")],
+		[(converters.f, ('math.pi*(((x*((12*25.4)/1000))/2.0) )**2', '1000/(12*25.4) * 2.0*(x/math.pi)**(0.5)')), "ft dia.", _(u"Type the diameter of the circle in feet to find its area displayed in other fields.")],
 		_(u"are"):
 		[(converters.m, 100.0), '', _(u"The unit of superficial measure, being a square of which each side is ten meters in length; 100 square meters, or about 119.6 square yards.")],
 		_(u"acre"):
@@ -2184,14 +2189,40 @@ _(u"Electrical Voltage"): {".base_unit": _(u"volt"),
 		_(u"pony"):
 		[(converters.m, 25.0), "", """Equal to twenty five pounds sterling"""],
 	},
+
+	_(u"Radioactivity"): {
+		".base_unit": "becquerel",
+		_(u"becquerel"):
+		[(converters.m, 1.0), u"Bq", 'The SI derived unit of radioactivity.'],
+		_(u"curie"):
+		[(converters.m, 3.7e10), u"Ci", 'Roughly the activity of 1 gram of the radium isotope 226 Ra.'],
+		_(u"pico curie"):
+		[(converters.m, 3.7e-2), u"pCi", ''],
+	},
+
+	_(u"Radiation dose"): {
+		".base_unit": "Sievert",
+		_(u"Sievert"):
+		[(converters.m, 1.0), u"Sv", ''],
+		_(u"milli Sievert"):
+		[(converters.m, 1.0e-3), u"mSv", ''],
+		_(u"micro Sievert"):
+		[(converters.m, 1.0e-6), u"\xb5Sv", ''],
+		_(u"rem"):
+		[(converters.m, 0.01), u"rem", ''],
+		_(u"milli rem"):
+		[(converters.m, 1.0e-5), u"mrem", ''],
+		_(u"roentgen"):
+		[(converters.m, 1/1.07185e2), u"R", ''],
+	},
 }
 
 
 UNIT_CATEGORIES = sorted(UNIT_DESCRIPTIONS.iterkeys())
 
 
-def get_units(category):
-	units = sorted(UNIT_DESCRIPTIONS[category].iterkeys())
+def get_units(categoryName):
+	units = sorted(UNIT_DESCRIPTIONS[categoryName].iterkeys())
 
 	# do not display .base_unit description key
 	del units[0]
@@ -2199,6 +2230,23 @@ def get_units(category):
 	return units
 
 
+def get_units_from_category(category):
+	units = sorted(category.iterkeys())
+
+	# do not display .base_unit description key
+	del units[0]
+
+	return units
+
+
+def get_base_unit(categoryName):
+	return UNIT_DESCRIPTIONS[categoryName][".base_unit"]
+
+
+def get_base_unit_from_category(category):
+	return category[".base_unit"]
+
+
 future_dic = {
 	_(u"Wire Gauge"): {
 		".base_unit": "circular mils",