1 # Makefile.in generated by automake 1.11 from Makefile.am.
4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5 # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
7 # This Makefile.in is free software; the Free Software Foundation
8 # gives unlimited permission to copy and/or distribute it,
9 # with or without modifications, as long as this notice is preserved.
11 # This program is distributed in the hope that it will be useful,
12 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
18 pkgdatadir = $(datadir)/@PACKAGE@
19 pkgincludedir = $(includedir)/@PACKAGE@
20 pkglibdir = $(libdir)/@PACKAGE@
21 pkglibexecdir = $(libexecdir)/@PACKAGE@
22 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
23 install_sh_DATA = $(install_sh) -c -m 644
24 install_sh_PROGRAM = $(install_sh) -c
25 install_sh_SCRIPT = $(install_sh) -c
26 INSTALL_HEADER = $(INSTALL_DATA)
27 transform = $(program_transform_name)
34 build_triplet = @build@
36 target_triplet = @target@
38 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
39 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
40 am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
41 $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \
42 $(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/lib-ld.m4 \
43 $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
44 $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
45 $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
46 $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
47 $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
48 $(top_srcdir)/configure.ac
49 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
51 mkinstalldirs = $(install_sh) -d
52 CONFIG_HEADER = $(top_builddir)/config.h
54 CONFIG_CLEAN_VPATH_FILES =
57 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
58 html-recursive info-recursive install-data-recursive \
59 install-dvi-recursive install-exec-recursive \
60 install-html-recursive install-info-recursive \
61 install-pdf-recursive install-ps-recursive install-recursive \
62 installcheck-recursive installdirs-recursive pdf-recursive \
63 ps-recursive uninstall-recursive
64 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
65 distclean-recursive maintainer-clean-recursive
66 AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
67 $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
71 DIST_SUBDIRS = $(SUBDIRS)
72 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
75 sed_first='s,^\([^/]*\)/.*$$,\1,'; \
76 sed_rest='s,^[^/]*/*,,'; \
77 sed_last='s,^.*/\([^/]*\)$$,\1,'; \
78 sed_butlast='s,/*[^/]*$$,,'; \
79 while test -n "$$dir1"; do \
80 first=`echo "$$dir1" | sed -e "$$sed_first"`; \
81 if test "$$first" != "."; then \
82 if test "$$first" = ".."; then \
83 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
84 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
86 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
87 if test "$$first2" = "$$first"; then \
88 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
92 dir0="$$dir0"/"$$first"; \
95 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
99 ALL_LINGUAS = @ALL_LINGUAS@
102 AUTOCONF = @AUTOCONF@
103 AUTOHEADER = @AUTOHEADER@
104 AUTOMAKE = @AUTOMAKE@
106 BOOST_CPPFLAGS = @BOOST_CPPFLAGS@
107 CATALOGS = @CATALOGS@
108 CATOBJEXT = @CATOBJEXT@
110 CCDEPMODE = @CCDEPMODE@
113 CPPFLAGS = @CPPFLAGS@
116 CXXDEPMODE = @CXXDEPMODE@
117 CXXFLAGS = @CXXFLAGS@
118 CYGPATH_W = @CYGPATH_W@
119 DATADIRNAME = @DATADIRNAME@
122 DSYMUTIL = @DSYMUTIL@
130 GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
131 GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
132 GLIBMM_CFLAGS = @GLIBMM_CFLAGS@
133 GLIBMM_LIBS = @GLIBMM_LIBS@
134 GMOFILES = @GMOFILES@
136 GMSGFMT_015 = @GMSGFMT_015@
138 GTKMM_CFLAGS = @GTKMM_CFLAGS@
139 GTKMM_LIBS = @GTKMM_LIBS@
142 INSTALL_DATA = @INSTALL_DATA@
143 INSTALL_PROGRAM = @INSTALL_PROGRAM@
144 INSTALL_SCRIPT = @INSTALL_SCRIPT@
145 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
146 INSTOBJEXT = @INSTOBJEXT@
147 INTLLIBS = @INTLLIBS@
148 INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@
149 INTLTOOL_MERGE = @INTLTOOL_MERGE@
150 INTLTOOL_PERL = @INTLTOOL_PERL@
151 INTLTOOL_UPDATE = @INTLTOOL_UPDATE@
152 INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
155 LIBGNET_CFLAGS = @LIBGNET_CFLAGS@
156 LIBGNET_LIBS = @LIBGNET_LIBS@
157 LIBICONV = @LIBICONV@
161 LIBSIGC_CFLAGS = @LIBSIGC_CFLAGS@
162 LIBSIGC_LIBS = @LIBSIGC_LIBS@
166 LORDSAWAR_DATADIR = @LORDSAWAR_DATADIR@
167 LTLIBICONV = @LTLIBICONV@
168 LTLIBINTL = @LTLIBINTL@
169 LTLIBOBJS = @LTLIBOBJS@
170 MAKEINFO = @MAKEINFO@
172 MKINSTALLDIRS = @MKINSTALLDIRS@
174 MSGFMT_015 = @MSGFMT_015@
175 MSGFMT_OPTS = @MSGFMT_OPTS@
176 MSGMERGE = @MSGMERGE@
184 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
185 PACKAGE_NAME = @PACKAGE_NAME@
186 PACKAGE_STRING = @PACKAGE_STRING@
187 PACKAGE_TARNAME = @PACKAGE_TARNAME@
188 PACKAGE_URL = @PACKAGE_URL@
189 PACKAGE_VERSION = @PACKAGE_VERSION@
190 PATH_SEPARATOR = @PATH_SEPARATOR@
191 PKG_CONFIG = @PKG_CONFIG@
194 PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@
195 PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@
196 PROGRAMNAME_LOCALEDIR = @PROGRAMNAME_LOCALEDIR@
198 SCREEN_RESOLUTION = @SCREEN_RESOLUTION@
199 SDLSOUND_LIBS = @SDLSOUND_LIBS@
200 SDL_CFLAGS = @SDL_CFLAGS@
201 SDL_CONFIG = @SDL_CONFIG@
202 SDL_LIBS = @SDL_LIBS@
204 SET_MAKE = @SET_MAKE@
209 XGETTEXT = @XGETTEXT@
210 XGETTEXT_015 = @XGETTEXT_015@
211 XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
212 ZIP_FILES = @ZIP_FILES@
213 abs_builddir = @abs_builddir@
214 abs_srcdir = @abs_srcdir@
215 abs_top_builddir = @abs_top_builddir@
216 abs_top_srcdir = @abs_top_srcdir@
217 ac_ct_CC = @ac_ct_CC@
218 ac_ct_CXX = @ac_ct_CXX@
219 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
220 am__include = @am__include@
221 am__leading_dot = @am__leading_dot@
222 am__quote = @am__quote@
224 am__untar = @am__untar@
227 build_alias = @build_alias@
228 build_cpu = @build_cpu@
229 build_os = @build_os@
230 build_vendor = @build_vendor@
231 builddir = @builddir@
233 datarootdir = @datarootdir@
236 exec_prefix = @exec_prefix@
238 host_alias = @host_alias@
239 host_cpu = @host_cpu@
241 host_vendor = @host_vendor@
243 includedir = @includedir@
245 install_sh = @install_sh@
247 libexecdir = @libexecdir@
248 localedir = @localedir@
249 localstatedir = @localstatedir@
253 oldincludedir = @oldincludedir@
256 program_transform_name = @program_transform_name@
259 sharedstatedir = @sharedstatedir@
261 sysconfdir = @sysconfdir@
263 target_alias = @target_alias@
264 target_cpu = @target_cpu@
265 target_os = @target_os@
266 target_vendor = @target_vendor@
267 top_build_prefix = @top_build_prefix@
268 top_builddir = @top_builddir@
269 top_srcdir = @top_srcdir@
270 SUBDIRS = default bigdefault stark bigstark wesnoth bigwesnoth
271 MAINTAINERCLEANFILES = Makefile.in
275 $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
277 case '$(am__configure_deps)' in \
279 ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
280 && { if test -f $@; then exit 0; else break; fi; }; \
284 echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu dat/tilesets/Makefile'; \
285 $(am__cd) $(top_srcdir) && \
286 $(AUTOMAKE) --gnu dat/tilesets/Makefile
288 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
291 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
293 echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
294 cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
297 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
298 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
300 $(top_srcdir)/configure: $(am__configure_deps)
301 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
302 $(ACLOCAL_M4): $(am__aclocal_m4_deps)
303 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
304 $(am__aclocal_m4_deps):
312 # This directory's subdirectories are mostly independent; you can cd
313 # into them and run `make' without going through this Makefile.
314 # To change the values of `make' variables: instead of editing Makefiles,
315 # (1) if the variable is set in `config.status', edit `config.status'
316 # (which will cause the Makefiles to be regenerated when you run `make');
317 # (2) otherwise, pass the desired values on the `make' command line.
318 $(RECURSIVE_TARGETS):
320 for f in x $$MAKEFLAGS; do \
323 *k*) failcom='fail=yes';; \
327 target=`echo $@ | sed s/-recursive//`; \
328 list='$(SUBDIRS)'; for subdir in $$list; do \
329 echo "Making $$target in $$subdir"; \
330 if test "$$subdir" = "."; then \
332 local_target="$$target-am"; \
334 local_target="$$target"; \
336 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
339 if test "$$dot_seen" = "no"; then \
340 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
343 $(RECURSIVE_CLEAN_TARGETS):
345 for f in x $$MAKEFLAGS; do \
348 *k*) failcom='fail=yes';; \
353 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
354 *) list='$(SUBDIRS)' ;; \
356 rev=''; for subdir in $$list; do \
357 if test "$$subdir" = "."; then :; else \
358 rev="$$subdir $$rev"; \
362 target=`echo $@ | sed s/-recursive//`; \
363 for subdir in $$rev; do \
364 echo "Making $$target in $$subdir"; \
365 if test "$$subdir" = "."; then \
366 local_target="$$target-am"; \
368 local_target="$$target"; \
370 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
372 done && test -z "$$fail"
374 list='$(SUBDIRS)'; for subdir in $$list; do \
375 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
378 list='$(SUBDIRS)'; for subdir in $$list; do \
379 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
382 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
383 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
384 unique=`for i in $$list; do \
385 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
387 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
388 END { if (nonempty) { for (i in files) print i; }; }'`; \
392 TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
393 $(TAGS_FILES) $(LISP)
396 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
397 include_option=--etags-include; \
400 include_option=--include; \
403 list='$(SUBDIRS)'; for subdir in $$list; do \
404 if test "$$subdir" = .; then :; else \
405 test ! -f $$subdir/TAGS || \
406 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
409 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
410 unique=`for i in $$list; do \
411 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
413 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
414 END { if (nonempty) { for (i in files) print i; }; }'`; \
416 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
417 test -n "$$unique" || unique=$$empty_fix; \
418 if test $$# -gt 0; then \
419 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
422 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
427 CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
428 $(TAGS_FILES) $(LISP)
429 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
430 unique=`for i in $$list; do \
431 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
433 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
434 END { if (nonempty) { for (i in files) print i; }; }'`; \
435 test -z "$(CTAGS_ARGS)$$unique" \
436 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
440 here=`$(am__cd) $(top_builddir) && pwd` \
441 && $(am__cd) $(top_srcdir) \
442 && gtags -i $(GTAGS_ARGS) "$$here"
445 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
447 distdir: $(DISTFILES)
448 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
449 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
450 list='$(DISTFILES)'; \
451 dist_files=`for file in $$list; do echo $$file; done | \
452 sed -e "s|^$$srcdirstrip/||;t" \
453 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
454 case $$dist_files in \
455 */*) $(MKDIR_P) `echo "$$dist_files" | \
456 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
459 for file in $$dist_files; do \
460 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
461 if test -d $$d/$$file; then \
462 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
463 if test -d "$(distdir)/$$file"; then \
464 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
466 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
467 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
468 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
470 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
472 test -f "$(distdir)/$$file" \
473 || cp -p $$d/$$file "$(distdir)/$$file" \
477 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
478 if test "$$subdir" = .; then :; else \
479 test -d "$(distdir)/$$subdir" \
480 || $(MKDIR_P) "$(distdir)/$$subdir" \
484 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
485 if test "$$subdir" = .; then :; else \
486 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
488 new_distdir=$$reldir; \
489 dir1=$$subdir; dir2="$(top_distdir)"; \
491 new_top_distdir=$$reldir; \
492 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
493 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
494 ($(am__cd) $$subdir && \
495 $(MAKE) $(AM_MAKEFLAGS) \
496 top_distdir="$$new_top_distdir" \
497 distdir="$$new_distdir" \
498 am__remove_distdir=: \
499 am__skip_length_check=: \
500 am__skip_mode_fix=: \
506 check: check-recursive
508 installdirs: installdirs-recursive
510 install: install-recursive
511 install-exec: install-exec-recursive
512 install-data: install-data-recursive
513 uninstall: uninstall-recursive
516 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
518 installcheck: installcheck-recursive
520 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
521 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
522 `test -z '$(STRIP)' || \
523 echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
529 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
530 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
532 maintainer-clean-generic:
533 @echo "This command is intended for maintainers to use"
534 @echo "it deletes files that may require special tools to rebuild."
535 -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
536 clean: clean-recursive
538 clean-am: clean-generic clean-libtool mostlyclean-am
540 distclean: distclean-recursive
542 distclean-am: clean-am distclean-generic distclean-tags
558 install-dvi: install-dvi-recursive
564 install-html: install-html-recursive
568 install-info: install-info-recursive
574 install-pdf: install-pdf-recursive
578 install-ps: install-ps-recursive
584 maintainer-clean: maintainer-clean-recursive
586 maintainer-clean-am: distclean-am maintainer-clean-generic
588 mostlyclean: mostlyclean-recursive
590 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
602 .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
603 install-am install-strip tags-recursive
605 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
606 all all-am check check-am clean clean-generic clean-libtool \
607 ctags ctags-recursive distclean distclean-generic \
608 distclean-libtool distclean-tags distdir dvi dvi-am html \
609 html-am info info-am install install-am install-data \
610 install-data-am install-dvi install-dvi-am install-exec \
611 install-exec-am install-html install-html-am install-info \
612 install-info-am install-man install-pdf install-pdf-am \
613 install-ps install-ps-am install-strip installcheck \
614 installcheck-am installdirs installdirs-am maintainer-clean \
615 maintainer-clean-generic mostlyclean mostlyclean-generic \
616 mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
617 uninstall uninstall-am
620 # Tell versions [3.59,3.63) of GNU make to not export all variables.
621 # Otherwise a system limit (for SysV at least) may be exceeded.