/* This is the contributed code: File: cvcap_v4l.cpp Current Location: ../opencv-0.9.6/otherlibs/highgui Original Version: 2003-03-12 Magnus Lundin lundin@mlu.mine.nu Original Comments: ML:This set of files adds support for firevre and usb cameras. First it tries to install a firewire camera, if that fails it tries a v4l/USB camera It has been tested with the motempl sample program First Patch: August 24, 2004 Travis Wood TravisOCV@tkwood.com For Release: OpenCV-Linux Beta4 opencv-0.9.6 Tested On: LMLBT44 with 8 video inputs Problems? Post problems/fixes to OpenCV group on groups.yahoo.com Patched Comments: TW: The cv cam utils that came with the initial release of OpenCV for LINUX Beta4 were not working. I have rewritten them so they work for me. At the same time, trying to keep the original code as ML wrote it as unchanged as possible. No one likes to debug someone elses code, so I resisted changes as much as possible. I have tried to keep the same "ideas" where applicable, that is, where I could figure out what the previous author intended. Some areas I just could not help myself and had to "spiffy-it-up" my way. These drivers should work with other V4L frame capture cards other then my bttv driven frame capture card. Re Written driver for standard V4L mode. Tested using LMLBT44 video capture card. Standard bttv drivers are on the LMLBT44 with up to 8 Inputs. This utility was written with the help of the document: http://pages.cpsc.ucalgary.ca/~sayles/VFL_HowTo as a general guide for interfacing into the V4l standard. Made the index value passed for icvOpenCAM_V4L(index) be the number of the video device source in the /dev tree. The -1 uses original /dev/video. Index Device 0 /dev/video0 1 /dev/video1 2 /dev/video2 3 /dev/video3 ... 7 /dev/video7 with -1 /dev/video TW: You can select any video source, but this package was limited from the start to only ONE camera opened at any ONE time. This is an original program limitation. If you are interested, I will make my version available to other OpenCV users. The big difference in mine is you may pass the camera number as part of the cv argument, but this convention is non standard for current OpenCV calls and the camera number is not currently passed into the called routine. Second Patch: August 28, 2004 Sfuncia Fabio fiblan@yahoo.it For Release: OpenCV-Linux Beta4 Opencv-0.9.6 FS: this patch fix not sequential index of device (unplugged device), and real numCameras. for -1 index (icvOpenCAM_V4L) i dont use /dev/video but real device available, because if /dev/video is a link to /dev/video0 and i unplugged device on /dev/video0, /dev/video is a bad link. I search the first available device with indexList. Third Patch: December 9, 2004 Frederic Devernay Frederic.Devernay@inria.fr For Release: OpenCV-Linux Beta4 Opencv-0.9.6 [FD] I modified the following: - handle YUV420P, YUV420, and YUV411P palettes (for many webcams) without using floating-point - cvGrabFrame should not wait for the end of the first frame, and should return quickly (see highgui doc) - cvRetrieveFrame should in turn wait for the end of frame capture, and should not trigger the capture of the next frame (the user choses when to do it using GrabFrame) To get the old behavior, re-call cvRetrieveFrame just after cvGrabFrame. - having global bufferIndex and FirstCapture variables makes the code non-reentrant (e.g. when using several cameras), put these in the CvCapture struct. - according to V4L HowTo, incrementing the buffer index must be done before VIDIOCMCAPTURE. - the VID_TYPE_SCALES stuff from V4L HowTo is wrong: image size can be changed even if the hardware does not support scaling (e.g. webcams can have several resolutions available). Just don't try to set the size at 640x480 if the hardware supports scaling: open with the default (probably best) image size, and let the user scale it using SetProperty. - image size can be changed by two subsequent calls to SetProperty (for width and height) - bug fix: if the image size changes, realloc the new image only when it is grabbed - issue errors only when necessary, fix error message formatting. Fourth Patch: Sept 7, 2005 Csaba Kertesz sign@freemail.hu For Release: OpenCV-Linux Beta5 OpenCV-0.9.7 I modified the following: - Additional Video4Linux2 support :) - Use mmap functions (v4l2) - New methods are internal: try_palette_v4l2 -> rewrite try_palette for v4l2 mainloop_v4l2, read_image_v4l2 -> this methods are moved from official v4l2 capture.c example try_init_v4l -> device v4l initialisation try_init_v4l2 -> device v4l2 initialisation autosetup_capture_mode_v4l -> autodetect capture modes for v4l autosetup_capture_mode_v4l2 -> autodetect capture modes for v4l2 - Modifications are according with Video4Linux old codes - Video4Linux handling is automatically if it does not recognize a Video4Linux2 device - Tested succesful with Logitech Quickcam Express (V4L), Creative Vista (V4L) and Genius VideoCam Notebook (V4L2) - Correct source lines with compiler warning messages - Information message from v4l/v4l2 detection Fifth Patch: Sept 7, 2005 Csaba Kertesz sign@freemail.hu For Release: OpenCV-Linux Beta5 OpenCV-0.9.7 I modified the following: - SN9C10x chip based webcams support - New methods are internal: bayer2rgb24, sonix_decompress -> decoder routines for SN9C10x decoding from Takafumi Mizuno with his pleasure :) - Tested succesful with Genius VideoCam Notebook (V4L2) Sixth Patch: Sept 10, 2005 Csaba Kertesz sign@freemail.hu For Release: OpenCV-Linux Beta5 OpenCV-0.9.7 I added the following: - Add capture control support (hue, saturation, brightness, contrast, gain) - Get and change V4L capture controls (hue, saturation, brightness, contrast) - New method is internal: icvSetControl -> set capture controls - Tested succesful with Creative Vista (V4L) Seventh Patch: Sept 10, 2005 Csaba Kertesz sign@freemail.hu For Release: OpenCV-Linux Beta5 OpenCV-0.9.7 I added the following: - Detect, get and change V4L2 capture controls (hue, saturation, brightness, contrast, gain) - New methods are internal: v4l2_scan_controls_enumerate_menu, v4l2_scan_controls -> detect capture control intervals - Tested succesful with Genius VideoCam Notebook (V4L2) 8th patch: Jan 5, 2006, Olivier.Bornet@idiap.ch Add support of V4L2_PIX_FMT_YUYV and V4L2_PIX_FMT_MJPEG. With this patch, new webcams of Logitech, like QuickCam Fusion works. Note: For use these webcams, look at the UVC driver at http://linux-uvc.berlios.de/ 9th patch: Mar 4, 2006, Olivier.Bornet@idiap.ch - try V4L2 before V4L, because some devices are V4L2 by default, but they try to implement the V4L compatibility layer. So, I think this is better to support V4L2 before V4L. - better separation between V4L2 and V4L initialization. (this was needed to support some drivers working, but not fully with V4L2. (so, we do not know when we need to switch from V4L2 to V4L. make & enjoy! */ /*M/////////////////////////////////////////////////////////////////////////////////////// // // IMPORTANT: READ BEFORE DOWNLOADING, COPYING, INSTALLING OR USING. // // By downloading, copying, installing or using the software you agree to this license. // If you do not agree to this license, do not download, install, // copy or use the software. // // // Intel License Agreement // For Open Source Computer Vision Library // // Copyright (C) 2000, Intel Corporation, all rights reserved. // Third party copyrights are property of their respective owners. // // Redistribution and use in source and binary forms, with or without modification, // are permitted provided that the following conditions are met: // // * Redistribution's of source code must retain the above copyright notice, // this list of conditions and the following disclaimer. // // * Redistribution's in binary form must reproduce the above copyright notice, // this list of conditions and the following disclaimer in the documentation // and/or other materials provided with the distribution. // // * The name of Intel Corporation may not be used to endorse or promote products // derived from this software without specific prior written permission. // // This software is provided by the copyright holders and contributors "as is" and // any express or implied warranties, including, but not limited to, the implied // warranties of merchantability and fitness for a particular purpose are disclaimed. // In no event shall the Intel Corporation or contributors be liable for any direct, // indirect, incidental, special, exemplary, or consequential damages // (including, but not limited to, procurement of substitute goods or services; // loss of use, data, or profits; or business interruption) however caused // and on any theory of liability, whether in contract, strict liability, // or tort (including negligence or otherwise) arising in any way out of // the use of this software, even if advised of the possibility of such damage. // //M*/ #include "_highgui.h" #if !defined WIN32 && defined HAVE_CAMV4L #define CLEAR(x) memset (&(x), 0, sizeof (x)) #include #include #include #include #include #include #include #include #include #include #include /* for videodev2.h */ #include #include #include #ifdef HAVE_CAMV4L2 #include #endif /* Defaults - If your board can do better, set it here. Set for the most common type inputs. */ #define DEFAULT_V4L_WIDTH 640 #define DEFAULT_V4L_HEIGHT 480 #define CHANNEL_NUMBER 1 #define MAX_CAMERAS 8 #define MAX_DEVICE_DRIVER_NAME 80 /* Device Capture Objects */ #ifdef HAVE_CAMV4L2 /* V4L2 structure */ struct buffer { void * start; size_t length; }; static unsigned int n_buffers = 0; /* Additional V4L2 pixelformats support for Sonix SN9C10x base webcams */ #ifndef V4L2_PIX_FMT_SBGGR8 #define V4L2_PIX_FMT_SBGGR8 v4l2_fourcc('B','A','8','1') /* 8 BGBG.. GRGR.. */ #endif #ifndef V4L2_PIX_FMT_SN9C10X #define V4L2_PIX_FMT_SN9C10X v4l2_fourcc('S','9','1','0') /* SN9C10x cmpr. */ #endif #endif /* HAVE_CAMV4L2 */ int PALETTE_BGR24 = 0, PALETTE_YVU420 = 0, PALETTE_YUV411P = 0, PALETTE_YUYV = 0, PALETTE_UYVY= 0, PALETTE_SBGGR8 = 0, PALETTE_SN9C10X = 0, PALETTE_MJPEG = 0; typedef struct CvCaptureCAM_V4L { int deviceHandle; int bufferIndex; int FirstCapture; struct video_capability capability; struct video_window captureWindow; struct video_picture imageProperties; struct video_mbuf memoryBuffer; struct video_mmap *mmaps; char *memoryMap; IplImage frame; #ifdef HAVE_CAMV4L2 /* V4L2 variables */ buffer buffers[10]; struct v4l2_capability cap; struct v4l2_input inp; struct v4l2_format form; struct v4l2_crop crop; struct v4l2_cropcap cropcap; struct v4l2_requestbuffers req; struct v4l2_jpegcompression compr; struct v4l2_control control; enum v4l2_buf_type type; struct v4l2_queryctrl queryctrl; struct v4l2_querymenu querymenu; /* V4L2 control variables */ int v4l2_brightness, v4l2_brightness_min, v4l2_brightness_max; int v4l2_contrast, v4l2_contrast_min, v4l2_contrast_max; int v4l2_saturation, v4l2_saturation_min, v4l2_saturation_max; int v4l2_hue, v4l2_hue_min, v4l2_hue_max; int v4l2_gain, v4l2_gain_min, v4l2_gain_max; #endif /* HAVE_CAMV4L2 */ } CvCaptureCAM_V4L; #ifdef HAVE_CAMV4L2 int V4L2_SUPPORT = 0; #endif /* HAVE_CAMV4L2 */ static void icvCloseCAM_V4L( CvCaptureCAM_V4L* capture ); static int icvGrabFrameCAM_V4L( CvCaptureCAM_V4L* capture ); static IplImage* icvRetrieveFrameCAM_V4L( CvCaptureCAM_V4L* capture ); static double icvGetPropertyCAM_V4L( CvCaptureCAM_V4L* capture, int property_id ); static int icvSetPropertyCAM_V4L( CvCaptureCAM_V4L* capture, int property_id, double value ); static int icvSetVideoSize( CvCaptureCAM_V4L* capture, int w, int h); /*********************** Implementations ***************************************/ static int numCameras = 0; static int indexList = 0; #ifdef HAVE_CAMV4L2 // IOCTL handling for V4L2 static int xioctl( int fd, int request, void *arg) { int r; do r = ioctl (fd, request, arg); while (-1 == r && EINTR == errno); return r; } #endif /* HAVE_CAMV4L2 */ /* Simple test program: Find number of Video Sources available. Start from 0 and go to MAX_CAMERAS while checking for the device with that name. If it fails on the first attempt of /dev/video0, then check if /dev/video is valid. Returns the global numCameras with the correct value (we hope) */ static void icvInitCapture_V4L() { int deviceHandle; int CameraNumber; char deviceName[MAX_DEVICE_DRIVER_NAME]; CameraNumber = 0; while(CameraNumber < MAX_CAMERAS) { /* Print the CameraNumber at the end of the string with a width of one character */ sprintf(deviceName, "/dev/video%1d", CameraNumber); /* Test using an open to see if this new device name really does exists. */ deviceHandle = open(deviceName, O_RDONLY); if (deviceHandle != -1) { /* This device does indeed exist - add it to the total so far */ // add indexList indexList|=(1 << CameraNumber); numCameras++; } close(deviceHandle); /* Set up to test the next /dev/video source in line */ CameraNumber++; } /* End while */ }; /* End icvInitCapture_V4L */ static int try_palette(int fd, struct video_picture *cam_pic, int pal, int depth) { cam_pic->palette = pal; cam_pic->depth = depth; if (ioctl(fd, VIDIOCSPICT, cam_pic) < 0) return 0; if (ioctl(fd, VIDIOCGPICT, cam_pic) < 0) return 0; if (cam_pic->palette == pal) return 1; return 0; } #ifdef HAVE_CAMV4L2 static int try_palette_v4l2(CvCaptureCAM_V4L* capture, unsigned long colorspace) { CLEAR (capture->form); capture->form.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; capture->form.fmt.pix.pixelformat = colorspace; capture->form.fmt.pix.field = V4L2_FIELD_ANY; capture->form.fmt.pix.width = DEFAULT_V4L_WIDTH; capture->form.fmt.pix.height = DEFAULT_V4L_HEIGHT; if (-1 == xioctl (capture->deviceHandle, VIDIOC_S_FMT, &capture->form)) return -1; if (colorspace != capture->form.fmt.pix.pixelformat) return -1; else return 0; } #endif /* HAVE_CAMV4L2 */ static int try_init_v4l(CvCaptureCAM_V4L* capture, char *deviceName) { // if detect = -1 then unable to open device // if detect = 0 then detected nothing // if detect = 1 then V4L device int detect = 0; // Test device for V4L compability /* Test using an open to see if this new device name really does exists. */ /* No matter what the name - it still must be opened! */ capture->deviceHandle = open(deviceName, O_RDWR); if (capture->deviceHandle == 0) { detect = -1; icvCloseCAM_V4L(capture); } if (detect == 0) { /* Query the newly opened device for its capabilities */ if (ioctl(capture->deviceHandle, VIDIOCGCAP, &capture->capability) < 0) { detect = 0; icvCloseCAM_V4L(capture); } else { detect = 1; } } return detect; } #ifdef HAVE_CAMV4L2 static int try_init_v4l2(CvCaptureCAM_V4L* capture, char *deviceName) { // if detect = -1 then unable to open device // if detect = 0 then detected nothing // if detect = 1 then V4L2 device int detect = 0; // Test device for V4L2 compability /* Open and test V4L2 device */ capture->deviceHandle = open (deviceName, O_RDWR /* required */ | O_NONBLOCK, 0); if (capture->deviceHandle == 0) { detect = -1; icvCloseCAM_V4L(capture); } if (detect == 0) { CLEAR (capture->cap); if (-1 == xioctl (capture->deviceHandle, VIDIOC_QUERYCAP, &capture->cap)) { detect = 0; icvCloseCAM_V4L(capture); } else { CLEAR (capture->capability); capture->capability.type = capture->cap.capabilities; /* Query channels number */ if (-1 != xioctl (capture->deviceHandle, VIDIOC_G_INPUT, &capture->capability.channels)) { detect = 1; } } } return detect; } static int autosetup_capture_mode_v4l2(CvCaptureCAM_V4L* capture) { if (try_palette_v4l2(capture, V4L2_PIX_FMT_BGR24) == 0) { PALETTE_BGR24 = 1; } else if (try_palette_v4l2(capture, V4L2_PIX_FMT_YVU420) == 0) { PALETTE_YVU420 = 1; } else if (try_palette_v4l2(capture, V4L2_PIX_FMT_YUV411P) == 0) { PALETTE_YUV411P = 1; } else #ifdef HAVE_JPEG #ifdef __USE_GNU /* support for MJPEG is only available with libjpeg and gcc, because it's use libjepg and fmemopen() */ if (try_palette_v4l2(capture, V4L2_PIX_FMT_MJPEG) == 0) { PALETTE_MJPEG = 1; } else #endif #endif if (try_palette_v4l2(capture, V4L2_PIX_FMT_YUYV) == 0) { PALETTE_YUYV = 1; } else if (try_palette_v4l2(capture, V4L2_PIX_FMT_UYVY) == 0) { PALETTE_UYVY = 1; } else if (try_palette_v4l2(capture, V4L2_PIX_FMT_SN9C10X) == 0) { CLEAR (capture->compr); if (-1 == xioctl (capture->deviceHandle, VIDIOC_G_JPEGCOMP, &capture->compr)) { perror ("VIDIOC_G_JPEGCOMP"); return -1; } capture->compr.quality = 0; if (-1 == xioctl (capture->deviceHandle, VIDIOC_S_JPEGCOMP, &capture->compr)) { perror ("VIDIOC_S_JPEGCOMP"); return -1; } PALETTE_SN9C10X = 1; } else if (try_palette_v4l2(capture, V4L2_PIX_FMT_SBGGR8) == 0) { PALETTE_SBGGR8 = 1; } else { fprintf(stderr, "HIGHGUI ERROR: V4L2: Pixel format of incoming image is unsupported by OpenCV\n"); icvCloseCAM_V4L(capture); return -1; } return 0; } #endif /* HAVE_CAMV4L2 */ static int autosetup_capture_mode_v4l(CvCaptureCAM_V4L* capture) { if(ioctl(capture->deviceHandle, VIDIOCGPICT, &capture->imageProperties) < 0) { fprintf( stderr, "HIGHGUI ERROR: V4L: Unable to determine size of incoming image\n"); icvCloseCAM_V4L(capture); return -1; } /* Yet MORE things that might have to be changes with your frame capture card */ /* This sets the scale to the center of a 2^16 number */ if (try_palette(capture->deviceHandle, &capture->imageProperties, VIDEO_PALETTE_RGB24, 24)) { //printf("negotiated palette RGB24\n"); } else if (try_palette(capture->deviceHandle, &capture->imageProperties, VIDEO_PALETTE_YUV420P, 16)) { //printf("negotiated palette YUV420P\n"); } else if (try_palette(capture->deviceHandle, &capture->imageProperties, VIDEO_PALETTE_YUV420, 16)) { //printf("negotiated palette YUV420\n"); } else if (try_palette(capture->deviceHandle, &capture->imageProperties, VIDEO_PALETTE_YUV411P, 16)) { //printf("negotiated palette YUV420P\n"); } else { fprintf(stderr, "HIGHGUI ERROR: V4L: Pixel format of incoming image is unsupported by OpenCV\n"); icvCloseCAM_V4L(capture); return -1; } return 0; } #ifdef HAVE_CAMV4L2 static void v4l2_scan_controls_enumerate_menu(CvCaptureCAM_V4L* capture) { // printf (" Menu items:\n"); CLEAR (capture->querymenu); capture->querymenu.id = capture->queryctrl.id; for (capture->querymenu.index = capture->queryctrl.minimum; (int)capture->querymenu.index <= capture->queryctrl.maximum; capture->querymenu.index++) { if (0 == xioctl (capture->deviceHandle, VIDIOC_QUERYMENU, &capture->querymenu)) { // printf (" %s\n", capture->querymenu.name); } else { perror ("VIDIOC_QUERYMENU"); } } } static void v4l2_scan_controls(CvCaptureCAM_V4L* capture) { __u32 ctrl_id; for (ctrl_id = V4L2_CID_BASE; ctrl_id < V4L2_CID_LASTP1; ctrl_id++) { /* set the id we will query now */ CLEAR (capture->queryctrl); capture->queryctrl.id = ctrl_id; if (0 == xioctl (capture->deviceHandle, VIDIOC_QUERYCTRL, &capture->queryctrl)) { if (capture->queryctrl.flags & V4L2_CTRL_FLAG_DISABLED) continue; if (capture->queryctrl.id == V4L2_CID_BRIGHTNESS) { capture->v4l2_brightness = 1; capture->v4l2_brightness_min = capture->queryctrl.minimum; capture->v4l2_brightness_max = capture->queryctrl.maximum; } if (capture->queryctrl.id == V4L2_CID_CONTRAST) { capture->v4l2_contrast = 1; capture->v4l2_contrast_min = capture->queryctrl.minimum; capture->v4l2_contrast_max = capture->queryctrl.maximum; } if (capture->queryctrl.id == V4L2_CID_SATURATION) { capture->v4l2_saturation = 1; capture->v4l2_saturation_min = capture->queryctrl.minimum; capture->v4l2_saturation_max = capture->queryctrl.maximum; } if (capture->queryctrl.id == V4L2_CID_HUE) { capture->v4l2_hue = 1; capture->v4l2_hue_min = capture->queryctrl.minimum; capture->v4l2_hue_max = capture->queryctrl.maximum; } if (capture->queryctrl.id == V4L2_CID_GAIN) { capture->v4l2_gain = 1; capture->v4l2_gain_min = capture->queryctrl.minimum; capture->v4l2_gain_max = capture->queryctrl.maximum; } if (capture->queryctrl.type == V4L2_CTRL_TYPE_MENU) v4l2_scan_controls_enumerate_menu(capture); } else { if (errno == EINVAL) continue; perror ("VIDIOC_QUERYCTRL"); } } for (ctrl_id = V4L2_CID_PRIVATE_BASE;;ctrl_id++) { /* set the id we will query now */ CLEAR (capture->queryctrl); capture->queryctrl.id = ctrl_id; if (0 == xioctl (capture->deviceHandle, VIDIOC_QUERYCTRL, &capture->queryctrl)) { if (capture->queryctrl.flags & V4L2_CTRL_FLAG_DISABLED) continue; if (capture->queryctrl.id == V4L2_CID_BRIGHTNESS) { capture->v4l2_brightness = 1; capture->v4l2_brightness_min = capture->queryctrl.minimum; capture->v4l2_brightness_max = capture->queryctrl.maximum; } if (capture->queryctrl.id == V4L2_CID_CONTRAST) { capture->v4l2_contrast = 1; capture->v4l2_contrast_min = capture->queryctrl.minimum; capture->v4l2_contrast_max = capture->queryctrl.maximum; } if (capture->queryctrl.id == V4L2_CID_SATURATION) { capture->v4l2_saturation = 1; capture->v4l2_saturation_min = capture->queryctrl.minimum; capture->v4l2_saturation_max = capture->queryctrl.maximum; } if (capture->queryctrl.id == V4L2_CID_HUE) { capture->v4l2_hue = 1; capture->v4l2_hue_min = capture->queryctrl.minimum; capture->v4l2_hue_max = capture->queryctrl.maximum; } if (capture->queryctrl.id == V4L2_CID_GAIN) { capture->v4l2_gain = 1; capture->v4l2_gain_min = capture->queryctrl.minimum; capture->v4l2_gain_max = capture->queryctrl.maximum; } if (capture->queryctrl.type == V4L2_CTRL_TYPE_MENU) v4l2_scan_controls_enumerate_menu(capture); } else { if (errno == EINVAL) break; perror ("VIDIOC_QUERYCTRL"); } } } static int _capture_V4L2 (CvCaptureCAM_V4L *capture, char *deviceName) { int detect_v4l2 = 0; detect_v4l2 = try_init_v4l2(capture, deviceName); if (detect_v4l2 != 1) { /* init of the v4l2 device is not OK */ return -1; } /* starting from here, we assume we are in V4L2 mode */ V4L2_SUPPORT = 1; /* Init V4L2 control variables */ capture->v4l2_brightness = 0; capture->v4l2_contrast = 0; capture->v4l2_saturation = 0; capture->v4l2_hue = 0; capture->v4l2_gain = 0; capture->v4l2_brightness_min = 0; capture->v4l2_contrast_min = 0; capture->v4l2_saturation_min = 0; capture->v4l2_hue_min = 0; capture->v4l2_gain_min = 0; capture->v4l2_brightness_max = 0; capture->v4l2_contrast_max = 0; capture->v4l2_saturation_max = 0; capture->v4l2_hue_max = 0; capture->v4l2_gain_max = 0; /* Scan V4L2 controls */ v4l2_scan_controls(capture); if ((capture->cap.capabilities & V4L2_CAP_VIDEO_CAPTURE) == 0) { /* Nope. */ fprintf( stderr, "HIGHGUI ERROR: V4L2: device %s is unable to capture video memory.\n",deviceName); icvCloseCAM_V4L(capture); return -1; } /* The following code sets the CHANNEL_NUMBER of the video input. Some video sources have sub "Channel Numbers". For a typical V4L TV capture card, this is usually 1. I myself am using a simple NTSC video input capture card that uses the value of 1. If you are not in North America or have a different video standard, you WILL have to change the following settings and recompile/reinstall. This set of settings is based on the most commonly encountered input video source types (like my bttv card) */ if(capture->inp.index > 0) { CLEAR (capture->inp); capture->inp.index = CHANNEL_NUMBER; /* Set only channel number to CHANNEL_NUMBER */ /* V4L2 have a status field from selected video mode */ if (-1 == xioctl (capture->deviceHandle, VIDIOC_ENUMINPUT, &capture->inp)) { fprintf (stderr, "HIGHGUI ERROR: V4L2: Aren't able to set channel number\n"); icvCloseCAM_V4L (capture); return -1; } } /* End if */ /* Find Window info */ CLEAR (capture->form); capture->form.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; if (-1 == xioctl (capture->deviceHandle, VIDIOC_G_FMT, &capture->form)) { fprintf( stderr, "HIGHGUI ERROR: V4L2: Could not obtain specifics of capture window.\n\n"); icvCloseCAM_V4L(capture); return -1; } if (V4L2_SUPPORT == 0) { } if (autosetup_capture_mode_v4l2(capture) == -1) return -1; icvSetVideoSize(capture, DEFAULT_V4L_WIDTH, DEFAULT_V4L_HEIGHT); unsigned int min; /* Buggy driver paranoia. */ min = capture->form.fmt.pix.width * 2; if (capture->form.fmt.pix.bytesperline < min) capture->form.fmt.pix.bytesperline = min; min = capture->form.fmt.pix.bytesperline * capture->form.fmt.pix.height; if (capture->form.fmt.pix.sizeimage < min) capture->form.fmt.pix.sizeimage = min; CLEAR (capture->req); unsigned int buffer_number = 4; try_again: capture->req.count = buffer_number; capture->req.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; capture->req.memory = V4L2_MEMORY_MMAP; if (-1 == xioctl (capture->deviceHandle, VIDIOC_REQBUFS, &capture->req)) { if (EINVAL == errno) { fprintf (stderr, "%s does not support memory mapping\n", deviceName); } else { perror ("VIDIOC_REQBUFS"); } /* free capture, and returns an error code */ icvCloseCAM_V4L (capture); return -1; } if (capture->req.count < buffer_number) { if (buffer_number == 1) { fprintf (stderr, "Insufficient buffer memory on %s\n", deviceName); /* free capture, and returns an error code */ icvCloseCAM_V4L (capture); return -1; } else { buffer_number--; goto try_again; } } for (n_buffers = 0; n_buffers < capture->req.count; ++n_buffers) { struct v4l2_buffer buf; CLEAR (buf); buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; buf.memory = V4L2_MEMORY_MMAP; buf.index = n_buffers; if (-1 == xioctl (capture->deviceHandle, VIDIOC_QUERYBUF, &buf)) { perror ("VIDIOC_QUERYBUF"); /* free capture, and returns an error code */ icvCloseCAM_V4L (capture); return -1; } capture->buffers[n_buffers].length = buf.length; capture->buffers[n_buffers].start = mmap (NULL /* start anywhere */, buf.length, PROT_READ | PROT_WRITE /* required */, MAP_SHARED /* recommended */, capture->deviceHandle, buf.m.offset); if (MAP_FAILED == capture->buffers[n_buffers].start) { perror ("mmap"); /* free capture, and returns an error code */ icvCloseCAM_V4L (capture); return -1; } } /* Set up Image data */ cvInitImageHeader( &capture->frame, cvSize( capture->captureWindow.width, capture->captureWindow.height ), IPL_DEPTH_8U, 3, IPL_ORIGIN_TL, 4 ); /* Allocate space for RGBA data */ capture->frame.imageData = (char *)cvAlloc(capture->frame.imageSize); return 1; }; /* End _capture_V4L2 */ #endif /* HAVE_CAMV4L2 */ static int _capture_V4L (CvCaptureCAM_V4L *capture, char *deviceName) { int detect_v4l = 0; detect_v4l = try_init_v4l(capture, deviceName); if ((detect_v4l == -1) ) { fprintf (stderr, "HIGHGUI ERROR: V4L" ": device %s: Unable to open for READ ONLY\n", deviceName); return -1; } if ((detect_v4l <= 0) ) { fprintf (stderr, "HIGHGUI ERROR: V4L" ": device %s: Unable to query number of channels\n", deviceName); return -1; } { if ((capture->capability.type & VID_TYPE_CAPTURE) == 0) { /* Nope. */ fprintf( stderr, "HIGHGUI ERROR: V4L: " "device %s is unable to capture video memory.\n",deviceName); icvCloseCAM_V4L(capture); return -1; } } /* The following code sets the CHANNEL_NUMBER of the video input. Some video sources have sub "Channel Numbers". For a typical V4L TV capture card, this is usually 1. I myself am using a simple NTSC video input capture card that uses the value of 1. If you are not in North America or have a different video standard, you WILL have to change the following settings and recompile/reinstall. This set of settings is based on the most commonly encountered input video source types (like my bttv card) */ { if(capture->capability.channels>0) { struct video_channel selectedChannel; selectedChannel.channel=CHANNEL_NUMBER; if (ioctl(capture->deviceHandle, VIDIOCGCHAN , &selectedChannel) != -1) { /* set the video mode to ( VIDEO_MODE_PAL, VIDEO_MODE_NTSC, VIDEO_MODE_SECAM) */ // selectedChannel.norm = VIDEO_MODE_NTSC; if (ioctl(capture->deviceHandle, VIDIOCSCHAN , &selectedChannel) == -1) { /* Could not set selected channel - Oh well */ //printf("\n%d, %s not NTSC capable.\n",selectedChannel.channel, selectedChannel.name); } /* End if */ } /* End if */ } /* End if */ } { if(ioctl(capture->deviceHandle, VIDIOCGWIN, &capture->captureWindow) == -1) { fprintf( stderr, "HIGHGUI ERROR: V4L: " "Could not obtain specifics of capture window.\n\n"); icvCloseCAM_V4L(capture); return -1; } } { if (autosetup_capture_mode_v4l(capture) == -1) return -1; } { ioctl(capture->deviceHandle, VIDIOCGMBUF, &capture->memoryBuffer); capture->memoryMap = (char *)mmap(0, capture->memoryBuffer.size, PROT_READ | PROT_WRITE, MAP_SHARED, capture->deviceHandle, 0); if (capture->memoryMap == MAP_FAILED) { fprintf( stderr, "HIGHGUI ERROR: V4L: Mapping Memmory from video source error: %s\n", strerror(errno)); icvCloseCAM_V4L(capture); } /* Set up video_mmap structure pointing to this memory mapped area so each image may be retrieved from an index value */ capture->mmaps = (struct video_mmap *) (malloc(capture->memoryBuffer.frames * sizeof(struct video_mmap))); if (!capture->mmaps) { fprintf( stderr, "HIGHGUI ERROR: V4L: Could not memory map video frames.\n"); icvCloseCAM_V4L(capture); return -1; } } /* Set up Image data */ cvInitImageHeader( &capture->frame, cvSize( capture->captureWindow.width, capture->captureWindow.height ), IPL_DEPTH_8U, 3, IPL_ORIGIN_TL, 4 ); /* Allocate space for RGBA data */ capture->frame.imageData = (char *)cvAlloc(capture->frame.imageSize); return 1; }; /* End _capture_V4L */ static CvCaptureCAM_V4L * icvCaptureFromCAM_V4L (int index) { static int autoindex=0; char deviceName[MAX_DEVICE_DRIVER_NAME]; if (!numCameras) icvInitCapture_V4L(); /* Havent called icvInitCapture yet - do it now! */ if (!numCameras) return NULL; /* Are there any /dev/video input sources? */ //search index in indexList if ( (index>-1) && ! ((1 << index) & indexList) ) { fprintf( stderr, "HIGHGUI ERROR: V4L: index %d is not correct!\n",index); return NULL; /* Did someone ask for not correct video source number? */ } /* Allocate memory for this humongus CvCaptureCAM_V4L structure that contains ALL the handles for V4L processing */ CvCaptureCAM_V4L * capture = (CvCaptureCAM_V4L*)cvAlloc(sizeof(CvCaptureCAM_V4L)); if (!capture) { fprintf( stderr, "HIGHGUI ERROR: V4L: Could not allocate memory for capture process.\n"); return NULL; } /* Select camera, or rather, V4L video source */ if (index<0) { // Asking for the first device available for (; autoindexFirstCapture = 1; #ifdef HAVE_CAMV4L2 if (_capture_V4L2 (capture, deviceName) == -1) { icvCloseCAM_V4L(capture); V4L2_SUPPORT = 0; #endif /* HAVE_CAMV4L2 */ if (_capture_V4L (capture, deviceName) == -1) { icvCloseCAM_V4L(capture); return NULL; } #ifdef HAVE_CAMV4L2 } else { V4L2_SUPPORT = 1; } #endif /* HAVE_CAMV4L2 */ return capture; }; /* End icvOpenCAM_V4L */ #ifdef HAVE_CAMV4L2 static int read_frame_v4l2(CvCaptureCAM_V4L* capture) { struct v4l2_buffer buf; CLEAR (buf); buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; buf.memory = V4L2_MEMORY_MMAP; if (-1 == xioctl (capture->deviceHandle, VIDIOC_DQBUF, &buf)) { switch (errno) { case EAGAIN: return 0; case EIO: /* Could ignore EIO, see spec. */ /* fall through */ default: /* display the error and stop processing */ perror ("VIDIOC_DQBUF"); return 1; } } assert(buf.index < capture->req.count); capture->bufferIndex = buf.index; if (-1 == xioctl (capture->deviceHandle, VIDIOC_QBUF, &buf)) perror ("VIDIOC_QBUF"); return 1; } static void mainloop_v4l2(CvCaptureCAM_V4L* capture) { unsigned int count; count = 1; while (count-- > 0) { for (;;) { fd_set fds; struct timeval tv; int r; FD_ZERO (&fds); FD_SET (capture->deviceHandle, &fds); /* Timeout. */ tv.tv_sec = 2; tv.tv_usec = 0; r = select (capture->deviceHandle+1, &fds, NULL, NULL, &tv); if (-1 == r) { if (EINTR == errno) continue; perror ("select"); } if (0 == r) { fprintf (stderr, "select timeout\n"); /* end the infinite loop */ break; } if (read_frame_v4l2 (capture)) break; } } } #endif /* HAVE_CAMV4L2 */ static int icvGrabFrameCAM_V4L(CvCaptureCAM_V4L* capture) { if (capture->FirstCapture) { /* Some general initialization must take place the first time through */ /* This is just a technicality, but all buffers must be filled up before any staggered SYNC is applied. SO, filler up. (see V4L HowTo) */ #ifdef HAVE_CAMV4L2 if (V4L2_SUPPORT == 1) { for (capture->bufferIndex = 0; capture->bufferIndex < ((int)capture->req.count); ++capture->bufferIndex) { struct v4l2_buffer buf; CLEAR (buf); buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; buf.memory = V4L2_MEMORY_MMAP; buf.index = (unsigned long)capture->bufferIndex; if (-1 == xioctl (capture->deviceHandle, VIDIOC_QBUF, &buf)) { perror ("VIDIOC_QBUF"); return 0; } } /* enable the streaming */ capture->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; if (-1 == xioctl (capture->deviceHandle, VIDIOC_STREAMON, &capture->type)) { /* error enabling the stream */ perror ("VIDIOC_STREAMON"); return 0; } } else #endif /* HAVE_CAMV4L2 */ { for (capture->bufferIndex = 0; capture->bufferIndex < (capture->memoryBuffer.frames-1); ++capture->bufferIndex) { capture->mmaps[capture->bufferIndex].frame = capture->bufferIndex; capture->mmaps[capture->bufferIndex].width = capture->captureWindow.width; capture->mmaps[capture->bufferIndex].height = capture->captureWindow.height; capture->mmaps[capture->bufferIndex].format = capture->imageProperties.palette; if (ioctl(capture->deviceHandle, VIDIOCMCAPTURE, &capture->mmaps[capture->bufferIndex]) == -1) { fprintf( stderr, "HIGHGUI ERROR: V4L: Initial Capture Error: Unable to load initial memory buffers.\n"); return 0; } } } /* preparation is ok */ capture->FirstCapture = 0; } #ifdef HAVE_CAMV4L2 if (V4L2_SUPPORT == 1) { mainloop_v4l2(capture); } else #endif /* HAVE_CAMV4L2 */ { capture->mmaps[capture->bufferIndex].frame = capture->bufferIndex; capture->mmaps[capture->bufferIndex].width = capture->captureWindow.width; capture->mmaps[capture->bufferIndex].height = capture->captureWindow.height; capture->mmaps[capture->bufferIndex].format = capture->imageProperties.palette; if (ioctl (capture->deviceHandle, VIDIOCMCAPTURE, &capture->mmaps[capture->bufferIndex]) == -1) { /* capture is on the way, so just exit */ return 1; } ++capture->bufferIndex; if (capture->bufferIndex == capture->memoryBuffer.frames) { capture->bufferIndex = 0; } } return(1); } /* * Turn a YUV4:2:0 block into an RGB block * * Video4Linux seems to use the blue, green, red channel * order convention-- rgb[0] is blue, rgb[1] is green, rgb[2] is red. * * Color space conversion coefficients taken from the excellent * http://www.inforamp.net/~poynton/ColorFAQ.html * In his terminology, this is a CCIR 601.1 YCbCr -> RGB. * Y values are given for all 4 pixels, but the U (Pb) * and V (Pr) are assumed constant over the 2x2 block. * * To avoid floating point arithmetic, the color conversion * coefficients are scaled into 16.16 fixed-point integers. * They were determined as follows: * * double brightness = 1.0; (0->black; 1->full scale) * double saturation = 1.0; (0->greyscale; 1->full color) * double fixScale = brightness * 256 * 256; * int rvScale = (int)(1.402 * saturation * fixScale); * int guScale = (int)(-0.344136 * saturation * fixScale); * int gvScale = (int)(-0.714136 * saturation * fixScale); * int buScale = (int)(1.772 * saturation * fixScale); * int yScale = (int)(fixScale); */ /* LIMIT: convert a 16.16 fixed-point value to a byte, with clipping. */ #define LIMIT(x) ((x)>0xffffff?0xff: ((x)<=0xffff?0:((x)>>16))) static inline void move_420_block(int yTL, int yTR, int yBL, int yBR, int u, int v, int rowPixels, unsigned char * rgb) { const int rvScale = 91881; const int guScale = -22553; const int gvScale = -46801; const int buScale = 116129; const int yScale = 65536; int r, g, b; g = guScale * u + gvScale * v; // if (force_rgb) { // r = buScale * u; // b = rvScale * v; // } else { r = rvScale * v; b = buScale * u; // } yTL *= yScale; yTR *= yScale; yBL *= yScale; yBR *= yScale; /* Write out top two pixels */ rgb[0] = LIMIT(b+yTL); rgb[1] = LIMIT(g+yTL); rgb[2] = LIMIT(r+yTL); rgb[3] = LIMIT(b+yTR); rgb[4] = LIMIT(g+yTR); rgb[5] = LIMIT(r+yTR); /* Skip down to next line to write out bottom two pixels */ rgb += 3 * rowPixels; rgb[0] = LIMIT(b+yBL); rgb[1] = LIMIT(g+yBL); rgb[2] = LIMIT(r+yBL); rgb[3] = LIMIT(b+yBR); rgb[4] = LIMIT(g+yBR); rgb[5] = LIMIT(r+yBR); } static inline void move_411_block(int yTL, int yTR, int yBL, int yBR, int u, int v, int rowPixels, unsigned char * rgb) { const int rvScale = 91881; const int guScale = -22553; const int gvScale = -46801; const int buScale = 116129; const int yScale = 65536; int r, g, b; g = guScale * u + gvScale * v; // if (force_rgb) { // r = buScale * u; // b = rvScale * v; // } else { r = rvScale * v; b = buScale * u; // } yTL *= yScale; yTR *= yScale; yBL *= yScale; yBR *= yScale; /* Write out top two first pixels */ rgb[0] = LIMIT(b+yTL); rgb[1] = LIMIT(g+yTL); rgb[2] = LIMIT(r+yTL); rgb[3] = LIMIT(b+yTR); rgb[4] = LIMIT(g+yTR); rgb[5] = LIMIT(r+yTR); /* Write out top two last pixels */ rgb += 6; rgb[0] = LIMIT(b+yBL); rgb[1] = LIMIT(g+yBL); rgb[2] = LIMIT(r+yBL); rgb[3] = LIMIT(b+yBR); rgb[4] = LIMIT(g+yBR); rgb[5] = LIMIT(r+yBR); } // Consider a YUV420P image of 8x2 pixels. // // A plane of Y values A B C D E F G H // I J K L M N O P // // A plane of U values 1 2 3 4 // A plane of V values 1 2 3 4 .... // // The U1/V1 samples correspond to the ABIJ pixels. // U2/V2 samples correspond to the CDKL pixels. // /* Converts from planar YUV420P to RGB24. */ static void yuv420p_to_rgb24(int width, int height, unsigned char *pIn0, unsigned char *pOut0) { const int numpix = width * height; const int bytes = 24 >> 3; int i, j, y00, y01, y10, y11, u, v; unsigned char *pY = pIn0; unsigned char *pU = pY + numpix; unsigned char *pV = pU + numpix / 4; unsigned char *pOut = pOut0; for (j = 0; j <= height - 2; j += 2) { for (i = 0; i <= width - 2; i += 2) { y00 = *pY; y01 = *(pY + 1); y10 = *(pY + width); y11 = *(pY + width + 1); u = (*pU++) - 128; v = (*pV++) - 128; move_420_block(y00, y01, y10, y11, u, v, width, pOut); pY += 2; pOut += 2 * bytes; } pY += width; pOut += width * bytes; } } // Consider a YUV420 image of 6x2 pixels. // // A B C D U1 U2 // I J K L V1 V2 // // The U1/V1 samples correspond to the ABIJ pixels. // U2/V2 samples correspond to the CDKL pixels. // /* Converts from interlaced YUV420 to RGB24. */ /* [FD] untested... */ static void yuv420_to_rgb24(int width, int height, unsigned char *pIn0, unsigned char *pOut0) { const int bytes = 24 >> 3; int i, j, y00, y01, y10, y11, u, v; unsigned char *pY = pIn0; unsigned char *pU = pY + 4; unsigned char *pV = pU + width; unsigned char *pOut = pOut0; for (j = 0; j <= height - 2; j += 2) { for (i = 0; i <= width - 4; i += 4) { y00 = *pY; y01 = *(pY + 1); y10 = *(pY + width); y11 = *(pY + width + 1); u = (*pU++) - 128; v = (*pV++) - 128; move_420_block(y00, y01, y10, y11, u, v, width, pOut); pY += 2; pOut += 2 * bytes; y00 = *pY; y01 = *(pY + 1); y10 = *(pY + width); y11 = *(pY + width + 1); u = (*pU++) - 128; v = (*pV++) - 128; move_420_block(y00, y01, y10, y11, u, v, width, pOut); pY += 4; // skip UV pOut += 2 * bytes; } pY += width; pOut += width * bytes; } } // Consider a YUV411P image of 8x2 pixels. // // A plane of Y values as before. // // A plane of U values 1 2 // 3 4 // // A plane of V values 1 2 // 3 4 // // The U1/V1 samples correspond to the ABCD pixels. // U2/V2 samples correspond to the EFGH pixels. // /* Converts from planar YUV411P to RGB24. */ /* [FD] untested... */ static void yuv411p_to_rgb24(int width, int height, unsigned char *pIn0, unsigned char *pOut0) { const int numpix = width * height; const int bytes = 24 >> 3; int i, j, y00, y01, y10, y11, u, v; unsigned char *pY = pIn0; unsigned char *pU = pY + numpix; unsigned char *pV = pU + numpix / 4; unsigned char *pOut = pOut0; for (j = 0; j <= height; j++) { for (i = 0; i <= width - 4; i += 4) { y00 = *pY; y01 = *(pY + 1); y10 = *(pY + 2); y11 = *(pY + 3); u = (*pU++) - 128; v = (*pV++) - 128; move_411_block(y00, y01, y10, y11, u, v, width, pOut); pY += 4; pOut += 4 * bytes; } } } /* convert from 4:2:2 YUYV interlaced to RGB24 */ /* based on ccvt_yuyv_bgr32() from camstream */ #define SAT(c) \ if (c & (~255)) { if (c < 0) c = 0; else c = 255; } static void yuyv_to_rgb24 (int width, int height, unsigned char *src, unsigned char *dst) { unsigned char *s; unsigned char *d; int l, c; int r, g, b, cr, cg, cb, y1, y2; l = height; s = src; d = dst; while (l--) { c = width >> 1; while (c--) { y1 = *s++; cb = ((*s - 128) * 454) >> 8; cg = (*s++ - 128) * 88; y2 = *s++; cr = ((*s - 128) * 359) >> 8; cg = (cg + (*s++ - 128) * 183) >> 8; r = y1 + cr; b = y1 + cb; g = y1 - cg; SAT(r); SAT(g); SAT(b); *d++ = b; *d++ = g; *d++ = r; r = y2 + cr; b = y2 + cb; g = y2 - cg; SAT(r); SAT(g); SAT(b); *d++ = b; *d++ = g; *d++ = r; } } } static void uyvy_to_rgb24 (int width, int height, unsigned char *src, unsigned char *dst) { unsigned char *s; unsigned char *d; int l, c; int r, g, b, cr, cg, cb, y1, y2; l = height; s = src; d = dst; while (l--) { c = width >> 1; while (c--) { cb = ((*s - 128) * 454) >> 8; cg = (*s++ - 128) * 88; y1 = *s++; cr = ((*s - 128) * 359) >> 8; cg = (cg + (*s++ - 128) * 183) >> 8; y2 = *s++; r = y1 + cr; b = y1 + cb; g = y1 - cg; SAT(r); SAT(g); SAT(b); *d++ = b; *d++ = g; *d++ = r; r = y2 + cr; b = y2 + cb; g = y2 - cg; SAT(r); SAT(g); SAT(b); *d++ = b; *d++ = g; *d++ = r; } } } #ifdef HAVE_JPEG #ifdef __USE_GNU /* support for MJPEG is only available with libjpeg and gcc, because it's use libjepg and fmemopen() */ /* include headers to be able to use libjpeg and GrFmtJpegReader */ #include "grfmts.h" extern "C" { #include "jpeglib.h" } /* define a new class for using fmemopen() instead of fopen() */ class MyMJpegReader : public GrFmtJpegReader { public: MyMJpegReader (unsigned char *src, size_t src_size); bool ReadHeader (); protected: unsigned char *my_src; size_t my_src_size; }; /////////////////////// Error processing ///////////////////// typedef struct GrFmtJpegErrorMgr { struct jpeg_error_mgr pub; /* "parent" structure */ jmp_buf setjmp_buffer; /* jump label */ } GrFmtJpegErrorMgr; METHODDEF(void) error_exit( j_common_ptr cinfo ) { GrFmtJpegErrorMgr* err_mgr = (GrFmtJpegErrorMgr*)(cinfo->err); /* Return control to the setjmp point */ longjmp( err_mgr->setjmp_buffer, 1 ); } /////////////////////// MyMJpegReader /////////////////// /* constructor just call the parent constructor, but without real filename */ MyMJpegReader::MyMJpegReader (unsigned char *src, size_t src_size) : GrFmtJpegReader ("/dev/null") { /* memorize the given src memory area, with it's size */ my_src = src; my_src_size = src_size; } /* MyMJpegReader::ReadHeader is almost like GrFmtJpegReader::ReadHeader, just use fmemopen() instead of fopen() */ bool MyMJpegReader::ReadHeader () { bool result = false; Close(); jpeg_decompress_struct* cinfo = new jpeg_decompress_struct; GrFmtJpegErrorMgr* jerr = new GrFmtJpegErrorMgr; cinfo->err = jpeg_std_error(&jerr->pub); jerr->pub.error_exit = error_exit; m_cinfo = cinfo; m_jerr = jerr; if( setjmp( jerr->setjmp_buffer ) == 0 ) { jpeg_create_decompress( cinfo ); m_f = fmemopen( my_src, my_src_size, "rb" ); if( m_f ) { jpeg_stdio_src( cinfo, m_f ); jpeg_read_header( cinfo, TRUE ); m_width = cinfo->image_width; m_height = cinfo->image_height; m_iscolor = cinfo->num_components > 1; result = true; } } if( !result ) Close(); return result; } /* convert from mjpeg to rgb24 */ static void mjpeg_to_rgb24 (int width, int height, unsigned char *src, int length, unsigned char *dst) { /* use a MyMJpegReader reader for doing the conversion */ MyMJpegReader* reader = 0; reader = new MyMJpegReader (src, length); reader->ReadHeader (); reader->ReadData (dst, width * 3, 1 ); delete reader; } #endif #endif /* * BAYER2RGB24 ROUTINE TAKEN FROM: * * Sonix SN9C10x based webcam basic I/F routines * Takafumi Mizuno * */ void bayer2rgb24(long int WIDTH, long int HEIGHT, unsigned char *src, unsigned char *dst) { long int i; unsigned char *rawpt, *scanpt; long int size; rawpt = src; scanpt = dst; size = WIDTH*HEIGHT; for ( i = 0; i < size; i++ ) { if ( (i/WIDTH) % 2 == 0 ) { if ( (i % 2) == 0 ) { /* B */ if ( (i > WIDTH) && ((i % WIDTH) > 0) ) { *scanpt++ = (*(rawpt-WIDTH-1)+*(rawpt-WIDTH+1)+ *(rawpt+WIDTH-1)+*(rawpt+WIDTH+1))/4; /* R */ *scanpt++ = (*(rawpt-1)+*(rawpt+1)+ *(rawpt+WIDTH)+*(rawpt-WIDTH))/4; /* G */ *scanpt++ = *rawpt; /* B */ } else { /* first line or left column */ *scanpt++ = *(rawpt+WIDTH+1); /* R */ *scanpt++ = (*(rawpt+1)+*(rawpt+WIDTH))/2; /* G */ *scanpt++ = *rawpt; /* B */ } } else { /* (B)G */ if ( (i > WIDTH) && ((i % WIDTH) < (WIDTH-1)) ) { *scanpt++ = (*(rawpt+WIDTH)+*(rawpt-WIDTH))/2; /* R */ *scanpt++ = *rawpt; /* G */ *scanpt++ = (*(rawpt-1)+*(rawpt+1))/2; /* B */ } else { /* first line or right column */ *scanpt++ = *(rawpt+WIDTH); /* R */ *scanpt++ = *rawpt; /* G */ *scanpt++ = *(rawpt-1); /* B */ } } } else { if ( (i % 2) == 0 ) { /* G(R) */ if ( (i < (WIDTH*(HEIGHT-1))) && ((i % WIDTH) > 0) ) { *scanpt++ = (*(rawpt-1)+*(rawpt+1))/2; /* R */ *scanpt++ = *rawpt; /* G */ *scanpt++ = (*(rawpt+WIDTH)+*(rawpt-WIDTH))/2; /* B */ } else { /* bottom line or left column */ *scanpt++ = *(rawpt+1); /* R */ *scanpt++ = *rawpt; /* G */ *scanpt++ = *(rawpt-WIDTH); /* B */ } } else { /* R */ if ( i < (WIDTH*(HEIGHT-1)) && ((i % WIDTH) < (WIDTH-1)) ) { *scanpt++ = *rawpt; /* R */ *scanpt++ = (*(rawpt-1)+*(rawpt+1)+ *(rawpt-WIDTH)+*(rawpt+WIDTH))/4; /* G */ *scanpt++ = (*(rawpt-WIDTH-1)+*(rawpt-WIDTH+1)+ *(rawpt+WIDTH-1)+*(rawpt+WIDTH+1))/4; /* B */ } else { /* bottom line or right column */ *scanpt++ = *rawpt; /* R */ *scanpt++ = (*(rawpt-1)+*(rawpt-WIDTH))/2; /* G */ *scanpt++ = *(rawpt-WIDTH-1); /* B */ } } } rawpt++; } } #define CLAMP(x) ((x)<0?0:((x)>255)?255:(x)) typedef struct { int is_abs; int len; int val; } code_table_t; /* local storage */ static code_table_t table[256]; static int init_done = 0; /* sonix_decompress_init ===================== pre-calculates a locally stored table for efficient huffman-decoding. Each entry at index x in the table represents the codeword present at the MSB of byte x. */ void sonix_decompress_init(void) { int i; int is_abs, val, len; for (i = 0; i < 256; i++) { is_abs = 0; val = 0; len = 0; if ((i & 0x80) == 0) { /* code 0 */ val = 0; len = 1; } else if ((i & 0xE0) == 0x80) { /* code 100 */ val = +4; len = 3; } else if ((i & 0xE0) == 0xA0) { /* code 101 */ val = -4; len = 3; } else if ((i & 0xF0) == 0xD0) { /* code 1101 */ val = +11; len = 4; } else if ((i & 0xF0) == 0xF0) { /* code 1111 */ val = -11; len = 4; } else if ((i & 0xF8) == 0xC8) { /* code 11001 */ val = +20; len = 5; } else if ((i & 0xFC) == 0xC0) { /* code 110000 */ val = -20; len = 6; } else if ((i & 0xFC) == 0xC4) { /* code 110001xx: unknown */ val = 0; len = 8; } else if ((i & 0xF0) == 0xE0) { /* code 1110xxxx */ is_abs = 1; val = (i & 0x0F) << 4; len = 8; } table[i].is_abs = is_abs; table[i].val = val; table[i].len = len; } init_done = 1; } /* sonix_decompress ================ decompresses an image encoded by a SN9C101 camera controller chip. IN width height inp pointer to compressed frame (with header already stripped) OUT outp pointer to decompressed frame Returns 0 if the operation was successful. Returns <0 if operation failed. */ int sonix_decompress(int width, int height, unsigned char *inp, unsigned char *outp) { int row, col; int val; int bitpos; unsigned char code; unsigned char *addr; if (!init_done) { /* do sonix_decompress_init first! */ return -1; } bitpos = 0; for (row = 0; row < height; row++) { col = 0; /* first two pixels in first two rows are stored as raw 8-bit */ if (row < 2) { addr = inp + (bitpos >> 3); code = (addr[0] << (bitpos & 7)) | (addr[1] >> (8 - (bitpos & 7))); bitpos += 8; *outp++ = code; addr = inp + (bitpos >> 3); code = (addr[0] << (bitpos & 7)) | (addr[1] >> (8 - (bitpos & 7))); bitpos += 8; *outp++ = code; col += 2; } while (col < width) { /* get bitcode from bitstream */ addr = inp + (bitpos >> 3); code = (addr[0] << (bitpos & 7)) | (addr[1] >> (8 - (bitpos & 7))); /* update bit position */ bitpos += table[code].len; /* calculate pixel value */ val = table[code].val; if (!table[code].is_abs) { /* value is relative to top and left pixel */ if (col < 2) { /* left column: relative to top pixel */ val += outp[-2*width]; } else if (row < 2) { /* top row: relative to left pixel */ val += outp[-2]; } else { /* main area: average of left pixel and top pixel */ val += (outp[-2] + outp[-2*width]) / 2; } } /* store pixel */ *outp++ = CLAMP(val); col++; } } return 0; } static IplImage* icvRetrieveFrameCAM_V4L( CvCaptureCAM_V4L* capture) { #ifdef HAVE_CAMV4L2 if (V4L2_SUPPORT == 0) #endif /* HAVE_CAMV4L2 */ { /* [FD] this really belongs here */ if (ioctl(capture->deviceHandle, VIDIOCSYNC, &capture->mmaps[capture->bufferIndex].frame) == -1) { fprintf( stderr, "HIGHGUI ERROR: V4L: Could not SYNC to video stream. %s\n", strerror(errno)); } } /* Now get what has already been captured as a IplImage return */ /* First, reallocate imageData if the frame size changed */ #ifdef HAVE_CAMV4L2 if (V4L2_SUPPORT == 1) { if(((unsigned long)capture->frame.width != capture->form.fmt.pix.width) || ((unsigned long)capture->frame.height != capture->form.fmt.pix.height)) { cvFree(&capture->frame.imageData); cvInitImageHeader( &capture->frame, cvSize( capture->form.fmt.pix.width, capture->form.fmt.pix.height ), IPL_DEPTH_8U, 3, IPL_ORIGIN_TL, 4 ); capture->frame.imageData = (char *)cvAlloc(capture->frame.imageSize); } } else #endif /* HAVE_CAMV4L2 */ { if((capture->frame.width != capture->mmaps[capture->bufferIndex].width) || (capture->frame.height != capture->mmaps[capture->bufferIndex].height)) { cvFree(&capture->frame.imageData); cvInitImageHeader( &capture->frame, cvSize( capture->captureWindow.width, capture->captureWindow.height ), IPL_DEPTH_8U, 3, IPL_ORIGIN_TL, 4 ); capture->frame.imageData = (char *)cvAlloc(capture->frame.imageSize); } } #ifdef HAVE_CAMV4L2 if (V4L2_SUPPORT == 1) { if (PALETTE_BGR24 == 1) memcpy((char *)capture->frame.imageData, (char *)capture->buffers[capture->bufferIndex].start, capture->frame.imageSize); if (PALETTE_YVU420 == 1) yuv420p_to_rgb24(capture->form.fmt.pix.width, capture->form.fmt.pix.height, (unsigned char*)(capture->buffers[capture->bufferIndex].start), (unsigned char*)capture->frame.imageData); if (PALETTE_YUV411P == 1) yuv411p_to_rgb24(capture->form.fmt.pix.width, capture->form.fmt.pix.height, (unsigned char*)(capture->buffers[capture->bufferIndex].start), (unsigned char*)capture->frame.imageData); #ifdef HAVE_JPEG #ifdef __USE_GNU /* support for MJPEG is only available with libjpeg and gcc, because it's use libjepg and fmemopen() */ if (PALETTE_MJPEG == 1) mjpeg_to_rgb24(capture->form.fmt.pix.width, capture->form.fmt.pix.height, (unsigned char*)(capture->buffers[capture->bufferIndex] .start), capture->buffers[capture->bufferIndex].length, (unsigned char*)capture->frame.imageData); #endif #endif if (PALETTE_YUYV == 1) yuyv_to_rgb24(capture->form.fmt.pix.width, capture->form.fmt.pix.height, (unsigned char*)(capture->buffers[capture->bufferIndex].start), (unsigned char*)capture->frame.imageData); if (PALETTE_UYVY == 1) uyvy_to_rgb24(capture->form.fmt.pix.width, capture->form.fmt.pix.height, (unsigned char*)(capture->buffers[capture->bufferIndex].start), (unsigned char*)capture->frame.imageData); if (PALETTE_SBGGR8 == 1) { bayer2rgb24(capture->form.fmt.pix.width, capture->form.fmt.pix.height, (unsigned char*)capture->buffers[capture->bufferIndex].start, (unsigned char*)capture->frame.imageData); } if (PALETTE_SN9C10X == 1) { sonix_decompress_init(); sonix_decompress(capture->form.fmt.pix.width, capture->form.fmt.pix.height, (unsigned char*)capture->buffers[capture->bufferIndex].start, (unsigned char*)capture->buffers[(capture->bufferIndex+1) % capture->req.count].start); bayer2rgb24(capture->form.fmt.pix.width, capture->form.fmt.pix.height, (unsigned char*)capture->buffers[(capture->bufferIndex+1) % capture->req.count].start, (unsigned char*)capture->frame.imageData); } } else #endif /* HAVE_CAMV4L2 */ { switch(capture->imageProperties.palette) { case VIDEO_PALETTE_RGB24: memcpy((char *)capture->frame.imageData, (char *)(capture->memoryMap + capture->memoryBuffer.offsets[capture->bufferIndex]), capture->frame.imageSize); break; case VIDEO_PALETTE_YUV420P: yuv420p_to_rgb24(capture->captureWindow.width, capture->captureWindow.height, (unsigned char*)(capture->memoryMap + capture->memoryBuffer.offsets[capture->bufferIndex]), (unsigned char*)capture->frame.imageData); break; case VIDEO_PALETTE_YUV420: yuv420_to_rgb24(capture->captureWindow.width, capture->captureWindow.height, (unsigned char*)(capture->memoryMap + capture->memoryBuffer.offsets[capture->bufferIndex]), (unsigned char*)capture->frame.imageData); break; case VIDEO_PALETTE_YUV411P: yuv411p_to_rgb24(capture->captureWindow.width, capture->captureWindow.height, (unsigned char*)(capture->memoryMap + capture->memoryBuffer.offsets[capture->bufferIndex]), (unsigned char*)capture->frame.imageData); break; default: fprintf( stderr, "HIGHGUI ERROR: V4L: Cannot convert from palette %d to RGB\n", capture->imageProperties.palette); return 0; } } return(&capture->frame); } static double icvGetPropertyCAM_V4L (CvCaptureCAM_V4L* capture, int property_id ) { #ifdef HAVE_CAMV4L2 if (V4L2_SUPPORT == 1) { /* default value for min and max */ int v4l2_min = 0; int v4l2_max = 255; CLEAR (capture->form); capture->form.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; if (-1 == xioctl (capture->deviceHandle, VIDIOC_G_FMT, &capture->form)) { /* display an error message, and return an error code */ perror ("VIDIOC_G_FMT"); return -1; } switch (property_id) { case CV_CAP_PROP_FRAME_WIDTH: return capture->form.fmt.pix.width; case CV_CAP_PROP_FRAME_HEIGHT: return capture->form.fmt.pix.height; } /* initialize the control structure */ switch (property_id) { case CV_CAP_PROP_BRIGHTNESS: capture->control.id = V4L2_CID_BRIGHTNESS; break; case CV_CAP_PROP_CONTRAST: capture->control.id = V4L2_CID_CONTRAST; break; case CV_CAP_PROP_SATURATION: capture->control.id = V4L2_CID_SATURATION; break; case CV_CAP_PROP_HUE: capture->control.id = V4L2_CID_HUE; break; case CV_CAP_PROP_GAIN: capture->control.id = V4L2_CID_GAIN; break; default: fprintf(stderr, "HIGHGUI ERROR: V4L2: getting property #%d is not supported\n", property_id); return -1; } if (-1 == xioctl (capture->deviceHandle, VIDIOC_G_CTRL, &capture->control)) { fprintf( stderr, "HIGHGUI ERROR: V4L2: "); switch (property_id) { case CV_CAP_PROP_BRIGHTNESS: fprintf (stderr, "Brightness"); break; case CV_CAP_PROP_CONTRAST: fprintf (stderr, "Contrast"); break; case CV_CAP_PROP_SATURATION: fprintf (stderr, "Saturation"); break; case CV_CAP_PROP_HUE: fprintf (stderr, "Hue"); break; case CV_CAP_PROP_GAIN: fprintf (stderr, "Gain"); break; } fprintf (stderr, " is not supported by your device\n"); return -1; } /* get the min/max values */ switch (property_id) { case CV_CAP_PROP_BRIGHTNESS: v4l2_min = capture->v4l2_brightness_min; v4l2_max = capture->v4l2_brightness_max; break; case CV_CAP_PROP_CONTRAST: v4l2_min = capture->v4l2_contrast_min; v4l2_max = capture->v4l2_contrast_max; break; case CV_CAP_PROP_SATURATION: v4l2_min = capture->v4l2_saturation_min; v4l2_max = capture->v4l2_saturation_max; break; case CV_CAP_PROP_HUE: v4l2_min = capture->v4l2_hue_min; v4l2_max = capture->v4l2_hue_max; break; case CV_CAP_PROP_GAIN: v4l2_min = capture->v4l2_gain_min; v4l2_max = capture->v4l2_gain_max; break; } /* all was OK, so convert to 0.0 - 1.0 range, and return the value */ return ((float)capture->control.value - v4l2_min + 1) / (v4l2_max - v4l2_min); } else #endif /* HAVE_CAMV4L2 */ { int retval = -1; if (ioctl (capture->deviceHandle, VIDIOCGWIN, &capture->captureWindow) < 0) { fprintf (stderr, "HIGHGUI ERROR: V4L: " "Unable to determine size of incoming image\n"); icvCloseCAM_V4L(capture); return -1; } switch (property_id) { case CV_CAP_PROP_FRAME_WIDTH: retval = capture->captureWindow.width; break; case CV_CAP_PROP_FRAME_HEIGHT: retval = capture->captureWindow.height; break; case CV_CAP_PROP_BRIGHTNESS: retval = capture->imageProperties.brightness; break; case CV_CAP_PROP_CONTRAST: retval = capture->imageProperties.contrast; break; case CV_CAP_PROP_SATURATION: retval = capture->imageProperties.colour; break; case CV_CAP_PROP_HUE: retval = capture->imageProperties.hue; break; case CV_CAP_PROP_GAIN: fprintf(stderr, "HIGHGUI ERROR: V4L: Gain control in V4L is not supported\n"); return -1; break; default: fprintf(stderr, "HIGHGUI ERROR: V4L: getting property #%d is not supported\n", property_id); } if (retval == -1) { /* there was a problem */ return -1; } /* all was OK, so convert to 0.0 - 1.0 range, and return the value */ return float (retval) / 0xFFFF; } }; static int icvSetVideoSize( CvCaptureCAM_V4L* capture, int w, int h) { #ifdef HAVE_CAMV4L2 if (V4L2_SUPPORT == 1) { CLEAR (capture->crop); capture->crop.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; capture->crop.c.left = 0; capture->crop.c.top = 0; capture->crop.c.height = h*24; capture->crop.c.width = w*24; /* set the crop area, but don't exit if the device don't support croping */ xioctl (capture->deviceHandle, VIDIOC_S_CROP, &capture->crop); CLEAR (capture->form); capture->form.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; /* read the current setting, mainly to retreive the pixelformat information */ xioctl (capture->deviceHandle, VIDIOC_G_FMT, &capture->form); /* set the values we want to change */ capture->form.fmt.pix.width = w; capture->form.fmt.pix.height = h; capture->form.fmt.win.chromakey = 0; capture->form.fmt.win.field = V4L2_FIELD_ANY; capture->form.fmt.win.clips = 0; capture->form.fmt.win.clipcount = 0; capture->form.fmt.pix.field = V4L2_FIELD_ANY; /* ask the device to change the size * don't test if the set of the size is ok, because some device * don't allow changing the size, and we will get the real size * later */ xioctl (capture->deviceHandle, VIDIOC_S_FMT, &capture->form); /* try to set framerate to 30 fps */ struct v4l2_streamparm setfps; memset (&setfps, 0, sizeof(struct v4l2_streamparm)); setfps.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; setfps.parm.capture.timeperframe.numerator = 1; setfps.parm.capture.timeperframe.denominator = 30; xioctl (capture->deviceHandle, VIDIOC_S_PARM, &setfps); /* we need to re-initialize some things, like buffers, because the size has * changed */ capture->FirstCapture = 1; /* Get window info again, to get the real value */ if (-1 == xioctl (capture->deviceHandle, VIDIOC_G_FMT, &capture->form)) { fprintf(stderr, "HIGHGUI ERROR: V4L/V4L2: Could not obtain specifics of capture window.\n\n"); icvCloseCAM_V4L(capture); return 0; } return 0; } else #endif /* HAVE_CAMV4L2 */ { if (capture==0) return 0; if (w>capture->capability.maxwidth) { w=capture->capability.maxwidth; } if (h>capture->capability.maxheight) { h=capture->capability.maxheight; } capture->captureWindow.width=w; capture->captureWindow.height=h; if (ioctl(capture->deviceHandle, VIDIOCSWIN, &capture->captureWindow) < 0) { icvCloseCAM_V4L(capture); return 0; } if (ioctl(capture->deviceHandle, VIDIOCGWIN, &capture->captureWindow) < 0) { icvCloseCAM_V4L(capture); return 0; } capture->FirstCapture = 1; } return 0; } static int icvSetControl (CvCaptureCAM_V4L* capture, int property_id, double value) { /* limitation of the input value */ if (value < 0.0) { value = 0.0; } else if (value > 1.0) { value = 1.0; } #ifdef HAVE_CAMV4L2 if (V4L2_SUPPORT == 1) { /* default value for min and max */ int v4l2_min = 0; int v4l2_max = 255; /* initialisations */ CLEAR (capture->control); /* set which control we want to set */ switch (property_id) { case CV_CAP_PROP_BRIGHTNESS: capture->control.id = V4L2_CID_BRIGHTNESS; break; case CV_CAP_PROP_CONTRAST: capture->control.id = V4L2_CID_CONTRAST; break; case CV_CAP_PROP_SATURATION: capture->control.id = V4L2_CID_SATURATION; break; case CV_CAP_PROP_HUE: capture->control.id = V4L2_CID_HUE; break; case CV_CAP_PROP_GAIN: capture->control.id = V4L2_CID_GAIN; break; default: fprintf(stderr, "HIGHGUI ERROR: V4L2: setting property #%d is not supported\n", property_id); return -1; } /* get the min and max values */ if (-1 == xioctl (capture->deviceHandle, VIDIOC_G_CTRL, &capture->control)) { // perror ("VIDIOC_G_CTRL for getting min/max values"); return -1; } /* get the min/max values */ switch (property_id) { case CV_CAP_PROP_BRIGHTNESS: v4l2_min = capture->v4l2_brightness_min; v4l2_max = capture->v4l2_brightness_max; break; case CV_CAP_PROP_CONTRAST: v4l2_min = capture->v4l2_contrast_min; v4l2_max = capture->v4l2_contrast_max; break; case CV_CAP_PROP_SATURATION: v4l2_min = capture->v4l2_saturation_min; v4l2_max = capture->v4l2_saturation_max; break; case CV_CAP_PROP_HUE: v4l2_min = capture->v4l2_hue_min; v4l2_max = capture->v4l2_hue_max; break; case CV_CAP_PROP_GAIN: v4l2_min = capture->v4l2_gain_min; v4l2_max = capture->v4l2_gain_max; break; } /* initialisations */ CLEAR (capture->control); /* set which control we want to set */ switch (property_id) { case CV_CAP_PROP_BRIGHTNESS: capture->control.id = V4L2_CID_BRIGHTNESS; break; case CV_CAP_PROP_CONTRAST: capture->control.id = V4L2_CID_CONTRAST; break; case CV_CAP_PROP_SATURATION: capture->control.id = V4L2_CID_SATURATION; break; case CV_CAP_PROP_HUE: capture->control.id = V4L2_CID_HUE; break; case CV_CAP_PROP_GAIN: capture->control.id = V4L2_CID_GAIN; break; default: fprintf(stderr, "HIGHGUI ERROR: V4L2: setting property #%d is not supported\n", property_id); return -1; } /* set the value we want to set to the scaled the value */ capture->control.value = (int)(value * (v4l2_max - v4l2_min) + v4l2_min); /* The driver may clamp the value or return ERANGE, ignored here */ if (-1 == xioctl (capture->deviceHandle, VIDIOC_S_CTRL, &capture->control) && errno != ERANGE) { perror ("VIDIOC_S_CTRL"); return -1; } } else #endif /* HAVE_CAMV4L2 */ { int v4l_value; /* scale the value to the wanted integer one */ v4l_value = (int)(0xFFFF * value); switch (property_id) { case CV_CAP_PROP_BRIGHTNESS: capture->imageProperties.brightness = v4l_value; break; case CV_CAP_PROP_CONTRAST: capture->imageProperties.contrast = v4l_value; break; case CV_CAP_PROP_SATURATION: capture->imageProperties.colour = v4l_value; break; case CV_CAP_PROP_HUE: capture->imageProperties.hue = v4l_value; break; case CV_CAP_PROP_GAIN: fprintf(stderr, "HIGHGUI ERROR: V4L: Gain control in V4L is not supported\n"); return -1; default: fprintf(stderr, "HIGHGUI ERROR: V4L: property #%d is not supported\n", property_id); return -1; } if (ioctl(capture->deviceHandle, VIDIOCSPICT, &capture->imageProperties) < 0) { fprintf(stderr, "HIGHGUI ERROR: V4L: Unable to set video informations\n"); icvCloseCAM_V4L(capture); return -1; } } /* all was OK */ return 0; } static int icvSetPropertyCAM_V4L( CvCaptureCAM_V4L* capture, int property_id, double value ){ static int width = 0, height = 0; int retval; /* initialization */ retval = 0; /* two subsequent calls setting WIDTH and HEIGHT will change the video size */ /* the first one will return an error, though. */ switch (property_id) { case CV_CAP_PROP_FRAME_WIDTH: width = cvRound(value); if(width !=0 && height != 0) { retval = icvSetVideoSize( capture, width, height); width = height = 0; } break; case CV_CAP_PROP_FRAME_HEIGHT: height = cvRound(value); if(width !=0 && height != 0) { retval = icvSetVideoSize( capture, width, height); width = height = 0; } break; case CV_CAP_PROP_BRIGHTNESS: case CV_CAP_PROP_CONTRAST: case CV_CAP_PROP_SATURATION: case CV_CAP_PROP_HUE: case CV_CAP_PROP_GAIN: retval = icvSetControl(capture, property_id, value); break; default: fprintf(stderr, "HIGHGUI ERROR: V4L: setting property #%d is not supported\n", property_id); } /* return the the status */ return retval; } static void icvCloseCAM_V4L( CvCaptureCAM_V4L* capture ){ /* Deallocate space - Hopefully, no leaks */ if (capture) { #ifdef HAVE_CAMV4L2 if (V4L2_SUPPORT == 0) #endif /* HAVE_CAMV4L2 */ { if (capture->mmaps) free(capture->mmaps); if (capture->memoryMap) munmap(capture->memoryMap, capture->memoryBuffer.size); } #ifdef HAVE_CAMV4L2 else { for (unsigned int n_buffers = 0; n_buffers < capture->req.count; ++n_buffers) { if (-1 == munmap (capture->buffers[n_buffers].start, capture->buffers[n_buffers].length)) { perror ("munmap"); } } } #endif /* HAVE_CAMV4L2 */ if (capture->deviceHandle > 0) close(capture->deviceHandle); if (capture->frame.imageData) cvFree(&capture->frame.imageData); //cvFree((void **)capture); } }; class CvCaptureCAM_V4L_CPP : CvCapture { public: CvCaptureCAM_V4L_CPP() { captureV4L = 0; } virtual ~CvCaptureCAM_V4L_CPP() { close(); } virtual bool open( int index ); virtual void close(); virtual double getProperty(int); virtual bool setProperty(int, double); virtual bool grabFrame(); virtual IplImage* retrieveFrame(); protected: CvCaptureCAM_V4L* captureV4L; }; bool CvCaptureCAM_V4L_CPP::open( int index ) { close(); captureV4L = icvCaptureFromCAM_V4L(index); return captureV4L != 0; } void CvCaptureCAM_V4L_CPP::close() { if( captureV4L ) { icvCloseCAM_V4L( captureV4L ); cvFree( &captureV4L ); } } bool CvCaptureCAM_V4L_CPP::grabFrame() { return captureV4L ? icvGrabFrameCAM_V4L( captureV4L ) != 0 : false; } IplImage* CvCaptureCAM_V4L_CPP::retrieveFrame() { return captureV4L ? icvRetrieveFrameCAM_V4L( captureV4L ) : 0; } double CvCaptureCAM_V4L_CPP::getProperty( int propId ) { return captureV4L ? icvGetPropertyCAM_V4L( captureV4L, propId ) : 0.0; } bool CvCaptureCAM_V4L_CPP::setProperty( int propId, double value ) { return captureV4L ? icvSetPropertyCAM_V4L( captureV4L, propId, value ) != 0 : false; } CvCapture* cvCreateCameraCapture_V4L( int index ) { CvCaptureCAM_V4L_CPP* capture = new CvCaptureCAM_V4L_CPP; if( capture->open( index )) return (CvCapture*)capture; delete capture; return 0; } #endif