USB: ftdi_sio: Adding Ewert Energy System's CANdapter PID

The following patch adds in the USB PID for Ewert Energy System's CANdapter
device (CANBUS to USB-Serial which uses the FTDI 245R chipset) to the ftdi_sio
device driver.

The patch was tested successfully on Linux kernel 2.6.27 under Ubuntu.

Relevant output from /proc/bus/usb/devices (With patch installed):

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0403 ProdID=9f80 Rev= 6.00
S:  Manufacturer=Ewert Energy Systems
S:  Product=CANdapter
S:  SerialNumber=A6RGB3Z3
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 90mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=ftdi_sio
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

Signed-off-by: Andrew Ewert <andrew@ewertenergy.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index abbc2d8..fb6f293 100644 (file)
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -143,6 +143,7 @@ static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = {
 static struct usb_device_id id_table_combined [] = {
        { USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
+       { USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) },

diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 70703b7..373ee09 100644 (file)
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -40,6 +40,9 @@
 /* AlphaMicro Components AMC-232USB01 device */
 #define FTDI_AMC232_PID 0xFF00 /* Product Id */
 
+/* www.candapter.com Ewert Energy Systems CANdapter device */
+#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */
+
 /* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */
 /* the VID is the standard ftdi vid (FTDI_VID) */
 #define FTDI_SCS_DEVICE_0_PID 0xD010    /* SCS PTC-IIusb */