--- /dev/null
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software
+Foundation, Inc.
+
+ This file is free documentation; the Free Software Foundation gives
+unlimited permission to copy, distribute and modify it.
+
+Basic Installation
+==================
+
+ These are generic installation instructions.
+
+ The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation. It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions. Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+ It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring. (Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.)
+
+ If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release. If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
+
+ The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'. You only need
+`configure.ac' if you want to change it or regenerate `configure' using
+a newer version of `autoconf'.
+
+The simplest way to compile this package is:
+
+ 1. `cd' to the directory containing the package's source code and type
+ `./configure' to configure the package for your system. If you're
+ using `csh' on an old version of System V, you might need to type
+ `sh ./configure' instead to prevent `csh' from trying to execute
+ `configure' itself.
+
+ Running `configure' takes awhile. While running, it prints some
+ messages telling which features it is checking for.
+
+ 2. Type `make' to compile the package.
+
+ 3. Optionally, type `make check' to run any self-tests that come with
+ the package.
+
+ 4. Type `make install' to install the programs and any data files and
+ documentation.
+
+ 5. You can remove the program binaries and object files from the
+ source code directory by typing `make clean'. To also remove the
+ files that `configure' created (so you can compile the package for
+ a different kind of computer), type `make distclean'. There is
+ also a `make maintainer-clean' target, but that is intended mainly
+ for the package's developers. If you use it, you may have to get
+ all sorts of other programs in order to regenerate files that came
+ with the distribution.
+
+Compilers and Options
+=====================
+
+ Some systems require unusual options for compilation or linking that
+the `configure' script does not know about. Run `./configure --help'
+for details on some of the pertinent environment variables.
+
+ You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment. Here
+is an example:
+
+ ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
+
+ *Note Defining Variables::, for more details.
+
+Compiling For Multiple Architectures
+====================================
+
+ You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory. To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'. `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script. `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+ If you have to use a `make' that does not support the `VPATH'
+variable, you have to compile the package for one architecture at a
+time in the source code directory. After you have installed the
+package for one architecture, use `make distclean' before reconfiguring
+for another architecture.
+
+Installation Names
+==================
+
+ By default, `make install' will install the package's files in
+`/usr/local/bin', `/usr/local/man', etc. You can specify an
+installation prefix other than `/usr/local' by giving `configure' the
+option `--prefix=PATH'.
+
+ You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files. If you
+give `configure' the option `--exec-prefix=PATH', the package will use
+PATH as the prefix for installing programs and libraries.
+Documentation and other data files will still use the regular prefix.
+
+ In addition, if you use an unusual directory layout you can give
+options like `--bindir=PATH' to specify different values for particular
+kinds of files. Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+ If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+ Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System). The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+ For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Specifying the System Type
+==========================
+
+ There may be some features `configure' cannot figure out
+automatically, but needs to determine by the type of machine the package
+will run on. Usually, assuming the package is built to be run on the
+_same_ architectures, `configure' can figure that out, but if it prints
+a message saying it cannot guess the machine type, give it the
+`--build=TYPE' option. TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
+ CPU-COMPANY-SYSTEM
+
+where SYSTEM can have one of these forms:
+
+ OS KERNEL-OS
+
+ See the file `config.sub' for the possible values of each field. If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the machine type.
+
+ If you are _building_ compiler tools for cross-compiling, you should
+use the `--target=TYPE' option to select the type of system they will
+produce code for.
+
+ If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
+
+Sharing Defaults
+================
+
+ If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists. Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Defining Variables
+==================
+
+ Variables not defined in a site shell script can be set in the
+environment passed to `configure'. However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost. In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'. For example:
+
+ ./configure CC=/usr/local2/bin/gcc
+
+will cause the specified gcc to be used as the C compiler (unless it is
+overridden in the site shell script).
+
+`configure' Invocation
+======================
+
+ `configure' recognizes the following options to control how it
+operates.
+
+`--help'
+`-h'
+ Print a summary of the options to `configure', and exit.
+
+`--version'
+`-V'
+ Print the version of Autoconf used to generate the `configure'
+ script, and exit.
+
+`--cache-file=FILE'
+ Enable the cache: use and save the results of the tests in FILE,
+ traditionally `config.cache'. FILE defaults to `/dev/null' to
+ disable caching.
+
+`--config-cache'
+`-C'
+ Alias for `--cache-file=config.cache'.
+
+`--quiet'
+`--silent'
+`-q'
+ Do not print messages saying which checks are being made. To
+ suppress all normal output, redirect it to `/dev/null' (any error
+ messages will still be shown).
+
+`--srcdir=DIR'
+ Look for the package's source code in directory DIR. Usually
+ `configure' can determine that directory automatically.
+
+`configure' also accepts some other, not widely useful, options. Run
+`configure --help' for more details.
+
#!/bin/sh
-set -x
-aclocal-1.7 || aclocal
-libtoolize --automake
-gtkdocize --copy
-autoconf
-autoheader
-automake-1.7 --add-missing --foreign || automake --add-missing --foreign
+ACLOCAL_FLAGS="$ACLOCAL_FLAGS -I m4"
+DIE=0
+
+srcdir=`dirname $0`
+test -z "$srcdir" && srcdir=.
+
+(autoconf --version) < /dev/null > /dev/null 2>&1 || {
+ echo
+ echo "**Error**: You must have \`autoconf' installed."
+ echo "Download the appropriate package for your distribution,"
+ echo "or get the source tarball at ftp://ftp.gnu.org/pub/gnu/"
+ DIE=1
+}
+
+if [ -z "$LIBTOOL" ]; then
+ LIBTOOL=`which glibtool 2>/dev/null`
+ if [ ! -x "$LIBTOOL" ]; then
+ LIBTOOL=`which libtool`
+ fi
+fi
+
+(grep "^AM_PROG_LIBTOOL" $srcdir/configure.ac >/dev/null) && {
+ ($LIBTOOL --version) < /dev/null > /dev/null 2>&1 || {
+ echo
+ echo "**Error**: You must have \`libtool' installed."
+ echo "Get ftp://ftp.gnu.org/pub/gnu/libtool-1.2d.tar.gz"
+ echo "(or a newer version if it is available)"
+ DIE=1
+ }
+}
+
+(automake --version) < /dev/null > /dev/null 2>&1 || {
+ echo
+ echo "**Error**: You must have \`automake' installed."
+ echo "Get ftp://ftp.gnu.org/pub/gnu/automake-1.3.tar.gz"
+ echo "(or a newer version if it is available)"
+ DIE=1
+ NO_AUTOMAKE=yes
+}
+
+
+# if no automake, don't bother testing for aclocal
+test -n "$NO_AUTOMAKE" || (aclocal --version) < /dev/null > /dev/null 2>&1 || {
+ echo
+ echo "**Error**: Missing \`aclocal'. The version of \`automake'"
+ echo "installed doesn't appear recent enough."
+ echo "Get ftp://ftp.gnu.org/pub/gnu/automake-1.3.tar.gz"
+ echo "(or a newer version if it is available)"
+ DIE=1
+}
+
+if test "$DIE" -eq 1; then
+ exit 1
+fi
+
+if test -z "$*"; then
+ echo "**Warning**: I am going to run \`configure' with no arguments."
+ echo "If you wish to pass any to it, please specify them on the"
+ echo \`$0\'" command line."
+ echo
+fi
+
+case $CC in
+xlc )
+ am_opt=--include-deps;;
+esac
+
+
+if grep "^AM_PROG_LIBTOOL" configure.ac >/dev/null; then
+ if test -z "$NO_LIBTOOLIZE" ; then
+ echo "Running libtoolize..."
+ libtoolize --force --copy
+ fi
+fi
+
+echo "Running aclocal $ACLOCAL_FLAGS ..."
+aclocal $ACLOCAL_FLAGS || {
+ echo
+ echo "**Error**: aclocal failed. This may mean that you have not"
+ echo "installed all of the packages you need, or you may need to"
+ echo "set ACLOCAL_FLAGS to include \"-I \$prefix/share/aclocal\""
+ echo "for the prefix where you installed the packages whose"
+ echo "macros were not found"
+ exit 1
+}
+
+if grep "^AM_CONFIG_HEADER" configure.ac >/dev/null; then
+ echo "Running autoheader..."
+ autoheader || { echo "**Error**: autoheader failed."; exit 1; }
+fi
+
+echo "Running automake --gnu $am_opt ..."
+automake --add-missing --gnu $am_opt ||
+ { echo "**Error**: automake failed."; exit 1; }
+echo "Running autoconf ..."
+autoconf || { echo "**Error**: autoconf failed."; exit 1; }
+
+
+conf_flags="--enable-maintainer-mode"
if test x$NOCONFIGURE = x; then
- ./configure --enable-maintainer-mode "$@"
+ echo Running $srcdir/configure $conf_flags "$@" ...
+ $srcdir/configure $conf_flags "$@" \
+ && echo Now type \`make\' to compile $PKG_NAME || exit 1
else
echo Skipping configure process.
fi
projects / hildon / commitdiff