hcm's fixes
[kernel-power] / usbhost / drivers / usb2 / storage / alauda.c
1 /*
2  * Driver for Alauda-based card readers
3  *
4  * Current development and maintenance by:
5  *   (c) 2005 Daniel Drake <dsd@gentoo.org>
6  *
7  * The 'Alauda' is a chip manufacturered by RATOC for OEM use.
8  *
9  * Alauda implements a vendor-specific command set to access two media reader
10  * ports (XD, SmartMedia). This driver converts SCSI commands to the commands
11  * which are accepted by these devices.
12  *
13  * The driver was developed through reverse-engineering, with the help of the
14  * sddr09 driver which has many similarities, and with some help from the
15  * (very old) vendor-supplied GPL sma03 driver.
16  *
17  * For protocol info, see http://alauda.sourceforge.net
18  *
19  * This program is free software; you can redistribute it and/or modify it
20  * under the terms of the GNU General Public License as published by the
21  * Free Software Foundation; either version 2, or (at your option) any
22  * later version.
23  *
24  * This program is distributed in the hope that it will be useful, but
25  * WITHOUT ANY WARRANTY; without even the implied warranty of
26  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
27  * General Public License for more details.
28  *
29  * You should have received a copy of the GNU General Public License along
30  * with this program; if not, write to the Free Software Foundation, Inc.,
31  * 675 Mass Ave, Cambridge, MA 02139, USA.
32  */
33
34 #include <scsi/scsi.h>
35 #include <scsi/scsi_cmnd.h>
36 #include <scsi/scsi_device.h>
37
38 #include "usb.h"
39 #include "transport.h"
40 #include "protocol.h"
41 #include "debug.h"
42 #include "alauda.h"
43
44 #define short_pack(lsb,msb) ( ((u16)(lsb)) | ( ((u16)(msb))<<8 ) )
45 #define LSB_of(s) ((s)&0xFF)
46 #define MSB_of(s) ((s)>>8)
47
48 #define MEDIA_PORT(us) us->srb->device->lun
49 #define MEDIA_INFO(us) ((struct alauda_info *)us->extra)->port[MEDIA_PORT(us)]
50
51 #define PBA_LO(pba) ((pba & 0xF) << 5)
52 #define PBA_HI(pba) (pba >> 3)
53 #define PBA_ZONE(pba) (pba >> 11)
54
55 /*
56  * Media handling
57  */
58
59 struct alauda_card_info {
60         unsigned char id;               /* id byte */
61         unsigned char chipshift;        /* 1<<cs bytes total capacity */
62         unsigned char pageshift;        /* 1<<ps bytes in a page */
63         unsigned char blockshift;       /* 1<<bs pages per block */
64         unsigned char zoneshift;        /* 1<<zs blocks per zone */
65 };
66
67 static struct alauda_card_info alauda_card_ids[] = {
68         /* NAND flash */
69         { 0x6e, 20, 8, 4, 8},   /* 1 MB */
70         { 0xe8, 20, 8, 4, 8},   /* 1 MB */
71         { 0xec, 20, 8, 4, 8},   /* 1 MB */
72         { 0x64, 21, 8, 4, 9},   /* 2 MB */
73         { 0xea, 21, 8, 4, 9},   /* 2 MB */
74         { 0x6b, 22, 9, 4, 9},   /* 4 MB */
75         { 0xe3, 22, 9, 4, 9},   /* 4 MB */
76         { 0xe5, 22, 9, 4, 9},   /* 4 MB */
77         { 0xe6, 23, 9, 4, 10},  /* 8 MB */
78         { 0x73, 24, 9, 5, 10},  /* 16 MB */
79         { 0x75, 25, 9, 5, 10},  /* 32 MB */
80         { 0x76, 26, 9, 5, 10},  /* 64 MB */
81         { 0x79, 27, 9, 5, 10},  /* 128 MB */
82         { 0x71, 28, 9, 5, 10},  /* 256 MB */
83
84         /* MASK ROM */
85         { 0x5d, 21, 9, 4, 8},   /* 2 MB */
86         { 0xd5, 22, 9, 4, 9},   /* 4 MB */
87         { 0xd6, 23, 9, 4, 10},  /* 8 MB */
88         { 0x57, 24, 9, 4, 11},  /* 16 MB */
89         { 0x58, 25, 9, 4, 12},  /* 32 MB */
90         { 0,}
91 };
92
93 static struct alauda_card_info *alauda_card_find_id(unsigned char id) {
94         int i;
95
96         for (i = 0; alauda_card_ids[i].id != 0; i++)
97                 if (alauda_card_ids[i].id == id)
98                         return &(alauda_card_ids[i]);
99         return NULL;
100 }
101
102 /*
103  * ECC computation.
104  */
105
106 static unsigned char parity[256];
107 static unsigned char ecc2[256];
108
109 static void nand_init_ecc(void) {
110         int i, j, a;
111
112         parity[0] = 0;
113         for (i = 1; i < 256; i++)
114                 parity[i] = (parity[i&(i-1)] ^ 1);
115
116         for (i = 0; i < 256; i++) {
117                 a = 0;
118                 for (j = 0; j < 8; j++) {
119                         if (i & (1<<j)) {
120                                 if ((j & 1) == 0)
121                                         a ^= 0x04;
122                                 if ((j & 2) == 0)
123                                         a ^= 0x10;
124                                 if ((j & 4) == 0)
125                                         a ^= 0x40;
126                         }
127                 }
128                 ecc2[i] = ~(a ^ (a<<1) ^ (parity[i] ? 0xa8 : 0));
129         }
130 }
131
132 /* compute 3-byte ecc on 256 bytes */
133 static void nand_compute_ecc(unsigned char *data, unsigned char *ecc) {
134         int i, j, a;
135         unsigned char par, bit, bits[8];
136
137         par = 0;
138         for (j = 0; j < 8; j++)
139                 bits[j] = 0;
140
141         /* collect 16 checksum bits */
142         for (i = 0; i < 256; i++) {
143                 par ^= data[i];
144                 bit = parity[data[i]];
145                 for (j = 0; j < 8; j++)
146                         if ((i & (1<<j)) == 0)
147                                 bits[j] ^= bit;
148         }
149
150         /* put 4+4+4 = 12 bits in the ecc */
151         a = (bits[3] << 6) + (bits[2] << 4) + (bits[1] << 2) + bits[0];
152         ecc[0] = ~(a ^ (a<<1) ^ (parity[par] ? 0xaa : 0));
153
154         a = (bits[7] << 6) + (bits[6] << 4) + (bits[5] << 2) + bits[4];
155         ecc[1] = ~(a ^ (a<<1) ^ (parity[par] ? 0xaa : 0));
156
157         ecc[2] = ecc2[par];
158 }
159
160 static int nand_compare_ecc(unsigned char *data, unsigned char *ecc) {
161         return (data[0] == ecc[0] && data[1] == ecc[1] && data[2] == ecc[2]);
162 }
163
164 static void nand_store_ecc(unsigned char *data, unsigned char *ecc) {
165         memcpy(data, ecc, 3);
166 }
167
168 /*
169  * Alauda driver
170  */
171
172 /*
173  * Forget our PBA <---> LBA mappings for a particular port
174  */
175 static void alauda_free_maps (struct alauda_media_info *media_info)
176 {
177         unsigned int shift = media_info->zoneshift
178                 + media_info->blockshift + media_info->pageshift;
179         unsigned int num_zones = media_info->capacity >> shift;
180         unsigned int i;
181
182         if (media_info->lba_to_pba != NULL)
183                 for (i = 0; i < num_zones; i++) {
184                         kfree(media_info->lba_to_pba[i]);
185                         media_info->lba_to_pba[i] = NULL;
186                 }
187
188         if (media_info->pba_to_lba != NULL)
189                 for (i = 0; i < num_zones; i++) {
190                         kfree(media_info->pba_to_lba[i]);
191                         media_info->pba_to_lba[i] = NULL;
192                 }
193 }
194
195 /*
196  * Returns 2 bytes of status data
197  * The first byte describes media status, and second byte describes door status
198  */
199 static int alauda_get_media_status(struct us_data *us, unsigned char *data)
200 {
201         int rc;
202         unsigned char command;
203
204         if (MEDIA_PORT(us) == ALAUDA_PORT_XD)
205                 command = ALAUDA_GET_XD_MEDIA_STATUS;
206         else
207                 command = ALAUDA_GET_SM_MEDIA_STATUS;
208
209         rc = usb_stor_ctrl_transfer(us, us->recv_ctrl_pipe,
210                 command, 0xc0, 0, 1, data, 2);
211
212         US_DEBUGP("alauda_get_media_status: Media status %02X %02X\n",
213                 data[0], data[1]);
214
215         return rc;
216 }
217
218 /*
219  * Clears the "media was changed" bit so that we know when it changes again
220  * in the future.
221  */
222 static int alauda_ack_media(struct us_data *us)
223 {
224         unsigned char command;
225
226         if (MEDIA_PORT(us) == ALAUDA_PORT_XD)
227                 command = ALAUDA_ACK_XD_MEDIA_CHANGE;
228         else
229                 command = ALAUDA_ACK_SM_MEDIA_CHANGE;
230
231         return usb_stor_ctrl_transfer(us, us->send_ctrl_pipe,
232                 command, 0x40, 0, 1, NULL, 0);
233 }
234
235 /*
236  * Retrieves a 4-byte media signature, which indicates manufacturer, capacity,
237  * and some other details.
238  */
239 static int alauda_get_media_signature(struct us_data *us, unsigned char *data)
240 {
241         unsigned char command;
242
243         if (MEDIA_PORT(us) == ALAUDA_PORT_XD)
244                 command = ALAUDA_GET_XD_MEDIA_SIG;
245         else
246                 command = ALAUDA_GET_SM_MEDIA_SIG;
247
248         return usb_stor_ctrl_transfer(us, us->recv_ctrl_pipe,
249                 command, 0xc0, 0, 0, data, 4);
250 }
251
252 /*
253  * Resets the media status (but not the whole device?)
254  */
255 static int alauda_reset_media(struct us_data *us)
256 {
257         unsigned char *command = us->iobuf;
258
259         memset(command, 0, 9);
260         command[0] = ALAUDA_BULK_CMD;
261         command[1] = ALAUDA_BULK_RESET_MEDIA;
262         command[8] = MEDIA_PORT(us);
263
264         return usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
265                 command, 9, NULL);
266 }
267
268 /*
269  * Examines the media and deduces capacity, etc.
270  */
271 static int alauda_init_media(struct us_data *us)
272 {
273         unsigned char *data = us->iobuf;
274         int ready = 0;
275         struct alauda_card_info *media_info;
276         unsigned int num_zones;
277
278         while (ready == 0) {
279                 msleep(20);
280
281                 if (alauda_get_media_status(us, data) != USB_STOR_XFER_GOOD)
282                         return USB_STOR_TRANSPORT_ERROR;
283
284                 if (data[0] & 0x10)
285                         ready = 1;
286         }
287
288         US_DEBUGP("alauda_init_media: We are ready for action!\n");
289
290         if (alauda_ack_media(us) != USB_STOR_XFER_GOOD)
291                 return USB_STOR_TRANSPORT_ERROR;
292
293         msleep(10);
294
295         if (alauda_get_media_status(us, data) != USB_STOR_XFER_GOOD)
296                 return USB_STOR_TRANSPORT_ERROR;
297
298         if (data[0] != 0x14) {
299                 US_DEBUGP("alauda_init_media: Media not ready after ack\n");
300                 return USB_STOR_TRANSPORT_ERROR;
301         }
302
303         if (alauda_get_media_signature(us, data) != USB_STOR_XFER_GOOD)
304                 return USB_STOR_TRANSPORT_ERROR;
305
306         US_DEBUGP("alauda_init_media: Media signature: %02X %02X %02X %02X\n",
307                 data[0], data[1], data[2], data[3]);
308         media_info = alauda_card_find_id(data[1]);
309         if (media_info == NULL) {
310                 printk("alauda_init_media: Unrecognised media signature: "
311                         "%02X %02X %02X %02X\n",
312                         data[0], data[1], data[2], data[3]);
313                 return USB_STOR_TRANSPORT_ERROR;
314         }
315
316         MEDIA_INFO(us).capacity = 1 << media_info->chipshift;
317         US_DEBUGP("Found media with capacity: %ldMB\n",
318                 MEDIA_INFO(us).capacity >> 20);
319
320         MEDIA_INFO(us).pageshift = media_info->pageshift;
321         MEDIA_INFO(us).blockshift = media_info->blockshift;
322         MEDIA_INFO(us).zoneshift = media_info->zoneshift;
323
324         MEDIA_INFO(us).pagesize = 1 << media_info->pageshift;
325         MEDIA_INFO(us).blocksize = 1 << media_info->blockshift;
326         MEDIA_INFO(us).zonesize = 1 << media_info->zoneshift;
327
328         MEDIA_INFO(us).uzonesize = ((1 << media_info->zoneshift) / 128) * 125;
329         MEDIA_INFO(us).blockmask = MEDIA_INFO(us).blocksize - 1;
330
331         num_zones = MEDIA_INFO(us).capacity >> (MEDIA_INFO(us).zoneshift
332                 + MEDIA_INFO(us).blockshift + MEDIA_INFO(us).pageshift);
333         MEDIA_INFO(us).pba_to_lba = kcalloc(num_zones, sizeof(u16*), GFP_NOIO);
334         MEDIA_INFO(us).lba_to_pba = kcalloc(num_zones, sizeof(u16*), GFP_NOIO);
335
336         if (alauda_reset_media(us) != USB_STOR_XFER_GOOD)
337                 return USB_STOR_TRANSPORT_ERROR;
338
339         return USB_STOR_TRANSPORT_GOOD;
340 }
341
342 /*
343  * Examines the media status and does the right thing when the media has gone,
344  * appeared, or changed.
345  */
346 static int alauda_check_media(struct us_data *us)
347 {
348         struct alauda_info *info = (struct alauda_info *) us->extra;
349         unsigned char status[2];
350         int rc;
351
352         rc = alauda_get_media_status(us, status);
353
354         /* Check for no media or door open */
355         if ((status[0] & 0x80) || ((status[0] & 0x1F) == 0x10)
356                 || ((status[1] & 0x01) == 0)) {
357                 US_DEBUGP("alauda_check_media: No media, or door open\n");
358                 alauda_free_maps(&MEDIA_INFO(us));
359                 info->sense_key = 0x02;
360                 info->sense_asc = 0x3A;
361                 info->sense_ascq = 0x00;
362                 return USB_STOR_TRANSPORT_FAILED;
363         }
364
365         /* Check for media change */
366         if (status[0] & 0x08) {
367                 US_DEBUGP("alauda_check_media: Media change detected\n");
368                 alauda_free_maps(&MEDIA_INFO(us));
369                 alauda_init_media(us);
370
371                 info->sense_key = UNIT_ATTENTION;
372                 info->sense_asc = 0x28;
373                 info->sense_ascq = 0x00;
374                 return USB_STOR_TRANSPORT_FAILED;
375         }
376
377         return USB_STOR_TRANSPORT_GOOD;
378 }
379
380 /*
381  * Checks the status from the 2nd status register
382  * Returns 3 bytes of status data, only the first is known
383  */
384 static int alauda_check_status2(struct us_data *us)
385 {
386         int rc;
387         unsigned char command[] = {
388                 ALAUDA_BULK_CMD, ALAUDA_BULK_GET_STATUS2,
389                 0, 0, 0, 0, 3, 0, MEDIA_PORT(us)
390         };
391         unsigned char data[3];
392
393         rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
394                 command, 9, NULL);
395         if (rc != USB_STOR_XFER_GOOD)
396                 return rc;
397
398         rc = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
399                 data, 3, NULL);
400         if (rc != USB_STOR_XFER_GOOD)
401                 return rc;
402
403         US_DEBUGP("alauda_check_status2: %02X %02X %02X\n", data[0], data[1], data[2]);
404         if (data[0] & ALAUDA_STATUS_ERROR)
405                 return USB_STOR_XFER_ERROR;
406
407         return USB_STOR_XFER_GOOD;
408 }
409
410 /*
411  * Gets the redundancy data for the first page of a PBA
412  * Returns 16 bytes.
413  */
414 static int alauda_get_redu_data(struct us_data *us, u16 pba, unsigned char *data)
415 {
416         int rc;
417         unsigned char command[] = {
418                 ALAUDA_BULK_CMD, ALAUDA_BULK_GET_REDU_DATA,
419                 PBA_HI(pba), PBA_ZONE(pba), 0, PBA_LO(pba), 0, 0, MEDIA_PORT(us)
420         };
421
422         rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
423                 command, 9, NULL);
424         if (rc != USB_STOR_XFER_GOOD)
425                 return rc;
426
427         return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
428                 data, 16, NULL);
429 }
430
431 /*
432  * Finds the first unused PBA in a zone
433  * Returns the absolute PBA of an unused PBA, or 0 if none found.
434  */
435 static u16 alauda_find_unused_pba(struct alauda_media_info *info,
436         unsigned int zone)
437 {
438         u16 *pba_to_lba = info->pba_to_lba[zone];
439         unsigned int i;
440
441         for (i = 0; i < info->zonesize; i++)
442                 if (pba_to_lba[i] == UNDEF)
443                         return (zone << info->zoneshift) + i;
444
445         return 0;
446 }
447
448 /*
449  * Reads the redundancy data for all PBA's in a zone
450  * Produces lba <--> pba mappings
451  */
452 static int alauda_read_map(struct us_data *us, unsigned int zone)
453 {
454         unsigned char *data = us->iobuf;
455         int result;
456         int i, j;
457         unsigned int zonesize = MEDIA_INFO(us).zonesize;
458         unsigned int uzonesize = MEDIA_INFO(us).uzonesize;
459         unsigned int lba_offset, lba_real, blocknum;
460         unsigned int zone_base_lba = zone * uzonesize;
461         unsigned int zone_base_pba = zone * zonesize;
462         u16 *lba_to_pba = kcalloc(zonesize, sizeof(u16), GFP_NOIO);
463         u16 *pba_to_lba = kcalloc(zonesize, sizeof(u16), GFP_NOIO);
464         if (lba_to_pba == NULL || pba_to_lba == NULL) {
465                 result = USB_STOR_TRANSPORT_ERROR;
466                 goto error;
467         }
468
469         US_DEBUGP("alauda_read_map: Mapping blocks for zone %d\n", zone);
470
471         /* 1024 PBA's per zone */
472         for (i = 0; i < zonesize; i++)
473                 lba_to_pba[i] = pba_to_lba[i] = UNDEF;
474
475         for (i = 0; i < zonesize; i++) {
476                 blocknum = zone_base_pba + i;
477
478                 result = alauda_get_redu_data(us, blocknum, data);
479                 if (result != USB_STOR_XFER_GOOD) {
480                         result = USB_STOR_TRANSPORT_ERROR;
481                         goto error;
482                 }
483
484                 /* special PBAs have control field 0^16 */
485                 for (j = 0; j < 16; j++)
486                         if (data[j] != 0)
487                                 goto nonz;
488                 pba_to_lba[i] = UNUSABLE;
489                 US_DEBUGP("alauda_read_map: PBA %d has no logical mapping\n", blocknum);
490                 continue;
491
492         nonz:
493                 /* unwritten PBAs have control field FF^16 */
494                 for (j = 0; j < 16; j++)
495                         if (data[j] != 0xff)
496                                 goto nonff;
497                 continue;
498
499         nonff:
500                 /* normal PBAs start with six FFs */
501                 if (j < 6) {
502                         US_DEBUGP("alauda_read_map: PBA %d has no logical mapping: "
503                                "reserved area = %02X%02X%02X%02X "
504                                "data status %02X block status %02X\n",
505                                blocknum, data[0], data[1], data[2], data[3],
506                                data[4], data[5]);
507                         pba_to_lba[i] = UNUSABLE;
508                         continue;
509                 }
510
511                 if ((data[6] >> 4) != 0x01) {
512                         US_DEBUGP("alauda_read_map: PBA %d has invalid address "
513                                "field %02X%02X/%02X%02X\n",
514                                blocknum, data[6], data[7], data[11], data[12]);
515                         pba_to_lba[i] = UNUSABLE;
516                         continue;
517                 }
518
519                 /* check even parity */
520                 if (parity[data[6] ^ data[7]]) {
521                         printk("alauda_read_map: Bad parity in LBA for block %d"
522                                " (%02X %02X)\n", i, data[6], data[7]);
523                         pba_to_lba[i] = UNUSABLE;
524                         continue;
525                 }
526
527                 lba_offset = short_pack(data[7], data[6]);
528                 lba_offset = (lba_offset & 0x07FF) >> 1;
529                 lba_real = lba_offset + zone_base_lba;
530
531                 /*
532                  * Every 1024 physical blocks ("zone"), the LBA numbers
533                  * go back to zero, but are within a higher block of LBA's.
534                  * Also, there is a maximum of 1000 LBA's per zone.
535                  * In other words, in PBA 1024-2047 you will find LBA 0-999
536                  * which are really LBA 1000-1999. This allows for 24 bad
537                  * or special physical blocks per zone.
538                  */
539
540                 if (lba_offset >= uzonesize) {
541                         printk("alauda_read_map: Bad low LBA %d for block %d\n",
542                                lba_real, blocknum);
543                         continue;
544                 }
545
546                 if (lba_to_pba[lba_offset] != UNDEF) {
547                         printk("alauda_read_map: LBA %d seen for PBA %d and %d\n",
548                                lba_real, lba_to_pba[lba_offset], blocknum);
549                         continue;
550                 }
551
552                 pba_to_lba[i] = lba_real;
553                 lba_to_pba[lba_offset] = blocknum;
554                 continue;
555         }
556
557         MEDIA_INFO(us).lba_to_pba[zone] = lba_to_pba;
558         MEDIA_INFO(us).pba_to_lba[zone] = pba_to_lba;
559         result = 0;
560         goto out;
561
562 error:
563         kfree(lba_to_pba);
564         kfree(pba_to_lba);
565 out:
566         return result;
567 }
568
569 /*
570  * Checks to see whether we have already mapped a certain zone
571  * If we haven't, the map is generated
572  */
573 static void alauda_ensure_map_for_zone(struct us_data *us, unsigned int zone)
574 {
575         if (MEDIA_INFO(us).lba_to_pba[zone] == NULL
576                 || MEDIA_INFO(us).pba_to_lba[zone] == NULL)
577                 alauda_read_map(us, zone);
578 }
579
580 /*
581  * Erases an entire block
582  */
583 static int alauda_erase_block(struct us_data *us, u16 pba)
584 {
585         int rc;
586         unsigned char command[] = {
587                 ALAUDA_BULK_CMD, ALAUDA_BULK_ERASE_BLOCK, PBA_HI(pba),
588                 PBA_ZONE(pba), 0, PBA_LO(pba), 0x02, 0, MEDIA_PORT(us)
589         };
590         unsigned char buf[2];
591
592         US_DEBUGP("alauda_erase_block: Erasing PBA %d\n", pba);
593
594         rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
595                 command, 9, NULL);
596         if (rc != USB_STOR_XFER_GOOD)
597                 return rc;
598
599         rc = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
600                 buf, 2, NULL);
601         if (rc != USB_STOR_XFER_GOOD)
602                 return rc;
603
604         US_DEBUGP("alauda_erase_block: Erase result: %02X %02X\n",
605                 buf[0], buf[1]);
606         return rc;
607 }
608
609 /*
610  * Reads data from a certain offset page inside a PBA, including interleaved
611  * redundancy data. Returns (pagesize+64)*pages bytes in data.
612  */
613 static int alauda_read_block_raw(struct us_data *us, u16 pba,
614                 unsigned int page, unsigned int pages, unsigned char *data)
615 {
616         int rc;
617         unsigned char command[] = {
618                 ALAUDA_BULK_CMD, ALAUDA_BULK_READ_BLOCK, PBA_HI(pba),
619                 PBA_ZONE(pba), 0, PBA_LO(pba) + page, pages, 0, MEDIA_PORT(us)
620         };
621
622         US_DEBUGP("alauda_read_block: pba %d page %d count %d\n",
623                 pba, page, pages);
624
625         rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
626                 command, 9, NULL);
627         if (rc != USB_STOR_XFER_GOOD)
628                 return rc;
629
630         return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
631                 data, (MEDIA_INFO(us).pagesize + 64) * pages, NULL);
632 }
633
634 /*
635  * Reads data from a certain offset page inside a PBA, excluding redundancy
636  * data. Returns pagesize*pages bytes in data. Note that data must be big enough
637  * to hold (pagesize+64)*pages bytes of data, but you can ignore those 'extra'
638  * trailing bytes outside this function.
639  */
640 static int alauda_read_block(struct us_data *us, u16 pba,
641                 unsigned int page, unsigned int pages, unsigned char *data)
642 {
643         int i, rc;
644         unsigned int pagesize = MEDIA_INFO(us).pagesize;
645
646         rc = alauda_read_block_raw(us, pba, page, pages, data);
647         if (rc != USB_STOR_XFER_GOOD)
648                 return rc;
649
650         /* Cut out the redundancy data */
651         for (i = 0; i < pages; i++) {
652                 int dest_offset = i * pagesize;
653                 int src_offset = i * (pagesize + 64);
654                 memmove(data + dest_offset, data + src_offset, pagesize);
655         }
656
657         return rc;
658 }
659
660 /*
661  * Writes an entire block of data and checks status after write.
662  * Redundancy data must be already included in data. Data should be
663  * (pagesize+64)*blocksize bytes in length.
664  */
665 static int alauda_write_block(struct us_data *us, u16 pba, unsigned char *data)
666 {
667         int rc;
668         struct alauda_info *info = (struct alauda_info *) us->extra;
669         unsigned char command[] = {
670                 ALAUDA_BULK_CMD, ALAUDA_BULK_WRITE_BLOCK, PBA_HI(pba),
671                 PBA_ZONE(pba), 0, PBA_LO(pba), 32, 0, MEDIA_PORT(us)
672         };
673
674         US_DEBUGP("alauda_write_block: pba %d\n", pba);
675
676         rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
677                 command, 9, NULL);
678         if (rc != USB_STOR_XFER_GOOD)
679                 return rc;
680
681         rc = usb_stor_bulk_transfer_buf(us, info->wr_ep, data,
682                 (MEDIA_INFO(us).pagesize + 64) * MEDIA_INFO(us).blocksize,
683                 NULL);
684         if (rc != USB_STOR_XFER_GOOD)
685                 return rc;
686
687         return alauda_check_status2(us);
688 }
689
690 /*
691  * Write some data to a specific LBA.
692  */
693 static int alauda_write_lba(struct us_data *us, u16 lba,
694                  unsigned int page, unsigned int pages,
695                  unsigned char *ptr, unsigned char *blockbuffer)
696 {
697         u16 pba, lbap, new_pba;
698         unsigned char *bptr, *cptr, *xptr;
699         unsigned char ecc[3];
700         int i, result;
701         unsigned int uzonesize = MEDIA_INFO(us).uzonesize;
702         unsigned int zonesize = MEDIA_INFO(us).zonesize;
703         unsigned int pagesize = MEDIA_INFO(us).pagesize;
704         unsigned int blocksize = MEDIA_INFO(us).blocksize;
705         unsigned int lba_offset = lba % uzonesize;
706         unsigned int new_pba_offset;
707         unsigned int zone = lba / uzonesize;
708
709         alauda_ensure_map_for_zone(us, zone);
710
711         pba = MEDIA_INFO(us).lba_to_pba[zone][lba_offset];
712         if (pba == 1) {
713                 /* Maybe it is impossible to write to PBA 1.
714                    Fake success, but don't do anything. */
715                 printk("alauda_write_lba: avoid writing to pba 1\n");
716                 return USB_STOR_TRANSPORT_GOOD;
717         }
718
719         new_pba = alauda_find_unused_pba(&MEDIA_INFO(us), zone);
720         if (!new_pba) {
721                 printk("alauda_write_lba: Out of unused blocks\n");
722                 return USB_STOR_TRANSPORT_ERROR;
723         }
724
725         /* read old contents */
726         if (pba != UNDEF) {
727                 result = alauda_read_block_raw(us, pba, 0,
728                         blocksize, blockbuffer);
729                 if (result != USB_STOR_XFER_GOOD)
730                         return result;
731         } else {
732                 memset(blockbuffer, 0, blocksize * (pagesize + 64));
733         }
734
735         lbap = (lba_offset << 1) | 0x1000;
736         if (parity[MSB_of(lbap) ^ LSB_of(lbap)])
737                 lbap ^= 1;
738
739         /* check old contents and fill lba */
740         for (i = 0; i < blocksize; i++) {
741                 bptr = blockbuffer + (i * (pagesize + 64));
742                 cptr = bptr + pagesize;
743                 nand_compute_ecc(bptr, ecc);
744                 if (!nand_compare_ecc(cptr+13, ecc)) {
745                         US_DEBUGP("Warning: bad ecc in page %d- of pba %d\n",
746                                   i, pba);
747                         nand_store_ecc(cptr+13, ecc);
748                 }
749                 nand_compute_ecc(bptr + (pagesize / 2), ecc);
750                 if (!nand_compare_ecc(cptr+8, ecc)) {
751                         US_DEBUGP("Warning: bad ecc in page %d+ of pba %d\n",
752                                   i, pba);
753                         nand_store_ecc(cptr+8, ecc);
754                 }
755                 cptr[6] = cptr[11] = MSB_of(lbap);
756                 cptr[7] = cptr[12] = LSB_of(lbap);
757         }
758
759         /* copy in new stuff and compute ECC */
760         xptr = ptr;
761         for (i = page; i < page+pages; i++) {
762                 bptr = blockbuffer + (i * (pagesize + 64));
763                 cptr = bptr + pagesize;
764                 memcpy(bptr, xptr, pagesize);
765                 xptr += pagesize;
766                 nand_compute_ecc(bptr, ecc);
767                 nand_store_ecc(cptr+13, ecc);
768                 nand_compute_ecc(bptr + (pagesize / 2), ecc);
769                 nand_store_ecc(cptr+8, ecc);
770         }
771
772         result = alauda_write_block(us, new_pba, blockbuffer);
773         if (result != USB_STOR_XFER_GOOD)
774                 return result;
775
776         new_pba_offset = new_pba - (zone * zonesize);
777         MEDIA_INFO(us).pba_to_lba[zone][new_pba_offset] = lba;
778         MEDIA_INFO(us).lba_to_pba[zone][lba_offset] = new_pba;
779         US_DEBUGP("alauda_write_lba: Remapped LBA %d to PBA %d\n",
780                 lba, new_pba);
781
782         if (pba != UNDEF) {
783                 unsigned int pba_offset = pba - (zone * zonesize);
784                 result = alauda_erase_block(us, pba);
785                 if (result != USB_STOR_XFER_GOOD)
786                         return result;
787                 MEDIA_INFO(us).pba_to_lba[zone][pba_offset] = UNDEF;
788         }
789
790         return USB_STOR_TRANSPORT_GOOD;
791 }
792
793 /*
794  * Read data from a specific sector address
795  */
796 static int alauda_read_data(struct us_data *us, unsigned long address,
797                 unsigned int sectors)
798 {
799         unsigned char *buffer;
800         u16 lba, max_lba;
801         unsigned int page, len, offset;
802         unsigned int blockshift = MEDIA_INFO(us).blockshift;
803         unsigned int pageshift = MEDIA_INFO(us).pageshift;
804         unsigned int blocksize = MEDIA_INFO(us).blocksize;
805         unsigned int pagesize = MEDIA_INFO(us).pagesize;
806         unsigned int uzonesize = MEDIA_INFO(us).uzonesize;
807         struct scatterlist *sg;
808         int result;
809
810         /*
811          * Since we only read in one block at a time, we have to create
812          * a bounce buffer and move the data a piece at a time between the
813          * bounce buffer and the actual transfer buffer.
814          * We make this buffer big enough to hold temporary redundancy data,
815          * which we use when reading the data blocks.
816          */
817
818         len = min(sectors, blocksize) * (pagesize + 64);
819         buffer = kmalloc(len, GFP_NOIO);
820         if (buffer == NULL) {
821                 printk("alauda_read_data: Out of memory\n");
822                 return USB_STOR_TRANSPORT_ERROR;
823         }
824
825         /* Figure out the initial LBA and page */
826         lba = address >> blockshift;
827         page = (address & MEDIA_INFO(us).blockmask);
828         max_lba = MEDIA_INFO(us).capacity >> (blockshift + pageshift);
829
830         result = USB_STOR_TRANSPORT_GOOD;
831         offset = 0;
832         sg = NULL;
833
834         while (sectors > 0) {
835                 unsigned int zone = lba / uzonesize; /* integer division */
836                 unsigned int lba_offset = lba - (zone * uzonesize);
837                 unsigned int pages;
838                 u16 pba;
839                 alauda_ensure_map_for_zone(us, zone);
840
841                 /* Not overflowing capacity? */
842                 if (lba >= max_lba) {
843                         US_DEBUGP("Error: Requested lba %u exceeds "
844                                   "maximum %u\n", lba, max_lba);
845                         result = USB_STOR_TRANSPORT_ERROR;
846                         break;
847                 }
848
849                 /* Find number of pages we can read in this block */
850                 pages = min(sectors, blocksize - page);
851                 len = pages << pageshift;
852
853                 /* Find where this lba lives on disk */
854                 pba = MEDIA_INFO(us).lba_to_pba[zone][lba_offset];
855
856                 if (pba == UNDEF) {     /* this lba was never written */
857                         US_DEBUGP("Read %d zero pages (LBA %d) page %d\n",
858                                   pages, lba, page);
859
860                         /* This is not really an error. It just means
861                            that the block has never been written.
862                            Instead of returning USB_STOR_TRANSPORT_ERROR
863                            it is better to return all zero data. */
864
865                         memset(buffer, 0, len);
866                 } else {
867                         US_DEBUGP("Read %d pages, from PBA %d"
868                                   " (LBA %d) page %d\n",
869                                   pages, pba, lba, page);
870
871                         result = alauda_read_block(us, pba, page, pages, buffer);
872                         if (result != USB_STOR_TRANSPORT_GOOD)
873                                 break;
874                 }
875
876                 /* Store the data in the transfer buffer */
877                 usb_stor_access_xfer_buf(buffer, len, us->srb,
878                                 &sg, &offset, TO_XFER_BUF);
879
880                 page = 0;
881                 lba++;
882                 sectors -= pages;
883         }
884
885         kfree(buffer);
886         return result;
887 }
888
889 /*
890  * Write data to a specific sector address
891  */
892 static int alauda_write_data(struct us_data *us, unsigned long address,
893                 unsigned int sectors)
894 {
895         unsigned char *buffer, *blockbuffer;
896         unsigned int page, len, offset;
897         unsigned int blockshift = MEDIA_INFO(us).blockshift;
898         unsigned int pageshift = MEDIA_INFO(us).pageshift;
899         unsigned int blocksize = MEDIA_INFO(us).blocksize;
900         unsigned int pagesize = MEDIA_INFO(us).pagesize;
901         struct scatterlist *sg;
902         u16 lba, max_lba;
903         int result;
904
905         /*
906          * Since we don't write the user data directly to the device,
907          * we have to create a bounce buffer and move the data a piece
908          * at a time between the bounce buffer and the actual transfer buffer.
909          */
910
911         len = min(sectors, blocksize) * pagesize;
912         buffer = kmalloc(len, GFP_NOIO);
913         if (buffer == NULL) {
914                 printk("alauda_write_data: Out of memory\n");
915                 return USB_STOR_TRANSPORT_ERROR;
916         }
917
918         /*
919          * We also need a temporary block buffer, where we read in the old data,
920          * overwrite parts with the new data, and manipulate the redundancy data
921          */
922         blockbuffer = kmalloc((pagesize + 64) * blocksize, GFP_NOIO);
923         if (blockbuffer == NULL) {
924                 printk("alauda_write_data: Out of memory\n");
925                 kfree(buffer);
926                 return USB_STOR_TRANSPORT_ERROR;
927         }
928
929         /* Figure out the initial LBA and page */
930         lba = address >> blockshift;
931         page = (address & MEDIA_INFO(us).blockmask);
932         max_lba = MEDIA_INFO(us).capacity >> (pageshift + blockshift);
933
934         result = USB_STOR_TRANSPORT_GOOD;
935         offset = 0;
936         sg = NULL;
937
938         while (sectors > 0) {
939                 /* Write as many sectors as possible in this block */
940                 unsigned int pages = min(sectors, blocksize - page);
941                 len = pages << pageshift;
942
943                 /* Not overflowing capacity? */
944                 if (lba >= max_lba) {
945                         US_DEBUGP("alauda_write_data: Requested lba %u exceeds "
946                                   "maximum %u\n", lba, max_lba);
947                         result = USB_STOR_TRANSPORT_ERROR;
948                         break;
949                 }
950
951                 /* Get the data from the transfer buffer */
952                 usb_stor_access_xfer_buf(buffer, len, us->srb,
953                                 &sg, &offset, FROM_XFER_BUF);
954
955                 result = alauda_write_lba(us, lba, page, pages, buffer,
956                         blockbuffer);
957                 if (result != USB_STOR_TRANSPORT_GOOD)
958                         break;
959
960                 page = 0;
961                 lba++;
962                 sectors -= pages;
963         }
964
965         kfree(buffer);
966         kfree(blockbuffer);
967         return result;
968 }
969
970 /*
971  * Our interface with the rest of the world
972  */
973
974 static void alauda_info_destructor(void *extra)
975 {
976         struct alauda_info *info = (struct alauda_info *) extra;
977         int port;
978
979         if (!info)
980                 return;
981
982         for (port = 0; port < 2; port++) {
983                 struct alauda_media_info *media_info = &info->port[port];
984
985                 alauda_free_maps(media_info);
986                 kfree(media_info->lba_to_pba);
987                 kfree(media_info->pba_to_lba);
988         }
989 }
990
991 /*
992  * Initialize alauda_info struct and find the data-write endpoint
993  */
994 int init_alauda(struct us_data *us)
995 {
996         struct alauda_info *info;
997         struct usb_host_interface *altsetting = us->pusb_intf->cur_altsetting;
998         nand_init_ecc();
999
1000         us->extra = kzalloc(sizeof(struct alauda_info), GFP_NOIO);
1001         if (!us->extra) {
1002                 US_DEBUGP("init_alauda: Gah! Can't allocate storage for"
1003                         "alauda info struct!\n");
1004                 return USB_STOR_TRANSPORT_ERROR;
1005         }
1006         info = (struct alauda_info *) us->extra;
1007         us->extra_destructor = alauda_info_destructor;
1008
1009         info->wr_ep = usb_sndbulkpipe(us->pusb_dev,
1010                 altsetting->endpoint[0].desc.bEndpointAddress
1011                 & USB_ENDPOINT_NUMBER_MASK);
1012
1013         return USB_STOR_TRANSPORT_GOOD;
1014 }
1015
1016 int alauda_transport(struct scsi_cmnd *srb, struct us_data *us)
1017 {
1018         int rc;
1019         struct alauda_info *info = (struct alauda_info *) us->extra;
1020         unsigned char *ptr = us->iobuf;
1021         static unsigned char inquiry_response[36] = {
1022                 0x00, 0x80, 0x00, 0x01, 0x1F, 0x00, 0x00, 0x00
1023         };
1024
1025         if (srb->cmnd[0] == INQUIRY) {
1026                 US_DEBUGP("alauda_transport: INQUIRY. "
1027                         "Returning bogus response.\n");
1028                 memcpy(ptr, inquiry_response, sizeof(inquiry_response));
1029                 fill_inquiry_response(us, ptr, 36);
1030                 return USB_STOR_TRANSPORT_GOOD;
1031         }
1032
1033         if (srb->cmnd[0] == TEST_UNIT_READY) {
1034                 US_DEBUGP("alauda_transport: TEST_UNIT_READY.\n");
1035                 return alauda_check_media(us);
1036         }
1037
1038         if (srb->cmnd[0] == READ_CAPACITY) {
1039                 unsigned int num_zones;
1040                 unsigned long capacity;
1041
1042                 rc = alauda_check_media(us);
1043                 if (rc != USB_STOR_TRANSPORT_GOOD)
1044                         return rc;
1045
1046                 num_zones = MEDIA_INFO(us).capacity >> (MEDIA_INFO(us).zoneshift
1047                         + MEDIA_INFO(us).blockshift + MEDIA_INFO(us).pageshift);
1048
1049                 capacity = num_zones * MEDIA_INFO(us).uzonesize
1050                         * MEDIA_INFO(us).blocksize;
1051
1052                 /* Report capacity and page size */
1053                 ((__be32 *) ptr)[0] = cpu_to_be32(capacity - 1);
1054                 ((__be32 *) ptr)[1] = cpu_to_be32(512);
1055
1056                 usb_stor_set_xfer_buf(ptr, 8, srb);
1057                 return USB_STOR_TRANSPORT_GOOD;
1058         }
1059
1060         if (srb->cmnd[0] == READ_10) {
1061                 unsigned int page, pages;
1062
1063                 rc = alauda_check_media(us);
1064                 if (rc != USB_STOR_TRANSPORT_GOOD)
1065                         return rc;
1066
1067                 page = short_pack(srb->cmnd[3], srb->cmnd[2]);
1068                 page <<= 16;
1069                 page |= short_pack(srb->cmnd[5], srb->cmnd[4]);
1070                 pages = short_pack(srb->cmnd[8], srb->cmnd[7]);
1071
1072                 US_DEBUGP("alauda_transport: READ_10: page %d pagect %d\n",
1073                           page, pages);
1074
1075                 return alauda_read_data(us, page, pages);
1076         }
1077
1078         if (srb->cmnd[0] == WRITE_10) {
1079                 unsigned int page, pages;
1080
1081                 rc = alauda_check_media(us);
1082                 if (rc != USB_STOR_TRANSPORT_GOOD)
1083                         return rc;
1084
1085                 page = short_pack(srb->cmnd[3], srb->cmnd[2]);
1086                 page <<= 16;
1087                 page |= short_pack(srb->cmnd[5], srb->cmnd[4]);
1088                 pages = short_pack(srb->cmnd[8], srb->cmnd[7]);
1089
1090                 US_DEBUGP("alauda_transport: WRITE_10: page %d pagect %d\n",
1091                           page, pages);
1092
1093                 return alauda_write_data(us, page, pages);
1094         }
1095
1096         if (srb->cmnd[0] == REQUEST_SENSE) {
1097                 US_DEBUGP("alauda_transport: REQUEST_SENSE.\n");
1098
1099                 memset(ptr, 0, 18);
1100                 ptr[0] = 0xF0;
1101                 ptr[2] = info->sense_key;
1102                 ptr[7] = 11;
1103                 ptr[12] = info->sense_asc;
1104                 ptr[13] = info->sense_ascq;
1105                 usb_stor_set_xfer_buf(ptr, 18, srb);
1106
1107                 return USB_STOR_TRANSPORT_GOOD;
1108         }
1109
1110         if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) {
1111                 /* sure.  whatever.  not like we can stop the user from popping
1112                    the media out of the device (no locking doors, etc) */
1113                 return USB_STOR_TRANSPORT_GOOD;
1114         }
1115
1116         US_DEBUGP("alauda_transport: Gah! Unknown command: %d (0x%x)\n",
1117                 srb->cmnd[0], srb->cmnd[0]);
1118         info->sense_key = 0x05;
1119         info->sense_asc = 0x20;
1120         info->sense_ascq = 0x00;
1121         return USB_STOR_TRANSPORT_FAILED;
1122 }
1123