Maintainer: Pali Rohár <pali.rohar@gmail.com>
XSBC-Bugtracker: https://garage.maemo.org/tracker/?group_id=1528
Build-Depends: debhelper (>= 4.0.0), quilt, sdk-fiasco-gen, libncurses5-dev, sharutils
+Build-Depends-Indep: bzip2
Standards-Version: 3.8.0
-Package: kernel-power-flasher
+Package: kernel-power
+Architecture: armel
+Conflicts: kernel-maemo
+Description: Flashable Linux kernel (kernel power 2.6.28.10)
+ This package provides a flashable kernel image.
+ .
+ Install package kernel-power-flasher to automatically flash it.
+
+Package: kernel-power-bootimg
Section: user/system
Architecture: armel
-Pre-Depends: kernel-power (= ${binary:Version}), kernel-power-modules (= ${binary:Version}), softupd (>= 0.4.0), maemo-installer-utils
-Depends: sudo
-Conflicts: kernel-flasher-maemo (<= 2.6.28-maemo22), kernel-maemo, kernel-modules-maemo, kernel-headers-maemo, linux-kernel-headers-maemo
-Recommends: kernel-power-settings, usbip, iptables, mtd-utils, kexec-tools
+Depends: kernel-power-modules (= ${binary:Version})
+Conflicts: multiboot-kernel-power
+Recommends: multiboot, kernel-power-flasher, kernel-power-settings, usbip, iptables, mtd-utils, kexec-tools
Provides: kernel-feature-netfilter, kernel-feature-ipv6, kernel-feature-ext4, kernel-feature-xfs, kernel-feature-reiserfs,
kernel-feature-ntfs-read, kernel-feature-udf, kernel-feature-cifs, kernel-feature-automounter, kernel-feature-squashfs,
kernel-feature-unionfs, kernel-feature-crypto, kernel-feature-dmloop, kernel-feature-utf8, kernel-feature-mousejoy,
kernel-feature-usbip, kernel-feature-ppp, kernel-feature-qos, kernel-feature-block2mtd, kernel-feature-kexec,
kernel-feature-overclock, kernel-feature-joikuspot, kernel-feature-slip, kernel-feature-battery, kernel-feature-pptp,
kernel-feature-wlan-monitor, kernel-feature-radiords, kernel-feature-ioacct, kernel-feature-usbhost, kernel-feature-framebuffer
-XB-Maemo-Display-Name: Linux kernel for power user
-Description: Linux kernel updater for kernel power 2.6.28.10
- This package will flash the kernel image upon installation.
- .
- After the installation, you need to unplug the USB cable,
- completely shutdown your device, and boot again to activate the kernel.
- .
- For more details and help please visit http://wiki.maemo.org/Kernel_Power
- .
- If you want to deinstall this kernel to revert to the original Nokia kernel,
- you must run the "Deinstall kernel-power" application. Deinstallation in
- the Application Manager is not possible.
- .
- This custom kernel contains additional modules for IPv6, packet filtering,
- QoS, NAT, tunneling, kernel configuration, Wifi mesh networking,
- builtin ext3 for booting from other media, ext4, XFS, reiserfs,
- NTFS read support, ISO9660, UDF, CIFS, automounter, squashfs,
- unionfs, device mapper and dm-loop, cryptography, cryptoloop,
- EFI partitions, UTF8 codepages, mouse+joystick input, PPP, PPTP, radio RDS,
- serial support, USB/IP and generic USB device drivers, battery info,
- WLAN monitoring, overclocking, kexec and experimental USB hostmode support.
- .
- Warning: Overclocking voids your warranty, may damage your device and is at your own risk!
- Overclocking is disabled by default and can be configured during runtime.
- .
+XB-Maemo-Display-Name: Linux kernel for power user (boot image for multiboot)
+Description: Linux kernel boot image (kernel power 2.6.28.10)
+ This package provides a bootable kernel image and config file for multiboot.
XB-Maemo-Icon-26:
iVBORw0KGgoAAAANSUhEUgAAADAAAAAwCAYAAABXAvmHAAAABmJLR0QAAAAA
AAD5Q7t/AAAACXBIWXMAAABIAAAASABGyWs+AAAACXZwQWcAAAAwAAAAMADO
MDItMDZUMTk6Mjk6MjMrMDE6MDBL9SgPAAAAJXRFWHRtb2RpZnktZGF0ZQAy
MDA5LTA5LTI3VDA5OjM1OjM0KzAyOjAwrPojkwAAAABJRU5ErkJggg==
-Package: kernel-power
-Architecture: armel
-Conflicts: kernel-maemo
-Description: Flashable Linux kernel for kernel power 2.6.28.10
- This package provides a flashable kernel image.
- .
- Install package kernel-power-flasher to automatically flash it.
-
-Package: kernel-power-bootimg
+Package: kernel-power-flasher
Section: user/system
Architecture: armel
-Depends: kernel-power-modules (= ${binary:Version})
-Conflicts: multiboot-kernel-power
-Recommends: multiboot, kernel-power-flasher, kernel-power-settings, usbip, iptables, mtd-utils, kexec-tools
+Pre-Depends: kernel-power (= ${binary:Version}), kernel-power-modules (= ${binary:Version}), softupd (>= 0.4.0), maemo-installer-utils
+Depends: sudo
+Conflicts: kernel-flasher-maemo (<= 2.6.28-maemo22), kernel-maemo, kernel-modules-maemo, kernel-headers-maemo, linux-kernel-headers-maemo
+Recommends: kernel-power-settings, usbip, iptables, mtd-utils, kexec-tools
Provides: kernel-feature-netfilter, kernel-feature-ipv6, kernel-feature-ext4, kernel-feature-xfs, kernel-feature-reiserfs,
kernel-feature-ntfs-read, kernel-feature-udf, kernel-feature-cifs, kernel-feature-automounter, kernel-feature-squashfs,
kernel-feature-unionfs, kernel-feature-crypto, kernel-feature-dmloop, kernel-feature-utf8, kernel-feature-mousejoy,
kernel-feature-usbip, kernel-feature-ppp, kernel-feature-qos, kernel-feature-block2mtd, kernel-feature-kexec,
kernel-feature-overclock, kernel-feature-joikuspot, kernel-feature-slip, kernel-feature-battery, kernel-feature-pptp,
kernel-feature-wlan-monitor, kernel-feature-radiords, kernel-feature-ioacct, kernel-feature-usbhost, kernel-feature-framebuffer
-XB-Maemo-Display-Name: Linux kernel for power user (boot image)
-Description: Linux kernel boot image for kernel power 2.6.28.10
- This package provides a bootable kernel image and config file for multiboot.
+XB-Maemo-Display-Name: Linux kernel for power user
+Description: Linux kernel updater (kernel power 2.6.28.10)
+ This package will flash the kernel image upon installation.
+ .
+ After the installation, you need to unplug the USB cable,
+ completely shutdown your device, and boot again to activate the kernel.
+ .
+ For more details and help please visit http://wiki.maemo.org/Kernel_Power
+ .
+ If you want to deinstall this kernel to revert to the original Nokia kernel,
+ you must run the "Deinstall kernel-power" application. Deinstallation in
+ the Application Manager is not possible.
+ .
+ This custom kernel contains additional modules for IPv6, packet filtering,
+ QoS, NAT, tunneling, kernel configuration, Wifi mesh networking,
+ builtin ext3 for booting from other media, ext4, XFS, reiserfs,
+ NTFS read support, ISO9660, UDF, CIFS, automounter, squashfs,
+ unionfs, device mapper and dm-loop, cryptography, cryptoloop,
+ EFI partitions, UTF8 codepages, mouse+joystick input, PPP, PPTP, radio RDS,
+ serial support, USB/IP and generic USB device drivers, battery info,
+ WLAN monitoring, overclocking, kexec and experimental USB hostmode support.
+ .
+ Warning: Overclocking voids your warranty, may damage your device and is at your own risk!
+ Overclocking is disabled by default and can be configured during runtime.
+ .
XB-Maemo-Icon-26:
iVBORw0KGgoAAAANSUhEUgAAADAAAAAwCAYAAABXAvmHAAAABmJLR0QAAAAA
AAD5Q7t/AAAACXBIWXMAAABIAAAASABGyWs+AAAACXZwQWcAAAAwAAAAMADO
Architecture: armel
Depends: ${shlibs:Depends}
Conflicts: kernel-headers-maemo
-Description: Linux kernel headers for kernel power 2.6.28.10
+Description: Linux kernel headers (kernel power 2.6.28.10)
This package provides kernel headers.
Package: linux-kernel-power-headers
-Architecture: armel
+Architecture: any
Depends: ${shlibs:Depends}
Conflicts: linux-kernel-headers-maemo, linux-kernel-headers
-Description: Linux Kernel Headers for development from kernel power 2.6.28.10
+Description: Linux Kernel Headers for development (kernel power 2.6.28.10)
This package provides headers from the Linux kernel. These headers
are used by the installed headers for GNU glibc and other system libraries.
Depends: module-init-tools (>= 3.3), kernel-power (= ${binary:Version}) | kernel-power-bootimg (= ${binary:Version})
Description: Linux kernel modules for kernel power 2.6.28.10
This package provides kernel modules.
+
+Package: kernel-power-modules-debug
+Architecture: armel
+Depends: module-init-tools (>= 3.3), kernel-power-modules
+Description: Linux kernel modules for debugging (kernel power 2.6.28.10)
+ This package provides kernel modules needed for debugging and profiling.
+
+Package: kernel-power-debug
+Architecture: armel
+Description: Linux kernel debug symblos for kernel power 2.6.28.10
+ This packages provides vmlinux file for the kernel and
+ kernel modules related to debugging.
+
+Package: kernel-power-source
+Architecture: all
+Section: devel
+Priority: optional
+Provides: kernel-source-2.6
+Recommends: libc6-dev | libc-dev, gcc, make, binutils, bzip2
+Description: Linux kernel sources for rx-51 product (kernel power 2.6.28.10)
+ This package provides the source code for the Linux kernel.
projects / kernel-power / commitdiff