# maximum frequency to use
MAXFREQ=600
# list of frequency configurations: each "frequency:volt,dsprate"
-FREQS="0:30,90 125:30,90 250:38,180 500:48,360 550:54,400 600:60,430 700:60,430 750:60,430 805:60,430 850:60,500 900:60,500 950:60,500 1000:60,500 1100:72,520 1150:72,520"
-SMARTREFLEX_VDD1=0
-SMARTREFLEX_VDD2=0
+FREQS="0:30,90 125:30,90 250:38,180 500:48,360 550:54,400 600:60,430 720:60,430 805:60,430 850:60,500 900:60,500 950:60,500 1000:60,500 1100:72,520 1150:72,520"
+SMARTREFLEX_VDD1=1
+SMARTREFLEX_VDD2=1
GOVERNOR=ondemand
UP_THRESHOLD=95
SAMPLING_RATE=300000
--- /dev/null
+# DO NOT EDIT THIS FILE - CREATE A COPY OF IT FOR CUSTOMIZATION
+# minimum frequency to use
+MINFREQ=250
+# maximum frequency to use
+MAXFREQ=805
+# list of frequency configurations: each "frequency:volt,dsprate"
+FREQS="0:30,90 125:30,90 250:38,180 500:48,360 550:54,400 600:60,430 720:60,520 805:60,600 850:60,600 900:60,600 950:60,600 1000:60,600 1100:72,600 1150:72,600"
+SMARTREFLEX_VDD1=1
+SMARTREFLEX_VDD2=1
+GOVERNOR=ondemand
+UP_THRESHOLD=95
+SAMPLING_RATE=300000
+IGNORE_NICE_LOAD=0
+POWERSAVE_BIAS=0
# maximum frequency to use
MAXFREQ=850
# list of frequency configurations: each "frequency:volt,dsprate"
-FREQS="500:30,360 550:33,400 600:38,430 700:45,430 750:45,430 805:48,430 850:48,500 900:54,500 950:54,500 1000:60,500 1100:72,520 1150:72,520"
+FREQS="500:30,360 550:33,400 600:38,430 720:45,430 805:48,430 850:48,500 900:54,500 950:54,500 1000:60,500 1100:72,520 1150:72,520"
SMARTREFLEX_VDD1=0
SMARTREFLEX_VDD2=0
GOVERNOR=ondemand
# maximum frequency to use
MAXFREQ=600
# list of frequency configurations: each "frequency:volt,dsprate"
-FREQS="0:30,90 125:30,90 250:38,180 500:48,360 550:48,400 600:54,430 700:54,430 750:54,430 805:54,430 850:54,500 900:54,500 950:54,500 1000:60,500 1100:72,520 1150:72,520"
+FREQS="0:30,90 125:30,90 250:38,180 500:48,360 550:48,400 600:54,430 720:54,430 805:54,430 850:54,500 900:54,500 950:54,500 1000:60,500 1100:72,520 1150:72,520"
SMARTREFLEX_VDD1=0
SMARTREFLEX_VDD2=0
GOVERNOR=ondemand
# maximum frequency to use
MAXFREQ=600
# list of frequency configurations: each "frequency:volt,dsprate"
-FREQS="0:22,90 125:22,90 250:28,180 500:29,360 550:32,400 600:34,430 700:41,430 750:42,430 805:45,430 850:46,500 900:49,500 950:52,500 1000:55,500 1100:63,520 1150:69,520"
+FREQS="0:22,90 125:22,90 250:28,180 500:29,360 550:32,400 600:34,430 720:42,430 805:45,430 850:46,500 900:49,500 950:52,500 1000:55,500 1100:63,520 1150:69,520"
SMARTREFLEX_VDD1=0
SMARTREFLEX_VDD2=0
GOVERNOR=ondemand
# maximum frequency to use
MAXFREQ=600
# list of frequency configurations: each "frequency:volt,dsprate"
-FREQS="0:25,90 125:25,90 250:25,180 500:33,360 550:38,400 600:38,430 700:45,430 750:45,430 805:48,430 850:48,500 900:54,500 950:54,500 1000:60,500 1100:72,520 1150:72,520"
+FREQS="0:25,90 125:25,90 250:25,180 500:33,360 550:38,400 600:38,430 720:45,430 805:48,430 850:48,500 900:54,500 950:54,500 1000:60,500 1100:72,520 1150:72,520"
SMARTREFLEX_VDD1=0
SMARTREFLEX_VDD2=0
GOVERNOR=ondemand
# maximum frequency to use
MAXFREQ=600
# list of frequency configurations: each "frequency:volt,dsprate"
-FREQS="0:20,90 125:20,90 250:30,180 500:33,360 550:38,400 600:38,430 700:45,430 750:45,430 805:48,430 850:48,500 900:54,500 950:54,500 1000:60,500 1100:72,520 1150:72,520"
+FREQS="0:20,90 125:20,90 250:30,180 500:33,360 550:38,400 600:38,430 720:45,430 805:48,430 850:48,500 900:54,500 950:54,500 1000:60,500 1100:72,520 1150:72,520"
SMARTREFLEX_VDD1=0
SMARTREFLEX_VDD2=0
GOVERNOR=ondemand
+kernel-power-settings (0.13) fremantle; urgency=low
+
+ * changes by Ivaylo Dimitrov <freemangordon@abv.bg>:
+ * added 720MHz, removed 700MHz and 750MHz
+ * SmartReflex enabled in default profile
+ * kernel-config updated to reflect new frequencies set
+ * added new profile (dsp) for DSP overclock
+
+ -- Pali Rohár <pali.rohar@gmail.com> Sun, 30 Oct 2011 11:15:56 +0200
+
kernel-power-settings (0.12) fremantle; urgency=low
* updated debian files
avoid=
test $gov = ondemand && avoid=`cat $cfd/avoid_frequencies`
freqs=
- for f in 0 $allfreq; do
+ for f in $allfreq; do
popvsel $vsel
poprate $rate
case " $avoid " in *" $f "*) ;;
test -z "$volt" && test -z "$dsp" && continue
tvsel=
trate=
- for fr in 0 $allfreq; do
+ for fr in $allfreq; do
if test $fr = $freq; then
popvsel $vsel
poprate $rate