net: add fd_readv() handler to qemu_new_vlan_client() args
[qemu] / hw / mcf_fec.c
1 /*
2  * ColdFire Fast Ethernet Controller emulation.
3  *
4  * Copyright (c) 2007 CodeSourcery.
5  *
6  * This code is licenced under the GPL
7  */
8 #include "hw.h"
9 #include "net.h"
10 #include "mcf.h"
11 /* For crc32 */
12 #include <zlib.h>
13
14 //#define DEBUG_FEC 1
15
16 #ifdef DEBUG_FEC
17 #define DPRINTF(fmt, ...) \
18 do { printf("mcf_fec: " fmt , ## __VA_ARGS__); } while (0)
19 #else
20 #define DPRINTF(fmt, ...) do {} while(0)
21 #endif
22
23 #define FEC_MAX_FRAME_SIZE 2032
24
25 typedef struct {
26     qemu_irq *irq;
27     int mmio_index;
28     VLANClientState *vc;
29     uint32_t irq_state;
30     uint32_t eir;
31     uint32_t eimr;
32     int rx_enabled;
33     uint32_t rx_descriptor;
34     uint32_t tx_descriptor;
35     uint32_t ecr;
36     uint32_t mmfr;
37     uint32_t mscr;
38     uint32_t rcr;
39     uint32_t tcr;
40     uint32_t tfwr;
41     uint32_t rfsr;
42     uint32_t erdsr;
43     uint32_t etdsr;
44     uint32_t emrbr;
45     uint8_t macaddr[6];
46 } mcf_fec_state;
47
48 #define FEC_INT_HB   0x80000000
49 #define FEC_INT_BABR 0x40000000
50 #define FEC_INT_BABT 0x20000000
51 #define FEC_INT_GRA  0x10000000
52 #define FEC_INT_TXF  0x08000000
53 #define FEC_INT_TXB  0x04000000
54 #define FEC_INT_RXF  0x02000000
55 #define FEC_INT_RXB  0x01000000
56 #define FEC_INT_MII  0x00800000
57 #define FEC_INT_EB   0x00400000
58 #define FEC_INT_LC   0x00200000
59 #define FEC_INT_RL   0x00100000
60 #define FEC_INT_UN   0x00080000
61
62 #define FEC_EN      2
63 #define FEC_RESET   1
64
65 /* Map interrupt flags onto IRQ lines.  */
66 #define FEC_NUM_IRQ 13
67 static const uint32_t mcf_fec_irq_map[FEC_NUM_IRQ] = {
68     FEC_INT_TXF,
69     FEC_INT_TXB,
70     FEC_INT_UN,
71     FEC_INT_RL,
72     FEC_INT_RXF,
73     FEC_INT_RXB,
74     FEC_INT_MII,
75     FEC_INT_LC,
76     FEC_INT_HB,
77     FEC_INT_GRA,
78     FEC_INT_EB,
79     FEC_INT_BABT,
80     FEC_INT_BABR
81 };
82
83 /* Buffer Descriptor.  */
84 typedef struct {
85     uint16_t flags;
86     uint16_t length;
87     uint32_t data;
88 } mcf_fec_bd;
89
90 #define FEC_BD_R    0x8000
91 #define FEC_BD_E    0x8000
92 #define FEC_BD_O1   0x4000
93 #define FEC_BD_W    0x2000
94 #define FEC_BD_O2   0x1000
95 #define FEC_BD_L    0x0800
96 #define FEC_BD_TC   0x0400
97 #define FEC_BD_ABC  0x0200
98 #define FEC_BD_M    0x0100
99 #define FEC_BD_BC   0x0080
100 #define FEC_BD_MC   0x0040
101 #define FEC_BD_LG   0x0020
102 #define FEC_BD_NO   0x0010
103 #define FEC_BD_CR   0x0004
104 #define FEC_BD_OV   0x0002
105 #define FEC_BD_TR   0x0001
106
107 static void mcf_fec_read_bd(mcf_fec_bd *bd, uint32_t addr)
108 {
109     cpu_physical_memory_read(addr, (uint8_t *)bd, sizeof(*bd));
110     be16_to_cpus(&bd->flags);
111     be16_to_cpus(&bd->length);
112     be32_to_cpus(&bd->data);
113 }
114
115 static void mcf_fec_write_bd(mcf_fec_bd *bd, uint32_t addr)
116 {
117     mcf_fec_bd tmp;
118     tmp.flags = cpu_to_be16(bd->flags);
119     tmp.length = cpu_to_be16(bd->length);
120     tmp.data = cpu_to_be32(bd->data);
121     cpu_physical_memory_write(addr, (uint8_t *)&tmp, sizeof(tmp));
122 }
123
124 static void mcf_fec_update(mcf_fec_state *s)
125 {
126     uint32_t active;
127     uint32_t changed;
128     uint32_t mask;
129     int i;
130
131     active = s->eir & s->eimr;
132     changed = active ^s->irq_state;
133     for (i = 0; i < FEC_NUM_IRQ; i++) {
134         mask = mcf_fec_irq_map[i];
135         if (changed & mask) {
136             DPRINTF("IRQ %d = %d\n", i, (active & mask) != 0);
137             qemu_set_irq(s->irq[i], (active & mask) != 0);
138         }
139     }
140     s->irq_state = active;
141 }
142
143 static void mcf_fec_do_tx(mcf_fec_state *s)
144 {
145     uint32_t addr;
146     mcf_fec_bd bd;
147     int frame_size;
148     int len;
149     uint8_t frame[FEC_MAX_FRAME_SIZE];
150     uint8_t *ptr;
151
152     DPRINTF("do_tx\n");
153     ptr = frame;
154     frame_size = 0;
155     addr = s->tx_descriptor;
156     while (1) {
157         mcf_fec_read_bd(&bd, addr);
158         DPRINTF("tx_bd %x flags %04x len %d data %08x\n",
159                 addr, bd.flags, bd.length, bd.data);
160         if ((bd.flags & FEC_BD_R) == 0) {
161             /* Run out of descriptors to transmit.  */
162             break;
163         }
164         len = bd.length;
165         if (frame_size + len > FEC_MAX_FRAME_SIZE) {
166             len = FEC_MAX_FRAME_SIZE - frame_size;
167             s->eir |= FEC_INT_BABT;
168         }
169         cpu_physical_memory_read(bd.data, ptr, len);
170         ptr += len;
171         frame_size += len;
172         if (bd.flags & FEC_BD_L) {
173             /* Last buffer in frame.  */
174             DPRINTF("Sending packet\n");
175             qemu_send_packet(s->vc, frame, len);
176             ptr = frame;
177             frame_size = 0;
178             s->eir |= FEC_INT_TXF;
179         }
180         s->eir |= FEC_INT_TXB;
181         bd.flags &= ~FEC_BD_R;
182         /* Write back the modified descriptor.  */
183         mcf_fec_write_bd(&bd, addr);
184         /* Advance to the next descriptor.  */
185         if ((bd.flags & FEC_BD_W) != 0) {
186             addr = s->etdsr;
187         } else {
188             addr += 8;
189         }
190     }
191     s->tx_descriptor = addr;
192 }
193
194 static void mcf_fec_enable_rx(mcf_fec_state *s)
195 {
196     mcf_fec_bd bd;
197
198     mcf_fec_read_bd(&bd, s->rx_descriptor);
199     s->rx_enabled = ((bd.flags & FEC_BD_E) != 0);
200     if (!s->rx_enabled)
201         DPRINTF("RX buffer full\n");
202 }
203
204 static void mcf_fec_reset(mcf_fec_state *s)
205 {
206     s->eir = 0;
207     s->eimr = 0;
208     s->rx_enabled = 0;
209     s->ecr = 0;
210     s->mscr = 0;
211     s->rcr = 0x05ee0001;
212     s->tcr = 0;
213     s->tfwr = 0;
214     s->rfsr = 0x500;
215 }
216
217 static uint32_t mcf_fec_read(void *opaque, target_phys_addr_t addr)
218 {
219     mcf_fec_state *s = (mcf_fec_state *)opaque;
220     switch (addr & 0x3ff) {
221     case 0x004: return s->eir;
222     case 0x008: return s->eimr;
223     case 0x010: return s->rx_enabled ? (1 << 24) : 0; /* RDAR */
224     case 0x014: return 0; /* TDAR */
225     case 0x024: return s->ecr;
226     case 0x040: return s->mmfr;
227     case 0x044: return s->mscr;
228     case 0x064: return 0; /* MIBC */
229     case 0x084: return s->rcr;
230     case 0x0c4: return s->tcr;
231     case 0x0e4: /* PALR */
232         return (s->macaddr[0] << 24) | (s->macaddr[1] << 16)
233               | (s->macaddr[2] << 8) | s->macaddr[3];
234         break;
235     case 0x0e8: /* PAUR */
236         return (s->macaddr[4] << 24) | (s->macaddr[5] << 16) | 0x8808;
237     case 0x0ec: return 0x10000; /* OPD */
238     case 0x118: return 0;
239     case 0x11c: return 0;
240     case 0x120: return 0;
241     case 0x124: return 0;
242     case 0x144: return s->tfwr;
243     case 0x14c: return 0x600;
244     case 0x150: return s->rfsr;
245     case 0x180: return s->erdsr;
246     case 0x184: return s->etdsr;
247     case 0x188: return s->emrbr;
248     default:
249         hw_error("mcf_fec_read: Bad address 0x%x\n", (int)addr);
250         return 0;
251     }
252 }
253
254 static void mcf_fec_write(void *opaque, target_phys_addr_t addr, uint32_t value)
255 {
256     mcf_fec_state *s = (mcf_fec_state *)opaque;
257     switch (addr & 0x3ff) {
258     case 0x004:
259         s->eir &= ~value;
260         break;
261     case 0x008:
262         s->eimr = value;
263         break;
264     case 0x010: /* RDAR */
265         if ((s->ecr & FEC_EN) && !s->rx_enabled) {
266             DPRINTF("RX enable\n");
267             mcf_fec_enable_rx(s);
268         }
269         break;
270     case 0x014: /* TDAR */
271         if (s->ecr & FEC_EN) {
272             mcf_fec_do_tx(s);
273         }
274         break;
275     case 0x024:
276         s->ecr = value;
277         if (value & FEC_RESET) {
278             DPRINTF("Reset\n");
279             mcf_fec_reset(s);
280         }
281         if ((s->ecr & FEC_EN) == 0) {
282             s->rx_enabled = 0;
283         }
284         break;
285     case 0x040:
286         /* TODO: Implement MII.  */
287         s->mmfr = value;
288         break;
289     case 0x044:
290         s->mscr = value & 0xfe;
291         break;
292     case 0x064:
293         /* TODO: Implement MIB.  */
294         break;
295     case 0x084:
296         s->rcr = value & 0x07ff003f;
297         /* TODO: Implement LOOP mode.  */
298         break;
299     case 0x0c4: /* TCR */
300         /* We transmit immediately, so raise GRA immediately.  */
301         s->tcr = value;
302         if (value & 1)
303             s->eir |= FEC_INT_GRA;
304         break;
305     case 0x0e4: /* PALR */
306         s->macaddr[0] = value >> 24;
307         s->macaddr[1] = value >> 16;
308         s->macaddr[2] = value >> 8;
309         s->macaddr[3] = value;
310         break;
311     case 0x0e8: /* PAUR */
312         s->macaddr[4] = value >> 24;
313         s->macaddr[5] = value >> 16;
314         break;
315     case 0x0ec:
316         /* OPD */
317         break;
318     case 0x118:
319     case 0x11c:
320     case 0x120:
321     case 0x124:
322         /* TODO: implement MAC hash filtering.  */
323         break;
324     case 0x144:
325         s->tfwr = value & 3;
326         break;
327     case 0x14c:
328         /* FRBR writes ignored.  */
329         break;
330     case 0x150:
331         s->rfsr = (value & 0x3fc) | 0x400;
332         break;
333     case 0x180:
334         s->erdsr = value & ~3;
335         s->rx_descriptor = s->erdsr;
336         break;
337     case 0x184:
338         s->etdsr = value & ~3;
339         s->tx_descriptor = s->etdsr;
340         break;
341     case 0x188:
342         s->emrbr = value & 0x7f0;
343         break;
344     default:
345         hw_error("mcf_fec_write Bad address 0x%x\n", (int)addr);
346     }
347     mcf_fec_update(s);
348 }
349
350 static int mcf_fec_can_receive(void *opaque)
351 {
352     mcf_fec_state *s = (mcf_fec_state *)opaque;
353     return s->rx_enabled;
354 }
355
356 static void mcf_fec_receive(void *opaque, const uint8_t *buf, int size)
357 {
358     mcf_fec_state *s = (mcf_fec_state *)opaque;
359     mcf_fec_bd bd;
360     uint32_t flags = 0;
361     uint32_t addr;
362     uint32_t crc;
363     uint32_t buf_addr;
364     uint8_t *crc_ptr;
365     unsigned int buf_len;
366
367     DPRINTF("do_rx len %d\n", size);
368     if (!s->rx_enabled) {
369         fprintf(stderr, "mcf_fec_receive: Unexpected packet\n");
370     }
371     /* 4 bytes for the CRC.  */
372     size += 4;
373     crc = cpu_to_be32(crc32(~0, buf, size));
374     crc_ptr = (uint8_t *)&crc;
375     /* Huge frames are truncted.  */
376     if (size > FEC_MAX_FRAME_SIZE) {
377         size = FEC_MAX_FRAME_SIZE;
378         flags |= FEC_BD_TR | FEC_BD_LG;
379     }
380     /* Frames larger than the user limit just set error flags.  */
381     if (size > (s->rcr >> 16)) {
382         flags |= FEC_BD_LG;
383     }
384     addr = s->rx_descriptor;
385     while (size > 0) {
386         mcf_fec_read_bd(&bd, addr);
387         if ((bd.flags & FEC_BD_E) == 0) {
388             /* No descriptors available.  Bail out.  */
389             /* FIXME: This is wrong.  We should probably either save the
390                remainder for when more RX buffers are available, or
391                flag an error.  */
392             fprintf(stderr, "mcf_fec: Lost end of frame\n");
393             break;
394         }
395         buf_len = (size <= s->emrbr) ? size: s->emrbr;
396         bd.length = buf_len;
397         size -= buf_len;
398         DPRINTF("rx_bd %x length %d\n", addr, bd.length);
399         /* The last 4 bytes are the CRC.  */
400         if (size < 4)
401             buf_len += size - 4;
402         buf_addr = bd.data;
403         cpu_physical_memory_write(buf_addr, buf, buf_len);
404         buf += buf_len;
405         if (size < 4) {
406             cpu_physical_memory_write(buf_addr + buf_len, crc_ptr, 4 - size);
407             crc_ptr += 4 - size;
408         }
409         bd.flags &= ~FEC_BD_E;
410         if (size == 0) {
411             /* Last buffer in frame.  */
412             bd.flags |= flags | FEC_BD_L;
413             DPRINTF("rx frame flags %04x\n", bd.flags);
414             s->eir |= FEC_INT_RXF;
415         } else {
416             s->eir |= FEC_INT_RXB;
417         }
418         mcf_fec_write_bd(&bd, addr);
419         /* Advance to the next descriptor.  */
420         if ((bd.flags & FEC_BD_W) != 0) {
421             addr = s->erdsr;
422         } else {
423             addr += 8;
424         }
425     }
426     s->rx_descriptor = addr;
427     mcf_fec_enable_rx(s);
428     mcf_fec_update(s);
429 }
430
431 static CPUReadMemoryFunc *mcf_fec_readfn[] = {
432    mcf_fec_read,
433    mcf_fec_read,
434    mcf_fec_read
435 };
436
437 static CPUWriteMemoryFunc *mcf_fec_writefn[] = {
438    mcf_fec_write,
439    mcf_fec_write,
440    mcf_fec_write
441 };
442
443 static void mcf_fec_cleanup(VLANClientState *vc)
444 {
445     mcf_fec_state *s = vc->opaque;
446
447     cpu_unregister_io_memory(s->mmio_index);
448
449     qemu_free(s);
450 }
451
452 void mcf_fec_init(NICInfo *nd, target_phys_addr_t base, qemu_irq *irq)
453 {
454     mcf_fec_state *s;
455
456     qemu_check_nic_model(nd, "mcf_fec");
457
458     s = (mcf_fec_state *)qemu_mallocz(sizeof(mcf_fec_state));
459     s->irq = irq;
460     s->mmio_index = cpu_register_io_memory(0, mcf_fec_readfn,
461                                            mcf_fec_writefn, s);
462     cpu_register_physical_memory(base, 0x400, s->mmio_index);
463
464     s->vc = qemu_new_vlan_client(nd->vlan, nd->model, nd->name,
465                                  mcf_fec_can_receive, mcf_fec_receive, NULL,
466                                  mcf_fec_cleanup, s);
467     memcpy(s->macaddr, nd->macaddr, 6);
468     qemu_format_nic_info_str(s->vc, s->macaddr);
469 }