remove noise for demo
[qemu] / hw / mips_r4k.c
1 /*
2  * QEMU/MIPS pseudo-board
3  *
4  * emulates a simple machine with ISA-like bus.
5  * ISA IO space mapped to the 0x14000000 (PHYS) and
6  * ISA memory at the 0x10000000 (PHYS, 16Mb in size).
7  * All peripherial devices are attached to this "bus" with
8  * the standard PC ISA addresses.
9 */
10 #include "hw.h"
11 #include "mips.h"
12 #include "pc.h"
13 #include "isa.h"
14 #include "net.h"
15 #include "sysemu.h"
16 #include "boards.h"
17 #include "flash.h"
18 #include "qemu-log.h"
19
20 #ifdef TARGET_WORDS_BIGENDIAN
21 #define BIOS_FILENAME "mips_bios.bin"
22 #else
23 #define BIOS_FILENAME "mipsel_bios.bin"
24 #endif
25
26 #define PHYS_TO_VIRT(x) ((x) | ~(target_ulong)0x7fffffff)
27
28 #define VIRT_TO_PHYS_ADDEND (-((int64_t)(int32_t)0x80000000))
29
30 #define MAX_IDE_BUS 2
31
32 static const int ide_iobase[2] = { 0x1f0, 0x170 };
33 static const int ide_iobase2[2] = { 0x3f6, 0x376 };
34 static const int ide_irq[2] = { 14, 15 };
35
36 static int serial_io[MAX_SERIAL_PORTS] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 };
37 static int serial_irq[MAX_SERIAL_PORTS] = { 4, 3, 4, 3 };
38
39 static PITState *pit; /* PIT i8254 */
40
41 /* i8254 PIT is attached to the IRQ0 at PIC i8259 */
42
43 static struct _loaderparams {
44     int ram_size;
45     const char *kernel_filename;
46     const char *kernel_cmdline;
47     const char *initrd_filename;
48 } loaderparams;
49
50 static void mips_qemu_writel (void *opaque, target_phys_addr_t addr,
51                               uint32_t val)
52 {
53     if ((addr & 0xffff) == 0 && val == 42)
54         qemu_system_reset_request ();
55     else if ((addr & 0xffff) == 4 && val == 42)
56         qemu_system_shutdown_request ();
57 }
58
59 static uint32_t mips_qemu_readl (void *opaque, target_phys_addr_t addr)
60 {
61     return 0;
62 }
63
64 static CPUWriteMemoryFunc *mips_qemu_write[] = {
65     &mips_qemu_writel,
66     &mips_qemu_writel,
67     &mips_qemu_writel,
68 };
69
70 static CPUReadMemoryFunc *mips_qemu_read[] = {
71     &mips_qemu_readl,
72     &mips_qemu_readl,
73     &mips_qemu_readl,
74 };
75
76 static int mips_qemu_iomemtype = 0;
77
78 static void load_kernel (CPUState *env)
79 {
80     int64_t entry, kernel_low, kernel_high;
81     long kernel_size, initrd_size;
82     ram_addr_t initrd_offset;
83
84     kernel_size = load_elf(loaderparams.kernel_filename, VIRT_TO_PHYS_ADDEND,
85                            (uint64_t *)&entry, (uint64_t *)&kernel_low,
86                            (uint64_t *)&kernel_high);
87     if (kernel_size >= 0) {
88         if ((entry & ~0x7fffffffULL) == 0x80000000)
89             entry = (int32_t)entry;
90         env->active_tc.PC = entry;
91     } else {
92         fprintf(stderr, "qemu: could not load kernel '%s'\n",
93                 loaderparams.kernel_filename);
94         exit(1);
95     }
96
97     /* load initrd */
98     initrd_size = 0;
99     initrd_offset = 0;
100     if (loaderparams.initrd_filename) {
101         initrd_size = get_image_size (loaderparams.initrd_filename);
102         if (initrd_size > 0) {
103             initrd_offset = (kernel_high + ~TARGET_PAGE_MASK) & TARGET_PAGE_MASK;
104             if (initrd_offset + initrd_size > ram_size) {
105                 fprintf(stderr,
106                         "qemu: memory too small for initial ram disk '%s'\n",
107                         loaderparams.initrd_filename);
108                 exit(1);
109             }
110             initrd_size = load_image(loaderparams.initrd_filename,
111                                      phys_ram_base + initrd_offset);
112         }
113         if (initrd_size == (target_ulong) -1) {
114             fprintf(stderr, "qemu: could not load initial ram disk '%s'\n",
115                     loaderparams.initrd_filename);
116             exit(1);
117         }
118     }
119
120     /* Store command line.  */
121     if (initrd_size > 0) {
122         int ret;
123         ret = sprintf((char *)(phys_ram_base + (16 << 20) - 256),
124                       "rd_start=0x" TARGET_FMT_lx " rd_size=%li ",
125                       PHYS_TO_VIRT((uint32_t)initrd_offset),
126                       initrd_size);
127         strcpy ((char *)(phys_ram_base + (16 << 20) - 256 + ret),
128                 loaderparams.kernel_cmdline);
129     }
130     else {
131         strcpy ((char *)(phys_ram_base + (16 << 20) - 256),
132                 loaderparams.kernel_cmdline);
133     }
134
135     *(int32_t *)(phys_ram_base + (16 << 20) - 260) = tswap32 (0x12345678);
136     *(int32_t *)(phys_ram_base + (16 << 20) - 264) = tswap32 (ram_size);
137 }
138
139 static void main_cpu_reset(void *opaque)
140 {
141     CPUState *env = opaque;
142     cpu_reset(env);
143
144     if (loaderparams.kernel_filename)
145         load_kernel (env);
146 }
147
148 static const int sector_len = 32 * 1024;
149 static
150 void mips_r4k_init (ram_addr_t ram_size, int vga_ram_size,
151                     const char *boot_device,
152                     const char *kernel_filename, const char *kernel_cmdline,
153                     const char *initrd_filename, const char *cpu_model)
154 {
155     char buf[1024];
156     unsigned long bios_offset;
157     int bios_size;
158     CPUState *env;
159     RTCState *rtc_state;
160     int i;
161     qemu_irq *i8259;
162     int index;
163     BlockDriverState *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
164
165     /* init CPUs */
166     if (cpu_model == NULL) {
167 #ifdef TARGET_MIPS64
168         cpu_model = "R4000";
169 #else
170         cpu_model = "24Kf";
171 #endif
172     }
173     env = cpu_init(cpu_model);
174     if (!env) {
175         fprintf(stderr, "Unable to find CPU definition\n");
176         exit(1);
177     }
178     qemu_register_reset(main_cpu_reset, env);
179
180     /* allocate RAM */
181     if (ram_size > (256 << 20)) {
182         fprintf(stderr,
183                 "qemu: Too much memory for this machine: %d MB, maximum 256 MB\n",
184                 ((unsigned int)ram_size / (1 << 20)));
185         exit(1);
186     }
187     cpu_register_physical_memory(0, ram_size, IO_MEM_RAM);
188
189     if (!mips_qemu_iomemtype) {
190         mips_qemu_iomemtype = cpu_register_io_memory(0, mips_qemu_read,
191                                                      mips_qemu_write, NULL);
192     }
193     cpu_register_physical_memory(0x1fbf0000, 0x10000, mips_qemu_iomemtype);
194
195     /* Try to load a BIOS image. If this fails, we continue regardless,
196        but initialize the hardware ourselves. When a kernel gets
197        preloaded we also initialize the hardware, since the BIOS wasn't
198        run. */
199     bios_offset = ram_size + vga_ram_size;
200     if (bios_name == NULL)
201         bios_name = BIOS_FILENAME;
202     snprintf(buf, sizeof(buf), "%s/%s", bios_dir, bios_name);
203     bios_size = load_image(buf, phys_ram_base + bios_offset);
204     if ((bios_size > 0) && (bios_size <= BIOS_SIZE)) {
205         cpu_register_physical_memory(0x1fc00000,
206                                      BIOS_SIZE, bios_offset | IO_MEM_ROM);
207     } else if ((index = drive_get_index(IF_PFLASH, 0, 0)) > -1) {
208         uint32_t mips_rom = 0x00400000;
209         cpu_register_physical_memory(0x1fc00000, mips_rom,
210                              qemu_ram_alloc(mips_rom) | IO_MEM_ROM);
211         if (!pflash_cfi01_register(0x1fc00000, qemu_ram_alloc(mips_rom),
212             drives_table[index].bdrv, sector_len, mips_rom / sector_len,
213             4, 0, 0, 0, 0)) {
214             fprintf(stderr, "qemu: Error registering flash memory.\n");
215         }
216     }
217     else {
218         /* not fatal */
219         fprintf(stderr, "qemu: Warning, could not load MIPS bios '%s'\n",
220                 buf);
221     }
222
223     if (kernel_filename) {
224         loaderparams.ram_size = ram_size;
225         loaderparams.kernel_filename = kernel_filename;
226         loaderparams.kernel_cmdline = kernel_cmdline;
227         loaderparams.initrd_filename = initrd_filename;
228         load_kernel (env);
229     }
230
231     /* Init CPU internal devices */
232     cpu_mips_irq_init_cpu(env);
233     cpu_mips_clock_init(env);
234
235     /* The PIC is attached to the MIPS CPU INT0 pin */
236     i8259 = i8259_init(env->irq[2]);
237
238     rtc_state = rtc_init(0x70, i8259[8], 2000);
239
240     /* Register 64 KB of ISA IO space at 0x14000000 */
241     isa_mmio_init(0x14000000, 0x00010000);
242     isa_mem_base = 0x10000000;
243
244     pit = pit_init(0x40, i8259[0]);
245
246     for(i = 0; i < MAX_SERIAL_PORTS; i++) {
247         if (serial_hds[i]) {
248             serial_init(serial_io[i], i8259[serial_irq[i]], 115200,
249                         serial_hds[i]);
250         }
251     }
252
253     isa_vga_init(phys_ram_base + ram_size, ram_size,
254                  vga_ram_size);
255
256     if (nd_table[0].vlan)
257         isa_ne2000_init(0x300, i8259[9], &nd_table[0]);
258
259     if (drive_get_max_bus(IF_IDE) >= MAX_IDE_BUS) {
260         fprintf(stderr, "qemu: too many IDE bus\n");
261         exit(1);
262     }
263
264     for(i = 0; i < MAX_IDE_BUS * MAX_IDE_DEVS; i++) {
265         index = drive_get_index(IF_IDE, i / MAX_IDE_DEVS, i % MAX_IDE_DEVS);
266         if (index != -1)
267             hd[i] = drives_table[index].bdrv;
268         else
269             hd[i] = NULL;
270     }
271
272     for(i = 0; i < MAX_IDE_BUS; i++)
273         isa_ide_init(ide_iobase[i], ide_iobase2[i], i8259[ide_irq[i]],
274                      hd[MAX_IDE_DEVS * i],
275                      hd[MAX_IDE_DEVS * i + 1]);
276
277     i8042_init(i8259[1], i8259[12], 0x60);
278 }
279
280 QEMUMachine mips_machine = {
281     .name = "mips",
282     .desc = "mips r4k platform",
283     .init = mips_r4k_init,
284     .ram_require = VGA_RAM_SIZE + BIOS_SIZE,
285 };