nl80211: Sync with linux/nl80211.h from wireless-testing.git

Note: This changes values for existing NL80211_ATTR_MAX_SCAN_IE_LEN
and NL80211_ATTR_KEY_TYPE (for some reason, they ended up getting
swapped in wireless-testing.git) and as such, could break Michael
MIC  error reporting (well, at least partially).

diff --git a/src/common/nl80211_copy.h b/src/common/nl80211_copy.h
index ee11dfe..dc9d9ec 100644 (file)
--- a/src/common/nl80211_copy.h
+++ b/src/common/nl80211_copy.h
@@ -7,7 +7,7 @@
  * Copyright 2008 Michael Wu <flamingice@sourmilk.net>
  * Copyright 2008 Luis Carlos Cobo <luisca@cozybit.com>
  * Copyright 2008 Michael Buesch <mb@bu3sch.de>
- * Copyright 2008 Luis R. Rodriguez <lrodriguez@atheros.com>
+ * Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez@atheros.com>
  * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
  * Copyright 2008 Colin McCabe <colin@cozybit.com>
  *
@@ -46,8 +46,10 @@
  *     to get a list of all present wiphys.
  * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or
  *     %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME,
- *     %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, and/or
- *     %NL80211_ATTR_WIPHY_CHANNEL_TYPE.
+ *     %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ,
+ *     %NL80211_ATTR_WIPHY_CHANNEL_TYPE, %NL80211_ATTR_WIPHY_RETRY_SHORT,
+ *     %NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
+ *     and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD.
  * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request
  *     or rename notification. Has attributes %NL80211_ATTR_WIPHY and
  *     %NL80211_ATTR_WIPHY_NAME.
@@ -166,6 +168,22 @@
  *     set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is
  *     %NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on
  *     to (%NL80211_ATTR_REG_ALPHA2).
+ * @NL80211_CMD_REG_BEACON_HINT: indicates to userspace that an AP beacon
+ *     has been found while world roaming thus enabling active scan or
+ *     any mode of operation that initiates TX (beacons) on a channel
+ *     where we would not have been able to do either before. As an example
+ *     if you are world roaming (regulatory domain set to world or if your
+ *     driver is using a custom world roaming regulatory domain) and while
+ *     doing a passive scan on the 5 GHz band you find an AP there (if not
+ *     on a DFS channel) you will now be able to actively scan for that AP
+ *     or use AP mode on your card on that same channel. Note that this will
+ *     never be used for channels 1-11 on the 2 GHz band as they are always
+ *     enabled world wide. This beacon hint is only sent if your device had
+ *     either disabled active scanning or beaconing on a channel. We send to
+ *     userspace the wiphy on which we removed a restriction from
+ *     (%NL80211_ATTR_WIPHY) and the channel on which this occurred
+ *     before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER)
+ *     the beacon hint was processed.
  *
  * @NL80211_CMD_AUTHENTICATE: authentication request and notification.
  *     This command is used both as a command (request to authenticate) and
@@ -207,6 +225,15 @@
  *     %NL80211_ATTR_KEY_SEQ to indicate the TSC value of the frame; this
  *     event matches with MLME-MICHAELMICFAILURE.indication() primitive
  *
+ * @NL80211_CMD_JOIN_IBSS: Join a new IBSS -- given at least an SSID and a
+ *     FREQ attribute (for the initial frequency if no peer can be found)
+ *     and optionally a MAC (as BSSID) and FREQ_FIXED attribute if those
+ *     should be fixed rather than automatically determined. Can only be
+ *     executed on a network interface that is UP, and fixed BSSID/FREQ
+ *     may be rejected.
+ * @NL80211_CMD_LEAVE_IBSS: Leave the IBSS -- no special arguments, the IBSS is
+ *     determined by the network interface.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -270,6 +297,11 @@ enum nl80211_commands {
 
        NL80211_CMD_MICHAEL_MIC_FAILURE,
 
+       NL80211_CMD_REG_BEACON_HINT,
+
+       NL80211_CMD_JOIN_IBSS,
+       NL80211_CMD_LEAVE_IBSS,
+
        /* add new commands above here */
 
        /* used to define NL80211_CMD_MAX below */
@@ -288,6 +320,7 @@ enum nl80211_commands {
 #define NL80211_CMD_ASSOCIATE NL80211_CMD_ASSOCIATE
 #define NL80211_CMD_DEAUTHENTICATE NL80211_CMD_DEAUTHENTICATE
 #define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE
+#define NL80211_CMD_REG_BEACON_HINT NL80211_CMD_REG_BEACON_HINT
 
 /**
  * enum nl80211_attrs - nl80211 netlink attributes
@@ -306,6 +339,18 @@ enum nl80211_commands {
  *     NL80211_CHAN_HT20 = HT20 only
  *     NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel
  *     NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel
+ * @NL80211_ATTR_WIPHY_RETRY_SHORT: TX retry limit for frames whose length is
+ *     less than or equal to the RTS threshold; allowed range: 1..255;
+ *     dot11ShortRetryLimit; u8
+ * @NL80211_ATTR_WIPHY_RETRY_LONG: TX retry limit for frames whose length is
+ *     greater than the RTS threshold; allowed range: 1..255;
+ *     dot11ShortLongLimit; u8
+ * @NL80211_ATTR_WIPHY_FRAG_THRESHOLD: fragmentation threshold, i.e., maximum
+ *     length in octets for frames; allowed range: 256..8000, disable
+ *     fragmentation with (u32)-1; dot11FragmentationThreshold; u32
+ * @NL80211_ATTR_WIPHY_RTS_THRESHOLD: RTS threshold (TX frames with length
+ *     larger than or equal to this use RTS/CTS handshake); allowed range:
+ *     0..65536, disable with (u32)-1; dot11RTSThreshold; u32
  *
  * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on
  * @NL80211_ATTR_IFNAME: network interface name
@@ -423,6 +468,23 @@ enum nl80211_commands {
  * @NL80211_ATTR_KEY_TYPE: Key Type, see &enum nl80211_key_type, represented as
  *     a u32
  *
+ * @NL80211_ATTR_FREQ_BEFORE: A channel which has suffered a regulatory change
+ *     due to considerations from a beacon hint. This attribute reflects
+ *     the state of the channel _before_ the beacon hint processing. This
+ *     attributes consists of a nested attribute containing
+ *     NL80211_FREQUENCY_ATTR_*
+ * @NL80211_ATTR_FREQ_AFTER: A channel which has suffered a regulatory change
+ *     due to considerations from a beacon hint. This attribute reflects
+ *     the state of the channel _after_ the beacon hint processing. This
+ *     attributes consists of a nested attribute containing
+ *     NL80211_FREQUENCY_ATTR_*
+ *
+ * @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported
+ *     cipher suites
+ *
+ * @NL80211_ATTR_FREQ_FIXED: a flag indicating the IBSS should not try to look
+ *     for other networks on different channels
+ *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
@@ -507,9 +569,21 @@ enum nl80211_attrs {
        NL80211_ATTR_AUTH_TYPE,
        NL80211_ATTR_REASON_CODE,
 
+       NL80211_ATTR_KEY_TYPE,
+
        NL80211_ATTR_MAX_SCAN_IE_LEN,
+       NL80211_ATTR_CIPHER_SUITES,
 
-       NL80211_ATTR_KEY_TYPE,
+       NL80211_ATTR_FREQ_BEFORE,
+       NL80211_ATTR_FREQ_AFTER,
+
+       NL80211_ATTR_FREQ_FIXED,
+
+
+       NL80211_ATTR_WIPHY_RETRY_SHORT,
+       NL80211_ATTR_WIPHY_RETRY_LONG,
+       NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
+       NL80211_ATTR_WIPHY_RTS_THRESHOLD,
 
        /* add attributes here, update the policy in nl80211.c */