The complex patch with which MohammadAG had his success

diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 06269ea..81dda58 100644 (file)
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -126,6 +126,16 @@ ftrace_call:
 
 #else
 
+                               
+gnu_trace:
+       ldr r1, [sp, #20]                       @ lr of instrumented routine
+       mov r0, lr
+       sub r0, r0, #MCOUNT_INSN_SIZE
+       mov lr, pc
+       mov pc, r2
+       ldmia sp!, {r0-r3, ip, lr}
+       mov pc, ip
+                               
 ENTRY(mcount)
        stmdb sp!, {r0-r3, lr}
        ldr r0, =ftrace_trace_function
@@ -135,6 +145,16 @@ ENTRY(mcount)
        bne trace
        ldmia sp!, {r0-r3, pc}
 
+ENTRY(__gnu_mcount_nc)
+       stmdb sp!, {r0-r3, lr}
+       ldr r0, =ftrace_trace_function
+       ldr r2, [r0]
+       adr r0, ftrace_stub
+       cmp r0, r2
+       bne gnu_trace
+       ldmia sp!, {r0-r3, ip, lr}
+       mov pc, ip
+
 trace:
        ldr r1, [fp, #-4]
        mov r0, lr

diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index ce82acf..248cf76 100644 (file)
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -108,6 +108,7 @@ static void __init rx51_xceiv_init(void)
 
 static int rx51_xceiv_reset(void)
 {
+       printk(KERN_ERR "rx51_xceiv_reset\n");
        /* make sure the transceiver is awake */
        msleep(15);
        /* only reset powered transceivers */
@@ -125,6 +126,7 @@ static int rx51_xceiv_power(bool power)
 {
        unsigned long   timeout;
 
+       printk(KERN_ERR "rx51_xceiv_power %d\n",power);
        if (!power) {
                /* Let musb go stdby before powering down the transceiver */
                timeout = jiffies + msecs_to_jiffies(100);

diff --git a/debian/.config b/debian/.config
new file mode 100644 (file)
index 0000000..dc20408
--- /dev/null
+++ b/debian/.config
@@ -0,0 +1,2164 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.28maemo-omap1
+# Mon May 31 00:51:58 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_OPROFILE_OMAP_GPTIMER=y
+CONFIG_OPROFILE_ARMV7=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=m
+# CONFIG_IKCONFIG_PROC is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+# CONFIG_CGROUP_NS is not set
+CONFIG_CGROUP_FREEZER=y
+# CONFIG_CGROUP_DEVICE is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+# CONFIG_USER_SCHED is not set
+CONFIG_CGROUP_SCHED=y
+# CONFIG_CGROUP_CPUACCT is not set
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_MM_OWNER=y
+CONFIG_CGROUP_MEM_RES_CTLR=y
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_MSM is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+CONFIG_OMAP_SMARTREFLEX=y
+# CONFIG_OMAP_SMARTREFLEX_TESTING is not set
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_BOOT_TAG=y
+CONFIG_OMAP_BOOT_REASON=y
+CONFIG_OMAP_COMPONENT_VERSION=y
+CONFIG_OMAP_GPIO_SWITCH=y
+CONFIG_OMAP_MUX=y
+CONFIG_OMAP_MUX_DEBUG=y
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_IOMMU=m
+# CONFIG_OMAP_IOMMU_DEBUG is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+# CONFIG_OMAP3_DEBOBS is not set
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_TICK_GPTIMER=1
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_PM_NONE is not set
+# CONFIG_OMAP_PM_NOOP is not set
+CONFIG_OMAP_PM_SRF=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+CONFIG_MACH_NOKIA_RX51=y
+CONFIG_VIDEO_MACH_RX51=m
+# CONFIG_VIDEO_MACH_RX51_OLD_I2C is not set
+# CONFIG_MACH_NOKIA_RX71 is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_OMAP3EVM is not set
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_RX51_CAMERA_BUTTON is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+CONFIG_ARM_THUMBEE=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=128
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0 snd-soc-rx51.hp_lim=42 snd-soc-tlv320aic3x.hp_dac_lim=6"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+# CONFIG_IPV6_ROUTE_INFO is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+CONFIG_NF_CONNTRACK=m
+# CONFIG_NF_CT_ACCT is not set
+# CONFIG_NF_CONNTRACK_MARK is not set
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+CONFIG_NF_CT_PROTO_GRE=m
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CT_PROTO_UDPLITE is not set
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+# CONFIG_NF_CONNTRACK_SANE is not set
+CONFIG_NF_CONNTRACK_SIP=m
+# CONFIG_NF_CONNTRACK_TFTP is not set
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+# CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_IPTABLES=m
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+CONFIG_IP_NF_FILTER=m
+# CONFIG_IP_NF_TARGET_REJECT is not set
+CONFIG_IP_NF_TARGET_LOG=m
+# CONFIG_IP_NF_TARGET_ULOG is not set
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+CONFIG_IP_NF_TARGET_REDIRECT=m
+# CONFIG_IP_NF_TARGET_IDLETIMER is not set
+# CONFIG_NF_NAT_SNMP_BASIC is not set
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+# CONFIG_NF_NAT_TFTP is not set
+# CONFIG_NF_NAT_AMANDA is not set
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+# CONFIG_IP_NF_MANGLE is not set
+# CONFIG_IP_NF_RAW is not set
+# CONFIG_IP_NF_SECURITY is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+CONFIG_IP_NF_HB=m
+# CONFIG_IP_NF_HB_DEBUG is not set
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+# CONFIG_IP6_NF_QUEUE is not set
+CONFIG_IP6_NF_IPTABLES=m
+# CONFIG_IP6_NF_MATCH_AH is not set
+# CONFIG_IP6_NF_MATCH_EUI64 is not set
+# CONFIG_IP6_NF_MATCH_FRAG is not set
+# CONFIG_IP6_NF_MATCH_OPTS is not set
+# CONFIG_IP6_NF_MATCH_HL is not set
+# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
+# CONFIG_IP6_NF_MATCH_MH is not set
+# CONFIG_IP6_NF_MATCH_RT is not set
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
+# CONFIG_IP6_NF_TARGET_REJECT is not set
+# CONFIG_IP6_NF_MANGLE is not set
+# CONFIG_IP6_NF_RAW is not set
+# CONFIG_IP6_NF_SECURITY is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+CONFIG_PHONET=m
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIUSB is not set
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIBRF6150 is not set
+CONFIG_BT_HCIH4P=m
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=y
+CONFIG_NL80211=y
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_MAC80211=m
+
+#
+# Rate control algorithm selection
+#
+# CONFIG_MAC80211_RC_PID is not set
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
+CONFIG_MAC80211_MESH=y
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH=""
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+CONFIG_MTD_OOPS=y
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+CONFIG_MTD_ONENAND=y
+# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
+# CONFIG_MTD_ONENAND_GENERIC is not set
+CONFIG_MTD_ONENAND_OMAP2=y
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_NOKIA_AV_DETECT=m
+# CONFIG_ICS932S401 is not set
+CONFIG_OMAP_STI=y
+CONFIG_OMAP_STI_CONSOLE=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+CONFIG_OMAP_SSI=m
+CONFIG_SSI_MCSAAB_IMP=m
+CONFIG_SSI_CMT_SPEECH=m
+# CONFIG_SSI_CMT_SPEECH_DEBUG is not set
+CONFIG_SSI_CHAR=m
+# CONFIG_SSI_CHAR_DEBUG is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+CONFIG_MD=y
+# CONFIG_BLK_DEV_MD is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_LOOP=m
+# CONFIG_DM_SNAPSHOT is not set
+# CONFIG_DM_MIRROR is not set
+# CONFIG_DM_ZERO is not set
+# CONFIG_DM_MULTIPATH is not set
+# CONFIG_DM_DELAY is not set
+# CONFIG_DM_UEVENT is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_LIBERTAS is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_RT2X00 is not set
+CONFIG_WL12XX=y
+CONFIG_WL1251=m
+# CONFIG_WL1271 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=800
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_TWL4030=y
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+CONFIG_TOUCHSCREEN_TSC2005=m
+# CONFIG_TOUCHSCREEN_TSC210X is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+CONFIG_INPUT_LIRC=y
+CONFIG_LIRC_DEV=m
+CONFIG_LIRC_RX51=m
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_OMAP3_ROM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+CONFIG_TPA6130A2=y
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_MADC=y
+CONFIG_TWL4030_PWRBUTTON=y
+CONFIG_TWL4030_POWEROFF=y
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+CONFIG_SENSORS_TSL2563=m
+# CONFIG_LP5521 is not set
+CONFIG_LIS302DL=m
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_TSC210X is not set
+# CONFIG_SPI_TSC2301 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_TSC210X is not set
+CONFIG_SENSORS_OMAP34XX=y
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=m
+CONFIG_TWL4030_WATCHDOG=m
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+CONFIG_TWL4030_CORE=y
+CONFIG_TWL4030_POWER=y
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+CONFIG_MEDIA_TUNER_CUSTOMIZE=y
+# CONFIG_MEDIA_TUNER_SIMPLE is not set
+# CONFIG_MEDIA_TUNER_TDA8290 is not set
+# CONFIG_MEDIA_TUNER_TDA827X is not set
+# CONFIG_MEDIA_TUNER_TDA18271 is not set
+# CONFIG_MEDIA_TUNER_TDA9887 is not set
+# CONFIG_MEDIA_TUNER_TEA5761 is not set
+# CONFIG_MEDIA_TUNER_TEA5767 is not set
+# CONFIG_MEDIA_TUNER_MT20XX is not set
+# CONFIG_MEDIA_TUNER_MT2060 is not set
+# CONFIG_MEDIA_TUNER_MT2266 is not set
+# CONFIG_MEDIA_TUNER_MT2131 is not set
+# CONFIG_MEDIA_TUNER_QT1010 is not set
+# CONFIG_MEDIA_TUNER_XC2028 is not set
+# CONFIG_MEDIA_TUNER_XC5000 is not set
+# CONFIG_MEDIA_TUNER_MXL5005S is not set
+# CONFIG_MEDIA_TUNER_MXL5007T is not set
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_DMA_SG=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TDA9875 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_CS5345 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+
+#
+# Video decoders
+#
+# CONFIG_VIDEO_BT819 is not set
+# CONFIG_VIDEO_BT856 is not set
+# CONFIG_VIDEO_BT866 is not set
+# CONFIG_VIDEO_KS0127 is not set
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_TCM825X is not set
+CONFIG_VIDEO_ET8EK8=m
+CONFIG_VIDEO_AD5820=m
+CONFIG_VIDEO_ADP1653=m
+# CONFIG_VIDEO_SAA7110 is not set
+# CONFIG_VIDEO_SAA7111 is not set
+# CONFIG_VIDEO_SAA7114 is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_SAA7191 is not set
+# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_VPX3220 is not set
+CONFIG_VIDEO_SMIA_SENSOR=m
+
+#
+# Video and audio decoders
+#
+# CONFIG_VIDEO_CX25840 is not set
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_SAA7185 is not set
+# CONFIG_VIDEO_ADV7170 is not set
+# CONFIG_VIDEO_ADV7175 is not set
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+CONFIG_VIDEO_OMAP3=m
+CONFIG_VIDEO_SMIAREGS=m
+# CONFIG_SOC_CAMERA is not set
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+# CONFIG_USB_M5602 is not set
+# CONFIG_USB_GSPCA_CONEX is not set
+# CONFIG_USB_GSPCA_ETOMS is not set
+# CONFIG_USB_GSPCA_FINEPIX is not set
+# CONFIG_USB_GSPCA_MARS is not set
+# CONFIG_USB_GSPCA_OV519 is not set
+# CONFIG_USB_GSPCA_PAC207 is not set
+# CONFIG_USB_GSPCA_PAC7311 is not set
+# CONFIG_USB_GSPCA_SONIXB is not set
+# CONFIG_USB_GSPCA_SONIXJ is not set
+# CONFIG_USB_GSPCA_SPCA500 is not set
+# CONFIG_USB_GSPCA_SPCA501 is not set
+# CONFIG_USB_GSPCA_SPCA505 is not set
+# CONFIG_USB_GSPCA_SPCA506 is not set
+# CONFIG_USB_GSPCA_SPCA508 is not set
+# CONFIG_USB_GSPCA_SPCA561 is not set
+# CONFIG_USB_GSPCA_STK014 is not set
+# CONFIG_USB_GSPCA_SUNPLUS is not set
+# CONFIG_USB_GSPCA_T613 is not set
+# CONFIG_USB_GSPCA_TV8532 is not set
+# CONFIG_USB_GSPCA_VC032X is not set
+# CONFIG_USB_GSPCA_ZC3XX is not set
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_USBVISION is not set
+# CONFIG_USB_VICAM is not set
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_QUICKCAM_MESSENGER is not set
+# CONFIG_USB_ET61X251 is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+# CONFIG_USB_OV511 is not set
+# CONFIG_USB_SE401 is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_STV680 is not set
+# CONFIG_USB_ZC0301 is not set
+# CONFIG_USB_PWC is not set
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+CONFIG_RADIO_ADAPTERS=y
+CONFIG_I2C_SI4713=m
+# CONFIG_USB_DSBR is not set
+# CONFIG_USB_SI470X is not set
+CONFIG_I2C_BCM2048=m
+# CONFIG_USB_MR800 is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+CONFIG_PVR=m
+CONFIG_PVR_RELEASE=y
+# CONFIG_PVR_DEBUG is not set
+# CONFIG_PVR_TIMING is not set
+# CONFIG_PVR_EXAMPLES is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+CONFIG_FB_OMAP_BOOTLOADER_INIT=y
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=14
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_DSS_VRAM_SIZE=0
+# CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set
+# CONFIG_OMAP2_DSS_RFBI is not set
+CONFIG_OMAP2_DSS_VENC=y
+CONFIG_OMAP2_DSS_SDI=y
+# CONFIG_OMAP2_DSS_DSI is not set
+# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
+
+#
+# OMAP2/3 Display Device Drivers
+#
+# CONFIG_PANEL_NEVADA is not set
+CONFIG_PANEL_ACX565AKM=y
+# CONFIG_PANEL_GENERIC is not set
+# CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C is not set
+# CONFIG_PANEL_SHARP_LS037V7DW01 is not set
+CONFIG_FB_OMAP2=y
+# CONFIG_FB_OMAP2_DEBUG_SUPPORT is not set
+# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
+CONFIG_FB_OMAP2_NUM_FBS=3
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SPI=y
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_OMAP_SOC_MCBSP=y
+CONFIG_SND_OMAP_SOC_RX51=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_TLV320AIC3X=y
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_COMPAT is not set
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_BRIGHT is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DELL is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_DYNAMIC_MINORS=y
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+CONFIG_USB_OTG_WHITELIST=y
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=m
+CONFIG_OMAP_EHCI_PHY_MODE=y
+# CONFIG_OMAP_EHCI_TLL_MODE is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+CONFIG_USB_MUSB_DEBUG=y
+CONFIG_MUSB_PROC_FS=y
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+CONFIG_USB_LIBUSUAL=y
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=m
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ZERO_HNPTEST=y
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_FILE_STORAGE_TEST=y
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+CONFIG_USB_G_NOKIA=m
+CONFIG_USB_G_SOFTUPD=m
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+CONFIG_TWL4030_USB=y
+# CONFIG_USB_IP_COMMON is not set
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_OMAP_HS=m
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_OMAP is not set
+# CONFIG_LEDS_OMAP_PWM is not set
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_PCA955X is not set
+CONFIG_LEDS_TWL4030_VIBRA=m
+CONFIG_LEDS_LP5523=m
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+CONFIG_RTC_DRV_TWL4030=m
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_UIO is not set
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+CONFIG_MPU_BRIDGE=m
+CONFIG_BRIDGE_DVFS=y
+CONFIG_BRIDGE_MEMPOOL_SIZE=0x412800
+# CONFIG_BRIDGE_DEBUG is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+CONFIG_NILFS2_FS=m
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Layered filesystems
+#
+CONFIG_UNION_FS=m
+# CONFIG_UNION_FS_XATTR is not set
+# CONFIG_UNION_FS_DEBUG is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=m
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=m
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_LOCK_ALLOC=y
+# CONFIG_PROVE_LOCKING is not set
+CONFIG_LOCKDEP=y
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_LOCKDEP is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+CONFIG_PANIC_INFO_BUFF=m
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+CONFIG_DYNAMIC_PRINTK_DEBUG=y
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_SECURITY_ROOTPLUG is not set
+CONFIG_SECURITY_LOWMEM=y
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=m
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y

diff --git a/debian/changelog b/debian/changelog
index 821a33c..6ed31fc 100644 (file)
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,3 +1,9 @@
+kernel (2.6.28-20102201+0m5-hostmode1) unstable; urgency=low
+
+  * Applied sarahn's patches and joerg's patches to get rid of power limits
+
+ -- Mohammad Abu-Garbeyyeh <mohammad7410@gmail.com>  Fri, 04 Jun 2010 17:22:20 +0300
+
 kernel (2.6.28-20101501+0m5) unstable; urgency=low
 
   * This entry has been added by BIFH queue processor

diff --git a/debian/control b/debian/control
index 1c55ac2..715ed66 100644 (file)
--- a/debian/control
+++ b/debian/control
@@ -1,24 +1,24 @@
 Source: kernel
 Section: utils
 Priority: optional
-Maintainer:  Yauheni Kaliuta <yauheni.kaliuta@nokia.com>
+Maintainer:  Mohammad Abu-Garbeyyeh <mohammad7410@gmail.com>
 Build-Depends: debhelper (>= 4.0.0), fiasco-gen
 Build-Depends-Indep: bzip2
 Standards-Version: 3.8.0
 
-Package: kernel
+Package: kernel-hostmode
 Architecture: armel
 Description: Flashable Linux kernel
  This package provides a flashable kernel image
 
-Package: kernel-flasher
+Package: kernel-hostmode-flasher
 Architecture: armel
-Pre-Depends: kernel (= ${binary:Version}), softupd (>= 0.4.0)
+Pre-Depends: kernel-hostmode (= ${binary:Version}), softupd (>= 0.4.0)
 Description: Linux kernel updater
  This package will flash the kernel image upon installation
  and eat kernel's files from /boot.
 
-Package: kernel-headers
+Package: kernel-hostmode-headers
 Architecture: armel
 Depends: ${shlibs:Depends}
 Description: Linux kernel headers
@@ -31,31 +31,31 @@ Description: Linux Kernel Headers for development
  This package provides headers from the Linux kernel. These headers
  are used by the installed headers for GNU glibc and other system libraries.
 
-Package: kernel-modules
+Package: kernel-hostmode-modules
 Architecture: armel
 Depends: module-init-tools (>= 3.3)
 Description: Linux kernel modules
  This package provides kernel modules
 
-Package: kernel-modules-debug
+Package: kernel-hostmode-modules-debug
 Architecture: armel
 Depends: module-init-tools (>= 3.3)
 Description: Linux kernel modules for debugging
  This package provides kernel modules needed for debugging and profiling
 
-Package: kernel-modules-extra
+Package: kernel-hostmode-modules-extra
 Architecture: armel
 Depends: module-init-tools (>= 3.3)
 Description: Linux kernel modules
  This package provides some extra kernel modules
 
-Package: kernel-debug
+Package: kernel-hostmode-debug
 Architecture: armel
 Description: Linux kernel debug symblos
  This packages provides vmlinux file for the kernel and
  kernel modules related to debugging.
 
-Package: kernel-source
+Package: kernel-hostmode-source
 Architecture: all
 Section: devel
 Priority: optional

diff --git a/debian/kernel-hostmode-flasher.postinst b/debian/kernel-hostmode-flasher.postinst
new file mode 100644 (file)
index 0000000..33b869e
--- /dev/null
+++ b/debian/kernel-hostmode-flasher.postinst
@@ -0,0 +1,21 @@
+#!/bin/sh
+
+set -e
+
+KERNEL=/boot/zImage-2.6.28-20102201+0m5-hostmode1.fiasco
+
+FLASHER=/sbin/fiasco-image-update
+
+# they say this is The Right Way (tm) to check for
+# scratchbox environment
+if [ -L /targets/links/scratchbox.config ]; then
+       # hehe
+       true
+else
+       if [ -f $KERNEL -a -x $FLASHER ]; then
+               $FLASHER $KERNEL
+       fi
+fi
+
+#DEBHELPER#
+

diff --git a/debian/kernel-hostmode-flasher.postinst.in b/debian/kernel-hostmode-flasher.postinst.in
new file mode 100644 (file)
index 0000000..e347079
--- /dev/null
+++ b/debian/kernel-hostmode-flasher.postinst.in
@@ -0,0 +1,21 @@
+#!/bin/sh
+
+set -e
+
+KERNEL=/boot/zImage-@VERSION@.fiasco
+
+FLASHER=/sbin/fiasco-image-update
+
+# they say this is The Right Way (tm) to check for
+# scratchbox environment
+if [ -L /targets/links/scratchbox.config ]; then
+       # hehe
+       true
+else
+       if [ -f $KERNEL -a -x $FLASHER ]; then
+               $FLASHER $KERNEL
+       fi
+fi
+
+#DEBHELPER#
+

diff --git a/debian/kernel-hostmode-modules.postinst b/debian/kernel-hostmode-modules.postinst
new file mode 100644 (file)
index 0000000..9c48027
--- /dev/null
+++ b/debian/kernel-hostmode-modules.postinst
@@ -0,0 +1,12 @@
+#!/bin/sh
+
+set -e
+
+cd /lib/modules
+
+ls -1d * | grep -v current | while read i; do
+   /sbin/depmod $i || :
+done
+
+#DEBHELPER#
+

diff --git a/debian/kernel-hostmode-modules.postinst.save b/debian/kernel-hostmode-modules.postinst.save
new file mode 100644 (file)
index 0000000..c724ee2
--- /dev/null
+++ b/debian/kernel-hostmode-modules.postinst.save
@@ -0,0 +1,14 @@
+#!/bin/sh
+
+set -e
+
+cd /lib/modules
+
+ls -1d * | grep -v current | while read i; do
+   /sbin/depmod $i || :
+done
+
+ln -s /lib/modules/2.6.28-hostmode1 /lib/modules/current
+
+#DEBHELPER#
+

diff --git a/debian/kernel-hostmode-modules.postrm b/debian/kernel-hostmode-modules.postrm
new file mode 100644 (file)
index 0000000..9c48027
--- /dev/null
+++ b/debian/kernel-hostmode-modules.postrm
@@ -0,0 +1,12 @@
+#!/bin/sh
+
+set -e
+
+cd /lib/modules
+
+ls -1d * | grep -v current | while read i; do
+   /sbin/depmod $i || :
+done
+
+#DEBHELPER#
+

diff --git a/debian/rules b/debian/rules
index e1577d7..0581aa5 100644 (file)
--- a/debian/rules
+++ b/debian/rules
@@ -5,11 +5,11 @@ WEEK := $(shell date +%Y%W)
 RELEASE := $(shell dpkg-parsechangelog | awk '/^Version: / { print $$2 }')
 #REVISION := $(shell echo "$(RELEASE)" | sed 's/\(.*\)-\(.*\)/\2/')
 #no need to update modules so often, api is quite stable between weekly releases
-REVISION := maemo2
-#EXTRAVERSION := EXTRAVERSION-$(REVISION)
+REVISION := hostmode1
+EXTRAVERSION := EXTRAVERSION=-$(REVISION)
 
-PACKAGE := kernel
-FLASHER_PACKAGE := kernel-flasher
+PACKAGE := kernel-hostmode
+FLASHER_PACKAGE := kernel-hostmode-flasher
 SOURCE_PACKAGE := $(PACKAGE)-source
 KERNEL_PACKAGE := $(PACKAGE)
 MODULES_PACKAGE := $(PACKAGE)-modules
@@ -56,6 +56,8 @@ source-stamp: source-copy-stamp
 
 configure-stamp: source-stamp
        cd $(KSRC) && $(MAKE) $(EXTRAVERSION) $(DEFCONFIG)
+       cp $(CURDIR)/debian/.config $(CURDIR)/debian/build/$(PACKAGE)/.config
+       cp $(CURDIR)/debian/.config $(CURDIR)/
        touch $@
 
 kernel-stamp: configure-stamp
@@ -137,7 +139,7 @@ install-modules:
        for f in $$(find $(KSRC) -name "*.ko"); do \
                install -c -m 644 $$f $(CURDIR)/debian/$(MODULES_PACKAGE)/lib/modules/$(KVER)/$$(basename $$f); \
        done
-       ln -sf $(KVER) $(CURDIR)/debian/$(MODULES_PACKAGE)/lib/modules/current
+       #ln -sf $(KVER) $(CURDIR)/debian/$(MODULES_PACKAGE)/lib/modules/current
 
 install-headers:
        dh_testdir

diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c
index 7e912f2..b51e5ea 100644 (file)
--- a/drivers/usb/core/generic.c
+++ b/drivers/usb/core/generic.c
@@ -97,10 +97,10 @@ int usb_choose_configuration(struct usb_device *udev)
                 */
 
                /* Rule out configs that draw too much bus current */
-               if (c->desc.bMaxPower * 2 > udev->bus_mA) {
+               /*if (c->desc.bMaxPower * 2 > udev->bus_mA) {
                        insufficient_power++;
                        continue;
-               }
+               }*/
 
                /* When the first config's first interface is one of Microsoft's
                 * pet nonstandard Ethernet-over-USB protocols, ignore it unless
@@ -132,10 +132,10 @@ int usb_choose_configuration(struct usb_device *udev)
                        best = c;
        }
 
-       if (insufficient_power > 0)
+       /*if (insufficient_power > 0)
                dev_info(&udev->dev, "rejected %d configuration%s "
                        "due to insufficient available bus power\n",
-                       insufficient_power, plural(insufficient_power));
+                       insufficient_power, plural(insufficient_power));*/
 
        if (best) {
                i = best->desc.bConfigurationValue;

diff --git a/drivers/usb/musb/isp1704.h b/drivers/usb/musb/isp1704.h
index c52406e..7a2220a 100644 (file)
--- a/drivers/usb/musb/isp1704.h
+++ b/drivers/usb/musb/isp1704.h
@@ -41,6 +41,7 @@
 #define ISP1704_OTG_CTRL               0x0a
 #define ISP1704_USB_INTRISE            0x0d
 #define ISP1704_USB_INTFALL            0x10
+#define ISP1704_USB_INTSTAT   0x13
 #define ISP1704_DEBUG                  0x15
 #define ISP1704_SCRATCH                        0x16
 #define ISP1704_PWR_CTRL               0x3d

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 6adab83..8f79d96 100644 (file)
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -123,9 +123,9 @@ static int __initdata use_dma;
 module_param(use_dma, bool, 0);
 MODULE_PARM_DESC(use_dma, "enable/disable use of DMA");
 
-unsigned musb_debug = 0;
+unsigned musb_debug = 10;
 module_param_named(debug, musb_debug, uint, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "Debug message level. Default = 0");
+MODULE_PARM_DESC(debug, "Debug message level. Default = 10");
 
 #define DRIVER_AUTHOR "Mentor Graphics, Texas Instruments, Nokia"
 #define DRIVER_DESC "Inventra Dual-Role USB Controller Driver"
@@ -142,6 +142,59 @@ MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:" MUSB_DRIVER_NAME);
 
+
+
+inline void mbusywait(int ms)
+{
+       unsigned long end_time = jiffies + msecs_to_jiffies(ms);
+       while(time_before(jiffies,end_time))
+               cpu_relax();
+
+}
+
+void musb_force_term(void __iomem *addr, enum musb_term term)
+{
+       u8 r;
+
+
+       r = musb_ulpi_readb(addr, ISP1704_OTG_CTRL);
+       r |= ISP1704_OTG_CTRL_DP_PULLDOWN | ISP1704_OTG_CTRL_DM_PULLDOWN;
+       musb_ulpi_writeb(addr, ISP1704_OTG_CTRL, r);
+
+       r = musb_ulpi_readb(addr, ISP1704_FUNC_CTRL);
+
+       switch(term) {
+
+       case MUSB_TERM_HOST_HIGHSPEED:
+               r &= ~ISP1704_FUNC_CTRL_XCVRSELECT;
+               r &= ~ISP1704_FUNC_CTRL_TERMSELECT;
+               r &= ~ISP1704_FUNC_CTRL_OPMODE;
+               break;
+
+       case MUSB_TERM_HOST_FULLSPEED:
+               r |= 1 << ISP1704_FUNC_CTRL_XCVRSELECT_SHIFT;
+               r |= ISP1704_FUNC_CTRL_TERMSELECT;
+               r &= ~ISP1704_FUNC_CTRL_OPMODE;
+               break;
+
+       case MUSB_TERM_HOST_LOWSPEED:
+               r |= 2 << ISP1704_FUNC_CTRL_XCVRSELECT_SHIFT;
+               r |= ISP1704_FUNC_CTRL_TERMSELECT;
+               r &= ~ISP1704_FUNC_CTRL_OPMODE;
+               break;
+
+       default:
+               ERR("Unknown musb termination\n");
+               return;
+       }
+
+       r |= ISP1704_OTG_CTRL_IDPULLUP;
+       musb_ulpi_writeb(addr, ISP1704_FUNC_CTRL, r);
+
+}
+
+
+
 static inline int musb_verify_charger(void __iomem *addr)
 {
        u8 r, ret = 0;
@@ -220,6 +273,8 @@ static int musb_charger_detect(struct musb *musb)
 
        u8              vdat = 0;
        u8              r;
+       u8 testmode;
+       testmode = musb_readb(musb->mregs,MUSB_TESTMODE);
 
        msleep(5);
 
@@ -297,7 +352,7 @@ static int musb_charger_detect(struct musb *musb)
                        break;
        }
 
-       if (vdat) {
+       if (vdat && !(testmode & MUSB_TEST_FORCE_HOST)) {
                /* REVISIT: This code works only with dedicated chargers!
                 * When support for HOST/HUB chargers is added, don't
                 * forget this.
@@ -349,7 +404,7 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src)
 
        prefetch((u8 *)src);
 
-       DBG(4, "%cX ep%d fifo %p count %d buf %p\n",
+       DBG(6, "%cX ep%d fifo %p count %d buf %p\n",
                        'T', hw_ep->epnum, fifo, len, src);
 
        /* we can't assume unaligned reads work */
@@ -387,7 +442,7 @@ void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
 {
        void __iomem *fifo = hw_ep->fifo;
 
-       DBG(4, "%cX ep%d fifo %p count %d buf %p\n",
+       DBG(6, "%cX ep%d fifo %p count %d buf %p\n",
                        'R', hw_ep->epnum, fifo, len, dst);
 
        /* we can't assume unaligned writes work */
@@ -490,7 +545,6 @@ void musb_otg_timer_func(unsigned long data)
 {
        struct musb     *musb = (struct musb *)data;
        unsigned long   flags;
-
        spin_lock_irqsave(&musb->lock, flags);
        switch (musb->xceiv->state) {
        case OTG_STATE_B_WAIT_ACON:
@@ -572,10 +626,19 @@ void musb_hnp_stop(struct musb *musb)
 static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
                                u8 devctl, u8 power)
 {
+       u8 testmode;
        irqreturn_t handled = IRQ_NONE;
        void __iomem *mbase = musb->mregs;
        u8 r;
 
+       testmode = musb_readb(mbase,MUSB_TESTMODE);
+  if(testmode & MUSB_TEST_FORCE_HOST) {
+               if(int_usb & MUSB_INTR_SESSREQ) {
+                       DBG(1,"Piggybacking CONNECT on SESS REQ\n");
+                       musb->int_usb |= MUSB_INTR_CONNECT;
+               } 
+       }
+
        DBG(3, "<== Power=%02x, DevCtl=%02x, int_usb=0x%x\n", power, devctl,
                int_usb);
 
@@ -630,6 +693,8 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
                } else {
                        switch (musb->xceiv->state) {
 #ifdef CONFIG_USB_MUSB_HDRC_HCD
+                       case OTG_STATE_A_WAIT_BCON:
+                       case OTG_STATE_A_HOST:
                        case OTG_STATE_A_SUSPEND:
                                /* possibly DISCONNECT is upcoming */
                                musb->xceiv->state = OTG_STATE_A_HOST;
@@ -678,7 +743,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
                 * be discarded silently.
                 */
                if ((devctl & MUSB_DEVCTL_VBUS)
-                   && !(devctl & MUSB_DEVCTL_BDEVICE)) {
+                   && host_mode(musb->mregs)) {
                        musb_writeb(mbase, MUSB_DEVCTL, MUSB_DEVCTL_SESSION);
                        musb->ep0_stage = MUSB_EP0_START;
                        musb->xceiv->state = OTG_STATE_A_IDLE;
@@ -796,9 +861,15 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
                                        + msecs_to_jiffies(musb->a_wait_bcon));
                        break;
                case OTG_STATE_A_HOST:
+                       if(testmode & MUSB_TEST_FORCE_HOST) {
+                               //                              musb->int_usb |= MUSB_INTR_RESUME;
+                               break;
+                       }
+
                        musb->xceiv->state = OTG_STATE_A_SUSPEND;
                        musb->is_active = is_otg_enabled(musb)
                                        && musb->xceiv->host->b_hnp_enable;
+
                        break;
                case OTG_STATE_B_HOST:
                        /* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */
@@ -818,6 +889,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
                musb->is_active = 1;
                set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
 
+
                musb->ep0_stage = MUSB_EP0_START;
 
 #ifdef CONFIG_USB_MUSB_OTG
@@ -836,9 +908,65 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
                musb->port1_status |= USB_PORT_STAT_CONNECTION
                                        |(USB_PORT_STAT_C_CONNECTION << 16);
 
-               /* high vs full speed is just a guess until after reset */
-               if (devctl & MUSB_DEVCTL_LSDEV)
-                       musb->port1_status |= USB_PORT_STAT_LOW_SPEED;
+               if (testmode & MUSB_TEST_FORCE_HOST) {
+                       u8 r,reg;
+      void __iomem *mbase = musb->mregs;
+
+                       musb_force_term(musb->mregs,MUSB_TERM_HOST_HIGHSPEED);
+
+                       r = musb_ulpi_readb(mbase, ISP1704_DEBUG);
+                       DBG(1,"Linestate %x\n",r);
+                       switch(r) {
+                       case 2:
+                               musb->port1_status |= USB_PORT_STAT_LOW_SPEED;
+                               reg = musb_readb(mbase, MUSB_TESTMODE);
+                               reg &= ~MUSB_TEST_FORCE_FS;
+                               reg &= ~MUSB_TEST_FORCE_HS;
+                               musb_writeb(mbase, MUSB_TESTMODE, reg);
+
+                               reg = musb_readb(mbase, MUSB_POWER);
+                               reg &= ~MUSB_POWER_HSENAB;
+                               musb_writeb(mbase, MUSB_POWER, reg);
+
+                               musb_force_term(musb->mregs,MUSB_TERM_HOST_LOWSPEED);
+                               break;
+                       case 1:
+                               /*High or full speed*/
+                               reg = musb_readb(mbase, MUSB_TESTMODE);
+                               if(reg &  MUSB_TEST_FORCE_HS) {
+                                       /*High speed*/
+                                       reg &= ~MUSB_TEST_FORCE_FS;
+                                       musb_writeb(mbase, MUSB_TESTMODE, reg);
+
+                                       reg = musb_readb(mbase, MUSB_POWER);
+                                       reg |= MUSB_POWER_HSENAB;
+                                       musb_writeb(mbase, MUSB_POWER, reg);
+                               } else {
+                                       /*Full speed*/
+                                       reg |= MUSB_TEST_FORCE_FS;
+                                       musb_writeb(mbase, MUSB_TESTMODE, reg);
+
+                                       reg = musb_readb(mbase, MUSB_POWER);
+                                       reg &= ~MUSB_POWER_HSENAB;
+                                       musb_writeb(mbase, MUSB_POWER, reg);
+                               }
+
+                               musb_force_term(mbase,MUSB_TERM_HOST_FULLSPEED);
+
+                               break;
+                       case 0:
+                       case 3:
+                               /*invalid*/
+                               WARNING("Invalid line state of %d\n",r);
+                               break;
+                               
+                       }
+               } else {
+
+                       /* high vs full speed is just a guess until after reset */
+                       if (devctl & MUSB_DEVCTL_LSDEV)
+                               musb->port1_status |= USB_PORT_STAT_LOW_SPEED;
+               }
 
                if (hcd->status_urb)
                        usb_hcd_poll_rh_status(hcd);
@@ -974,6 +1102,8 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
                                musb->ignore_disconnect = 1;
                                musb_g_reset(musb);
                                /* FALLTHROUGH */
+                       case OTG_STATE_A_HOST:
+                               musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
                        case OTG_STATE_A_WAIT_BCON:     /* OPT TD.4.7-900ms */
                                DBG(1, "HNP: Setting timer as %s\n",
                                                otg_state_string(musb));
@@ -2421,8 +2551,7 @@ bad_config:
                DBG(1, "%s mode, status %d, devctl %02x %c\n",
                        "HOST", status,
                        musb_readb(musb->mregs, MUSB_DEVCTL),
-                       (musb_readb(musb->mregs, MUSB_DEVCTL)
-                                       & MUSB_DEVCTL_BDEVICE
+                               (!host_mode(musb->mregs)
                                ? 'B' : 'A'));
 
        } else /* peripheral is enabled */ {

diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index dd9de46..36a7dc4 100644 (file)
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -85,6 +85,16 @@ struct musb_ep;
 #define        is_host_active(musb)            is_host_capable()
 #endif
 
+static inline int host_mode(void __iomem *addr) 
+{
+       u8              devctl,testmode;
+       devctl = musb_readb(addr, MUSB_DEVCTL);
+       testmode = musb_readb(addr,MUSB_TESTMODE);
+
+       return (testmode & MUSB_TEST_FORCE_HOST) || !(devctl & MUSB_DEVCTL_BDEVICE);
+}
+
+
 #if defined(CONFIG_USB_MUSB_OTG) || defined(CONFIG_USB_MUSB_PERIPHERAL)
 /* for some reason, the "select USB_GADGET_MUSB_HDRC" doesn't always
  * override that choice selection (often USB_GADGET_DUMMY_HCD).
@@ -593,6 +603,14 @@ extern void musb_hnp_stop(struct musb *musb);
 
 extern int musb_platform_set_mode(struct musb *musb, u8 musb_mode);
 
+enum musb_term {
+       MUSB_TERM_HOST_HIGHSPEED,
+       MUSB_TERM_HOST_FULLSPEED,
+       MUSB_TERM_HOST_LOWSPEED,
+};
+
+extern void musb_force_term(void __iomem *addr, enum musb_term term);
+
 #if defined(CONFIG_USB_TUSB6010) || defined(CONFIG_BLACKFIN) || \
        defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX)
 extern void musb_platform_try_idle(struct musb *musb, unsigned long timeout);

diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 70d6f91..01bd839 100644 (file)
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1957,7 +1957,7 @@ __acquires(musb->lock)
        u8              power;
 
        DBG(3, "<== %s addr=%x driver '%s'\n",
-                       (devctl & MUSB_DEVCTL_BDEVICE)
+                       !host_mode(musb->mregs)
                                ? "B-Device" : "A-Device",
                        musb_readb(mbase, MUSB_FADDR),
                        musb->gadget_driver
@@ -1994,7 +1994,7 @@ __acquires(musb->lock)
        /* Normal reset, as B-Device;
         * or else after HNP, as A-Device
         */
-       if (devctl & MUSB_DEVCTL_BDEVICE) {
+       if (!host_mode(musb->mregs)) {
                musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
                musb->g.is_a_peripheral = 0;
        } else if (is_otg_enabled(musb)) {

diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 7958251..eb21b7a 100644 (file)
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -1863,8 +1863,10 @@ static int musb_urb_enqueue(
        unsigned                        interval;
 
        /* host role must be active */
-       if (!is_host_active(musb) || !musb->is_active)
+       if (!is_host_active(musb) || !musb->is_active) {
+               printk(KERN_ERR "musb is_host_active %d is_active %d\n",is_host_active(musb),musb->is_active);
                return -ENODEV;
+       }
 
        spin_lock_irqsave(&musb->lock, flags);
        ret = usb_hcd_link_urb_to_ep(hcd, urb);
@@ -2275,6 +2277,7 @@ static int musb_bus_resume(struct usb_hcd *hcd)
        return 0;
 }
 
+
 const struct hc_driver musb_hc_driver = {
        .description            = "musb-hcd",
        .product_desc           = "MUSB HDRC host driver",
@@ -2298,6 +2301,5 @@ const struct hc_driver musb_hc_driver = {
        .hub_control            = musb_hub_control,
        .bus_suspend            = musb_bus_suspend,
        .bus_resume             = musb_bus_resume,
-       /* .start_port_reset    = NULL, */
        /* .hub_irq_enable      = NULL, */
 };

diff --git a/drivers/usb/musb/musb_procfs.c b/drivers/usb/musb/musb_procfs.c
index 8915b62..8d2b425 100644 (file)
--- a/drivers/usb/musb/musb_procfs.c
+++ b/drivers/usb/musb/musb_procfs.c
@@ -37,6 +37,7 @@
 #include <linux/seq_file.h>
 #include <linux/uaccess.h>     /* FIXME remove procfs writes */
 #include <mach/hardware.h>
+#include <asm/mach-types.h>
 
 #include "musb_core.h"
 
@@ -450,8 +451,8 @@ static int dump_header_stats(struct musb *musb, char *buffer)
                return 0;
        buffer += count;
 
-       code = sprintf(buffer, "OTG state: %s; %sactive\n",
-                       otg_state_string(musb),
+       code = sprintf(buffer, "OTG state: %s:%d; %sactive\n",
+                                                                otg_state_string(musb),musb->xceiv->state,
                        musb->is_active ? "" : "in");
        if (code <= 0)
                goto done;
@@ -583,6 +584,36 @@ static int dump_header_stats(struct musb *musb, char *buffer)
        }
 #endif
 
+#if 0
+  if(machine_is_nokia_rx51()) {
+       unsigned long   flags;
+       u8 func_ctrl_reg, otg_ctrl_reg,debug_reg,pwr_ctrl_reg,usb_intstat_reg;
+
+       spin_lock_irqsave(&musb->lock, flags);
+
+       pwr = musb_readb(musb->mregs, MUSB_POWER);
+       musb_writeb(musb->mregs, MUSB_POWER,pwr & ~MUSB_POWER_ENSUSPEND);
+
+       func_ctrl_reg = musb_ulpi_readb(musb->mregs,ISP1704_FUNC_CTRL);
+       otg_ctrl_reg = musb_ulpi_readb(musb->mregs,ISP1704_OTG_CTRL);
+       debug_reg = musb_ulpi_readb(musb->mregs,ISP1704_DEBUG);
+       pwr_ctrl_reg = musb_ulpi_readb(musb->mregs,ISP1704_PWR_CTRL);
+       usb_intstat_reg = musb_ulpi_readb(musb->mregs,ISP1704_USB_INTSTAT);
+
+       musb_writeb(musb->mregs, MUSB_POWER,pwr);
+
+       spin_unlock_irqrestore(&musb->lock, flags);
+
+
+               code = sprintf(buffer, "ISP1704 func=%02x otg=%02x dbg=%02x pwr=%02x intr_stat=%02x\n",
+                                                                        func_ctrl_reg, otg_ctrl_reg,debug_reg,pwr_ctrl_reg,usb_intstat_reg);
+               if (code <= 0)
+                       goto done;
+               count += code;
+               buffer += code;
+
+       }
+#endif
 done:
        return count;
 }
@@ -591,16 +622,34 @@ done:
  *
  * C soft-connect
  * c soft-disconnect
- * I enable HS
- * i disable HS
- * s stop session
- * F force session (OTG-unfriendly)
+ * D<num> set/query the debug level
  * E rElinquish bus (OTG)
+ * e enumerate
+ * F force session (OTG-unfriendly)
  * H request host mode
  * h cancel host request
+ * I enable HS
+ * i disable HS
+ * J set HS test mode
+ * j clear HS test mode
+ * K set FS test mode
+ * k clear FS test mode
+ * M set host test mode
+ * m clear host test mode
+ * R reset peripheral
+ * r resume root hub
+ * s stop session
  * T start sending TEST_PACKET
- * D<num> set/query the debug level
+ * X term highspeed
+ * Y term fullspeed
+ * Z term lowspeed
+ * 
  */
+
+extern inline void mbusywait(int ms);
+extern void musb_port_reset(struct musb *musb, bool do_reset);
+extern void musb_port_suspend(struct musb *musb, bool do_suspend);
+
 static int musb_proc_write(struct file *file, const char __user *buffer,
                        unsigned long count, void *data)
 {
@@ -608,49 +657,63 @@ static int musb_proc_write(struct file *file, const char __user *buffer,
        u8 reg;
        struct musb *musb = (struct musb *)data;
        void __iomem *mbase = musb->mregs;
+       unsigned long   flags;
+       struct usb_hcd *hcd = musb_to_hcd(musb);
+       struct usb_bus *bus = hcd_to_bus(hcd);
 
        /* MOD_INC_USE_COUNT; */
 
        if (unlikely(copy_from_user(&cmd, buffer, 1)))
                return -EFAULT;
 
+
        switch (cmd) {
        case 'C':
                if (mbase) {
-                       reg = musb_readb(mbase, MUSB_POWER)
-                                       | MUSB_POWER_SOFTCONN;
+                       reg = musb_readb(mbase, MUSB_POWER);
+                       reg |= MUSB_POWER_SOFTCONN;
                        musb_writeb(mbase, MUSB_POWER, reg);
                }
                break;
 
        case 'c':
                if (mbase) {
-                       reg = musb_readb(mbase, MUSB_POWER)
-                                       & ~MUSB_POWER_SOFTCONN;
+                       reg = musb_readb(mbase, MUSB_POWER);
+                       reg &= ~MUSB_POWER_SOFTCONN;
                        musb_writeb(mbase, MUSB_POWER, reg);
                }
                break;
 
        case 'I':
                if (mbase) {
-                       reg = musb_readb(mbase, MUSB_POWER)
-                                       | MUSB_POWER_HSENAB;
+                       reg = musb_readb(mbase, MUSB_POWER);
+                       reg |= MUSB_POWER_HSENAB;
                        musb_writeb(mbase, MUSB_POWER, reg);
                }
                break;
 
        case 'i':
                if (mbase) {
-                       reg = musb_readb(mbase, MUSB_POWER)
-                                       & ~MUSB_POWER_HSENAB;
+                       reg = musb_readb(mbase, MUSB_POWER);
+                       reg &= ~MUSB_POWER_HSENAB;
                        musb_writeb(mbase, MUSB_POWER, reg);
                }
                break;
 
        case 'F':
-               reg = musb_readb(mbase, MUSB_DEVCTL);
-               reg |= MUSB_DEVCTL_SESSION;
-               musb_writeb(mbase, MUSB_DEVCTL, reg);
+               if (mbase) {
+                       reg = musb_readb(mbase, MUSB_DEVCTL);
+                       reg |= MUSB_DEVCTL_SESSION;
+                       musb_writeb(mbase, MUSB_DEVCTL, reg);
+               }
+               break;
+
+       case 's':
+               if (mbase) {
+                       reg = musb_readb(mbase, MUSB_DEVCTL);
+                       reg &= ~MUSB_DEVCTL_SESSION;
+                       musb_writeb(mbase, MUSB_DEVCTL, reg);
+               }
                break;
 
        case 'H':
@@ -679,13 +742,132 @@ static int musb_proc_write(struct file *file, const char __user *buffer,
                }
                break;
 
+       case 'M':
+               if (mbase) {
+                       reg = musb_readb(mbase, MUSB_TESTMODE);
+                       reg |= MUSB_TEST_FORCE_HOST;
+                       musb_writeb(mbase, MUSB_TESTMODE, reg);
+               }
+               break;
+       
+       case 'm':
+               if (mbase) {
+                       reg = musb_readb(mbase, MUSB_TESTMODE);
+                       reg &= ~MUSB_TEST_FORCE_HOST;
+                       musb_writeb(mbase, MUSB_TESTMODE, reg);
+                       MUSB_DEV_MODE(musb);
+                       musb->xceiv->state = OTG_STATE_B_IDLE;
+               }
+               break;
+
+  case 'L':
+                       musb->xceiv->state = OTG_STATE_A_HOST;
+                       MUSB_HST_MODE(musb);
+               break;
+
+  case 'l':
+                       musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
+                       MUSB_HST_MODE(musb);
+               break;
+
+       case 'J':
+               if (mbase) {
+                       reg = musb_readb(mbase, MUSB_TESTMODE);
+                       reg |= MUSB_TEST_FORCE_HS;
+                       musb_writeb(mbase, MUSB_TESTMODE, reg);
+               }
+               break;
+
+       case 'j':
+               if (mbase) {
+                       reg = musb_readb(mbase, MUSB_TESTMODE);
+                       reg &= ~MUSB_TEST_FORCE_HS;
+                       musb_writeb(mbase, MUSB_TESTMODE, reg);
+               }
+               break;
+
+       case 'K':
+               if (mbase) {
+                       reg = musb_readb(mbase, MUSB_TESTMODE);
+                       reg |= MUSB_TEST_FORCE_FS;
+                       musb_writeb(mbase, MUSB_TESTMODE, reg);
+               }
+               break;
+
+       case 'k':
+               if (mbase) {
+                       reg = musb_readb(mbase, MUSB_TESTMODE);
+                       reg &= ~MUSB_TEST_FORCE_FS;
+                       musb_writeb(mbase, MUSB_TESTMODE, reg);
+               }
+               break;
+
+  case 'X':
+    if (mbase)
+                       musb_force_term(mbase,MUSB_TERM_HOST_HIGHSPEED);
+               break;
+
+  case 'Y':
+    if (mbase)
+                       musb_force_term(mbase,MUSB_TERM_HOST_FULLSPEED);
+               break;
+
+  case 'Z':
+    if (mbase)
+                       musb_force_term(mbase,MUSB_TERM_HOST_LOWSPEED);
+               break;
+
+       case 'R':
+               musb_port_reset(musb, true);
+               while (time_before(jiffies, musb->rh_timer))
+                       msleep(1);
+               musb_port_reset(musb, false);
+
+               break;
+               
+  case 'r':
+               usb_hcd_resume_root_hub(hcd);
+               break;
+
+  case 'e':
+               if(bus) 
+                       usb_bus_start_enum(bus,bus->otg_port);
+               break;
+
+       case 'U':
+               /*Suspend*/
+               musb_port_suspend(musb, true);
+               break;
+
+       case 'u':
+               /*Resume*/
+               musb_port_suspend(musb, false);
+               /*How to end sanely? */
+               musb_port_reset(musb, true);
+               while (time_before(jiffies, musb->rh_timer))
+                       msleep(1);
+               musb_port_reset(musb, false);
+
+       break;
+
        case '?':
                INFO("?: you are seeing it\n");
                INFO("C/c: soft connect enable/disable\n");
                INFO("I/i: hispeed enable/disable\n");
                INFO("F: force session start\n");
-               INFO("H: host mode\n");
+               INFO("H/h: host mode request/cancel host request\n");
                INFO("T: start sending TEST_PACKET\n");
+               INFO("X: term highspeed\n");
+               INFO("Y: term fullspeed\n");
+               INFO("Z: term lowspeed\n");
+               INFO("K/k: set/clear FS test mode\n");
+               INFO("M/m: set/clear host test mode\n");
+               INFO("J/j: set/clear HS test mode\n");
+               INFO("E: rElinquish bus (OTG)\n");
+               INFO("e: enumerate\n");
+               INFO("R: reset peripheral\n");
+               INFO("r: resume root hub\n");
+               INFO("s: stop session\n");
                break;
 
        default:
@@ -695,6 +877,7 @@ static int musb_proc_write(struct file *file, const char __user *buffer,
 
        musb_platform_try_idle(musb, 0);
 
+
        return count;
 }
 
@@ -709,6 +892,8 @@ static int musb_proc_read(char *page, char **start,
 
        count -= off;
        count -= 1;             /* for NUL at end */
+       count -= 20; /* Padding */
+
        if (count <= 0)
                return -EINVAL;
 
@@ -720,6 +905,9 @@ static int musb_proc_read(char *page, char **start,
                count -= code;
        }
 
+       if (count < 0)
+               goto done;
+
        /* generate the report for the end points */
        /* REVISIT ... not unless something's connected! */
        for (epnum = 0; count >= 0 && epnum < musb->nr_endpoints;
@@ -728,14 +916,22 @@ static int musb_proc_read(char *page, char **start,
                if (code > 0) {
                        buffer += code;
                        count -= code;
+                       if (count < 0)
+                               goto done;
                }
        }
 
+
+ done:
+
        musb_platform_try_idle(musb, 0);
 
        spin_unlock_irqrestore(&musb->lock, flags);
        *eof = 1;
 
+       if(count < 0)
+               return -EINVAL;
+
        return buffer - page;
 }
 

diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
index 7e7900f..770937f 100644 (file)
--- a/drivers/usb/musb/musb_virthub.c
+++ b/drivers/usb/musb/musb_virthub.c
@@ -46,7 +46,7 @@
 #include "musb_core.h"
 
 
-static void musb_port_suspend(struct musb *musb, bool do_suspend)
+void musb_port_suspend(struct musb *musb, bool do_suspend)
 {
        u8              power;
        void __iomem    *mbase = musb->mregs;
@@ -106,11 +106,13 @@ static void musb_port_suspend(struct musb *musb, bool do_suspend)
 
                /* later, GetPortStatus will stop RESUME signaling */
                musb->port1_status |= MUSB_PORT_STAT_RESUME;
-               musb->rh_timer = jiffies + msecs_to_jiffies(20);
+               /*OMAP documentation states range of 10-15 ms */
+               musb->rh_timer = jiffies + msecs_to_jiffies(13);
+               //              musb->rh_timer = jiffies + msecs_to_jiffies(20);
        }
 }
 
-static void musb_port_reset(struct musb *musb, bool do_reset)
+void musb_port_reset(struct musb *musb, bool do_reset)
 {
        u8              power;
        void __iomem    *mbase = musb->mregs;
@@ -131,7 +133,7 @@ static void musb_port_reset(struct musb *musb, bool do_reset)
         */
        power = musb_readb(mbase, MUSB_POWER);
        if (do_reset) {
-
+               DBG(4, "root port reset started\n");
                /*
                 * If RESUME is set, we must make sure it stays minimum 20 ms.
                 * Then we must clear RESUME and wait a bit to let musb start

diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index a712bc9..276ee85 100644 (file)
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -77,11 +77,14 @@ static void musb_do_idle(unsigned long _musb)
 
        switch (musb->xceiv->state) {
        case OTG_STATE_A_WAIT_BCON:
+               if(host_mode(musb->mregs))
+                       break; /*Don't time out*/
+
                devctl &= ~MUSB_DEVCTL_SESSION;
                musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
 
                devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
-               if (devctl & MUSB_DEVCTL_BDEVICE) {
+               if (!host_mode(musb->mregs)) {
                        musb->xceiv->state = OTG_STATE_B_IDLE;
                        MUSB_DEV_MODE(musb);
                } else {
@@ -109,11 +112,14 @@ static void musb_do_idle(unsigned long _musb)
 #endif
 #ifdef CONFIG_USB_MUSB_HDRC_HCD
        case OTG_STATE_A_HOST:
+
+
                devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
-               if (devctl &  MUSB_DEVCTL_BDEVICE)
+               if (!host_mode(musb->mregs))
                        musb->xceiv->state = OTG_STATE_B_IDLE;
-               else
-                       musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
+               /*Don't time out if host*/
+               //              else
+               //      musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
 #endif
        default:
                break;
@@ -133,7 +139,7 @@ void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
        /* Never idle if active, or when VBUS timeout is not set as host */
        if (musb->is_active || ((musb->a_wait_bcon == 0)
                        && (musb->xceiv->state == OTG_STATE_A_WAIT_BCON))) {
-               DBG(4, "%s active, deleting timer\n", otg_state_string(musb));
+               DBG(6, "%s active, deleting timer\n", otg_state_string(musb));
                del_timer(&musb_idle_timer);
                last_timer = jiffies;
                return;
@@ -143,13 +149,13 @@ void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
                if (!timer_pending(&musb_idle_timer))
                        last_timer = timeout;
                else {
-                       DBG(4, "Longer idle timer already pending, ignoring\n");
+                       DBG(6, "Longer idle timer already pending, ignoring\n");
                        return;
                }
        }
        last_timer = timeout;
 
-       DBG(4, "%s inactive, for idle timer for %lu ms\n",
+       DBG(6, "%s inactive, for idle timer for %lu ms\n",
                otg_state_string(musb),
                (unsigned long)jiffies_to_msecs(timeout - jiffies));
        mod_timer(&musb_idle_timer, timeout);
@@ -182,8 +188,14 @@ static void omap_set_vbus(struct musb *musb, int is_on)
                musb->xceiv->default_a = 1;
                musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
                devctl |= MUSB_DEVCTL_SESSION;
-
                MUSB_HST_MODE(musb);
+               
+               if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) {
+                       /*Power is already applied. Skip VRISE and go directly to BCON.*/
+                       musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
+               }
+
+
        } else {
                musb->is_active = 0;
 
@@ -420,7 +432,7 @@ void musb_restore_ctx_and_resume(struct usb_gadget *gadget)
        u8 r;
        unsigned long   flags;
 
-       DBG(3, "restoring register context\n");
+       DBG(3, "restoring register context for %s\n","musb_restore_ctx_and_resume");
 
        if (musb->board && musb->board->xceiv_power)
                musb->board->xceiv_power(1);
@@ -431,13 +443,17 @@ void musb_restore_ctx_and_resume(struct usb_gadget *gadget)
        else
                clk_enable(musb->clock);
 
-       /* Recover OTG control */
-       r = musb_ulpi_readb(musb->mregs, ISP1704_OTG_CTRL);
-       r |= ISP1704_OTG_CTRL_IDPULLUP | ISP1704_OTG_CTRL_DP_PULLDOWN;
-       musb_ulpi_writeb(musb->mregs, ISP1704_OTG_CTRL, r);
-
+       if(host_mode(musb->mregs)) {
+               musb_force_term(musb->mregs,MUSB_TERM_HOST_FULLSPEED);
+               r = musb_ulpi_readb(musb->mregs,ISP1704_FUNC_CTRL);
+       } else {
+               /* Recover OTG control */
+               r = musb_ulpi_readb(musb->mregs, ISP1704_OTG_CTRL);
+               r |= ISP1704_OTG_CTRL_IDPULLUP | ISP1704_OTG_CTRL_DP_PULLDOWN;
+               musb_ulpi_writeb(musb->mregs, ISP1704_OTG_CTRL, r);
+               r = ISP1704_FUNC_CTRL_FULL_SPEED;
+       }
        /* Recover FUNC control */
-       r = ISP1704_FUNC_CTRL_FULL_SPEED;
        r |= ISP1704_FUNC_CTRL_SUSPENDM | ISP1704_FUNC_CTRL_RESET;
        musb_ulpi_writeb(musb->mregs, ISP1704_FUNC_CTRL, r);
 

diff --git a/drivers/usb/otg/otg.c b/drivers/usb/otg/otg.c
index f928b0b..cc890ab 100644 (file)
--- a/drivers/usb/otg/otg.c
+++ b/drivers/usb/otg/otg.c
@@ -160,7 +160,8 @@ int is_targeted(struct usb_device *dev)
 
        /* add other match criteria here ... */
 
-
+       return 1;
+       
        /* OTG MESSAGE: report errors here, customize to match your product */
        dev_err(&dev->dev, "device v%04x p%04x is not supported\n",
                le16_to_cpu(dev->descriptor.idVendor),

diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c
index ecffb2a..7c1672f 100644 (file)
--- a/drivers/usb/otg/twl4030-usb.c
+++ b/drivers/usb/otg/twl4030-usb.c
@@ -239,9 +239,9 @@
 
 enum linkstat {
        USB_LINK_UNKNOWN = 0,
-       USB_LINK_NONE,
-       USB_LINK_VBUS,
-       USB_LINK_ID,
+       USB_LINK_NONE = 1,
+       USB_LINK_VBUS = 2,
+       USB_LINK_ID = 3,
 };
 
 struct twl4030_usb {